NetFlow Layer 2 and Security Monitoring Exports

Available Languages

Download Options

  • PDF     (149.7 KB)
    View with Adobe Reader on a variety of devices
Updated:May 1, 2006

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

NetFlow Layer 2 and Security Monitoring Exports

Table Of Contents

NetFlow Layer 2 and Security Monitoring Exports


NetFlow Layer 2 and Security Monitoring Exports

NetFlow Layer 2 and Security Monitoring Exports improves your ability to detect and analyze network threats such as denial of service (DoS) attacks by increasing the number of fields from which NetFlow can capture the values.

Configuration Information

Configuration information is included in the "NetFlow Layer 2 and Security Monitoring Exports" chapter in the Cisco IOS NetFlow Configuration Guide, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124tcg/tnf_c/ch15/nfhtsec.htm

Command Reference Information

Command reference information is included in the Cisco IOS NetFlow Command Reference, Release 12.2SR, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sr/cr/srnf_r/

New or Modified Commands

The following command is new or modified for this feature:

•ip flow-capture

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2006 Cisco Systems, Inc. All rights reserved.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco