Configure QoS Setting on SPA122

Available Languages

Download Options

  • PDF     (84.4 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (121.9 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (79.9 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB2691

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configure QoS Setting on SPA122

Objective

QoS helps to ensure that voice is prioritized during periods of heavy traffic and it is enabled by default. The objective of this article is to guide on how to configure QoS settings.

Applicable Devices

• SPA122

Configure QoS Setting

 

Step 1. At the phone adapter configuration utility, choose Network Setup > Application > QoS. The QoS page opens up. It contains the following fields:

• QoS Policy — Choose whether you need the feature to be enabled always or only when there is voice traffic.The possible values are:

– Always On — Click this option if you want to enable QoS at all times.

– On When Phone In Use — Click this option if you want to enable QoS only when there is voice traffic.

• Upstream Bandwidth — Specifies the maximum available upstream bandwidth value provided by the Internet Service Provider. The range is from 64 to 100000 kbps. The default value is 10000 kbps.

Note: Setting this value higher than the available service bandwidth can result in traffic being dropped arbitrarily in the  service provider's network.

Step 2. Click Submit to save the settings.

 

A status message is displayed confirming that the settings have been saved.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products