Cisco Nexus 5000 Series NX-OS FabricPath Command Reference

Show Commands

This chapter describes the Cisco NX-OS FabricPath show commands.

show fabricpath conflict

To display information about the conflicts in the FabricPath network, use the show fabricpath conflict command.

show fabricpath conflict {all [detail] | link [detail] | switch-id [detail] | transitions [detail]}

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display detailed information about the conflicts in the FabricPath network:

switch# show fabricpath conflict all detail

No Ports under Fabricpath control

No Switch id Conflicts

No transitions in progress

switch#

Related Commands

show fabricpath ftag

To display information about the FabricPath FTAG, use the show fabricpath ftag command.

show fabricpath ftag

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the information about the FabricPath FTAG:

switch# show fabricpath ftag

No ftag values present

switch#

Related Commands

show fabricpath isis

To display the FabricPath Intermediate System-to-Intermediate System (IS-IS) adjacency database, use the show fabricpath isis command.

show fabricpath isis

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display detailed information about the IS-IS adjacency:

switch# show fabricpath isis

Fabricpath IS-IS domain : default

  System ID : 0005.73a3.ba3c  IS-Type : L1

  SAP : 432  Queue Handle : 11

  Maximum LSP MTU: 1492

  Graceful Restart enabled. State: Inactive

  Last graceful restart status : none

  Metric-style : advertise(wide), accept(wide)

  Start-Mode: Complete [Start-type configuration]

  Area address(es) :

    00

  Process is up and running

  CIB ID: 4

  Interfaces supported by Fabricpath IS-IS :

  Level 1

  Authentication type and keychain not configured

  Authentication check specified

  MT-0 Ref-Bw: 400000

  Address family Swid unicast :

    Number of interface : 0

    Distance : 115

  L1 Next SPF: Inactive

switch# 

Related Commands

show fabricpath isis adjacency

To display the FabricPath Intermediate System-to-Intermediate System (IS-IS) adjacency database, use the show fabricpath isis adjacency command.

show fabricpath isis adjacency [interface {ethernet module/slot | port-channel channel-number} | detail | summary | system-id sid]

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display detailed information about the IS-IS adjacency:

switch# show fabricpath isis adjacency detail

switch# 

Related Commands

show fabricpath isis database

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) link-state packet (LSP) database, use the show fabricpath isis database command.

show fabricpath isis database [l1] [level-1] [mgroup] [detail | summary] [sid] {[zero-sequence] | [router-id] | [adjacency]}

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS LSP database:

switch# show fabricpath isis database

Fabricpath IS-IS domain: default LSP database

  LSPID                 Seq Number   Checksum  Lifetime   A/P/O/T

  O2-48_Mgmt-2.00-00  * 0x00000008   0x2F9D    1073       0/0/0/1

switch#

This example shows how to display the IS-IS Level-1 routing link state database:

switch# show fabricpath isis database level-1

Fabricpath IS-IS domain: default LSP database

  LSPID                 Seq Number   Checksum  Lifetime   A/P/O/T

  O2-48_Mgmt-2.00-00  * 0x00000008   0x2F9D    1041       0/0/0/1

switch#

Related Commands

show fabricpath isis ftag

To display Intermediate System-to-Intermediate System (IS-IS) FTAG values associated with the trees in the topology, use the show fabricpath isis ftag command.

show fabricpath isis ftag [multidestination tree-id]

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display IS-IS FTAG multidestination information:

switch# show fabricpath isis ftag multidestination 1

Fabricpath IS-IS domain: default

Fabricpath IS-IS Ftag Database

  Legend: C - Confirmed, T - tentative

MT-0

                          PrimaryTree

    Multidestination-2     0 [C]

switch#

Related Commands

show fabricpath isis hostname

To display FabricPath Intermediate System-to-Intermediate System (IS-IS) hostname table information, use the show fabricpath isis hostname command.

show fabricpath isis hostname [detail]

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS hostname table:

Switch# show fabricpath isis hostname detail

Fabricpath IS-IS domain: default dynamic hostname table

  Level  LSP ID                Dynamic hostname

  1      0005.73a3.ba3c.00-00* O2-48_Mgmt-2

switch#

Related Commands

show fabricpath isis interface

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) interface, use the show fabricpath isis interface command.

show fabricpath isis interface {brief | ethernet slot/port | port-channel channel-number}

Syntax Descriptionshow fabricpath isis interface {brief | ethernet slot/chassis number | port-channel channel-number}

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the brief information about the FabricPath IS-IS interface:

switch1# show fabricpath isis interface brief

This example shows how to display the FabricPath IS-IS interface information for an Ethernet interface:

switch1# show fabricpath isis interface ethernet 1/2

Related Commands

show fabricpath isis ip mroute

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) multicast route, use the show fabricpath isis ip mroute command.

show fabricpath isis ip mroute [vlan vlan-id [group group-id [source source-id]]]

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the IS-IS mroute:

switch# show fabricpath isis ip mroute

Related Commands

show fabricpath isis ip redistribute mroute

To display the FabricPath Intermediate System-to-Intermediate System (IS-IS) redistribute multicast route information, use the show fabricpath isis ip redistribute mroute command.

show fabricpath isis ip redistribute mroute [vlan vlan-id [group group-id [source source-id]]]

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the FabricPath IS-IS redistribute mroute information:

switch# show fabricpath isis ip redistribute mroute

Related Commands

show fabricpath isis protocol

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) protocol, use the show fabricpath isis protocol command.

show fabricpath isis protocol

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS protocol:

switch1# show fabricpath isis protocol

Fabricpath IS-IS domain : default

  System ID : 0005.73a3.ba3c  IS-Type : L1

  SAP : 432  Queue Handle : 11

  Maximum LSP MTU: 1492

  Graceful Restart enabled. State: Inactive

  Last graceful restart status : none

  Metric-style : advertise(wide), accept(wide)

  Start-Mode: Complete [Start-type configuration]

  Area address(es) :

    00

  Process is up and running

  CIB ID: 4

  Interfaces supported by Fabricpath IS-IS :

  Level 1

  Authentication type and keychain not configured

  Authentication check specified

  MT-0 Ref-Bw: 400000

  Address family Swid unicast :

    Number of interface : 0

    Distance : 115

  L1 Next SPF: Inactive

switch#

Related Commands

show fabricpath isis route

To display the FabricPath Intermediate System-to-Intermediate System (IS-IS) routing table for unicast routes, use the show fabricpath isis route command.

show fabricpath isis route [summary | detail]

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display detailed information about the IS-IS route:

switch# show fabricpath isis route detail

Fabricpath IS-IS domain: default MT-0

Topology 0, Tree 0, Swid routing table

switch#

Related Commands

show fabricpath isis rrm

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) Retransmit-Routing-Message (RRM), use the show fabricpath isis rrm command.

show fabricpath isis rrm [gm] {ethernet slot/port | port-channel channel-number}

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the FabricPath IS-IS RRM information:

switch# show fabricpath isis rrm gm ethernet 2/2

Related Commands

show fabricpath isis spf-log

To display information about FabricPath Intermediate System-to-Intermediate System (IS-IS) shortest-path-first (SPF) calculation statistics, use the show fabricpath isis spf-log command.

show fabricpath isis spf-log [detail]

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the detailed information about the FabricPath IS-IS SPF:

switch1# show fabricpath isis spf-log detail

Fabricpath IS-IS domain: default SPF information

Total number of SPF calculations: 1

Log entry (current/max): 1/20

Log entry: 01, Ago: 02:32:37, Date: Tue Oct 25 03:41:00 2011

  Level  Instance    Init      SPF       IS Update  URIB Update  Total

  1      0x00000001  0.000062  0.000009  0.000009   0.000009     0.000411

  Level  Node Count   Changed  Reason

  1         1     2         0  Switch-id updated

switch#

Related Commands

show fabricpath isis srm

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) Send-Routing-Message (SRM), use the show fabricpath isis srm command.

show fabricpath isis srm [gm] {ethernet slot/port | port-channel channel-number}

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS SRM:

switch# show fabricpath isis srm gm ethernet 2/2

Related Commands

show fabricpath isis ssn

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) Send-Sequence-Number (SSN), use the show fabricpath isis ssn command.

show fabricpath isis ssn [gm] {ethernet slot/port | port-channel channel-number}

Syntax Description

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display FabricPath IS-IS Send-Sequence-Number information:

switch# show fabricpath isis ssn gm port-channel 400

Related Commands

show fabricpath isis statistics

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) protocol statistics, use the show fabricpath isis statistics command.

show fabricpath isis statistics

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS protocol statistics:

switch# show fabricpath isis statistics

Fabricpath IS-IS domain:      default

SPF calculations:   1

LSPs sourced:       2

LSPs refreshed:     18

LSPs purged:        0

Buffers U2RIB:      0

Buffers M2RIB:      0

Buffers PIXM:       0

Swid Updates:       2

Ftag Updates:       0

switch#

Related Commands

show fabricpath isis switch-id

To display switch IDs and reachability information in the topology, use the show fabricpath isis switch-id command.

show fabricpath isis switch-id

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the switch ID database:

switch# show fabricpath isis switch-id

Fabricpath IS-IS domain: default

Fabricpath IS-IS Switch-ID Database

Legend: C - Confirmed, T - tentative, W - swap

        S - sticky, E - Emulated Switch

        '*' - this system

System-ID        Primary  Secondary  Reachable  Bcast-Priority

MT-0

0005.73a3.ba3c*  2590[C]       0[C]  Yes                64

switch#

Related Commands

show fabricpath isis topology summary

To display information about the Intermediate System-to-Intermediate System (IS-IS) summary topology, use the show fabricpath isis topology summary command.

show fabricpath isis topology summary

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Global configuration mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS summary topology:

switch# show fabricpath isis topology summary

Fabricpath IS-IS domain: default FabricPath IS-IS Topology Summary

MT-0

  Configured interfaces:

  Number of trees: 2

    Tree id: 1, ftag: 0, root system: 0000.0000.0000, 0

    Tree id: 2, ftag: 0, root system: 0000.0000.0000, 0

switch#

Related Commands

show fabricpath isis traffic

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) traffic, use the show fabricpath isis traffic command.

show fabricpath isis traffic {ethernet slot/port | port-channel channel-number}

Syntax Description

Command Default

None

Command Modes

Global configuraion mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS traffic:

switch1# show fabricpath isis traffic

Fabricpath IS-IS domain: default

Fabricpath IS-IS Traffic:

PDU        Received        Sent  RcvAuthErr OtherRcvErr  ReTransmit

P2P-IIH           0           0           0           0         n/a

CSNP              0           0           0           0         n/a

PSNP              0           0           0           0         n/a

LSP               0           0           0           0           0

switch#

Related Commands

show fabricpath isis trees

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) trees, use the show fabricpath isis trees command.

show fabricpath isis trees [multidestination tree-id]

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath IS-IS tree multidestination:

switch# show fabricpath isis trees multidestination 1

Fabricpath IS-IS domain: default

Note: The metric mentioned for multidestination tree is from the root of that tr

ee to that switch-id

MT-0

Topology 0, Tree 1, Swid routing table

switch# 

Related Commands

show fabricpath isis vlan-range

To display VLANs in the FabricPath Intermediate System-to-Intermediate System (IS-IS) topology, use the show fabricpath isis vlan-range command.

show fabricpath isis vlan-range

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display VLANs in the FabricPath IS-IS topology:

switch# show fabricpath isis vlan-range

Fabricpath IS-IS domain: default

MT-0

switch#

Related Commands

show fabricpath load-balance

To display FabricPath load-balancing information, use the show fabricpath load-balance command.

show fabricpath load-balance

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

Note The show fabricpath load-balance cannot be executed by any users without admin privileges.

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display FabricPath load-balancing information:

switch# show fabricpath load-balance

ECMP load-balancing configuration:

L3/L4 Preference: Mixed

Hash Control: Symmetric

Rotate amount: 7 bytes

Use VLAN: TRUE

switch#

Related Commands

show fabricpath load-balance multicast

To display FabricPath load-balancing information for the multicast load-balancing scheme, use the show fabricpath load-balance multicast command.

show fabricpath load-balance multicast ftag-selected vlan vlan-ID macg MAC-addr

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display FabricPath load-balancing forwarding information for the multicast load-balancing scheme:

switch# show fabricpath load-balance multicast ftag-selected vlan 10 macg 0100.5E10.1010

Related Commands

show fabricpath load-balance unicast

To display FabricPath load-balancing information for the unicast load-balancing scheme, use the show fabricpath load-balance unicast command.

show fabricpath load-balance unicast forwarding-path ftag ftag-ID switchid switch-ID src-mac MAC-addr dst-mac MAC-addr [dst-ip ip-addr] [dst-ipv6 ipv6-addr] [l4-dst-port l4-dest-port] [l4-src-port l4-src-port] [src-ip ip-addr] [src-ipv6 ipv6-addr] [vlan vlan-ID]

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display FabricPath load-balancing forwarding information for the unicast load-balancing scheme:

switch# show fabricpath load-balance unicast forwarding-path ftag 1 switchid 200 src-mac 
00:10:20:30:40:50 dst-mac 00:30:40:50:60:70 vlan 200

This example shows how to display FabricPath load-balance hashing information for the unicast load-balancing scheme:

switch# show fabricpath load-balance unicast forwarding-path ftag 1 switchid 232 src-mac 
0000.1234.5678 dst-mac 0000.3452.4567 src-ipv6 12:34::56:78 dst-ipv6 01:34::56:78 
l4-dst-port 100 l4-src-port 435 vlan 200

Missing params will be substituted by 0's.

crc8_hash: 229

This flow selects interface Po400

switch#

Related Commands

show fabricpath route

To display FabricPath route information, use the show fabricpath route command.

show fabricpath route [detail [hex] | hex | topology {topology_ID [switchid switch-ID] | all} [detail | hex]]

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the detailed information about the FabricPath route:

switch# show fabricpath route detail

FabricPath Unicast Route Table

'a/b/c' denotes ftag/switch-id/subswitch-id

'[x/y]' denotes [admin distance/metric]

ftag 0 is local ftag

subswitch-id 0 is default subswitch-id

FabricPath Unicast Route Table for Topology-Default

0/2590/0, number of next-hops: 0

        via ---- , [60/0], 0 day/s 02:57:18, local

switch#

This example shows how to display the information about the FabricPath route:

switch# show fabricpath route

FabricPath Unicast Route Table

'a/b/c' denotes ftag/switch-id/subswitch-id

'[x/y]' denotes [admin distance/metric]

ftag 0 is local ftag

subswitch-id 0 is default subswitch-id

FabricPath Unicast Route Table for Topology-Default

0/2590/0, number of next-hops: 0

        via ---- , [60/0], 0 day/s 02:58:05, local

switch#

Related Commands

show fabricpath switch-id

To display the FabricPath switch ID, use the show fabricpath switch-id command.

show fabricpath switch-id [local]

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the FabricPath switch ID:

switch# show fabricpath switch-id

                        FABRICPATH SWITCH-ID TABLE

Legend: '*' - this system

=========================================================================

SWITCH-ID      SYSTEM-ID       FLAGS         STATE    STATIC  EMULATED

----------+----------------+------------+-----------+--------------------

*2590        0005.73a3.ba3c    Primary     Confirmed    No      No

Total Switch-ids: 1

O2-48_Mgmt-2(config)#

O2-48_Mgmt-2(config)# show fabricpath s?

  switch-id  Switch ID

  system-id  System-id

switch#

This example shows how to display the local FabricPath switch ID:

switch# show fabricpath switch-id local

Switch-Id: 2590

System-Id: 0005.73a3.ba3c

switch#

Related Commands

show fabricpath system-id

To display information about the FabricPath network by the system ID, use the show fabricpath system-id command.

show fabricpath system-id {mac-address}

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display information about the FabricPath network by the system ID:

switch# show fabricpath system-id 0005.73a3.ba3c

Switch-Id: 2590

State: Confirmed

switch#

Related Commands

show fabricpath timers

To display settings for the allocate-delay, linkup-delay, and transition-delay timers for the FabricPath network by the system ID, use the show fabricpath timers command.

show fabricpath timers

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display FabricPath timers:

switch# show fabricpath timers

Allocate Delay Timer       :   10

Transition Delay Timer     :   10

Link-up Delay Timer        :   10

switch#

Related Commands

show fabricpath topology

To display information about the FabricPath Intermediate System-to-Intermediate System (IS-IS) topology, use the show fabricpath topology command.

Note Cisco Nexus 5000 series only supports 2 topologies; the default or base topology (topology 0), and the local VLAN topology (topology 1).

show fabricpath topology [topology-ID {ftag [active | multicast | unicast] | interface [ethernet slot/port | port-channel channel-number] | vlan [active]} | detail | ftag [active | multicast | unicast] | interface [ethernet slot/port | port-channel channel-number | vlan [active]] | vlan [active]]

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display VLANs in a Layer 2 topology:

switch# show fabricpath topology 0 vlan

Topo-Description         TPG-ID    Configured VLAN List

------------------------ --------- ----------------------------

0                        0         1-4095

switch#

This example shows how to display interface topology information:

switch# show fabricpath topology 0 interface

This example shows how to display active multicast FTAGs:

switch# show fabricpath topology 0 ftag

This example shows how to display the FabricPath topology interface VLANs:

switch# show fabricpath topology interface ethernet 2/1 vlan

Related Commands

show feature-set

To display the status of all feature sets on the switch, use the show feature-set command.

show feature-set [services feature-set-name]

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the status of a feature set:

switch# show feature-set

Feature Set Name      ID        State

--------------------  --------  --------

fabricpath            2         enabled

virtualization        4         uninstalled

switch#

This example shows how to display the services associated with the FabricPath feature set:

switch# show feature-set services fabricpath

u2rib

drap

isis_fabricpath

3 services in feature set fabricpath

switch#

Related Commands

show mroute

To display the Layer 2 (l2) or FabricPath multicast route database, use the show mroute command.

show {l2 | fabricpath} mroute {[vdc_omf] | [vlan vlanid] {{[omf] | [flood] | [source {srcaddr | ipv6srcaddr}] [group {groupaddr | ipv6groupaddr}]} [resolved] [ftag ftag-id] [hex]}}

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

Note l2 can be used interchangeably with FabricPath.

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the VLAN flood routes in the FabricPath multicast route database:

switch# show fabricpath mroute flood

This example shows how to display the resolved switch ID of the next hop's underlying interfaces:

switch# show l2 mroute resolved

Related Commands

show multicast trees

To display the Layer 2 (l2) or FabricPath multicast tree database, use the show multicast trees command.

show {l2 | fabricpath} multicast trees [topo topo-id] [ftag ftag-id] [hex]

Syntax Description

Command Default

None

Command Modes

EXEC mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display the FabricPath multicast tree database:

switch# show fabricpath multicast trees

This example shows how to display the FTAG number of the Layer 2 multicast trees:

switch# show l2 multicast trees ftag 1

This example shows how to display the Layer 2 multicast tree database:

switch# show l2 multicast trees

Related Commands

show running-config fabricpath

To display FabricPath running system configuration information, use the show running-config fabricpath command.

show running-config fabricpath [domain default | switch-id | topology] [all]

Syntax Description

Command Default

None

Command Modes

Any command mode

Command History

Usage Guidelines

This command requires an Enhanced Layer 2 license.

Examples

This example shows how to display FabricPath running system configuration information:

switch# show running-config fabricpath

!Command: show running-config fabricpath

!Time: Tue Oct 25 07:55:05 2011

version 5.1(3)N1(1)

install feature-set fabricpath

feature-set fabricpath

vpc domain 1

fabricpath domain default

switch#

Related Commands