Table Of Contents
Readme for Cisco Broadband Access Center 3.5.1
New Features in Cisco BAC 3.5.1
Obtaining Documentation and Submitting a Service Request
Readme for Cisco Broadband Access Center 3.5.1
Revised: Feb 24, 2010, OL-20839-01
This readme provides information on new software features, installation procedure, bug fixes, and documentation for Cisco Broadband Access Center (Cisco BAC), Release 3.5.1Contents
This document includes the following sections:
•New Features in Cisco BAC 3.5.1
•Abbreviations and Definitions
•Obtaining Documentation and Submitting a Service Request
Introduction
Cisco Broadband Access Center, referred to as Cisco BAC through out this document, automates the tasks of provisioning and managing customer premises equipment (CPE) in a broadband service provider network. The product provides a simple and easy way to deploy high-speed data, voice technology, and home networking devices.
With the high-performance capabilities of Cisco BAC, you can scale the product to suit networks of virtually any size, even those with millions of CPE. It also offers high availability, made possible by the product's distributed architecture and centralized management.
Cisco BAC supports provisioning and managing of CPE by using the Broadband Forum's CPE WAN Management Protocol (CWMP), a standard defined in the TR-069 specification. Cisco BAC integrates the capabilities defined in TR-069 to increase operator efficiency and reduce network-management problems.
Cisco BAC supports devices based on the TR-069, TR-098, TR-104, and TR-106 standards. These devices include Ethernet and ADSL gateway devices, wireless gateways, VoIP ATAs, and other devices compliant with CWMP.
This release provides:
•Bug fixes for various issues that had previously affected Cisco BAC 3.5 performance. See Resolved Problems, for the Cisco BAC 3.5 bugs that are resolved in this release.
•Other bug fixes related to DPE extensions.
For the Cisco BAC Architecture and system components, refer to Cisco Broadband Access Center Administrator's Guide, Release 3.5.
New Features in Cisco BAC 3.5.1
This section describes the changes made in the Cisco BAC 3.5.1.
•Upgrading Capability
This Cisco BAC 3.5.1 release supports upgrading from the Cisco BAC 3.5 version. For more information on upgrading Cisco BAC 3.5 to Cisco BAC 3.5.1, see Upgrading from Cisco BAC 3.5.
•DPE Extensions Backward Compatibility Support
Cisco BAC 3.5.1 DPE extensions are compatible with device firmware (RMM 5.4 or later version) and legacy firmware (RMM 5.3 or earlier version).
System Requirements
For information on installation and operating system requirements, see the Installation Guide for Cisco Broadband Access Center, Release 3.5.
System Hardening
This Cisco BAC release has undergone comprehensive security testing. The objective of this security testing was to identify and eliminate any security vulnerabilities pertaining to Cisco BAC and its supporting software and hardware. This release was also tested for protocol robustness to define application stamina when exposed to Denial of Service attacks and protocol irregularities.
For information on the System Hardening, see Cisco Broadband Access Center Hardening Guidelines, Release 3.5.
Package Details
Cisco BAC software (BAC_3.5.1_SolarisK9) contains the files that are described in Table 1.
Downloading the Package
To download the Cisco BAC software (BAC_3.5.1_SolarisK9) package:
Step 1 Go to http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=268439477.
Step 2 Log in with your Cisco.com username and password.
Note You must be a registered Cisco.com user to download from this package.
Step 3 Choose Video, Cable and Content Delivery Management > Cisco Broadband Access Center > Cisco Broadband Access Center Telco Wireless 3.5.1. The Select a Software Type page appears.
Step 4 Click the Broadband Access Center for Telco Wireless Software link. The Select a Release page appears.
Step 5 Choose Latest Releases > 3.5.1. The Release 3.5.1 Software page appears.
Step 6 Click the Download Now button next to BAC_3.5.1_Solaris.gtar.gz. The Download Cart page appears with the details of the software.
Step 7 Click the Proceed With Download button.
Step 8 Review Cisco's End User Software License Agreement and Software Download Rules, and click Accept.
Step 9 Choose one of the following download options:
•Download Manager Option
•Non Java Download Option
Step 10 Follow the prompts to download the package.
Installing Cisco BAC 3.5.1
For installation steps, see the Installation Guide for Cisco Broadband Access Center 3.5.
Upgrading from Cisco BAC 3.5
You must apply the Cisco BAC 3.5.1 patch on your existing Cisco BAC 3.5 RDU and Cisco BAC 3.5 DPE. The Cisco BAC 3.5.1 installation instructions in this section are based on the assumption that you have Cisco BAC release 3.5 already installed.
Upgrading the RDU
To apply this patch on your Cisco BAC 3.5 RDU server:
Step 1 Untar the file, BAC3_5_1_upgrade.tar.
Step 2 Go to the /upgrade351 directory.
Step 3 Run the ./createpackage.sh script.
Step 4 Go to the /bin directory.
Step 5 Run the ./351-upgrade-rdu.sh script.
The Cisco BAC watchdog is stopped by the script.
The following message appears confirming the upgrade for Cisco BAC 3.5.1:
RDU Upgrade for BAC 3.5.1 Completed SuccessfullyStep 6 Start the Cisco BAC watchdog agent. To do this, run the following command:
/etc/init.d/bprAgent start
Step 7 Run AddProperties.kiwi through Cisco BAC Tools.
Upgrading the DPE
To apply this patch on your Cisco BAC DPE server:
Step 1 Untar the file, BAC3_5_1_upgrade.tar.
Step 2 Go to the /upgrade351 directory.
Step 3 Run the ./createpackage.sh script.
Step 4 Go to the /bin directory.
Step 5 Run the ./351-upgrade-dpe.sh script.
The Cisco BAC watchdog is stopped by the script.
The following message appears confirming the upgrade for Cisco BAC 3.5.1:
DPE Upgrade for BAC 3.5.1 Completed SuccessfullyStep 6 Start the Cisco BAC watchdog agent. To do this, run the following command:
/etc/init.d/bprAgent start
Caveats
Table 2 describes software issues that are resolved and Table 3 describes significant software issues that are known to exist in this release of Cisco BAC.
For information on the complete list of Cisco BAC bugs, see the BAC351_BugList.html file in the documentation/ subdirectory of the Cisco BAC CD-ROM or electronic distribution.
Note To obtain more information about known problems, access the Cisco Software Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/home.pl. (You will be prompted to log into cisco.com).
Resolved Problems
Known Problems
Table 3 identifies known bugs in this Cisco BAC 3.5.1 release, with possible workarounds.
Abbreviations and Definitions
Related Documentation
This release of the Cisco BAC product is supported by the following documents:
•Installation Guide for Cisco Broadband Access Center, Release 3.5.
•Cisco Broadband Access Center Administrator's Guide, Release 3.5.
•Integration Developer's Guide for Cisco Broadband Access Center, Release 3.5.
•Cisco Broadband Access Center DPE CLI Reference, Release 3.5.
•Cisco Broadband Access Center 3.5 Third Party and Open Source Copyrights.
•Readme for Cisco Broadband Access Center, Release 3.5.1 (This guide).
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
CCDE, CCENT, CCSI, Cisco Eos, Cisco Explorer, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco TrustSec, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, iLYNX, IOS, iPhone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1002R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2010 Cisco Systems, Inc. All rights reserved.