Table Of Contents
Release Notes for Cisco Wireless Control System Navigator, Release 1.6.220.0
Requirements for Cisco WCS Navigator
Hardware Requirements for Cisco WCS Navigator
WCS and Navigator Compatibility
Japanese Microsoft Windows Support
Obtaining Documentation and Submitting a Service Request
Release Notes for Cisco Wireless Control System Navigator, Release 1.6.220.0
First Published: October 25, 2011OL-21030-06These release notes describe open and resolved caveats for Cisco Wireless Control System Navigator maintenance release 1.6.220.0.
Cisco Wireless Control System Navigator is referred to as Cisco WCS Navigator in this document.
Contents
These release notes contain the following sections:
•
Requirements for Cisco WCS Navigator
•
Obtaining Documentation and Submitting a Service Request
Introduction
Cisco WCS Navigator manages multiple Cisco WCSs (running the same release as Cisco WCS Navigator) and provides a unified view of the network. Cisco WCS Navigator uses SOAP/XML over HTTPS to communicate with individual WCSs. Cisco WCS Navigator provides monitoring functionality and reporting capability across all WCSs. In addition, network-wide searches are available. In Windows and Linux operating systems, Cisco WCS Navigator runs as a service and resumes running after a reboot.
Cisco WCS Navigator delivers an aggregated platform for enhanced scalability, manageability, and visibility of large-scale implementations of the Cisco Unified Wireless Network. This software-based solution gives network administrators easy access to information from multiple, geographically diverse Cisco WCS management platforms. Cisco WCS Navigator supports partitioning of the unified wireless network at the management level.
Cisco WCS Navigator Features
Cisco WCS Navigator has the following features:
•
Management of multiple Cisco WCSs
–
Supports up to 20 Cisco WCS management platforms
–
Management of up to 50,000 Cisco Aironet lightweight access points from a single management console
•
A unified view of the network
•
Overview and multilevel monitoring of wireless networks
•
Ability to run reports for all Cisco WCSs
•
Network-wide searches
•
A link to return to Cisco WCS Navigator when directed to a regional Cisco WCS from Cisco WCS Navigator
Requirements for Cisco WCS Navigator
This section describes the hardware requirements, client requirements, and the supported operating systems.
Hardware Requirements for Cisco WCS Navigator
The following server hardware and software are required to support Cisco WCS Navigator for Windows or Linux operating systems:
•
A minimum of 3.2-GHz Intel Dual Core processor with 4 GB of RAM and an 80 GB of hard drive
•
A minimum of 40-GB disk space on your hard drive
Up to 20 wireless control systems are supported depending on the Cisco WCS Navigator license.
![]()
Note
For all server levels, AMD processors, which are equivalent to the listed Intel processors, are also supported.
![]()
Note
The available disk space listed is a minimum requirement but might be different for your system depending on the number of backups.
![]()
Note
The recommended screen resolution for Cisco WCS Navigator is 1024 x 768 pixels.
Client Requirements
The following web browsers on a Windows platform are recommended for best results:
•
Windows Internet Explorer 7 or later releases with the Flash plugin
•
Mozilla Firefox 3.0 or later releases
Using a web browser running on Windows Server 2003 to access the Cisco WCS Navigator web GUI is not recommended because Windows Server 2003 security settings may result in browsing problems.
The client running the web browser must have a minimum of 1 GB of RAM and a 2-GHz processor. The client device should not be running any CPU or memory-intensive applications.
![]()
Note
For both Cisco WCS and Cisco WCS Navigator, we recommend a minimum screen resolution of
1024 x 768 pixels.
Supported Operating Systems
The following operating systems are supported:
•
Windows Server 2003 SP2 or later releases with all critical and security Windows updates installed. Windows Server 2003 64-bit installations are not supported.
![]()
Note
Windows Server 2003 32-bit installations provide support for up to 64 GB of RAM if the Physical Address Extension (PAE) is enabled. See the Windows documentation for instructions on enabling this mode.
•
Red Hat Enterprise Linux Server 5.x—Only 32-bit operating system installations are supported.
![]()
Note
Red Hat Enterprise Linux Server 5.x—64-bit operating system installations are not supported.
![]()
Note
A 32-bit operating system running on 64-bit capable hardware is supported for both Windows and Linux operating systems.
•
Windows Server 2003 and Red Hat Linux support on VMware ESX 3.0.1 and later releases.
![]()
Note
VMware must be installed on a system with these minimum requirements:
Quad CPU running at 3.16 GHz
8-GB RAM
200-GB hard drive
![]()
Note
Individual operating systems running WCS in VMware must follow the specifications for the number of WCSs that you intend to use.
Important Notes
This section describes the operational notes for Cisco WCS Navigator.
WCS and Navigator Compatibility
Cisco WCS and Cisco WCS Navigator must be from the same release in order to be compatible (see Table 1). Although the release numbers may vary, you must verify whether they were part of the same release.
For example, Cisco WCS Navigator 1.0 is compatible with Cisco WCS 4.1, and Cisco WCS Navigator 1.1.x is compatible with any Cisco WCS 4.2.x.
For more information about Cisco wireless software compatibility, see http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html.
![]()
Note
When Cisco WCS Navigator is upgraded to a new version, the corresponding Cisco WCS must also be upgraded to the corresponding new version. For example, if Cisco WCS Navigator is upgraded to version 1.6, Cisco WCS must also be upgraded to the corresponding version 7.0.
![]()
Note
Ensure that the MAX HEAP SIZE is set to 1024m in the startServer.bat file if you are using MS Windows or startServer.sh file if you are using Linux. If set to a lesser value, it may result in an OutOfMemoryException.
Japanese Microsoft Windows Support
Cisco WCS Navigator can also be used on a server using the Japanese version of the Microsoft Windows operating system. By default, Cisco WCS Navigator runs in English.
Adobe Flash Player 9.0.115.0
Adobe Flash Player 9.0.115.0 is required.
Caveats
The following sections list Open Caveats and Resolved Caveats for this release. For your convenience in locating caveats in Cisco's Bug Toolkit, the caveat titles listed in this section are taken directly from the Bug Toolkit database. These caveat titles are not intended to be read as complete sentences because the title field length is limited. In the caveat titles, some truncation of wording or punctuation might be necessary to provide the most complete and concise description. The only modifications made to these titles are as follows:
•
Commands are in boldface type.
•
Product names and acronyms may be standardized.
•
Spelling errors and typographical errors may be corrected.
![]()
Note
If you are a registered cisco.com user, see Bug Toolkit on cisco.com at the following website:
http://tools.cisco.com/Support/BugToolKit/
To become a registered cisco.com user, go to the following website:
http://tools.cisco.com/RPF/register/register.do
Open Caveats
There are no open caveats in this release.
Resolved Caveats
There are no resolved caveats in this release.
If You Need More Information
If you need information about a specific caveat that does not appear in these release notes, you can use the Cisco Bug Toolkit to find caveats of any severity. Click this URL to browse to the Bug Toolkit:
http://tools.cisco.com/Support/BugToolKit/
If you request a defect that cannot be displayed, the defect number might not exist, the defect might not yet have a customer-visible description, or the defect might be marked Cisco Confidential.
Troubleshooting
For the most up-to-date, detailed troubleshooting information, see the Cisco TAC website at the following location:
http://www.cisco.com/cisco/web/support/index.html
Click Wireless and then choose Produts > Wireless > Wireless LAN Management > Unified Wireless LAN Management.
Related Documentation
For information about installing Cisco WCS Navigator, see the Cisco Wireless Control System Navigator 1.6.172 Installation Guide.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2011 Cisco Systems, Inc. All rights reserved.