The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the Cisco NX-OS FabricPath commands that begin with D.
To configure the topology description, use the description command.
description desc
no description desc
desc |
Line description. The maximum size is 80 bytes. |
None
Global configuration mode
|
|
---|---|
5.1(3)N1(1) |
This command was introduced. |
This command requires an Enhanced Layer 2 license.
This example shows how to configure the topology description:
switch# configure terminal
switch#(config)# description FabricPath Topology 50 Configuration
switch#(config)#
|
|
---|---|
fabricpath domain default |
Enables FabricPath Layer 2 IS-IS. |