- About this Document
- Introduction
- Internetworking Design Basics
- Designing Large-Scale IP Internetworks
- Designing SRB Internetworks
- Designing SDLC, SDLLC, and QLLC Internetworks
- Designing APPN Internetworks
- Designing DLSw+ Internetworks
- Designing ATM Internetworks
- Designing Packet Service Internetworks
- Designing DDR Internetworks
- Designing ISDN Internetworks
- Designing Switched LAN Internetworks
- Designing Internetworks for Multimedia
- RIP and OSPF Redistribution
- Dial-on-Demand Routing
- Increasing Security on IP Networks
- Integrating Enhanced IGRP into Existing Networks
- Reducing SAP Traffic in Novell IPX Networks
- UDP Broadcast Flooding
- STUN for Front-End Processors
- Using ISDN Effectively in Multiprotocol Networks
- Using HSRP for Fault-Tolerant IP Routing
- LAN Switching
- Multicasting in IP and AppleTalk Networks
- Scaling Dial-on-Demand Routing
- Large-Scale H.323 Network Design for Service Providers
- Appendix A: Subnetting an IP Address Space
- Appendix B: IBM Serial Link Implementation Notes
- Appendix C: SNA Host Configuration for SRB Networks
- Appendix D: SNA Host Configuration for SDLC Networks
- Appendix E: Broadcasts in Switched LAN Internetworks
- Appendix F: References and Recommended Reading
Chapter 12
Designing Switched LAN Internetworks - This Documentation Has Moved
You have reached this page because the Internetwork Design Guide content has moved to DocWiki. The design guide provides internetworking design with the intent to help you identify and implement practical internetworking strategies that are both flexible and scalable.
Please update your bookmark to the new link:
http://docwiki.cisco.com/wiki/Internetwork_Design_Guide
Feedback