C Commands
This chapter describes the Cisco NX-OS FabricPath commands that begin with C.
clear fabricpath isis adjacency
To clear the FabricPath Layer 2 Intermediate-System to Intermediate-System (IS-IS) adjacency state, use the clear fabricpath isis adjacency command.
clear fabricpath isis adjacency [ * | ethernet module/slot | port-channel port_channel_number | system-id sid]
Syntax Description
Command Default
None
Command Modes
EXEC mode
Command History
|
|
---|---|
5.1(3)N1(1) |
This command was introduced. |
Usage Guidelines
Note If you enter the * variable, you will affect forwarding by entering this command and might interrupt traffic; this command tears down all adjacencies.
This command requires an Enhanced Layer 2 license.
Examples
This example shows how to clear the FabricPath Layer 2 adjacency state:
switch# clear fabricpath isis adjacency *
switch#
Related Commands
|
|
---|---|
fabricpath domain default |
Enables FabricPath Layer 2 IS-IS. |
clear fabricpath isis statistics
To clear all FabricPath Intermediate System-to-Intermediate System (IS-IS) protocol statistics, use the clear fabricpath isis statistics command.
clear fabricpath isis statistics *
Syntax Description
* |
Specifies the IS-IS adjacencies on all interfaces. |
Command Default
None
Command Modes
EXEC mode
Command History
|
|
---|---|
5.1(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires an Enhanced Layer 2 license.
Examples
This example shows how to clear FabricPath IS-IS protocol statistics:
switch# clear fabricpath isis statistics *
switch#
Related Commands
|
|
---|---|
fabricpath domain default |
Enables FabricPath Layer 2 IS-IS. |
clear fabricpath isis traffic
To clear Intermediate System-to-Intermediate System (IS-IS) traffic information, use the clear fabricpath isis traffic command.
clear fabricpath isis traffic [* | ethernet module/slot | port-channel port_channel_number]
Syntax Description
Command Default
None
Command Modes
EXEC mode
Command History
|
|
---|---|
5.1(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires an Enhanced Layer 2 license.
Examples
This example shows how to clear FabricPath IS-IS traffic information:
switch# clear fabricpath isis traffic *
switch#
Related Commands
|
|
---|---|
fabricpath domain default |
Enables FabricPath Layer 2 IS-IS. |