- Introduction
- System Requirements
- Limitations and Restrictions
-
- Release 3.17S Features and Important Notes
- Release 3.16S Features and Important Notes
- Release 3.15S Features and Important Notes
- Release 3.14S Features and Important Notes
- Release 3.13S Features and Important Notes
- Release 3.12S Features and Important Notes
- Release 3.11S Features and Important Notes
- Release 3.10S Features and Important Notes
- Release 3.9S Features and Important Notes
- Release 3.8S Features and Important Notes
- Release 3.7S Features and Important Notes
- Release 3.6S Features and Important Notes
- MIBs
- Related Documentation
- New and Changed Information
- New Hardware Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.2S
- New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.2S
- New Hardware Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.1S
- New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.1S
- New Hardware Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.0S
- New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.0S
- ACL syslog Correlation
- Add Policy and Engineering Capabilities to PETR Usage
- ALG: H.323 v6 Support
- Audio and Video SPA Supports High-Definition (HD) Video
- IPsec Feature License for Monitoring and Reporting
- BFD - BFD Hardware Offload Support
- BFD C Bit Support - RFC5882
- BFD Support for EIGRP IPv6
- BFD: BGP Multihop Client Support and C Bit (IPv4/IPv6)
- BGP - iBGP NSR
- BGP - mVPN BGP sAFI 129 - IPv4
- BGP NSR - Autosense
- BGP: Graceful Shutdown (GSHUT)
- Carrier Grade Network Address Translation
- CEM Support for SPA-2CHT3-CE-ATM
- Cisco Unified Border Element (SP Edition): Common IP Address Media Bypass
- Cisco Unified Border Element (SP Edition): Via Header Passthrough
- Class Default Shaper on Physical Interface in Combination with Service Policy Applied to dMVPN Tunnel
- CSL CallHome for the Cisco ASR 1001 Router
- EIGRP IPv6 NSF/GR
- EIGRP Route Tag Enhancements
- Enhanced Route Tags
- Ethernet Operations, Administration, and Maintenance (OAM)
- GEC VPWS Support
- Group Encrypted Transport VPN Key Server
- IOS ACL Support for Filtering IP Options
- IP SLAs TWAMP Responder v1.0
- IP Tunnel - SSO c7600
- IPv6 ACL Extensions for Hop by Hop Filtering
- IPv6 VRF-Aware PBR Next-Hop Enhancement
- ISG Downstream Enhancements—Passthrough and Idle-Timer
- IS-IS IPv6 Administrative Tag
- IS-IS IPv6 Advertise Passive Only
- L2VPN Interworking: Frame Relay to ATM (Bridged Mode)
- LISP Virtualization Support for Multiple Parallel RLOC Domains
- MediaTrace 2.0
- MPLS TE - TE Display Debug Info for PCALC Error Show Command
- MPLS Traffic Engineering - AutoTunnel Mesh Groups
- MPLS Traffic Engineering - FRR Scalability Enhancements
- MPLS Traffic Engineering (TE) - Class-Based Tunnel Selection
- NBAR Classification Enhancements
- OSPFv3 VRF-Lite/PE-CE
- Per Tunnel QoS
- Perf-mon V3
- Performance Monitoring - IPv6 Support
- Proxy Mobile IPv6 Local Mobility Anchor
- Route Server Based Provisioning for PITR
- Routed Pseudowire and Routed VPLS
- SSO Support for MPLS-TE Autotunnel-Automesh Feature
- Support Multiple xTRs with Dynamic RLOCs at a Site
- USB eToken 64 KB Smartcard Support
- Zone-Based Policy Firewall IPv6 Support
New Features in and Important Notes About Cisco ASR 1000 Series Aggregation Services Routers Release 3.6S
This chapter provides information about the new features introduced in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6S. In addition, important notes about this release are also included.
Note For information about the features in and important notes about releases prior to Release 3.6.0, see Cisco IOS XE 3S Release Notes.
New and Changed Information
The following sections list the new hardware and software features that are supported by the Cisco ASR 1000 Series Routers for Cisco IOS XE Release 3.6S:
- New Hardware Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.2S
- New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.2S
- New Hardware Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.1S
- New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.1S
- New Hardware Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.0S
- New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.0S
New Hardware Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.2S
There are no new hardware features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.2S.
New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.2S
There are no new software features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.2S.
New Hardware Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.1S
There are no new hardware features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.1S.
New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.1S
There are no new software features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.1S.
New Hardware Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.0S
There are no new hardware features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6S.
New Software Features in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.0S
The following are the new software features introduced in Cisco ASR 1000 Series Aggregation Services Routers Release 3.6S:
ACL syslog Correlation
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_data_acl/configuration/xe-3s/sec-acl-syslog.html
Add Policy and Engineering Capabilities to PETR Usage
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_lisp/command/ip-lisp-cr-book.html
ALG: H.323 v6 Support
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/ipaddr_nat/configuration/xe-3s/iadnat-applvlgw.html
Audio and Video SPA Supports High-Definition (HD) Video
Effective from Cisco IOS XE Release 3.6S, the WebEx Node SPA supports the WebEx WBS27SP32 version. This WebEx version supports both High Quality (HQ) and High-Definition (HD) Video on the Audio and Video SPA.
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/ASR1000/ASRovwma.html#wpaudio_and_video_SPA
IPsec Feature License for Monitoring and Reporting
From Cisco IOS XE Release 3.6S onward, you can test IPsec features by activating the built-in evaluation license and accepting the End User License Agreement (EULA). You must activate this license and accept the EULA to ensure that the crypto commands associated with an interface are not blocked. For more information about this feature, see the Software Activation Configuration Guide, Cisco IOS XE Release 3S at the following location:
http://www.cisco.com/en/US/docs/ios-xml/ios/csa/configuration/xe-3s/csa-xe-3s-book.html
BFD - BFD Hardware Offload Support
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html#wpxref23529
BFD C Bit Support - RFC5882
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_bfd/configuration/xe-3s/irb-xe-3s-book.html
BFD Support for EIGRP IPv6
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_eigrp/configuration/xe-3s/ire-bfd-ipv6.html
BFD: BGP Multihop Client Support and C Bit (IPv4/IPv6)
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_bgp/configuration/xe-3s/irg-multihop-cbit.html
BGP - iBGP NSR
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_bgp/configuration/xe-3s/irg-nsr-ibgp.html
BGP - mVPN BGP sAFI 129 - IPv4
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_bgp/configuration/xe-3s/irg-mvpn-safi.html
BGP NSR - Autosense
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_bgp/configuration/xe-3s/irg-nsr-autosense.html
BGP: Graceful Shutdown (GSHUT)
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_bgp/configuration/xe-3s/irg-grace-shut.html
Carrier Grade Network Address Translation
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/ipaddr_nat/configuration/xe-3s/iadnat-cgn.html
CEM Support for SPA-2CHT3-CE-ATM
For detailed information, see the following Cisco documents:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/ASR1000/ASRspasw.html
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR1000/asr_sip_spa_hw.html
Cisco Unified Border Element (SP Edition): Common IP Address Media Bypass
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/sbcu/sbc_pol.html
Cisco Unified Border Element (SP Edition): Via Header Passthrough
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/sbcu/sbc_scf.html
Class Default Shaper on Physical Interface in Combination with Service Policy Applied to dMVPN Tunnel
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-3s/sec-conn-dmvpn-xe-3s-book.html
CSL CallHome for the Cisco ASR 1001 Router
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/csa_callhome.html
EIGRP IPv6 NSF/GR
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_eigrp/configuration/xe-3s/eigrp-ip6-nsf.html
EIGRP Route Tag Enhancements
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/partner/docs/ios-xml/ios/iproute_eigrp/configuration/xe-3s/ire-en-rou-tags.html
Enhanced Route Tags
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_eigrp/configuration/xe-3s/ire-en-rou-tags.html
Ethernet Operations, Administration, and Maintenance (OAM)
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/cether/configuration/xe-3s/ce-oam.html
GEC VPWS Support
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/mpls.html
Group Encrypted Transport VPN Key Server
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_getvpn/configuration/xe-3s/sec-get-vpn.html
IOS ACL Support for Filtering IP Options
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_data_acl/configuration/xe-3s/sec-create-ip-al-filter.html
IP SLAs TWAMP Responder v1.0
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/ipsla/configuration/xe-3s/sla_twamp.html
IP Tunnel - SSO c7600
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/interface/configuration/xe-3s/ir-impl-tun-xe.html
IPv6 ACL Extensions for Hop by Hop Filtering
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/ipv6/configuration/xe-3s/ip6-acl-ext-hbh-xe.html
IPv6 VRF-Aware PBR Next-Hop Enhancement
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/mp_l3_vpns/configuration/xe-3s/mp-mltvrf-slct-pbr.html
ISG Downstream Enhancements—Passthrough and Idle-Timer
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/isg/configuration/xe-3s/isg-acess-ip-sess.html
IS-IS IPv6 Administrative Tag
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_isis/configuration/xe-3s/ip6-route-isis-adm-tag.html
IS-IS IPv6 Advertise Passive Only
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_isis/configuration/xe-3s/ip6-route-isis-adv-pass-onl.html
L2VPN Interworking: Frame Relay to ATM (Bridged Mode)
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/mpls.html
LISP Virtualization Support for Multiple Parallel RLOC Domains
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book.html
MediaTrace 2.0
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/media_monitoring/configuration/xe-3s/mm-mediatrace.html
MPLS TE - TE Display Debug Info for PCALC Error Show Command
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/products/ps11174/prod_release_notes_list.html
MPLS Traffic Engineering - AutoTunnel Mesh Groups
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/mp_te_path_setup/configuration/xe-3s/mp-te-autotun-mesh.html
MPLS Traffic Engineering - FRR Scalability Enhancements
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/mp_te_path_protect/configuration/xe-3s/mp-te-frr-node-prot.html
MPLS Traffic Engineering (TE) - Class-Based Tunnel Selection
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/mp_te_path_setup/configuration/xe-3s/mp-te-tun-select-xe.html
NBAR Classification Enhancements
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/qos_nbar/prot_lib/configuration/xe-3s/proto_lib1.html
OSPFv3 VRF-Lite/PE-CE
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_ospf/configuration/xe-3s/iro-vrf-lite-pe-ce.html
Per Tunnel QoS
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-3s/sec-conn-dmvpn-xe-3s-book.html
Perf-mon V3
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/media_monitoring/configuration/xe-3s/mm-pasv-mon.html
Performance Monitoring - IPv6 Support
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/media_monitoring/configuration/xe-3s/mm-pasv-mon.html
Proxy Mobile IPv6 Local Mobility Anchor
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/partner/docs/ios-xml/ios/mob_pmipv6/configuration/xe-3s/imo-pmipv6-lma-support.html
Route Server Based Provisioning for PITR
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_lisp/command/ip-lisp-cr-book.html
Routed Pseudowire and Routed VPLS
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/mp_l2_vpns/configuration/xe-3s/mp-rt-pw-rt-vpls.html
SSO Support for MPLS-TE Autotunnel-Automesh Feature
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/mp_ha/configuration/xe-3s/mp-sso-supp-mpls-te-autotun-automesh.html
Support Multiple xTRs with Dynamic RLOCs at a Site
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s-book.html
USB eToken 64 KB Smartcard Support
For detailed information, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_pki/configuration/xe-3s/sec-store-pki-cred.html
Zone-Based Policy Firewall IPv6 Support
The zone-based policy firewall provides advanced traffic filtering or inspection of IPv4 and IPv6 packets. In Cisco IOS XE Release 3.6S and later releases, both IPv4 and IPv6 packet inspection are enabled by default. If you need to bypass the IPv6 packet inspection, you need to configure the pass action. The pass action passes the traffic from one zone to another. When the pass action is configured, the firewall does not inspect the traffic; it passes the traffic. In the IPv6 firewall, you must explicitly configure the pass action for the return traffic by defining a zone pair and a policy map with pass action.
For detailed information about the Zone-Based Policy Firewall IPv6 Support feature, see the following Cisco document:
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_data_zbf/configuration/xe-3s/sec-zbf-ipv6.html
Important Notes
The following sections contain important notes about Cisco ASR 1000 Series Aggregation Services Routers Release 3.6S.
Deferrals
Cisco IOS software images are subject to deferral. We recommend that you view the deferral notices at the following location to determine whether your software release is affected:
http://www.cisco.com/en/US/products/products_security_advisories_listing.html
Field Notices and Bulletins
- Field Notices—We recommend that you view the field notices for Release 3.6S to determine whether your software or hardware platforms are affected. You can find the field notices at the following location:
http://www.cisco.com/en/US/support/tsd_products_field_notice_summary.html
http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_literature.html
Important Notes About Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.0S
There are no important notes specific to Cisco ASR 1000 Series Aggregation Services Routers Release 3.6.0S.