Table Of Contents
WIC-1ADSL, WIC-1ADSL-DG, and WIC-1ADSL-I-DG Documentation Roadmap
Product Information and Supported Hardware and Software
Regulatory Compliance and Safety Information
WIC-1ADSL, WIC-1ADSL-DG, and WIC-1ADSL-I-DG Documentation Roadmap
Updated 9/21/2004
This document provides links to resources for understanding, installing, and configuring ADSL WAN interface cards (WICs). Use this document in HTML format on Cisco.com.
Products:
WIC-1ADSL
1-port ADSL-over-POTS WAN interface card
WIC-1ADSL-DG
1-port ADSL-over-POTS with dying gasp WAN interface card
WIC-1ADSL-I-DG
1-port ADSL-over-ISDN with dying gasp WAN interface card
Note This is a platform-independent document. To see which routers support these products, refer to the documents in the following section.
Product Information and Supported Hardware and Software
•ADSL WAN Interface Cards for the Cisco 1700, 2600, and 3700 Series Modular Access Routers, data sheet
•Cisco 1700/2600/3600 ADSL WIC Frequently Asked Questions, FAQs
•ADSL WAN Interface Card (WIC) for Cisco 1700/2600/3600 Series Routers, Q & A
•Cisco DSL Router Configuration and Troubleshooting Guide—ADSL WIC, how-to
Service Categories
•Understanding the CBR Service Category for ATM VCs, tech note
•Understanding the Variable Bit Rate Real Time (VBR-rt) Service Category for ATM VCs, tech note
•Understanding the VBR-nrt Service Category and Traffic Shaping for ATM VCs, tech note
Regulatory Compliance and Safety Information
•Cisco Network Modules and Interface Cards Regulatory Compliance and Safety Information
Hardware Installation
See the following chapters of the Cisco Interface Cards Hardware Installation Guide:
•Installing Cisco Interface Cards in Cisco Access Routers
•Connecting DSL WAN Interface Cards to a Network
See also:
•DSL Modem/Router Interface Pinouts and Status LED Descriptions, tech note
Interface Numbering
•Overview in the hardware installation documentation for your router
Software Configuration
•Configuring an ADSL WAN Interface Card on Cisco 1700 Series Routers, configuration note
•1-Port ADSL WAN Interface Card, Cisco IOS Releases 12.2(13)ZH, 12.2(15)ZJ, and 12.3(4)T feature module
•1-Port ADSL WAN Interface Card for Cisco 2600 Series and Cisco 3600 Series Routers, Cisco IOS Release 12.2(4)T feature module
•1-Port ADSL WAN Interface Card, Cisco IOS Releases 12.1(3)XJ and 12.2(2)T feature module
•1-Port ADSL WAN Interface Card, Cisco IOS Release 12.1(5)YB feature module
•Cisco DSL Router Configuration and Troubleshooting Guide, how-to
Voice and QoS Features
•Enhanced Voice and QoS for ADSL and G.SHDSL, Cisco IOS Release 12.3(2)T feature module
•Enhanced Voice and QoS for ADSL and G.SHDSL on Cisco 1700 Series, Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers, Cisco IOS Releases 12.2(8)YN and 12.2(13)T feature module
•Voice and Quality of Service Features for ADSL and G.SHDSL on Cisco 1700, Cisco 2600, and Cisco 3600 Series Routers, Cisco IOS Releases 12.2(4)XL and 12.2(13)T feature module
Troubleshooting
•Troubleshooting Layer 1 on a Cisco 1700/2600/3600 ADSL WIC, tech note
•Cisco DSL Router Configuration and Troubleshooting Guide, how-to
Configuration Examples
•Configuring IPSec Over ADSL on a Cisco 2600/3600 With ADSL-WIC and Hardware Encryption Modules, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC With a Single IP Address, DHCP, PPPoA, and PPP-PAP, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC With IP Unnumbered E0, DHCP, PPPoA, and PPP-PAP, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC With IP Unnumbered E0, PPPoA, PPP-PAP, and Manually Configured Local LAN Devices, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC (Unnumbered Interface) With RFC1483 Routing Using AAL5SNAP Protocol IP, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC With RFC1483 Routing Using AAL5SNAP Protocol IP, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC Using PPPoA With CHAP and PAP, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC With IRB and NAT Using RFC1483 Bridging, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC With NAT, a DHCP Server, and Easy IP Using PPPoA (aal5mux ppp), sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC as a PPPoE Client With NAT, sample configuration
•Configuring Network Address Translation and Static Port Address Translation to Support an Internal Web Server, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC With AAL5MUX IP Routing, Multiple PVCs, and Terminating on a Cisco 6400 UAC-NRP, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC to Support PPPoE Clients, Terminating on a Cisco 6400 UAC, sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC and a Cisco 6400 Configured With IRB Using RFC1483 Bridging (aal5snap), sample configuration
•Configuring a Cisco 1700/2600/3600 ADSL WIC and a Cisco 6400 in RBE Mode Using RFC1483 Bridging, sample configuration
Copyright © 2004 Cisco Systems, Inc. All rights reserved.