I Commands

This chapter describes the Cisco NX-OS FabricPath commands that begin with I.

install feature-set fabricpath

To install the FabricPath feature set on the switch, use the install feature-set fabricpath command. To remove the FabricPath feature set, use the no form of this command.

install feature-set fabricpath

no install feature-set fabricpath

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration mode

Command History

Release
Modification

5.1(3)N1(1)

This command was introduced.


Usage Guidelines

Note The FabricPath feature is supported only on the Cisco Nexus 5500 Series switches.

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to install the FabricPath features on the switch: 

switch# configure terminal

switch(config)# install feature-set fabricpath

switch(config)# 

 
   
 
    
   
 Related Commands
 
   
 
    
 
      
      
      
 
        
        

          Command 
        
 		 
        
        

          Description 
        
 		 
      
 
      
 
       
 feature fabric-binding 
 		 
       
 Enables or disables fabric binding on the switch. 
 		 
      
 
      
 
       
 feature-set fabricpath 
 		 
       
 Enables the FabricPath feature set on the switch. 
 		 
      
 
      
 
       
 show running-config 
 		 
       
 Displays the running system configuration information.