Cisco IOS CMTS Cable Software Configuration Guide, Release 12.2SC - Unique Device Identifier Retrieval for the Cisco CMTS [Cisco uBR10000 Series Universal Broadband Routers]

Table Of Contents

Unique Device Identifier Retrieval for the Cisco CMTS

Contents

Prerequisites for Unique Device Identifier Retrieval

Information About Unique Device Identifier Retrieval

Unique Device Identifier Overview

Benefits of the Unique Device Identifier Retrieval Feature

Product Item Descriptor (PID) for Cable Products

How to Retrieve the Unique Device Identifier

Retrieving the Unique Device Identifier

Troubleshooting Tips

Configuration Examples for Unique Device Identifier Retrieval

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Command Reference

Unique Device Identifier Retrieval for the Cisco CMTS

Revised: February 5, 2007, OL-1467-08

The Unique Device Identifier Retrieval (UDI retrieval) feature provides the ability to retrieve and display the Unique Device Identifier (UDI) information from any Cisco product that has electronically stored such identity information.

Feature History for the Unique Device Identifier Retrieval Feature

Release

Modification

12.3(13)BC

This feature was integrated into Cisco IOS Release 12.3(13)BC.

Software images for the Cisco uBR10012 universal broadband router, Cisco uBR7246VXR universal broadband router, and the Cisco uBR7100 series universal broadband routers are deferred to Cisco IOS Release 12.3(13)BC.

Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.

Contents

•Prerequisites for Unique Device Identifier Retrieval

•Information About Unique Device Identifier Retrieval

•How to Retrieve the Unique Device Identifier

•Configuration Examples for Unique Device Identifier Retrieval

•Additional References

•Command Reference

Prerequisites for Unique Device Identifier Retrieval

In order to use UDI retrieval, the Cisco product in use must be UDI-enabled. A UDI-enabled Cisco product supports five required Entity MIB objects. The five Entity MIB v2 (RFC-2737) objects are as follows:

•entPhysicalName

•entPhysicalDescr

•entPhysicalModelName

•entPhysicalHardwareRev

•entPhysicalSerialNum

Although the show inventory command may be available, using that command on devices that are not UDI-enabled will likely produce no output.

Information About Unique Device Identifier Retrieval

Before using the UDI Retrieval feature, you should understand the following concepts:

•Unique Device Identifier Overview

•Benefits of the Unique Device Identifier Retrieval Feature

•Product Item Descriptor (PID) for Cable Products

Unique Device Identifier Overview

Each identifiable product is an entity, as defined by the Entity MIB (RFC-2737) and its supporting documents. Some entities, such as a chassis, will have subentities like slots. An Ethernet switch might be a member of a superentity like a stack. Most Cisco entities that are orderable products will leave the factory with an assigned UDI. The UDI information is printed on a label that is affixed to the physical hardware device, and it is also stored electronically on the device in order to facilitate remote retrieval.

A UDI consists of the following elements:

•Product identifier (PID)

•Version identifier (VID)

•Serial number (SN)

The PID is the name by which the product can be ordered; it has been historically called the "Product Name" or "Part Number." This is the identifier that one would use to order an exact replacement part.

The VID is the version of the product. Whenever a product has been revised, the VID will be incremented. The VID is incremented according to a rigorous process derived from Telcordia GR-209-CORE, an industry guideline that governs product change notices.

The SN is the vendor-unique serialization of the product. Each manufactured product will carry a unique serial number assigned at the factory, which cannot be changed in the field. This is the means by which to identify an individual, specific instance of a product.

Benefits of the Unique Device Identifier Retrieval Feature

•Identifies individual Cisco products in your networks.

•Reduces operating expenses for asset management through simple, cross-platform, consistent identification of Cisco products.

•Identifies PIDs for replaceable products.

•Facilitates discovery of products subject to recall or revision.

•Automates Cisco product inventory (capital and asset management).

•Provides a mechanism to determine the entitlement level of a Cisco product for repair and replacement service.

Product Item Descriptor (PID) for Cable Products

The following is a list of product numbers for cable products. These products can be identified using UDI software.

Cisco uBR10012

Cisco uBR7200VXR

Other

UBR10012 (chassis)

UBR-7246VXR (chassis)

UBR7111 (chassis)

UBR10-DSPL=

UBR-MC28U

UBR7114 (chassis)

PRE2

UBR-MC28X

UBR7111E (chassis)

UBR10-PWR-AC

UBR-MC16U

UBR7114E (chassis)

UBR10-PWR-DC

UBR-MC16X

—

UBR10-1GE

UBR7200-NPE-G1

NPE-400

UBR10-1OC12/P-SMI

UBR7200-I/O-2FE/E

NPE-G1

UBR10-TCC+ -T1

—

—

UBR10-MC5X20U-D

—

—

UBR10-1GE

—

—

How to Retrieve the Unique Device Identifier

This section contains the following task:

•Retrieving the Unique Device Identifier (required)

Retrieving the Unique Device Identifier

Perform this task to retrieve and display identification information for a Cisco product.

SUMMARY STEPS

1. enable

2. show inventory [raw]

DETAILED STEPS

Step 1 enable

Enters privileged EXEC mode. Enter your password if prompted.
Router> enable
Step 2 show inventory [raw]

Enter the show inventory command to retrieve and display information about all of the Cisco products installed in the networking device that are assigned a PID, VID, and SN. If a Cisco entity is not assigned a PID, that entity is not retrieved or displayed.
Router# show inventory
NAME: "", DESCR: "uBR10000 chassis, Hw Serial#: SPE08450FQA, Hw Revision: 1.1" 
PID: uBR10000 , VID: 1.1, SN: SPE08450FQA 
NAME: "slot 0/0/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "Routing Processor" 
PID: Routing Processor , VID: 1.0, SN: CAT09030GVK 
NAME: "PRE_A:FastEthernet0/0/0", DESCR: "Network Management Ethernet" 
PID: Network Management Ethernet, VID: , SN: 
NAME: "", DESCR: "Temperature Sensor" 
PID: Temperature Sensor, VID: , SN: 
NAME: "", DESCR: "Forwarding Processor" 
PID: Forwarding Processor, VID: 1.0, SN: CAT09030GBL 
NAME: "slot 0/1/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 1/0/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 1/1/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 2/0/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "1gigethernet-1" 
PID: 1gigethernet-1 , VID: 1.0, SN: CAB0542KX74 
NAME: "GigabitEthernet2/0/0", DESCR: "Gigabit Ethernet MAC Controller" 
PID: Gigabit Ethernet MAC Controller, VID: Unknown Rev, SN: 
NAME: "slot 2/1/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 3/0/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "1oc12pos-1" 
PID: 1oc12pos-1 , VID: 2.0, SN: CAB0437ECQU 
NAME: "POS3/0/0", DESCR: "Skystone 4302 Sonet Framer" 
PID: Skystone 4302 Sonet Framer, VID: 0xFFFF, SN: 
NAME: "slot 3/1/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 4/0/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 4/1/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 5/0/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 5/1/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "MC520S_D_connector" 
PID: MC520S_D_connector, VID: 1.1, SN: CAT08510MM0 
NAME: "Cable5/1-MAC0", DESCR: "UBR10000 CLC" 
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-MAC1", DESCR: "UBR10000 CLC" 
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-MAC2", DESCR: "UBR10000 CLC" 
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-MAC3", DESCR: "UBR10000 CLC" 
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-MAC4", DESCR: "UBR10000 CLC" 
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-US0", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US1", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US2", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US3", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US4", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US5", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US6", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US7", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US8", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US9", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US10", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US11", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US12", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US13", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US14", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US15", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US16", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US17", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US18", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US19", DESCR: "LBT4522 PHY" 
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-DS0", DESCR: "BCM3033 PHY" 
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "Cable5/1-DS1", DESCR: "BCM3033 PHY" 
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "Cable5/1-DS2", DESCR: "BCM3033 PHY" 
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "Cable5/1-DS3", DESCR: "BCM3033 PHY" 
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "Cable5/1-DS4", DESCR: "BCM3033 PHY" 
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "slot 6/0/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 6/1/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 7/0/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 7/1/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 8/0/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "slot 8/1/0", DESCR: "Chassis Slot" 
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "Container for Power Supply" 
PID: Container for Power Supply, VID: , SN: 
NAME: "", DESCR: "Power Supply" 
PID: Power Supply , VID: , SN: 
NAME: "", DESCR: "Power Supply" 
PID: Power Supply , VID: , SN: 
NAME: "", DESCR: "Container for Fan Tray" 
PID: Container for Fan Tray, VID: , SN: 
NAME: "", DESCR: "Fan Tray" 
PID: Fan Tray , VID: , SN: 
NAME: "", DESCR: "Fan" 
PID: Fan , VID: , SN: 
NAME: "", DESCR: "Fan" 
PID: Fan , VID: , SN: 
NAME: "", DESCR: "Backplane" 
PID: Backplane , VID: 1.1, SN: SPE08450FQA 
For diagnostic purposes, the show inventory command can be used with the raw keyword to display every RFC 2737 entity including those without a PID, UDI, or other physical identification.

Note The raw keyword option is primarily intended for troubleshooting problems with the show inventory command itself.
Router# show inventory raw 
NMS-RACK9-UBR10K-1#sh inventory raw
NAME: "", DESCR: "uBR10000 chassis, Hw Serial#: SPE08450FQA, Hw Revision: 1.1"
PID: uBR10000 , VID: 1.1, SN: SPE08450FQA
NAME: "slot 0/0/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "Routing Processor"
PID: Routing Processor , VID: 1.0, SN: CAT09030GVK
NAME: "PRE_A:FastEthernet0/0/0", DESCR: "Network Management Ethernet"
PID: Network Management Ethernet, VID: , SN: 
NAME: "", DESCR: "Temperature Sensor"
PID: Temperature Sensor, VID: , SN: 
NAME: "", DESCR: "Forwarding Processor"
PID: Forwarding Processor, VID: 1.0, SN: CAT09030GBL
NAME: "slot 0/1/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 1/0/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 1/1/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 2/0/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "1gigethernet-1"
PID: 1gigethernet-1 , VID: 1.0, SN: CAB0542KX74
NAME: "GigabitEthernet2/0/0", DESCR: "Gigabit Ethernet MAC Controller"
PID: Gigabit Ethernet MAC Controller, VID: Unknown Rev, SN: 
NAME: "slot 2/1/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 3/0/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "1oc12pos-1"
PID: 1oc12pos-1 , VID: 2.0, SN: CAB0437ECQU
NAME: "POS3/0/0", DESCR: "Skystone 4302 Sonet Framer"
PID: Skystone 4302 Sonet Framer, VID: 0xFFFF, SN: 
NAME: "slot 3/1/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 4/0/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 4/1/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 5/0/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 5/1/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "MC520S_D_connector"
PID: MC520S_D_connector, VID: 1.1, SN: CAT08510MM0
NAME: "Cable5/1-MAC0", DESCR: "UBR10000 CLC"
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-MAC1", DESCR: "UBR10000 CLC"
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-MAC2", DESCR: "UBR10000 CLC"
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-MAC3", DESCR: "UBR10000 CLC"
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-MAC4", DESCR: "UBR10000 CLC"
PID: UBR10000 CLC , VID: 0x0 , SN: 
NAME: "Cable5/1-US0", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US1", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US2", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US3", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US4", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US5", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US6", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US7", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US8", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US9", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US10", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US11", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US12", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US13", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US14", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US15", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US16", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US17", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US18", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-US19", DESCR: "LBT4522 PHY"
PID: LBT4522 PHY , VID: 4522, SN: 
NAME: "Cable5/1-DS0", DESCR: "BCM3033 PHY"
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "Cable5/1-DS1", DESCR: "BCM3033 PHY"
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "Cable5/1-DS2", DESCR: "BCM3033 PHY"
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "Cable5/1-DS3", DESCR: "BCM3033 PHY"
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "Cable5/1-DS4", DESCR: "BCM3033 PHY"
PID: BCM3033 PHY , VID: 3033, SN: 
NAME: "slot 6/0/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 6/1/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 7/0/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 7/1/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 8/0/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "slot 8/1/0", DESCR: "Chassis Slot"
PID: Chassis Slot , VID: , SN: 
NAME: "", DESCR: "Container for Power Supply"
PID: Container for Power Supply, VID: , SN: 
NAME: "", DESCR: "Power Supply"
PID: Power Supply , VID: , SN: 
NAME: "", DESCR: "Power Supply"
PID: Power Supply , VID: , SN: 
NAME: "", DESCR: "Container for Fan Tray"
PID: Container for Fan Tray, VID: , SN: 
NAME: "", DESCR: "Fan Tray"
PID: Fan Tray , VID: , SN: 
NAME: "", DESCR: "Fan"
PID: Fan , VID: , SN: 
NAME: "", DESCR: "Fan"
PID: Fan , VID: , SN: 
NAME: "", DESCR: "Backplane"
PID: Backplane , VID: 1.1, SN: SPE08450FQA
NAME: "fan 1", DESCR: "Fan"
PID: , VID: , SN: 
NAME: "fan 2", DESCR: "Fan"
PID: , VID: , SN: 
NAME: "Backplane", DESCR: "Backplane"
PID: , VID: , SN: SPE08450FQA
Troubleshooting Tips

If any of the Cisco products do not have an assigned PID, the output may display incorrect PIDs and the VID and SN elements may be missing, as in the following example.
NAME: "POS3/0/0", DESCR: "Skystone 4302 Sonet Framer" 
PID: FastEthernet, VID: , SN: 
NAME: "Serial1/0", DESCR: "M4T"
PID: M4T               , VID:    , SN:
In the sample output, the PID is exactly the same as the product description. The UDI is designed for use with new Cisco products that have a PID assigned. UDI information on older Cisco products is not always reliable.

Configuration Examples for Unique Device Identifier Retrieval

There are no configuration examples for the UDI Retrieval feature. For sample display output from the show inventory command, see the "Retrieving the Unique Device Identifier" section.

Additional References

This section provides references related to the UDI Retrieval feature.

Related Documents

Related Topic

Document Title

Information about managing configuration files

•Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.3(13)BC

•Cisco IOS Configuration Fundamentals and Network Management Configuration Guide

Commands for showing interface statistics

•Cisco IOS Interface Command Reference

Standards

Standards

Title

No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature.

—

MIBs

MIBs

MIBs Link

CISCO-ENTITY-ASSET-MIB

To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs

RFCs

RFCs

Title

RFC 2737

Entity MIB (Version 2)

Technical Assistance

Description

Link

Technical Assistance Center (TAC) home page, containing 30,000 pages of searchable technical content, including links to products, technologies, solutions, technical tips, and tools. Registered Cisco.com users can log in from this page to access even more content.

http://www.cisco.com/cisco/web/support/index.html

Command Reference

The following commands are introduced or modified in the feature or features documented in this module. For information about these commands, see the Cisco IOS Cable Command Reference at http://www.cisco.com/en/US/docs/ios/cable/command/reference/cbl_book.html. For information about all Cisco IOS commands, go to the Command Lookup Tool at http://tools.cisco.com/Support/CLILookup or to the Cisco IOS Master Commands List.

•show inventory

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007 Cisco Systems, Inc. All rights reserved.