Distinctive Ring Settings on SPA8000 Phone Adapter

Available Languages

Download Options

  • PDF     (138.4 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (152.7 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (194.3 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 14, 2017
Document ID:SMB2449

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Distinctive Ring Settings on SPA8000 Phone Adapter

Objective

Distinctive ring settings help you customize ring tone patterns for different numbers. There are nine ring types to configure with distinctive ring patterns. These distinctive ring setups are used to distinguish different telephone numbers on the same phone line. This document outlines the procedures to set distinctive ring settings on a SPA8000.

Applicable Device

  • SPA8000

Software Version

  • 6.1.12

Distinctive Ring Settings

Step 1. Log in to the web configuration utility and choose Advanced > Voice > L1-L8. The Line page opens:

Note: There are 9 lines available for configuration. The user indicates which line needs to be configured for distinctive ring settings in Step 1 by the selection one of the desired line number.

Step 2. On the Line page, scroll down to the Distinctive Ring Settings section.

Step 3. Enter a caller number pattern to play Distinctive Ring/Call Waiting Tone (CWT) 1, 2, 3, 4, 5, 6, 7, 8, or 9 in the Ring(1-9) Caller field. It is blank by default.

Note: To modify the distinctive rings and CWT refer to the articles, Call Forward Settings on the SPA8000 Phone Adapter and Configure Ring Settings on the SPA8000 Phone Adapter.

Step 4. Click Submit All Changes.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products