Show Commands
This chapter describes the Cisco NX-OS MSDP show commands.
show ip msdp count
To display information about Multicast Source Discovery Protocol (MSDP) counts, use the show ip msdp count command.
show ip msdp count [ asn ] [ vrf { vrf-name | all }]
Syntax Description
asn |
(Optional) Autonomous system (AS) number. |
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
all |
Specifies all VRFs. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display MSDP counts:
switch(
config)#
show ip msdp count
show ip msdp event-history
To display information in the Multicast Source Discovery Protocol (MSDP) event history buffers, use the show ip msdp event-history command.
show ip msdp event-history { errors | msgs | statistics }
Syntax Description
errors |
Displays events of type error. |
msgs |
Displays events of type msg. |
statistics |
Displays events of type statistics. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Examples
This example shows how to display information in the MSDP msgs event history buffer:
switch(config)#
show ip msdp event-history msgs
Related Commands
|
|
clear ip msdp event-history |
Clears the contents of the MSDP event history buffers. |
ip msdp event-history |
Configures the size of MSDP event history buffers. |
show ip msdp mesh-group
To display information about Multicast Source Discovery Protocol (MSDP) mesh groups, use the show ip msdp mesh-group command.
show ip msdp mesh-group [ mesh-group ] [ vrf { vrf-name | all }]
Syntax Description
mesh-group |
(Optional) Mesh group name. |
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
all |
Specifies all VRFs. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about MSDP mesh groups:
switch(
config)#
show ip msdp mesh-group
show ip msdp peer
To display information about Multicast Source Discovery Protocol (MSDP) peers, use the show ip msdp peer command.
show ip msdp peer [ peer-address ] [ vrf { vrf-name | all }]
Syntax Description
peer-address |
(Optional) IP address of an MSDP peer. |
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
all |
Specifies all VRFs. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about MSDP peers:
switch(
config)#
show ip msdp peer
show ip msdp policy statistics sa-policy
To display information about Multicast Source Discovery Protocol (MSDP) Source-Active (SA) policies, use the show ip msdp policy statistics sa-policy command.
show ip msdp policy statistics sa-policy peer-address { in | out } [ vrf { vrf-name }]
Syntax Description
peer-address |
IP address of the MSDP peer for the SA policy. |
in |
Specifies the input policy. |
out |
Specifies the output policy. |
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about MSDP SA policies:
switch(
config)#
show ip msdp policy statistics sa-policy 192.168.1.10 in
show ip msdp route
To display information about the Multicast Source Discovery Protocol (MSDP) Source-Active (SA) cache, use the show ip msdp route command.
show ip msdp route [{ source [ group ]} | { group [ source ]}] [ asn ] [ peer peer ] [ detail ] [ vrf { vrf-name | all }]
Syntax Description
source |
Source address for SA cache information. |
group |
(Optional) Group address for SA cache information. |
asn |
(Optional) Autonomous system (AS) number. |
peer peer |
(Optional) Specifies the IP address of a peer. |
detail |
(Optional) Displays detailed information. |
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
all |
Specifies all VRFs. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
The show ip msdp sa-cache command is an alternative form of this command.
This command requires the LAN Base Services license.
Examples
This example shows how to display information about the MSDP SA cache:
switch(
config)#
show ip msdp route
Related Commands
|
|
clear ip msdp route |
Clears routes in the MSDP Source-Active cache. |
show ip msdp sa-cache |
Displays information about the MSDP SA cache. |
show ip msdp rpf
To display information about the Multicast Source Discovery Protocol (MSDP) next-hop autonomous system (AS) on the Border Gateway Protocol (BGP) path to a rendezvous point (RP) address, use the show ip msdp rpf command.
show ip msdp rpf rp-address [ vrf { vrf-name all }]
Syntax Description
rp-address |
IP address of the RP. |
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
all |
Specifies all VRFs. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about MSDP reverse path forwarding (RPF) peers:
switch(
config)#
show ip msdp rpf 192.168.1.10
show ip msdp sa-cache
To display information about the Multicast Source Discovery Protocol (MSDP) Source-Active (SA) cache, use the show ip msdp sa-cache command.
show ip msdp sa-cache [{ source [ group ]} | { group [ source ]}] [ asn ] [ peer peer ] [ detail ] [ vrf { vrf-name | all }]
Syntax Description
source |
Source address for SA cache information. |
group |
(Optional) Group address for SA cache information. |
asn |
(Optional) Autonomous system (AS) number. |
peer peer |
(Optional) Specifies the IP address of a peer. |
detail |
(Optional) Displays detailed information. |
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
all |
Specifies all VRFs. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
The show ip msdp route command is an alternative form of this command.
This command requires the LAN Base Services license.
Examples
This example shows how to display information about the MSDP SA cache:
switch(
config)#
show ip msdp sa-cache
Related Commands
|
|
clear ip msdp sa-cache |
Clears routes in the MSDP Source-Active cache. |
show ip msdp route |
Displays information about the MSDP SA cache. |
show ip msdp route
To display information about the Multicast Source Discovery Protocol (MSDP) Source-Active (SA) route cache, use the show ip msdp route command.
show ip msdp route [{ source [ group ]} | { group [ source ]}] [ asn ] [ peer peer ] [ detail ] [ vrf { vrf-name | all }]
Syntax Description
source |
Source address for SA cache information. |
group |
(Optional) Group address for SA cache information. |
asn |
(Optional) Autonomous system (AS) number. |
peer peer |
(Optional) Specifies the IP address of a peer. |
detail |
(Optional) Displays detailed information. |
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
all |
Specifies all VRFs. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
The show ip msdp route command is an alternative form of this command.
This command requires the LAN Base Services license.
Examples
This example shows how to display information about the MSDP SA cache:
switch(
config)#
show ip msdp sa-cache
Related Commands
|
|
clear ip msdp sa-cache |
Clears routes in the MSDP Source-Active cache. |
show ip msdp route |
Displays information about the MSDP SA cache. |
show ip msdp sources
To display information about Multicast Source Discovery Protocol (MSDP) learned sources, use the show ip msdp sources command.
show ip msdp sources [ vrf { vrf-name | all }]
Syntax Description
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
all |
Specifies all VRFs. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about MSDP learned sources:
switch(
config)#
show ip msdp sources
show ip msdp summary
To display summary information about Multicast Source Discovery Protocol (MSDP) peers, use the show ip msdp summary command.
show ip msdp summary [ vrf { vrf-name | all }]
Syntax Description
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. The name can be a maximum of 32 alphanumeric characters and is case sensitive. |
all |
Specifies all VRFs. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display summary information about MSDP peers:
switch(
config)#
show ip msdp summary
show running-config msdp
To display information about the running-system configuration for Multicast Source Discovery Protocol (MSDP), use the show running-config msdp command.
show running-config msdp [ all ]
Syntax Description
all |
(Optional) Displays configured and default information. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about the MSDP running-system configuration:
switch(
config)#
show running-config msdp
!Command: show running-config msdp
!Time: Sat Apr 12 09:14:49 2008
show startup-config msdp
To display information about the startup-system configuration for Multicast Source Discovery Protocol (MSDP), use the show startup-config msdp command.
show startup-config msdp [ all ]
Syntax Description
all |
(Optional) Displays configured and default information. |
Command Modes
Any command mode
Command History
|
|
5.0(3)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about the startup-system configuration for MSDP:
switch(
config)#
show startup-config msdp