PDF(48.7 KB) View with Adobe Reader on a variety of devices
Updated:December 23, 2013
Document ID:1458423743129181
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL6442
Cisco
® announces the end-of-sale and end-of life dates for the Cisco CRS-1 Series Modular Services Card. The last day to order the affected product(s) is June 30, 2009. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco CRS-1 Series Modular Services Card
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
June 30, 2008
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
June 30, 2009
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
September 29, 2009
End of SW Maintenance Releases Date: HW
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software.
June 29, 2012
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
June 30, 2010
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
June 30, 2010
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
September 28, 2013
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
June 29, 2014
HW = Hardware
OS SW = Operating System Software App.
SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
CRS-MSC
Cisco CRS-1 Series Modular Services Card
See the Product Migration Options section below for detailed information on replacing this product.
CRS-MSC-20G
Cisco CRS-1 Series Modular Services Card 20G
CRS-MSC-20G-B
Cisco CRS-1 Series Modular Services Card revision B 20G
CRS-MSC-20G=
Cisco CRS-1 Series Modular Services Card 20G
CRS-MSC-20G-B=
Cisco CRS-1 Series Modular Services Card revision B 20G
CRS-MSC-40G
Cisco CRS-1 Series Modular Services Card 40G
CRS-MSC-40G-B
Cisco CRS-1 Series Modular Services Card revision B 40G
CRS-MSC-40G=
Cisco CRS-1 Series Modular Services Card 40G
CRS-MSC-40G-B=
Cisco CRS-1 Series Modular Services Card revision B 40G
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to:
http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the Cisco CRS-1 Series Modular Services Card through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to:
http://www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.