Table Of Contents

MIBs Used and SNMP Traps Generated

MIBs Used and SNMP Traps Generated

---

MIBS Used

Service Monitor uses the CISCO-SYSLOG-MIB to generate SNMP traps.

SNMP Traps Generated

Cisco Unified Service Monitor (Service Monitor) generates the following traps:

•MOS violation

•Cisco 1040 unreachable

Trap details are provided as name-value pairs in clogHistMsgText field of the clogMessageGenerated notification. Table A-1 lists details of the MOS violation SNMP trap.

Table A-1 MOS Violation Trap Details 

TAG	Description	Value
TT	Trap type	1
01	Cisco 1040 ID	<letter><3-digit numeric value less than 1000>
02	Timestamp	<YYYYMMDDhhmm>
03	Threshold value	2-digit number with an implied decimal point between the first and second digits
A	Flag indicating actual or sampled data	0: Actual 1: Sampled
B	Source device IP address	IPv4 address, for example: F0.F0.F0.58
C	Recipient device IP address	IPv4 address, for example: F0.F0.F0.58
D	Codec of call data record	2: G711Alaw 64k 6: G722 64k 9: G7231 10: G728 11: G729
E	Calculated MOS score	2-digit number with an implied decimal point between the first and second digit
F	Primary cause of call degradation	J: Jitter P: Packet Loss
G	Actual packet loss in the previous minute	<numeric value>
H	Actual jitter in msec in the previous minute	<numeric value>

Table A-2 lists details of the Cisco 1040 unreachable SNMP trap.

Table A-2 Cisco 1040 Unreachable Trap Details

TAG	Description	Value
TT	Trap type	2
01	Cisco 1040 ID	<letter><3-digit numeric value less than 1000>
02	Timestamp	<YYYYMMDDhhmm>