-- Copyright (c) 2003-2009, 2011 by Cisco Systems, Inc.
--
-- Proprietary Information of Cisco Systems Inc.
--
-- Module: BTS10200 Softswitch Mib Definition.
--
-- Revision: 6.0
--
-- Authors: Brandon Doan
-- Pramod Rao
--
IPCELL-CA-MIB DEFINITIONS ::= BEGIN
IMPORTS
YesNo,
ClearMeasurement,
Integer0To100,
DisplayString0To64,
Integer1To100,
DisplayString0To255,
Integer1To9999,
DisplayString1To255,
DisplayString1To32,
SuperRouteType,
DisplayString1To64,
Integer0To9999,
DayOfWeek,
KAMState,
DisplayString0To16,
Integer1To200,
Integer1To4,
Integer0To512,
Integer1To512,
Integer0To65535,
StatInterval,
DisplayString1To200,
DisplayString1To16,
TimeOfDay,
ADMAdminState,
ADMTargetState,
MGWOperState,
AGGROperState,
SGPOperState,
DPCOperState,
SCTPAssOperState,
TrunkGrpOperState,
TerminationOperState,
TrunkTermStaticState,
TrunkTermDynamicState,
SCTPAssTargetState,
ADMMode,
MinuteSecondString,
ControlState,
DisplayString0To32,
OptiMGWOperState,
OptiTerminationOperState,
OptiTrunkGrpOperState
FROM IPCELL-TC
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, TimeTicks, Counter32, Counter64, Integer32, IpAddress, enterprises, mib-2
FROM SNMPv2-SMI
DisplayString, RowStatus, TruthValue, DateAndTime
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF;
--
--YesNo ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "yes/no enumerator (yes = 1, no = 2)"
-- SYNTAX INTEGER { yes ( 1 ) , no ( 2 ) }
--
--ClearMeasurement ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Clear Measurement (clear = 1; for SETs only, notCleared = 2; for GETs only)"
-- SYNTAX INTEGER { clear ( 1 ) , notCleared ( 2 ) }
--
--Integer0To100 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer size from 0 to 100"
-- SYNTAX INTEGER ( 0..100 )
--
--DisplayString0To64 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "DisplayString size from 0 to 64"
-- SYNTAX DisplayString ( SIZE ( 0..64 ) )
--
--Integer1To100 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer size from 1 to 100"
-- SYNTAX INTEGER ( 1..100 )
--
--DisplayString0To255 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "DisplayString size from 0 to 255"
-- SYNTAX DisplayString ( SIZE ( 0..255 ) )
--
--Integer1To9999 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer size from 1 to 9999"
-- SYNTAX INTEGER ( 1..9999 )
--
--DisplayString1To255 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "DisplayString size from 1 to 255"
-- SYNTAX DisplayString ( SIZE ( 1..255 ) )
--
--DisplayString1To32 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "DisplayString size from 1 to 32"
-- SYNTAX DisplayString ( SIZE ( 1..32 ) )
--
--SuperRouteType ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Super Route Type"
-- SYNTAX INTEGER { tod ( 1 ) , percent ( 2 ) , prefix ( 3 ) , linebase ( 4 ) , eightXX( 5 ) , route ( 6 ) , callingArea ( 7 ) }
--
--DisplayString1To64 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "DisplayString size from 1 to 64"
-- SYNTAX DisplayString ( SIZE ( 1..64 ) )
--
--Integer0To9999 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer size from 0 to 9999"
-- SYNTAX INTEGER ( 0..9999 )
--
--DayOfWeek ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Day of week enumeration"
-- SYNTAX INTEGER { sun ( 1 ) , mon ( 2 ) , tue ( 3 ) , wed ( 4 ) , thu ( 5 ) , fri ( 6 ) , sat ( 7 ) }
--
--KAMState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "One of specified State. Values 1-3 can be used int SET requests; values 4-30 are returned in GET requests"
-- SYNTAX INTEGER { normal ( 1 ) , forcedActiveStandby ( 2 ) , forcedStandbyActive ( 3 ), initialNormal ( 4 ), activeNormal (5), standbyNormal (6), transActiveNormal (7), transStandbyNormal (8), oosFaulty (9), unknown (10), oosAdmin (11), activeForced (12), standbyForced (13), transActiveForced (14), transStandbyForced (15), startNormal (25) }
--
--DisplayString0To16 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "DisplayString size from 0 to 16"
-- SYNTAX DisplayString ( SIZE ( 0..16 ) )
--
--Integer1To200 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer with size of 1 to 200"
-- SYNTAX INTEGER ( 1..200 )
--
--Integer1To4 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer size from 1 to 4"
-- SYNTAX INTEGER ( 1..4 )
--
--Integer0To512 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer size from 0 to 512"
-- SYNTAX INTEGER ( 0..512 )
--
--Integer1To512 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer size from 1 to 512"
-- SYNTAX INTEGER ( 1..512 )
--
--Integer0To65535 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer size from 0 to 65535"
-- SYNTAX INTEGER ( 0..65535 )
--
--StatInterval ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Integer size from 1 to 96"
-- SYNTAX INTEGER ( 1..96 )
--
--DisplayString1To200 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Display string in of size 1 to 200"
-- SYNTAX DisplayString ( SIZE ( 1..200 ) )
--
--DisplayString1To16 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "DisplayString size from 1 to 16"
-- SYNTAX DisplayString ( SIZE ( 1..16 ) )
--
--TimeOfDay ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "5 Characters in the format: hh:mm"
-- SYNTAX DisplayString ( SIZE ( 5 ) )
--
--ADMTargetState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Trunk/Gateway Status"
-- SYNTAX INTEGER { notSet ( 1 ), maintenance ( 2 ) , inService ( 3 ) , outOfService ( 4 ) , unequipped ( 5 ) }
--
--SCTPAssTargetState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "SCTP Associated Target State"
-- SYNTAX INTEGER { notSet ( 1 ), inService ( 2 ) , outOfService ( 3 ) }
--
--MGWOperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "MGW Operational Status"
-- SYNTAX INTEGER { mgwStatusUnknown ( 1 ), mgwStatusWorking ( 2 ), mgwStatusDown ( 3 ) , mgwStatusUnreachable ( 4 ) }
--
--AGGROperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "AGGR Operational Status"
-- SYNTAX INTEGER { aggrInitializing ( 1 ), aggrConnecting ( 2 ), aggrOutOfService ( 3 ) , aggrInService ( 4 ), aggrUnknownState ( 5 ) }
--
--OptiMGWOperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "MGW Operational Status"
-- SYNTAX INTEGER { nonFaulty ( 1 ), faulty ( 2 ), nonFaultyRemotelyBlocked ( 3 ), faultyRemotelyBlocked ( 4 ) }
--
--OptiTerminationOperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Termination Operational Status"
-- SYNTAX INTEGER { nonFaulty ( 1 ), faulty ( 2 ), nonFaultyRemotelyBlocked ( 3 ), faultyRemotelyBlocked ( 4 ) }
--
--OptiTrunkGrpOperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Trunk Group Operational Status"
-- SYNTAX INTEGER { nonFaulty ( 1 ), faulty ( 2 ), nonFaultyRemotelyBlocked ( 3 ), faultyRemotelyBlocked ( 4 ) }
--
--TrunkGrpOperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Trunk Grp Operational Status"
-- SYNTAX INTEGER { tgIns ( 1 ), tgOos ( 2 ) , tgMb ( 3 ) , tgWait ( 4 ), tgStby ( 5 ), tgRestoreSessionSetReqNormal ( 6 ), tgRestoreSessionSetReqSwitchover ( 7 ), tgRestoreSessionSetReqMaint ( 8 ), tgRestoreSessionSetFailNormal ( 9 ), tgRestoreSessionSetFailSwitchover ( 10 ), tgRestoreSessionSetFailMaint ( 11 ), tgRestoreEstablishReqNormal ( 12 ), tgRestoreEstablishReqSwitchover ( 13 ), tgRestoreEstablishReqMaint ( 14 ), tgRestoreEstablishFailNormal ( 15 ), tgRestoreEstablishFailSwitchover ( 16 ), tgRestoreEstablishFailMaint ( 17 ), tgMaint ( 18 ), tgDownSessionSetFailSoftNormal ( 19 ), tgDownSessionSetFailHardNormal ( 20 ), tgDownSessionSetFailSoftMaint ( 21 ), tgDownSessionSetFailHardMaint ( 22 ), tgDownEstablishReqSoftNormal ( 23 ), tgDownEstablishReqHardNormal ( 24 ), tgDownEstablishReqSoftMaint ( 25 ), tgDownEstablishReqHardMaint ( 26 ), tgDownEstablishFailSoftNormal ( 27 ), tgDownEstablishFailHardNormal ( 28 ), tgDownEstablishFailSoftMaint ( 29 ), tgDownEstablishFailHardMaint ( 30 ), tgRemoveGraceful ( 31 ), tgRemoveReleaseReq ( 32 ), tgRemoveSessionSetReq ( 33 ), tgRemoveGracefulInsMaint ( 34 ), tgSeizedFarEnd ( 35 ), tgUnknownState ( 36 ) }
--
--TerminationOperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Termination Operational Status"
-- SYNTAX INTEGER { termStateNotAudited ( 1 ), termAvailNewCalls ( 2) , termIntializationAudit ( 3 ) , termProgressFaultRecovery ( 4 ), termNotWorkingNeedManualIntervention (5), termNotAvailNeedRsipResetMsg (6), termUnreachable (7), termUnreachableRecoveryInProcess ( 8 ), termReservedNotInCall ( 9 ) , termInTransientIncomingOutgoingCall ( 10 ) , termInitializedInStableCall ( 11 ), termInStableCallGoingDown (12), termNotInitializedTransientCallInProgress (13), termNotInitializedReservedFeatCall (14), termFaultRecoveryOnInTransientCall (15), termInFaultInTransientCall (16), termUnreachableRecoveryOnInTransientCall (17), termInTransientCallGoingDown (18), termFaultRecoveryOnInStableCall (19), termFaultInStableCall (20), termUnreachableRecoveryOnInStableCall (21), termStateUndefined (22), h323TermIdleState (23), h323TermIncomingBusyState (24), h323TermOutgoingBusyState (25), h323TermTransientState (26), h323TermIncomingBusyTransientState (27), h323TermOutgoingBusyTransientState (28) }
--
--SGPOperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "SGP Operational Status"
-- SYNTAX INTEGER { notInUse ( 1 ), inService ( 2) , oosSctpAssocDown ( 3 ) , oosM3uaDown ( 4 ), unknown (5), operNotSupported ( 6 ) }
--
--DPCOperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "DPC Operational Status"
-- SYNTAX INTEGER { available ( 1 ), unavailable ( 2) , congested ( 3 ) , congestedAtLevelOne ( 4 ), congestedAtLevelTwo (5), congetstedAtLevelThree (6), userPartUnavailable (7), unknown ( 8 ), operNotSupported ( 9 ), notInUse (10) }
--
--SCTPAssOperState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "SCTP Association Operational Status"
-- SYNTAX INTEGER { notInUse ( 1 ), oos ( 2) , inService ( 3 ) , unknown ( 4 ), operNotSupported (5) }
--
--ADMAdminState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Trunk/Gateway Admin Status"
-- SYNTAX INTEGER { adminIns ( 1 ), adminOos ( 2 ) , adminMaint ( 3 ) , adminOosPending ( 4 ), adminMaintPending (5), adminUeqp (6), adminForcedStandbyActive (7), adminForcedActiveStandby (8), adminNormal (9), adminNull (10), unknown (11) }
--
--TrunkTermStaticState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Trunk/Gateway Static Status"
-- SYNTAX INTEGER { actv ( 1 ), lblk ( 2 ) , rblk ( 3 ), lblkRblk( 4 ), ueqp ( 5 ), invalidState ( 6 ), unknown ( 7 ) }
--
--TrunkTermDynamicState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Trunk/Gateway Oper Status"
-- SYNTAX INTEGER { idle ( 1 ), ibsy ( 2 ) , obsy ( 3 ) , trans ( 4 ), transIbsy ( 5 ), transObsy ( 6 ), invalidState ( 7 ), unknown ( 8 ) }
--
--ADMMode ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "ADM Status/Control Mode"
-- SYNTAX INTEGER { notSet ( 1 ), forced ( 2 ), graceful ( 3 ) }
--
--
--ControlState ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Handles the stateless nature of sets. When the user is done setting each individual cell within a row, they will set this variable to 1. If all the rows are not set, then insufficient data will be returned.
--If it's successful, then committed is returned. When the user does a get on this variable, only insufficientData or readyToCommit is returned. Normally, after the user peforms a commit, the agent clears the data"
-- SYNTAX INTEGER { commit ( 1 ) , insufficientData ( 2 ) , readyToCommit ( 3 ), committed ( 4 ) }
--
--MinuteSecondString ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "Minute/Second string in the format: mm:ss"
-- SYNTAX DisplayString (SIZE(5))
--
--DisplayString0To32 ::= TEXTUAL-CONVENTION
-- STATUS current
-- DESCRIPTION "DisplayString size from 0 to 32"
-- SYNTAX DisplayString ( SIZE ( 0..32 ) )
--
opticall MODULE-IDENTITY
LAST-UPDATED "200504071400Z"
ORGANIZATION "Cisco BTS10200 Softswitch"
CONTACT-INFO "Cisco Systems Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Phone: +1 800 553-NETS
EMail: BTS-SUPPORT@cisco.com"
DESCRIPTION
"The MIB module supplies the basic management object
for the Cisco BTS10200 Call Agent."
REVISION "200504071400Z"
DESCRIPTION "Renamed SIS and SIA counters"
REVISION "200404021400Z"
DESCRIPTION
"
Modified Following:
1. Added H323 Termination Operation States.
2. Obsoleted all emsTraps and callAgentTraps - replaced all traps with new
trap structure under following new Object IDs: billingTraps,
callpTraps, configTraps, databaseTraps, maintenanceTraps, ossTraps,
securityTraps, signalingTraps, statisticsTraps, systemTraps, auditTraps.
3. Removed Sequence Number as a valid search criteria for event retransmission.
4. Modified description of start and date of event retrasmission tokens to
remove milliseconds.
5. Added following new Stat Tables: statPCTToolsTable, statAINToolsTable,
statCallToolsTable.
6. Modified counters in statAINSVCTable.
7. Obsoleted table statISUPTable.
8. Added additional counters to statISDNTranslationTable.
"
REVISION "200305221400Z"
DESCRIPTION
"
Shuffled around last few EmsTraps OID to synchronize with previous 3.5 mib.
"
REVISION "200210241400Z"
DESCRIPTION
"
Modified Following:
1. KAMState added six additional states (25-30).
2. TerminationOperState valid states have completely changed.
3. DPCOperState added an additional state (10).
4. Moved tables from ss7Adapter branch to signalingAdapterStatusControl:
sgpOAMPTable, dpcOAMPTable, sctpAssOAMPTable
5. Added branches: fsStatistics, signalingAdapterStatistics,
signalingAdapterStatusControl, signalingAdapterTrapPrefix.
6. Added new counters to Statistics Table: statPOTSFSTable, statSIMTable,
statSIATable, statISDNTransTable.
7. Removed counters from Statistics Table: statTGUsageTable.
8. Obsoleted counters from Statistics Table: statBillingTable.
9. Added new Statistics Table: statISUPSGATable, statDQOSTable, statEMATable,
statAINSVCTable, statINAPTable, statTSATable, statTCAPTable,
statSCCPTable, statM3UATable, statSUATable, statSCTPTable
10. Obsoleted Statistics Table: statAINFSTable, statTrunkTable.
11. Obsoleted Optimized Table: optiMediaGatewayOAMPTable,
optiSubscrLineTermOAMPTable, optiTrunkGroupOAMPTable,
optiTrunkTermOAMPTable
12. Modified trap name and/or descriptions for: emsTraps (126, 127, 134)
and callAgentTraps (5, 16, 74, 90, 91)
13. Obsoleted traps: emsTraps (129) and callAgentTraps(42).
14. Added traps: emsTraps (148-156) and callAgentTraps (92-98).
15. Added aggrOAMPTable to perform status/control on AGGR.
15. Added mechanism to retrieve fast Bulk Statuses in following tables: mgwBulkStatTable, trunkGroupBulkStatPage, subscriberTermBulkStatTable, trunkTermBulkStatTable.
"
REVISION "200206131400Z"
DESCRIPTION
"
Modified Following:
1. Added additional counters to statistics table of BILLING.
2. Added traps emsTraps 132-144.
3. Added columns TrapDestFilterTypes and TrapDestFilterLevels to TrapDestTable.
4. Added Varbinds alarmSubsystem, alarmSeverity, and alarmID to all traps.
5. Added more details in description of traffic counters/statisitics.
6. Added more details in description of traps.
"
REVISION "200204161400Z"
DESCRIPTION
"
Modified Following:
1. Added additional counters to statistics table of POTS FS, AIN FS, SIM,
and SIA.
2. Changed all occurences of OtherNxx to just Nxx in statistics tables POTS FS,
SIM, and SIA.
3. Modified counters in statistics table H323.
4. Added additional counters to statistics table ISUP.
5. Added traps emsTraps 122-131 and callAgentTraps 73-91.
"
REVISION "200101151400Z"
DESCRIPTION
"Added NAS counters to Call Processing Statistics Table. Deleted some commented lines."
REVISION "200011291400Z"
DESCRIPTION
"Added back the optimized Status/Control Tables for MGW, Trunk Grp, Sub Term, and Trunk Term."
REVISION "200010261400Z"
DESCRIPTION
"Added statTrunkTable."
REVISION "200010141400Z"
DESCRIPTION
"Removed optimized Status/Control Tables for MGW, Trunk Grp, Sub Term, and Trunk Term."
REVISION "200010091400Z"
DESCRIPTION
"
Modified following:
1. Removed comments.
2. Added UEQP to Status/Control Tables.
3. Added optimized Status/Control Tables for MGW, Trunk Grp, Sub Term, and Trunk Term.
4. Update the list of Traps to reflect what is supported (generated) on EMS.
5. Added one new entry to statSIMTable.
6. Added serveral new entries to statPOTSFSTable.
7. Modified Trunk Group Number from Integer 1-9999 to Integer32.
8. Made TrapDest Table modifiable through BTS10200 Softswitch CLI instead of via NMS.
"
REVISION "200010051400Z"
DESCRIPTION
"
Modified Following:
1. Added EMS traps 114-122 (Maintenance Subsystem).
2. Added BDMS status/control.
3. Changed the returnable states for Status/Control: KAMState,
TrunkGrpOperState, TerminationOperState, ADMAdminState, TrunkTermStaticState,
TrunkTermDynamicState, and MGWOperState
"
REVISION "200008011400Z"
DESCRIPTION
"
Modified Following:
1. Added statH323Table.
2. Added additional counters to statCallProcessingTable.
3. Added additional traps.
4. Added additional counters to statPOTSFSTable.
"
REVISION "200003051400Z"
DESCRIPTION
"Changed AIN_FS Measurement. Removed SIP_REINVITE_RECEIVED
and SIP_REINVITE_SENT from all measurement tables that contains those
entries. Added additional traps."
::= { ipcell 1 }
ipcell OBJECT IDENTIFIER ::= { enterprises 5296 }
ems OBJECT IDENTIFIER ::= { opticall 2 }
callAgent OBJECT IDENTIFIER ::= { opticall 3 }
featureServer OBJECT IDENTIFIER ::= { opticall 4 }
statusControlOptimized OBJECT IDENTIFIER ::= { opticall 5 }
-- If needing to a constant polling for Status/Control of particular
-- elements, this branch should be used instead of the
-- callAgentStatusControl branch. The queries to this branch is
-- considerably faster and is less expensive on the SNMP Agent CPU cycle.
-- This will give faulty/non-faulty states which suffices most situations.
emsOptimized OBJECT IDENTIFIER ::= { statusControlOptimized 1 }
callAgentOptimized OBJECT IDENTIFIER ::= { statusControlOptimized 2 }
featureServerOptimized OBJECT IDENTIFIER ::= { statusControlOptimized 3 }
signalingAdapter OBJECT IDENTIFIER ::= { opticall 6 }
fsAin OBJECT IDENTIFIER ::= { featureServer 1 }
fsPotsCtx OBJECT IDENTIFIER ::= { featureServer 2 }
fsStatistics OBJECT IDENTIFIER ::= { featureServer 4 }
emsStatusControl OBJECT IDENTIFIER ::= { ems 1 }
emsTrapPrefix OBJECT IDENTIFIER ::= { ems 2 }
emsTraps OBJECT IDENTIFIER ::= { emsTrapPrefix 0 }
emsStatistics OBJECT IDENTIFIER ::= { ems 3 }
callAgentStatusControl OBJECT IDENTIFIER ::= { callAgent 1 }
-- See comments regarding usage under statusControlOptimized OID
callAgentTrapPrefix OBJECT IDENTIFIER ::= { callAgent 2 }
callAgentTraps OBJECT IDENTIFIER ::= { callAgentTrapPrefix 0 }
callAgentStatistics OBJECT IDENTIFIER ::= { callAgent 3 }
fsPotsCtxStatusControl OBJECT IDENTIFIER ::= { fsPotsCtx 1 }
fsPotsCtxTrapPrefix OBJECT IDENTIFIER ::= { fsPotsCtx 2 }
fsPotsCtxTraps OBJECT IDENTIFIER ::= { fsPotsCtxTrapPrefix 0 }
fsPotsCtxStatistics OBJECT IDENTIFIER ::= { fsPotsCtx 3 }
fsAinStatusControl OBJECT IDENTIFIER ::= { fsAin 1 }
fsAinTrapPrefix OBJECT IDENTIFIER ::= { fsAin 2 }
fsAinTraps OBJECT IDENTIFIER ::= { fsAinTrapPrefix 0 }
fsAinStatistics OBJECT IDENTIFIER ::= { fsAin 3 }
signalingAdapterStatusControl OBJECT IDENTIFIER ::= { signalingAdapter 1 }
signalingAdapterTrapPrefix OBJECT IDENTIFIER ::= { signalingAdapter 2 }
signalingAdapterStatistics OBJECT IDENTIFIER ::= { signalingAdapter 3 }
signalingAdapterTraps OBJECT IDENTIFIER ::= { signalingAdapterTrapPrefix 0 }
statusControlBulk OBJECT IDENTIFIER ::= { opticall 8 }
generalTrafficMeasurement OBJECT IDENTIFIER ::= { opticall 9 }
generalTraps OBJECT IDENTIFIER ::= { opticall 1 }
btsTrapPrefix OBJECT IDENTIFIER ::= { generalTraps 5 }
billingTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 1 }
callpTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 2 }
configTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 3 }
databaseTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 4 }
maintenanceTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 5 }
ossTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 6 }
securityTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 7 }
signalingTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 8 }
statisticsTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 9 }
systemTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 10 }
auditTraps OBJECT IDENTIFIER ::= { btsTrapPrefix 11 }
system OBJECT IDENTIFIER ::= { mib-2 1 }
alarmObjectTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlarmObjectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of variables detailing a trap sent up with the trap."
::= { generalTraps 1 }
alarmObjectEntry OBJECT-TYPE
SYNTAX AlarmObjectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a variable corresponding to a variable within an opticall event."
INDEX { alarmSubsystem, alarmServerity, alarmID }
::= { alarmObjectTable 1 }
AlarmObjectEntry ::= SEQUENCE {
alarmSubsystem INTEGER,
alarmServerity INTEGER,
alarmID INTEGER,
alarmSetCleared INTEGER,
alarmComponentID DisplayString1To64,
alarmComponentType DisplayString1To64,
alarmDetails DisplayString,
alarmTime DisplayString
}
alarmSubsystem OBJECT-TYPE
SYNTAX INTEGER { billing ( 1 ), callp ( 2 ) , config ( 3 ) , database ( 4 ) , maintenance ( 5 ) , oss ( 6 ) , security ( 7 ) , signaling ( 8 ) , statistics ( 9 ) , system ( 10 ) , audit ( 11 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subsystem which generated the alarm"
::= { alarmObjectEntry 1 }
alarmServerity OBJECT-TYPE
SYNTAX INTEGER { critical ( 1 ) , major ( 2 ) , minor ( 3 ) , warning ( 4 ) , informational ( 5 ) , debug ( 6 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Severity of the alarm."
::= { alarmObjectEntry 2 }
alarmID OBJECT-TYPE
SYNTAX INTEGER ( 0..2147483647 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm identification number"
::= { alarmObjectEntry 3 }
alarmSetCleared OBJECT-TYPE
SYNTAX INTEGER { off ( 1 ) , on ( 2 ) , ignore ( 3 ) , acknowledge ( 4 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm OFF, ON, IGNORED, or ACKNOWLEDGED"
::= { alarmObjectEntry 4 }
alarmComponentID OBJECT-TYPE
SYNTAX DisplayString1To64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm Component ID"
::= { alarmObjectEntry 5 }
alarmComponentType OBJECT-TYPE
SYNTAX DisplayString1To64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm Component Type"
::= { alarmObjectEntry 6 }
alarmDetails OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1..65536 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Details of the alarms in the format:
key1=value1; key2=value2; ...; key8=value8
Maximum key/value pair is 8."
::= { alarmObjectEntry 7 }
alarmTime OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time alarm was generated. It is in the form:
dow mon dd hh:mm:ss zzz yyyy
where:
dow is the day of the week (Sun, Mon, Tue, Wed, Thu, Fri, Sat).
mon is the month (Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep,
Oct, Nov, Dec).
dd is the day of the month (01 through 31), as two decimal
digits.
hh is the hour of the day (00 through 23), as two decimal
digits.
mm is the minute within the hour (00 through 59), as two
decimal digits.
ss is the second within the minute (00 through 61), as two
decimal digits.
zzz is the time zone (and may reflect daylight savings time).
Standard time zone abbreviations include those
recognized by the method parse. If time zone
informationi is not available, then zzz is
empty - that is, it consists of no characters at all.
yyyy is the year, as four decimal digits."
::= { alarmObjectEntry 8 }
sysDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual description of the entity. This value
should include the full name and version
identification of the system's hardware type,
software operating-system, and networking
software. It is mandatory that this only contain
printable ASCII characters."
DEFVAL { "IPCell Opticall SNMP Agent" }
::= { system 1 }
sysObjectID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor's authoritative identification of the
network management subsystem contained in the
entity. This value is allocated within the SMI
enterprises subtree (1.3.6.1.4.1) and provides an
easy and unambiguous means for determining `what
kind of box' is being managed. For example, if
vendor `Flintstones, Inc.' was assigned the
subtree 1.3.6.1.4.1.4242, it could assign the
identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
Router'.:
read-command : C:\windows\ping kiwi"
DEFVAL { { 1 3 6 1 4 1 5296 1 } }
::= { system 2 }
sysUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
network management portion of the system was last
re-initialized.:
READ-COMMAND: echo sysuptime"
::= { system 3 }
sysContact OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The textual identification of the contact person
for this managed node, together with information
on how to contact this person.:
READ-COMMAND: c:\windows\netstat -n"
::= { system 4 }
sysName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An administratively-assigned name for this
managed node. By convention, this is the node's
fully-qualified domain name."
::= { system 5 }
sysLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The physical location of this node (e.g.,
`telephone closet, 3rd floor')."
::= { system 6 }
sysServices OBJECT-TYPE
SYNTAX INTEGER (0..127)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value which indicates the set of services that
this entity primarily offers.
The value is a sum. This sum initially takes the
value zero, Then, for each layer, L, in the range
1 through 7, that this node performs transactions
for, 2 raised to (L - 1) is added to the sum. For
example, a node which performs primarily routing
functions would have a value of 4 (2^(3-1)). In
contrast, a node which is a host offering
application services would have a value of 72
(2^(4-1) + 2^(7-1)). Note that in the context of
the Internet suite of protocols, values should be
calculated accordingly:
layer functionality
1 physical (e.g., repeaters)
2 datalink/subnetwork (e.g., bridges)
3 internet (e.g., IP gateways)
4 end-to-end (e.g., IP hosts)
7 applications (e.g., mail relays)
For systems including OSI protocols, layers 5 and
6 may also be counted."
::= { system 7 }
trapDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrapDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of trap destination entries."
::= { generalTraps 2 }
trapDestEntry OBJECT-TYPE
SYNTAX TrapDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes a destination IP address to which to send
traps for this community."
INDEX { trapDestIndex }
::= { trapDestTable 1 }
TrapDestEntry ::= SEQUENCE {
trapDestIndex Integer32,
trapDestCommunity OCTET STRING,
trapDestAddress IpAddress,
trapDestPort INTEGER,
trapDestOwner DisplayString,
trapDestStatus RowStatus,
trapDestFilterTypes Integer32,
trapDestFilterLevels Integer32
}
trapDestIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value that uniquely identifies this trapDestEntry.
Whatever value entered will be overwritten to be a unique value when stored."
::= { trapDestEntry 1 }
trapDestCommunity OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE ( 0..127 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A community to which this destination address belongs.
This entry is associated with any eventEntries in the RMON
MIB whose value of eventCommunity is equal to the value of
this object. Every time an associated event entry sends a
trap due to an event, that trap will be sent to each
address in the trapDestTable with a trapDestCommunity equal to
eventCommunity.
This object may not be modified if the associated
trapDestStatus object is equal to active(1)."
::= { trapDestEntry 2 }
trapDestAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address to send traps on behalf of this entry."
::= { trapDestEntry 3 }
trapDestPort OBJECT-TYPE
SYNTAX INTEGER ( 1..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port to send traps on behalf of this entry."
::= { trapDestEntry 4 }
trapDestOwner OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..127 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entity that configured this entry and is
therefore using the resources assigned to it."
::= { trapDestEntry 5 }
trapDestStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this trap destination entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value."
::= { trapDestEntry 6 }
trapDestFilterTypes OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ranges from 0-32767. A bitmask that specifies which
subsystem types of the events to filter or permitted to be
sent to this address. This is used in combination with
Filterlevels to provide a granular filter for traps from the
SNMP Agent side. From right to left the following bits
specifies the following subsystem types:
Bit #1: BILLING (right-most bit)
Bit #2: CALLP
Bit #3: CONFIG
Bit #4: DATABASE
Bit #5: MAINTENANCE
Bit #6: OSS
Bit #7: SECURITY
Bit #8: SIGNALING
Bit #9: STATISTICS
Bit #10: SYSTEM
Bit #11: AUDIT (left-most bit)
For example, in order to receive only CONFIG, DATABASE, and
SIGNALING traps, then the filter in binary would
be (0010001100) which converts to integer value of (140) to be
entered as the token value. If all types are to be received
then the binary would be (1111111111) which converts
to (1023) as the token value. And likewise if no types are to
be received then the binary would be (0000000000) which
converts to (0) as the token value."
::= { trapDestEntry 7 }
trapDestFilterLevels OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ranges from 0-63. A bitmask that specifies which levels of
the events to filter or permitted to be sent to this address.
This is used in combination with Filtertypes to provide a
granular filter for traps from the SNMP Agent side. From
right to left the following bits specifies the following
levels:
Bit #1: DEBUG (right-most bit)
Bit #2: INFO
Bit #3: WARNING
Bit #4: MINOR
Bit #5: MAJOR
Bit #6: CRITICAL (left-most bit)
For example, in order to receive only INFO, MINOR, and MAJOR
traps, then the filter in binary would be (011010) which
converts to integer value of (26) to be entered as the token
value. If all levels are to be received then the binary would
be (111111) which converts to (63) as the token value. And
likewise if no levels are to be received then the binary would
be (000000) which converts to (0) as the token value.
WARNING: Any filter that permits levels DEBUG and/or INFO
traps will cause a high number of traps to be sent and tax the
system resources on the SNMP Agent on the EMS; care must be
taken when specifying numbers that converts to binary
containing bits 1 or 2 turned on such
as (49-51), (57-59), (61-63), etc.!"
::= { trapDestEntry 8 }
eventRetransmission OBJECT IDENTIFIER ::= { generalTraps 3 }
eventHistory OBJECT IDENTIFIER ::= { eventRetransmission 1 }
eventSequenceNumStart OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number of the oldest event contained in
the event history db. The result return is the
immediate snapshot of what is in the db. Therefore,
it could change immediately after retrieval."
::= { eventHistory 1 }
eventSequenceNumEnd OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number of the newest event contained in
the event history db. The result return is the
immediate snapshot of what is in the db. Therefore,
it could change immediately after retrieval."
::= { eventHistory 2 }
eventDateStampStart OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of the oldest event contained in
the event history db. The result return is the immediate
snapshot of what is in the db. Therefore, it could change
immediately after retrieval.
The date string is in the form:
yyyy-MM-dd HH:mm:ss.SSS
where:
yyyy is the year, as four decimal digits.
MM is the month of the year (01 through 12), as two decimal
digits.
dd is the day of the month (01 through 31), as two decimal
digits.
HH is the hour of the day (00 through 23), as two decimal
digits.
mm is the minute within the hour (00 through 59), as two
decimal digits.
ss is the second within the minute (00 through 61), as two
decimal digits.
SSS is the millisecond (000 through 999), as three
decimal digits."
::= { eventHistory 3 }
eventDateStampEnd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date of the newest event contained in
the event history db. The result return is the immediate
snapshot of what is in the db. Therefore, it could change
immediately after retrieval.
The date string is in the form:
yyyy-MM-dd HH:mm:ss.SSS
where:
yyyy is the year, as four decimal digits.
MM is the month of the year (01 through 12), as two decimal
digits.
dd is the day of the month (01 through 31), as two decimal
digits.
HH is the hour of the day (00 through 23), as two decimal
digits.
mm is the minute within the hour (00 through 59), as two
decimal digits.
ss is the second within the minute (00 through 61), as two
decimal digits.
SSS is the millisecond (000 through 999), as three
decimal digits."
::= { eventHistory 4 }
retransmitExecuteParameters OBJECT IDENTIFIER ::= { eventRetransmission 2 }
retranParamSeqNumStart OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Retransmission of events using sequence numbers in the
db. Refer to eventHistory OIDs for the
valid range of sequence numbers.
If retranParamSeqNumStart is set
then it will be assumed all events between the
retranParamSeqNumStart and the latest event will be
transmitted.
If retranParamSeqNumStart AND retranParamDateStart is used,
then retranParamDateStart (in conjunction with
retranParamDateEnd - if used) takes precedence over retranParamSeqNumStart.
To clear this value, set it to '0' (zero)."
::= { retransmitExecuteParameters 1 }
retranParamDateStart OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Retransmission of events using date in the
db. This parameter, inclusive, is used in conjuction with
retranParamDateEnd, inclusive, to specify the range of events
to be retransmitted. Refer to eventHistory OIDs for the
valid range of dates.
If this parameter is set and retranParamDateEnd is not,
then it will be assumed all events between the
retranParamDateStart and the latest event will be
transmitted.
If retranParamDateStart is set and retranParamDateEnd is
not, then it will be assumed all events between the
retranParamDateStart and the latest event will be
transmitted.
If retranParamDateEnd is set and retranParamDateStart is
not, then it will be assumed all events up to the
retranParamDateEnd will be transmitted.
If retranParamSeqNumStart AND retranParamDateStart is used,
then retranParamDateStart (in conjunction with
retranParamDateEnd - if used) takes precedence over retranParamSeqNumStart.
To clear this value set it to ''.
The date string is in the form:
yyyy-MM-dd HH:mm:ss
where:
yyyy is the year, as four decimal digits.
MM is the month of the year (01 through 12), as two decimal
digits.
dd is the day of the month (01 through 31), as two decimal
digits.
HH is the hour of the day (00 through 23), as two decimal
digits.
mm is the minute within the hour (00 through 59), as two
decimal digits.
ss is the second within the minute (00 through 61), as two
decimal digits."
::= { retransmitExecuteParameters 3 }
retranParamDateEnd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Retransmission of events using date in the
db. This parameter, inclusive, is used in conjuction with
retranParamDateStart, inclusive, to specify the range of events
to be retransmitted. Refer to eventHistory OIDs for the
valid range of sequence numbers.
If retranParamDateStart is set and retranParamDateEnd is
not, then it will be assumed all events between the
retranParamDateStart and the latest event will be
transmitted.
If retranParamDateEnd is set and retranParamDateStart is
not, then it will be assumed all events up to the
retranParamDateEnd will be transmitted.
If retranParamSeqNumStart AND retranParamDateStart is used,
then retranParamDateStart (in conjunction with
retranParamDateEnd - if used) takes precedence over retranParamSeqNumStart.
To clear this value set it to ''.
The date string is in the form:
yyyy-MM-dd HH:mm:ss
where:
yyyy is the year, as four decimal digits.
MM is the month of the year (01 through 12), as two decimal
digits.
dd is the day of the month (01 through 31), as two decimal
digits.
HH is the hour of the day (00 through 23), as two decimal
digits.
mm is the minute within the hour (00 through 59), as two
decimal digits.
ss is the second within the minute (00 through 61), as two
decimal digits."
::= { retransmitExecuteParameters 4 }
retranParamLimit OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Limit the number of events to be retransmitted.
To clear this value set it to '0' (zero)."
::= { retransmitExecuteParameters 5 }
retranParamSeverity OBJECT-TYPE
SYNTAX INTEGER { notSet ( 0 ) , info ( 1 ) , warn ( 2 ) , minor ( 3 ) , major ( 4 ) , critical ( 5 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Retransmission of events that are of a particular
severity only.
To clear this value, set it to '0' (zero)."
DEFVAL {0}
::= { retransmitExecuteParameters 6 }
retranParamType OBJECT-TYPE
SYNTAX INTEGER { notSet ( 0 ) , billing ( 1 ) , callp ( 2 ) , config ( 3 ) , database ( 4 ) , maintenance ( 5 ) , oss ( 6 ) , security ( 7 ) , signaling ( 8 ) , statistics ( 9 ) , system ( 10 ) , audit ( 11 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Retransmission of events that are of a particular
type only.
To clear this value, set it to '0' (zero)."
DEFVAL {0}
::= { retransmitExecuteParameters 7 }
retranParamNMSAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Denotes address(es) of NMS(s) to retransmit traps to.
The list of address(es) are delimited by a semicolon (;) and
must be the same address(es) that are stored in the
TrapDestTable as it appears. If the keyword 'all' (case
insensitve) is specified, then the trap retransmission will
be sent to all NMSs configured in the TrapDestTable. If this
field is NOT set, then the SNMP agent will use the address of
the originator of the request.
To clear this value set it to ''."
::= { retransmitExecuteParameters 8 }
retranParamExecute OBJECT-TYPE
SYNTAX INTEGER { commit ( 1 ) , cancel ( 2 ) , clearAllParameters ( 3 ) , processing ( 4 ) , readyToCommit ( 5 ) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this parameter to '1' (commit) to actually perform the
transmission of events using the parameters set under
retransmitExecuteParameters OID. If not successful, then a
general error is returned. If the manager does a commit
without any parameters set, then ALL events will be sent to
the NMS doing the set. WARNING: this might consume large amount
resources and time to send out all events if there are a
large number of events.
Set the parameter to '2' (cancel) if the NMS requests to stop
and cancel current retransmission from that particular NMS.
If there are no current transmission, then nothing happens.
Set the parameter to '3' (clear-all-parameters) to clear out
all parameters associated for that particular NMS requesting
the set.
If the manager does a get on this parameter, then 2 possible
states will be return: '4' (processing) is returned if
the Agent is in the middle of processing that particular NMSs
previous retransmission request. Or, '5' (ready-to-commit) if
the Agent can handle the request from the NMSs.
The manager must wait at least 10 seconds before executing
another commit"
::= { retransmitExecuteParameters 9 }
currentAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF CurrentAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Metrics related to invocations of the LIDB Query Verification Tools."
::= { generalTraps 6 }
currentAlarmEntry OBJECT-TYPE
SYNTAX CurrentAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for metrics related to invocations of the LIDB Query
Verification Tools statistics Table."
INDEX { currentAlarmID }
::= { currentAlarmTable 1 }
CurrentAlarmEntry ::= SEQUENCE {
currentAlarmID Counter64,
currentAlarmType INTEGER,
currentAlarmNumber Integer32,
currentAlarmDescription DisplayString,
currentAlarmSeverity INTEGER,
currentAlarmStatus INTEGER,
currentAlarmTimeStamp DisplayString,
currentAlarmOrigin DisplayString,
currentAlarmComponentID DisplayString,
currentAlarmDW1 DisplayString,
currentAlarmDW2 DisplayString,
currentAlarmDW3 DisplayString,
currentAlarmDW4 DisplayString,
currentAlarmDW5 DisplayString,
currentAlarmDW6 DisplayString,
currentAlarmDW7 DisplayString,
currentAlarmDW8 DisplayString
}
currentAlarmID OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Alarm Unique Identifier"
::= { currentAlarmEntry 1 }
currentAlarmType OBJECT-TYPE
SYNTAX INTEGER { billing ( 1 ), callp ( 2 ) , config ( 3 ) , database ( 4 ) , maintenance ( 5 ) , oss ( 6 ) , security ( 7 ) , signaling ( 8 ) , statistics ( 9 ) , system ( 10 ) , audit ( 11 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Alarm Type"
::= { currentAlarmEntry 2 }
currentAlarmNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Alarm Number"
::= { currentAlarmEntry 3 }
currentAlarmSeverity OBJECT-TYPE
SYNTAX INTEGER { debug ( 1 ) , info ( 2 ) , warn ( 3 ) , minor ( 4 ) , major ( 5 ) , critical ( 6 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Alarm Type"
::= { currentAlarmEntry 4 }
currentAlarmStatus OBJECT-TYPE
SYNTAX INTEGER { off ( 0 ) , on ( 1 ) , ignore ( 2 ) , acknowledge ( 3 ) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current Alarm Type"
::= { currentAlarmEntry 5 }
currentAlarmDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm Description."
::= { currentAlarmEntry 6 }
currentAlarmTimeStamp OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm Timestamp."
::= { currentAlarmEntry 7 }
currentAlarmOrigin OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm Origin."
::= { currentAlarmEntry 8 }
currentAlarmComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alarm unique Component ID."
::= { currentAlarmEntry 9 }
currentAlarmDW1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dataword 1."
::= { currentAlarmEntry 10 }
currentAlarmDW2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dataword 2."
::= { currentAlarmEntry 11 }
currentAlarmDW3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dataword 3."
::= { currentAlarmEntry 12 }
currentAlarmDW4 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dataword 4."
::= { currentAlarmEntry 13 }
currentAlarmDW5 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dataword 5."
::= { currentAlarmEntry 14 }
currentAlarmDW6 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dataword 6."
::= { currentAlarmEntry 15 }
currentAlarmDW7 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dataword 7."
::= { currentAlarmEntry 16 }
currentAlarmDW8 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Dataword 8."
::= { currentAlarmEntry 17 }
statPOTSFSTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatPOTSFSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"POTS Feature Server Statistics."
::= { fsPotsCtxStatistics 1 }
statPOTSFSEntry OBJECT-TYPE
SYNTAX StatPOTSFSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for POTS Feature Server Table."
INDEX { statPOTSFSComponentID }
::= { statPOTSFSTable 1 }
StatPOTSFSEntry ::= SEQUENCE {
statPOTSFSComponentID DisplayString,
statPOTSFSDOW DayOfWeek,
statPOTSFSTOD TimeOfDay,
statPOTSFSSISInMsgRcv Counter32,
statPOTSFSSISInMsgRcvSucc Counter32,
statPOTSFSSISOutMsgRcv Counter32,
statPOTSFSSISOutMsgRcvSucc Counter32,
statPOTSFSSISMsgREQRETRANRcv Counter32,
statPOTSFSSISMsgREQRETRANXmit Counter32,
statPOTSFSSISMsgRSPRETRANRcv Counter32,
statPOTSFSSISMsgRSPRETRANXmit Counter32,
statPOTSFSSIST1TimerExpired Counter32,
statPOTSFSSIST2TimerReached Counter32,
statPOTSFSSISMsgINVITERcv Counter32,
statPOTSFSSISMsgINVITEXmit Counter32,
statPOTSFSSISMsgCANCELRcv Counter32,
statPOTSFSSISMsgCANCELXmit Counter32,
statPOTSFSSISMsgBYERcv Counter32,
statPOTSFSSISMsgBYEXmit Counter32,
statPOTSFSSISMsgACKRcv Counter32,
statPOTSFSSISMsgACKXmit Counter32,
statPOTSFSSISMsgOPTIONRcv Counter32,
statPOTSFSSISMsgOPTIONXmit Counter32,
statPOTSFSSISMsgREGISTERRcv Counter32,
statPOTSFSSISMsgREGISTERXmit Counter32,
statPOTSFSSISMsgINFORcv Counter32,
statPOTSFSSISMsgINFOXmit Counter32,
statPOTSFSSISMsgNotifyRcv Counter32,
statPOTSFSSISMsgNotifyXmit Counter32,
statPOTSFSSIS100Rcv Counter32,
statPOTSFSSIS100Xmit Counter32,
statPOTSFSSIS18xRcv Counter32,
statPOTSFSSIS18xXmit Counter32,
statPOTSFSSIS200Rcv Counter32,
statPOTSFSSIS200Xmit Counter32,
statPOTSFSSIS3xxRcv Counter32,
statPOTSFSSIS3xxXmit Counter32,
statPOTSFSSIS4xxRcv Counter32,
statPOTSFSSIS4xxXmit Counter32,
statPOTSFSSIS5xxRcv Counter32,
statPOTSFSSIS5xxXmit Counter32,
statPOTSFSSIS6xxRcv Counter32,
statPOTSFSSIS6xxXmit Counter32,
statPOTSFSSIS7xxRcv Counter32,
statPOTSFSSIS7xxXmit Counter32,
statPOTSFSANIScreeningSuccess Counter32,
statPOTSFSANIScreeningBlocked Counter32,
statPOTSFSCallsBlockedNANPBW Counter32,
statPOTSFSCallsBlockedIntlBW Counter32,
statPOTSFSCallsBlocked900Rest Counter32,
statPOTSFSCallsBlocked976Rest Counter32,
statPOTSFSCallsBlockedNANPRest Counter32,
statPOTSFSCallsBlockedIntlRest Counter32,
statPOTSFSCallsBlockedCasualRest Counter32,
statPOTSFSCallsBlockedDARest Counter32,
statPOTSFSCallsBlockedNANPOperRest Counter32,
statPOTSFSCallsBlockedIntlOperRest Counter32,
statPOTSFSAuthCodeSuccess Counter32,
statPOTSFSAuthCodeFailure Counter32,
statPOTSFSAccountCodeSuccess Counter32,
statPOTSFSAccountCodeFailure Counter32,
statPOTSFSMsgCFUActAttempt Counter32,
statPOTSFSMsgCFUDeactAttempt Counter32,
statPOTSFSMsgCFUActRefusals Counter32,
statPOTSFSMsgCFUActAnswered Counter32,
statPOTSFSMsgCFUActSecond Counter32,
statPOTSFSMsgCFUForwardFail Counter32,
statPOTSFSMsgCFUForwardSucc Counter32,
statPOTSFSMsgCFBActAttempt Counter32,
statPOTSFSMsgCFBDeactAttempt Counter32,
statPOTSFSMsgCFBActRefusals Counter32,
statPOTSFSMsgCFBForwardFail Counter32,
statPOTSFSMsgCFBForwardSucc Counter32,
statPOTSFSMsgCFNAActAttempt Counter32,
statPOTSFSMsgCFNADeactAttempt Counter32,
statPOTSFSMsgCFNAActRefusals Counter32,
statPOTSFSMsgCFNAForwardFail Counter32,
statPOTSFSMsgCFNAForwardSucc Counter32,
statPOTSFSMsgCWAttempt Counter32,
statPOTSFSMsgCWAnswered Counter32,
statPOTSFSMsgCWNotAnswered Counter32,
statPOTSFSMsgCWRejectNoResource Counter32,
statPOTSFSMsgCWRejectInteraction Counter32,
statPOTSFSMsgCCWAttempt Counter32,
statPOTSFSMsgCCWLength Counter32,
statPOTSFSMsgCCWRejectNoResource Counter32,
statPOTSFSMsgCCWRejectByCCW Counter32,
statPOTSFSMsgCHDAttempts Counter32,
statPOTSFSMsgCHDAnswered Counter32,
statPOTSFSMsgCHDNotAnswered Counter32,
statPOTSFSMsgCHDRejectNoResource Counter32,
statPOTSFSMsgCHDRejectInteractions Counter32,
statPOTSFSMsgMDCAttempts Counter32,
statPOTSFSMsgMDCRejectNoResource Counter32,
statPOTSFSMsgMDCRejectInteractions Counter32,
statPOTSFSMsgMDCRejectOthers Counter32,
statPOTSFSMsgCTAttempts Counter32,
statPOTSFSMsgCTAnswered Counter32,
statPOTSFSMsgCTTransferred Counter32,
statPOTSFSMsgCTConferenced Counter32,
statPOTSFSMsgCTFailed Counter32,
statPOTSFSMsgTWCAttempts Counter32,
statPOTSFSMsgTWCAnswered Counter32,
statPOTSFSMsgTWCConferenced Counter32,
statPOTSFSMsgTWCFailed Counter32,
statPOTSFSHotlineAttempts Counter32,
statPOTSFSWarmlineAttempts Counter32,
statPOTSFSMsgBLVAttempts Counter32,
statPOTSFSOprInterruptAttempts Counter32,
statPOTSFSMsgSCRAttempts Counter32,
statPOTSFSMsgSCAAttemps Counter32,
statPOTSFSMsgSCRRejectNoRsrcs Counter32,
statPOTSFSMsgSCARejectNoRsrcs Counter32,
statPOTSFSMsgSCRSucc Counter32,
statPOTSFSMsgSCASucc Counter32,
statPOTSFSMsgDRCWAttempts Counter32,
statPOTSFSMsgDRCWRejectNoRsrcs Counter32,
statPOTSFSMsgDRCWSucc Counter32,
statPOTSFSMsgSCFAttempts Counter32,
statPOTSFSMsgSCFRejectNoRsrcs Counter32,
statPOTSFSMsgSCFSucc Counter32,
statPOTSFSMsgCOTAccess Counter32,
statPOTSFSMsgCOTDenied Counter32,
statPOTSFSMsgCOTAct Counter32,
statPOTSFSMsgCOTAbandoned Counter32,
statPOTSFSMsgCOTDnUnavail Counter32,
statPOTSFSMsgCOTTraceConfirmed Counter32,
statPOTSFSMsgCOTTraceOutput Counter32,
statPOTSFSMsgRACFAttempts Counter32,
statPOTSFSMsgRACFRefused Counter32,
statPOTSFSMsgRACFRejectNoRsrcs Counter32,
statPOTSFSMsgRACFMsgCFUAct Counter32,
statPOTSFSMsgRACFMsgCFUDeact Counter32,
statPOTSFSMsgRACFMsgCFUUnchanged Counter32,
statPOTSFSMsgRACFPinAttempts Counter32,
statPOTSFSMsgRACFPinRefused Counter32,
statPOTSFSMsgRACFPinRejectNoRsrcs Counter32,
statPOTSFSMsgRACFPinChanged Counter32,
statPOTSFSMsgRACFPinUnchanged Counter32,
statPOTSFSMsgACActivationAttempts Counter32,
statPOTSFSMsgACOverflows Counter32,
statPOTSFSMsgACImmediateProcessing Counter32,
statPOTSFSMsgACDelayedProcessing Counter32,
statPOTSFSMsgACDeactivatedBySystem Counter32,
statPOTSFSMsgACDeactivationAttempts Counter32,
statPOTSFSMsgACInterlataAttempts Counter32,
statPOTSFSMsgARActivationAttempts Counter32,
statPOTSFSMsgAROverflows Counter32,
statPOTSFSMsgARImmediateProcessing Counter32,
statPOTSFSMsgARDelayedProcessing Counter32,
statPOTSFSMsgARDeactivatedBySys Counter32,
statPOTSFSMsgARDeactivationAttmp Counter32,
statPOTSFSMsgARInterlataAttempts Counter32,
statPOTSFSMsgACARTQueuedRequests Counter32,
statPOTSFSMsgACARTTermScanReqs Counter32,
statPOTSFSMsgACARTOrigScanReqs Counter32,
statPOTSFSMsgACARTRejectNoResrcs Counter32,
statPOTSFSCTXMsgSFGCounterOverflow Counter32,
statPOTSFSMsgACRActAttempts Counter32,
statPOTSFSMsgACRDeactAttempts Counter32,
statPOTSFSMsgACRActRejectNoRsrcs Counter32,
statPOTSFSMsgACRDeactRejectNoRsrcs Counter32,
statPOTSFSMsgACRSucc Counter32,
statPOTSFSMsgDNDActSucc Counter32,
statPOTSFSMsgDNDActFailed Counter32,
statPOTSFSMsgDNDDeactSucc Counter32,
statPOTSFSMsgDNDDeactFailed Counter32,
statPOTSFSMsgDNDReject Counter32,
statPOTSFSCTXMsgCParkSuccAttempts Counter32,
statPOTSFSCTXMsgCParkFailAttempts Counter32,
statPOTSFSCTXMsgCParkSuccRtrvAttempts Counter32,
statPOTSFSCTXMsgCParkFailRtrvAttempts Counter32,
statPOTSFSCTXMsgCParkFwded Counter32,
statPOTSFSCTXMsgCParkClred Counter32,
statPOTSFSCTXMsgSC1DgtAttempts Counter32,
statPOTSFSCTXMsgSC2DgtAttempts Counter32,
statPOTSFSCTXMsgSCSuccCCSCAttempts Counter32,
statPOTSFSMsgCNDBAttempts Counter32,
statPOTSFSMsgCNABAttempts Counter32,
statPOTSFSMsgCIDSAttempts Counter32,
statPOTSFSMsgCIDSSAttempts Counter32,
statPOTSFSSISMsgProvRSPRETRANRcv Counter32,
statPOTSFSSISMsgProvRSPRETRANXmit Counter32,
statPOTSFSSISMsgPRACKRcv Counter32,
statPOTSFSSISMsgPRACKXmit Counter32,
statPOTSFSSISMsgSUBSCRIBERcv Counter32,
statPOTSFSSISMsgSUBSCRIBEXmit Counter32,
statPOTSFSSISMsgREFERRcv Counter32,
statPOTSFSSISMsgREFERXmit Counter32,
statPOTSFSSISMsgINVITEREPLACESXmit Counter32,
statPOTSFSSISMsgINVITEREPLACESRcv Counter32,
statPOTSFSSISMsgREL100Rcv Counter32,
statPOTSFSSISMsgREL100Xmit Counter32,
statPOTSFSSISMsgUNSUPPORTEDRcv Counter32,
statPOTSFSMsgRCSucc Counter32,
statPOTSFSMsgCWDActSucc Counter32,
statPOTSFSMsgCWDDeactSucc Counter32,
statPOTSFSMsgCWDInterrogationSucc Counter32,
statPOTSFSMsgCWDActFail Counter32,
statPOTSFSMsgCWDDeactFail Counter32,
statPOTSFSMsgCWDInterrogationFail Counter32,
statPOTSFSMsgCWDAttempts Counter32,
statPOTSFSMsgCWDAnswered Counter32,
statPOTSFSMsgTWCDAttempts Counter32,
statPOTSFSMsgTWCDConferenced Counter32,
statPOTSFSMsgHOTVAttempts Counter32,
statPOTSFSMsgHOTVActSucc Counter32,
statPOTSFSMsgHOTVDeactSucc Counter32,
statPOTSFSMsgHOTVInterrogationSucc Counter32,
statPOTSFSMsgOCBLocalBlocked Counter32,
statPOTSFSMsgOCBNatlBlocked Counter32,
statPOTSFSMsgOCBIntlBlocked Counter32,
statPOTSFSMsgOCBInvocations Counter32,
statPOTSFSMsgOCBActSucc Counter32,
statPOTSFSMsgOCBDeactivSucc Counter32,
statPOTSFSMsgOCBInterrogationSucc Counter32,
statPOTSFSMsgOCBInvalidPasswd Counter32,
statPOTSFSMsgCFUInterrogationAttempts Counter32,
statPOTSFSMsgCFBInterrogationAttempts Counter32,
statPOTSFSMsgCFNAInterrogationAttempts Counter32,
statPOTSFSSISMsgUPDATERcv Counter32,
statPOTSFSSISMsgUPDATEXmit Counter32,
statPOTSFSSISMsgREFERWREPLACESRcv Counter32,
statPOTSFSREFERAttmp Counter32,
statPOTSFSREFERFail Counter32,
statPOTSFSREFERSucc Counter32,
statPOTSFSTotalCNAMQuery Counter32,
statPOTSFSExtCNAMQuery Counter32,
statPOTSFSExtCNAMQuerySucc Counter32,
statPOTSFSExtCNAMFailApp Counter32,
statPOTSFSExtCNAMFailNetw Counter32,
statPOTSFSAR2LevelACCCodeAttmp Counter32,
statPOTSFSAR2LevelACTCodeAttmp Counter32,
statPOTSFSMsgCFCActSucc Counter32,
statPOTSFSMsgCFCActFail Counter32,
statPOTSFSMsgCFCActAttmp Counter32,
statPOTSFSMsgCFCDnChgActSucc Counter32,
statPOTSFSMsgCFCDnChgActFail Counter32,
statPOTSFSMsgCFCDnChgActAttmp Counter32,
statPOTSFSMsgCFCDeactSucc Counter32,
statPOTSFSMsgCFCDeactFail Counter32,
statPOTSFSMsgCFCDeactAttmp Counter32,
statPOTSFSMsgCFCINTERROGSucc Counter32,
statPOTSFSMsgCFCINTERROGFail Counter32,
statPOTSFSMsgCFCINTERROGAttmp Counter32,
statPOTSFSMsgCFCFORWARDSucc Counter32,
statPOTSFSMsgCFCFORWARDFail Counter32,
statPOTSFSMsgCFCFORWARDAttmp Counter32,
statPOTSFSMsgNSAINVOKESucc Counter32,
statPOTSFSMsgNSAINVOKEFail Counter32,
statPOTSFSMsgNSAINVOKEAbandon Counter32,
statPOTSFSMsgPSSucc Counter32,
statPOTSFSMsgPSFail Counter32,
statPOTSFSMsgPSMANAGESucc Counter32,
statPOTSFSMsgPSMANAGEFail Counter32,
statPOTSFSMsgVMActSucc Counter32,
statPOTSFSMsgVMActFail Counter32,
statPOTSFSMsgVMDeactSucc Counter32,
statPOTSFSMsgVMDeactFail Counter32,
statPOTSFSMsgVMAccess Counter32,
statPOTSFSMsgVMAttmp Counter32,
statPOTSFSMsgLCDAUTHAttmp Counter32,
statPOTSFSMsgLCDAUTHSucc Counter32,
statPOTSFSMsgLCDAUTHFail Counter32,
statPOTSFSMsgLCDREAUTHFail Counter32,
statPOTSFSMsgLCDFORCEDDisc Counter32,
statPOTSFSMsgCOSTOLLFREEBlocked Counter32,
statPOTSFSMsgTDISCCALLSOUTGBlocked Counter32,
statPOTSFSMsgCOSTotAUTHIVRSession Counter32,
statPOTSFSMsgCOSTotACCTIVRSession Counter32,
statPOTSFSMsgCOSTotIVRFail Counter32,
statPOTSFSMsgMlsAttmp Counter32,
statPOTSFSMsgMlsSucc Counter32,
statPOTSFSMsgMlsRejectNoRsrc Counter32,
statPOTSFSMsgAsTermAttmp Counter32,
statPOTSFSMsgAsTermSucc Counter32,
statPOTSFSMsgAsTermFail Counter32,
statPOTSFSMsgAsOrigAttmp Counter32,
statPOTSFSMsgAsOrigSucc Counter32,
statPOTSFSMsgAsOrigFail Counter32,
statPOTSFSMsgAsOrigAbandon Counter32,
statPOTSFSMsgAsIvrDialplanAttmp Counter32,
statPOTSFSMsgAsIvrDialplanSucc Counter32,
statPOTSFSMsgAsTermAbandon Counter32,
statPOTSFSMsgAsVscAttmp Counter32,
statPOTSFSMsgAsVscSucc Counter32,
statPOTSFSMsgAsVscFail Counter32,
statPOTSFSMsgAsVscAbandon Counter32,
statPOTSFSMsgCfrForwardAttmp Counter32,
statPOTSFSMsgCfrForwardSucc Counter32,
statPOTSFSMsgCfrForwardFail Counter32,
statPOTSFSMsgCfnaRedirectSucc Counter32,
statPOTSFSMsgCfcRedirectSucc Counter32,
statPOTSFSMsgVmRedirectSucc Counter32,
statPOTSFSMsgOcDpReceived Counter32,
statPOTSSNRFindMeAttmp Counter32,
statPOTSSNRFindMeAnswered Counter32,
statPOTSSNRFindMeFail Counter32,
statPOTSSNRFindMeForkInvoke Counter32,
statPOTSSNRIvrRedirectVm Counter32,
statPOTSSNRIvrAccess Counter32,
statPOTSSNRIvrInvalidUidAttmp Counter32,
statPOTSSNRIvrInvalidPinAttmp Counter32,
statPOTSFSCFNRSuccActiv Counter32,
statPOTSFSCFNRSuccInvoc Counter32,
statPOTSFSCFNRSuccDectiv Counter32,
statPOTSFSCFNRSuccInterrog Counter32,
statPOTSFSCFNRUnsuccActiv Counter32,
statPOTSFSCFNRUnsuccInvoc Counter32,
statPOTSFSCFNRUnsuccDectiv Counter32,
statPOTSFSCFNRUnsuccInterrog Counter32,
statPOTSFSACARTOptionalQueryReq Counter32,
statPOTSSecondExtCNAMQuery Counter32,
statPOTSSecondExtCNAMQuerySuc Counter32,
statPOTSSecondExtCNAMFailApp Counter32,
statPOTSSecondExtCNAMFailNetw Counter32
}
statPOTSFSComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"POTSFS Feature Server Identifier"
::= { statPOTSFSEntry 1 }
statPOTSFSDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statPOTSFSEntry 2 }
statPOTSFSTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statPOTSFSEntry 3 }
statPOTSFSSISInMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server attempted to receive"
::= { statPOTSFSEntry 4 }
statPOTSFSSISInMsgRcvSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server successfully received"
::= { statPOTSFSEntry 5 }
statPOTSFSSISOutMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server attempted to send"
::= { statPOTSFSEntry 6 }
statPOTSFSSISOutMsgRcvSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server successfully sent"
::= { statPOTSFSEntry 7 }
statPOTSFSSISMsgREQRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP request retransmission messages the
reporting call agent or feature server received"
::= { statPOTSFSEntry 8 }
statPOTSFSSISMsgREQRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP request retransmission messages the
reporting call agent or feature server sent"
::= { statPOTSFSEntry 9 }
statPOTSFSSISMsgRSPRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP response retransmission messages the
reporting call agent or feature server received"
::= { statPOTSFSEntry 10 }
statPOTSFSSISMsgRSPRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP response retransmission messages the
reporting call agent or feature server received"
::= { statPOTSFSEntry 11 }
statPOTSFSSIST1TimerExpired OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP T1 Timer expirations that occurred on the
reporting call agent or feature server received over the
collection interval"
::= { statPOTSFSEntry 12 }
statPOTSFSSIST2TimerReached OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP T2 Timer expirations that occurred on the
reporting call agent or feature server received over the
collection interval"
::= { statPOTSFSEntry 13 }
statPOTSFSSISMsgINVITERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent
or feature server received"
::= { statPOTSFSEntry 14 }
statPOTSFSSISMsgINVITEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 15 }
statPOTSFSSISMsgCANCELRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent
or feature server received"
::= { statPOTSFSEntry 18 }
statPOTSFSSISMsgCANCELXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 19 }
statPOTSFSSISMsgBYERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP BYE messages the reporting call agent
or feature server received"
::= { statPOTSFSEntry 20 }
statPOTSFSSISMsgBYEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP BYE messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 21 }
statPOTSFSSISMsgACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP ACK messages the reporting call agent
or feature server received"
::= { statPOTSFSEntry 22 }
statPOTSFSSISMsgACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP ACK messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 23 }
statPOTSFSSISMsgOPTIONRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent
or feature server received"
::= { statPOTSFSEntry 24 }
statPOTSFSSISMsgOPTIONXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 25 }
statPOTSFSSISMsgREGISTERRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent
or feature server received"
::= { statPOTSFSEntry 26 }
statPOTSFSSISMsgREGISTERXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 27 }
statPOTSFSSISMsgINFORcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INFO messages the reporting call agent
or feature server received"
::= { statPOTSFSEntry 28 }
statPOTSFSSISMsgINFOXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INFO messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 29 }
statPOTSFSSISMsgNotifyRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent
or feature server received"
::= { statPOTSFSEntry 30 }
statPOTSFSSISMsgNotifyXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 31 }
statPOTSFSSIS100Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting call
agent or feature server received"
::= { statPOTSFSEntry 32 }
statPOTSFSSIS100Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting call
agent or feature server sent"
::= { statPOTSFSEntry 33 }
statPOTSFSSIS18xRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the
reporting call agent or feature server received"
::= { statPOTSFSEntry 34 }
statPOTSFSSIS18xXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the
reporting call agent or feature server sent"
::= { statPOTSFSEntry 35 }
statPOTSFSSIS200Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting
call agent or feature server received"
::= { statPOTSFSEntry 36 }
statPOTSFSSIS200Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting
call agent or feature server sent"
::= { statPOTSFSEntry 37 }
statPOTSFSSIS3xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting
call agent or feature server received"
::= { statPOTSFSEntry 38 }
statPOTSFSSIS3xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting
call agent or feature server sent"
::= { statPOTSFSEntry 39 }
statPOTSFSSIS4xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the
reporting call agent or feature server received"
::= { statPOTSFSEntry 40 }
statPOTSFSSIS4xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the
reporting call agent or feature server sent"
::= { statPOTSFSEntry 41 }
statPOTSFSSIS5xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the
reporting call agent or feature server received"
::= { statPOTSFSEntry 42 }
statPOTSFSSIS5xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the
reporting call agent or feature server sent"
::= { statPOTSFSEntry 43 }
statPOTSFSSIS6xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the
reporting call agent or feature server received"
::= { statPOTSFSEntry 44 }
statPOTSFSSIS6xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the
reporting call agent or feature server sent"
::= { statPOTSFSEntry 45 }
statPOTSFSSIS7xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting
call agent or feature server received"
::= { statPOTSFSEntry 46 }
statPOTSFSSIS7xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting
call agent or feature server sent"
::= { statPOTSFSEntry 47 }
statPOTSFSANIScreeningSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Number Identification directory
number lookups that were successfully attempted on the
reporting feature serverANI attempt is succesful when ANI DN
is available on the reporting FS, and ANI status is allowed as
per provisioning. (In the case of casual calls, ALL ANI
attempts are successful if the Casual Code is valid and
allowed on reporting feature server)"
::= { statPOTSFSEntry 48 }
statPOTSFSANIScreeningBlocked OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls that were blocked based on Automatic
Number Identification directory number lookups on the
reporting feature server(In the case of Casual calls, ANI
does also get blocked if Casual Codes are invalid)."
::= { statPOTSFSEntry 49 }
statPOTSFSCallsBlockedNANPBW OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of NANP based calls that were blocked due to a
match on a black list or an exclusion from a white list on
the reporting feature server"
::= { statPOTSFSEntry 50 }
statPOTSFSCallsBlockedIntlBW OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of International based calls that were blocked
due to a match on a black list or an exclusion from a white
list on the reporting feature server"
::= { statPOTSFSEntry 51 }
statPOTSFSCallsBlocked900Rest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls denied due to subscriber based 900
restrictions on the reporting feature server"
::= { statPOTSFSEntry 52 }
statPOTSFSCallsBlocked976Rest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls denied due to subscriber based 976
restrictions on the reporting feature server"
::= { statPOTSFSEntry 53 }
statPOTSFSCallsBlockedNANPRest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls denied due to subscriber based 976
restrictions on the reporting feature server"
::= { statPOTSFSEntry 54 }
statPOTSFSCallsBlockedIntlRest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Not currently used."
::= { statPOTSFSEntry 55 }
statPOTSFSCallsBlockedCasualRest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls denied due to subscriber based casual
dialing restrictions on the reporting feature server"
::= { statPOTSFSEntry 56 }
statPOTSFSCallsBlockedDARest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls denied due to subscriber based directory
assistance restrictions on the reporting feature server"
::= { statPOTSFSEntry 57 }
statPOTSFSCallsBlockedNANPOperRest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls denied due to subscriber based NANP
operator restrictions on the reporting feature server"
::= { statPOTSFSEntry 58 }
statPOTSFSCallsBlockedIntlOperRest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls denied due to subscriber based
international operator restrictions on the reporting feature
server"
::= { statPOTSFSEntry 59 }
statPOTSFSAuthCodeSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful authentication code validations on
the reporting feature server"
::= { statPOTSFSEntry 60 }
statPOTSFSAuthCodeFailure OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful authentication code validations on
the reporting feature server"
::= { statPOTSFSEntry 61 }
statPOTSFSAccountCodeSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful account code validations on the
reporting feature server(account codes do not get
validated - any dialed account code entered by the user is
considered valid - including an empty account code.)"
::= { statPOTSFSEntry 62 }
statPOTSFSAccountCodeFailure OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Not currently used."
::= { statPOTSFSEntry 63 }
statPOTSFSMsgCFUActAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Unconditional activation attempts
on the reporting feature server"
::= { statPOTSFSEntry 64 }
statPOTSFSMsgCFUDeactAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Unconditional deactivation
attempts on the reporting feature server"
::= { statPOTSFSEntry 65 }
statPOTSFSMsgCFUActRefusals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Unconditional activation attempts
refused on the reporting feature server"
::= { statPOTSFSEntry 66 }
statPOTSFSMsgCFUActAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Unconditional activation attempts
answered by the called party on the reporting feature server"
::= { statPOTSFSEntry 67 }
statPOTSFSMsgCFUActSecond OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Unconditional second activation
attempts on the reporting feature server"
::= { statPOTSFSEntry 68 }
statPOTSFSMsgCFUForwardFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Unconditional service instances
that failed on the reporting feature server"
::= { statPOTSFSEntry 69 }
statPOTSFSMsgCFUForwardSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Unconditional service instances
that succeeded on the reporting feature server"
::= { statPOTSFSEntry 70 }
statPOTSFSMsgCFBActAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Busy activation attempts on the
reporting feature server"
::= { statPOTSFSEntry 71 }
statPOTSFSMsgCFBDeactAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Busy deactivation attempts on the
reporting feature server"
::= { statPOTSFSEntry 72 }
statPOTSFSMsgCFBActRefusals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Busy activation attempts refused
on the reporting feature server"
::= { statPOTSFSEntry 73 }
statPOTSFSMsgCFBForwardFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Busy service instances that
failed on the reporting feature server"
::= { statPOTSFSEntry 74 }
statPOTSFSMsgCFBForwardSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Busy service instances that
succeeded on the reporting feature server"
::= { statPOTSFSEntry 75 }
statPOTSFSMsgCFNAActAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward No Answer activation attempts on
the reporting feature server"
::= { statPOTSFSEntry 76 }
statPOTSFSMsgCFNADeactAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward No Answer deactivation attempts
on the reporting feature server"
::= { statPOTSFSEntry 77 }
statPOTSFSMsgCFNAActRefusals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward No Answer activation attempts
refused on the reporting feature server"
::= { statPOTSFSEntry 78 }
statPOTSFSMsgCFNAForwardFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward No Answer service instances that
failed on the reporting feature server"
::= { statPOTSFSEntry 79 }
statPOTSFSMsgCFNAForwardSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward No Answer service instances that
succeeded on the reporting feature server"
::= { statPOTSFSEntry 80 }
statPOTSFSMsgCWAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting service instance attempts on the
reporting feature server"
::= { statPOTSFSEntry 81 }
statPOTSFSMsgCWAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting service instance attempts answered
by the called party on the reporting feature server"
::= { statPOTSFSEntry 82 }
statPOTSFSMsgCWNotAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting service instance attempts not
answered by the called party on the reporting feature server"
::= { statPOTSFSEntry 83 }
statPOTSFSMsgCWRejectNoResource OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting service instance attempts that
were rejected due to a lack of available resources on the
reporting feature server"
::= { statPOTSFSEntry 84 }
statPOTSFSMsgCWRejectInteraction OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting service instance attempts that
were rejected due to feature interactions on the reporting
feature server"
::= { statPOTSFSEntry 85 }
statPOTSFSMsgCCWAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Cancel Call Waiting attempts on the reporting
feature server"
::= { statPOTSFSEntry 86 }
statPOTSFSMsgCCWLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total time in subscriber-seconds that Cancel Call
WAITING was active on the reporting feature server"
::= { statPOTSFSEntry 87 }
statPOTSFSMsgCCWRejectNoResource OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Cancel Call Waiting attempts that were rejected
due to a lack of available resources on the reporting feature
server"
::= { statPOTSFSEntry 88 }
statPOTSFSMsgCCWRejectByCCW OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Cancel Call Waiting attempts that were
rejected due to Call Waiting not already being active on the
reporting feature server"
::= { statPOTSFSEntry 89 }
statPOTSFSMsgCHDAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Hold service instance attempts on the
reporting feature server"
::= { statPOTSFSEntry 90 }
statPOTSFSMsgCHDAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Hold service instance attempts resulting
in reconnection on the reporting feature server"
::= { statPOTSFSEntry 91 }
statPOTSFSMsgCHDNotAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Hold service instance attempts that were
not reconnected on the reporting feature server"
::= { statPOTSFSEntry 92 }
statPOTSFSMsgCHDRejectNoResource OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Hold service instance attempts that were
rejected due to a lack of available resources on the reporting
feature server"
::= { statPOTSFSEntry 93 }
statPOTSFSMsgCHDRejectInteractions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Hold service instance attempts that were
rejected due to feature interactions on the reporting feature
server"
::= { statPOTSFSEntry 94 }
statPOTSFSMsgMDCAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Mid Call Trigger attempts made by subscribers
on the reporting feature server"
::= { statPOTSFSEntry 95 }
statPOTSFSMsgMDCRejectNoResource OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Mid Call Trigger attempts made by subscribers
that were rejected due to a lack of available resources on
the reporting feature server"
::= { statPOTSFSEntry 96 }
statPOTSFSMsgMDCRejectInteractions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Mid Call Trigger attempts made by subscribers
that were rejected due to feature interactions on the
reporting feature server"
::= { statPOTSFSEntry 97 }
statPOTSFSMsgMDCRejectOthers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Mid Call Trigger attempts made by subscribers
that were rejected due to unknown reasons on the reporting
feature server"
::= { statPOTSFSEntry 98 }
statPOTSFSMsgCTAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Mid Call Trigger attempts made by subscribers
that were rejected due to unknown reasons on the reporting
feature server"
::= { statPOTSFSEntry 99 }
statPOTSFSMsgCTAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Transfer service instance attempts
answered by the called party on the reporting feature server"
::= { statPOTSFSEntry 100 }
statPOTSFSMsgCTTransferred OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Transfer service instance attempts
resulting in a successfully transferred call on the reporting
feature server"
::= { statPOTSFSEntry 101 }
statPOTSFSMsgCTConferenced OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Transfer service instance attempts
resulting in a successfully setup conference call on the
reporting feature server"
::= { statPOTSFSEntry 102 }
statPOTSFSMsgCTFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Transfer service instance attempts that
failed on the reporting feature server"
::= { statPOTSFSEntry 103 }
statPOTSFSMsgTWCAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Three Way Call service instance attempts on the
reporting feature server"
::= { statPOTSFSEntry 104 }
statPOTSFSMsgTWCAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Three Way Call service instance attempts
answered by the called party on the reporting feature server"
::= { statPOTSFSEntry 105 }
statPOTSFSMsgTWCConferenced OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Three Way Call service instance attempts
resulting in a successfully setup conference call on the
reporting feature server"
::= { statPOTSFSEntry 106 }
statPOTSFSMsgTWCFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Three Way Call service instance attempts that
failed on the reporting feature server"
::= { statPOTSFSEntry 107 }
statPOTSFSHotlineAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Hotline service instance attempts on the
reporting feature server"
::= { statPOTSFSEntry 108 }
statPOTSFSWarmlineAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Warmline service instance attempts on the
reporting feature server"
::= { statPOTSFSEntry 109 }
statPOTSFSMsgBLVAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Busy Line Verification service instance
attempts on the reporting feature server"
::= { statPOTSFSEntry 110 }
statPOTSFSOprInterruptAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Operator Interrupt service instance attempts
on the reporting feature server"
::= { statPOTSFSEntry 111 }
statPOTSFSMsgSCRAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Selective Call Rejection service instance
attempts on the reporting feature server"
::= { statPOTSFSEntry 112 }
statPOTSFSMsgSCAAttemps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Selective Call Acceptance service instance
attempts on the reporting feature server"
::= { statPOTSFSEntry 113 }
statPOTSFSMsgSCRRejectNoRsrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Selective Call Rejection attempts made by
subscribers that were rejected due to a lack of available
resources on the reporting feature server"
::= { statPOTSFSEntry 114 }
statPOTSFSMsgSCARejectNoRsrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Selective Call Acceptance attempts made by
subscribers that were rejected due to a lack of available
resources on the reporting feature server"
::= { statPOTSFSEntry 115 }
statPOTSFSMsgSCRSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Selective Call Rejection service instance
attempts resulting in successful rejections of the call on the
reporting feature server"
::= { statPOTSFSEntry 116 }
statPOTSFSMsgSCASucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Selective Call Acceptance service instance
attempts resulting in successful acceptance of the call on
the reporting feature server"
::= { statPOTSFSEntry 117 }
statPOTSFSMsgDRCWAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Distinctive Ring Call Waiting service instance
attempts on the reporting feature server"
::= { statPOTSFSEntry 118 }
statPOTSFSMsgDRCWRejectNoRsrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Distinctive Ring Call Waiting attempts that
were rejected due to a lack of available resources on the
reporting feature server"
::= { statPOTSFSEntry 119 }
statPOTSFSMsgDRCWSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Distinctive Ring Call Waiting attempts that
were successful on the reporting feature server"
::= { statPOTSFSEntry 120 }
statPOTSFSMsgSCFAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Selective Call Forwarding service instance
attempts on the reporting feature server"
::= { statPOTSFSEntry 121 }
statPOTSFSMsgSCFRejectNoRsrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Selective Call Forwarding attempts that were
rejected due to a lack of available resources on the
reporting feature server"
::= { statPOTSFSEntry 122 }
statPOTSFSMsgSCFSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Selective Call Forwarding attempts that were
successful on the reporting feature server"
::= { statPOTSFSEntry 123 }
statPOTSFSMsgCOTAccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the Caller Originated Trace star code was
dialed by the subscriber (feature accesses and activations)"
::= { statPOTSFSEntry 124 }
statPOTSFSMsgCOTDenied OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the Caller Originated Trace data was
unsuccessfully accessed on the reporting feature server"
::= { statPOTSFSEntry 125 }
statPOTSFSMsgCOTAct OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Same as POTS_COT_ACCESS in this release. When 2-level
COT (the digit -1- dialed) is available - this counter would
include both those and the current 1-level activations tracked
in POTS_COT_ACCESS."
::= { statPOTSFSEntry 126 }
statPOTSFSMsgCOTAbandoned OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Caller Originated Trace service activation
abandonments that occurred on the reporting feature server"
::= { statPOTSFSEntry 127 }
statPOTSFSMsgCOTDnUnavail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Caller Originated Trace service activation that
failed due to the calling party directory number not be
available on the reporting feature server"
::= { statPOTSFSEntry 128 }
statPOTSFSMsgCOTTraceConfirmed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Caller Originated Trace service instances that
were successfully completed on the reporting feature server"
::= { statPOTSFSEntry 129 }
statPOTSFSMsgCOTTraceOutput OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Caller Originated Trace service instances that
were successfully completed and the data was stored
persistently on the reporting feature server"
::= { statPOTSFSEntry 130 }
statPOTSFSMsgRACFAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward attempts on the
reporting feature server"
::= { statPOTSFSEntry 131 }
statPOTSFSMsgRACFRefused OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward service
instances refused by the reporting feature server"
::= { statPOTSFSEntry 132 }
statPOTSFSMsgRACFRejectNoRsrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward service
instances refused due to a lack of available resources on
the reporting feature server"
::= { statPOTSFSEntry 133 }
statPOTSFSMsgRACFMsgCFUAct OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward activation
attempts that were successful on the reporting feature server"
::= { statPOTSFSEntry 134 }
statPOTSFSMsgRACFMsgCFUDeact OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward deactivation
attempts that were successful on the reporting feature server"
::= { statPOTSFSEntry 135 }
statPOTSFSMsgRACFMsgCFUUnchanged OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward service
instances that were successful but resulted in no change to
the forwarding-to number on the reporting feature server"
::= { statPOTSFSEntry 136 }
statPOTSFSMsgRACFPinAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward PIN input
attempts on the reporting feature server"
::= { statPOTSFSEntry 137 }
statPOTSFSMsgRACFPinRefused OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward PIN input
attempts that were refused on the reporting feature server"
::= { statPOTSFSEntry 138 }
statPOTSFSMsgRACFPinRejectNoRsrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward PIN input
attempts that were refused due to a lack of resources on the
reporting feature server"
::= { statPOTSFSEntry 139 }
statPOTSFSMsgRACFPinChanged OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward PIN input
attempts that resulted in a change to the previous PIN for
that subscriber on the reporting feature server"
::= { statPOTSFSEntry 140 }
statPOTSFSMsgRACFPinUnchanged OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Remote Activation Call Forward PIN input
attempts that resulted in no change to the previous PIN for
that subscriber on the reporting feature server"
::= { statPOTSFSEntry 141 }
statPOTSFSMsgACActivationAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback service activation attempts
on the reporting feature server"
::= { statPOTSFSEntry 142 }
statPOTSFSMsgACOverflows OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback service activation attempts
resulting in an overflow on the reporting feature server"
::= { statPOTSFSEntry 143 }
statPOTSFSMsgACImmediateProcessing OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback service activation attempts
that resulted in immediate connection on the reporting
feature server"
::= { statPOTSFSEntry 144 }
statPOTSFSMsgACDelayedProcessing OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback service activation attempts
that resulted in delayed connection on the reporting
feature server"
::= { statPOTSFSEntry 145 }
statPOTSFSMsgACDeactivatedBySystem OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback service activation attempts
that were deactivated by the system on the reporting
feature server"
::= { statPOTSFSEntry 146 }
statPOTSFSMsgACDeactivationAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback service activation attempts
that were deactivated by the requesting subscriber on the
reporting feature server"
::= { statPOTSFSEntry 147 }
statPOTSFSMsgACInterlataAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback service activation attempts
performed on an interlata basis on the reporting feature server"
::= { statPOTSFSEntry 148 }
statPOTSFSMsgARActivationAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Recall service activation attempts
on the reporting feature server"
::= { statPOTSFSEntry 149 }
statPOTSFSMsgAROverflows OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Recall service activation attempts
resulting in an overflow on the reporting feature server"
::= { statPOTSFSEntry 150 }
statPOTSFSMsgARImmediateProcessing OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Recall service activation attempts
that resulted in immediate connection on the reporting
feature server"
::= { statPOTSFSEntry 151 }
statPOTSFSMsgARDelayedProcessing OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Recall service activation attempts
that resulted in delayed connection on the reporting feature
server"
::= { statPOTSFSEntry 152 }
statPOTSFSMsgARDeactivatedBySys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Recall service activation attempts
that were deactivated by the system on the reporting feature
server"
::= { statPOTSFSEntry 153 }
statPOTSFSMsgARDeactivationAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Recall service activation attempts
that were deactivated by the requesting subscriber on the
reporting feature server"
::= { statPOTSFSEntry 154 }
statPOTSFSMsgARInterlataAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Recall service activation attempts
performed on an interlata basis on the reporting feature server"
::= { statPOTSFSEntry 155 }
statPOTSFSMsgACARTQueuedRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback and Automatic Recall service
requests that were queued on the reporting feature server"
::= { statPOTSFSEntry 156 }
statPOTSFSMsgACARTTermScanReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback and Automatic Recall service
requests that were queued for terminators on the reporting
feature server"
::= { statPOTSFSEntry 157 }
statPOTSFSMsgACARTOrigScanReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback and Automatic Recall service
requests that were queued for originators on the reporting
feature server"
::= { statPOTSFSEntry 158 }
statPOTSFSMsgACARTRejectNoResrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Callback and Automatic Recall service
requests that were rejected due to a lack of resources on the
reporting feature server"
::= { statPOTSFSEntry 159 }
statPOTSFSCTXMsgSFGCounterOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Centrex SFG counters that overflowed during the
collection interval on the reporting feature server"
::= { statPOTSFSEntry 160 }
statPOTSFSMsgACRActAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Call Return activation attempts
during the collection interval"
::= { statPOTSFSEntry 161 }
statPOTSFSMsgACRDeactAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Call Return deactivation attempts
during the collection interval"
::= { statPOTSFSEntry 162 }
statPOTSFSMsgACRActRejectNoRsrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Call Return activation attempts that
failed due to a lack of resources during the collection
interval"
::= { statPOTSFSEntry 163 }
statPOTSFSMsgACRDeactRejectNoRsrcs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Call Return deactivation attempts
during the collection interval"
::= { statPOTSFSEntry 164 }
statPOTSFSMsgACRSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Automatic Call Return attempts that were
successful during the collection interval"
::= { statPOTSFSEntry 165 }
statPOTSFSMsgDNDActSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
::= { statPOTSFSEntry 166 }
statPOTSFSMsgDNDActFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
::= { statPOTSFSEntry 167 }
statPOTSFSMsgDNDDeactSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
::= { statPOTSFSEntry 168 }
statPOTSFSMsgDNDDeactFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
::= { statPOTSFSEntry 169 }
statPOTSFSMsgDNDReject OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
::= { statPOTSFSEntry 170 }
statPOTSFSCTXMsgCParkSuccAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Park Attempts that were successful during
the collection interval"
::= { statPOTSFSEntry 171 }
statPOTSFSCTXMsgCParkFailAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Park Attempts that failed during the
collection interval"
::= { statPOTSFSEntry 172 }
statPOTSFSCTXMsgCParkSuccRtrvAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Park Retrieval Attempts that were
successful during the collection interval"
::= { statPOTSFSEntry 173 }
statPOTSFSCTXMsgCParkFailRtrvAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Park Retrieval Attempts that failed during
the collection interval"
::= { statPOTSFSEntry 174 }
statPOTSFSCTXMsgCParkFwded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Park Attempts to forward a call during the
collection interval"
::= { statPOTSFSEntry 175 }
statPOTSFSCTXMsgCParkClred OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Park Attempts to clear during the
collection interval"
::= { statPOTSFSEntry 176 }
statPOTSFSCTXMsgSC1DgtAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Speed Call 1 digit attempts during the
collection interval"
::= { statPOTSFSEntry 177 }
statPOTSFSCTXMsgSC2DgtAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Speed Call 2 digit attempts during the
collection interval"
::= { statPOTSFSEntry 178 }
statPOTSFSCTXMsgSCSuccCCSCAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CCSC successful attempts during the collection
interval"
::= { statPOTSFSEntry 179 }
statPOTSFSMsgCNDBAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
-- "Number of times Calling Number Delivery Block feature was
-- actived"
::= { statPOTSFSEntry 180 }
statPOTSFSMsgCNABAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
-- "Number of times Calling Name Block feature was activated"
::= { statPOTSFSEntry 181 }
statPOTSFSMsgCIDSAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
-- "Number times Calling Identity Delivery feature as activated"
::= { statPOTSFSEntry 182 }
statPOTSFSMsgCIDSSAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
-- "Number of times Calling Identity Delivery Suppression
-- feature was activated"
::= { statPOTSFSEntry 183 }
statPOTSFSSISMsgProvRSPRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP provisioning response retransmission
messages the reporting call agent or feature server received"
::= { statPOTSFSEntry 184 }
statPOTSFSSISMsgProvRSPRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP provisioning response retransmission
messages the reporting call agent or feature server sent"
::= { statPOTSFSEntry 185 }
statPOTSFSSISMsgPRACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent or
feature server received"
::= { statPOTSFSEntry 186 }
statPOTSFSSISMsgPRACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 187 }
statPOTSFSSISMsgSUBSCRIBERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call
agent or feature server received"
::= { statPOTSFSEntry 188 }
statPOTSFSSISMsgSUBSCRIBEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call
agent or feature server sent"
::= { statPOTSFSEntry 189 }
statPOTSFSSISMsgREFERRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER messages the reporting call agent or
feature server received"
::= { statPOTSFSEntry 190 }
statPOTSFSSISMsgREFERXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER messages the reporting call agent or
feature server sent"
::= { statPOTSFSEntry 191 }
statPOTSFSSISMsgINVITEREPLACESXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting call
agent or feature server sent"
::= { statPOTSFSEntry 193 }
statPOTSFSSISMsgINVITEREPLACESRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting call
agent or feature server received"
::= { statPOTSFSEntry 194 }
statPOTSFSSISMsgREL100Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting
call agent or feature server received"
::= { statPOTSFSEntry 195 }
statPOTSFSSISMsgREL100Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting
call agent or feature server sent"
::= { statPOTSFSEntry 196 }
statPOTSFSSISMsgUNSUPPORTEDRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsupported SIP messages the reporting call
agent or feature server received"
::= { statPOTSFSEntry 197 }
statPOTSFSMsgRCSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Return Call attempts that were successful
during the collection interval"
::= { statPOTSFSEntry 198 }
statPOTSFSMsgCWDActSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting Deluxe successful service
activation attempts on the reporting feature server"
::= { statPOTSFSEntry 199 }
statPOTSFSMsgCWDDeactSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting Deluxe successful service
deactivation attempts on the reporting feature server"
::= { statPOTSFSEntry 200 }
statPOTSFSMsgCWDInterrogationSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting Deluxe successful service
interrogation attempts on the reporting feature server"
::= { statPOTSFSEntry 201 }
statPOTSFSMsgCWDActFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting Deluxe unsuccessful service
activation attempts on the reporting feature server"
::= { statPOTSFSEntry 202 }
statPOTSFSMsgCWDDeactFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting Deluxe unsuccessful service
deactivation attempts on the reporting feature server"
::= { statPOTSFSEntry 203 }
statPOTSFSMsgCWDInterrogationFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting Deluxe unsuccessful service
interrogation attempts on the reporting feature server"
::= { statPOTSFSEntry 204 }
statPOTSFSMsgCWDAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting Deluxe service instance attempts
on the reporting feature server"
::= { statPOTSFSEntry 205 }
statPOTSFSMsgCWDAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Waiting Deluxe service instance attempts
answered by the called party on the reporting feature server"
::= { statPOTSFSEntry 206 }
statPOTSFSMsgTWCDAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Three Way Calling Deluxe service instance
attempts on the reporting feature server"
::= { statPOTSFSEntry 207 }
statPOTSFSMsgTWCDConferenced OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Three Way Calling Deluxe service instance
conferencing attempts on the reporting feature server"
::= { statPOTSFSEntry 208 }
statPOTSFSMsgHOTVAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Hotline Variable instance attempts
on the reporting feature server"
::= { statPOTSFSEntry 209 }
statPOTSFSMsgHOTVActSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Hotline Variable instance attempts
on the reporting feature server"
::= { statPOTSFSEntry 210 }
statPOTSFSMsgHOTVDeactSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Hotline Variable deactivation
attempts on the reporting feature server"
::= { statPOTSFSEntry 211 }
statPOTSFSMsgHOTVInterrogationSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Hotline Variable deactivation
attempts on the reporting feature server"
::= { statPOTSFSEntry 212 }
statPOTSFSMsgOCBLocalBlocked OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of local calls that were blocked on the reporting
feature server via Outward Call Barring"
::= { statPOTSFSEntry 213 }
statPOTSFSMsgOCBNatlBlocked OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of national calls that were blocked on the
reporting feature server via Outward Call Barring"
::= { statPOTSFSEntry 214 }
statPOTSFSMsgOCBIntlBlocked OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of international calls that were blocked on the
reporting feature server via Outward Call Barring"
::= { statPOTSFSEntry 215 }
statPOTSFSMsgOCBInvocations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Outward Call Barring invocation attempts on the
reporting feature server"
::= { statPOTSFSEntry 216 }
statPOTSFSMsgOCBActSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Outward Call Barring invocation attempts on
the reporting feature server"
::= { statPOTSFSEntry 217 }
statPOTSFSMsgOCBDeactivSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Outward Call Barring successful deactivation
attempts on the reporting feature server"
::= { statPOTSFSEntry 218 }
statPOTSFSMsgOCBInterrogationSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Outward Call Barring successful interrogation
attempts on the reporting feature server"
::= { statPOTSFSEntry 219 }
statPOTSFSMsgOCBInvalidPasswd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Outward Call Barring attempts that were
unsuccessful due to invalid password entry by the user on
the reporting feature server"
::= { statPOTSFSEntry 220 }
statPOTSFSMsgCFUInterrogationAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Unconditional interrogation
attempts on the reporting feature server"
::= { statPOTSFSEntry 221 }
statPOTSFSMsgCFBInterrogationAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward Busy interrogation attempts on
the reporting feature server"
::= { statPOTSFSEntry 222 }
statPOTSFSMsgCFNAInterrogationAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Call Forward No Answer interrogation attempts
on the reporting feature server"
::= { statPOTSFSEntry 223 }
statPOTSFSSISMsgUPDATERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP UPDATE messages the reporting call agent
or feature server received"
::= { statPOTSFSEntry 224 }
statPOTSFSSISMsgUPDATEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP UPDATE messages the reporting call agent
or feature server sent"
::= { statPOTSFSEntry 225 }
statPOTSFSSISMsgREFERWREPLACESRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER with REPLACES messages the reporting call agent or feature server received"
::= { statPOTSFSEntry 226 }
statPOTSFSREFERAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REFER attempts made on the reporting feature server"
::= { statPOTSFSEntry 230 }
statPOTSFSREFERFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REFER failed attempts made on the reporting feature server"
::= { statPOTSFSEntry 231 }
statPOTSFSREFERSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REFER successful attempts made on the reporting feature server"
::= { statPOTSFSEntry 232 }
statPOTSFSTotalCNAMQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CNAM translation queries attempted on the reporting feature server"
::= { statPOTSFSEntry 233 }
statPOTSFSExtCNAMQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CNAM translation queries that resulted in an external query to a network database attempted on the reporting feature server"
::= { statPOTSFSEntry 234 }
statPOTSFSExtCNAMQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CNAM translation queries that resulted in a successful external query to a network database attempted on the reporting feature server"
::= { statPOTSFSEntry 235 }
statPOTSFSExtCNAMFailApp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CNAM translation queries that resulted in a failed external query to a network database due to an application failure from the reporting feature server"
::= { statPOTSFSEntry 236 }
statPOTSFSExtCNAMFailNetw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CNAM translation queries that resulted in a failed external query to a network communication failure from the reporting feature server"
::= { statPOTSFSEntry 237 }
statPOTSFSAR2LevelACCCodeAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the access code (1) is dialed for the two level Automatic Recall activation procedure on the reporting feature server"
::= { statPOTSFSEntry 238 }
statPOTSFSAR2LevelACTCodeAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the activation code (*69) is dialed for the two level Automatic Recall activation procedure on the reporting feature server"
::= { statPOTSFSEntry 239 }
statPOTSFSMsgCFCActSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Call Forward Combination activation attempts on the reporting feature server"
::= { statPOTSFSEntry 240 }
statPOTSFSMsgCFCActFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful Call Forward Combination activation attempts on the reporting feature server"
::= { statPOTSFSEntry 241 }
statPOTSFSMsgCFCActAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total Call Forward Combination activation attempts on the reporting feature server"
::= { statPOTSFSEntry 242 }
statPOTSFSMsgCFCDnChgActSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Call Forward Combination directory number change activation attempts on the reporting feature server"
::= { statPOTSFSEntry 243 }
statPOTSFSMsgCFCDnChgActFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful Call Forward Combination directory number change activation attempts on the reporting feature server"
::= { statPOTSFSEntry 244 }
statPOTSFSMsgCFCDnChgActAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total Call Forward Combination directory number change activation attempts on the reporting feature server"
::= { statPOTSFSEntry 245 }
statPOTSFSMsgCFCDeactSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Call Forward Combination deactivation attempts on the reporting feature server"
::= { statPOTSFSEntry 246 }
statPOTSFSMsgCFCDeactFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful Call Forward Combination deactivation attempts on the reporting feature server"
::= { statPOTSFSEntry 247 }
statPOTSFSMsgCFCDeactAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total Call Forward Combination deactivation attempts on the reporting feature server"
::= { statPOTSFSEntry 248 }
statPOTSFSMsgCFCINTERROGSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Call Forward Combination interrogation attempts on the reporting feature server"
::= { statPOTSFSEntry 249 }
statPOTSFSMsgCFCINTERROGFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful Call Forward Combination interrogation attempts on the reporting feature server"
::= { statPOTSFSEntry 250 }
statPOTSFSMsgCFCINTERROGAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total Call Forward Combination interrogation attempts on the reporting feature server"
::= { statPOTSFSEntry 251 }
statPOTSFSMsgCFCFORWARDSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Call Forward Combination forwarding attempts on the reporting feature server"
::= { statPOTSFSEntry 252 }
statPOTSFSMsgCFCFORWARDFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful Call Forward Combination forwarding attempts on the reporting feature server"
::= { statPOTSFSEntry 253 }
statPOTSFSMsgCFCFORWARDAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of total Call Forward Combination forwarding attempts on the reporting feature server"
::= { statPOTSFSEntry 254 }
statPOTSFSMsgNSAINVOKESucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of No Solicitation Announcement successful invocations detected on the reporting feature server"
::= { statPOTSFSEntry 255 }
statPOTSFSMsgNSAINVOKEFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of No Solicitation Announcement unsuccessful invocations detected on the reporting feature server"
::= { statPOTSFSEntry 256 }
statPOTSFSMsgNSAINVOKEAbandon OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of No Solicitation Announcement invocations detected on the reporting feature server that were abandoned after the NSA announcement started but before the terminating endpoint began ringing"
::= { statPOTSFSEntry 257 }
statPOTSFSMsgPSSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Privacy Screening Invocations detected on the reporting feature server"
::= { statPOTSFSEntry 258 }
statPOTSFSMsgPSFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Privacy Screening Invocations failures detected on the reporting feature server"
::= { statPOTSFSEntry 259 }
statPOTSFSMsgPSMANAGESucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Managed Privacy Screening Activations/Deactivations detected on the reporting feature server"
::= { statPOTSFSEntry 260 }
statPOTSFSMsgPSMANAGEFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful Managed Privacy Screening Activations/Deactivations detected on the reporting feature server"
::= { statPOTSFSEntry 261 }
statPOTSFSMsgVMActSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Voice Mail Redirect Activations detected on the reporting feature server"
::= { statPOTSFSEntry 262 }
statPOTSFSMsgVMActFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful Voice Mail Redirect Activations detected on the reporting feature server"
::= { statPOTSFSEntry 263 }
statPOTSFSMsgVMDeactSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful Voice Mail Redirect Deactivations detected on the reporting feature server"
::= { statPOTSFSEntry 264 }
statPOTSFSMsgVMDeactFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful Voice Mail Redirect Deactivations detected on the reporting feature server"
::= { statPOTSFSEntry 265 }
statPOTSFSMsgVMAccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Voice Mail Redirect Accesses detected on the reporting feature server"
::= { statPOTSFSEntry 266 }
statPOTSFSMsgVMAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Voice Mail Redirect Invocations detected on the reporting feature server"
::= { statPOTSFSEntry 267 }
statPOTSFSMsgLCDAUTHAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of authorization attempts made for Limited Call Duration feature invocations on the reporting feature server"
::= { statPOTSFSEntry 268 }
statPOTSFSMsgLCDAUTHSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful authorization attempts made for Limited Call Duration feature invocations on the reporting feature server"
::= { statPOTSFSEntry 269 }
statPOTSFSMsgLCDAUTHFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful authorization attempts made for Limited Call Duration feature invocations on the reporting feature server"
::= { statPOTSFSEntry 270 }
statPOTSFSMsgLCDREAUTHFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessful re-authorization attempts made for Limited Call Duration feature invocations on the reporting feature server"
::= { statPOTSFSEntry 271 }
statPOTSFSMsgLCDFORCEDDisc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of forced call disconnections made for Limited Call Duration calls on the reporting feature server"
::= { statPOTSFSEntry 272 }
statPOTSFSMsgCOSTOLLFREEBlocked OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls that were screened based on class of service restrictions on making toll free calls."
::= { statPOTSFSEntry 273 }
statPOTSFSMsgTDISCCALLSOUTGBlocked OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls that were blocked based on temporary disconnect status of the subscriber. This applies to POTS, Centrex, MLHG, and PBX based subscribers."
::= { statPOTSFSEntry 274 }
statPOTSFSMsgCOSTotAUTHIVRSession OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Class of Service Authorization Code IVR sessions established on the reporting feature server"
::= { statPOTSFSEntry 275 }
statPOTSFSMsgCOSTotACCTIVRSession OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Class of Service Account Code IVR sessions established on the reporting feature server"
::= { statPOTSFSEntry 276 }
statPOTSFSMsgCOSTotIVRFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Class of Service IVR sessions that failed to established due to an IVR related failure on the reporting feature server"
::= { statPOTSFSEntry 277 }
statPOTSFSMsgMlsAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of attempts on the reporting feature server to change the language of choice by the user."
::= { statPOTSFSEntry 278 }
statPOTSFSMsgMlsSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of language change attempts there were successfully processed by the reporting feature server. This is indicative of successful termination of the IVR when the user successfully changes their language "
::= { statPOTSFSEntry 279 }
statPOTSFSMsgMlsRejectNoRsrc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of language change attempts that were refused due to a lack of available resources on the reporting feature server. The most likely cause of this situation is a lack of resources on the feature server to handle the IVR activity. This is normally a result of database access issues."
::= { statPOTSFSEntry 280 }
statPOTSFSMsgAsTermAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of attempts to place a call to an Application Server on the terminating side."
::= { statPOTSFSEntry 281 }
statPOTSFSMsgAsTermSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully placed calls to an Application Server on the terminating side."
::= { statPOTSFSEntry 282 }
statPOTSFSMsgAsTermFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessfully placed calls to an Application Server on the terminating side."
::= { statPOTSFSEntry 283 }
statPOTSFSMsgAsOrigAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of attempts to place a call to an Application Server on the originating side."
::= { statPOTSFSEntry 284 }
statPOTSFSMsgAsOrigSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully placed calls to an Application Server on the originating side."
::= { statPOTSFSEntry 285 }
statPOTSFSMsgAsOrigFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsuccessfully placed calls to an Application Server on the originating side."
::= { statPOTSFSEntry 286 }
statPOTSFSMsgAsOrigAbandon OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times a origination to the Application Server was abandoned while trying to connect."
::= { statPOTSFSEntry 287 }
statPOTSFSMsgAsIvrDialplanAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of attempts to use a simplified dialplan to collect digits."
::= { statPOTSFSEntry 288 }
statPOTSFSMsgAsIvrDialplanSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times a dialplan was successfully used to collect digits."
::= { statPOTSFSEntry 289 }
statPOTSFSMsgAsTermAbandon OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times a termination to the Application Server was abandoned while trying to connect."
::= { statPOTSFSEntry 290 }
statPOTSFSMsgAsVscAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of attempts to place a call to an Application Server using the VSC code"
::= { statPOTSFSEntry 291 }
statPOTSFSMsgAsVscSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully placed call attempts on an Application Server."
::= { statPOTSFSEntry 292 }
statPOTSFSMsgAsVscFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of failed call attempts on an Application Server. This includes abandon calls as well."
::= { statPOTSFSEntry 293 }
statPOTSFSMsgAsVscAbandon OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times a VSC initiated connection to the Application Server was abandoned while trying to connect."
::= { statPOTSFSEntry 294 }
statPOTSFSMsgCfrForwardAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter would be increased when BTS receives SIP 302 and POTS-FS initiates the CFR processing."
::= { statPOTSFSEntry 295 }
statPOTSFSMsgCfrForwardSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter would be increased when BTS receives SIP 302 and POTS-FS forwards the call to new destination successfully."
::= { statPOTSFSEntry 296 }
statPOTSFSMsgCfrForwardFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter would be increased when BTS receives SIP 302 and POTS-FS fails to forward the call to new destination."
::= { statPOTSFSEntry 297 }
statPOTSFSMsgCfnaRedirectSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter would be increased when BTS uses redirection mechanism to perform CFNA feature."
::= { statPOTSFSEntry 298 }
statPOTSFSMsgCfcRedirectSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter would be increased when BTS uses redirection mechanism to perform CFC-No-Answer feature."
::= { statPOTSFSEntry 299 }
statPOTSFSMsgVmRedirectSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter would be increased when BTS uses redirection mechanism to perform VW-No-Answer feature."
::= { statPOTSFSEntry 300 }
statPOTSFSMsgOcDpReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nunber of DPs (Detection Points) reported during periods of congestion. This is being pegged by the FS."
::= { statPOTSFSEntry 301 }
statPOTSSNRFindMeAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of find me attempts"
::= { statPOTSFSEntry 302 }
statPOTSSNRFindMeAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of find me calls answered"
::= { statPOTSFSEntry 303 }
statPOTSSNRFindMeFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of find me calls failed due to the system failure "
::= { statPOTSFSEntry 304 }
statPOTSSNRFindMeForkInvoke OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of forked calls invoked "
::= { statPOTSFSEntry 305 }
statPOTSSNRIvrRedirectVm OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of find me calls redirected to voice mail "
::= { statPOTSFSEntry 306 }
statPOTSSNRIvrAccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times SNR IVR system accessed "
::= { statPOTSFSEntry 307 }
statPOTSSNRIvrInvalidUidAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IVR invalid User ID attempts "
::= { statPOTSFSEntry 308 }
statPOTSSNRIvrInvalidPinAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of IVR invalid PIN attempts"
::= { statPOTSFSEntry 309 }
statPOTSFSCFNRSuccActiv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for successful Activation Attempts"
::= { statPOTSFSEntry 310 }
statPOTSFSCFNRSuccInvoc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for successful Invocation of CFNR"
::= { statPOTSFSEntry 311 }
statPOTSFSCFNRSuccDectiv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for successful Deactivation Attempts"
::= { statPOTSFSEntry 312 }
statPOTSFSCFNRSuccInterrog OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for sucessful Interrogation of CFNR"
::= { statPOTSFSEntry 313 }
statPOTSFSCFNRUnsuccActiv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for unsuccessful Activation attempts "
::= { statPOTSFSEntry 314 }
statPOTSFSCFNRUnsuccInvoc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for unsuccessful Invocation of CFNR"
::= { statPOTSFSEntry 315 }
statPOTSFSCFNRUnsuccDectiv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for unsuccessful Deactivation attempts"
::= { statPOTSFSEntry 316 }
statPOTSFSCFNRUnsuccInterrog OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for unsuccessful Interrogation of CFNR"
::= { statPOTSFSEntry 317 }
statPOTSFSACARTOptionalQueryReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for ACART Optional Query Requests"
::= { statPOTSFSEntry 318 }
statPOTSSecondExtCNAMQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for the total number of query attempts made to secondary external database for CNAM"
::= { statPOTSFSEntry 319 }
statPOTSSecondExtCNAMQuerySuc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for the total number of successful query responses received from secondary external database for CNAM"
::= { statPOTSFSEntry 320 }
statPOTSSecondExtCNAMFailApp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for the total number of secondary CNAM queries failed by application"
::= { statPOTSFSEntry 321 }
statPOTSSecondExtCNAMFailNetw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"counter for the total number of secondary CNAM queries failed by network"
::= { statPOTSFSEntry 322 }
statPCTToolsTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatPCTToolsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Metrics related to invocations of the LIDB Query Verification Tools."
::= { fsPotsCtxStatistics 2 }
statPCTToolsEntry OBJECT-TYPE
SYNTAX StatPCTToolsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for metrics related to invocations of the LIDB Query
Verification Tools statistics Table."
INDEX { statPCTToolsComponentID }
::= { statPCTToolsTable 1 }
StatPCTToolsEntry ::= SEQUENCE {
statPCTToolsComponentID DisplayString,
statPCTToolsDOW DayOfWeek,
statPCTToolsTOD TimeOfDay,
statPCTToolsLIDBQueryAttmp Counter32,
statPCTToolsLIDBQuerySucc Counter32
}
statPCTToolsComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PCT Tools Component Identifier"
::= { statPCTToolsEntry 1 }
statPCTToolsDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statPCTToolsEntry 2 }
statPCTToolsTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statPCTToolsEntry 3 }
statPCTToolsLIDBQueryAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the reporting feature server received a
request to perform an LIDB query from the QVT tool."
::= { statPCTToolsEntry 4 }
statPCTToolsLIDBQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the reporting feature server received a
request to perform an LIDB query from the QVT tool and completed it
successfully."
::= { statPCTToolsEntry 5 }
statMGCPAdapterTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatMGCPAdapterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MGCP Adapter Statistics."
::= { callAgentStatistics 9 }
statMGCPAdapterEntry OBJECT-TYPE
SYNTAX StatMGCPAdapterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for MGCP Adapter Statistics Table."
INDEX { statMGCPAdaptComponentID }
::= { statMGCPAdapterTable 1 }
StatMGCPAdapterEntry ::= SEQUENCE {
statMGCPAdaptComponentID DisplayString,
statMGCPAdaptDOW DayOfWeek,
statMGCPAdaptTOD TimeOfDay,
statMGCPAdaptDecodeErr Counter32,
statMGCPAdaptEncodeErr Counter32,
statMGCPAdaptUnreachable Counter32,
statMGCPAdaptSendErrors Counter32,
statMGCPAdaptCRCXAckRecv Counter32,
statMGCPAdaptCRCXNackRecv Counter32,
statMGCPAdaptCRCXSent Counter32,
statMGCPAdaptMDCXAckRecv Counter32,
statMGCPAdaptMDCXNackRecv Counter32,
statMGCPAdaptMDCXSent Counter32,
statMGCPAdaptDLCXRecv Counter32,
statMGCPAdaptDLCXSent Counter32,
statMGCPAdaptDLCXAckRecv Counter32,
statMGCPAdaptDLCXNackRecv Counter32,
statMGCPAdaptRQNTAckRecv Counter32,
statMGCPAdaptRQNTNackRecv Counter32,
statMGCPAdaptRQNTSent Counter32,
statMGCPAdaptAUEPAckRecv Counter32,
statMGCPAdaptAUEPNackRecv Counter32,
statMGCPAdaptAUEPSent Counter32,
statMGCPAdaptNTFYRecv Counter32,
statMGCPAdaptRSIPRecv Counter32,
statMGCPAdaptRSIPAckSent Counter32,
statMGCPAdaptAucxTx Counter32,
statMGCPAdaptAucxAckRx Counter32,
statMGCPAdaptAucxNackRx Counter32,
statMGCPAdaptOcCallRejected Counter32
}
statMGCPAdaptComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MGCP Adapter Component Identifier"
::= { statMGCPAdapterEntry 1 }
statMGCPAdaptDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statMGCPAdapterEntry 2 }
statMGCPAdaptTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statMGCPAdapterEntry 3 }
statMGCPAdaptDecodeErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP messages received that failed decoding on
the reporting call agent"
::= { statMGCPAdapterEntry 4 }
statMGCPAdaptEncodeErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP messages to be sent that failed encoding
on the reporting call agent"
::= { statMGCPAdapterEntry 5 }
statMGCPAdaptUnreachable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP messages sent from the reporting call
agent that failed due to the target gateway being unreachable"
::= { statMGCPAdapterEntry 6 }
statMGCPAdaptSendErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP messages sent from the reporting call
agent that failed while being sent to the target gateway"
::= { statMGCPAdapterEntry 7 }
statMGCPAdaptCRCXAckRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP CRCX acknowledgement messages received by
the reporting call agent"
::= { statMGCPAdapterEntry 8 }
statMGCPAdaptCRCXNackRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP CRCX non-acknowledgement messages received
by the reporting call agent"
::= { statMGCPAdapterEntry 9 }
statMGCPAdaptCRCXSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP CRCX messages sent by the reporting call
agent"
::= { statMGCPAdapterEntry 10 }
statMGCPAdaptMDCXAckRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP MDCX acknowledgement messages received by
the reporting call agent"
::= { statMGCPAdapterEntry 11 }
statMGCPAdaptMDCXNackRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP MDCX non-acknowledgement messages received
by the reporting call agent"
::= { statMGCPAdapterEntry 12 }
statMGCPAdaptMDCXSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP MDCX non-acknowledgement messages received
by the reporting call agent"
::= { statMGCPAdapterEntry 13 }
statMGCPAdaptDLCXRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP DLCX messages received from gateways by
the reporting call agent"
::= { statMGCPAdapterEntry 14 }
statMGCPAdaptDLCXSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP DLCX messages sent by the reporting call
agent"
::= { statMGCPAdapterEntry 15 }
statMGCPAdaptDLCXAckRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP DLCX acknowledgement messages received by
the reporting call agent"
::= { statMGCPAdapterEntry 16 }
statMGCPAdaptDLCXNackRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP DLCX non-acknowledgement messages received
by the reporting call agent"
::= { statMGCPAdapterEntry 17 }
statMGCPAdaptRQNTAckRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP RQNT acknowledgement messages received by
the reporting call agent"
::= { statMGCPAdapterEntry 18 }
statMGCPAdaptRQNTNackRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP RQNT acknowledgement messages received
by the reporting call agent"
::= { statMGCPAdapterEntry 19 }
statMGCPAdaptRQNTSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP RQNT messages sent by the reporting call
agent"
::= { statMGCPAdapterEntry 20 }
statMGCPAdaptAUEPAckRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP AUEP acknowledgement messages received by
the reporting call agent"
::= { statMGCPAdapterEntry 21 }
statMGCPAdaptAUEPNackRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP AUEP non-acknowledgement messages received
by the reporting call agent"
::= { statMGCPAdapterEntry 22 }
statMGCPAdaptAUEPSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP AUEP messages sent by the reporting call
agent"
::= { statMGCPAdapterEntry 23 }
statMGCPAdaptNTFYRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP NTFY messages received from gateways by
the reporting call agent"
::= { statMGCPAdapterEntry 24 }
statMGCPAdaptRSIPRecv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP RSIP messages received from gateways by
the reporting call agent"
::= { statMGCPAdapterEntry 25 }
statMGCPAdaptRSIPAckSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP RSIP acknowledgement messages sent by the
reporting call agent"
::= { statMGCPAdapterEntry 26 }
statMGCPAdaptAucxTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AUCX (Audit Connection) messages that were sent by the reporting call agent"
::= { statMGCPAdapterEntry 27 }
statMGCPAdaptAucxAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AUCX ACK (Audit Connection Acknowledgement) messages that were received by the reporting call agent."
::= { statMGCPAdapterEntry 28 }
statMGCPAdaptAucxNackRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AUCX NACK (Audit Connection NotAcknowlegement) messages that were received by the reporting call agent."
::= { statMGCPAdapterEntry 29 }
statMGCPAdaptOcCallRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MGCP calls rejected due to system overload"
::= { statMGCPAdapterEntry 30 }
statSIMTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatSIMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SIM Statistics."
::= { callAgentStatistics 1 }
statSIMEntry OBJECT-TYPE
SYNTAX StatSIMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for SIM Statistics Table."
INDEX { statSIMComponentID }
::= { statSIMTable 1 }
StatSIMEntry ::= SEQUENCE {
statSIMComponentID DisplayString,
statSIMDOW DayOfWeek,
statSIMTOD TimeOfDay,
statSIMSISIncomingMsg Counter32,
statSIMSISIncomingMsgSucc Counter32,
statSIMSISOutgoingMsg Counter32,
statSIMSISOutgoingMsgSucc Counter32,
statSIMSISMsgREQRETRANRcv Counter32,
statSIMSISMsgREQRETRANXmit Counter32,
statSIMSISMsgRSPRETRANRcv Counter32,
statSIMSISMsgRSPRETRANXmit Counter32,
statSIMSIST1TimerExpired Counter32,
statSIMSIST2TimerReached Counter32,
statSIMSISMsgINVITERcv Counter32,
statSIMSISMsgINVITEXmit Counter32,
statSIMSISMsgCANCELRcv Counter32,
statSIMSISMsgCANCELXmit Counter32,
statSIMSISMsgBYERcv Counter32,
statSIMSISMsgBYEXmit Counter32,
statSIMSISMsgACKRcv Counter32,
statSIMSISMsgACKXmit Counter32,
statSIMSISMsgOPTIONRcv Counter32,
statSIMSISMsgOPTIONXmit Counter32,
statSIMSISMsgREGISTERRcv Counter32,
statSIMSISMsgREGISTERXmit Counter32,
statSIMSISMsgINFORcv Counter32,
statSIMSISMsgINFOXmit Counter32,
statSIMSISMsgNotifyRcv Counter32,
statSIMSISMsgNotifyXmit Counter32,
statSIMSIS100Rcv Counter32,
statSIMSIS100Xmit Counter32,
statSIMSIS18xRcv Counter32,
statSIMSIS18xXmit Counter32,
statSIMSIS200Rcv Counter32,
statSIMSIS200Xmit Counter32,
statSIMSIS3xxRcv Counter32,
statSIMSIS3xxXmit Counter32,
statSIMSIS4xxRcv Counter32,
statSIMSIS4xxXmit Counter32,
statSIMSIS5xxRcv Counter32,
statSIMSIS5xxXmit Counter32,
statSIMSIS6xxRcv Counter32,
statSIMSIS6xxXmit Counter32,
statSIMSIS7xxRcv Counter32,
statSIMSIS7xxXmit Counter32,
statSIMBCMMsgRcv Counter32,
statSIMNewRelationsOpened Counter32,
statSIMMsgTDPNsRcv Counter32,
statSIMMsgTDPRsRcv Counter32,
statSIMMsgEDPNsRcv Counter32,
statSIMMsgEDPRsRcv Counter32,
statSIMMsgINSTRUCTXmitToBCM Counter32,
statSIMMsgINSTRUCTRcvToBCM Counter32,
statSIMMsgTERMINATIONRcv Counter32,
statSIMMsgTERMINATIONXmit Counter32,
statSIMMsgFSRcv Counter32,
statSIMMsgFSXmit Counter32,
statSIMMsgFSPingXmit Counter32,
statSIMMsgFSPingNoReponse Counter32,
statSIMMsgFSRestartXmit Counter32,
statSIMFSAsyncMsgsXmit Counter32,
statSIMSISMsgProvRSPRETRANRcv Counter32,
statSIMSISMsgProvRSPRETRANXmit Counter32,
statSIMSISMsgPRACKRcv Counter32,
statSIMSISMsgPRACKXmit Counter32,
statSIMSISMsgSUBSCRIBERcv Counter32,
statSIMSISMsgSUBSCRIBEXmit Counter32,
statSIMSISMsgREFERRcv Counter32,
statSIMSISMsgREFERXmit Counter32,
statSIMSISMsgREFERWREPLACESRcv Counter32,
statSIMSISMsgINVITEREPLACESXmit Counter32,
statSIMSISMsgINVITEREPLACESRcv Counter32,
statSIMSISMsgREL100Rcv Counter32,
statSIMSISMsgREL100Xmit Counter32,
statSIMSISMsgUNSUPPORTEDRcv Counter32,
statSIMSISMsgUPDATERcv Counter32,
statSIMSISMsgUPDATEXmit Counter32,
statSIMAuditCCBFreed Counter32,
statSIMAuditSIPCCBFreed Counter32,
statSIMOcTrigFiltered Counter32,
statSIMOcEmgTrigForced Counter32,
statSIMOcTrigForced Counter32
}
statSIMComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SIM Component Identifier"
::= { statSIMEntry 1 }
statSIMDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statSIMEntry 2 }
statSIMTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statSIMEntry 3 }
statSIMSISIncomingMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server attempted to receive"
::= { statSIMEntry 4 }
statSIMSISIncomingMsgSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server successfully received"
::= { statSIMEntry 5 }
statSIMSISOutgoingMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server attempted to send"
::= { statSIMEntry 6 }
statSIMSISOutgoingMsgSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server successfully sent"
::= { statSIMEntry 7 }
statSIMSISMsgREQRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP request retransmission messages the
reporting call agent or feature server received"
::= { statSIMEntry 8 }
statSIMSISMsgREQRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP request retransmission messages the
reporting call agent or feature server sent"
::= { statSIMEntry 9 }
statSIMSISMsgRSPRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP response retransmission messages the
reporting call agent or feature server received"
::= { statSIMEntry 10 }
statSIMSISMsgRSPRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP response retransmission messages the
reporting call agent or feature server sent"
::= { statSIMEntry 11 }
statSIMSIST1TimerExpired OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP T1 Timer expirations that occurred on the
reporting call agent or feature server received over the
collection interval"
::= { statSIMEntry 12 }
statSIMSIST2TimerReached OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP T2 Timer expirations that occurred on the
reporting call agent or feature server received over the
collection interval"
::= { statSIMEntry 13 }
statSIMSISMsgINVITERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent
or feature server received"
::= { statSIMEntry 14 }
statSIMSISMsgINVITEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent
or feature server sent"
::= { statSIMEntry 15 }
statSIMSISMsgCANCELRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent
or feature server received"
::= { statSIMEntry 18 }
statSIMSISMsgCANCELXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent
or feature server sent"
::= { statSIMEntry 19 }
statSIMSISMsgBYERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP BYE messages the reporting call agent
or feature server received"
::= { statSIMEntry 20 }
statSIMSISMsgBYEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP BYE messages the reporting call agent
or feature server sent"
::= { statSIMEntry 21 }
statSIMSISMsgACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP ACK messages the reporting call agent
or feature server received"
::= { statSIMEntry 22 }
statSIMSISMsgACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP ACK messages the reporting call agent
or feature server sent"
::= { statSIMEntry 23 }
statSIMSISMsgOPTIONRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent
or feature server received"
::= { statSIMEntry 24 }
statSIMSISMsgOPTIONXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent
or feature server sent"
::= { statSIMEntry 25 }
statSIMSISMsgREGISTERRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent
or feature server received"
::= { statSIMEntry 26 }
statSIMSISMsgREGISTERXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent
or feature server sent"
::= { statSIMEntry 27 }
statSIMSISMsgINFORcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INFO messages the reporting call agent or
feature server received"
::= { statSIMEntry 28 }
statSIMSISMsgINFOXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INFO messages the reporting call agent or
feature server sent"
::= { statSIMEntry 29 }
statSIMSISMsgNotifyRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent or
feature server received"
::= { statSIMEntry 30 }
statSIMSISMsgNotifyXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent or
feature server sent"
::= { statSIMEntry 31 }
statSIMSIS100Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting
call agent or feature server received"
::= { statSIMEntry 32 }
statSIMSIS100Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting
call agent or feature server sent"
::= { statSIMEntry 33 }
statSIMSIS18xRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the
reporting call agent or feature server received"
::= { statSIMEntry 34 }
statSIMSIS18xXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the
reporting call agent or feature server sent"
::= { statSIMEntry 35 }
statSIMSIS200Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting
call agent or feature server received"
::= { statSIMEntry 36 }
statSIMSIS200Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting
call agent or feature server received"
::= { statSIMEntry 37 }
statSIMSIS3xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting
call agent or feature server received"
::= { statSIMEntry 38 }
statSIMSIS3xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting
call agent or feature server sent"
::= { statSIMEntry 39 }
statSIMSIS4xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the
reporting call agent or feature server received"
::= { statSIMEntry 40 }
statSIMSIS4xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the
reporting call agent or feature server sent"
::= { statSIMEntry 41 }
statSIMSIS5xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the
reporting call agent or feature server received"
::= { statSIMEntry 42 }
statSIMSIS5xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the
reporting call agent or feature server sent"
::= { statSIMEntry 43 }
statSIMSIS6xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the
reporting call agent or feature server received"
::= { statSIMEntry 44 }
statSIMSIS6xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the
reporting call agent or feature server sent"
::= { statSIMEntry 45 }
statSIMSIS7xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting
call agent or feature server received"
::= { statSIMEntry 46 }
statSIMSIS7xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting
call agent or feature server sent"
::= { statSIMEntry 47 }
statSIMBCMMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of messages received by call processing from a
feature server in the reporting call agent"
::= { statSIMEntry 48 }
statSIMNewRelationsOpened OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of TDP-Rs received from call processing by SIM in
the reporting call agent"
::= { statSIMEntry 49 }
statSIMMsgTDPNsRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Trigger Detection Point messages received from
call processing in the reporting call agent that do not
require a response from the target feature server"
::= { statSIMEntry 50 }
statSIMMsgTDPRsRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Trigger Detection Point messages received from
call processing in the reporting call agent that do require
a response from the target feature server"
::= { statSIMEntry 51 }
statSIMMsgEDPNsRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Event Detection Point messages received from
call processing in the reporting call agent that do not
require a response from the target feature server"
::= { statSIMEntry 52 }
statSIMMsgEDPRsRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Event Detection Point messages received from
call processing in the reporting call agent that do require a
response from the target feature server"
::= { statSIMEntry 53 }
statSIMMsgINSTRUCTXmitToBCM OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of INSTRUCT messages sent to feature servers by
the reporting call agent"
::= { statSIMEntry 54 }
statSIMMsgINSTRUCTRcvToBCM OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of INSTRUCT messages received from feature servers
by the reporting call agent"
::= { statSIMEntry 55 }
statSIMMsgTERMINATIONRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of TERMINATE messages received from feature
servers by the reporting call agent"
::= { statSIMEntry 56 }
statSIMMsgTERMINATIONXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of TERMINATE messages sent to feature servers by
the reporting call agent"
::= { statSIMEntry 57 }
statSIMMsgFSRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FCP messages sent to feature servers by the
reporting call agent"
::= { statSIMEntry 58 }
statSIMMsgFSXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of FCP messages received from feature servers by
the reporting call agent"
::= { statSIMEntry 59 }
statSIMMsgFSPingXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PING messages sent to feature servers by the
reporting call agent"
::= { statSIMEntry 60 }
statSIMMsgFSPingNoReponse OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times no response was received from the target feature server when sent a PING message by the reporting call agent"
::= { statSIMEntry 61 }
statSIMMsgFSRestartXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RESTART messages sent to feature servers by
the reporting call agent"
::= { statSIMEntry 62 }
statSIMFSAsyncMsgsXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ASYNC messages sent to feature servers by the
reporting feature server"
::= { statSIMEntry 63 }
statSIMSISMsgProvRSPRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP provisioning response retransmission
messages the reporting call agent or feature server received"
::= { statSIMEntry 64 }
statSIMSISMsgProvRSPRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP provisioning response retransmission
messages the reporting call agent or feature server sent"
::= { statSIMEntry 65 }
statSIMSISMsgPRACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent
or feature server received"
::= { statSIMEntry 66 }
statSIMSISMsgPRACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent
or feature server sent"
::= { statSIMEntry 67 }
statSIMSISMsgSUBSCRIBERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call agent
or feature server received"
::= { statSIMEntry 68 }
statSIMSISMsgSUBSCRIBEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call agent
or feature server sent"
::= { statSIMEntry 69 }
statSIMSISMsgREFERRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER messages the reporting call agent
or feature server received"
::= { statSIMEntry 70 }
statSIMSISMsgREFERXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER messages the reporting call agent
or feature server sent"
::= { statSIMEntry 71 }
statSIMSISMsgREFERWREPLACESRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER REPLACES messages the reporting
call agent or feature server received"
::= { statSIMEntry 72 }
statSIMSISMsgINVITEREPLACESXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting
call agent or feature server sent"
::= { statSIMEntry 73 }
statSIMSISMsgINVITEREPLACESRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting
call agent or feature server received"
::= { statSIMEntry 74 }
statSIMSISMsgREL100Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting
call agent or feature server received"
::= { statSIMEntry 75 }
statSIMSISMsgREL100Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting
call agent or feature server sent"
::= { statSIMEntry 76 }
statSIMSISMsgUNSUPPORTEDRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsupported SIP messages the reporting
call agent or feature server received"
::= { statSIMEntry 77 }
statSIMSISMsgUPDATERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP UPDATE messages the reporting call agent
or feature server recieved"
::= { statSIMEntry 78 }
statSIMSISMsgUPDATEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP UPDATE messages the reporting call agent
or feature server sent"
::= { statSIMEntry 79 }
statSIMAuditCCBFreed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SIM relationships terminated with SSF due to the SIM memory audit on the reporting call agent"
::= { statSIMEntry 81 }
statSIMAuditSIPCCBFreed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SIM to SIP relationships released with the feature server do to the SIM memory audit on the reporting call agent"
::= { statSIMEntry 82 }
statSIMOcTrigFiltered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of triggers dropped when a feature server is overloaded. This is a global counter for all of the feature servers associated with this call agent. This counter is updated every time a trigger is filtered due to congestion on a feature server."
::= { statSIMEntry 83 }
statSIMOcEmgTrigForced OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of emergency triggers forced when a feature server is overloaded. This is a global counter for all of the feature servers associated with this call agent. This counter is updated every time an emergency trigger is forced to a feature server when the feature server is congested."
::= { statSIMEntry 84 }
statSIMOcTrigForced OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of EDP triggers forced when a feature server is overloaded. This is a global counter for all of the feature servers associated with this call agent. This counter is updated every time an EDP trigger is forced to a feature server when the feature server is congested."
::= { statSIMEntry 85 }
statAINFSTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatAINFSEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"AIN FS Statistics ."
::= { fsAinStatistics 1 }
statAINFSEntry OBJECT-TYPE
SYNTAX StatAINFSEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row description for AIN FS Statistics Table."
INDEX { statAINFSComponentID }
::= { statAINFSTable 1 }
StatAINFSEntry ::= SEQUENCE {
statAINFSComponentID DisplayString,
statAINFSDOW DayOfWeek,
statAINFSTOD TimeOfDay,
statAINFSSipRcvTot Counter32,
statAINFSSipSuccRcvTot Counter32,
statAINFSSipXmitTot Counter32,
statAINFSSipSuccXmitTot Counter32,
statAINFSSipREQRetranRcv Counter32,
statAINFSSipREQRetranXmit Counter32,
statAINFSSipRSPRetranRcv Counter32,
statAINFSSipRSPRetranXmit Counter32,
statAINFSSipT1TmrExpired Counter32,
statAINFSSipT2TmrReached Counter32,
statAINFSSipINVITERcv Counter32,
statAINFSSipINVITEXmit Counter32,
statAINFSSipCANCELRcv Counter32,
statAINFSSipCANCELXmit Counter32,
statAINFSSipBYERcv Counter32,
statAINFSSipBYEXmit Counter32,
statAINFSSipACKRcv Counter32,
statAINFSSipACKXmit Counter32,
statAINFSSipOPTIONSRcv Counter32,
statAINFSSipOPTIONSXmit Counter32,
statAINFSSipREGISTERRcv Counter32,
statAINFSSipREGISTERXmit Counter32,
statAINFSSipINFORcv Counter32,
statAINFSSipINFOXmit Counter32,
statAINFSSipNOTIFYRcv Counter32,
statAINFSSipNOTIFYXmit Counter32,
statAINFSSip100Rcv Counter32,
statAINFSSip100Xmit Counter32,
statAINFSSip18xRcv Counter32,
statAINFSSip18xXmit Counter32,
statAINFSSip200Rcv Counter32,
statAINFSSip200Xmit Counter32,
statAINFSSip3xxRcv Counter32,
statAINFSSip3xxXmit Counter32,
statAINFSSip4xxRcv Counter32,
statAINFSSip4xxXmit Counter32,
statAINFSSip5xxRcv Counter32,
statAINFSSip5xxXmit Counter32,
statAINFSSip6xxRcv Counter32,
statAINFSSip6xxXmit Counter32,
statAINFSSip7xxRcv Counter32,
statAINFSSip7xxXmit Counter32,
statAINFSNumAIN Counter32,
statAINFSNum8xx Counter32,
statAINFSNumExt8xx Counter32,
statAINFSNumExt8xxSucc Counter32,
statAINFSNumExt8xxFailAppl Counter32,
statAINFSNumExt8xxFailNet Counter32,
statAINFSNumLoc8xx Counter32,
statAINFSNumLoc8xxSucc Counter32,
statAINFSNumLoc8xxAniBlk Counter32,
statAINFSNumLoc8xxIIBlk Counter32,
statAINFSNumLoc8xxDnisSucc Counter32,
statAINFSNumLoc8xxRtngSucc Counter32,
statAINFSNumLoc8xxRerouted Counter32,
statAINFSNumLoc8xxFailAppl Counter32,
statAINFSNumLNP Counter32,
statAINFSNumExtLNP Counter32,
statAINFSNumExtLNPSucc Counter32,
statAINFSNumExtLNPFailAppl Counter32,
statAINFSNumExtLNPFailNet Counter32,
statAINFSNumCNAM Counter32,
statAINFSNumExtCNAM Counter32,
statAINFSNumExtCNAMSucc Counter32,
statAINFSNumExtCNAMFailAppl Counter32,
statAINFSNumExt8xxQueryFail Counter32,
statAINFSNumExtLNPQueryLRN Counter32,
statAINFSNumExtLNPQueryFail Counter32,
statAINFSSIPMsgProvRSPRETRANRcv Counter32,
statAINFSSIPMsgProvRSPRETRANXmit Counter32,
statAINFSSIPMsgPRACKRcv Counter32,
statAINFSSIPMsgPRACKXmit Counter32,
statAINFSSIPMsgSUBSCRIBERcv Counter32,
statAINFSSIPMsgSUBSCRIBEXmit Counter32,
statAINFSSIPMsgREFERRcv Counter32,
statAINFSSIPMsgREFERXmit Counter32,
statAINFSSIPMsgREFERWREPLACESRcv Counter32,
statAINFSSIPMsgINVITEREPLACESXmit Counter32,
statAINFSSIPMsgINVITEREPLACESRcv Counter32,
statAINFSSIPMsgREL100Rcv Counter32,
statAINFSSIPMsgREL100Xmit Counter32,
statAINFSSIPMsgUNSUPPORTEDRcv Counter32
}
statAINFSComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"AIN Feature Server Identifier"
::= { statAINFSEntry 1 }
statAINFSDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Day of week statistics was collected."
::= { statAINFSEntry 2 }
statAINFSTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statAINFSEntry 3 }
statAINFSSipRcvTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server attempted to receive"
::= { statAINFSEntry 4 }
statAINFSSipSuccRcvTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server successfully received"
::= { statAINFSEntry 5 }
statAINFSSipXmitTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server attempted to send"
::= { statAINFSEntry 6 }
statAINFSSipSuccXmitTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server successfully sent"
::= { statAINFSEntry 7 }
statAINFSSipREQRetranRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP request retransmission messages the
reporting call agent or feature server received"
::= { statAINFSEntry 8 }
statAINFSSipREQRetranXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP request retransmission messages the
reporting call agent or feature server sent"
::= { statAINFSEntry 9 }
statAINFSSipRSPRetranRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP response retransmission messages the
reporting call agent or feature server received"
::= { statAINFSEntry 10 }
statAINFSSipRSPRetranXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP response retransmission messages the
reporting call agent or feature server sent"
::= { statAINFSEntry 11 }
statAINFSSipT1TmrExpired OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP T1 Timer expirations that occurred on the
reporting call agent or feature server received over the
collection interval"
::= { statAINFSEntry 12 }
statAINFSSipT2TmrReached OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP T2 Timer expirations that occurred on the
reporting call agent or feature server received over the
collection interval"
::= { statAINFSEntry 13 }
statAINFSSipINVITERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent
or feature server received"
::= { statAINFSEntry 14 }
statAINFSSipINVITEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 15 }
statAINFSSipCANCELRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent
or feature server received"
::= { statAINFSEntry 16 }
statAINFSSipCANCELXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 17 }
statAINFSSipBYERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP BYE messages the reporting call agent
or feature server received"
::= { statAINFSEntry 18 }
statAINFSSipBYEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP BYE messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 19 }
statAINFSSipACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP ACK messages the reporting call agent
or feature server received"
::= { statAINFSEntry 20 }
statAINFSSipACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP ACK messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 21 }
statAINFSSipOPTIONSRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent
or feature server received"
::= { statAINFSEntry 22 }
statAINFSSipOPTIONSXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 23 }
statAINFSSipREGISTERRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent
or feature server received"
::= { statAINFSEntry 24 }
statAINFSSipREGISTERXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 25 }
statAINFSSipINFORcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP INFO messages the reporting call agent
or feature server received"
::= { statAINFSEntry 26 }
statAINFSSipINFOXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP INFO messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 27 }
statAINFSSipNOTIFYRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent
or feature server received"
::= { statAINFSEntry 28 }
statAINFSSipNOTIFYXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 29 }
statAINFSSip100Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting
call agent or feature server received"
::= { statAINFSEntry 30 }
statAINFSSip100Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting
call agent or feature server sent"
::= { statAINFSEntry 31 }
statAINFSSip18xRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the reporting
call agent or feature server received"
::= { statAINFSEntry 32 }
statAINFSSip18xXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the reporting
call agent or feature server sent"
::= { statAINFSEntry 33 }
statAINFSSip200Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting
call agent or feature server received"
::= { statAINFSEntry 34 }
statAINFSSip200Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting
call agent or feature server sent"
::= { statAINFSEntry 35 }
statAINFSSip3xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting
call agent or feature server received"
::= { statAINFSEntry 36 }
statAINFSSip3xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting
call agent or feature server sent"
::= { statAINFSEntry 37 }
statAINFSSip4xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the
reporting call agent or feature server received"
::= { statAINFSEntry 38 }
statAINFSSip4xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the
reporting call agent or feature server sent"
::= { statAINFSEntry 39 }
statAINFSSip5xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the
reporting call agent or feature server received"
::= { statAINFSEntry 40 }
statAINFSSip5xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the
reporting call agent or feature server sent"
::= { statAINFSEntry 41 }
statAINFSSip6xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the
reporting call agent or feature server received"
::= { statAINFSEntry 42 }
statAINFSSip6xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the
reporting call agent or feature server sent"
::= { statAINFSEntry 43 }
statAINFSSip7xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting
call agent or feature server received"
::= { statAINFSEntry 44 }
statAINFSSip7xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting
call agent or feature server sent"
::= { statAINFSEntry 45 }
statAINFSNumAIN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of queries attempted on the reporting
feature server"
::= { statAINFSEntry 46 }
statAINFSNum8xx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries attempted on the
reporting feature server"
::= { statAINFSEntry 47 }
statAINFSNumExt8xx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries that resulted in an
external query to a network database attempted on the
reporting feature server"
::= { statAINFSEntry 48 }
statAINFSNumExt8xxSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries that resulted in a
successful external query to a network database attempted on
the reporting feature server"
::= { statAINFSEntry 49 }
statAINFSNumExt8xxFailAppl OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries that resulted in a
failed external query to a network database due to an
application failure from the reporting feature server"
::= { statAINFSEntry 50 }
statAINFSNumExt8xxFailNet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries that resulted in a
failed external query to a network database due to a network
communication failure from the reporting feature server"
::= { statAINFSEntry 51 }
statAINFSNumLoc8xx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries attempted to be
processed locally on the reporting feature server"
::= { statAINFSEntry 52 }
statAINFSNumLoc8xxSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries successfully processed
locally on the reporting feature server"
::= { statAINFSEntry 53 }
statAINFSNumLoc8xxAniBlk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries that were blocked due
to ANI screening processed locally on the reporting feature
server"
::= { statAINFSEntry 54 }
statAINFSNumLoc8xxIIBlk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries that were blocked due
to II screening processed locally on the reporting
feature server"
::= { statAINFSEntry 55 }
statAINFSNumLoc8xxDnisSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX DNIS translation queries successfully
processed locally on the reporting feature server"
::= { statAINFSEntry 56 }
statAINFSNumLoc8xxRtngSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX routing translation queries successfully
processed locally on the reporting feature server"
::= { statAINFSEntry 57 }
statAINFSNumLoc8xxRerouted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries successfully processed
locally on the reporting feature server that resulted
in re-routing"
::= { statAINFSEntry 58 }
statAINFSNumLoc8xxFailAppl OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX translation queries that resulted in
a failure due to an application error on the reporting
feature server"
::= { statAINFSEntry 59 }
statAINFSNumLNP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of LNP translation queries attempted on the
reporting feature server"
::= { statAINFSEntry 60 }
statAINFSNumExtLNP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of LNP translation queries that resulted in an
external query to a network database attempted on the
reporting feature server"
::= { statAINFSEntry 61 }
statAINFSNumExtLNPSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of LNP translation queries that resulted in a
successful external query to a network database attempted on
the reporting feature server"
::= { statAINFSEntry 62 }
statAINFSNumExtLNPFailAppl OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of LNP translation queries that resulted in a
failed external query to a network database due to an
application failure from the reporting feature server"
::= { statAINFSEntry 63 }
statAINFSNumExtLNPFailNet OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of LNP translation queries that resulted in a
failed external query to a network database due to a network
communication failure from the reporting feature server"
::= { statAINFSEntry 64 }
statAINFSNumCNAM OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of CNAM translation queries attempted on the
reporting feature server"
::= { statAINFSEntry 65 }
statAINFSNumExtCNAM OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of CNAM translation queries that resulted in an
external query to a network database attempted on the
reporting feature server"
::= { statAINFSEntry 66 }
statAINFSNumExtCNAMSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of CNAM translation queries that resulted in a
successful external query to a network database attempted on
the reporting feature server"
::= { statAINFSEntry 67 }
statAINFSNumExtCNAMFailAppl OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of CNAM translation queries that resulted in a
failed external query to a network database due to an
application failure from the reporting feature server"
::= { statAINFSEntry 68 }
statAINFSNumExt8xxQueryFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of 8XX queries that failed due to an SCP timeout
when attempted by the reporting feature server"
::= { statAINFSEntry 69 }
statAINFSNumExtLNPQueryLRN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of LNP queries that resulted in a successful
response from the SCP with an LRN when attempted by the
reporting feature server"
::= { statAINFSEntry 70 }
statAINFSNumExtLNPQueryFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of LNP queries that failed due to an SCP timeout
when attempted by the reporting feature server"
::= { statAINFSEntry 71 }
statAINFSSIPMsgProvRSPRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP provisioning response retransmission
messages the reporting call agent or feature server received"
::= { statAINFSEntry 72 }
statAINFSSIPMsgProvRSPRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP provisioning response retransmission
messages the reporting call agent or feature server sent"
::= { statAINFSEntry 73 }
statAINFSSIPMsgPRACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent or
feature server received"
::= { statAINFSEntry 74 }
statAINFSSIPMsgPRACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 75 }
statAINFSSIPMsgSUBSCRIBERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call agent
or feature server received"
::= { statAINFSEntry 76 }
statAINFSSIPMsgSUBSCRIBEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 77 }
statAINFSSIPMsgREFERRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP REFER messages the reporting call agent
or feature server received"
::= { statAINFSEntry 78 }
statAINFSSIPMsgREFERXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP REFER messages the reporting call agent
or feature server sent"
::= { statAINFSEntry 79 }
statAINFSSIPMsgREFERWREPLACESRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP REFER REPLACES messages the reporting
call agent or feature server received"
::= { statAINFSEntry 80 }
statAINFSSIPMsgINVITEREPLACESXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting
call agent or feature server sent"
::= { statAINFSEntry 81 }
statAINFSSIPMsgINVITEREPLACESRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting
call agent or feature server received"
::= { statAINFSEntry 82 }
statAINFSSIPMsgREL100Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting
call agent or feature server received"
::= { statAINFSEntry 83 }
statAINFSSIPMsgREL100Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting
call agent or feature server sent"
::= { statAINFSEntry 84 }
statAINFSSIPMsgUNSUPPORTEDRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of unsupported SIP messages the reporting
call agent or feature server received"
::= { statAINFSEntry 85 }
statAINSVCTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatAINSVCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AIN Feature Service related statistics."
::= { fsAinStatistics 2 }
statAINSVCEntry OBJECT-TYPE
SYNTAX StatAINSVCEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for AIN Feature Service related Statistics
Table."
INDEX { statAINSVCComponentID }
::= { statAINSVCTable 1 }
StatAINSVCEntry ::= SEQUENCE {
statAINSVCComponentID DisplayString,
statAINSVCDOW DayOfWeek,
statAINSVCTOD TimeOfDay,
statAINSVCSisTotalIncomMsg Counter32,
statAINSVCSisTotalSuccIncomMsg Counter32,
statAINSVCSisTotalOutgMsgAttmp Counter32,
statAINSVCSisTotalSuccoutgMsg Counter32,
statAINSVCSisReqRetranRx Counter32,
statAINSVCSisReqRetranTx Counter32,
statAINSVCSisRspRetranRx Counter32,
statAINSVCSisRspRetranTx Counter32,
statAINSVCSisT1TimerExpired Counter32,
statAINSVCSisT2TimerReached Counter32,
statAINSVCSisInviteRx Counter32,
statAINSVCSisInviteTx Counter32,
statAINSVCSisCancelRx Counter32,
statAINSVCSisCancelTx Counter32,
statAINSVCSisByeRx Counter32,
statAINSVCSisByeTx Counter32,
statAINSVCSisAckRx Counter32,
statAINSVCSisAckTx Counter32,
statAINSVCSisOptionsRx Counter32,
statAINSVCSisOptionsTx Counter32,
statAINSVCSisRegisterRx Counter32,
statAINSVCSisRegisterTx Counter32,
statAINSVCSisInfoRx Counter32,
statAINSVCSisInfoTx Counter32,
statAINSVCSisNotifyRx Counter32,
statAINSVCSisNotifyTx Counter32,
statAINSVCSis100Rx Counter32,
statAINSVCSis100Tx Counter32,
statAINSVCSis18xRx Counter32,
statAINSVCSis18xTx Counter32,
statAINSVCSis200Rx Counter32,
statAINSVCSis200Tx Counter32,
statAINSVCSis3xxRx Counter32,
statAINSVCSis3xxTx Counter32,
statAINSVCSis4xxRx Counter32,
statAINSVCSis4xxTx Counter32,
statAINSVCSis5xxRx Counter32,
statAINSVCSis5xxTx Counter32,
statAINSVCSis6xxRx Counter32,
statAINSVCSis6xxTx Counter32,
statAINSVCSis7xxRx Counter32,
statAINSVCSis7xxTx Counter32,
statAINSVCSisProvRspRetranRx Counter32,
statAINSVCSisProvRspRetranTx Counter32,
statAINSVCSisPrackRx Counter32,
statAINSVCSisPrackTx Counter32,
statAINSVCSisSubscribeRx Counter32,
statAINSVCSisSubscribeTx Counter32,
statAINSVCSisReferRx Counter32,
statAINSVCSisReferTx Counter32,
statAINSVCSisReferWReplacesRx Counter32,
statAINSVCSisInviteReplacesTx Counter32,
statAINSVCSisInviteReplacesRx Counter32,
statAINSVCSisRel100Rx Counter32,
statAINSVCSisRel100Tx Counter32,
statAINSVCSisUnsupportedRx Counter32,
statAINSVCSisUpdateRx Counter32,
statAINSVCSisUpdateTx Counter32,
statAINSVCAinsvcTotalQuery Counter32,
statAINSVCAinsvc8xxQuery Counter32,
statAINSVCAinsvcExt8xxQuery Counter32,
statAINSVCAinsvcExt8xxQuerySucc Counter32,
statAINSVCAinsvcExt8xxFailApp Counter32,
statAINSVCAinsvcExt8xxFailNetw Counter32,
statAINSVCAinsvcLoc8xxQuery Counter32,
statAINSVCAinsvcLoc8xxQuerySucc Counter32,
statAINSVCAinsvcLoc8xxAniBlock Counter32,
statAINSVCAinsvcLoc8xxIiBlock Counter32,
statAINSVCAinsvcLoc8xxDnisSucc Counter32,
statAINSVCAinsvcLoc8xxRoutingSucc Counter32,
statAINSVCAinsvcLoc8xxReroute Counter32,
statAINSVCAinsvcLoc8xxFailApp Counter32,
statAINSVCAinsvcTotalLnpQuery Counter32,
statAINSVCAinsvcExtLnpQuery Counter32,
statAINSVCAinsvcExtLnpQuerySucc Counter32,
statAINSVCAinsvcExtLnpFailApp Counter32,
statAINSVCAinsvcExtLnpFailNetw Counter32,
statAINSVCAinsvcExt8xxQueryFail Counter32,
statAINSVCAinsvcExtLnpQueryLrn Counter32,
statAINSVCAinsvcExtLnpQueryFail Counter32,
statAINSVCLocLNPQuery Counter32,
statAINSVCLocLNPQuerySucc Counter32,
statAINSVCLocLNPFailApp Counter32,
statAINSVCLocLNPQueryRNFound Counter32,
statAINSVCLocLNPQueryNoRN Counter32,
statAINSVCSecExtLNPQuery Counter32,
statAINSVCSecExtLNPQuerySucc Counter32,
statAINSVCSecExtLNPFailApp Counter32,
statAINSVCSecExtLNPFailNetw Counter32,
statAINSVCSecExtLNPQueryLrn Counter32,
statAINSVCSecExtLNPQueryFail Counter32,
statAINSVCCache8xxQuerySucc Counter32,
statAINSVCCache8xxQueryFail Counter32
}
statAINSVCComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIN SVC Component Identifier"
::= { statAINSVCEntry 1 }
statAINSVCDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statAINSVCEntry 2 }
statAINSVCTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statAINSVCEntry 3 }
statAINSVCSisTotalIncomMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or feature server attempted to receive"
::= { statAINSVCEntry 4 }
statAINSVCSisTotalSuccIncomMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or feature server successfully received"
::= { statAINSVCEntry 5 }
statAINSVCSisTotalOutgMsgAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or feature server attempted to send"
::= { statAINSVCEntry 6 }
statAINSVCSisTotalSuccoutgMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or feature server successfully sent"
::= { statAINSVCEntry 7 }
statAINSVCSisReqRetranRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP request retransmission messages the reporting call agent or feature server received"
::= { statAINSVCEntry 8 }
statAINSVCSisReqRetranTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP request retransmission messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 9 }
statAINSVCSisRspRetranRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP response retransmission messages the reporting call agent or feature server received"
::= { statAINSVCEntry 10 }
statAINSVCSisRspRetranTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP response retransmission messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 11 }
statAINSVCSisT1TimerExpired OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP T1 Timer expirations that occurred on the reporting call agent or feature server received over the collection interval"
::= { statAINSVCEntry 12 }
statAINSVCSisT2TimerReached OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP T2 Timer expirations that occurred on the reporting call agent or feature server received over the collection interval"
::= { statAINSVCEntry 13 }
statAINSVCSisInviteRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent or feature server received"
::= { statAINSVCEntry 14 }
statAINSVCSisInviteTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 15 }
statAINSVCSisCancelRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent or feature server received"
::= { statAINSVCEntry 16 }
statAINSVCSisCancelTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 17 }
statAINSVCSisByeRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP BYE messages the reporting call agent or feature server received"
::= { statAINSVCEntry 18 }
statAINSVCSisByeTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP BYE messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 19 }
statAINSVCSisAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP ACK messages the reporting call agent or feature server received"
::= { statAINSVCEntry 20 }
statAINSVCSisAckTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP ACK messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 21 }
statAINSVCSisOptionsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent or feature server received"
::= { statAINSVCEntry 22 }
statAINSVCSisOptionsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 23 }
statAINSVCSisRegisterRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent or feature server received"
::= { statAINSVCEntry 24 }
statAINSVCSisRegisterTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 25 }
statAINSVCSisInfoRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INFO messages the reporting call agent or feature server received"
::= { statAINSVCEntry 26 }
statAINSVCSisInfoTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INFO messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 27 }
statAINSVCSisNotifyRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent or feature server received"
::= { statAINSVCEntry 28 }
statAINSVCSisNotifyTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 29 }
statAINSVCSis100Rx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting call agent or feature server received"
::= { statAINSVCEntry 30 }
statAINSVCSis100Tx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 31 }
statAINSVCSis18xRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the reporting call agent or feature server received"
::= { statAINSVCEntry 32 }
statAINSVCSis18xTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 33 }
statAINSVCSis200Rx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting call agent or feature server received"
::= { statAINSVCEntry 34 }
statAINSVCSis200Tx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 35 }
statAINSVCSis3xxRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting call agent or feature server received"
::= { statAINSVCEntry 36 }
statAINSVCSis3xxTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 37 }
statAINSVCSis4xxRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the reporting call agent or feature server received"
::= { statAINSVCEntry 38 }
statAINSVCSis4xxTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 39 }
statAINSVCSis5xxRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the reporting call agent or feature server received"
::= { statAINSVCEntry 40 }
statAINSVCSis5xxTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 41 }
statAINSVCSis6xxRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the reporting call agent or feature server received"
::= { statAINSVCEntry 42 }
statAINSVCSis6xxTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 43 }
statAINSVCSis7xxRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting call agent or feature server received"
::= { statAINSVCEntry 44 }
statAINSVCSis7xxTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 45 }
statAINSVCSisProvRspRetranRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP provisioning response retransmission messages the reporting call agent or feature server received"
::= { statAINSVCEntry 46 }
statAINSVCSisProvRspRetranTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP provisioning response retransmission messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 47 }
statAINSVCSisPrackRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent or feature server received"
::= { statAINSVCEntry 48 }
statAINSVCSisPrackTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 49 }
statAINSVCSisSubscribeRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call agent or feature server received"
::= { statAINSVCEntry 50 }
statAINSVCSisSubscribeTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 51 }
statAINSVCSisReferRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER messages the reporting call agent or feature server received"
::= { statAINSVCEntry 52 }
statAINSVCSisReferTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 53 }
statAINSVCSisReferWReplacesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER REPLACES messages the reporting call agent or feature server received"
::= { statAINSVCEntry 54 }
statAINSVCSisInviteReplacesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 55 }
statAINSVCSisInviteReplacesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting call agent or feature server received"
::= { statAINSVCEntry 56 }
statAINSVCSisRel100Rx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting call agent or feature server received"
::= { statAINSVCEntry 57 }
statAINSVCSisRel100Tx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 58 }
statAINSVCSisUnsupportedRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsupported SIP messages the reporting call agent or feature server received"
::= { statAINSVCEntry 59 }
statAINSVCSisUpdateRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP UPDATE messages the reporting call agent or feature server received"
::= { statAINSVCEntry 60 }
statAINSVCSisUpdateTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP UPDATE messages the reporting call agent or feature server sent"
::= { statAINSVCEntry 61 }
statAINSVCAinsvcTotalQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of queries attempted on the reporting feature server"
::= { statAINSVCEntry 62 }
statAINSVCAinsvc8xxQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries attempted on the reporting feature server"
::= { statAINSVCEntry 63 }
statAINSVCAinsvcExt8xxQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries that resulted in an external query to a network database attempted on the reporting feature server"
::= { statAINSVCEntry 64 }
statAINSVCAinsvcExt8xxQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries that resulted in a successful external query to a network database attempted on the reporting feature server"
::= { statAINSVCEntry 65 }
statAINSVCAinsvcExt8xxFailApp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries that resulted in a failed external query to a network database due to an application failure from the reporting feature server"
::= { statAINSVCEntry 66 }
statAINSVCAinsvcExt8xxFailNetw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries that resulted in a failed external query to a network database due to a network communication failure from the reporting feature server"
::= { statAINSVCEntry 67 }
statAINSVCAinsvcLoc8xxQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries attempted to be processed locally on the reporting feature server"
::= { statAINSVCEntry 68 }
statAINSVCAinsvcLoc8xxQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries successfully processed locally on the reporting feature server"
::= { statAINSVCEntry 69 }
statAINSVCAinsvcLoc8xxAniBlock OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries that were blocked due to ANI screening processed locally on the reporting feature server"
::= { statAINSVCEntry 70 }
statAINSVCAinsvcLoc8xxIiBlock OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries that were blocked due to II screening processed locally on the reporting feature server"
::= { statAINSVCEntry 71 }
statAINSVCAinsvcLoc8xxDnisSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX DNIS translation queries successfully processed locally on the reporting feature server"
::= { statAINSVCEntry 72 }
statAINSVCAinsvcLoc8xxRoutingSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX routing translation queries successfully processed locally on the reporting feature server"
::= { statAINSVCEntry 73 }
statAINSVCAinsvcLoc8xxReroute OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries successfully processed locally on the reporting feature server that resulted in re-routing"
::= { statAINSVCEntry 74 }
statAINSVCAinsvcLoc8xxFailApp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX translation queries that resulted in a failure due to an application error on the reporting feature server"
::= { statAINSVCEntry 75 }
statAINSVCAinsvcTotalLnpQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LNP translation queries attempted on the reporting feature server"
::= { statAINSVCEntry 76 }
statAINSVCAinsvcExtLnpQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LNP translation queries that resulted in an external query to a network database attempted on the reporting feature server"
::= { statAINSVCEntry 77 }
statAINSVCAinsvcExtLnpQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LNP translation queries that resulted in a successful external query to a network database attempted on the reporting feature server"
::= { statAINSVCEntry 78 }
statAINSVCAinsvcExtLnpFailApp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LNP translation queries that resulted in a failed external query to a network database due to an application failure from the reporting feature server"
::= { statAINSVCEntry 79 }
statAINSVCAinsvcExtLnpFailNetw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LNP translation queries that resulted in a failed external query to a network database due to a network communication failure from the reporting feature server"
::= { statAINSVCEntry 80 }
statAINSVCAinsvcExt8xxQueryFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 8XX queries that failed due to an SCP timeout when attempted by the reporting feature server"
::= { statAINSVCEntry 85 }
statAINSVCAinsvcExtLnpQueryLrn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LNP queries that resulted in a successful response from the SCP with an LRN when attempted by the reporting feature server"
::= { statAINSVCEntry 86 }
statAINSVCAinsvcExtLnpQueryFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LNP queries that failed due to an SCP timeout when attempted by the reporting feature server"
::= { statAINSVCEntry 87 }
statAINSVCLocLNPQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an attempt was made to look up a DN in the local LNP database by the reporting feature server"
::= { statAINSVCEntry 88 }
statAINSVCLocLNPQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful attempts to look up a DN in the local LNP database by the reporting feature server"
::= { statAINSVCEntry 89 }
statAINSVCLocLNPFailApp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of failed attempts to look up a DN in the local LNP database by the reporting feature server"
::= { statAINSVCEntry 90 }
statAINSVCLocLNPQueryRNFound OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful attempts to look up a DN in the local LNP database by the reporting feature server that returned a corresponding RN"
::= { statAINSVCEntry 91 }
statAINSVCLocLNPQueryNoRN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful attempts to look up a DN in the local LNP database by the reporting feature server that did not return a corresponding RN"
::= { statAINSVCEntry 92 }
statAINSVCSecExtLNPQuery OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter will be incremented at the time of sending secondary LNP query request to TSA"
::= { statAINSVCEntry 93 }
statAINSVCSecExtLNPQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter will be incremented when the secondary query request for LNP results in a successful response from TSA"
::= { statAINSVCEntry 94 }
statAINSVCSecExtLNPFailApp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter will be incremented when the secondary query request for LNP results in a failure from the application"
::= { statAINSVCEntry 95 }
statAINSVCSecExtLNPFailNetw OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter will be incremented when the secondary query request for LNP results in a failure from the network"
::= { statAINSVCEntry 96 }
statAINSVCSecExtLNPQueryLrn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter will be incremented when the secondary query request for LNP does not return LRN"
::= { statAINSVCEntry 97 }
statAINSVCSecExtLNPQueryFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter will be incremented when the secondary query request for LNP results in a failure"
::= { statAINSVCEntry 98 }
statAINSVCCache8xxQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shows the number of records successfully found in 8xx_cache table. The counter is incremented for every successful search in 8xx_cache table"
::= { statAINSVCEntry 99 }
statAINSVCCache8xxQueryFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter shows the number of unsuccessful searches in 8xx_cache table. The counter is incremented for every unsuccessful search in 8xx_cache table"
::= { statAINSVCEntry 100 }
statINAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatINAPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"INAP related protocol statistics."
::= { fsAinStatistics 3 }
statINAPEntry OBJECT-TYPE
SYNTAX StatINAPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row description for INAP related protocol statistics Table."
INDEX { statINAPComponentID }
::= { statINAPTable 1 }
StatINAPEntry ::= SEQUENCE {
statINAPComponentID DisplayString,
statINAPDOW DayOfWeek,
statINAPTOD TimeOfDay,
statINAPCancelRx Counter32,
statINAPCancelTx Counter32,
statINAPUnrecogInvokeIdRx Counter32,
statINAPUnrecogInvokeIdTx Counter32,
statINAPDatabseErrRx Counter32,
statINAPDatabaseErrTx Counter32,
statINAPEtcFailRx Counter32,
statINAPEtcFailTx Counter32,
statINAPImpropCallerRspRx Counter32,
statINAPImpropCallerRspTx Counter32,
statINAPInfoKeyErrRx Counter32,
statINAPInfoKeyErrTx Counter32,
statINAPMissingCustRecRx Counter32,
statINAPMissingCustRecTx Counter32,
statINAPMissingParmRx Counter32,
statINAPMissingParmTx Counter32,
statINAPParmOutOfRangeRx Counter32,
statINAPParmOutOfRangeTx Counter32,
statINAPReferralRx Counter32,
statINAPReferralTx Counter32,
statINAPReqInfoRx Counter32,
statINAPReqInfoTx Counter32,
statINAPSysFailRx Counter32,
statINAPSysFailTx Counter32,
statINAPTaskRefusedRx Counter32,
statINAPTaskRefusedTx Counter32,
statINAPUnavilRsrcRx Counter32,
statINAPUnavilRsrcTx Counter32,
statINAPUnexpectCompSeqRx Counter32,
statINAPUnexpectCompSeqTx Counter32,
statINAPUnexpectDataValRx Counter32,
statINAPUnexpectDataValTx Counter32,
statINAPUnexpectParmRx Counter32,
statINAPUnexpectParmTx Counter32,
statINAPUnknownLegIdRx Counter32,
statINAPUnknownLegIdTx Counter32,
statINAPUnknownRsrcRx Counter32,
statINAPUnknownRsrcTx Counter32,
statINAPReportErrRx Counter32,
statINAPReportErrTx Counter32,
statINAPNumChannelBusy Counter32,
statINAPNumRsrcNotAvail Counter32,
statINAPNumRsrcNotSupp Counter32,
statINAPNumTaskRefused Counter32,
statINAPNumInvalidCallerRsp Counter32,
statINAPNumCapabFail Counter32,
statINAPNumSupplSvcInvoke Counter32,
statINAPNumSendRscrCancel Counter32,
statINAPNumTempFail Counter32,
statINAPNumIpTmo Counter32,
statINAPNumUnauthReq Counter32,
statINAPNumUnauthDest Counter32,
statINAPNumProcedErr Counter32
}
statINAPComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"INAP Component Identifier"
::= { statINAPEntry 1 }
statINAPDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Day of week statistics was collected."
::= { statINAPEntry 2 }
statINAPTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statINAPEntry 3 }
statINAPCancelRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of cancels messages received by the reporting feature server"
::= { statINAPEntry 4 }
statINAPCancelTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of cancels messages transmitted by the reporting feature server"
::= { statINAPEntry 5 }
statINAPUnrecogInvokeIdRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unrecognized invoke id messages received by the reporting feature server"
::= { statINAPEntry 6 }
statINAPUnrecogInvokeIdTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unrecognized invoke id messages sent by the reporting feature server"
::= { statINAPEntry 7 }
statINAPDatabseErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of database error messages received by the reporting feature server"
::= { statINAPEntry 8 }
statINAPDatabaseErrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of database error messages sent by the reporting feature server"
::= { statINAPEntry 9 }
statINAPEtcFailRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of etc failure messages received by the reporting feature server"
::= { statINAPEntry 10 }
statINAPEtcFailTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of etc failure messages sent by the reporting feature server"
::= { statINAPEntry 11 }
statINAPImpropCallerRspRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of improper caller response messages received by the reporting feature server"
::= { statINAPEntry 12 }
statINAPImpropCallerRspTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of improper caller response messages sent by the reporting feature server"
::= { statINAPEntry 13 }
statINAPInfoKeyErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of information key error messages received by the reporting feature server"
::= { statINAPEntry 14 }
statINAPInfoKeyErrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of information key error messages sent by the reporting feature server"
::= { statINAPEntry 15 }
statINAPMissingCustRecRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of missing customer record messages received by the reporting feature server"
::= { statINAPEntry 16 }
statINAPMissingCustRecTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of missing customer record messages sent by the reporting feature server"
::= { statINAPEntry 17 }
statINAPMissingParmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of missing parameter messages received by the reporting feature server"
::= { statINAPEntry 18 }
statINAPMissingParmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of missing parameter messages sent by the reporting feature server"
::= { statINAPEntry 19 }
statINAPParmOutOfRangeRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of parameter out of range messages received by the reporting feature server"
::= { statINAPEntry 20 }
statINAPParmOutOfRangeTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of parameter out of range messages sent by the reporting feature server"
::= { statINAPEntry 21 }
statINAPReferralRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of referral messages received by the reporting feature server"
::= { statINAPEntry 22 }
statINAPReferralTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of referral messages sent by the reporting feature server"
::= { statINAPEntry 23 }
statINAPReqInfoRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of request information messages received by the reporting feature server"
::= { statINAPEntry 24 }
statINAPReqInfoTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of request information messages sent by the reporting feature server"
::= { statINAPEntry 25 }
statINAPSysFailRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of system failure messages received by the reporting feature server"
::= { statINAPEntry 26 }
statINAPSysFailTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of system failure messages sent by the reporting feature server"
::= { statINAPEntry 27 }
statINAPTaskRefusedRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of task refused messages received by the reporting feature server"
::= { statINAPEntry 28 }
statINAPTaskRefusedTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of task refused messages sent by the reporting feature server"
::= { statINAPEntry 29 }
statINAPUnavilRsrcRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unavailable resource messages received by the reporting feature server"
::= { statINAPEntry 30 }
statINAPUnavilRsrcTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unavailable resource messages sent by the reporting feature server"
::= { statINAPEntry 31 }
statINAPUnexpectCompSeqRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unexpected component sequence messages received by the reporting feature server"
::= { statINAPEntry 32 }
statINAPUnexpectCompSeqTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unexpected component sequence messages sent by the reporting feature server"
::= { statINAPEntry 33 }
statINAPUnexpectDataValRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unexpected data value messages received by the reporting feature server"
::= { statINAPEntry 34 }
statINAPUnexpectDataValTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unexpected data value messages sent by the reporting feature server"
::= { statINAPEntry 35 }
statINAPUnexpectParmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unexpected parameter messages received by the reporting feature server"
::= { statINAPEntry 36 }
statINAPUnexpectParmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unexpected parameter messages sent by the reporting feature server"
::= { statINAPEntry 37 }
statINAPUnknownLegIdRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unknown leg id messages received by the reporting feature server"
::= { statINAPEntry 38 }
statINAPUnknownLegIdTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unknown leg id messages sent by the reporting feature server"
::= { statINAPEntry 39 }
statINAPUnknownRsrcRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unknown resource messages received by the reporting feature server"
::= { statINAPEntry 40 }
statINAPUnknownRsrcTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of unknown resource messages sent by the reporting feature server"
::= { statINAPEntry 41 }
statINAPReportErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of report error messages received by the reporting feature server"
::= { statINAPEntry 42 }
statINAPReportErrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of report error messages sent by the reporting feature server"
::= { statINAPEntry 43 }
statINAPNumChannelBusy OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times a channel busy situation occurred on the reporting feature server"
::= { statINAPEntry 44 }
statINAPNumRsrcNotAvail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times a resource not available situation occurred on the reporting feature server"
::= { statINAPEntry 45 }
statINAPNumRsrcNotSupp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times a resource not supported situation occurred on the reporting feature server"
::= { statINAPEntry 46 }
statINAPNumTaskRefused OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times a task refused situation occurred on the reporting feature server"
::= { statINAPEntry 47 }
statINAPNumInvalidCallerRsp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times an invalid caller response situation occurred on the reporting feature server"
::= { statINAPEntry 48 }
statINAPNumCapabFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times a capability failure situation occurred on the reporting feature server"
::= { statINAPEntry 49 }
statINAPNumSupplSvcInvoke OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times a supplementary service invoke situation occurred on the reporting feature server"
::= { statINAPEntry 50 }
statINAPNumSendRscrCancel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times a send to resource request cancelled situation occurred on the reporting feature server"
::= { statINAPEntry 51 }
statINAPNumTempFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times a temporary failure situation occurred on the reporting feature server"
::= { statINAPEntry 52 }
statINAPNumIpTmo OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times an IP timeout situation occurred on the reporting feature server"
::= { statINAPEntry 53 }
statINAPNumUnauthReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times an unauthorized request situation occurred on the reporting feature server"
::= { statINAPEntry 54 }
statINAPNumUnauthDest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times an unauthorized destination situation occurred on the reporting feature server"
::= { statINAPEntry 55 }
statINAPNumProcedErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of times a procedural error situation occurred on the reporting feature server"
::= { statINAPEntry 56 }
statTSATable OBJECT-TYPE
SYNTAX SEQUENCE OF StatTSAEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"TSA application related statistics."
::= { fsAinStatistics 4 }
statTSAEntry OBJECT-TYPE
SYNTAX StatTSAEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row description for TSA application related statistics Table."
INDEX { statTSAComponentID }
::= { statTSATable 1 }
StatTSAEntry ::= SEQUENCE {
statTSAComponentID DisplayString,
statTSADOW DayOfWeek,
statTSATOD TimeOfDay,
statTSAOperationReqRx Counter32,
statTSAOperationConfirmRx Counter32,
statTSAOperationIndRx Counter32,
statTSAComponentReqRx Counter32,
statTSAComponentConfirmRx Counter32,
statTSAComponentIndRx Counter32,
statTSADataIndRx Counter32,
statTSAUdataIndRx Counter32,
statTSADataReqRx Counter32,
statTSADelimiterReqRx Counter32,
statTSADelimiterIndRx Counter32,
statTSAOpenIndRx Counter32,
statTSAOpenConfirmRx Counter32,
statTSAStatusIndRx Counter32,
statTSADialogConfirmRx Counter32,
statTSACloseIndRx Counter32,
statTSAAbortIndRx Counter32,
statTSATcapBindConfirmRx Counter32,
statTSATcapStatConfirmRx Counter32,
statTSATcapNoticeIndRx Counter32,
statTSATcapStatIndRx Counter32,
statTSAInapNoticeIndRx Counter32,
statTSAInapStatIndRx Counter32,
statTSAInapStatConfirmRx Counter32,
statTSAInapBindConfirmRx Counter32
}
statTSAComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"TSA Component Identifier"
::= { statTSAEntry 1 }
statTSADOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Day of week statistics was collected."
::= { statTSAEntry 2 }
statTSATOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statTSAEntry 3 }
statTSAOperationReqRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of operation request messages received on the reporting feature server"
::= { statTSAEntry 4 }
statTSAOperationConfirmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of operation confirm messages received on the reporting feature server"
::= { statTSAEntry 5 }
statTSAOperationIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of operation indication messages received on the reporting feature server"
::= { statTSAEntry 6 }
statTSAComponentReqRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of component request messages received on the reporting feature server"
::= { statTSAEntry 7 }
statTSAComponentConfirmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of component confirm messages received on the reporting feature server"
::= { statTSAEntry 8 }
statTSAComponentIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of component indication messages received on the reporting feature server"
::= { statTSAEntry 9 }
statTSADataIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of data indication messages received on the reporting feature server"
::= { statTSAEntry 10 }
statTSAUdataIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of udata indication messages received on the reporting feature server"
::= { statTSAEntry 11 }
statTSADataReqRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of data request messages received on the reporting feature server"
::= { statTSAEntry 12 }
statTSADelimiterReqRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of delimiter request messages received on the reporting feature server"
::= { statTSAEntry 13 }
statTSADelimiterIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of delimiter indication messages received on the reporting feature server"
::= { statTSAEntry 14 }
statTSAOpenIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of open indication messages received on the reporting feature server"
::= { statTSAEntry 15 }
statTSAOpenConfirmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of open confirm messages received on the reporting feature server"
::= { statTSAEntry 16 }
statTSAStatusIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of status indication messages received on the reporting feature server"
::= { statTSAEntry 17 }
statTSADialogConfirmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of dialog confirm messages received on the reporting feature server"
::= { statTSAEntry 18 }
statTSACloseIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of close indication messages received on the reporting feature server"
::= { statTSAEntry 19 }
statTSAAbortIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of abort indication messages received on the reporting feature server"
::= { statTSAEntry 20 }
statTSATcapBindConfirmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of TCAP bind confirm messages received on the reporting feature server"
::= { statTSAEntry 21 }
statTSATcapStatConfirmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of TCAP statistics confirm messages received on the reporting feature server"
::= { statTSAEntry 22 }
statTSATcapNoticeIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of TCAP notice indication messages received on the reporting feature server"
::= { statTSAEntry 23 }
statTSATcapStatIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of TCAP statistics indication messages received on the reporting feature server"
::= { statTSAEntry 24 }
statTSAInapNoticeIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of INAP notice indication messages received on the reporting feature server"
::= { statTSAEntry 25 }
statTSAInapStatIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of INAP statistics indication messages received on the reporting feature server"
::= { statTSAEntry 26 }
statTSAInapStatConfirmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of INAP statistics confirm messages received on the reporting feature server"
::= { statTSAEntry 27 }
statTSAInapBindConfirmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of INAP bind confirm messages received on the reporting feature server"
::= { statTSAEntry 28 }
statAINToolsTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatAINToolsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Metrics related to invocations of the TollFree and LNP Query Verification Tools."
::= { fsAinStatistics 5 }
statAINToolsEntry OBJECT-TYPE
SYNTAX StatAINToolsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for metrics related to invocations of the TollFree and LNP Query
Verification Tools related statistics Table."
INDEX { statAINToolsComponentID }
::= { statAINToolsTable 1 }
StatAINToolsEntry ::= SEQUENCE {
statAINToolsComponentID DisplayString,
statAINToolsDOW DayOfWeek,
statAINToolsTOD TimeOfDay,
statAINToolsLNPQueryAttmp Counter32,
statAINToolsLNPQuerySucc Counter32,
statAINToolsTollfreeQueryAttmp Counter32,
statAINToolsTollfreeQuerySucc Counter32
}
statAINToolsComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AIN Tools Component Identifier"
::= { statAINToolsEntry 1 }
statAINToolsDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statAINToolsEntry 2 }
statAINToolsTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statAINToolsEntry 3 }
statAINToolsLNPQueryAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the reporting feature server received a request
to perform an LNP query from the QVT tool."
::= { statAINToolsEntry 4 }
statAINToolsLNPQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the reporting feature server received a
request to perform an LNP query from the QVT tool and completed it
successfully."
::= { statAINToolsEntry 5 }
statAINToolsTollfreeQueryAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the reporting feature server received a request
to perform a Toll Free query from the QVT tool."
::= { statAINToolsEntry 6 }
statAINToolsTollfreeQuerySucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the reporting feature server received a request
to perform a Toll Free query from the QVT tool and completed it successfully."
::= { statAINToolsEntry 7 }
statTCAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatTCAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TCAP related protocol statistics."
::= { fsStatistics 1 }
statTCAPEntry OBJECT-TYPE
SYNTAX StatTCAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for TCAP related protocol statistics Table."
INDEX { statTCAPComponentID }
::= { statTCAPTable 1 }
StatTCAPEntry ::= SEQUENCE {
statTCAPComponentID DisplayString,
statTCAPDOW DayOfWeek,
statTCAPTOD TimeOfDay,
statTCAPTotalMsgRcv Counter32,
statTCAPTotalMsgXmit Counter32,
statTCAPTotalUniMsgRcv Counter32,
statTCAPTotalUniMsgXmit Counter32,
statTCAPAbortMsgRcv Counter32,
statTCAPAbortMsgXmit Counter32,
statTCAPBeginMsgRcv Counter32,
statTCAPBeginMsgXmit Counter32,
statTCAPContMsgRcv Counter32,
statTCAPContMsgXmit Counter32,
statTCAPEndMsgRcv Counter32,
statTCAPEndMsgXmit Counter32,
statTCAPPermissQueryRcv Counter32,
statTCAPPermissQueryXmit Counter32,
statTCAPNoPermissQueryRcv Counter32,
statTCAPNoPermissQueryXmit Counter32,
statTCAPPermissConversRcv Counter32,
statTCAPPermissConversXmit Counter32,
statTCAPNoPermissConversRcv Counter32,
statTCAPNoPermissConversXmit Counter32,
statTCAPRspRcv Counter32,
statTCAPRspXmit Counter32,
statTCAPTotalCompRcv Counter32,
statTCAPTotalCompXmit Counter32,
statTCAPInvokeCompRcv Counter32,
statTCAPInvokeCompXmit Counter32,
statTCAPReturnResultCompRcv Counter32,
statTCAPReturnResultCompXmit Counter32,
statTCAPReturnErrCompRcv Counter32,
statTCAPReturnErrCompXmit Counter32,
statTCAPRejectCompRcv Counter32,
statTCAPRejectCompXmit Counter32,
statTCAPActTransactions Counter32,
statTCAPActInvocations Counter32,
statTCAPTransactionIdsInuse Counter32,
statTCAPTotalDroppedMsgRcv Counter32,
statTCAPUnrecogMsgTypeRcv Counter32,
statTCAPUnrecogMsgTypeXmit Counter32,
statTCAPIncorrectTransPortRcv Counter32,
statTCAPIncorrectTransPortXmit Counter32,
statTCAPBadStructTransPortRcv Counter32,
statTCAPBadStructTransPortXmit Counter32,
statTCAPUnrecogTransIdRcv Counter32,
statTCAPUnrecogTransIdXmit Counter32,
statTCAPRscrLimitRcv Counter32,
statTCAPRscrLimitXmit Counter32,
statTCAPTransPortPermRelRcv Counter32,
statTCAPTransPortPermRelXmit Counter32,
statTCAPUnrecogDialogPortIdRcv Counter32,
statTCAPUnrecogDialogPortIdXmit Counter32,
statTCAPBadStructDialogPortRcv Counter32,
statTCAPBadStructDialogPortXmit Counter32,
statTCAPMissingDialogPortRcv Counter32,
statTCAPMissingDialogPortXmit Counter32,
statTCAPInconsistDialogPortRcv Counter32,
statTCAPInconsistDialogPortXmit Counter32,
statTCAPUnrecogCompRcv Counter32,
statTCAPUnrecogCompXmit Counter32,
statTCAPIncorrectCompPortRcv Counter32,
statTCAPIncorrectCompPortXmit Counter32,
statTCAPBadStructCompPortRcv Counter32,
statTCAPBadStructCompPortXmit Counter32,
statTCAPDupInvokeIdRcv Counter32,
statTCAPDupInvokeIdXmit Counter32,
statTCAPUnrecogOpcodeRcv Counter32,
statTCAPUnrecogOpcodeXmit Counter32,
statTCAPIncorrectParamRcv Counter32,
statTCAPIncorrectParamXmit Counter32,
statTCAPUnrecogLinkIdRcv Counter32,
statTCAPUnrecogLinkIdXmit Counter32,
statTCAPInitRelRcv Counter32,
statTCAPInitRelXmit Counter32,
statTCAPUnexpectLinkRspRcv Counter32,
statTCAPUnexpectLinkRspXmit Counter32,
statTCAPUnexpectLinkOperRcv Counter32,
statTCAPUnexpectLinkOperXmit Counter32,
statTCAPUnrecogReInvokeIdRcv Counter32,
statTCAPUnrecogReInvokeIdXmit Counter32,
statTCAPUnexpectRrRcv Counter32,
statTCAPUnexpectRrXmit Counter32,
statTCAPIncorrectParamRrRcv Counter32,
statTCAPIncorrectParamRrXmit Counter32,
statTCAPUnrecogInvokeIdRcv Counter32,
statTCAPUnrecogInvokeIdXmit Counter32,
statTCAPUnexpectReRcv Counter32,
statTCAPUnexpectReXmit Counter32,
statTCAPIncorrectCompEncodeRcv Counter32,
statTCAPIncorrectCompEncodeXmit Counter32,
statTCAPInvokeRscrLimitProbRcv Counter32,
statTCAPInvokeRscrLimitProbXmit Counter32,
statTCAPUnrecogErrCodeRcv Counter32,
statTCAPUnrecogErrCodeXmit Counter32,
statTCAPUnexpectErrCodeRcv Counter32,
statTCAPUnexpectErrCodeXmit Counter32,
statTCAPIncorrectParamReRcv Counter32,
statTCAPIncorrectParamReXmit Counter32,
statTCAPOperationReqRcv Counter32,
statTCAPOperationConfirmRcv Counter32,
statTCAPOperationIndRcv Counter32,
statTCAPComponentReqRcv Counter32,
statTCAPComponentConfirmRcv Counter32,
statTCAPComponentIndRcv Counter32,
statTCAPDataIndRcv Counter32,
statTCAPUdataIndRcv Counter32,
statTCAPDataReqRcv Counter32,
statTCAPDelimiterReqRcv Counter32,
statTCAPDelimiterIndRcv Counter32,
statTCAPOpenIndRcv Counter32,
statTCAPOpenConfirmRcv Counter32,
statTCAPStatusIndRcv Counter32,
statTCAPDialogConfirmRcv Counter32,
statTCAPCloseIndRcv Counter32,
statTCAPAbortIndRcv Counter32,
statTCAPBindConfirmRcv Counter32,
statTCAPStatConfirmRcv Counter32,
statTCAPNoticeIndRcv Counter32,
statTCAPStatIndRcv Counter32
}
statTCAPComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TCAP Component Identifier"
::= { statTCAPEntry 1 }
statTCAPDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statTCAPEntry 2 }
statTCAPTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statTCAPEntry 3 }
statTCAPTotalMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received by the reporting feature server"
::= { statTCAPEntry 4 }
statTCAPTotalMsgXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages sent by the reporting feature server"
::= { statTCAPEntry 5 }
statTCAPTotalUniMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unidirectional messages received by the reporting feature server"
::= { statTCAPEntry 6 }
statTCAPTotalUniMsgXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unidirectional messages sent by the reporting feature server"
::= { statTCAPEntry 7 }
statTCAPAbortMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of abort messages received on the reporting feature server"
::= { statTCAPEntry 8 }
statTCAPAbortMsgXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of abort messages sent by the reporting feature server"
::= { statTCAPEntry 9 }
statTCAPBeginMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of begin messages received on the reporting feature server"
::= { statTCAPEntry 10 }
statTCAPBeginMsgXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of begin messages sent by the reporting feature server"
::= { statTCAPEntry 11 }
statTCAPContMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of continue messages received on the reporting feature server"
::= { statTCAPEntry 12 }
statTCAPContMsgXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of continue messages sent by the reporting feature server"
::= { statTCAPEntry 13 }
statTCAPEndMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of end messages received on the reporting feature server"
::= { statTCAPEntry 14 }
statTCAPEndMsgXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of end messages sent by the reporting feature server"
::= { statTCAPEntry 15 }
statTCAPPermissQueryRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of query with permission messages received on the reporting feature server"
::= { statTCAPEntry 16 }
statTCAPPermissQueryXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of query with permission messages sent by the reporting feature server"
::= { statTCAPEntry 17 }
statTCAPNoPermissQueryRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of query without permission messages received on the reporting feature server"
::= { statTCAPEntry 18 }
statTCAPNoPermissQueryXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of query without permission messages sent by the reporting feature server"
::= { statTCAPEntry 19 }
statTCAPPermissConversRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of conversation with permission messages received on the reporting feature server"
::= { statTCAPEntry 20 }
statTCAPPermissConversXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of conversation with permission messages sent by the reporting feature server"
::= { statTCAPEntry 21 }
statTCAPNoPermissConversRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of conversation without permission messages received on the reporting feature server"
::= { statTCAPEntry 22 }
statTCAPNoPermissConversXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of conversation without permission messages sent by the reporting feature server"
::= { statTCAPEntry 23 }
statTCAPRspRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of response messages received on the reporting feature server"
::= { statTCAPEntry 24 }
statTCAPRspXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of response messages sent by the reporting feature server"
::= { statTCAPEntry 25 }
statTCAPTotalCompRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of components received on the reporting feature server"
::= { statTCAPEntry 26 }
statTCAPTotalCompXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of components sent by the reporting feature server"
::= { statTCAPEntry 27 }
statTCAPInvokeCompRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invoke components received on the reporting feature server"
::= { statTCAPEntry 28 }
statTCAPInvokeCompXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invoke components sent by the reporting feature server"
::= { statTCAPEntry 29 }
statTCAPReturnResultCompRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of return-result components received on the reporting feature server"
::= { statTCAPEntry 30 }
statTCAPReturnResultCompXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of return-result components sent by the reporting feature server"
::= { statTCAPEntry 31 }
statTCAPReturnErrCompRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of return-error components received on the reporting feature server"
::= { statTCAPEntry 32 }
statTCAPReturnErrCompXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of return-error components sent by the reporting feature server"
::= { statTCAPEntry 33 }
statTCAPRejectCompRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of reject components received on the reporting feature server"
::= { statTCAPEntry 34 }
statTCAPRejectCompXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of reject components sent by the reporting feature server"
::= { statTCAPEntry 35 }
statTCAPActTransactions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of active transactions on the reporting feature server"
::= { statTCAPEntry 36 }
statTCAPActInvocations OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of active invocations on the reporting feature server"
::= { statTCAPEntry 37 }
statTCAPTransactionIdsInuse OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of transaction ids in use on the reporting feature server"
::= { statTCAPEntry 38 }
statTCAPTotalDroppedMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received messages dropped on the reporting feature server"
::= { statTCAPEntry 39 }
statTCAPUnrecogMsgTypeRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized messages types received on the reporting feature server"
::= { statTCAPEntry 40 }
statTCAPUnrecogMsgTypeXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized messages types sent by the reporting feature server"
::= { statTCAPEntry 41 }
statTCAPIncorrectTransPortRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect transaction portions received on the reporting feature server"
::= { statTCAPEntry 42 }
statTCAPIncorrectTransPortXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect transaction portions sent by the reporting feature server"
::= { statTCAPEntry 43 }
statTCAPBadStructTransPortRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of badly structured transaction portions received on the reporting feature server"
::= { statTCAPEntry 44 }
statTCAPBadStructTransPortXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of badly structured transaction portions sent by the reporting feature server"
::= { statTCAPEntry 45 }
statTCAPUnrecogTransIdRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized transaction ids received on the reporting feature server"
::= { statTCAPEntry 46 }
statTCAPUnrecogTransIdXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized transaction ids sent by the reporting feature server"
::= { statTCAPEntry 47 }
statTCAPRscrLimitRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of resource limitations received on the reporting feature server"
::= { statTCAPEntry 48 }
statTCAPRscrLimitXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of resource limitations sent by the reporting feature server"
::= { statTCAPEntry 49 }
statTCAPTransPortPermRelRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of transaction portion permission to release problems received on the reporting feature server"
::= { statTCAPEntry 50 }
statTCAPTransPortPermRelXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of transaction portion permission to release problems sent by the reporting feature server"
::= { statTCAPEntry 51 }
statTCAPUnrecogDialogPortIdRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized dialog portion ids received on the reporting feature server"
::= { statTCAPEntry 52 }
statTCAPUnrecogDialogPortIdXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized dialog portion ids sent by the reporting feature server"
::= { statTCAPEntry 53 }
statTCAPBadStructDialogPortRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of badly structured dialog portions received on the reporting feature server"
::= { statTCAPEntry 54 }
statTCAPBadStructDialogPortXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of badly structured dialog portions sent by the reporting feature server"
::= { statTCAPEntry 55 }
statTCAPMissingDialogPortRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of missing dialog portions received on the reporting feature server"
::= { statTCAPEntry 56 }
statTCAPMissingDialogPortXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of missing dialog portions sent by the reporting feature server"
::= { statTCAPEntry 57 }
statTCAPInconsistDialogPortRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inconsistent dialog portions received on the reporting feature server"
::= { statTCAPEntry 58 }
statTCAPInconsistDialogPortXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of inconsistent dialog portions sent by the reporting feature server"
::= { statTCAPEntry 59 }
statTCAPUnrecogCompRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized components received on the reporting feature server"
::= { statTCAPEntry 60 }
statTCAPUnrecogCompXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized components sent by the reporting feature server"
::= { statTCAPEntry 61 }
statTCAPIncorrectCompPortRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect component portions received on the reporting feature server"
::= { statTCAPEntry 62 }
statTCAPIncorrectCompPortXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect component portions sent by the reporting feature server"
::= { statTCAPEntry 63 }
statTCAPBadStructCompPortRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of badly structured component portions received on the reporting feature server"
::= { statTCAPEntry 64 }
statTCAPBadStructCompPortXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of badly structured component portions sent by the reporting feature server"
::= { statTCAPEntry 65 }
statTCAPDupInvokeIdRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of duplicate invoke ids received on the reporting feature server"
::= { statTCAPEntry 66 }
statTCAPDupInvokeIdXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of duplicate invoke ids sent by the reporting feature server"
::= { statTCAPEntry 67 }
statTCAPUnrecogOpcodeRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized opcodes received on the reporting feature server"
::= { statTCAPEntry 68 }
statTCAPUnrecogOpcodeXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized opcodes sent by the reporting feature server"
::= { statTCAPEntry 69 }
statTCAPIncorrectParamRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect parameters received on the reporting feature server"
::= { statTCAPEntry 70 }
statTCAPIncorrectParamXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect parameters sent by the reporting feature server"
::= { statTCAPEntry 71 }
statTCAPUnrecogLinkIdRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized link ids received on the reporting feature server"
::= { statTCAPEntry 72 }
statTCAPUnrecogLinkIdXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized link ids sent by the reporting feature server"
::= { statTCAPEntry 73 }
statTCAPInitRelRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of initiating releases received on the reporting feature server"
::= { statTCAPEntry 74 }
statTCAPInitRelXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of initiating releases sent by the reporting feature server"
::= { statTCAPEntry 75 }
statTCAPUnexpectLinkRspRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected link responses received on the reporting feature server"
::= { statTCAPEntry 76 }
statTCAPUnexpectLinkRspXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected link responses sent by the reporting feature server"
::= { statTCAPEntry 77 }
statTCAPUnexpectLinkOperRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected link operations received on the reporting feature server"
::= { statTCAPEntry 78 }
statTCAPUnexpectLinkOperXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected link operations sent by the reporting feature server"
::= { statTCAPEntry 79 }
statTCAPUnrecogReInvokeIdRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized invoke ids on return-error received on the reporting feature server"
::= { statTCAPEntry 80 }
statTCAPUnrecogReInvokeIdXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized invoke ids on return-error sent by the reporting feature server"
::= { statTCAPEntry 81 }
statTCAPUnexpectRrRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected return-results received on the reporting feature server"
::= { statTCAPEntry 82 }
statTCAPUnexpectRrXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected return-results sent by the reporting feature server"
::= { statTCAPEntry 83 }
statTCAPIncorrectParamRrRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect parameters on return-results received on the reporting feature server"
::= { statTCAPEntry 84 }
statTCAPIncorrectParamRrXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect parameters on return-results sent by the reporting feature server"
::= { statTCAPEntry 85 }
statTCAPUnrecogInvokeIdRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized invoke ids on return-results received on the reporting feature server"
::= { statTCAPEntry 86 }
statTCAPUnrecogInvokeIdXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized invoke ids on return results sent by the reporting feature server"
::= { statTCAPEntry 87 }
statTCAPUnexpectReRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected return error received on the reporting feature server"
::= { statTCAPEntry 88 }
statTCAPUnexpectReXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected return error sent by the reporting feature server"
::= { statTCAPEntry 89 }
statTCAPIncorrectCompEncodeRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect component encoding errors received on the reporting feature server"
::= { statTCAPEntry 90 }
statTCAPIncorrectCompEncodeXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect component encoding errors sent by the reporting feature server"
::= { statTCAPEntry 91 }
statTCAPInvokeRscrLimitProbRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of resource limitation invoke problems received on the reporting feature server"
::= { statTCAPEntry 92 }
statTCAPInvokeRscrLimitProbXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of resource limitation invoke problems sent by the reporting feature server"
::= { statTCAPEntry 93 }
statTCAPUnrecogErrCodeRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized error codes on return-error received on the reporting feature server"
::= { statTCAPEntry 94 }
statTCAPUnrecogErrCodeXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized error codes on return-error sent by the reporting feature server"
::= { statTCAPEntry 95 }
statTCAPUnexpectErrCodeRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected error codes on return-error received on the reporting feature server"
::= { statTCAPEntry 96 }
statTCAPUnexpectErrCodeXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected error codes on return-error sent by the reporting feature server"
::= { statTCAPEntry 97 }
statTCAPIncorrectParamReRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect parameters on return errors received on the reporting feature server"
::= { statTCAPEntry 98 }
statTCAPIncorrectParamReXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incorrect parameters on return errors sent by the reporting feature server"
::= { statTCAPEntry 99 }
statTCAPOperationReqRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of operation request messages received on the reporting feature server"
::= { statTCAPEntry 100 }
statTCAPOperationConfirmRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of operation confirm messages received on the reporting feature server"
::= { statTCAPEntry 101 }
statTCAPOperationIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of operation indication messages received on the reporting feature server"
::= { statTCAPEntry 102 }
statTCAPComponentReqRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of component request messages received on the reporting feature server"
::= { statTCAPEntry 103 }
statTCAPComponentConfirmRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of component confirm messages received on the reporting feature server"
::= { statTCAPEntry 104 }
statTCAPComponentIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of component indication messages received on the reporting feature server"
::= { statTCAPEntry 105 }
statTCAPDataIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data indication messages received on the reporting feature server"
::= { statTCAPEntry 106 }
statTCAPUdataIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of udata indication messages received on the reporting feature server"
::= { statTCAPEntry 107 }
statTCAPDataReqRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data request messages received on the reporting feature server"
::= { statTCAPEntry 108 }
statTCAPDelimiterReqRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of delimiter request messages received on the reporting feature server"
::= { statTCAPEntry 109 }
statTCAPDelimiterIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of delimiter indication messages received on the reporting feature server"
::= { statTCAPEntry 110 }
statTCAPOpenIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of open indication messages received on the reporting feature server"
::= { statTCAPEntry 111 }
statTCAPOpenConfirmRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of open confirm messages received on the reporting feature server"
::= { statTCAPEntry 112 }
statTCAPStatusIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of status indication messages received on the reporting feature server"
::= { statTCAPEntry 113 }
statTCAPDialogConfirmRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of dialog confirm messages received on the reporting feature server"
::= { statTCAPEntry 114 }
statTCAPCloseIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of close indication messages received on the reporting feature server"
::= { statTCAPEntry 115 }
statTCAPAbortIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of abort indication messages received on the reporting feature server"
::= { statTCAPEntry 116 }
statTCAPBindConfirmRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of TCAP bind confirm messages received on the reporting feature server"
::= { statTCAPEntry 117 }
statTCAPStatConfirmRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of TCAP statistics confirm messages received on the reporting feature server"
::= { statTCAPEntry 118 }
statTCAPNoticeIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of TCAP notice indication messages received on the reporting feature server"
::= { statTCAPEntry 119 }
statTCAPStatIndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of TCAP statistics indication messages received on the reporting feature server"
::= { statTCAPEntry 120 }
statSCCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatSCCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SCCP protocol related statistics."
::= { fsStatistics 2 }
statSCCPEntry OBJECT-TYPE
SYNTAX StatSCCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for SCCP protocol related statistics Table."
INDEX { statSCCPComponentID }
::= { statSCCPTable 1 }
StatSCCPEntry ::= SEQUENCE {
statSCCPComponentID DisplayString,
statSCCPDOW DayOfWeek,
statSCCPTOD TimeOfDay,
statSCCPNoTransAddrFail Counter32,
statSCCPNoTransSpecAddrFail Counter32,
statSCCPNetworkFail Counter32,
statSCCPNetworkCongestFail Counter32,
statSCCPSubsysFail Counter32,
statSCCPSubsysCongestFail Counter32,
statSCCPUnequipUserFail Counter32,
statSCCPHopCounterFail Counter32,
statSCCPSyntaxErr Counter32,
statSCCPUnknownFail Counter32,
statSCCPTotalUdataTx Counter32,
statSCCPTotalUdataSvcTx Counter32,
statSCCPTotalUdataRx Counter32,
statSCCPTotalUdataSvcRx Counter32,
statSCCPTotalExtUdataTx Counter32,
statSCCPTotalExtUdataSvcTx Counter32,
statSCCPTotalExtUdataRx Counter32,
statSCCPTotalExtUdataSvcRx Counter32,
statSCCPTotalLongUdataTx Counter32,
statSCCPTotalLongUdataSvcTx Counter32,
statSCCPTotalLongUdataRx Counter32,
statSCCPTotalLongUdataSvcRx Counter32,
statSCCPTotalMsg Counter32,
statSCCPTotalLocalMsg Counter32,
statSCCPTotalGlobalAddrTran Counter32,
statSCCPTotalClass0Tx Counter32,
statSCCPTotalClass1Tx Counter32,
statSCCPTotalClass0Rx Counter32,
statSCCPTotalClass1Rx Counter32,
statSCCPSubsysOosReqGrant Counter32,
statSCCPSubsysOosReqDeny Counter32,
statSCCPMsgTxBackupSubsys Counter32,
statSCCPUsapTotalClass0Tx Counter32,
statSCCPUsapTotalClass1Tx Counter32,
statSCCPUsapTotalClass0Rx Counter32,
statSCCPUsapTotalClass1Rx Counter32,
statSCCPNsapAllowMsgRx Counter32,
statSCCPNsapOosGrantRx Counter32,
statSCCPNsapOosReqRx Counter32,
statSCCPNsapProhibitRx Counter32,
statSCCPNsapStatTestRx Counter32,
statSCCPNsapCongestRx Counter32,
statSCCPNsapAllowMsgTx Counter32,
statSCCPNsapOosGrantTx Counter32,
statSCCPNsapOosReqTx Counter32,
statSCCPNsapProhibitTx Counter32,
statSCCPNsapStatTestTx Counter32,
statSCCPNsapCongestTx Counter32
}
statSCCPComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCCP Component Identifier"
::= { statSCCPEntry 1 }
statSCCPDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statSCCPEntry 2 }
statSCCPTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statSCCPEntry 3 }
statSCCPNoTransAddrFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"f routing errors due to no translation for address of such nature on the reporting feature server"
::= { statSCCPEntry 4 }
statSCCPNoTransSpecAddrFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing errors due to no translation for this specific address on the reporting feature server"
::= { statSCCPEntry 5 }
statSCCPNetworkFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing errors due to a network failure from the point code being unavailable on the reporting feature server"
::= { statSCCPEntry 6 }
statSCCPNetworkCongestFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing errors due to network congestion on the reporting feature server"
::= { statSCCPEntry 7 }
statSCCPSubsysFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing errors due to a subsystem failure on the reporting feature server"
::= { statSCCPEntry 8 }
statSCCPSubsysCongestFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing errors due to subsystem congestion on the reporting feature server"
::= { statSCCPEntry 9 }
statSCCPUnequipUserFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing errors due to an unequipped user on the reporting feature server"
::= { statSCCPEntry 10 }
statSCCPHopCounterFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing errors due to a hop counter violation on the reporting feature server"
::= { statSCCPEntry 11 }
statSCCPSyntaxErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of syntax errors on the reporting feature server"
::= { statSCCPEntry 12 }
statSCCPUnknownFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing errors due to an unknown reason on the reporting feature server"
::= { statSCCPEntry 13 }
statSCCPTotalUdataTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unit data sent on the reporting feature server"
::= { statSCCPEntry 14 }
statSCCPTotalUdataSvcTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unit data service sent on the reporting feature server"
::= { statSCCPEntry 15 }
statSCCPTotalUdataRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unit data received on the reporting feature server"
::= { statSCCPEntry 16 }
statSCCPTotalUdataSvcRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unit data service received on the reporting feature server"
::= { statSCCPEntry 17 }
statSCCPTotalExtUdataTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of extended unit data sent on the reporting feature server"
::= { statSCCPEntry 18 }
statSCCPTotalExtUdataSvcTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of extended unit data service sent on the reporting feature server"
::= { statSCCPEntry 19 }
statSCCPTotalExtUdataRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of extended unit data received on the reporting feature server"
::= { statSCCPEntry 20 }
statSCCPTotalExtUdataSvcRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of extended unit data service received on the reporting feature server"
::= { statSCCPEntry 21 }
statSCCPTotalLongUdataTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of long unit data sent on the reporting feature server"
::= { statSCCPEntry 22 }
statSCCPTotalLongUdataSvcTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of long unit data service sent on the reporting feature server"
::= { statSCCPEntry 23 }
statSCCPTotalLongUdataRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of long unit data received on the reporting feature server"
::= { statSCCPEntry 24 }
statSCCPTotalLongUdataSvcRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of long unit data service received on the reporting feature server"
::= { statSCCPEntry 25 }
statSCCPTotalMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages handled on the reporting feature server"
::= { statSCCPEntry 26 }
statSCCPTotalLocalMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages intended for local subsystems on the reporting feature server"
::= { statSCCPEntry 27 }
statSCCPTotalGlobalAddrTran OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages requiring global address translation on the reporting feature server"
::= { statSCCPEntry 28 }
statSCCPTotalClass0Tx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of class 0 messages sent on the reporting feature server"
::= { statSCCPEntry 29 }
statSCCPTotalClass1Tx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of class 1 messages sent on the reporting feature server"
::= { statSCCPEntry 30 }
statSCCPTotalClass0Rx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of class 0 messages received on the reporting feature server"
::= { statSCCPEntry 31 }
statSCCPTotalClass1Rx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of class 1 messages received on the reporting feature server"
::= { statSCCPEntry 32 }
statSCCPSubsysOosReqGrant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem out-of-service requests granted on the reporting feature server"
::= { statSCCPEntry 33 }
statSCCPSubsysOosReqDeny OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem out-of-service requests denied on the reporting feature server"
::= { statSCCPEntry 34 }
statSCCPMsgTxBackupSubsys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages sent to a backup subsystem on the reporting feature server"
::= { statSCCPEntry 35 }
statSCCPUsapTotalClass0Tx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of class 0 messages sent on the reporting feature server"
::= { statSCCPEntry 36 }
statSCCPUsapTotalClass1Tx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of class 1 messages sent on the reporting feature server"
::= { statSCCPEntry 37 }
statSCCPUsapTotalClass0Rx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of class 0 messages received on the reporting feature server"
::= { statSCCPEntry 38 }
statSCCPUsapTotalClass1Rx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of class 1 messages received on the reporting feature server"
::= { statSCCPEntry 39 }
statSCCPNsapAllowMsgRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem allowed messages received on the reporting feature server"
::= { statSCCPEntry 40 }
statSCCPNsapOosGrantRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem out-of-service grant messages received on the reporting feature server"
::= { statSCCPEntry 41 }
statSCCPNsapOosReqRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem out-of-service request messages received on the reporting feature server"
::= { statSCCPEntry 42 }
statSCCPNsapProhibitRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem prohibited messages received on the reporting feature server"
::= { statSCCPEntry 43 }
statSCCPNsapStatTestRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem status test messages received on the reporting feature server"
::= { statSCCPEntry 44 }
statSCCPNsapCongestRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem congested messages received on the reporting feature server"
::= { statSCCPEntry 45 }
statSCCPNsapAllowMsgTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem allowed messages sent on the reporting feature server"
::= { statSCCPEntry 46 }
statSCCPNsapOosGrantTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem out-of-service grant messages sent on the reporting feature server"
::= { statSCCPEntry 47 }
statSCCPNsapOosReqTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem out-of-service request messages sent on the reporting feature server"
::= { statSCCPEntry 48 }
statSCCPNsapProhibitTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem prohibited messages sent on the reporting feature server"
::= { statSCCPEntry 49 }
statSCCPNsapStatTestTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem status test messages sent on the reporting feature server"
::= { statSCCPEntry 50 }
statSCCPNsapCongestTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of subsystem congested messages sent on the reporting feature server"
::= { statSCCPEntry 51 }
statM3UATable OBJECT-TYPE
SYNTAX SEQUENCE OF StatM3UAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"M3UA signaling protocol related statistics."
::= { signalingAdapterStatistics 1 }
statM3UAEntry OBJECT-TYPE
SYNTAX StatM3UAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for M3UA signaling protocol related statistics Table."
INDEX { statM3UAComponentID, statM3UASgpId }
::= { statM3UATable 1 }
StatM3UAEntry ::= SEQUENCE {
statM3UAComponentID DisplayString,
statM3UADOW DayOfWeek,
statM3UATOD TimeOfDay,
statM3UASgpId DisplayString,
statM3UAErrTx Counter32,
statM3UAErrRx Counter32,
statM3UANotifyTx Counter32,
statM3UANotifyRx Counter32,
statM3UADunaRx Counter32,
statM3UADavaRx Counter32,
statM3UADaudTx Counter32,
statM3UASconTx Counter32,
statM3UASconRx Counter32,
statM3UADrstRx Counter32,
statM3UADupuRx Counter32,
statM3UAUpTx Counter32,
statM3UADownTx Counter32,
statM3UABeatTx Counter32,
statM3UABeatRx Counter32,
statM3UAUpAckRx Counter32,
statM3UADownAckRx Counter32,
statM3UABeatAckTx Counter32,
statM3UABeatAckRx Counter32,
statM3UAActiveTx Counter32,
statM3UAInactiveTx Counter32,
statM3UAActiveAckRx Counter32,
statM3UAInactiveAckRx Counter32,
statM3UADataTransTx Counter32,
statM3UADataTransRx Counter32,
statM3UADataBytesTx Counter32,
statM3UADataBytesRx Counter32,
statM3UAInvalidSctpSignals Counter32,
statM3UASinceLastResetAssoc Counter32,
statM3UAAssocFail Counter32,
statM3UASctpTxFail Counter32,
statM3UAMsgLengthErr Counter32,
statM3UANoMemoryErr Counter32,
statM3UAVersionErr Counter32,
statM3UAMsgClassErr Counter32,
statM3UAMsgTypeErr Counter32,
statM3UAStreamIdErr Counter32,
statM3UAUnexpectMsgErr Counter32,
statM3UAProtocolErr Counter32,
statM3UAParamValueErr Counter32,
statM3UAParamFieldErr Counter32,
statM3UAUnexpectParamErr Counter32,
statM3UANetworkAppearErr Counter32,
statM3UARoutingContextErr Counter32,
statM3UAMsgRxOtherErr Counter32
}
statM3UAComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"M3UA Component Identifier"
::= { statM3UAEntry 1 }
statM3UADOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statM3UAEntry 2 }
statM3UATOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statM3UAEntry 3 }
statM3UASgpId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the signaling gateway process that these counters are associated with."
::= { statM3UAEntry 4 }
statM3UAErrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of errors sent on the reporting signaling gateway process"
::= { statM3UAEntry 5 }
statM3UAErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of errors received on the reporting signaling gateway process"
::= { statM3UAEntry 6 }
statM3UANotifyTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NOTIFYs sent on the reporting signaling gateway process"
::= { statM3UAEntry 7 }
statM3UANotifyRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NOTIFYs received on the reporting signaling gateway process"
::= { statM3UAEntry 8 }
statM3UADunaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DUNAs received on the reporting signaling gateway process"
::= { statM3UAEntry 9 }
statM3UADavaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DAVAs received on the reporting signaling gateway process"
::= { statM3UAEntry 10 }
statM3UADaudTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DAUDs transmitted on the reporting signaling gateway process"
::= { statM3UAEntry 11 }
statM3UASconTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCONs sent on the reporting signaling gateway process"
::= { statM3UAEntry 12 }
statM3UASconRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCONs received on the reporting signaling gateway process"
::= { statM3UAEntry 13 }
statM3UADrstRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DRSTs received on the reporting signaling gateway process"
::= { statM3UAEntry 14 }
statM3UADupuRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DUPUs received on the reporting signaling gateway process"
::= { statM3UAEntry 15 }
statM3UAUpTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UPs sent on the reporting signaling gateway process"
::= { statM3UAEntry 16 }
statM3UADownTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DOWNs sent on the reporting signaling gateway process"
::= { statM3UAEntry 17 }
statM3UABeatTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BEATs sent on the reporting signaling gateway process"
::= { statM3UAEntry 18 }
statM3UABeatRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BEATs received on the reporting signaling gateway process"
::= { statM3UAEntry 19 }
statM3UAUpAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UP Acknowledges received on the reporting signaling gateway process"
::= { statM3UAEntry 20 }
statM3UADownAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DOWN Acknowledges received on the reporting signaling gateway process"
::= { statM3UAEntry 21 }
statM3UABeatAckTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BEAT Acknowledges sent on the reporting signaling gateway process"
::= { statM3UAEntry 22 }
statM3UABeatAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BEAT Acknowledges received on the reporting signaling gateway process"
::= { statM3UAEntry 23 }
statM3UAActiveTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ACTIVEs sent on the reporting signaling gateway process"
::= { statM3UAEntry 24 }
statM3UAInactiveTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ACTIVEs received on the reporting signaling gateway process"
::= { statM3UAEntry 25 }
statM3UAActiveAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ACTIVE Acknowledges received on the reporting signaling gateway process"
::= { statM3UAEntry 26 }
statM3UAInactiveAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INACTIVE Acknowledges received on the reporting signaling gateway process"
::= { statM3UAEntry 27 }
statM3UADataTransTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data transfers sent on the reporting signaling gateway process"
::= { statM3UAEntry 28 }
statM3UADataTransRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data transfers received on the reporting signaling gateway process"
::= { statM3UAEntry 29 }
statM3UADataBytesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data bytes sent on the reporting signaling gateway process"
::= { statM3UAEntry 30 }
statM3UADataBytesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data bytes received on the reporting signaling gateway process"
::= { statM3UAEntry 31 }
statM3UAInvalidSctpSignals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid SCTP signals on the reporting signaling gateway process"
::= { statM3UAEntry 32 }
statM3UASinceLastResetAssoc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCTP errors since last reset of association on the reporting signaling gateway process"
::= { statM3UAEntry 33 }
statM3UAAssocFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of association failures on the reporting signaling gateway process"
::= { statM3UAEntry 34 }
statM3UASctpTxFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCTP send failures on message processing errors on the reporting signaling gateway process"
::= { statM3UAEntry 35 }
statM3UAMsgLengthErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages of invalid length received on the reporting signaling gateway process"
::= { statM3UAEntry 36 }
statM3UANoMemoryErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of no memory for message errors on the reporting signaling gateway process"
::= { statM3UAEntry 37 }
statM3UAVersionErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of version errors on the reporting signaling gateway process"
::= { statM3UAEntry 38 }
statM3UAMsgClassErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of message class errors on the reporting signaling gateway process"
::= { statM3UAEntry 39 }
statM3UAMsgTypeErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of message type errors on the reporting signaling gateway process"
::= { statM3UAEntry 40 }
statM3UAStreamIdErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of stream id errors on the reporting signaling gateway process"
::= { statM3UAEntry 41 }
statM3UAUnexpectMsgErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected message errors on the reporting signaling gateway process"
::= { statM3UAEntry 42 }
statM3UAProtocolErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of protocol errors on the reporting signaling gateway process"
::= { statM3UAEntry 43 }
statM3UAParamValueErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of parameter value errors on the reporting signaling gateway process"
::= { statM3UAEntry 44 }
statM3UAParamFieldErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of parameter field errors on the reporting signaling gateway process"
::= { statM3UAEntry 45 }
statM3UAUnexpectParamErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected parameter errors on the reporting signaling gateway process"
::= { statM3UAEntry 46 }
statM3UANetworkAppearErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of network appearance errors on the reporting signaling gateway process"
::= { statM3UAEntry 47 }
statM3UARoutingContextErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing context errors on the reporting signaling gateway process"
::= { statM3UAEntry 48 }
statM3UAMsgRxOtherErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received with other errors on the reporting call agent or feature server"
::= { statM3UAEntry 49 }
statSUATable OBJECT-TYPE
SYNTAX SEQUENCE OF StatSUAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SUA signaling protocol related statistics."
::= { signalingAdapterStatistics 2 }
statSUAEntry OBJECT-TYPE
SYNTAX StatSUAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for SUA signaling protocol related statistics Table."
INDEX { statSUAComponentID, statSUASgpId }
::= { statSUATable 1 }
StatSUAEntry ::= SEQUENCE {
statSUAComponentID DisplayString,
statSUADOW DayOfWeek,
statSUATOD TimeOfDay,
statSUASgpId DisplayString,
statSUAErrTx Counter32,
statSUAErrRx Counter32,
statSUANotifyTx Counter32,
statSUANotifyRx Counter32,
statSUADunaRx Counter32,
statSUADavaRx Counter32,
statSUADaudTx Counter32,
statSUASconTx Counter32,
statSUASconRx Counter32,
statSUADrstRx Counter32,
statSUADupuRx Counter32,
statSUAUpTx Counter32,
statSUADownTx Counter32,
statSUABeatTx Counter32,
statSUABeatRx Counter32,
statSUAUpAckRx Counter32,
statSUADownAckRx Counter32,
statSUABeatAckTx Counter32,
statSUABeatAckRx Counter32,
statSUAActiveTx Counter32,
statSUAInactiveTx Counter32,
statSUAActiveAckRx Counter32,
statSUAInactiveAckRx Counter32,
statSUACldtTx Counter32,
statSUACldtRx Counter32,
statSUACldrTx Counter32,
statSUACldrRx Counter32,
statSUADataBytesTx Counter32,
statSUADataBytesRx Counter32,
statSUAInvalidSctpSignals Counter32,
statSUASinceLastResetAssoc Counter32,
statSUAAssocFail Counter32,
statSUASctpTxFail Counter32,
statSUAMsgInvalidLengthRx Counter32,
statSUANoMemoryFail Counter32,
statSUAVersionErr Counter32,
statSUAMsgClassErr Counter32,
statSUAMsgTypeErr Counter32,
statSUAStreamIdErr Counter32,
statSUAUnexpectMsgErr Counter32,
statSUAProtocolErr Counter32,
statSUAParamValueErr Counter32,
statSUAParamFieldErr Counter32,
statSUAUnexpectParamErr Counter32,
statSUANetworkAppearErr Counter32,
statSUARoutingContextErr Counter32
}
statSUAComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SUA Component Identifier"
::= { statSUAEntry 1 }
statSUADOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statSUAEntry 2 }
statSUATOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statSUAEntry 3 }
statSUASgpId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SGP ID"
::= { statSUAEntry 4 }
statSUAErrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of errors sent on the reporting signaling gateway process"
::= { statSUAEntry 5 }
statSUAErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of errors received on the reporting signaling gateway process"
::= { statSUAEntry 6 }
statSUANotifyTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NOTIFYs sent on the reporting signaling gateway process"
::= { statSUAEntry 7 }
statSUANotifyRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NOTIFYs received on the reporting signaling gateway process"
::= { statSUAEntry 8 }
statSUADunaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DUNAs received on the reporting signaling gateway process"
::= { statSUAEntry 9 }
statSUADavaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DAVAs received on the reporting signaling gateway process"
::= { statSUAEntry 10 }
statSUADaudTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DAUDs sent on the reporting signaling gateway process"
::= { statSUAEntry 11 }
statSUASconTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCONs sent on the reporting signaling gateway process"
::= { statSUAEntry 12 }
statSUASconRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCONs received on the reporting signaling gateway process"
::= { statSUAEntry 13 }
statSUADrstRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DRSTs received on the reporting signaling gateway process"
::= { statSUAEntry 14 }
statSUADupuRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DUPUs received on the reporting signaling gateway process"
::= { statSUAEntry 15 }
statSUAUpTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UPs sent on the reporting signaling gateway process"
::= { statSUAEntry 16 }
statSUADownTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DOWNs sent on the reporting signaling gateway process"
::= { statSUAEntry 17 }
statSUABeatTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BEATs sent on the reporting signaling gateway process"
::= { statSUAEntry 18 }
statSUABeatRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BEATs received on the reporting signaling gateway process"
::= { statSUAEntry 19 }
statSUAUpAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UP Acknowledges received on the reporting signaling gateway process"
::= { statSUAEntry 20 }
statSUADownAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DOWN Acknowledges received on the reporting signaling gateway process"
::= { statSUAEntry 21 }
statSUABeatAckTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BEAT Acknowledges sent on the reporting signaling gateway process"
::= { statSUAEntry 22 }
statSUABeatAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BEAT Acknowledges received on the reporting signaling gateway process"
::= { statSUAEntry 23 }
statSUAActiveTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ACTIVEs sent on the reporting signaling gateway process"
::= { statSUAEntry 24 }
statSUAInactiveTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ACTIVEs received on the reporting signaling gateway process"
::= { statSUAEntry 25 }
statSUAActiveAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ACTIVE Acknowledges received on the reporting signaling gateway process"
::= { statSUAEntry 26 }
statSUAInactiveAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INACTIVE Acknowledges received on the reporting signaling gateway process"
::= { statSUAEntry 27 }
statSUACldtTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CLDTs sent on the reporting signaling gateway process"
::= { statSUAEntry 28 }
statSUACldtRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CLDTs received on the reporting signaling gateway process"
::= { statSUAEntry 29 }
statSUACldrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CLDRs sent on the reporting signaling gateway process"
::= { statSUAEntry 30 }
statSUACldrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CLDRs received on the reporting signaling gateway process"
::= { statSUAEntry 31 }
statSUADataBytesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data bytes sent on the reporting signaling gateway process"
::= { statSUAEntry 32 }
statSUADataBytesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data bytes received on the reporting signaling gateway process"
::= { statSUAEntry 33 }
statSUAInvalidSctpSignals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid SCTP signals on the reporting signaling gateway process"
::= { statSUAEntry 34 }
statSUASinceLastResetAssoc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCTP errors since last reset of association on the reporting signaling gateway process"
::= { statSUAEntry 35 }
statSUAAssocFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of association failures on the reporting signaling gateway process"
::= { statSUAEntry 36 }
statSUASctpTxFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCTP send failures on message processing errors on the reporting signaling gateway process"
::= { statSUAEntry 37 }
statSUAMsgInvalidLengthRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages of invalid length received on the reporting signaling gateway process"
::= { statSUAEntry 38 }
statSUANoMemoryFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of no memory for message errors on the reporting signaling gateway process"
::= { statSUAEntry 39 }
statSUAVersionErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of version errors on the reporting signaling gateway process"
::= { statSUAEntry 40 }
statSUAMsgClassErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of message class errors on the reporting signaling gateway process"
::= { statSUAEntry 41 }
statSUAMsgTypeErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of message type errors on the reporting signaling gateway process"
::= { statSUAEntry 42 }
statSUAStreamIdErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of stream id errors on the reporting signaling gateway process"
::= { statSUAEntry 43 }
statSUAUnexpectMsgErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected message errors on the reporting signaling gateway process"
::= { statSUAEntry 44 }
statSUAProtocolErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of protocol errors on the reporting signaling gateway process"
::= { statSUAEntry 45 }
statSUAParamValueErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of parameter value errors on the reporting signaling gateway process"
::= { statSUAEntry 46 }
statSUAParamFieldErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of parameter field errors on the reporting signaling gateway process"
::= { statSUAEntry 47 }
statSUAUnexpectParamErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected parameter errors on the reporting signaling gateway process"
::= { statSUAEntry 48 }
statSUANetworkAppearErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of network appearance errors on the reporting signaling gateway process"
::= { statSUAEntry 49 }
statSUARoutingContextErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of routing context errors on the reporting signaling gateway process"
::= { statSUAEntry 50 }
statSCTPTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatSCTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SCTP signaling protocol related statistics."
::= { signalingAdapterStatistics 3 }
statSCTPEntry OBJECT-TYPE
SYNTAX StatSCTPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for SCTP signaling protocol related statistics Table."
INDEX { statSCTPComponentID, statSCTPSctpAssocId }
::= { statSCTPTable 1 }
StatSCTPEntry ::= SEQUENCE {
statSCTPComponentID DisplayString,
statSCTPDOW DayOfWeek,
statSCTPTOD TimeOfDay,
statSCTPSctpAssocId DisplayString,
statSCTPDataChunkRx Counter32,
statSCTPDataChunkRxSeqErr Counter32,
statSCTPDataChunkRxOrder Counter32,
statSCTPDataChunkRxUnorder Counter32,
statSCTPDataChunkTx Counter32,
statSCTPDataChunkTxOrder Counter32,
statSCTPDataChunkTxUnorder Counter32,
statSCTPDataChunkDiscard Counter32,
statSCTPDataChunkRetran Counter32,
statSCTPDataChunkTxBundle Counter32,
statSCTPDataChunkRxBundle Counter32,
statSCTPDataByteTx Counter32,
statSCTPDataByteRx Counter32,
statSCTPControlChunkTx Counter32,
statSCTPControlChunkRx Counter32,
statSCTPUlpTx Counter32,
statSCTPUlpReady Counter32,
statSCTPUlpRx Counter32,
statSCTPUlpQueue Counter32,
statSCTPSctpDatagTx Counter32,
statSCTPSctpDatagRx Counter32,
statSCTPInvalidDatagLength Counter32,
statSCTPPartialChunkErr Counter32,
statSCTPEmptyDatagErr Counter32,
statSCTPInvalidChecksum Counter32,
statSCTPInvalidVerifTag Counter32,
statSCTPOotb Counter32,
statSCTPInvalidStream Counter32,
statSCTPAssocCommLost Counter32,
statSCTPDestAddrFail Counter32,
statSCTPChunkOrderErr Counter32,
statSCTPEcneChunkRx Counter32,
statSCTPCwrChunkRx Counter32,
statSCTPUnknownChunkType Counter32,
statSCTPUnknownInitParam Counter32,
statSCTPInvalidCookieSig Counter32,
statSCTPExpiredCookieErr Counter32,
statSCTPStaleCookieErr Counter32,
statSCTPPeerRestartErr Counter32,
statSCTPUnorderDatagErr Counter32,
statSCTPV6AddrParamRx Counter32,
statSCTPInvalidStreamErrRx Counter32,
statSCTPMissingParamErrRx Counter32,
statSCTPStaleCookieErrRx Counter32,
statSCTPOutOfRscrErrRx Counter32,
statSCTPUnresolvAddrErrRx Counter32,
statSCTPUnrecogChunkErrRx Counter32,
statSCTPInvalidParamErrRx Counter32,
statSCTPUnrecogParamErrRx Counter32,
statSCTPNoUserDataErrRx Counter32,
statSCTPCookieInShutdownErrRx Counter32,
statSCTPChunkTooSmallErr Counter32,
statSCTPChuckTooLargeErr Counter32,
statSCTPMissingParamErr Counter32,
statSCTPNoSpaceIncomErr Counter32
}
statSCTPComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCTP Component Identifier"
::= { statSCTPEntry 1 }
statSCTPDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statSCTPEntry 2 }
statSCTPTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statSCTPEntry 3 }
statSCTPSctpAssocId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the sctp association that the measurement counter block is associated with."
::= { statSCTPEntry 4 }
statSCTPDataChunkRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data chunks received on the reporting sctp association"
::= { statSCTPEntry 5 }
statSCTPDataChunkRxSeqErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of out-of-sequence data chunks received on the reporting sctp association"
::= { statSCTPEntry 6 }
statSCTPDataChunkRxOrder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ordered data chunks received on the reporting sctp association"
::= { statSCTPEntry 7 }
statSCTPDataChunkRxUnorder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unordered data chunks received on the reporting sctp association"
::= { statSCTPEntry 8 }
statSCTPDataChunkTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data chunks sent on the reporting sctp association"
::= { statSCTPEntry 9 }
statSCTPDataChunkTxOrder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ordered data chunks sent on the reporting sctp association"
::= { statSCTPEntry 10 }
statSCTPDataChunkTxUnorder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unordered data chunks sent on the reporting sctp association"
::= { statSCTPEntry 11 }
statSCTPDataChunkDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received duplicate data chunks that were discarded on the reporting sctp association"
::= { statSCTPEntry 12 }
statSCTPDataChunkRetran OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data chunks that were retransmitted on the reporting sctp association"
::= { statSCTPEntry 13 }
statSCTPDataChunkTxBundle OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bundled data chunks that were sent on the reporting sctp association"
::= { statSCTPEntry 14 }
statSCTPDataChunkRxBundle OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of bundled data chunks that were received on the reporting sctp association"
::= { statSCTPEntry 15 }
statSCTPDataByteTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data bytes sent over SCTP on the reporting sctp association"
::= { statSCTPEntry 16 }
statSCTPDataByteRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data bytes received over SCTP on the reporting sctp association"
::= { statSCTPEntry 17 }
statSCTPControlChunkTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of control chunks sent on the reporting sctp association"
::= { statSCTPEntry 18 }
statSCTPControlChunkRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of control chunks received on the reporting sctp association"
::= { statSCTPEntry 19 }
statSCTPUlpTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ULP datagrams sent on the reporting sctp association"
::= { statSCTPEntry 20 }
statSCTPUlpReady OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received datagrams that are ready to be sent to upper layer processes on the reporting sctp association"
::= { statSCTPEntry 21 }
statSCTPUlpRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received upper layer process datagrams on the reporting sctp association"
::= { statSCTPEntry 22 }
statSCTPUlpQueue OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of upper layer process datagrams queued to be transmitted on the reporting sctp association"
::= { statSCTPEntry 23 }
statSCTPSctpDatagTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of datagrams sent on the reporting sctp association"
::= { statSCTPEntry 24 }
statSCTPSctpDatagRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of datagrams received on the reporting sctp association"
::= { statSCTPEntry 25 }
statSCTPInvalidDatagLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of datagrams received with an invalid length on the reporting sctp association"
::= { statSCTPEntry 26 }
statSCTPPartialChunkErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of partial chunks that were received in a datagram on the reporting sctp association"
::= { statSCTPEntry 27 }
statSCTPEmptyDatagErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of datagrams received with no data chunks on the reporting sctp association"
::= { statSCTPEntry 28 }
statSCTPInvalidChecksum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCTP datagrams received with an invalid checksum on the reporting sctp association"
::= { statSCTPEntry 29 }
statSCTPInvalidVerifTag OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of datagrams with invalid verification tags received on the reporting sctp association"
::= { statSCTPEntry 31 }
statSCTPOotb OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of out of the blue packets received on the reporting sctp association"
::= { statSCTPEntry 32 }
statSCTPInvalidStream OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of datagrams with invalid stream ids received on the reporting sctp association"
::= { statSCTPEntry 33 }
statSCTPAssocCommLost OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the SCTP association communication was lost on the reporting sctp association"
::= { statSCTPEntry 34 }
statSCTPDestAddrFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times a destination address failed on the reporting sctp association"
::= { statSCTPEntry 35 }
statSCTPChunkOrderErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ordered chunks that were in error on the reporting sctp association"
::= { statSCTPEntry 36 }
statSCTPEcneChunkRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ECNE chunks received on the reporting sctp association"
::= { statSCTPEntry 37 }
statSCTPCwrChunkRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CWR chunks received on the reporting sctp association"
::= { statSCTPEntry 38 }
statSCTPUnknownChunkType OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of datagrams with an unknown chunk type received on the reporting sctp association"
::= { statSCTPEntry 39 }
statSCTPUnknownInitParam OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INIT datagrams with an unknown parameter received on the reporting sctp association"
::= { statSCTPEntry 40 }
statSCTPInvalidCookieSig OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid cookie signals received on the reporting sctp association"
::= { statSCTPEntry 41 }
statSCTPExpiredCookieErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times a cookie echo was received after the cookie timer expired on the reporting sctp association"
::= { statSCTPEntry 42 }
statSCTPStaleCookieErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times other endpoint indicates that the cookie echo was received after the cookie time expired on the reporting sctp association"
::= { statSCTPEntry 43 }
statSCTPPeerRestartErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the SCTP peer restarted on the reporting sctp association"
::= { statSCTPEntry 44 }
statSCTPUnorderDatagErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Not Used"
::= { statSCTPEntry 47 }
statSCTPV6AddrParamRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received with version 6 parameters on the reporting sctp association"
::= { statSCTPEntry 48 }
statSCTPInvalidStreamErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an SCTP peer reported receiving a data chunk on a non-existing stream on the reporting sctp association"
::= { statSCTPEntry 49 }
statSCTPMissingParamErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an INIT or INIT ACK was missing one or more mandatory parameters received on the reporting sctp association"
::= { statSCTPEntry 50 }
statSCTPStaleCookieErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an SCTP peer received a valid cookie that had expired on the reporting sctp association"
::= { statSCTPEntry 51 }
statSCTPOutOfRscrErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an SCTP peer reported it was out of resources on the reporting sctp association"
::= { statSCTPEntry 52 }
statSCTPUnresolvAddrErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an SCTP reported that it received a packet with an address it could not resolve on the reporting sctp association"
::= { statSCTPEntry 53 }
statSCTPUnrecogChunkErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an SCTP peer reported that it received a chunk that is could not understand on the reporting sctp association"
::= { statSCTPEntry 54 }
statSCTPInvalidParamErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an SCTP peer reported that it received an INIT or INIT ACK chunk containing one or more mandatory parameters that were set to an invalid value on the reporting sctp association"
::= { statSCTPEntry 55 }
statSCTPUnrecogParamErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an SCTP peer reported that it received an INIT ACK containing one or more parameters that were unrecognized on the reporting sctp association"
::= { statSCTPEntry 56 }
statSCTPNoUserDataErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an SCTP peer reported that it received a data chunk with no user data in it on the reporting sctp association"
::= { statSCTPEntry 57 }
statSCTPCookieInShutdownErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times an SCTP peer reported that is received a COOKIE ECHO while in the SHUTDOWN_ACK_SENT state on the reporting sctp association"
::= { statSCTPEntry 58 }
statSCTPChunkTooSmallErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data chunks received that were too small on the reporting sctp association"
::= { statSCTPEntry 59 }
statSCTPChuckTooLargeErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data chunks received that were too big on the reporting sctp association"
::= { statSCTPEntry 60 }
statSCTPMissingParamErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times that an INIT or INIT ACK chunk was received with one or more mandatory parameters missing on the reporting sctp association"
::= { statSCTPEntry 61 }
statSCTPNoSpaceIncomErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data chunks that were dropped due to no space being available in the local receive window on the reporting sctp association"
::= { statSCTPEntry 62 }
statIUATable OBJECT-TYPE
SYNTAX SEQUENCE OF StatIUAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ISDN User Adaption Layer related statistics"
::= { signalingAdapterStatistics 4 }
statIUAEntry OBJECT-TYPE
SYNTAX StatIUAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for ISDN User Adaption Layer related statistics Table."
INDEX { statIUAComponentID, statIUASctpAssocId }
::= { statIUATable 1 }
StatIUAEntry ::= SEQUENCE {
statIUAComponentID DisplayString,
statIUADOW DayOfWeek,
statIUATOD TimeOfDay,
statIUASctpAssocId DisplayString,
statIUAErrTx Counter32,
statIUAErrRx Counter32,
statIUANotifyRx Counter32,
statIUAUpTx Counter32,
statIUADownTx Counter32,
statIUABeatTx Counter32,
statIUABeatRx Counter32,
statIUAUpAckRx Counter32,
statIUADownAckRx Counter32,
statIUABeatAckTx Counter32,
statIUABeatAckRx Counter32,
statIUAActiveTx Counter32,
statIUAInactiveTx Counter32,
statIUAActiveAckRx Counter32,
statIUAInactiveAckRx Counter32,
statIUADataReqTx Counter32,
statIUADataIndRx Counter32,
statIUAEstReqTx Counter32,
statIUAEstCfmRx Counter32,
statIUAEstIndRx Counter32,
statIUARelReqTx Counter32,
statIUARelCfmRx Counter32,
statIUARelIndRx Counter32,
statIUADataBytesTx Counter32,
statIUADataBytesRx Counter32,
statIUAInvalidSctpSignalsTotal Counter32,
statIUAInvalidSctpSignalsSlr Counter32,
statIUAAssocFail Counter32,
statIUASctpTxFail Counter32,
statIUAVersionErr Counter32,
statIUAIntfIdErr Counter32,
statIUAMsgClassErr Counter32,
statIUAMsgTypeErr Counter32,
statIUAMsgLengthErr Counter32,
statIUAStreamIdErr Counter32,
statIUAUnexpectedMsgErr Counter32,
statIUAProtocolErr Counter32,
statIUAParamValueErr Counter32,
statIUAParamFieldErr Counter32,
statIUAUnexpectedParamErr Counter32,
statIUANoMemoryErr Counter32,
statIUATeiSapiErr Counter32,
statIUAMsgOtherErr Counter32
}
statIUAComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IUA Component Identifier"
::= { statIUAEntry 1 }
statIUADOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statIUAEntry 2 }
statIUATOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statIUAEntry 3 }
statIUASctpAssocId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id of the sctp association with which the measurement counter block is associated. This is not an incremental counter."
::= { statIUAEntry 4 }
statIUAErrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ERROR messages transmitted on the reporting sctp association."
::= { statIUAEntry 5 }
statIUAErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ERROR messages received on the reporting sctp association."
::= { statIUAEntry 6 }
statIUANotifyRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NOTIFY messages received on the reporting sctp association."
::= { statIUAEntry 7 }
statIUAUpTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ASP UP messages transmitted on the reporting sctp association."
::= { statIUAEntry 8 }
statIUADownTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ASP DOWN messages transmitted on the reporting sctp association."
::= { statIUAEntry 9 }
statIUABeatTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of HEART BEAT messages transmitted on the reporting sctp association."
::= { statIUAEntry 10 }
statIUABeatRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of HEART BEAT messages received on the reporting sctp association."
::= { statIUAEntry 11 }
statIUAUpAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ASP UP acknowledgement messages received on the reporting sctp association."
::= { statIUAEntry 12 }
statIUADownAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ASP DOWN acknowledgement messages received on the reporting sctp association."
::= { statIUAEntry 13 }
statIUABeatAckTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of HEART BEAT acknowledgement messages transmitted on the reporting sctp association."
::= { statIUAEntry 14 }
statIUABeatAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of HEART BEAT acknowledgement messages received on the reporting sctp association."
::= { statIUAEntry 15 }
statIUAActiveTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ASP ACTIVE messages transmitted on the reporting sctp association."
::= { statIUAEntry 16 }
statIUAInactiveTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ASP INACTIVE messages transmitted on the reporting sctp association."
::= { statIUAEntry 17 }
statIUAActiveAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ASP ACTIVE acknowledgement messages received on the reporting sctp association."
::= { statIUAEntry 18 }
statIUAInactiveAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ASP INACTIVE acknowledgement messages received on the reporting sctp association."
::= { statIUAEntry 19 }
statIUADataReqTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DATA REQUEST messages transmitted on the reporting sctp association."
::= { statIUAEntry 20 }
statIUADataIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DATA INDICATION messages received on the reporting sctp association."
::= { statIUAEntry 21 }
statIUAEstReqTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ESTABLISH REQUEST messages transmitted on the reporting sctp association."
::= { statIUAEntry 22 }
statIUAEstCfmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ESTABLISH CONFIRM messages received on the reporting sctp association."
::= { statIUAEntry 23 }
statIUAEstIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ESTABLISH INDICATION messages received on the reporting sctp association."
::= { statIUAEntry 24 }
statIUARelReqTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RELEASE REQUEST messages transmitted on the reporting sctp association."
::= { statIUAEntry 25 }
statIUARelCfmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RELEASE CONFIRM messages received on the reporting sctp association."
::= { statIUAEntry 26 }
statIUARelIndRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RELEASE INDICATION messages received on the reporting sctp association."
::= { statIUAEntry 27 }
statIUADataBytesTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data bytes transmitted on the reporting sctp association."
::= { statIUAEntry 28 }
statIUADataBytesRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of data bytes received on the reporting sctp association."
::= { statIUAEntry 29 }
statIUAInvalidSctpSignalsTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid SCTP signals received on the reporting sctp association"
::= { statIUAEntry 30 }
statIUAInvalidSctpSignalsSlr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid SCTP signals received since last reset of association on the reporting sctp association"
::= { statIUAEntry 31 }
statIUAAssocFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCTP association establishment failures on the reporting sctp association."
::= { statIUAEntry 32 }
statIUASctpTxFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCTP send failures on message processing errors on the reporting sctp association."
::= { statIUAEntry 33 }
statIUAVersionErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid version errors on the reporting sctp association."
::= { statIUAEntry 34 }
statIUAIntfIdErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid interface errors on the reporting sctp association."
::= { statIUAEntry 35 }
statIUAMsgClassErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid message class errors on the reporting sctp association."
::= { statIUAEntry 36 }
statIUAMsgTypeErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid message type errors on the reporting sctp association."
::= { statIUAEntry 37 }
statIUAMsgLengthErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of message length errors on the reporting gateway"
::= { statIUAEntry 38 }
statIUAStreamIdErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid stream identifier errors on the reporting sctp association."
::= { statIUAEntry 39 }
statIUAUnexpectedMsgErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected message errors on the reporting sctp association."
::= { statIUAEntry 40 }
statIUAProtocolErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of protocol errors on the reporting sctp association."
::= { statIUAEntry 41 }
statIUAParamValueErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of parameter value errors on the reporting sctp association."
::= { statIUAEntry 42 }
statIUAParamFieldErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of parameter field errors on the reporting sctp association."
::= { statIUAEntry 43 }
statIUAUnexpectedParamErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected parameter errors on the reporting sctp association."
::= { statIUAEntry 44 }
statIUANoMemoryErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of no memory errors on the reporting sctp association."
::= { statIUAEntry 45 }
statIUATeiSapiErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of invalid TEI or SAPI errors on the reporting sctp association."
::= { statIUAEntry 46 }
statIUAMsgOtherErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of other message errors on the reporting sctp association."
::= { statIUAEntry 47 }
statISUPTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatISUPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"ISUP Statistics."
::= { callAgentStatistics 2 }
statISUPEntry OBJECT-TYPE
SYNTAX StatISUPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row description for ISUP Table."
INDEX { statISUPComponentID }
::= { statISUPTable 1 }
StatISUPEntry ::= SEQUENCE {
statISUPComponentID DisplayString,
statISUPDOW DayOfWeek,
statISUPTOD TimeOfDay,
statISUPMsgIAMRcv Counter32,
statISUPMsgIAMXmit Counter32,
statISUPMsgACMRcv Counter32,
statISUPMsgACMXmit Counter32,
statISUPMsgANMRcv Counter32,
statISUPMsgANMXmit Counter32,
statISUPMsgRELRcv Counter32,
statISUPMsgRELXmit Counter32,
statISUPMsgRLCRcv Counter32,
statISUPMsgRLCXmit Counter32,
statISUPMsgBLORcv Counter32,
statISUPMsgBLOXmit Counter32,
statISUPMsgBLARcv Counter32,
statISUPMsgBLAXmit Counter32,
statISUPMsgCPGRcv Counter32,
statISUPMsgCPGXmit Counter32,
statISUPMsgCGBRcv Counter32,
statISUPMsgCGBXmit Counter32,
statISUPMsgUBARcv Counter32,
statISUPMsgUBAXmit Counter32,
statISUPMsgRSCRcv Counter32,
statISUPMsgRSCXmit Counter32,
statISUPMsgGRSRcv Counter32,
statISUPMsgGRSXmit Counter32,
statISUPMsgGRARcv Counter32,
statISUPMsgGRAXmit Counter32,
statISUPMsgUBLRcv Counter32,
statISUPMsgUBLXmit Counter32,
statISUPMsgCGBARcv Counter32,
statISUPMsgCGBAXmit Counter32,
statISUPMsgCGURcv Counter32,
statISUPMsgCGUXmit Counter32,
statISUPMsgCGUARcv Counter32,
statISUPMsgCGUAXmit Counter32,
statISUPMsgMSUXmit Counter32,
statISUPMsgMSURcv Counter32,
statISUPMsgMSUXmitRcv Counter32,
statISUPMsgMSU8Xmit Counter32,
statISUPMsgMSU8Rcv Counter32,
statISUPMsgMSU8XmitRcv Counter32,
statISUPMsgMSU8ReXmit Counter32,
statISUPMsgCVTRcv Counter32,
statISUPMsgCVTXmit Counter32,
statISUPMsgCVRRcv Counter32,
statISUPMsgCVRXmit Counter32
}
statISUPComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"ISUP Identifier"
::= { statISUPEntry 1 }
statISUPDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Day of week statistics was collected."
::= { statISUPEntry 2 }
statISUPTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statISUPEntry 3 }
statISUPMsgIAMRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP IAMs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 4 }
statISUPMsgIAMXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP IAMs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 5 }
statISUPMsgACMRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP ACMs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 6 }
statISUPMsgACMXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP ACMs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 7 }
statISUPMsgANMRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP ANMs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 8 }
statISUPMsgANMXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP ANMs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 9 }
statISUPMsgRELRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP RELs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 10 }
statISUPMsgRELXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP RELs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 11 }
statISUPMsgRLCRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP RLCs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 12 }
statISUPMsgRLCXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP RLCs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 13 }
statISUPMsgBLORcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP BLOs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 14 }
statISUPMsgBLOXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP BLOs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 15 }
statISUPMsgBLARcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP BLAs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 16 }
statISUPMsgBLAXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP BLAs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 17 }
statISUPMsgCPGRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CPGs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 18 }
statISUPMsgCPGXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CPGs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 19 }
statISUPMsgCGBRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CGBs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 20 }
statISUPMsgCGBXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CGBs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 21 }
statISUPMsgUBARcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP UBAs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 22 }
statISUPMsgUBAXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP UBAs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 23 }
statISUPMsgRSCRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP RSCs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 24 }
statISUPMsgRSCXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP RSCs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 25 }
statISUPMsgGRSRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP GRSs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 26 }
statISUPMsgGRSXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP GRSs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 27 }
statISUPMsgGRARcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP GRAs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 28 }
statISUPMsgGRAXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP GRAs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 29 }
statISUPMsgUBLRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP UBLs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 30 }
statISUPMsgUBLXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP UBLs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 31 }
statISUPMsgCGBARcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CGBAs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 32 }
statISUPMsgCGBAXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CGBAs transmitted via the SS7
link(s) by the reporting call agent"
::= { statISUPEntry 33 }
statISUPMsgCGURcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CGUs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 34 }
statISUPMsgCGUXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CGUs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 35 }
statISUPMsgCGUARcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CGUAs received via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 36 }
statISUPMsgCGUAXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CGUAs transmitted via the SS7 link(s)
by the reporting call agent"
::= { statISUPEntry 37 }
statISUPMsgMSUXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of message signal units transmitted via the
SS7 link(s) by the reporting call agent"
::= { statISUPEntry 38 }
statISUPMsgMSURcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of message signal units received via the
SS7 link(s) by the reporting call agent"
::= { statISUPEntry 39 }
statISUPMsgMSUXmitRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of message signal units transmitted and
received via the SS7 link(s) by the reporting call agent"
::= { statISUPEntry 40 }
statISUPMsgMSU8Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of message signal unit octets transmitted
via the SS7 link(s) by the reporting call agent"
::= { statISUPEntry 41 }
statISUPMsgMSU8Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of message signal unit octets received
via the SS7 link(s) by the reporting call agent"
::= { statISUPEntry 42 }
statISUPMsgMSU8XmitRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of message signal unit octets transmitted
and received via the SS7 link(s) by the reporting call agent"
::= { statISUPEntry 43 }
statISUPMsgMSU8ReXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of message signal unit octets retransmitted
via the SS7 link(s) by the reporting call agent"
::= { statISUPEntry 44 }
statISUPMsgCVTRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CVTs received via the SS7 link(s) by
the reporting call agent"
::= { statISUPEntry 45 }
statISUPMsgCVTXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CVTs transmitted via the
SS7 link(s) by the reporting call agent"
::= { statISUPEntry 46 }
statISUPMsgCVRRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CVRs received via the SS7 link(s) by
the reporting call agent"
::= { statISUPEntry 47 }
statISUPMsgCVRXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The total number of ISUP CVRs transmitted via the
SS7 link(s) by the reporting call agent"
::= { statISUPEntry 48 }
statCallProcessingTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatCallProcessingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Call Processing for Call Agent Statistics."
::= { callAgentStatistics 3 }
statCallProcessingEntry OBJECT-TYPE
SYNTAX StatCallProcessingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Call Processing Statistics Table."
INDEX { statCallProcComponentID }
::= { statCallProcessingTable 1 }
StatCallProcessingEntry ::= SEQUENCE {
statCallProcComponentID DisplayString,
statCallProcDOW DayOfWeek,
statCallProcTOD TimeOfDay,
statCallProcOrigAttemptTot Counter32,
statCallProcTermAttemptTot Counter32,
statCallProcOrigFailTot Counter32,
statCallProcTermFailTot Counter32,
statCallProcSuccCallsTot Counter32,
statCallProcAbandonedCallsTot Counter32,
statCallProcISDNOrigAttemptTot Counter32,
statCallProcISDNTermAttemptTot Counter32,
statCallProcISDNOrigFailTot Counter32,
statCallProcISDNTermFailTot Counter32,
statCallProcISDNSuccCallsTot Counter32,
statCallProcISDNAbandonedCallsTot Counter32,
statCallProcSS7OrigAttemptTot Counter32,
statCallProcSS7TermAttemptTot Counter32,
statCallProcSS7OrigFailTot Counter32,
statCallProcSS7TermFailTot Counter32,
statCallProcSS7SuccCallsTot Counter32,
statCallProcSS7AbandonedCallsTot Counter32,
statCallProcSIPOrigAttemptTot Counter32,
statCallProcSIPTermAttemptTot Counter32,
statCallProcSIPOrigFailTot Counter32,
statCallProcSIPTermFailTot Counter32,
statCallProcSIPSuccCallsTot Counter32,
statCallProcSIPAbandonedCallsTot Counter32,
statCallProcMGCPOrigAttemptTot Counter32,
statCallProcMGCPTermAttemptTot Counter32,
statCallProcMGCPOrigFailTot Counter32,
statCallProcMGCPTermFailTot Counter32,
statCallProcMGCPSuccCallsTot Counter32,
statCallProcMGCPAbandonedCallsTot Counter32,
statCallProcCASOrigAttemptTot Counter32,
statCallProcCASTermAttemptTot Counter32,
statCallProcCASOrigFailTot Counter32,
statCallProcCASTermFailTot Counter32,
statCallProcCASSuccCallsTot Counter32,
statCallProcCASAbandonedCallsTot Counter32,
statCallProcSuccISDNToSS7Tot Counter32,
statCallProcSuccISDNToISDNTot Counter32,
statCallProcSuccISDNToSIPTot Counter32,
statCallProcSuccISDNToMGCPTot Counter32,
statCallProcSuccISDNToCASTot Counter32,
statCallProcSuccSS7ToISDNTot Counter32,
statCallProcSuccSS7ToSS7Tot Counter32,
statCallProcSuccSS7ToSIPTot Counter32,
statCallProcSuccSS7ToMGCPTot Counter32,
statCallProcSuccSS7ToCASTot Counter32,
statCallProcSuccSIPToSS7Tot Counter32,
statCallProcSuccSIPToISDNTot Counter32,
statCallProcSuccSIPToSIPTot Counter32,
statCallProcSuccSIPToMGCPTot Counter32,
statCallProcSuccSIPToCASTot Counter32,
statCallProcSuccMGCPToSIPTot Counter32,
statCallProcSuccMGCPToISDNTot Counter32,
statCallProcSuccMGCPToSS7Tot Counter32,
statCallProcSuccMGCPToMGCPTot Counter32,
statCallProcSuccMGCPToCASTot Counter32,
statCallProcSuccCASToSIPTot Counter32,
statCallProcSuccCASToISDNTot Counter32,
statCallProcSuccCASToSS7Tot Counter32,
statCallProcSuccCASToMGCPTot Counter32,
statCallProcSuccCASToCASTot Counter32,
statCallProcInterlataAttemptTot Counter32,
statCallProcInterlataSuccTot Counter32,
statCallProcInterlataFailTot Counter32,
statCallProcInterlataAbandonTot Counter32,
statCallProcIntralataAttemptTot Counter32,
statCallProcIntralataSuccTot Counter32,
statCallProcIntralataFailTot Counter32,
statCallProcIntralataAbandonTot Counter32,
statCallProcIntlAttemptTot Counter32,
statCallProcIntlSuccTot Counter32,
statCallProcIntlFailTot Counter32,
statCallProcIntlAbandonTot Counter32,
statCallProcEmergencyAttemptTot Counter32,
statCallProcEmergencySuccTot Counter32,
statCallProcEmergencyFailTot Counter32,
statCallProcEmergencyAbandonTot Counter32,
statCallProcLocalAttemptTot Counter32,
statCallProcLocalSuccTot Counter32,
statCallProcLocalFailTot Counter32,
statCallProcLocalAbandonTot Counter32,
statCallProcTollfreeAttemptTot Counter32,
statCallProcTollfreeSuccTot Counter32,
statCallProcTollfreeFailTot Counter32,
statCallProcTollfreeAbandonTot Counter32,
statCallProcH323OrigAttempt Counter32,
statCallProcH323TermAttempt Counter32,
statCallProcH323OrigFail Counter32,
statCallProcH323TermFail Counter32,
statCallProcH323CallSucc Counter32,
statCallProcH323CallAbandon Counter32,
statCallProcISDNH323Call Counter32,
statCallProcSS7H323Call Counter32,
statCallProcSIPH323Call Counter32,
statCallProcMGCPH323Call Counter32,
statCallProcCASH323Call Counter32,
statCallProcH323SIPCall Counter32,
statCallProcH323ISDNCall Counter32,
statCallProcH323SS7Call Counter32,
statCallProcH323MGCPCall Counter32,
statCallProcH323CASCall Counter32,
statCallProcH323H323Call Counter32,
statCallProcNASAuthSucc Counter32,
statCallProcNASAuthFail Counter32,
statCallProcNASOpFail Counter32,
statCallProcNASISPPortLimit Counter32,
statCallProcNASNoModems Counter32,
statCallProcNASCLGUnacc Counter32,
statCallProcNASCLDUnacc Counter32,
statCallProcNASUserRequest Counter32,
statCallProcNASLostCarrier Counter32,
statCallProcNASLostService Counter32,
statCallProcNASIdleService Counter32,
statCallProcNASSessionTimeout Counter32,
statCallProcNASAdminReset Counter32,
statCallProcNASAdminReboot Counter32,
statCallProcNASPortError Counter32,
statCallProcNASNASError Counter32,
statCallProcNASNASRequest Counter32,
statCallProcNASNASReboot Counter32,
statCallProcNASPortUnneeded Counter32,
statCallProcNASPortPreempted Counter32,
statCallProcNASPortSuspended Counter32,
statCallProcNASServiceUnavail Counter32,
statCallProcNASCallback Counter32,
statCallProcNASUserError Counter32,
statCallProcNASHostRequest Counter32,
statCallProcIVRNetRequest Counter32,
statCallProcIVRNativeRequest Counter32,
statCallProcIVRResourceFail Counter32,
statCallProcTotalTDiskOrigAttempt Counter32,
statCallProcNLBTestSucc Counter32,
statCallProcNLBTestFail Counter32,
statCallProcT38FaxMediaSetupSucc Counter32,
statCallProcT38FaxMediaSetupFail Counter32,
statCallProcIVROperationFail Counter32,
statCallProcLBTestSucc Counter32,
statCallProcNCTTestFail Counter32,
statCallProcNCTTestSucc Counter32,
statCallProcTestRouteSucc Counter32,
statCallProcTddMediaSetupSucc Counter32,
statCallProcTddMediaSetupFail Counter32,
statCallProcModemMediaSetupSucc Counter32,
statCallProcModemMediaSetupFail Counter32,
statCallProcSipAsReferredTotal Counter32,
statCallProcSipAs302Total Counter32,
statCallProcSipAsReferredNewdn Counter32,
statCallProcOhdDialtoneTimeout Counter32,
statCallProcLnpRcvMisroutedPorted Counter32,
statCallProcLnpSndMisroutedPorted Counter32,
statCallProcLnpUnallocNumNoGap Counter32,
statCallProcLnpUnallocNumOwnLrn Counter32,
statCallProcOlmOffered Counter32,
statCallProcOlmAccept Counter32,
statCallProcOlmReject Counter32,
statCallProcOlmAcceptMcl0 Counter32,
statCallProcOlmAcceptMcl1 Counter32,
statCallProcOlmAcceptMcl2 Counter32,
statCallProcOlmAcceptMcl3 Counter32,
statCallProcOlmRejectMcl1 Counter32,
statCallProcOlmRejectMcl2 Counter32,
statCallProcOlmRejectMcl3 Counter32,
statCallProcOlmRejectMcl4 Counter32,
statCallProcOlmRejectEmergency Counter32,
statCallProcOlmMcl1Count Counter32,
statCallProcOlmMcl2Count Counter32,
statCallProcOlmMcl3Count Counter32,
statCallProcOlmMcl4Count Counter32,
statCallProcOlmIsupMsgDumped Counter32,
statCallProcSIPOrigCallAbandoned Counter32,
statCallProcSIPOrigCallNotAnswered Counter32,
statCallProcSIPOrigEndUserBusy Counter32,
statCallProcSIPTermCallAbandoned Counter32,
statCallProcSIPTermCallNotAnswered Counter32,
statCallProcSIPTermEndUserBusy Counter32,
statCallProcSIPTermSuccess Counter32,
statCallProcSIPOrigSuccess Counter32,
statCallProcOVLTxCount Counter32,
statCallProcOVLRxCount Counter32,
statCallProcTermWBListAllow Counter32,
statCallProcTermWBListBlock Counter32
}
statCallProcComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Call Processing Call Agent Identifier"
::= { statCallProcessingEntry 1 }
statCallProcDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statCallProcessingEntry 3 }
statCallProcTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statCallProcessingEntry 4 }
statCallProcOrigAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating call attempts of all types on the
reporting call agent"
::= { statCallProcessingEntry 5 }
statCallProcTermAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of terminating call attempts of all types on
the reporting call agent"
::= { statCallProcessingEntry 6 }
statCallProcOrigFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating call attempts of all types that
failed on the reporting call agent"
::= { statCallProcessingEntry 7 }
statCallProcTermFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of terminating call attempts of all types that
failed on the reporting call agent"
::= { statCallProcessingEntry 8 }
statCallProcSuccCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful originating and terminating call
attempts of all types on the reporting call agent"
::= { statCallProcessingEntry 9 }
statCallProcAbandonedCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating call attempts of all types that
were abandoned on the reporting call agent"
::= { statCallProcessingEntry 10 }
statCallProcISDNOrigAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating ISDN call attempts on the
reporting call agent"
::= { statCallProcessingEntry 11 }
statCallProcISDNTermAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN terminating call attempts on the
reporting call agent"
::= { statCallProcessingEntry 12 }
statCallProcISDNOrigFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN originating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 13 }
statCallProcISDNTermFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN terminating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 14 }
statCallProcISDNSuccCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful ISDN originating and terminating
call attempts on the reporting call agent"
::= { statCallProcessingEntry 15 }
statCallProcISDNAbandonedCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN originating call attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 16 }
statCallProcSS7OrigAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating SS7 call attempts on the reporting
call agent"
::= { statCallProcessingEntry 17 }
statCallProcSS7TermAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SS7 terminating call attempts on the reporting
call agent"
::= { statCallProcessingEntry 18 }
statCallProcSS7OrigFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SS7 originating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 19 }
statCallProcSS7TermFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SS7 terminating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 20 }
statCallProcSS7SuccCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful SS7 originating and terminating
call attempts on the reporting call agent"
::= { statCallProcessingEntry 21 }
statCallProcSS7AbandonedCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SS7 originating call attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 22 }
statCallProcSIPOrigAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating SIP call attempts on the reporting
call agent"
::= { statCallProcessingEntry 23 }
statCallProcSIPTermAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP terminating call attempts on the reporting
call agent"
::= { statCallProcessingEntry 24 }
statCallProcSIPOrigFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP originating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 25 }
statCallProcSIPTermFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP terminating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 26 }
statCallProcSIPSuccCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful SIP originating and terminating
call attempts on the reporting call agent"
::= { statCallProcessingEntry 27 }
statCallProcSIPAbandonedCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP originating call attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 28 }
statCallProcMGCPOrigAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating MGCP call attempts on the reporting
call agent"
::= { statCallProcessingEntry 29 }
statCallProcMGCPTermAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP terminating call attempts on the reporting
call agent"
::= { statCallProcessingEntry 30 }
statCallProcMGCPOrigFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP originating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 31 }
statCallProcMGCPTermFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP terminating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 32 }
statCallProcMGCPSuccCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful MGCP originating and terminating
call attempts on the reporting call agent"
::= { statCallProcessingEntry 33 }
statCallProcMGCPAbandonedCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MGCP originating call attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 34 }
statCallProcCASOrigAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating CAS call attempts on the reporting
call agent"
::= { statCallProcessingEntry 35 }
statCallProcCASTermAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CAS terminating call attempts on the reporting
call agent"
::= { statCallProcessingEntry 36 }
statCallProcCASOrigFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CAS originating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 37 }
statCallProcCASTermFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CAS terminating call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 38 }
statCallProcCASSuccCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful CAS originating and terminating
call attempts on the reporting call agent"
::= { statCallProcessingEntry 39 }
statCallProcCASAbandonedCallsTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CAS originating call attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 40 }
statCallProcSuccISDNToSS7Tot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an ISDN
originator to an SS7 terminator on the reporting call agent"
::= { statCallProcessingEntry 41 }
statCallProcSuccISDNToISDNTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an ISDN
originator to an ISDN terminator on the reporting call agent"
::= { statCallProcessingEntry 42 }
statCallProcSuccISDNToSIPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an ISDN
originator to an SIP terminator on the reporting call agent"
::= { statCallProcessingEntry 43 }
statCallProcSuccISDNToMGCPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an ISDN
originator to an MGCP terminator on the reporting call agent"
::= { statCallProcessingEntry 44 }
statCallProcSuccISDNToCASTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an ISDN
originator to an CAS terminator on the reporting call agent"
::= { statCallProcessingEntry 45 }
statCallProcSuccSS7ToISDNTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an SS7
originator to an SS7 terminator on the reporting call agent"
::= { statCallProcessingEntry 46 }
statCallProcSuccSS7ToSS7Tot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an SS7
originator to an ISDN terminator on the reporting call agent"
::= { statCallProcessingEntry 47 }
statCallProcSuccSS7ToSIPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an SS7
originator to an SIP terminator on the reporting call agent"
::= { statCallProcessingEntry 48 }
statCallProcSuccSS7ToMGCPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an SS7
originator to an MGCP terminator on the reporting call agent"
::= { statCallProcessingEntry 49 }
statCallProcSuccSS7ToCASTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an SS7
originator to an CAS terminator on the reporting call agent"
::= { statCallProcessingEntry 50 }
statCallProcSuccSIPToSS7Tot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from a SIP
originator to an SS7 terminator on the reporting call agent"
::= { statCallProcessingEntry 51 }
statCallProcSuccSIPToISDNTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from a SIP
originator to an ISDN terminator on the reporting call agent"
::= { statCallProcessingEntry 52 }
statCallProcSuccSIPToSIPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from a SIP
originator to an SIP terminator on the reporting call agent"
::= { statCallProcessingEntry 53 }
statCallProcSuccSIPToMGCPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from a SIP
originator to an MGCP terminator on the reporting call agent"
::= { statCallProcessingEntry 54 }
statCallProcSuccSIPToCASTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from a SIP
originator to an CAS terminator on the reporting call agent"
::= { statCallProcessingEntry 55 }
statCallProcSuccMGCPToSIPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an MGCP
originator to an SS7 terminator on the reporting call agent"
::= { statCallProcessingEntry 56 }
statCallProcSuccMGCPToISDNTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an MGCP
originator to an ISDN terminator on the reporting call agent"
::= { statCallProcessingEntry 57 }
statCallProcSuccMGCPToSS7Tot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an MGCP
originator to an SIP terminator on the reporting call agent"
::= { statCallProcessingEntry 58 }
statCallProcSuccMGCPToMGCPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an MGCP
originator to an MGCP terminator on the reporting call agent"
::= { statCallProcessingEntry 59 }
statCallProcSuccMGCPToCASTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an MGCP
originator to an CAS terminator on the reporting call agent"
::= { statCallProcessingEntry 60 }
statCallProcSuccCASToSIPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an CAS
originator to an SIP terminator on the reporting call agent"
::= { statCallProcessingEntry 61 }
statCallProcSuccCASToISDNTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an CAS
originator to an ISDN terminator on the reporting call agent"
::= { statCallProcessingEntry 62 }
statCallProcSuccCASToSS7Tot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an CAS
originator to an SS7 terminator on the reporting call agent"
::= { statCallProcessingEntry 63 }
statCallProcSuccCASToMGCPTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an CAS
originator to an MGCP terminator on the reporting call agent"
::= { statCallProcessingEntry 64 }
statCallProcSuccCASToCASTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successfully completed calls from an CAS
originator to an CAS terminator on the reporting call agent"
::= { statCallProcessingEntry 65 }
statCallProcInterlataAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Interlata call attempts on the reporting
call agent"
::= { statCallProcessingEntry 66 }
statCallProcInterlataSuccTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Interlata call attempts that completed
successfully on the reporting call agent"
::= { statCallProcessingEntry 67 }
statCallProcInterlataFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Interlata call attempts that failed on the
reporting call agent"
::= { statCallProcessingEntry 68 }
statCallProcInterlataAbandonTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Interlata call origination attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 69 }
statCallProcIntralataAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Intralata call attempts on the reporting
call agent"
::= { statCallProcessingEntry 70 }
statCallProcIntralataSuccTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Intralata call attempts that completed
successfully on the reporting call agent"
::= { statCallProcessingEntry 71 }
statCallProcIntralataFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Intralata call attempts that failed on the
reporting call agent"
::= { statCallProcessingEntry 72 }
statCallProcIntralataAbandonTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Intralata call origination attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 73 }
statCallProcIntlAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of International call attempts on the reporting
call agent"
::= { statCallProcessingEntry 74 }
statCallProcIntlSuccTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of International call attempts that completed
successfully on the reporting call agent"
::= { statCallProcessingEntry 75 }
statCallProcIntlFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of International call attempts that failed on the
reporting call agent"
::= { statCallProcessingEntry 76 }
statCallProcIntlAbandonTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of International call origination attempts that
were abandoned on the reporting call agent"
::= { statCallProcessingEntry 77 }
statCallProcEmergencyAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Emergency call attempts on the reporting
call agent"
::= { statCallProcessingEntry 78 }
statCallProcEmergencySuccTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Emergency call attempts that completed
successfully on the reporting call agent"
::= { statCallProcessingEntry 79 }
statCallProcEmergencyFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Emergency call attempts that failed on the
reporting call agent"
::= { statCallProcessingEntry 80 }
statCallProcEmergencyAbandonTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Emergency call origination attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 81 }
statCallProcLocalAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Local call attempts on the reporting call agent"
::= { statCallProcessingEntry 82 }
statCallProcLocalSuccTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Local call attempts that completed successfully
on the reporting call agent"
::= { statCallProcessingEntry 83 }
statCallProcLocalFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Local call attempts that failed on the
reporting call agent"
::= { statCallProcessingEntry 84 }
statCallProcLocalAbandonTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Local call origination attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 85 }
statCallProcTollfreeAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Toll Free call attempts on the reporting
call agent"
::= { statCallProcessingEntry 86 }
statCallProcTollfreeSuccTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Toll Free call attempts that completed
successfully on the reporting call agent"
::= { statCallProcessingEntry 87 }
statCallProcTollfreeFailTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Toll Free call attempts that failed on the
reporting call agent"
::= { statCallProcessingEntry 88 }
statCallProcTollfreeAbandonTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Toll Free call origination attempts that were
abandoned on the reporting call agent"
::= { statCallProcessingEntry 89 }
statCallProcH323OrigAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating H323 call attempts on the reporting
call agent"
::= { statCallProcessingEntry 90 }
statCallProcH323TermAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of terminating H323 call attempts on the reporting
call agent"
::= { statCallProcessingEntry 91 }
statCallProcH323OrigFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating H323 call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 92 }
statCallProcH323TermFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of terminating H323 call attempts that failed on
the reporting call agent"
::= { statCallProcessingEntry 93 }
statCallProcH323CallSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of originating and terminating H323 call attempts
that completed successfully on the reporting call agent"
::= { statCallProcessingEntry 94 }
statCallProcH323CallAbandon OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of terminating and originating H323 call attempts
that were abandoned on the reporting call agent"
::= { statCallProcessingEntry 95 }
statCallProcISDNH323Call OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from an ISDN
originator to an H323 terminator on the reporting call agent"
::= { statCallProcessingEntry 96 }
statCallProcSS7H323Call OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from an SS7
originator to an H323 terminator on the reporting call agent"
::= { statCallProcessingEntry 97 }
statCallProcSIPH323Call OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from a SIP
originator to an H323 terminator on the reporting call agent"
::= { statCallProcessingEntry 98 }
statCallProcMGCPH323Call OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from an MGCP
originator to an H323 terminator on the reporting call agent"
::= { statCallProcessingEntry 99 }
statCallProcCASH323Call OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from a CAS
originator to an H323 terminator on the reporting call agent"
::= { statCallProcessingEntry 100 }
statCallProcH323SIPCall OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from an H323
originator to a SIP terminator on the reporting call agent"
::= { statCallProcessingEntry 101 }
statCallProcH323ISDNCall OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from an H323
originator to an ISDN terminator on the reporting call agent"
::= { statCallProcessingEntry 102 }
statCallProcH323SS7Call OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from an H323
originator to an SS7 terminator on the reporting call agent"
::= { statCallProcessingEntry 103 }
statCallProcH323MGCPCall OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from an H323
originator to an MGCP terminator on the reporting call agent"
::= { statCallProcessingEntry 104 }
statCallProcH323CASCall OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from an H323
originator to a CAS terminator on the reporting call agent"
::= { statCallProcessingEntry 105 }
statCallProcH323H323Call OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls from an H323
originator to an H323 terminator on the reporting call agent"
::= { statCallProcessingEntry 106 }
statCallProcNASAuthSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful NAS Authentication Requests on
the reporting call agent"
::= { statCallProcessingEntry 107 }
statCallProcNASAuthFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of failed NAS Authentication Requests on
the reporting call agent"
::= { statCallProcessingEntry 108 }
statCallProcNASOpFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of operation failures that occurred on the
reporting call agent - typically indicative of a modem failure"
::= { statCallProcessingEntry 109 }
statCallProcNASISPPortLimit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAS calls that failed on the reporting
call agent due to the port limit of a modem being exceeded"
::= { statCallProcessingEntry 110 }
statCallProcNASNoModems OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAS calls that failed on the reporting
call agent due to the unavailability of a modem"
::= { statCallProcessingEntry 111 }
statCallProcNASCLGUnacc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAS calls that failed on the reporting
call agent due to the calling party number being blocked"
::= { statCallProcessingEntry 112 }
statCallProcNASCLDUnacc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAS calls that failed on the reporting
call agent due to the called party number being blocked"
::= { statCallProcessingEntry 113 }
statCallProcNASUserRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of User Requests - Reason Code 801 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 114 }
statCallProcNASLostCarrier OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Lost Carrier - Reason Code 802 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 115 }
statCallProcNASLostService OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Lost Service - Reason Code 803 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 116 }
statCallProcNASIdleService OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Idle Timeout - Reason Code 804 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 117 }
statCallProcNASSessionTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Session Timeout - Reason Code 805 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 118 }
statCallProcNASAdminReset OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Admin Reset - Reason Code 806 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 119 }
statCallProcNASAdminReboot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Admin Reset - Reason Code 806 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 120 }
statCallProcNASPortError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Port Error- Reason Code 808 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 121 }
statCallProcNASNASError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAS Error- Reason Code 809 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 122 }
statCallProcNASNASRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAS Request - Reason Code 810 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 123 }
statCallProcNASNASReboot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAS Reboot- Reason Code 811 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 124 }
statCallProcNASPortUnneeded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Port Unneeded - Reason Code 812 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 125 }
statCallProcNASPortPreempted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Port Pre-empted - Reason Code 813 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 126 }
statCallProcNASPortSuspended OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Port Suspended - Reason Code 814 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 127 }
statCallProcNASServiceUnavail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Service Unavailable - Reason Code
815 - that are received in the DLCX messages on the reporting
call agent"
::= { statCallProcessingEntry 128 }
statCallProcNASCallback OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAS Callback - Reason Code 816 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 129 }
statCallProcNASUserError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of User Error - Reason Code 817 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 130 }
statCallProcNASHostRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Host Request - Reason Code 818 - that
are received in the DLCX messages on the reporting call agent"
::= { statCallProcessingEntry 131 }
statCallProcIVRNetRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of requests for network based IVR service
on the reporting call agent"
::= { statCallProcessingEntry 132 }
statCallProcIVRNativeRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of requests for native IVR service on
the reporting call agent"
::= { statCallProcessingEntry 133 }
statCallProcIVRResourceFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IVR sessions that could not be
established on the reporting call agent"
::= { statCallProcessingEntry 134 }
statCallProcTotalTDiskOrigAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of origination attempts by subscribers that
are marked as temporarily disconnected, detected by the reporting call agent"
::= { statCallProcessingEntry 135 }
statCallProcNLBTestSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful NLB Tests completed by the reporting
call agent"
::= { statCallProcessingEntry 136 }
statCallProcNLBTestFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unsuccessful NLB Tests completed by the reporting
call agent. This counter includes both call setup failures and resource
failures"
::= { statCallProcessingEntry 137 }
statCallProcT38FaxMediaSetupSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when the T.38 media connection is established successfully between the endpoints for T.38 fax transmission."
::= { statCallProcessingEntry 138 }
statCallProcT38FaxMediaSetupFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when a T.38 media connection is not established successfully between the endpoints for T.38 fax transmission."
::= { statCallProcessingEntry 139 }
statCallProcIVROperationFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
::= { statCallProcessingEntry 140 }
statCallProcLBTestSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful TDM Loop Back 108 Tests completed by the reporting call agent."
::= { statCallProcessingEntry 141 }
statCallProcNCTTestFail
OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unsuccessful Network Continuity Tests completed by the reporting call agent. This counter includes both call setup failures and resource failures. These are test calls abnormally released by the call agent due to reasons such as resource priorities."
::= { statCallProcessingEntry 142 }
statCallProcNCTTestSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful Network Continuity Tests completed by the reporting call agent."
::= { statCallProcessingEntry 143 }
statCallProcTestRouteSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successful TDM Loop Back 108 Tests with DN dialed out in outgoing message completed by the reporting call agent."
::= { statCallProcessingEntry 144 }
statCallProcTddMediaSetupSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed calls of Call Type RELAY by the reporting call agent."
::= { statCallProcessingEntry 145 }
statCallProcTddMediaSetupFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of failed calls of Call Type RELAY that are abnormally released by the call agent due to reasons such as resource priority, by the reporting call agent. This is the result of resource or priority limitations."
::= { statCallProcessingEntry 146 }
statCallProcModemMediaSetupSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of successfully completed Modem calls by the reporting call agent."
::= { statCallProcessingEntry 147 }
statCallProcModemMediaSetupFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of failed Modem calls by the reporting call agent. This is the result of resource or priority limitations."
::= { statCallProcessingEntry 148 }
statCallProcSipAsReferredTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Application Server calls that were referred back."
::= { statCallProcessingEntry 149 }
statCallProcSipAs302Total OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Application Server calls that returned a 302 message."
::= { statCallProcessingEntry 150 }
statCallProcSipAsReferredNewdn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number calls to AppServer that came back with a new DN"
::= { statCallProcessingEntry 151 }
statCallProcOhdDialtoneTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times that the off hook delay trigger timed out."
::= { statCallProcessingEntry 152 }
statCallProcLnpRcvMisroutedPorted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LNP Data Inconsistencies with REL: the number of misrouted calls to a ported number (ANSI ISUP REL cause 26) reported by another exchange after an LNP query in the reporting call agent"
::= { statCallProcessingEntry 153 }
statCallProcLnpSndMisroutedPorted OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of misrouted calls to a ported number detected by the reporting call agent after an LNP query in the reporting call agent"
::= { statCallProcessingEntry 154 }
statCallProcLnpUnallocNumNoGap OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LNP Unallocated Number Calls: the number of calls resulting in an unallocated number indication in the donor switch reporting call agent, following an LNP query in this switch, or another switch as indicated by the Ported Number Translation indicator in the FCI parameter with no Ported Number GAP"
::= { statCallProcessingEntry 155 }
statCallProcLnpUnallocNumOwnLrn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LNP Data Inconsistencies: the number of LNP calls encountering an unallocated indication when the reporting call agent's own LRN has been detected after an LNP query in the donor switch, or in another switch as indicated by the Ported Number Translation indicator in the FCI parameter and the Ported Number GAP. This case does not apply to DNs marked as LNP-Reserved"
::= { statCallProcessingEntry 156 }
statCallProcOlmOffered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total calls offered to OLM"
::= { statCallProcessingEntry 157 }
statCallProcOlmAccept OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total calls accepted by OLM"
::= { statCallProcessingEntry 158 }
statCallProcOlmReject OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total calls rejected by OLM"
::= { statCallProcessingEntry 159 }
statCallProcOlmAcceptMcl0 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Calls accepted by OLM at MCL0"
::= { statCallProcessingEntry 160 }
statCallProcOlmAcceptMcl1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Calls accepted by OLM at MCL1"
::= { statCallProcessingEntry 161 }
statCallProcOlmAcceptMcl2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Calls accepted by OLM at MCL2"
::= { statCallProcessingEntry 162 }
statCallProcOlmAcceptMcl3 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Calls accepted by OLM at MCL3"
::= { statCallProcessingEntry 163 }
statCallProcOlmRejectMcl1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Calls rejected by OLM at MCL1"
::= { statCallProcessingEntry 164 }
statCallProcOlmRejectMcl2 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Calls rejected by OLM at MCL2"
::= { statCallProcessingEntry 165 }
statCallProcOlmRejectMcl3 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Calls rejected by OLM at MCL3"
::= { statCallProcessingEntry 166 }
statCallProcOlmRejectMcl4 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Calls rejected by OLM at MCL4"
::= { statCallProcessingEntry 167 }
statCallProcOlmRejectEmergency OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Emergency Calls rejected by OLM at MCL4"
::= { statCallProcessingEntry 168 }
statCallProcOlmMcl1Count OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of MCL1 occurrences"
::= { statCallProcessingEntry 169 }
statCallProcOlmMcl2Count OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of MCL2 occurrences"
::= { statCallProcessingEntry 170 }
statCallProcOlmMcl3Count OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of MCL3 occurrences"
::= { statCallProcessingEntry 171 }
statCallProcOlmMcl4Count OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of MCL4 occurrences"
::= { statCallProcessingEntry 172 }
statCallProcOlmIsupMsgDumped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ISUP messages dumped at MCL4 by layer3 (MIM) due to system overload"
::= { statCallProcessingEntry 173 }
statCallProcSIPOrigCallAbandoned OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming calls which got abandoned "
::= { statCallProcessingEntry 174 }
statCallProcSIPOrigCallNotAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming calls which are not answered by the called party"
::= { statCallProcessingEntry 175 }
statCallProcSIPOrigTermEndUserBusy OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming calls which are not completed on account of end user found busy"
::= { statCallProcessingEntry 176 }
statCallProcSIPTermCallAbandoned OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing calls which got abandoned "
::= { statCallProcessingEntry 177 }
statCallProcSIPTermCallNotAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing calls which are not answered by the called party"
::= { statCallProcessingEntry 178 }
statCallProcSIPTerTermEndUserBusy OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing calls which are not completed on account of end user found busy"
::= { statCallProcessingEntry 179 }
statCallProcSIPOrigSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming SIP calls get established. "
::= { statCallProcessingEntry 180 }
statCallProcSIPTermSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing SIP calls get established. "
::= { statCallProcessingEntry 181 }
statCallProcOVLTxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number sending overlapping calls "
::= { statCallProcessingEntry 182 }
statCallProcOVLRxCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number receiving overlapping calls "
::= { statCallProcessingEntry 183 }
statCallProcTermWBListAllow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is pegged when the call is allowed. "
::= { statCallProcessingEntry 184 }
statCallProcTermWBListBlock OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is pegged once the call is blocked. "
::= { statCallProcessingEntry 185 }
statAuditTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatAuditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Auditing related information."
::= { callAgentStatistics 4 }
statAuditEntry OBJECT-TYPE
SYNTAX StatAuditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for Auditing related information."
INDEX { statAuditComponentID }
::= { statAuditTable 1 }
StatAuditEntry ::= SEQUENCE {
statAuditComponentID DisplayString,
statAuditDOW DayOfWeek,
statAuditTOD TimeOfDay,
statAuditSS7TrunkStateSynced Counter32,
statAuditSS7LongDurExceeded Counter32,
statAuditFSTotalSipRespTMO Counter32,
statAuditFSTotalSipNoackTMO Counter32,
statAuditFSTotalCASwitchover Counter32,
statQosGateAuditFreed Counter32
}
statAuditComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Audit Component Identifier"
::= { statAuditEntry 1 }
statAuditDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statAuditEntry 2 }
statAuditTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statAuditEntry 3 }
statAuditSS7TrunkStateSynced OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SS7 trunks that had their local and remote states synchronized on the reporting trunk group."
::= { statAuditEntry 4 }
statAuditSS7LongDurExceeded OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SS7 calls that exceeded the long duration threshold on the reporting trunk group."
::= { statAuditEntry 5 }
statAuditFSTotalSipRespTMO OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CCB audits initiated due to a SIP Request that has timed out that is detected by the reporting feature server."
::= { statAuditEntry 6 }
statAuditFSTotalSipNoackTMO OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CCB audits initiated due to a SIP Invite that was not acknowledged that is detected by the reporting feature server."
::= { statAuditEntry 7 }
statAuditFSTotalCASwitchover OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of audits to check all active CCBs in response to a call agent platform switchover occurring. This is only applicable when the standby call agent becomes active."
::= { statAuditEntry 8 }
statQosGateAuditFreed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of dangling Gate IDX memory entries detected and freed by audit by the reporting BTS."
::= { statAuditEntry 9 }
statTrunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatTrunkEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Trunk Statistics."
::= { callAgentStatistics 5 }
statTrunkEntry OBJECT-TYPE
SYNTAX StatTrunkEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row description for trunk statistics."
INDEX { statTrunkComponentID, statTrunkTrkGrpType, statTrunkTrkGrpID, statTrunkTrkID }
::= { statTrunkTable 1 }
StatTrunkEntry ::= SEQUENCE {
statTrunkComponentID DisplayString,
statTrunkDOW DayOfWeek,
statTrunkTOD TimeOfDay,
statTrunkTrkGrpType DisplayString,
statTrunkTrkGrpID INTEGER,
statTrunkTrkID INTEGER,
statTrunkCallAttemptIncoming Counter32,
statTrunkCallAttemptOutgoing Counter32,
statTrunkCallAttemptTot Counter32,
statTrunkUsageIncoming Counter32,
statTrunkUsageOutgoing Counter32,
statTrunkUsageTot Counter32,
statTrunkOOS Counter32,
statTrunkOOSTime Counter32
}
statTrunkComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Component Identifier"
::= { statTrunkEntry 1 }
statTrunkDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Day of week statistics was collected."
::= { statTrunkEntry 2 }
statTrunkTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statTrunkEntry 3 }
statTrunkTrkGrpType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The signaling type of the reporting trunk group"
::= { statTrunkEntry 4 }
statTrunkTrkGrpID OBJECT-TYPE
SYNTAX INTEGER ( 0..2147483647 )
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The identification number of the reporting trunk group"
::= { statTrunkEntry 5 }
statTrunkTrkID OBJECT-TYPE
SYNTAX INTEGER ( 0..2147483647 )
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trunk ID (CIC)"
::= { statTrunkEntry 6 }
statTrunkCallAttemptIncoming OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of times the system recognizes an incoming seizure
for any trunk within the reporting trunk group"
::= { statTrunkEntry 7 }
statTrunkCallAttemptOutgoing OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of times the system tries to access any trunk for
an outbound call within the reporting trunk group"
::= { statTrunkEntry 8 }
statTrunkCallAttemptTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"TBD"
::= { statTrunkEntry 9 }
statTrunkUsageIncoming OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Summation of the number of trunk circuits within the
reporting trunk group marked as busy with originating calls
taken every 100 seconds during the interval"
::= { statTrunkEntry 10 }
statTrunkUsageOutgoing OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Summation of the number of trunk circuits within the
reporting trunk group marked as busy with terminating calls
taken every 100 seconds during the interval"
::= { statTrunkEntry 11 }
statTrunkUsageTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Summation of the incoming busy trunk and the outgoing busy
trunk counters for the reporting trunk group"
::= { statTrunkEntry 12 }
statTrunkOOS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The number of transitions to the locally blocked state for
all trunks within the reporting trunk group"
::= { statTrunkEntry 13 }
statTrunkOOSTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"TBD"
::= { statTrunkEntry 14 }
statSIATable OBJECT-TYPE
SYNTAX SEQUENCE OF StatSIAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SIA Statistics."
::= { callAgentStatistics 6 }
statSIAEntry OBJECT-TYPE
SYNTAX StatSIAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for SIA Statistics Table."
INDEX { statSIAComponentID }
::= { statSIATable 1 }
StatSIAEntry ::= SEQUENCE {
statSIAComponentID DisplayString,
statSIADOW DayOfWeek,
statSIATOD TimeOfDay,
statSIASISInMsg Counter32,
statSIASISInMsgSucc Counter32,
statSIASISOutMsg Counter32,
statSIASISOutMsgSucc Counter32,
statSIASISMsgREQRETRANRcv Counter32,
statSIASISMsgREQRETRANXmit Counter32,
statSIASISMsgRSPRETRANRcv Counter32,
statSIASISMsgRSPRETRANXmit Counter32,
statSIASIST1TimerExpired Counter32,
statSIASIST2TimerReached Counter32,
statSIASISMsgINVITERcv Counter32,
statSIASISMsgINVITEXmit Counter32,
statSIASISMsgCANCELRcv Counter32,
statSIASISMsgCANCELXmit Counter32,
statSIASISMsgBYERcv Counter32,
statSIASISMsgBYEXmit Counter32,
statSIASISMsgACKRcv Counter32,
statSIASISMsgACKXmit Counter32,
statSIASISMsgOPTIONRcv Counter32,
statSIASISMsgOPTIONXmit Counter32,
statSIASISMsgREGISTERRcv Counter32,
statSIASISMsgREGISTERXmit Counter32,
statSIASISMsgINFORcv Counter32,
statSIASISMsgINFOXmit Counter32,
statSIASISMsgNotifyRcv Counter32,
statSIASISMsgNotifyXmit Counter32,
statSIASIS100Rcv Counter32,
statSIASIS100Xmit Counter32,
statSIASIS18xRcv Counter32,
statSIASIS18xXmit Counter32,
statSIASIS200Rcv Counter32,
statSIASIS200Xmit Counter32,
statSIASIS3xxRcv Counter32,
statSIASIS3xxXmit Counter32,
statSIASIS4xxRcv Counter32,
statSIASIS4xxXmit Counter32,
statSIASIS5xxRcv Counter32,
statSIASIS5xxXmit Counter32,
statSIASIS6xxRcv Counter32,
statSIASIS6xxXmit Counter32,
statSIASIS7xxRcv Counter32,
statSIASIS7xxXmit Counter32,
statSIASISOutCallsInit Counter32,
statSIASISOutCallsSucc Counter32,
statSIASISOutCallsFail Counter32,
statSIASISInCallsInit Counter32,
statSIASISInCallsSucc Counter32,
statSIASISinCallsFail Counter32,
statSIASISMsgProvRSPRETRANRcv Counter32,
statSIASISMsgProvRSPRETRANXmit Counter32,
statSIASISMsgPRACKRcv Counter32,
statSIASISMsgPRACKXmit Counter32,
statSIASISMsgSUBSCRIBERcv Counter32,
statSIASISMsgSUBSCRIBEXmit Counter32,
statSIASISMsgREFERRcv Counter32,
statSIASISMsgREFERXmit Counter32,
statSIASISMsgREFERWREPLACESRcv Counter32,
statSIASISMsgINVITEREPLACESXmit Counter32,
statSIASISMsgINVITEREPLACESRcv Counter32,
statSIASISMsgREL100Rcv Counter32,
statSIASISMsgREL100Xmit Counter32,
statSIASISMsgUNSUPPORTEDRcv Counter32,
statSIASISMsgUPDATERcv Counter32,
statSIASISMsgUPDATEXmit Counter32,
statSIARefreshesXmit Counter32,
statSIATotSessTimerFail Counter32,
statSIACallFailByExpiredReg Counter32,
statSIASISMsgMWINotifyXmit Counter32,
statSIASISMsgMWINotifyXmitFail Counter32,
statSIASISMsgMWINotifyRcv Counter32,
statSIAAuditCCBFreed Counter32,
statSIAAuditBCMCallReleased Counter32,
statSIAAuditRegcontactFreed Counter32,
statSIASecureFQDNViolateReq Counter32,
statSIASecureFQDNViolateResp Counter32,
statSIAOCRXInviteReject Counter32,
statSIAOCRXRegisterReject Counter32,
statSIAOCRXReferReject Counter32,
statSIAOCRXSubscribeReject Counter32,
statSIAOCTXUnsolNotifySupp Counter32,
statSIAOCRXOptionsReject Counter32,
statSIAReferToTrunkRX Counter32,
statSIAReferToTrunkAttendedRX Counter32,
statSIAReferToUnknownDomainRX Counter32,
statSIAInviteNoCallToReplace Counter32,
statSIASISCCBReallocAttmp Counter32
}
statSIAComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SIA Component Identifier"
::= { statSIAEntry 1 }
statSIADOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statSIAEntry 2 }
statSIATOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statSIAEntry 3 }
statSIASISInMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server attempted to receive"
::= { statSIAEntry 4 }
statSIASISInMsgSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server successfully received"
::= { statSIAEntry 5 }
statSIASISOutMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server attempted to send"
::= { statSIAEntry 6 }
statSIASISOutMsgSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP messages the reporting call agent or
feature server successfully sent"
::= { statSIAEntry 7 }
statSIASISMsgREQRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP request retransmission messages the
reporting call agent or feature server received"
::= { statSIAEntry 8 }
statSIASISMsgREQRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP request retransmission messages the
reporting call agent or feature server sent"
::= { statSIAEntry 9 }
statSIASISMsgRSPRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP response retransmission messages the
reporting call agent or feature server received"
::= { statSIAEntry 10 }
statSIASISMsgRSPRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP response retransmission messages the
reporting call agent or feature server sent"
::= { statSIAEntry 11 }
statSIASIST1TimerExpired OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP T1 Timer expirations that occurred on the
reporting call agent or feature server received over the
collection interval"
::= { statSIAEntry 12 }
statSIASIST2TimerReached OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP T2 Timer expirations that occurred on the
reporting call agent or feature server received over the
collection interval"
::= { statSIAEntry 13 }
statSIASISMsgINVITERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent
or feature server received"
::= { statSIAEntry 14 }
statSIASISMsgINVITEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE messages the reporting call agent
or feature server sent"
::= { statSIAEntry 15 }
statSIASISMsgCANCELRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent
or feature server received"
::= { statSIAEntry 18 }
statSIASISMsgCANCELXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP CANCEL messages the reporting call agent
or feature server sent"
::= { statSIAEntry 19 }
statSIASISMsgBYERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP BYE messages the reporting call agent
or feature server received"
::= { statSIAEntry 20 }
statSIASISMsgBYEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP BYE messages the reporting call agent
or feature server sent"
::= { statSIAEntry 21 }
statSIASISMsgACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP ACK messages the reporting call agent
or feature server received"
::= { statSIAEntry 22 }
statSIASISMsgACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP ACK messages the reporting call agent
or feature server sent"
::= { statSIAEntry 23 }
statSIASISMsgOPTIONRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent
or feature server received"
::= { statSIAEntry 24 }
statSIASISMsgOPTIONXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP OPTIONS messages the reporting call agent
or feature server sent"
::= { statSIAEntry 25 }
statSIASISMsgREGISTERRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent
or feature server received"
::= { statSIAEntry 26 }
statSIASISMsgREGISTERXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REGISTER messages the reporting call agent
or feature server sent"
::= { statSIAEntry 27 }
statSIASISMsgINFORcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INFO messages the reporting call agent
or feature server received"
::= { statSIAEntry 28 }
statSIASISMsgINFOXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INFO messages the reporting call agent
or feature server sent"
::= { statSIAEntry 29 }
statSIASISMsgNotifyRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent
or feature server received"
::= { statSIAEntry 30 }
statSIASISMsgNotifyXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP NOTIFY messages the reporting call agent
or feature server sent"
::= { statSIAEntry 31 }
statSIASIS100Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting
call agent or feature server received"
::= { statSIAEntry 32 }
statSIASIS100Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 100 class (TRYING) messages the reporting
call agent or feature server sent"
::= { statSIAEntry 33 }
statSIASIS18xRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the
reporting call agent or feature server received"
::= { statSIAEntry 34 }
statSIASIS18xXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 18x class (INFORMATIONAL) messages the
reporting call agent or feature server sent"
::= { statSIAEntry 35 }
statSIASIS200Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting
call agent or feature server received"
::= { statSIAEntry 36 }
statSIASIS200Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 200 class (SUCCESS) messages the reporting
call agent or feature server sent"
::= { statSIAEntry 37 }
statSIASIS3xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the
reporting call agent or feature server received"
::= { statSIAEntry 38 }
statSIASIS3xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the
reporting call agent or feature server sent"
::= { statSIAEntry 39 }
statSIASIS4xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the
reporting call agent or feature server received"
::= { statSIAEntry 40 }
statSIASIS4xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the
reporting call agent or feature server sent"
::= { statSIAEntry 41 }
statSIASIS5xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the
reporting call agent or feature server received"
::= { statSIAEntry 42 }
statSIASIS5xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the
reporting call agent or feature server sent"
::= { statSIAEntry 43 }
statSIASIS6xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the
reporting call agent or feature server received"
::= { statSIAEntry 44 }
statSIASIS6xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the
reporting call agent or feature server sent"
::= { statSIAEntry 45 }
statSIASIS7xxRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting
call agent or feature server received"
::= { statSIAEntry 46 }
statSIASIS7xxXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 7xx class (RESERVED) messages the reporting
call agent or feature server sent"
::= { statSIAEntry 47 }
statSIASISOutCallsInit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing SIP call initializations on the
reporting call agent"
::= { statSIAEntry 48 }
statSIASISOutCallsSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful outgoing SIP calls on the
reporting call agent"
::= { statSIAEntry 49 }
statSIASISOutCallsFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed outgoing SIP calls on the
reporting call agent"
::= { statSIAEntry 50 }
statSIASISInCallsInit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming SIP call initializations on the
reporting call agent"
::= { statSIAEntry 51 }
statSIASISInCallsSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful incoming SIP calls on the
reporting call agent"
::= { statSIAEntry 52 }
statSIASISinCallsFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of failed incoming SIP calls on the
reporting call agent"
::= { statSIAEntry 53 }
statSIASISMsgProvRSPRETRANRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP provisioning response retransmission
messages the reporting call agent or feature server received"
::= { statSIAEntry 58 }
statSIASISMsgProvRSPRETRANXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP provisioning response retransmission
messages the reporting call agent or feature server sent"
::= { statSIAEntry 59 }
statSIASISMsgPRACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent
or feature server received"
::= { statSIAEntry 60 }
statSIASISMsgPRACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP PRACK messages the reporting call agent
or feature server sent"
::= { statSIAEntry 61 }
statSIASISMsgSUBSCRIBERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call agent
or feature server received"
::= { statSIAEntry 62 }
statSIASISMsgSUBSCRIBEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP SUBSCRIBE messages the reporting call agent
or feature server sent"
::= { statSIAEntry 63 }
statSIASISMsgREFERRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER messages the reporting call agent
or feature server received"
::= { statSIAEntry 64 }
statSIASISMsgREFERXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER messages the reporting call agent
or feature server sent"
::= { statSIAEntry 65 }
statSIASISMsgREFERWREPLACESRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP REFER REPLACES messages the reporting
call agent or feature server received"
::= { statSIAEntry 66 }
statSIASISMsgINVITEREPLACESXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting
call agent or feature server sent"
::= { statSIAEntry 67 }
statSIASISMsgINVITEREPLACESRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP INVITE REPLACES messages the reporting
call agent or feature server received"
::= { statSIAEntry 68 }
statSIASISMsgREL100Rcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting
call agent or feature server received"
::= { statSIAEntry 69 }
statSIASISMsgREL100Xmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of REL100 class (TRYING) messages the reporting
call agent or feature server sent"
::= { statSIAEntry 70 }
statSIASISMsgUNSUPPORTEDRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unsupported SIP messages the reporting
call agent or feature server received"
::= { statSIAEntry 71 }
statSIASISMsgUPDATERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP UPDATE messages the reporting call agent
or feature server received"
::= { statSIAEntry 72 }
statSIASISMsgUPDATEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP UPDATE messages the reporting call agent
or feature server sent"
::= { statSIAEntry 73 }
statSIARefreshesXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP message refreshes that occurred on the
reporting call agent"
::= { statSIAEntry 74 }
statSIATotSessTimerFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of call failures due to session timer expiry
that occurred on the reporting call agent"
::= { statSIAEntry 75 }
statSIACallFailByExpiredReg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP Notify MWIs sent to SIP phones by the reporting call agent"
::= { statSIAEntry 76 }
statSIASISMsgMWINotifyXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP Notify MWIs sent to SIP phones by the reporting call agent"
::= { statSIAEntry 77 }
statSIASISMsgMWINotifyXmitFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP Notify MWIs failed to be sent to SIP phones by the reporting call agent"
::= { statSIAEntry 78 }
statSIASISMsgMWINotifyRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SIP Notify MWIs received from SIP subscribers by the reporting call agent"
::= { statSIAEntry 79 }
statSIAAuditCCBFreed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Call Control Blocks freed due to the SIA audit on the reporting call agent"
::= { statSIAEntry 80 }
statSIAAuditBCMCallReleased OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of calls released when the SIP side is inactive on the reporting call agent."
::= { statSIAEntry 82 }
statSIAAuditRegcontactFreed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SIP Registration Contacts freed as a result of the SIA Memory Audit on the reporting call agent"
::= { statSIAEntry 83 }
statSIASecureFQDNViolateReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times that a SIP request fails the validation for a secure SIP endpoint on the reporting call agent."
::= { statSIAEntry 84 }
statSIASecureFQDNViolateResp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times that a SIP response fails the validation for a secure SIP endpoint on the reporting call agent."
::= { statSIAEntry 85 }
statSIAOCRXInviteReject OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incoming INVITE messages rejected due to an overload on the reporting call agent."
::= { statSIAEntry 86 }
statSIAOCRXRegisterReject OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incoming REGISTER messages rejected due to an overload on the reporting call agent."
::= { statSIAEntry 87 }
statSIAOCRXReferReject OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incoming REFER messages rejected due to an overload on the reporting call agent."
::= { statSIAEntry 88 }
statSIAOCRXSubscribeReject OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incoming SUBSCRIBE messages rejected due to an overload on the reporting call agent."
::= { statSIAEntry 89 }
statSIAOCTXUnsolNotifySupp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incoming unsolicited notification requests suppressed without sending to the endpoints due to an overload on the reporting call agent."
::= { statSIAEntry 90 }
statSIAOCRXOptionsReject OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incoming OPTIONS requests that were rejected due to an overload on the reporting call agent."
::= { statSIAEntry 91 }
statSIAReferToTrunkRX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter used for tracking Refer with Refer-to via domains that are defined as BTS trunks"
::= { statSIAEntry 92 }
statSIAReferToTrunkAttendedRX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of calls that receive Refer which replaces the call ID (attended transfer) with Refer-to to domains that are BTS trunks. The SIA_REFER_TO_TRUNK_RX counter is incremented as well as this counter."
::= { statSIAEntry 93 }
statSIAReferToUnknownDomainRX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter used for tracking Refer with Refer-to via a domain that is neither a BTS service domain nor a trunk."
::= { statSIAEntry 94 }
statSIAInviteNoCallToReplace OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INVITE SIP messages with Replaces header. Calls are rejected because the replaces call ID is not found."
::= { statSIAEntry 95 }
statSIASISCCBReallocAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter used for tracking the total number of SIA CCB Reallocations to higher sizes."
::= { statSIAEntry 96 }
statISDNTranslationTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatISDNTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ISDN Translation Statistics ."
::= { callAgentStatistics 7 }
statISDNTranslationEntry OBJECT-TYPE
SYNTAX StatISDNTranslationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for ISDN Translation Table."
INDEX { statISDNTransComponentID }
::= { statISDNTranslationTable 1 }
StatISDNTranslationEntry ::= SEQUENCE {
statISDNTransComponentID DisplayString,
statISDNTransDOW DayOfWeek,
statISDNTransTOD TimeOfDay,
statISDNTransMsgSETUPXmit Counter32,
statISDNTransMsgSETUPRcv Counter32,
statISDNTransMsgSETUPACKXmit Counter32,
statISDNTransMsgSETUPACKRcv Counter32,
statISDNTransMsgCALLPROCEEDXmit Counter32,
statISDNTransMsgCALLPROCEEDRcv Counter32,
statISDNTransMsgALERTINGXmit Counter32,
statISDNTransMsgALERTINGRcv Counter32,
statISDNTransMsgPROGRESSXmit Counter32,
statISDNTransMsgPROGRESSRcv Counter32,
statISDNTransMsgCONNECTXmit Counter32,
statISDNTransMsgCONNECTRcv Counter32,
statISDNTransMsgCONNECTACKXmit Counter32,
statISDNTransMsgCONNECTACKRcv Counter32,
statISDNTransMsgDISCONNECTXmit Counter32,
statISDNTransMsgDISCONNECTRcv Counter32,
statISDNTransMsgRELEASEXmit Counter32,
statISDNTransMsgRELEASERcv Counter32,
statISDNTransMsgRELEASECOMPLETEXmit Counter32,
statISDNTransMsgRELEASECOMPLETERcv Counter32,
statISDNTransMsgRESTARTXmit Counter32,
statISDNTransMsgRESTARTRcv Counter32,
statISDNTransMsgRESTARTACKXmit Counter32,
statISDNTransMsgRESTARTACKRcv Counter32,
statISDNTransMsgINFORMATIONXmit Counter32,
statISDNTransMsgINFORMATIONRcv Counter32,
statISDNTransMsgNOTIFYXmit Counter32,
statISDNTransMsgNOTIFYRcv Counter32,
statISDNTransMsgSTATUSXmit Counter32,
statISDNTransMsgSTATUSRcv Counter32,
statISDNTransMsgSTATUSENQUIRYXmit Counter32,
statISDNTransMsgSTATUSENQUIRYRcv Counter32,
statISDNTransMsgSERVICEXmit Counter32,
statISDNTransMsgSERVICERcv Counter32,
statISDNTransMsgSERVICEACKXmit Counter32,
statISDNTransMsgSERVICEACKRcv Counter32,
statISDNTransMsgFACILITYXmit Counter32,
statISDNTransMsgFACILITYRcv Counter32,
statISDNTransMsgSUSPENDXmit Counter32,
statISDNTransMsgSUSPENDRcv Counter32,
statISDNTransMsgSUSPENDACKXmit Counter32,
statISDNTransMsgSUSPENDACKRcv Counter32,
statISDNTransMsgSUSPENDREJXmit Counter32,
statISDNTransMsgSUSPENDREJRcv Counter32,
statISDNTransMsgRESUMEXmit Counter32,
statISDNTransMsgRESUMERcv Counter32,
statISDNTransMsgRESUMEACKXmit Counter32,
statISDNTransMsgRESUMEACKRcv Counter32,
statISDNTransMsgRESUMEREJXmit Counter32,
statISDNTransMsgRESUMEREJRcv Counter32,
statISDNTransMsgUSERINFOXmit Counter32,
statISDNTransMsgUSERINFORcv Counter32,
statISDNTransMsgCONGCNTLXmit Counter32,
statISDNTransMsgCONGCTRLRcv Counter32,
statISDNTransMsgSEGMENTXmit Counter32,
statISDNTransMsgSEGMENTRcv Counter32,
statISDNTransMsgOCSETUPRejected Counter32
}
statISDNTransComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ISDN Component Identifier"
::= { statISDNTranslationEntry 1 }
statISDNTransDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statISDNTranslationEntry 3 }
statISDNTransTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statISDNTranslationEntry 4 }
statISDNTransMsgSETUPXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN SETUP messages sent from the reporting
call agent"
::= { statISDNTranslationEntry 5 }
statISDNTransMsgSETUPRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN SETUP messages received by the reporting
call agent"
::= { statISDNTranslationEntry 6 }
statISDNTransMsgSETUPACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN SETUP ACK messages sent from the reporting
call agent"
::= { statISDNTranslationEntry 7 }
statISDNTransMsgSETUPACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN SETUP ACK messages received by the
reporting call agent"
::= { statISDNTranslationEntry 8 }
statISDNTransMsgCALLPROCEEDXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN CALL PROCEED messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 9 }
statISDNTransMsgCALLPROCEEDRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN CALL PROCEED messages received by the
reporting call agent"
::= { statISDNTranslationEntry 10 }
statISDNTransMsgALERTINGXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN ALERTING messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 11 }
statISDNTransMsgALERTINGRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN ALERTING messages received by the
reporting call agent"
::= { statISDNTranslationEntry 12 }
statISDNTransMsgPROGRESSXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN PROGRESS messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 13 }
statISDNTransMsgPROGRESSRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN PROGRESS messages received by the
reporting call agent"
::= { statISDNTranslationEntry 14 }
statISDNTransMsgCONNECTXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN CONNECT messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 15 }
statISDNTransMsgCONNECTRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN CONNECT messages received by the
reporting call agent"
::= { statISDNTranslationEntry 16 }
statISDNTransMsgCONNECTACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN CONNECT ACK messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 17 }
statISDNTransMsgCONNECTACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN CONNECT ACK messages received by the
reporting call agent"
::= { statISDNTranslationEntry 18 }
statISDNTransMsgDISCONNECTXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN DISCONNECT messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 19 }
statISDNTransMsgDISCONNECTRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN DISCONNECT messages received by the
reporting call agent"
::= { statISDNTranslationEntry 20 }
statISDNTransMsgRELEASEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN RELEASE messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 21 }
statISDNTransMsgRELEASERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN RELEASE messages received by the
reporting call agent"
::= { statISDNTranslationEntry 22 }
statISDNTransMsgRELEASECOMPLETEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN RELEASE COMPLETE messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 23 }
statISDNTransMsgRELEASECOMPLETERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN RELEASE COMPLETE messages received by the
reporting call agent"
::= { statISDNTranslationEntry 24 }
statISDNTransMsgRESTARTXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN RESTART messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 25 }
statISDNTransMsgRESTARTRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN RESTART messages received by the
reporting call agent"
::= { statISDNTranslationEntry 26 }
statISDNTransMsgRESTARTACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN RESTART ACK messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 27 }
statISDNTransMsgRESTARTACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN RESTART ACK messages received by the
reporting call agent"
::= { statISDNTranslationEntry 28 }
statISDNTransMsgINFORMATIONXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN INFORMATION messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 29 }
statISDNTransMsgINFORMATIONRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN INFORMATION messages received by the
reporting call agent"
::= { statISDNTranslationEntry 30 }
statISDNTransMsgNOTIFYXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN NOTIFY messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 31 }
statISDNTransMsgNOTIFYRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN NOTIFY messages received by the
reporting call agent"
::= { statISDNTranslationEntry 32 }
statISDNTransMsgSTATUSXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN STATUS messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 33 }
statISDNTransMsgSTATUSRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN STATUS messages received by the
reporting call agent"
::= { statISDNTranslationEntry 34 }
statISDNTransMsgSTATUSENQUIRYXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN STATUS ENQUIRY messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 35 }
statISDNTransMsgSTATUSENQUIRYRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN STATUS ENQUIRY messages received by the
reporting call agent"
::= { statISDNTranslationEntry 36 }
statISDNTransMsgSERVICEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN SERVICE messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 37 }
statISDNTransMsgSERVICERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN SERVICE messages received by the
reporting call agent"
::= { statISDNTranslationEntry 38 }
statISDNTransMsgSERVICEACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN SERVICE ACK messages sent from the
reporting call agent"
::= { statISDNTranslationEntry 39 }
statISDNTransMsgSERVICEACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN SERVICE ACK messages received by the
reporting call agent"
::= { statISDNTranslationEntry 40 }
statISDNTransMsgFACILITYXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN FACILITY messages sent from the reporting
call agent"
::= { statISDNTranslationEntry 41 }
statISDNTransMsgFACILITYRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN FACILITY messages received by the
reporting call agent"
::= { statISDNTranslationEntry 42 }
statISDNTransMsgSUSPENDXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Suspend messages sent from the reporting
call agent. This counter is only applicable to ETSI PRI."
::= { statISDNTranslationEntry 43 }
statISDNTransMsgSUSPENDRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Suspend messages received by the reporting
call agent. This counter is only applicable to ETSI PRI."
::= { statISDNTranslationEntry 44 }
statISDNTransMsgSUSPENDACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Suspend Acknowledge messages sent from the
reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 45 }
statISDNTransMsgSUSPENDACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Suspend Acknowledge messages received by
the reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 46 }
statISDNTransMsgSUSPENDREJXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Suspend Reject messages sent from the
reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 47 }
statISDNTransMsgSUSPENDREJRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Suspend Reject messages received by the
reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 48 }
statISDNTransMsgRESUMEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Resume messages sent from the reporting
call agent. This counter is only applicable to ETSI PRI."
::= { statISDNTranslationEntry 49 }
statISDNTransMsgRESUMERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Resume messages received by the reporting
call agent. This counter is only applicable to ETSI PRI."
::= { statISDNTranslationEntry 50 }
statISDNTransMsgRESUMEACKXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Resume Acknowledge messages sent from the
reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 51 }
statISDNTransMsgRESUMEACKRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Resume Acknowledge messages received by
the reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 52 }
statISDNTransMsgRESUMEREJXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Resume Reject messages sent from the
reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 53 }
statISDNTransMsgRESUMEREJRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Resume Reject messages received by the
reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 54 }
statISDNTransMsgUSERINFOXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN User Information messages sent from the
reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 55 }
statISDNTransMsgUSERINFORcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN User Information messages received by the
reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 56 }
statISDNTransMsgCONGCNTLXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Congestion Control messages sent from the
reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 57 }
statISDNTransMsgCONGCTRLRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Congestion Control messages received by
the reporting call agent. This counter is only applicable to
ETSI PRI."
::= { statISDNTranslationEntry 58 }
statISDNTransMsgSEGMENTXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Segment messages sent from the reporting
call agent. This counter is only applicable to ETSI PRI."
::= { statISDNTranslationEntry 59 }
statISDNTransMsgSEGMENTRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ISDN Segment messages received by the reporting
call agent. This counter is only applicable to ETSI PRI."
::= { statISDNTranslationEntry 60 }
statISDNTransMsgOCSETUPRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ISDN calls rejected due to system overload"
::= { statISDNTranslationEntry 61 }
statTGUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatTGUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TG Usage Statistics ."
::= { callAgentStatistics 10 }
statTGUsageEntry OBJECT-TYPE
SYNTAX StatTGUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for TG Usage Table."
INDEX { statTGUsageComponentID, statTGUsageTrkGrpType, statTGUsageTrkGrpID }
::= { statTGUsageTable 1 }
StatTGUsageEntry ::= SEQUENCE {
statTGUsageComponentID DisplayString,
statTGUsageDOW DayOfWeek,
statTGUsageTOD TimeOfDay,
statTGUsageTrkGrpType DisplayString,
statTGUsageTrkGrpID DisplayString,
statTGUsageExchange DisplayString,
statTGUsageName DisplayString,
statTGUsageIncomingCallAttempt Counter32,
statTGUsageOutgoingCallAttempt Counter32,
statTGUsageOutboundCallFail Counter32,
statTGUsageOverflowTot Counter32,
statTGUsageTrunkTot Counter32,
statTGusageIncomingBusyTrunk Counter32,
statTGUsageOutgoingBusyTrunk Counter32,
statTGUsageOOSTrunkTot Counter32,
statTGUsageIncomingUsageTot Counter32,
statTGUsageOutgoingUsageTot Counter32,
statTGUsageTotalUsage Counter32,
statTGUsageAverageUsage Counter32,
statTGUsageTotalINSTrk Counter32,
statTGUsageMaintTrkUsage Counter32,
statTGUsageOOSTrkUsage Counter32,
statTGUsageUEQPTrkUsage Counter32,
statTGUsageLBLKTrkUsage Counter32,
statTGUsageRBLKTrkUsage Counter32,
statTGUsageGlareCount Counter32,
statTGUsageRegistersRecvd Counter32,
statTGUsage401sSent Counter32,
statTGUsageIncomingCallAbandoned Counter32,
statTGUsageIncomingCallNotAnswered Counter32,
statTGUsageIncomingCallEndUsrBusy Counter32,
statTGUsageOutgoingCallAbandoned Counter32,
statTGUsageOutgoingCallNotAnswered Counter32,
statTGUsageOutgoingCallEndUsrBusy Counter32,
statTGUsageInboundFail Counter32,
statTGUsageInboundSuccess Counter32,
statTGUsageOutboundSuccess Counter32,
statTGUsage3xxRX Counter32,
statTGUsage3xxTX Counter32,
statTGUsage4xxRX Counter32,
statTGUsage4xxTX Counter32,
statTGUsage5xxRX Counter32,
statTGUsage5xxTX Counter32,
statTGUsage6xxRX Counter32,
statTGUsage6xxTX Counter32
}
statTGUsageComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TG Usage Component Identifier"
::= { statTGUsageEntry 1 }
statTGUsageDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statTGUsageEntry 2 }
statTGUsageTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statTGUsageEntry 3 }
statTGUsageTrkGrpType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The signaling type of the reporting trunk group"
::= { statTGUsageEntry 4 }
statTGUsageTrkGrpID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identification number of the reporting trunk group"
::= { statTGUsageEntry 5 }
statTGUsageIncomingCallAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the system recognizes an incoming seizure
for any trunk within the reporting trunk group"
::= { statTGUsageEntry 7 }
statTGUsageOutgoingCallAttempt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the system tries to access any trunk for
an outbound call within the reporting trunk group"
::= { statTGUsageEntry 8 }
statTGUsageOutboundCallFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the system tries to access any trunk for
an outbound call unsuccessfully within the reporting trunk
group"
::= { statTGUsageEntry 9 }
statTGUsageOverflowTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outbound trunk call attempt failures due to
all trunks within the reporting trunk group being unavailable"
::= { statTGUsageEntry 10 }
statTGUsageTrunkTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of trunks within the reporting trunk group"
::= { statTGUsageEntry 11 }
statTGusageIncomingBusyTrunk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Summation of the number of trunk circuits within the
reporting trunk group marked as busy with originating calls
taken every 100 seconds during the interval"
::= { statTGUsageEntry 12 }
statTGUsageOutgoingBusyTrunk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Summation of the number of trunk circuits within the
reporting trunk group marked as busy with terminating calls
taken every 100 seconds during the interval"
::= { statTGUsageEntry 13 }
statTGUsageOOSTrunkTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transitions to the locally blocked state for
all trunks within the reporting trunk group"
::= { statTGUsageEntry 14 }
statTGUsageIncomingUsageTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Summation of the number of trunk circuits within the
reporting trunk group marked as busy with originating calls
taken every 100 seconds during the interval"
::= { statTGUsageEntry 15 }
statTGUsageOutgoingUsageTot OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Summation of the number of trunk circuits within the
reporting trunk group marked as busy with terminating calls
taken every 100 seconds during the interval"
::= { statTGUsageEntry 16 }
statTGUsageTotalUsage OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Summation of the incoming usage and the outgoing usage counters for the reporting trunk group. This counter is not incremented for SIP or H323 trunk groups."
::= { statTGUsageEntry 17 }
statTGUsageAverageUsage OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total usage counter divided by the number of trunks in
the reporting trunk group"
::= { statTGUsageEntry 18 }
statTGUsageTotalINSTrk OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CCS value for trunks with a status of INS in the reporting trunk group. This counter is not incremented for SIP or H323 trunk groups."
::= { statTGUsageEntry 19 }
statTGUsageMaintTrkUsage OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CCS value for trunks that are MAINT, OOS, UEQP, Local Blocked, or Remote Blocked in the reporting trunk group for this reporting period. This counter is not incremented for SIP or H323 trunk groups."
::= { statTGUsageEntry 20 }
statTGUsageOOSTrkUsage OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CCS value for trunks that are MAINT, OOS, UEQP, Local Blocked, or Remote Blocked in the reporting trunk group for this reporting period. This counter is not incremented for SIP or H323 trunk groups."
::= { statTGUsageEntry 21 }
statTGUsageUEQPTrkUsage OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CCS value for trunks that are MAINT, OOS, UEQP, Local Blocked, or Remote Blocked in the reporting trunk group for this reporting period. This counter is not incremented for SIP or H323 trunk groups."
::= { statTGUsageEntry 22 }
statTGUsageLBLKTrkUsage OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CCS value for trunks that are MAINT, OOS, UEQP, Local Blocked, or Remote Blocked in the reporting trunk group for this reporting period. This counter is not incremented for SIP or H323 trunk groups."
::= { statTGUsageEntry 23 }
statTGUsageRBLKTrkUsage OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CCS value for trunks that are MAINT, OOS, UEQP, Local Blocked, or Remote Blocked in the reporting trunk group for this reporting period. This counter is not incremented for SIP or H323 trunk groups."
::= { statTGUsageEntry 24 }
statTGUsageGlareCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of attempts by the local and remote switch to use the same CIC on a 2-way trunk group. When glare is encountered and pegged here, the TRKGRP_OUTGOING_ATTMP counter is NOT pegged. This counter is not incremented for SIP or H323 trunk groups."
::= { statTGUsageEntry 25 }
statTGUsageIncomingCallAbandoned OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Incoming Call which got abandoned on Trunk at the reporting Call Agent."
::= { statTGUsageEntry 26 }
statTGUsageIncomingCallNotAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Incoming Calls which are not answered on a Trunk by Called party at reporting Call Agent."
::= { statTGUsageEntry 27 }
statTGUsageIncomingCallEndUsrBusy OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Incoming calls which are not completed when Called party is found busy at reporting Call Agent."
::= { statTGUsageEntry 28 }
statTGUsageOutgoingCallAbandoned OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Outgoing Calls which got abandoned on Trunk at the reporting Call Agent."
::= { statTGUsageEntry 29 }
statTGUsageOutgoingCallNotAnswered OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Outgoing Calls which are not answered on a Trunk by Called party at reporting Call Agent."
::= { statTGUsageEntry 30 }
statTGUsageOutgoingCallEndUsrBusy OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Outgoing calls which are not completed when Called party is found busy at reporting Call Agent."
::= { statTGUsageEntry 31 }
statTGUsageInboundFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming calls which failed on an incoming SIP trunk."
::= { statTGUsageEntry 32 }
statTGUsageInboundSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of incoming calls which were successful on an incoming SIP trunk."
::= { statTGUsageEntry 33 }
statTGUsageOutboundSuccess OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outgoing calls which were successful on an outgoing SIP trunk."
::= { statTGUsageEntry 34 }
statTGUsage3xxRX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting call agent received on SIP trunk group."
::= { statTGUsageEntry 35 }
statTGUsage3xxTX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 3xx class (REDIRECTION) messages the reporting call agent transmitted on SIP trunk group."
::= { statTGUsageEntry 36 }
statTGUsage4xxRX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the reporting call agent received on SIP trunk group."
::= { statTGUsageEntry 37 }
statTGUsage4xxTX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 4xx class (REQUEST FAILURES) messages the reporting call agent transmitted on SIP trunk group."
::= { statTGUsageEntry 38 }
statTGUsage5xxRX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the reporting call agent received on SIP trunk group."
::= { statTGUsageEntry 39 }
statTGUsage5xxTX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 5xx class (SERVER FAILURES) messages the reporting call agent transmitted on SIP trunk group."
::= { statTGUsageEntry 40 }
statTGUsage6xxRX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the reporting call agent received on SIP trunk group."
::= { statTGUsageEntry 41 }
statTGUsage6xxTX OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 6xx class (GLOBAL FAILURES) messages the reporting call agent transmitted on SIP trunk group."
::= { statTGUsageEntry 42 }
statTGUsageExchange OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CLLI code from the POP table of the reporting trunk group."
::= { statTGUsageEntry 100 }
statTGUsageName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote switch CLLI code and trunk group type of the reporting trunk group."
::= { statTGUsageEntry 101 }
statTGUsageRegistersRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SIP REGISTER methods received on a trunk group."
::= { statTGUsageEntry 125 }
statTGUsage401sSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SIP 401 responses sent."
::= { statTGUsageEntry 126 }
statAnnouncementTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatAnnouncementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Announcement Statistics ."
::= { callAgentStatistics 14 }
statAnnouncementEntry OBJECT-TYPE
SYNTAX StatAnnouncementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for 0 call trunk provTable."
INDEX { statAnnouncementComponentID }
::= { statAnnouncementTable 1 }
StatAnnouncementEntry ::= SEQUENCE {
statAnnouncementComponentID DisplayString,
statAnnouncementDOW DayOfWeek,
statAnnouncementTOD TimeOfDay,
statAnnouncementUnAvailable Counter32,
statAnnouncementCallRejected Counter32,
statAnnouncementAddrIncomplete Counter32,
statAnnouncementFacRejected Counter32,
statAnnouncementPre01Absent Counter32,
statAnnouncementPre01Present Counter32,
statAnnouncementHPNAAbsent Counter32,
statAnnouncementNoRouteDest Counter32,
statAnnouncementUnAllocatedNum Counter32,
statAnnouncementNumberChanged Counter32,
statAnnouncementDestOutOfOrder Counter32,
statAnnouncementTempDisconnect Counter32,
statAnnouncemenFeatureNotSubs Counter32,
statAnnouncementAuthcodeInvalid Counter32,
statAnnouncementNoRTETransit Counter32,
statAnnouncementCauseUnknown Counter32,
statAnnouncementEMGCktUnavail Counter32
}
statAnnouncementComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Component Identifier"
::= { statAnnouncementEntry 1 }
statAnnouncementDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statAnnouncementEntry 2 }
statAnnouncementTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statAnnouncementEntry 3 }
statAnnouncementUnAvailable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the circuit
unavailable announcement by the reporting call agent"
::= { statAnnouncementEntry 4 }
statAnnouncementCallRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the call
rejected announcement by the reporting call agent"
::= { statAnnouncementEntry 5 }
statAnnouncementAddrIncomplete OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the address
incomplete announcement by the reporting call agent"
::= { statAnnouncementEntry 6 }
statAnnouncementFacRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the facility
rejected announcement by the reporting call agent"
::= { statAnnouncementEntry 7 }
statAnnouncementPre01Absent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the prefix
of 0 or 1 absent announcement by the reporting call agent"
::= { statAnnouncementEntry 8 }
statAnnouncementPre01Present OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the
prefix 0 or 1 present announcement by the reporting call agent"
::= { statAnnouncementEntry 9 }
statAnnouncementHPNAAbsent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the HNPA
area code announcement by the reporting call agent"
::= { statAnnouncementEntry 10 }
statAnnouncementNoRouteDest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the no
route to destination announcement by the reporting call agent"
::= { statAnnouncementEntry 11 }
statAnnouncementUnAllocatedNum OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the
unallocated directory number announcement by the reporting
call agent"
::= { statAnnouncementEntry 12 }
statAnnouncementNumberChanged OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the directory
number changed announcement by the reporting call agent"
::= { statAnnouncementEntry 13 }
statAnnouncementDestOutOfOrder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the
destination out of order announcement by the reporting
call agent"
::= { statAnnouncementEntry 14 }
statAnnouncementTempDisconnect OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the
temporarily disconnected announcement by the reporting
call agent"
::= { statAnnouncementEntry 15 }
statAnnouncemenFeatureNotSubs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the feature
not subscribed to announcement by the reporting call agent"
::= { statAnnouncementEntry 16 }
statAnnouncementAuthcodeInvalid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the
authorization code invalid announcement by the reporting
call agent"
::= { statAnnouncementEntry 17 }
statAnnouncementNoRTETransit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the no
route to specified network announcement by the reporting
call agent"
::= { statAnnouncementEntry 18 }
statAnnouncementCauseUnknown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the cause
unknown announcement by the reporting call agent"
::= { statAnnouncementEntry 19 }
statAnnouncementEMGCktUnavail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of calls resulting in the playing of the 'No
Emergency Circuit Available' announcement by the reporting
call agent"
::= { statAnnouncementEntry 20 }
statH323Table OBJECT-TYPE
SYNTAX SEQUENCE OF StatH323Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"H323 Statistics ."
::= { callAgentStatistics 15 }
statH323Entry OBJECT-TYPE
SYNTAX StatH323Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for 0 call trunk provTable."
INDEX { statH323ComponentID }
::= { statH323Table 1 }
StatH323Entry ::= SEQUENCE {
statH323ComponentID DisplayString,
statH323DOW DayOfWeek,
statH323TOD TimeOfDay,
statH323MsgGRQXmit Counter32,
statH323MsgGCFXmit Counter32,
statH323MsgGRJXmit Counter32,
statH323MsgRRQXmit Counter32,
statH323MsgRCFXmit Counter32,
statH323MsgRRJXmit Counter32,
statH323MsgARQXmit Counter32,
statH323MsgACFXmit Counter32,
statH323MsgARJXmit Counter32,
statH323MsgBRQXmit Counter32,
statH323MsgBCFXmit Counter32,
statH323MsgBRJXmit Counter32,
statH323MsgDRQXmit Counter32,
statH323MsgDCFXmit Counter32,
statH323MsgDRJXmit Counter32,
statH323MsgURQXmit Counter32,
statH323MsgUCFXmit Counter32,
statH323MsgURJXmit Counter32,
statH323MsgRIPXmit Counter32,
statH323MsgRAIXmit Counter32,
statH323MsgRACXmit Counter32,
statH323MsgGRQRcv Counter32,
statH323MsgGCFRcv Counter32,
statH323MsgGRJRcv Counter32,
statH323MsgRRQRcv Counter32,
statH323MsgRCFRcv Counter32,
statH323MsgRRJRcv Counter32,
statH323MsgARQRcv Counter32,
statH323MsgACFRcv Counter32,
statH323MsgARJRcv Counter32,
statH323MsgBRQRcv Counter32,
statH323MsgBCFRcv Counter32,
statH323MsgBRJRcv Counter32,
statH323MsgDRQRcv Counter32,
statH323MsgDCFRcv Counter32,
statH323MsgDRJRcv Counter32,
statH323MsgURQRcv Counter32,
statH323MsgUCFRcv Counter32,
statH323MsgURJRcv Counter32,
statH323MsgRIPRcv Counter32,
statH323MsgRAIRcv Counter32,
statH323MsgRACRcv Counter32,
statH323MsgSETUPXmit Counter32,
statH323MsgCONNECTXmit Counter32,
statH323MsgALERTXmit Counter32,
statH323MsgINPROGRESSXmit Counter32,
statH323MsgCALLPROCEEDINGXmit Counter32,
statH323MsgNOTIFYXmit Counter32,
statH323MsgINFOXmit Counter32,
statH323MsgUSERINFOXmit Counter32,
statH323MsgFACILITYXmit Counter32,
statH323MsgRELEASEXmit Counter32,
statH323MsgREJECTXmit Counter32,
statH323MsgPASSTHROUXmit Counter32,
statH323MsgSETUPRcv Counter32,
statH323MsgCONNECTRcv Counter32,
statH323MsgALERTRcv Counter32,
statH323MsgINPROGRESSRcv Counter32,
statH323MsgCALLPROCEEDINGRcv Counter32,
statH323MsgNOTIFYRcv Counter32,
statH323MsgINFORcv Counter32,
statH323MsgUSERINFORcv Counter32,
statH323MsgFACILITYRcv Counter32,
statH323MsgRELEASERcv Counter32,
statH323MsgREJECTRcv Counter32,
statH323MsgPASSTHROURcv Counter32,
statH323MsgSETUPFail Counter32,
statH323MsgCONNECTFail Counter32,
statH323MsgALERTFail Counter32,
statH323MsgINPROGRESSFail Counter32,
statH323MsgCALLPROCEEDINGFail Counter32,
statH323MsgNOTIFYFail Counter32,
statH323MsgINFOFail Counter32,
statH323MsgUSERINFOFail Counter32,
statH323MsgFACILITYFail Counter32,
statH323MsgRELEASEFail Counter32,
statH323MsgREJECTFail Counter32,
statH323MsgPASSTHROUFail Counter32,
statH323MsgOCSETUPRejected Counter32
}
statH323ComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Component Identifier"
::= { statH323Entry 1 }
statH323DOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statH323Entry 2 }
statH323TOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statH323Entry 3 }
statH323MsgGRQXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 GRQs transmitted by the reporting
call agent"
::= { statH323Entry 4 }
statH323MsgGCFXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 GCFs transmitted by the reporting
call agent"
::= { statH323Entry 5 }
statH323MsgGRJXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 GRJs received by the reporting
call agent"
::= { statH323Entry 6 }
statH323MsgRRQXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RRQs transmitted by the reporting
call agent"
::= { statH323Entry 7 }
statH323MsgRCFXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RCFs transmitted by the reporting
call agent"
::= { statH323Entry 8 }
statH323MsgRRJXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RRJs transmitted by the reporting
call agent"
::= { statH323Entry 9 }
statH323MsgARQXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 ARQs transmitted by the reporting
call agent"
::= { statH323Entry 10 }
statH323MsgACFXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 ACFs transmitted by the reporting
call agent"
::= { statH323Entry 11 }
statH323MsgARJXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 ARJs transmitted by the reporting
call agent"
::= { statH323Entry 12 }
statH323MsgBRQXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 BRQs transmitted by the reporting
call agent"
::= { statH323Entry 13 }
statH323MsgBCFXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 BCFs transmitted by the reporting
call agent"
::= { statH323Entry 14 }
statH323MsgBRJXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 BRJs transmitted by the reporting
call agent"
::= { statH323Entry 15 }
statH323MsgDRQXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 DRQs transmitted by the reporting
call agent"
::= { statH323Entry 16 }
statH323MsgDCFXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 DCFs transmitted by the reporting
call agent"
::= { statH323Entry 17 }
statH323MsgDRJXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 DRJs transmitted by the reporting
call agent"
::= { statH323Entry 18 }
statH323MsgURQXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 URQs transmitted by the reporting
call agent"
::= { statH323Entry 19 }
statH323MsgUCFXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 UCFs transmitted by the reporting
call agent"
::= { statH323Entry 20 }
statH323MsgURJXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 URJs transmitted by the reporting
call agent"
::= { statH323Entry 21 }
statH323MsgRIPXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RIPs transmitted by the reporting
call agent"
::= { statH323Entry 22 }
statH323MsgRAIXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RAIs transmitted by the reporting
call agent"
::= { statH323Entry 23 }
statH323MsgRACXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RACs transmitted by the reporting
call agent"
::= { statH323Entry 24 }
statH323MsgGRQRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 GRQs recieved by the reporting
call agent"
::= { statH323Entry 25 }
statH323MsgGCFRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 GCFs received by the reporting
call agent"
::= { statH323Entry 26 }
statH323MsgGRJRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 GRJs transmitted by the reporting
call agent"
::= { statH323Entry 27 }
statH323MsgRRQRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RRQs received by the reporting
call agent"
::= { statH323Entry 28 }
statH323MsgRCFRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RCFs received by the reporting
call agent"
::= { statH323Entry 29 }
statH323MsgRRJRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RRJs received by the reporting
call agent"
::= { statH323Entry 30 }
statH323MsgARQRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 ARQs received by the reporting
call agent"
::= { statH323Entry 31 }
statH323MsgACFRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 ACFs received by the reporting
call agent"
::= { statH323Entry 32 }
statH323MsgARJRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 ARJs received by the reporting
call agent"
::= { statH323Entry 33 }
statH323MsgBRQRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 BRQs received by the reporting
call agent"
::= { statH323Entry 34 }
statH323MsgBCFRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 BCFs received by the reporting
call agent"
::= { statH323Entry 35 }
statH323MsgBRJRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 BRJs received by the reporting
call agent"
::= { statH323Entry 36 }
statH323MsgDRQRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 DRQs received by the reporting
call agent"
::= { statH323Entry 37 }
statH323MsgDCFRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 DCFs received by the reporting
call agent"
::= { statH323Entry 38 }
statH323MsgDRJRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 DRJs received by the reporting
call agent"
::= { statH323Entry 39 }
statH323MsgURQRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 URQs received by the reporting
call agent"
::= { statH323Entry 40 }
statH323MsgUCFRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 UCFs received by the reporting
call agent"
::= { statH323Entry 41 }
statH323MsgURJRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 URJs received by the reporting
call agent"
::= { statH323Entry 42 }
statH323MsgRIPRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RIPs received by the reporting
call agent"
::= { statH323Entry 43 }
statH323MsgRAIRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RAIs received by the reporting
call agent"
::= { statH323Entry 44 }
statH323MsgRACRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RACs received by the reporting
call agent"
::= { statH323Entry 45 }
statH323MsgSETUPXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 SETUPs transmitted by the reporting
call agent"
::= { statH323Entry 46 }
statH323MsgCONNECTXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 CONNECTs transmitted by the reporting
call agent"
::= { statH323Entry 47 }
statH323MsgALERTXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 ALERTs transmitted by the reporting
call agent"
::= { statH323Entry 48 }
statH323MsgINPROGRESSXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 IN PROGRESSs transmitted by the
reporting call agent"
::= { statH323Entry 49 }
statH323MsgCALLPROCEEDINGXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 CALL PROCEEDINGs transmitted by the
reporting call agent"
::= { statH323Entry 50 }
statH323MsgNOTIFYXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 NOTIFYs transmitted by the reporting
call agent"
::= { statH323Entry 51 }
statH323MsgINFOXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 INFOs transmitted by the reporting
call agent"
::= { statH323Entry 52 }
statH323MsgUSERINFOXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 USER INFOs transmitted by the
reporting call agent"
::= { statH323Entry 53 }
statH323MsgFACILITYXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 FACILITYs transmitted by the
reporting call agent"
::= { statH323Entry 54 }
statH323MsgRELEASEXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RELEASEs transmitted by the
reporting call agent"
::= { statH323Entry 55 }
statH323MsgREJECTXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 REJECTs transmitted by the reporting
call agent"
::= { statH323Entry 56 }
statH323MsgPASSTHROUXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 PASS THROUGHs transmitted by the
reporting call agent"
::= { statH323Entry 57 }
statH323MsgSETUPRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 SETUPs received by the reporting
call agent"
::= { statH323Entry 58 }
statH323MsgCONNECTRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 CONNECTs received by the reporting
call agent"
::= { statH323Entry 59 }
statH323MsgALERTRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 ALERTs received by the reporting
call agent"
::= { statH323Entry 60 }
statH323MsgINPROGRESSRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 IN PROGRESSs received by the
reporting call agent"
::= { statH323Entry 61 }
statH323MsgCALLPROCEEDINGRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 CALL PROCEEDINGs received by the
reporting call agent"
::= { statH323Entry 62 }
statH323MsgNOTIFYRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 NOTIFYs received by the reporting
call agent"
::= { statH323Entry 63 }
statH323MsgINFORcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 INFOs received by the reporting
call agent"
::= { statH323Entry 64 }
statH323MsgUSERINFORcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 USER INFOs received by the reporting
call agent"
::= { statH323Entry 65 }
statH323MsgFACILITYRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 FACILITYs received by the reporting
call agent"
::= { statH323Entry 66 }
statH323MsgRELEASERcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RELEASEs received by the reporting
call agent"
::= { statH323Entry 67 }
statH323MsgREJECTRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 REJECTs received by the reporting
call agent"
::= { statH323Entry 68 }
statH323MsgPASSTHROURcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 PASS THROUGHs received by the
reporting call agent"
::= { statH323Entry 69 }
statH323MsgSETUPFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 SETUPs that failed. The failure is
due to one of the following scenarios: unable to send due to
full socket queue, unable to compose message due to invalid
socket, or lack of available memory."
::= { statH323Entry 70 }
statH323MsgCONNECTFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TBD"
::= { statH323Entry 71 }
statH323MsgALERTFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 ALERTs that failed. The
failure is due to one of the following scenarios: unable
to send due to full socket queue, unable to compose message
due to invalid socket, or lack of available memory."
::= { statH323Entry 72 }
statH323MsgINPROGRESSFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 IN PROGRESSs that failed. The
failure is due to one of the following scenarios: unable to
send due to full socket queue, unable to compose message due
to invalid socket, or lack of available memory."
::= { statH323Entry 73 }
statH323MsgCALLPROCEEDINGFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 CALL PROCEEDINGs that failed. The
failure is due to one of the following scenarios: unable to
send due to full socket queue, unable to compose message due
to invalid socket, or lack of available memory."
::= { statH323Entry 74 }
statH323MsgNOTIFYFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 NOTIFYs that failed. The failure
is due to one of the following scenarios: unable to send due
to full socket queue, unable to compose message due to
invalid socket, or lack of available memory."
::= { statH323Entry 75 }
statH323MsgINFOFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 INFOs that failed. The failure
is due to one of the following scenarios: unable to send due
to full socket queue, unable to compose message due to
invalid socket, or lack of available memory."
::= { statH323Entry 76 }
statH323MsgUSERINFOFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 USER INFOs that failed. The
failure is due to one of the following scenarios: unable to
send due to full socket queue, unable to compose message
due to invalid socket, or lack of available memory."
::= { statH323Entry 77 }
statH323MsgFACILITYFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 FACILITYs that failed. The failure
is due to one of the following scenarios: unable to send
due to full socket queue, unable to compose message due to
invalid socket, or lack of available memory."
::= { statH323Entry 78 }
statH323MsgRELEASEFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 RELEASEs that failed. The failure
is due to one of the following scenarios: unable to send due
to full socket queue, unable to compose message due to
invalid socket, or lack of available memory."
::= { statH323Entry 79 }
statH323MsgREJECTFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 REJECTs that failed. The failure
is due to one of the following scenarios: unable to send
due to full socket queue, unable to compose message due to
invalid socket, or lack of available memory."
::= { statH323Entry 80 }
statH323MsgPASSTHROUFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of H323 PASS THROUGHs that failed. The
failure is due to one of the following scenarios: unable to
send due to full socket queue, unable to compose message
due to invalid socket, or lack of available memory."
::= { statH323Entry 81 }
statH323MsgOCSETUPRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of incoming H323 SETUP messages received
by the reporting call agent that were rejected due to an
overload condition."
::= { statH323Entry 82 }
statISUPSGATable OBJECT-TYPE
SYNTAX SEQUENCE OF StatISUPSGAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ISDN User Part (SS7) signaling protocol related statistics - in a Signaling Gateway configuration."
::= { callAgentStatistics 16 }
statISUPSGAEntry OBJECT-TYPE
SYNTAX StatISUPSGAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for ISDN User Part (SS7) signaling protocol related statistics Table - in a Signaling Gateway configuration."
INDEX { statISUPSGAComponentID, statISUPSGATrkgrpId }
::= { statISUPSGATable 1 }
StatISUPSGAEntry ::= SEQUENCE {
statISUPSGAComponentID DisplayString,
statISUPSGADOW DayOfWeek,
statISUPSGATOD TimeOfDay,
statISUPSGATrkgrpId DisplayString,
statISUPSGAMsgTx Counter32,
statISUPSGAMsgRx Counter32,
statISUPSGAAcmTx Counter32,
statISUPSGAAcmRx Counter32,
statISUPSGAAnmTx Counter32,
statISUPSGAAnmRx Counter32,
statISUPSGABloTx Counter32,
statISUPSGABloRx Counter32,
statISUPSGABlaTx Counter32,
statISUPSGABlaRx Counter32,
statISUPSGACcrTx Counter32,
statISUPSGACcrRx Counter32,
statISUPSGACfnTx Counter32,
statISUPSGACfnRx Counter32,
statISUPSGACpgTx Counter32,
statISUPSGACpgRx Counter32,
statISUPSGACgbTx Counter32,
statISUPSGACgbRx Counter32,
statISUPSGACguTx Counter32,
statISUPSGACguRx Counter32,
statISUPSGACgbaTx Counter32,
statISUPSGACgbaRx Counter32,
statISUPSGACguaTx Counter32,
statISUPSGACguaRx Counter32,
statISUPSGACotTx Counter32,
statISUPSGACotRx Counter32,
statISUPSGACqmTx Counter32,
statISUPSGACqmRx Counter32,
statISUPSGACqrTx Counter32,
statISUPSGACqrRx Counter32,
statISUPSGACraTx Counter32,
statISUPSGACraRx Counter32,
statISUPSGACrmTx Counter32,
statISUPSGACrmRx Counter32,
statISUPSGACvrTx Counter32,
statISUPSGACvrRx Counter32,
statISUPSGACvtTx Counter32,
statISUPSGACvtRx Counter32,
statISUPSGAExmTx Counter32,
statISUPSGAExmRx Counter32,
statISUPSGAFacTx Counter32,
statISUPSGAFacRx Counter32,
statISUPSGAFotTx Counter32,
statISUPSGAFotRx Counter32,
statISUPSGAGrsTx Counter32,
statISUPSGAGrsRx Counter32,
statISUPSGAGraTx Counter32,
statISUPSGAGraRx Counter32,
statISUPSGAIamTx Counter32,
statISUPSGAIamRx Counter32,
statISUPSGAInfTx Counter32,
statISUPSGAInfRx Counter32,
statISUPSGAInrTx Counter32,
statISUPSGAInrRx Counter32,
statISUPSGALpaTx Counter32,
statISUPSGALpaRx Counter32,
statISUPSGAPamTx Counter32,
statISUPSGAPamRx Counter32,
statISUPSGARelTx Counter32,
statISUPSGARelRx Counter32,
statISUPSGARlcTx Counter32,
statISUPSGARlcRx Counter32,
statISUPSGARscTx Counter32,
statISUPSGARscRx Counter32,
statISUPSGAResTx Counter32,
statISUPSGAResRx Counter32,
statISUPSGASusTx Counter32,
statISUPSGASusRx Counter32,
statISUPSGAUblTx Counter32,
statISUPSGAUblRx Counter32,
statISUPSGAUbaTx Counter32,
statISUPSGAUbaRx Counter32,
statISUPSGAUsrTx Counter32,
statISUPSGAUsrRx Counter32,
statISUPSGAAbnormalRelRx Counter32,
statISUPSGAUnexpectMsgRx Counter32,
statISUPSGAUnrecogMsgRx Counter32,
statISUPSGAArrTx Counter32,
statISUPSGAArrRx Counter32,
statISUPSGACclTx Counter32,
statISUPSGACclRx Counter32,
statISUPSGAConTx Counter32,
statISUPSGAConRx Counter32,
statISUPSGACrgTx Counter32,
statISUPSGACrgRx Counter32,
statISUPSGAFarTx Counter32,
statISUPSGAFarRx Counter32,
statISUPSGAFrjTx Counter32,
statISUPSGAFrjRx Counter32,
statISUPSGAFwtTx Counter32,
statISUPSGAFwtRx Counter32,
statISUPSGAIdrTx Counter32,
statISUPSGAIdrRx Counter32,
statISUPSGAIrsTx Counter32,
statISUPSGAIrsRx Counter32,
statISUPSGALpmTx Counter32,
statISUPSGALpmRx Counter32,
statISUPSGANrmTx Counter32,
statISUPSGANrmRx Counter32,
statISUPSGAOprTx Counter32,
statISUPSGAOprRx Counter32,
statISUPSGAPriTx Counter32,
statISUPSGAPriRx Counter32,
statISUPSGASamTx Counter32,
statISUPSGASamRx Counter32,
statISUPSGASgmTx Counter32,
statISUPSGASgmRx Counter32,
statISUPSGAAbnormalRelTx Counter32,
statISUPSGAOlmTx Counter32,
statISUPSGAOlmRx Counter32,
statISUPSGAUpaTx Counter32,
statISUPSGAUpaRx Counter32,
statISUPSGAUptTx Counter32,
statISUPSGAUptRx Counter32,
statISUPSGAFAATx Counter32,
statISUPSGAFAARx Counter32,
statISUPSGAItxTx Counter32,
statISUPSGAItxRx Counter32,
statISUPSGATxaTx Counter32,
statISUPSGATxaRx Counter32
}
statISUPSGAComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ISUP SGA Component Identifier"
::= { statISUPSGAEntry 1 }
statISUPSGADOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statISUPSGAEntry 2 }
statISUPSGATOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statISUPSGAEntry 3 }
statISUPSGATrkgrpId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TrkGrp Identifier"
::= { statISUPSGAEntry 4 }
statISUPSGAMsgTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages sent on the reporting call agent"
::= { statISUPSGAEntry 5 }
statISUPSGAMsgRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of messages received on the reporting call agent"
::= { statISUPSGAEntry 6 }
statISUPSGAAcmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ACM messages sent on the reporting call agent"
::= { statISUPSGAEntry 7 }
statISUPSGAAcmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ACM messages received on the reporting call agent"
::= { statISUPSGAEntry 8 }
statISUPSGAAnmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ANM messages sent on the reporting call agent"
::= { statISUPSGAEntry 9 }
statISUPSGAAnmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ANM messages received on the reporting call agent"
::= { statISUPSGAEntry 10 }
statISUPSGABloTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BLO messages sent on the reporting call agent"
::= { statISUPSGAEntry 11 }
statISUPSGABloRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BLO messages received on the reporting call agent"
::= { statISUPSGAEntry 12 }
statISUPSGABlaTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BLA messages sent on the reporting call agent"
::= { statISUPSGAEntry 13 }
statISUPSGABlaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BLA messages received on the reporting call agent"
::= { statISUPSGAEntry 14 }
statISUPSGACcrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CCR messages sent on the reporting call agent"
::= { statISUPSGAEntry 15 }
statISUPSGACcrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CCR messages received on the reporting call agent"
::= { statISUPSGAEntry 16 }
statISUPSGACfnTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFN messages sent on the reporting call agent"
::= { statISUPSGAEntry 17 }
statISUPSGACfnRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CFN messages received on the reporting call agent"
::= { statISUPSGAEntry 18 }
statISUPSGACpgTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CPG messages sent on the reporting call agent"
::= { statISUPSGAEntry 19 }
statISUPSGACpgRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CPG messages received on the reporting call agent"
::= { statISUPSGAEntry 20 }
statISUPSGACgbTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CGB messages sent on the reporting call agent"
::= { statISUPSGAEntry 21 }
statISUPSGACgbRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CGB messages received on the reporting call agent"
::= { statISUPSGAEntry 22 }
statISUPSGACguTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CGU messages sent on the reporting call agent"
::= { statISUPSGAEntry 23 }
statISUPSGACguRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CGU messages received on the reporting call agent"
::= { statISUPSGAEntry 24 }
statISUPSGACgbaTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CGBA messages sent on the reporting call agent"
::= { statISUPSGAEntry 25 }
statISUPSGACgbaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CGBA messages received on the reporting call agent"
::= { statISUPSGAEntry 26 }
statISUPSGACguaTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CGUA messages sent on the reporting call agent"
::= { statISUPSGAEntry 27 }
statISUPSGACguaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CGUA messages received on the reporting call agent"
::= { statISUPSGAEntry 28 }
statISUPSGACotTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of COT messages sent on the reporting call agent"
::= { statISUPSGAEntry 29 }
statISUPSGACotRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of COT messages received on the reporting call agent"
::= { statISUPSGAEntry 30 }
statISUPSGACqmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CQM messages sent on the reporting call agent"
::= { statISUPSGAEntry 31 }
statISUPSGACqmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CQM messages received on the reporting call agent"
::= { statISUPSGAEntry 32 }
statISUPSGACqrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CQR messages sent on the reporting call agent"
::= { statISUPSGAEntry 33 }
statISUPSGACqrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CQR messages received on the reporting call agent"
::= { statISUPSGAEntry 34 }
statISUPSGACraTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRA messages sent on the reporting call agent"
::= { statISUPSGAEntry 35 }
statISUPSGACraRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRA messages received on the reporting call agent"
::= { statISUPSGAEntry 36 }
statISUPSGACrmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRM messages sent on the reporting call agent"
::= { statISUPSGAEntry 37 }
statISUPSGACrmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CRM messages received on the reporting call agent"
::= { statISUPSGAEntry 38 }
statISUPSGACvrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CVR messages sent on the reporting call agent"
::= { statISUPSGAEntry 39 }
statISUPSGACvrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CVR messages received on the reporting call agent"
::= { statISUPSGAEntry 40 }
statISUPSGACvtTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CVT messages sent on the reporting call agent"
::= { statISUPSGAEntry 41 }
statISUPSGACvtRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of CVT messages received on the reporting call agent"
::= { statISUPSGAEntry 42 }
statISUPSGAExmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of EXM messages sent on the reporting call agent"
::= { statISUPSGAEntry 43 }
statISUPSGAExmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of EXM messages received on the reporting call agent"
::= { statISUPSGAEntry 44 }
statISUPSGAFacTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of FAC messages sent on the reporting call agent"
::= { statISUPSGAEntry 45 }
statISUPSGAFacRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of FAC messages received on the reporting call agent"
::= { statISUPSGAEntry 46 }
statISUPSGAFotTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of FOT messages sent on the reporting call agent"
::= { statISUPSGAEntry 47 }
statISUPSGAFotRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of FOT messages received on the reporting call agent"
::= { statISUPSGAEntry 48 }
statISUPSGAGrsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of GRS messages sent on the reporting call agent"
::= { statISUPSGAEntry 49 }
statISUPSGAGrsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of GRS messages received on the reporting call agent"
::= { statISUPSGAEntry 50 }
statISUPSGAGraTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of GRA messages sent on the reporting call agent"
::= { statISUPSGAEntry 51 }
statISUPSGAGraRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of GRA messages received on the reporting call agent"
::= { statISUPSGAEntry 52 }
statISUPSGAIamTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IAM messages sent on the reporting call agent"
::= { statISUPSGAEntry 53 }
statISUPSGAIamRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of IAM messages received on the reporting call agent"
::= { statISUPSGAEntry 54 }
statISUPSGAInfTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INF messages sent on the reporting call agent"
::= { statISUPSGAEntry 55 }
statISUPSGAInfRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INF messages received on the reporting call agent"
::= { statISUPSGAEntry 56 }
statISUPSGAInrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INR messages sent on the reporting call agent"
::= { statISUPSGAEntry 57 }
statISUPSGAInrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of INR messages received on the reporting call agent"
::= { statISUPSGAEntry 58 }
statISUPSGALpaTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LPA messages sent on the reporting call agent"
::= { statISUPSGAEntry 59 }
statISUPSGALpaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of LPA messages received on the reporting call agent"
::= { statISUPSGAEntry 60 }
statISUPSGAPamTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PAM messages sent on the reporting call agent"
::= { statISUPSGAEntry 61 }
statISUPSGAPamRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of PAM messages received on the reporting call agent"
::= { statISUPSGAEntry 62 }
statISUPSGARelTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of REL messages sent on the reporting call agent"
::= { statISUPSGAEntry 63 }
statISUPSGARelRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of REL messages received on the reporting call agent"
::= { statISUPSGAEntry 64 }
statISUPSGARlcTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RLC messages sent on the reporting call agent"
::= { statISUPSGAEntry 65 }
statISUPSGARlcRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RLC messages received on the reporting call agent"
::= { statISUPSGAEntry 66 }
statISUPSGARscTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RSC messages sent on the reporting call agent"
::= { statISUPSGAEntry 67 }
statISUPSGARscRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RSC messages received on the reporting call agent"
::= { statISUPSGAEntry 68 }
statISUPSGAResTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RES messages sent on the reporting call agent"
::= { statISUPSGAEntry 69 }
statISUPSGAResRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RES messages received on the reporting call agent"
::= { statISUPSGAEntry 70 }
statISUPSGASusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SUS messages sent on the reporting call agent"
::= { statISUPSGAEntry 71 }
statISUPSGASusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SUS messages received on the reporting call agent"
::= { statISUPSGAEntry 72 }
statISUPSGAUblTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UBL messages sent on the reporting call agent"
::= { statISUPSGAEntry 73 }
statISUPSGAUblRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UBL messages received on the reporting call agent"
::= { statISUPSGAEntry 74 }
statISUPSGAUbaTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UBA messages sent on the reporting call agent"
::= { statISUPSGAEntry 75 }
statISUPSGAUbaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of UBA messages received on the reporting call agent"
::= { statISUPSGAEntry 76 }
statISUPSGAUsrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of USR messages sent on the reporting call agent"
::= { statISUPSGAEntry 77 }
statISUPSGAUsrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of USR messages received on the reporting call agent"
::= { statISUPSGAEntry 78 }
statISUPSGAAbnormalRelRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RELs received with ac cause other than NORMAL on the reporting call agent"
::= { statISUPSGAEntry 79 }
statISUPSGAUnexpectMsgRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unexpected messages received on the reporting call agent"
::= { statISUPSGAEntry 80 }
statISUPSGAUnrecogMsgRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of unrecognized messages received on the reporting call agent"
::= { statISUPSGAEntry 81 }
statISUPSGAArrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Automatic Re-Route messages sent on the reporting trunk group."
::= { statISUPSGAEntry 82 }
statISUPSGAArrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Automatic Re-Route messages received on the reporting trunk group."
::= { statISUPSGAEntry 83 }
statISUPSGACclTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Calling Party Clear messages sent on the reporting trunk group."
::= { statISUPSGAEntry 84 }
statISUPSGACclRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Calling Party Clear messages received on the reporting trunk group."
::= { statISUPSGAEntry 85 }
statISUPSGAConTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Connect messages sent on the reporting trunk group."
::= { statISUPSGAEntry 86 }
statISUPSGAConRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Connect messages received on the reporting trunk group."
::= { statISUPSGAEntry 87 }
statISUPSGACrgTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Charge Information messages sent on the reporting trunk group."
::= { statISUPSGAEntry 88 }
statISUPSGACrgRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Charge Information messages received on the reporting trunk group."
::= { statISUPSGAEntry 89 }
statISUPSGAFarTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Facility Request messages sent on the reporting trunk group."
::= { statISUPSGAEntry 90 }
statISUPSGAFarRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Facility Request messages received on the reporting trunk group."
::= { statISUPSGAEntry 91 }
statISUPSGAFrjTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Facility Reject messages sent on the reporting trunk group."
::= { statISUPSGAEntry 92 }
statISUPSGAFrjRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Facility Reject messages received on the reporting trunk group."
::= { statISUPSGAEntry 93 }
statISUPSGAFwtTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Forward Transfer messages sent on the reporting trunk group."
::= { statISUPSGAEntry 94 }
statISUPSGAFwtRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Forward Transfer messages received on the reporting trunk group."
::= { statISUPSGAEntry 95 }
statISUPSGAIdrTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Identification Request messages sent on the reporting trunk group."
::= { statISUPSGAEntry 96 }
statISUPSGAIdrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Identification Request messages received on the reporting trunk group."
::= { statISUPSGAEntry 97 }
statISUPSGAIrsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Identification Response messages sent on the reporting trunk group."
::= { statISUPSGAEntry 98 }
statISUPSGAIrsRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Identification Response messages received on the reporting trunk group."
::= { statISUPSGAEntry 99 }
statISUPSGALpmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Loop Prevention messages sent on the reporting trunk group."
::= { statISUPSGAEntry 100 }
statISUPSGALpmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Loop Prevention messages received on the reporting trunk group."
::= { statISUPSGAEntry 101 }
statISUPSGANrmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Network Resource Management messages sent on the reporting trunk group."
::= { statISUPSGAEntry 102 }
statISUPSGANrmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NRM messages received on the reporting trunk group."
::= { statISUPSGAEntry 103 }
statISUPSGAOprTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Operator messages sent on the reporting trunk group."
::= { statISUPSGAEntry 104 }
statISUPSGAOprRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Operator messages received on the reporting trunk group."
::= { statISUPSGAEntry 105 }
statISUPSGAPriTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Pre-Release Information messages sent on the reporting trunk group."
::= { statISUPSGAEntry 106 }
statISUPSGAPriRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Pre-Release Information messages received on the reporting trunk group."
::= { statISUPSGAEntry 107 }
statISUPSGASamTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Subsequent Address messages sent on the reporting trunk group."
::= { statISUPSGAEntry 108 }
statISUPSGASamRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Subsequent Address messages received on the reporting trunk group."
::= { statISUPSGAEntry 109 }
statISUPSGASgmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Segmentation messages sent on the reporting trunk group."
::= { statISUPSGAEntry 110 }
statISUPSGASgmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Segmentation messages received on the reporting trunk group."
::= { statISUPSGAEntry 111 }
statISUPSGAAbnormalRelTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Release messages sent with a cause other than NORMAL on the reporting trunk group."
::= { statISUPSGAEntry 112 }
statISUPSGAOlmTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Overload messages sent on the reporting trunk group."
::= { statISUPSGAEntry 113 }
statISUPSGAOlmRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Overload messages received on the reporting trunk group."
::= { statISUPSGAEntry 114 }
statISUPSGAUpaTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of User Part Acknowledgement messages sent on the reporting trunk group."
::= { statISUPSGAEntry 115 }
statISUPSGAUpaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of User Part Acknowledgement messages received on the reporting trunk group."
::= { statISUPSGAEntry 116 }
statISUPSGAUptTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of User Part Test messages sent on the reporting trunk group."
::= { statISUPSGAEntry 117 }
statISUPSGAUptRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of User Part Test messages received on the reporting trunk group."
::= { statISUPSGAEntry 118 }
statISUPSGAFAATx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Facility Accepted messages sent on the reporting trunk group."
::= { statISUPSGAEntry 119 }
statISUPSGAFAARx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Facility Accepted messages received on the reporting trunk group."
::= { statISUPSGAEntry 120 }
statISUPSGAItxTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Charge Unit messages sent on the reporting trunk group"
::= { statISUPSGAEntry 121 }
statISUPSGAItxRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Charge Unit messages received on the reporting trunk group"
::= { statISUPSGAEntry 122 }
statISUPSGATxaTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Charging Acknowledgement messages sent on the reporting trunk group"
::= { statISUPSGAEntry 123 }
statISUPSGATxaRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of Charging Acknowledgement messages received on the reporting trunk group"
::= { statISUPSGAEntry 124 }
statDQOSTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatDQOSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Dynamic Quality of Service related statistics."
::= { callAgentStatistics 17 }
statDQOSEntry OBJECT-TYPE
SYNTAX StatDQOSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Dynamic Quality of Service related statistics Table."
INDEX { statDQOSComponentID, statDQOSAggrId }
::= { statDQOSTable 1 }
StatDQOSEntry ::= SEQUENCE {
statDQOSComponentID DisplayString,
statDQOSDOW DayOfWeek,
statDQOSTOD TimeOfDay,
statDQOSAggrId DisplayString,
statDQOSGateOpenRx Counter32,
statDQOSGateCloseRx Counter32,
statDQOSGateDeleteTx Counter32,
statDQOSGateDeleteAckRx Counter32,
statDQOSGateDeleteErrRx Counter32,
statDQOSGateSetTx Counter32,
statDQOSGateSetAckRx Counter32,
statDQOSGateSetErrRx Counter32,
statDQOSGateInfoTx Counter32,
statDQOSGateInfoAckRx Counter32,
statDQOSGateInfoErrRx Counter32
}
statDQOSComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DQOS Component Identifier"
::= { statDQOSEntry 1 }
statDQOSDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statDQOSEntry 2 }
statDQOSTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statDQOSEntry 3 }
statDQOSAggrId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AGGR Identifier"
::= { statDQOSEntry 4 }
statDQOSGateOpenRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Open messages received by the reporting BTS."
::= { statDQOSEntry 5 }
statDQOSGateCloseRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Open messages received by the reporting BTS."
::= { statDQOSEntry 6 }
statDQOSGateDeleteTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Delete messages sent from the reporting BTS."
::= { statDQOSEntry 7 }
statDQOSGateDeleteAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Delete-Ack messages received by the reporting BTS."
::= { statDQOSEntry 8 }
statDQOSGateDeleteErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Delete-Err messages received by the reporting BTS."
::= { statDQOSEntry 9 }
statDQOSGateSetTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Set messages sent from the reporting BTS."
::= { statDQOSEntry 10 }
statDQOSGateSetAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Set-Ack messages received by the reporting BTS."
::= { statDQOSEntry 11 }
statDQOSGateSetErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Set-Err messages received by the reporting BTS."
::= { statDQOSEntry 12 }
statDQOSGateInfoTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Info messages sent from the reporting BTS."
::= { statDQOSEntry 13 }
statDQOSGateInfoAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Info-Ack messages received by the reporting BTS."
::= { statDQOSEntry 14 }
statDQOSGateInfoErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DQOS Gate-Info-Err messages received by the reporting BTS."
::= { statDQOSEntry 15 }
statCallToolsTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatCallToolsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Metrics related to invocations of the Translation Verification Tools."
::= { callAgentStatistics 18 }
statCallToolsEntry OBJECT-TYPE
SYNTAX StatCallToolsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for metrics related to invocations of the Translation
Verification Tools related statistics Table."
INDEX { statCallToolsComponentID }
::= { statCallToolsTable 1 }
StatCallToolsEntry ::= SEQUENCE {
statCallToolsComponentID DisplayString,
statCallToolsDOW DayOfWeek,
statCallToolsTOD TimeOfDay,
statCallToolsTrunkTransAttmp Counter32,
statCallToolsTrunkTransSucc Counter32,
statCallToolsLineTransAttmp Counter32,
statCallToolsLineTransSucc Counter32
}
statCallToolsComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Call Tools Component Identifier"
::= { statCallToolsEntry 1 }
statCallToolsDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statCallToolsEntry 2 }
statCallToolsTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statCallToolsEntry 3 }
statCallToolsTrunkTransAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the TVT process on the reporting call
agent received a request to perform a trunk based translation."
::= { statCallToolsEntry 4 }
statCallToolsTrunkTransSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the TVT process on the reporting call
agent received a request to perform a trunk based translation and
completed it successfully."
::= { statCallToolsEntry 5 }
statCallToolsLineTransSucc OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the TVT process on the reporting call
agent received a request to perform a line based translation."
::= { statCallToolsEntry 6 }
statCallToolsLineTransAttmp OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the TVT process on the reporting call
agent received a request to perform a line based translation and
completed it successfully."
::= { statCallToolsEntry 7 }
statPCMMTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatPCMMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Packet Cable Multimedia Measurement information"
::= { callAgentStatistics 19 }
statPCMMEntry OBJECT-TYPE
SYNTAX StatPCMMEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Packet Cable Multimedia Measurement information Table."
INDEX { statPCMMComponentID, statPCMMAggrId }
::= { statPCMMTable 1 }
StatPCMMEntry ::= SEQUENCE {
statPCMMComponentID DisplayString,
statPCMMDOW DayOfWeek,
statPCMMTOD TimeOfDay,
statPCMMAggrId DisplayString,
statPCMMGateInfoTx Counter32,
statPCMMGateInfoAckRx Counter32,
statPCMMGateInfoErrRx Counter32,
statPCMMGateSetTx Counter32,
statPCMMGateSetAckRx Counter32,
statPCMMGateSetErrRx Counter32,
statPCMMGateDeleteTx Counter32,
statPCMMGateDeleteAckRx Counter32,
statPCMMGateDeleteErrRx Counter32,
statPCMMGateReportDelRx Counter32
}
statPCMMComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PCMM Component Identifier"
::= { statPCMMEntry 1 }
statPCMMDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statPCMMEntry 2 }
statPCMMTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statPCMMEntry 3 }
statPCMMAggrId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AGGR Identifier"
::= { statPCMMEntry 4 }
statPCMMGateInfoTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Info messages sent from the reporting BTS."
::= { statPCMMEntry 5 }
statPCMMGateInfoAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Info-Ack messages received by the reporting BTS."
::= { statPCMMEntry 6 }
statPCMMGateInfoErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Info-Err messages received by the reporting BTS."
::= { statPCMMEntry 7 }
statPCMMGateSetTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Open messages received by the reporting BTS."
::= { statPCMMEntry 8 }
statPCMMGateSetAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Open messages received by the reporting BTS."
::= { statPCMMEntry 9 }
statPCMMGateSetErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Delete messages sent from the reporting BTS."
::= { statPCMMEntry 10 }
statPCMMGateDeleteTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Delete-Ack messages received by the reporting BTS."
::= { statPCMMEntry 11 }
statPCMMGateDeleteAckRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Delete-Err messages received by the reporting BTS."
::= { statPCMMEntry 12 }
statPCMMGateDeleteErrRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Set messages sent from the reporting BTS."
::= { statPCMMEntry 13 }
statPCMMGateReportDelRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PCMM Gate-Report-Delete messages received by the reporting BTS."
::= { statPCMMEntry 14 }
statBillingTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatBillingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Billing Statistics."
::= { emsStatistics 4 }
statBillingEntry OBJECT-TYPE
SYNTAX StatBillingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Billing Statistics Table."
INDEX { statBillingComponentID }
::= { statBillingTable 1 }
StatBillingEntry ::= SEQUENCE {
statBillingComponentID DisplayString,
statBillingDOW DayOfWeek,
statBillingTOD TimeOfDay,
statBillingTestCalls Counter32,
statBillingIntlCalls Counter32,
statBillingLocalCalls Counter32,
statBillingTollCalls Counter32,
statBillingInterlataCalls Counter32,
statBillingTandemCalls Counter32,
statBillingEmergencyCalls Counter32,
statBillingNonEmergencyCalls Counter32,
statBillingDirAssistCalls Counter32,
statBillingDirAssistTollCalls Counter32,
statBillingRepairCalls Counter32,
statBillingRelayCalls Counter32,
statBillingBusinessCalls Counter32,
statBillingTollfreeCalls Counter32,
statBilling900Calls Counter32,
statBillingPCSCalls Counter32,
statBillingVacantCalls Counter32,
statBillingInvalidCalls Counter32,
statBilling500Calls Counter32,
statBilling700Calls Counter32,
statBilling976Calls Counter32,
statBillingUndefinedCalls Counter32,
statBillingLRNCalls Counter32,
statBillingExtensionCalls Counter32,
statBillingCutThruCalls Counter32,
statBillingCallTypeOper Counter32,
statBillingCallTypeCarrOper Counter32,
statBillingCallTypeOperAssist Counter32,
statBillingCallTypeBlv Counter32,
statBillingCallTypeSpeedDial Counter32,
statBillingCallTypeNational Counter32,
statBillingCallTypeTW Counter32,
statBillingCallTypeInfo Counter32,
statBillingCallTypePremium Counter32,
statBillingCallTypeAttendant Counter32,
statBillingCallTypeNAS Counter32,
statBillingCallTypePolice Counter32,
statBillingCallTypeFire Counter32,
statBillingCallTypeAmbulance Counter32,
statBillingCallTypeTime Counter32,
statBillingCallTypeTraffic Counter32,
statBillingEMAcked Counter32,
statBillingEMLogged Counter32,
statBillingEMRetrans Counter32,
statBillingCallTypeWeather Counter32,
statBillingTotalLBTest Counter32,
statBillingTotalIntlOpr Counter32,
statBillingTotalNatOpr Counter32,
statBillingAirlines Counter32,
statBillingRailways Counter32,
statBillingSvcCode Counter32,
statBillingIntlWZ1 Counter32,
statBillingCNA Counter32,
statBillingDAInter Counter32,
statBillingDAIntl Counter32,
statBillingUAN Counter32,
statBillingMOBILE Counter32,
statBillingWAKEUP Counter32,
statBillingSIPT Counter32,
statBillingOHD Counter32,
statBillingTAT Counter32,
statBillingREFER Counter32
}
statBillingComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Billing Component Identifier"
::= { statBillingEntry 1 }
statBillingDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statBillingEntry 2 }
statBillingTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statBillingEntry 3 }
statBillingTestCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type test call created by the
reporting element management system"
::= { statBillingEntry 4 }
statBillingIntlCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type international created by
the reporting element management system"
::= { statBillingEntry 5 }
statBillingLocalCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type local created by the
reporting element management system"
::= { statBillingEntry 6 }
statBillingTollCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type toll created by the
reporting element management system"
::= { statBillingEntry 7 }
statBillingInterlataCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type interlata created by the
reporting element management system"
::= { statBillingEntry 8 }
statBillingTandemCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type tandem created by the
reporting element management system"
::= { statBillingEntry 9 }
statBillingEmergencyCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type emergency created by the
reporting element management system"
::= { statBillingEntry 10 }
statBillingNonEmergencyCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type non-emergency created by
the reporting element management system"
::= { statBillingEntry 11 }
statBillingDirAssistCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type directory assistance
created by the reporting element management system"
::= { statBillingEntry 12 }
statBillingDirAssistTollCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type directory assistance
toll created by the reporting element management system"
::= { statBillingEntry 13 }
statBillingRepairCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type repair created by the
reporting element management system"
::= { statBillingEntry 14 }
statBillingRelayCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type relay created by the
reporting element management system"
::= { statBillingEntry 15 }
statBillingBusinessCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type business created by the
reporting element management system"
::= { statBillingEntry 16 }
statBillingTollfreeCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type toll free created by the
reporting element management system"
::= { statBillingEntry 17 }
statBilling900Calls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type 900 created by the
reporting element management system"
::= { statBillingEntry 18 }
statBillingPCSCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type pcs created by the
reporting element management system"
::= { statBillingEntry 19 }
statBillingVacantCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type vacant created by the
reporting element management system"
::= { statBillingEntry 20 }
statBillingInvalidCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type invalid created by the
reporting element management system"
::= { statBillingEntry 21 }
statBilling500Calls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type 500 created by the
reporting element management system"
::= { statBillingEntry 22 }
statBilling700Calls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type 700 created by the
reporting element management system"
::= { statBillingEntry 23 }
statBilling976Calls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type 976 created by the
reporting element management system"
::= { statBillingEntry 24 }
statBillingUndefinedCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type none created by the
reporting element management system"
::= { statBillingEntry 25 }
statBillingLRNCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type lrn created by the
reporting element management system"
::= { statBillingEntry 26 }
statBillingExtensionCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type extension created by the
reporting element management system"
::= { statBillingEntry 27 }
statBillingCutThruCalls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type cut thru created by the
reporting element management system"
::= { statBillingEntry 28 }
statBillingCallTypeOper OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type cut operator created by
the reporting element management system"
::= { statBillingEntry 29 }
statBillingCallTypeCarrOper OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type carrier operator created
by the reporting element management system"
::= { statBillingEntry 30 }
statBillingCallTypeOperAssist OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type operator assisted
created by the reporting element management system"
::= { statBillingEntry 31 }
statBillingCallTypeBlv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type busy line verification
created by the reporting element management system"
::= { statBillingEntry 32 }
statBillingCallTypeSpeedDial OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type speed dial created by
the reporting element management system"
::= { statBillingEntry 33 }
statBillingCallTypeNational OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type national (NANP) created
by the reporting element management system"
::= { statBillingEntry 34 }
statBillingCallTypeTW OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type time and weather created
by the reporting element management system"
::= { statBillingEntry 35 }
statBillingCallTypeInfo OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type information (i.e. 976
calls) created by the reporting element management system"
::= { statBillingEntry 36 }
statBillingCallTypePremium OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type premium (i.e. 900
calls) created by the reporting element management system"
::= { statBillingEntry 37 }
statBillingCallTypeAttendant OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type attendant created by the
reporting element management system"
::= { statBillingEntry 38 }
statBillingCallTypeNAS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type nascreated by the
reporting element management system"
::= { statBillingEntry 39 }
statBillingCallTypePolice OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type police created by the
reporting element management system"
::= { statBillingEntry 40 }
statBillingCallTypeFire OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type fire created by the
reporting element management system"
::= { statBillingEntry 41 }
statBillingCallTypeAmbulance OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type ambulance created by the
reporting element management system"
::= { statBillingEntry 42 }
statBillingCallTypeTime OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type time created by the
reporting element management system"
::= { statBillingEntry 43 }
statBillingCallTypeTraffic OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type traffic created by the
reporting element management system"
::= { statBillingEntry 44 }
statBillingEMAcked OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"EM Acked"
::= { statBillingEntry 45 }
statBillingEMLogged OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"EM Logged"
::= { statBillingEntry 46 }
statBillingEMRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"EM Retrans"
::= { statBillingEntry 47 }
statBillingCallTypeWeather OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail block of type weather created by the
reporting element management system"
::= { statBillingEntry 48 }
statBillingTotalLBTest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type Loopback Test created by the reporting element management system (This counter is not pegged in this release)"
::= { statBillingEntry 49 }
statBillingTotalIntlOpr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type International Operator created by the reporting element management system"
::= { statBillingEntry 50 }
statBillingTotalNatOpr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type National Operator created by the reporting element management system"
::= { statBillingEntry 51 }
statBillingAirlines OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type Airlines created by the reporting element management system"
::= { statBillingEntry 52 }
statBillingRailways OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type Railways created by the reporting element management system"
::= { statBillingEntry 53 }
statBillingSvcCode OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type Service Code created by the reporting element management system"
::= { statBillingEntry 54 }
statBillingIntlWZ1 OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type International World Zone 1 created by the reporting element management system"
::= { statBillingEntry 55 }
statBillingCNA OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type Calling Number Announcement created by the reporting element management system"
::= { statBillingEntry 56 }
statBillingDAInter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type Directory Assistance Interlata created by the reporting element management system"
::= { statBillingEntry 57 }
statBillingDAIntl OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type Directory Assistance International created by the reporting element management system"
::= { statBillingEntry 58 }
statBillingUAN OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type Universal Access Number created by the reporting element management system"
::= { statBillingEntry 59 }
statBillingMOBILE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type MOBILE created by the reporting element management system"
::= { statBillingEntry 60 }
statBillingWAKEUP OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type WAKEUP created by the reporting element management system"
::= { statBillingEntry 61 }
statBillingSIPT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type SIP TRIGGER created by the reporting element management system"
::= { statBillingEntry 62 }
statBillingOHD OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type OHD created by the reporting element management system"
::= { statBillingEntry 63 }
statBillingTAT OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type TAT created by the reporting element management system"
::= { statBillingEntry 64 }
statBillingREFER OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number call detail blocks of type REFER created by the reporting element management system"
::= { statBillingEntry 65 }
statSNMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatSNMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SNMP Statistics ."
::= { emsStatistics 2 }
statSNMPEntry OBJECT-TYPE
SYNTAX StatSNMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for SNMP Statistics Table."
INDEX { statSNMPComponentID }
::= { statSNMPTable 1 }
StatSNMPEntry ::= SEQUENCE {
statSNMPComponentID DisplayString,
statSNMPDOW DayOfWeek,
statSNMPTOD TimeOfDay,
statSNMPTrapsXmit Counter32,
statSNMPSetsRcv Counter32,
statSNMPSetsXmit Counter32,
statSNMPGetsRcv Counter32,
statSNMPGetsXmit Counter32,
statSNMPGetNextsRcv Counter32,
statSNMPGetNextsXmit Counter32
}
statSNMPComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNMP Component Identifier"
::= { statSNMPEntry 1 }
statSNMPDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statSNMPEntry 3 }
statSNMPTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statSNMPEntry 4 }
statSNMPTrapsXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SNMP TRAPs generated by the reporting
element management system"
::= { statSNMPEntry 5 }
statSNMPSetsRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SNMP SETs received by the reporting
element management system"
::= { statSNMPEntry 6 }
statSNMPSetsXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SNMP SETs transmitted by the reporting
element management system"
::= { statSNMPEntry 7 }
statSNMPGetsRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SNMP GETs received by the reporting
element management system"
::= { statSNMPEntry 8 }
statSNMPGetsXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SNMP GETs transmitted by the reporting
element management system"
::= { statSNMPEntry 9 }
statSNMPGetNextsRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SNMP GET NEXTs received by the reporting
element management system"
::= { statSNMPEntry 10 }
statSNMPGetNextsXmit OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SNMP GET NEXTs transmitted by the
reporting element management system"
::= { statSNMPEntry 11 }
statEMATable OBJECT-TYPE
SYNTAX SEQUENCE OF StatEMAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event Messaging Billing related statistics."
::= { emsStatistics 5 }
statEMAEntry OBJECT-TYPE
SYNTAX StatEMAEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Event Messaging Billing related statistics Table."
INDEX { statEMAComponentID }
::= { statEMATable 1 }
StatEMAEntry ::= SEQUENCE {
statEMAComponentID DisplayString,
statEMADOW DayOfWeek,
statEMATOD TimeOfDay,
statEMABillingEMAcked Counter32,
statEMABillingEMLogged Counter32,
statEMABillingEMRetrans Counter32
}
statEMAComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"EMA Component Identifier"
::= { statEMAEntry 1 }
statEMADOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statEMAEntry 2 }
statEMATOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statEMAEntry 3 }
statEMABillingEMAcked OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of event messages acknowledged by the Record
Keeping System."
::= { statEMAEntry 4 }
statEMABillingEMLogged OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of event messages written to disk but not sent to
any RKS."
::= { statEMAEntry 5 }
statEMABillingEMRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of event messages that were retransmitted due to
a lack of acknowledgement by the Record Keeping System."
::= { statEMAEntry 6 }
statDiskUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatDiskUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Disk Usage Statistics ."
::= { generalTrafficMeasurement 1 }
statDiskUsageEntry OBJECT-TYPE
SYNTAX StatDiskUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Disk Usage Table."
INDEX { statDiskUsageNode, statDiskUsageName }
::= { statDiskUsageTable 1 }
StatDiskUsageEntry ::= SEQUENCE {
statDiskUsageNode DisplayString,
statDiskUsageDOW DayOfWeek,
statDiskUsageTOD TimeOfDay,
statDiskUsageName DisplayString,
statDiskUsageTotalAvail Counter32,
statDiskUsageTotalUsed Counter32
}
statDiskUsageNode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disk Usage Component Identifier"
::= { statDiskUsageEntry 1 }
statDiskUsageDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statDiskUsageEntry 2 }
statDiskUsageTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statDiskUsageEntry 3 }
statDiskUsageName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The disk name should be a valid disk name supported by the OS"
::= { statDiskUsageEntry 4 }
statDiskUsageTotalAvail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Size Available"
::= { statDiskUsageEntry 5 }
statDiskUsageTotalUsed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Size Used"
::= { statDiskUsageEntry 6 }
statSystemUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatSystemUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"System Usage Statistics."
::= { generalTrafficMeasurement 2 }
statSystemUsageEntry OBJECT-TYPE
SYNTAX StatSystemUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for System Usage Statistics Table."
INDEX { statSystemUsageNode }
::= { statSystemUsageTable 1 }
StatSystemUsageEntry ::= SEQUENCE {
statSystemUsageNode DisplayString,
statSystemUsageDOW DayOfWeek,
statSystemUsageTOD TimeOfDay,
statSystemUsageLoadAverage1Min DisplayString,
statSystemUsageLoadAverage5Min DisplayString,
statSystemUsageLoadAverage15Min DisplayString
}
statSystemUsageNode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SystemUsage Component Identifier"
::= { statSystemUsageEntry 1 }
statSystemUsageDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statSystemUsageEntry 2 }
statSystemUsageTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statSystemUsageEntry 3 }
statSystemUsageLoadAverage1Min OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Load Average over 1 min"
::= { statSystemUsageEntry 4 }
statSystemUsageLoadAverage5Min OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Load Average over 5 min"
::= { statSystemUsageEntry 5 }
statSystemUsageLoadAverage15Min OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Load Average over 15 min"
::= { statSystemUsageEntry 6 }
statCPUUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatCPUUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CPU Usage Statistics."
::= { generalTrafficMeasurement 3 }
statCPUUsageEntry OBJECT-TYPE
SYNTAX StatCPUUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for CPU Usage Table."
INDEX { statCPUUsageNode, statCPUUsageNum }
::= { statCPUUsageTable 1 }
StatCPUUsageEntry ::= SEQUENCE {
statCPUUsageNode DisplayString,
statCPUUsageDOW DayOfWeek,
statCPUUsageTOD TimeOfDay,
statCPUUsageNum DisplayString,
statCPUUsageIdle DisplayString,
statCPUUsageUser DisplayString,
statCPUUsageSystem DisplayString,
statCPUUsageIOWait DisplayString
}
statCPUUsageNode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CPU Usage Component Identifier"
::= { statCPUUsageEntry 1 }
statCPUUsageDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statCPUUsageEntry 2 }
statCPUUsageTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statCPUUsageEntry 3 }
statCPUUsageNum OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Number Of the CPU "
::= { statCPUUsageEntry 4 }
statCPUUsageIdle OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..39 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Clock Ticks"
::= { statCPUUsageEntry 5 }
statCPUUsageUser OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..39 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User who started the task"
::= { statCPUUsageEntry 6 }
statCPUUsageSystem OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..39 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System"
::= { statCPUUsageEntry 7 }
statCPUUsageIOWait OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..39 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IOWait"
::= { statCPUUsageEntry 8 }
statDiskIOUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatDiskIOUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Disk IO Usage Statistics."
::= { generalTrafficMeasurement 4 }
statDiskIOUsageEntry OBJECT-TYPE
SYNTAX StatDiskIOUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Disk Access Table."
INDEX { statDiskIOUsageNode, statDiskIOUsageDeviceName }
::= { statDiskIOUsageTable 1 }
StatDiskIOUsageEntry ::= SEQUENCE {
statDiskIOUsageNode DisplayString,
statDiskIOUsageDOW DayOfWeek,
statDiskIOUsageTOD TimeOfDay,
statDiskIOUsageDeviceName DisplayString,
statDiskIOUsageBytesRead DisplayString,
statDiskIOUsageBytesWritten DisplayString,
statDiskIOUsageReadOperation DisplayString,
statDiskIOUsageWriteOperation DisplayString
}
statDiskIOUsageNode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disk IO Usage Component Identifier"
::= { statDiskIOUsageEntry 1 }
statDiskIOUsageDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statDiskIOUsageEntry 2 }
statDiskIOUsageTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statDiskIOUsageEntry 3 }
statDiskIOUsageDeviceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Name "
::= { statDiskIOUsageEntry 4 }
statDiskIOUsageBytesRead OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Bytes Read"
::= { statDiskIOUsageEntry 5 }
statDiskIOUsageBytesWritten OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Bytes Written"
::= { statDiskIOUsageEntry 6 }
statDiskIOUsageReadOperation OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Read operations"
::= { statDiskIOUsageEntry 7 }
statDiskIOUsageWriteOperation OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number or Write operations"
::= { statDiskIOUsageEntry 8 }
statMemoryUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatMemoryUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Memory Usage Statistics."
::= { generalTrafficMeasurement 5 }
statMemoryUsageEntry OBJECT-TYPE
SYNTAX StatMemoryUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Memory Usage Table."
INDEX { statMemoryUsageNode }
::= { statMemoryUsageTable 1 }
StatMemoryUsageEntry ::= SEQUENCE {
statMemoryUsageNode DisplayString,
statMemoryUsageDOW DayOfWeek,
statMemoryUsageTOD TimeOfDay,
statMemoryUsageTotalMem Counter32,
statMemoryUsageFreeMem Counter32,
statMemoryUsageTotalSwap Counter32,
statMemoryUsageFreeSwap Counter32
}
statMemoryUsageNode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Memory Usage Component Identifier"
::= { statMemoryUsageEntry 1 }
statMemoryUsageDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statMemoryUsageEntry 2 }
statMemoryUsageTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statMemoryUsageEntry 3 }
statMemoryUsageTotalMem OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Memory Available"
::= { statMemoryUsageEntry 4 }
statMemoryUsageFreeMem OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free Memory"
::= { statMemoryUsageEntry 5 }
statMemoryUsageTotalSwap OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total Swap Available"
::= { statMemoryUsageEntry 6 }
statMemoryUsageFreeSwap OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Free Swap"
::= { statMemoryUsageEntry 7 }
statNetworkIOUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatNetworkIOUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Network IO Statistics."
::= { generalTrafficMeasurement 6 }
statNetworkIOUsageEntry OBJECT-TYPE
SYNTAX StatNetworkIOUsageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Hardware IO Table."
INDEX { statNetworkIOUsageNode, statNetworkIOUsageDeviceName }
::= { statNetworkIOUsageTable 1 }
StatNetworkIOUsageEntry ::= SEQUENCE {
statNetworkIOUsageNode DisplayString,
statNetworkIOUsageDOW DayOfWeek,
statNetworkIOUsageTOD TimeOfDay,
statNetworkIOUsageDeviceName DisplayString,
statNetworkIOUsageInPacketsPerSec DisplayString,
statNetworkIOUsageInBytesPerSec DisplayString,
statNetworkIOUsageOutPacketsPerSec DisplayString,
statNetworkIOUsageOutBytesPerSec DisplayString
}
statNetworkIOUsageNode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NetworkIO Usage Component Identifier"
::= { statNetworkIOUsageEntry 1 }
statNetworkIOUsageDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statNetworkIOUsageEntry 2 }
statNetworkIOUsageTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statNetworkIOUsageEntry 3 }
statNetworkIOUsageDeviceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Device Name"
::= { statNetworkIOUsageEntry 4 }
statNetworkIOUsageInPacketsPerSec OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input packets per second"
::= { statNetworkIOUsageEntry 5 }
statNetworkIOUsageInBytesPerSec OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Input bytes per second"
::= { statNetworkIOUsageEntry 6 }
statNetworkIOUsageOutPacketsPerSec OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out packets per second"
::= { statNetworkIOUsageEntry 7 }
statNetworkIOUsageOutBytesPerSec OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0..42 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Out bytes per second"
::= { statNetworkIOUsageEntry 8 }
statDiameterTable OBJECT-TYPE
SYNTAX SEQUENCE OF StatDiameterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"HSS related Measurements"
::= { emsStatistics 6 }
statDiameterEntry OBJECT-TYPE
SYNTAX StatDiameterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for HSS Diameter related statistics Table."
INDEX { statDiameterComponentID }
::= { statDiameterTable 1 }
StatDiameterEntry ::= SEQUENCE {
statDiameterComponentID DisplayString,
statDiameterDOW DayOfWeek,
statDiameterTOD TimeOfDay,
statDIRxDeviceWatchdogReq Counter32,
statDITxDeviceWatchdogReq Counter32,
statDIRxDeviceWatchdogAns Counter32,
statDITxDeviceWatchdogAns Counter32,
statDIRxCapabilityExchangeReq Counter32,
statDITxCapabilityExchangeReq Counter32,
statDIRxCapabilityExchangeAns Counter32,
statDITxCapabilityExchangeAns Counter32,
statDIRxDisconnectPeerReq Counter32,
statDITxDisconnectPeerReq Counter32,
statDIRxDisconnectPeerAns Counter32,
statDITxDisconnectPeerAns Counter32,
statDIRxSessionTerminationReq Counter32,
statDITxSessionTerminationReq Counter32,
statDIRxSessionTerminationAns Counter32,
statDITxSessionTerminationAns Counter32,
statDIRxAbortSessionReq Counter32,
statDITxAbortSessionReq Counter32,
statDIRxAbortSessionAns Counter32,
statDITxAbortSessionAns Counter32,
statDIUserDataReq Counter32,
statDIUserDataAns Counter32,
statDIProfileUpdateReq Counter32,
statDIProfileUpdateAns Counter32,
statDISubscriberNotificationReq Counter32,
statDISubscriberNotificationAns Counter32,
statDIProfileNotificationReq Counter32,
statDIProfileNotificationAns Counter32,
statDIShErrorMsg Counter32
}
statDiameterComponentID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Diameter Component Identifier"
::= { statDiameterEntry 1 }
statDiameterDOW OBJECT-TYPE
SYNTAX DayOfWeek
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Day of week statistics was collected."
::= { statDiameterEntry 2 }
statDiameterTOD OBJECT-TYPE
SYNTAX TimeOfDay
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of day statistics was collected in XX minutes interval"
::= { statDiameterEntry 3 }
statDIRxDeviceWatchdogReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DWR msg coming in"
::= { statDiameterEntry 4 }
statDITxDeviceWatchdogReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DWR msg sending out "
::= { statDiameterEntry 5 }
statDIRxDeviceWatchdogAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DWA msg coming in "
::= { statDiameterEntry 6 }
statDITxDeviceWatchdogAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DWA msg sending out"
::= { statDiameterEntry 7 }
statDIRxCapabilityExchangeReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CER msg coming in"
::= { statDiameterEntry 8 }
statDITxCapabilityExchangeReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CER msg sending out"
::= { statDiameterEntry 9 }
statDIRxCapabilityExchangeAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CEA msg coming in"
::= { statDiameterEntry 10 }
statDITxCapabilityExchangeAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CEA msg sending out"
::= { statDiameterEntry 11 }
statDIRxDisconnectPeerReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DPR msg coming in "
::= { statDiameterEntry 12 }
statDITxDisconnectPeerReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DPR msg sending out "
::= { statDiameterEntry 13 }
statDIRxDisconnectPeerAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DPA msg coming in "
::= { statDiameterEntry 14 }
statDITxDisconnectPeerAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DPA msg sending out"
::= { statDiameterEntry 15 }
statDIRxSessionTerminationReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of STR msg coming in"
::= { statDiameterEntry 16 }
statDITxSessionTerminationReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of STR msg sending out"
::= { statDiameterEntry 17 }
statDIRxSessionTerminationAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of STA msg coming in"
::= { statDiameterEntry 18 }
statDITxSessionTerminationAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of STA msg sending out"
::= { statDiameterEntry 19 }
statDIRxAbortSessionReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ASR msg coming in"
::= { statDiameterEntry 20 }
statDITxAbortSessionReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ASR msg sending out"
::= { statDiameterEntry 21 }
statDIRxAbortSessionAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ASA msg coming in"
::= { statDiameterEntry 22 }
statDITxAbortSessionAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ASA msg sending out"
::= { statDiameterEntry 23 }
statDIUserDataReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of UDR msg sending out"
::= { statDiameterEntry 24 }
statDIUserDataAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of UDA msg coming in"
::= { statDiameterEntry 25 }
statDIProfileUpdateReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PUR msg sending out"
::= { statDiameterEntry 26 }
statDIProfileUpdateAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PUA msg coming in"
::= { statDiameterEntry 27 }
statDISubscriberNotificationReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SNR msg sending out"
::= { statDiameterEntry 28 }
statDISubscriberNotificationAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SNA msg coming in"
::= { statDiameterEntry 29 }
statDIProfileNotificationReq OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PNR msg sending out"
::= { statDiameterEntry 30 }
statDIProfileNotificationAns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PNA msg coming in"
::= { statDiameterEntry 31 }
statDIShErrorMsg OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Messages"
::= { statDiameterEntry 32 }
callAgentOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CallAgentOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Call Agent Access for Control/Status"
::= { callAgentStatusControl 1 }
callAgentOAMPEntry OBJECT-TYPE
SYNTAX CallAgentOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Call Agent access table"
INDEX { callAgentOAMPID }
::= { callAgentOAMPTable 1 }
CallAgentOAMPEntry ::= SEQUENCE {
callAgentOAMPID DisplayString1To64,
callAgentOAMPPrimaryState KAMState,
callAgentOAMPSecondaryState KAMState
}
callAgentOAMPID OBJECT-TYPE
SYNTAX DisplayString1To64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Call Agent ID"
::= { callAgentOAMPEntry 1 }
callAgentOAMPPrimaryState OBJECT-TYPE
SYNTAX KAMState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current State of Primary Call Agent"
::= { callAgentOAMPEntry 2 }
callAgentOAMPSecondaryState OBJECT-TYPE
SYNTAX KAMState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current State of Secondary Call Agent"
::= { callAgentOAMPEntry 3 }
featureServerOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF FeatureServerOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Feature Server Access for Control/Status"
::= { featureServer 3 }
featureServerOAMPEntry OBJECT-TYPE
SYNTAX FeatureServerOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Feature Server Access for Control/Status"
INDEX { featureServerOAMPID }
::= { featureServerOAMPTable 1 }
FeatureServerOAMPEntry ::= SEQUENCE {
featureServerOAMPID DisplayString1To64,
featureServerOAMPPrimaryState KAMState,
featureServerOAMPSecondaryState KAMState
}
featureServerOAMPID OBJECT-TYPE
SYNTAX DisplayString1To64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Feature Server ID"
::= { featureServerOAMPEntry 1 }
featureServerOAMPPrimaryState OBJECT-TYPE
SYNTAX KAMState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current State of Primary Feature Server"
::= { featureServerOAMPEntry 3 }
featureServerOAMPSecondaryState OBJECT-TYPE
SYNTAX KAMState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current State of Secondary Feature Server"
::= { featureServerOAMPEntry 4 }
mediaGatewayOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF MediaGatewayOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Media Gateway Access for Status/Control"
::= { callAgentStatusControl 2 }
mediaGatewayOAMPEntry OBJECT-TYPE
SYNTAX MediaGatewayOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Media Gateway Status/Control Access Table"
INDEX { mediaGatewayOAMPID }
::= { mediaGatewayOAMPTable 1 }
MediaGatewayOAMPEntry ::= SEQUENCE {
mediaGatewayOAMPID DisplayString1To32,
mediaGatewayOAMPAdminState ADMAdminState,
mediaGatewayOAMPOperState MGWOperState,
mediaGatewayOAMPTargetState ADMTargetState,
mediaGatewayOAMPMode ADMMode,
mediaGatewayControlState ControlState
}
mediaGatewayOAMPID OBJECT-TYPE
SYNTAX DisplayString1To32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media Gateway ID"
::= { mediaGatewayOAMPEntry 1 }
mediaGatewayOAMPAdminState OBJECT-TYPE
SYNTAX ADMAdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media Gateway Current State"
::= { mediaGatewayOAMPEntry 2 }
mediaGatewayOAMPOperState OBJECT-TYPE
SYNTAX MGWOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media Gateway Operational State"
::= { mediaGatewayOAMPEntry 3 }
mediaGatewayOAMPTargetState OBJECT-TYPE
SYNTAX ADMTargetState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Media Gateway Target State. 'not-set' if state is not set."
DEFVAL {1}
::= { mediaGatewayOAMPEntry 4 }
mediaGatewayOAMPMode OBJECT-TYPE
SYNTAX ADMMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Media Gateway Mode of control. 'not-set' if state is not set"
DEFVAL { 1 }
::= { mediaGatewayOAMPEntry 5 }
mediaGatewayControlState OBJECT-TYPE
SYNTAX ControlState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled; ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed. If not successful, then insufficient data is returned or general error is returned."
::= { mediaGatewayOAMPEntry 6 }
trunkGroupOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Trunk Group Access for OAMP"
::= { callAgentStatusControl 3 }
trunkGroupOAMPEntry OBJECT-TYPE
SYNTAX TrunkGroupOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Trunk Group Table Access"
INDEX { trunkGroupOAMPID, trunkGroupOAMPCallAgentID }
::= { trunkGroupOAMPTable 1 }
TrunkGroupOAMPEntry ::= SEQUENCE {
trunkGroupOAMPID Integer32,
trunkGroupOAMPCallAgentID DisplayString1To64,
trunkGroupOAMPAdminState ADMAdminState,
trunkGroupOAMPOperState TrunkGrpOperState,
trunkGroupOAMPTargetState ADMTargetState,
trunkGroupOAMPMode ADMMode,
trunkGroupOAMPControlState ControlState
}
trunkGroupOAMPID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk Group Number"
::= { trunkGroupOAMPEntry 1 }
trunkGroupOAMPCallAgentID OBJECT-TYPE
SYNTAX DisplayString1To64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Call Agent ID"
::= { trunkGroupOAMPEntry 2 }
trunkGroupOAMPAdminState OBJECT-TYPE
SYNTAX ADMAdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk Group Admin State"
::= { trunkGroupOAMPEntry 3 }
trunkGroupOAMPOperState OBJECT-TYPE
SYNTAX TrunkGrpOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk Operational State"
::= { trunkGroupOAMPEntry 4 }
trunkGroupOAMPTargetState OBJECT-TYPE
SYNTAX ADMTargetState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunk Target State. 'not-set' if state is not set."
DEFVAL {1}
::= { trunkGroupOAMPEntry 5 }
trunkGroupOAMPMode OBJECT-TYPE
SYNTAX ADMMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunk Target Mode of control. 'not-set' if state is not set."
DEFVAL { 1 }
::= { trunkGroupOAMPEntry 6 }
trunkGroupOAMPControlState OBJECT-TYPE
SYNTAX ControlState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled; ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed. If not successful, then insufficient data is returned or general error is returned."
::= { trunkGroupOAMPEntry 7 }
subscrLineTermOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubscrLineTermOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Subscriber Line Termination Access of OAMP"
::= { callAgentStatusControl 8 }
subscrLineTermOAMPEntry OBJECT-TYPE
SYNTAX SubscrLineTermOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Subscriber Line Termination Access Table"
INDEX { subscrLineTermOAMPID }
::= { subscrLineTermOAMPTable 1 }
SubscrLineTermOAMPEntry ::= SEQUENCE {
subscrLineTermOAMPID DisplayString,
subscrLineTermOAMPAdminState ADMAdminState,
subscrLineTermOAMPOperState TerminationOperState,
subscrLineTermOAMPTargetState ADMTargetState,
subscrLineTermOAMPMode ADMMode,
subscrLineTermOAMPControlState ControlState
}
subscrLineTermOAMPID OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1..30 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subscriber Line Termination ID"
::= { subscrLineTermOAMPEntry 1 }
subscrLineTermOAMPAdminState OBJECT-TYPE
SYNTAX ADMAdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subscriber Line Termination Current State"
::= { subscrLineTermOAMPEntry 2 }
subscrLineTermOAMPOperState OBJECT-TYPE
SYNTAX TerminationOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subscriber Line Termination Operational State"
::= { subscrLineTermOAMPEntry 3 }
subscrLineTermOAMPTargetState OBJECT-TYPE
SYNTAX ADMTargetState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subscriber Line Termination Target State. 'not-set' if state is not set."
DEFVAL { 1 }
::= { subscrLineTermOAMPEntry 4 }
subscrLineTermOAMPMode OBJECT-TYPE
SYNTAX ADMMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subscriber Line Termination Mode of control. 'not-set' if state is not set."
DEFVAL { 1 }
::= { subscrLineTermOAMPEntry 5 }
subscrLineTermOAMPControlState OBJECT-TYPE
SYNTAX ControlState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled; ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed. If not successful, then insufficient data is returned or general error is returned."
::= { subscrLineTermOAMPEntry 6 }
trunkTermOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkTermOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Trunk Termination Access for OAMP"
::= { callAgentStatusControl 9 }
trunkTermOAMPEntry OBJECT-TYPE
SYNTAX TrunkTermOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Trunk Termination Access Table"
INDEX { trunkTermOAMPTrunkGrpID, trunkTermOAMPCIC }
::= { trunkTermOAMPTable 1 }
TrunkTermOAMPEntry ::= SEQUENCE {
trunkTermOAMPTrunkGrpID Integer32,
trunkTermOAMPCIC INTEGER,
trunkTermOAMPAdminState ADMAdminState,
trunkTermOAMPOperState TerminationOperState,
trunkTermOAMPStaticState TrunkTermStaticState,
trunkTermOAMPDynamicState TrunkTermDynamicState,
trunkTermOAMPTargetState ADMTargetState,
trunkTermOAMPMode ADMMode,
trunkTermOAMPControlState ControlState
}
trunkTermOAMPTrunkGrpID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk Group ID"
::= { trunkTermOAMPEntry 1 }
trunkTermOAMPCIC OBJECT-TYPE
SYNTAX INTEGER ( 1..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk CIC"
::= { trunkTermOAMPEntry 2 }
trunkTermOAMPAdminState OBJECT-TYPE
SYNTAX ADMAdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk Termination Admin State"
::= { trunkTermOAMPEntry 3 }
trunkTermOAMPOperState OBJECT-TYPE
SYNTAX TerminationOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk Termination Operational State"
::= { trunkTermOAMPEntry 4 }
trunkTermOAMPStaticState OBJECT-TYPE
SYNTAX TrunkTermStaticState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk Termination Static State"
::= { trunkTermOAMPEntry 5 }
trunkTermOAMPDynamicState OBJECT-TYPE
SYNTAX TrunkTermDynamicState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trunk Termination Dynamic State"
::= { trunkTermOAMPEntry 6 }
trunkTermOAMPTargetState OBJECT-TYPE
SYNTAX ADMTargetState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunk Termination Target State. 'not-set' if state is not set."
DEFVAL { 1 }
::= { trunkTermOAMPEntry 7 }
trunkTermOAMPMode OBJECT-TYPE
SYNTAX ADMMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trunk Termination Mode of control. 'not-set' if state is not set."
DEFVAL { 1 }
::= { trunkTermOAMPEntry 8 }
trunkTermOAMPControlState OBJECT-TYPE
SYNTAX ControlState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled; ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed. If not successful, then insufficient data is returned or general error is returned."
::= { trunkTermOAMPEntry 9 }
aggrOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF AggrOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Aggr Access for Status/Control"
::= { callAgentStatusControl 10 }
aggrOAMPEntry OBJECT-TYPE
SYNTAX AggrOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Aggr Status/Control Access Table"
INDEX { aggrOAMPID }
::= { aggrOAMPTable 1 }
AggrOAMPEntry ::= SEQUENCE {
aggrOAMPID DisplayString1To32,
aggrOAMPOperState AGGROperState
}
aggrOAMPID OBJECT-TYPE
SYNTAX DisplayString1To32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AGGR ID"
::= { aggrOAMPEntry 1 }
aggrOAMPOperState OBJECT-TYPE
SYNTAX AGGROperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"AGGR Operational State"
::= { aggrOAMPEntry 2 }
mgwBulkStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF MgwBulkStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bulk Status Access for MGW Access"
::= { statusControlBulk 1 }
mgwBulkStatEntry OBJECT-TYPE
SYNTAX MgwBulkStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for MGW Bulk Status Table"
INDEX { mgwBulkStatPage }
::= { mgwBulkStatTable 1 }
MgwBulkStatEntry ::= SEQUENCE {
mgwBulkStatPage INTEGER,
mgwBulkStatVal OCTET STRING
}
mgwBulkStatPage OBJECT-TYPE
SYNTAX INTEGER ( 1..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Page Number or Row"
::= { mgwBulkStatEntry 1 }
mgwBulkStatVal OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE ( 0..65535 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delimited string of X number of MGWs.
The delimiters are:
';' = delimits each MGW.
'|' = delimits status fields.
The protocol of which is:
'MGW_ID|admin_state|oper_state;MGW_ID|admin_state...'
And example:
'MGW_ABC|1|3;MGW_XYZ|1|3...'
The enumerated states are the same as that of
mediaGatewayOAMPTable.
"
::= { mgwBulkStatEntry 2 }
trunkGroupBulkStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkGroupBulkStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bulk Status Access for Trunk Group Access"
::= { statusControlBulk 2 }
trunkGroupBulkStatEntry OBJECT-TYPE
SYNTAX TrunkGroupBulkStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Trunk Group Bulk Status Table"
INDEX { trunkGroupBulkStatPage }
::= { trunkGroupBulkStatTable 1 }
TrunkGroupBulkStatEntry ::= SEQUENCE {
trunkGroupBulkStatPage INTEGER,
trunkGroupBulkStatVal OCTET STRING
}
trunkGroupBulkStatPage OBJECT-TYPE
SYNTAX INTEGER ( 1..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Page Number or Row"
::= { trunkGroupBulkStatEntry 1 }
trunkGroupBulkStatVal OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE ( 0..65535 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delimited string of X number of Trunk Groups.
The delimiters are:
';' = delimits each Trunk Group.
'|' = delimits status fields.
The protocol of which is:
'TGN_ID|admin_state|oper_state;TGN_ID|admin_state...'
And example:
'232|1|3;233|1|3...'
The enumerated states are the same as that of
trunkGroupOAMPTable.
"
::= { trunkGroupBulkStatEntry 2 }
subscriberTermBulkStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubscriberTermBulkStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bulk Status Access for Subscriber Termination Access"
::= { statusControlBulk 3 }
subscriberTermBulkStatEntry OBJECT-TYPE
SYNTAX SubscriberTermBulkStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Subscriber Termination Bulk Status Table"
INDEX { subscriberTermBulkStatPage }
::= { subscriberTermBulkStatTable 1 }
SubscriberTermBulkStatEntry ::= SEQUENCE {
subscriberTermBulkStatPage INTEGER,
subscriberTermBulkStatVal OCTET STRING
}
subscriberTermBulkStatPage OBJECT-TYPE
SYNTAX INTEGER ( 1..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Page Number or Row"
::= { subscriberTermBulkStatEntry 1 }
subscriberTermBulkStatVal OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE ( 0..65535 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delimited string of X number of Subscriber Terminations.
The delimiters are:
';' = delimits each Subscriber Termination.
'|' = delimits status fields.
The protocol of which is:
'SUB_ID|admin_state|oper_state;SUB_ID|admin_state...'
And example:
'SUB_ABC|1|3;SUB_XYZ|1|3...'
The enumerated states are the same as that of
subscrLineTermOAMPTable.
"
::= { subscriberTermBulkStatEntry 2 }
trunkTermBulkStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkTermBulkStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Bulk Status Access for Trunk Termination Access"
::= { statusControlBulk 4 }
trunkTermBulkStatEntry OBJECT-TYPE
SYNTAX TrunkTermBulkStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Trunk Termination Bulk Status Table"
INDEX { trunkTermBulkStatPage }
::= { trunkTermBulkStatTable 1 }
TrunkTermBulkStatEntry ::= SEQUENCE {
trunkTermBulkStatPage INTEGER,
trunkTermBulkStatVal OCTET STRING
}
trunkTermBulkStatPage OBJECT-TYPE
SYNTAX INTEGER ( 1..65535 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Page Number or Row"
::= { trunkTermBulkStatEntry 1 }
trunkTermBulkStatVal OBJECT-TYPE
SYNTAX OCTET STRING ( SIZE ( 0..65535 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Delimited string of X number of Trunk Terminations.
The delimiters are:
';' = delimits each Trunk Termination.
'|' = delimits status fields.
'.' = delimits CIC and TGN_ID.
The protocol of which is:
'TGN_ID.CIC|admin_state|oper_state|static_state|dynamic_state;CIC.TGN_ID|admin_state...'
And example:
'232.22|1|3|1|1;233.22|1|3|1|1...'
The enumerated states are the same as that of
trunkTermOAMPTable.
"
::= { trunkTermBulkStatEntry 2 }
optiMediaGatewayOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF OptiMediaGatewayOAMPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Optimized Media Gateway Access for Status/Control"
::= { callAgentOptimized 1 }
optiMediaGatewayOAMPEntry OBJECT-TYPE
SYNTAX OptiMediaGatewayOAMPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row description for Optimized Media Gateway Status/Control Access Table"
INDEX { optiMediaGatewayOAMPID }
::= { optiMediaGatewayOAMPTable 1 }
OptiMediaGatewayOAMPEntry ::= SEQUENCE {
optiMediaGatewayOAMPID DisplayString1To32,
optiMediaGatewayOAMPAdminState ADMAdminState,
optiMediaGatewayOAMPOperState OptiMGWOperState,
optiMediaGatewayOAMPTargetState ADMTargetState,
optiMediaGatewayOAMPMode ADMMode,
optiMediaGatewayControlState ControlState
}
optiMediaGatewayOAMPID OBJECT-TYPE
SYNTAX DisplayString1To32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Media Gateway ID"
::= { optiMediaGatewayOAMPEntry 1 }
optiMediaGatewayOAMPAdminState OBJECT-TYPE
SYNTAX ADMAdminState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Media Gateway obsolete State"
::= { optiMediaGatewayOAMPEntry 2 }
optiMediaGatewayOAMPOperState OBJECT-TYPE
SYNTAX OptiMGWOperState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Media Gateway Operational State"
::= { optiMediaGatewayOAMPEntry 3 }
optiMediaGatewayOAMPTargetState OBJECT-TYPE
SYNTAX ADMTargetState
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Media Gateway Target State. 'not-set' if state is not set."
DEFVAL {1}
::= { optiMediaGatewayOAMPEntry 4 }
optiMediaGatewayOAMPMode OBJECT-TYPE
SYNTAX ADMMode
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Media Gateway Mode of control. 'not-set' if state is not set"
DEFVAL { 1 }
::= { optiMediaGatewayOAMPEntry 5 }
optiMediaGatewayControlState OBJECT-TYPE
SYNTAX ControlState
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"If the manager does a get, the 2 possible state will be return:
insufficient-data is returned if target state column and/or mode of control col
umn is not filled; ready-to-commit is return if both target-state and mode of c
ontrol columns are filled.
The manager can perform a set only with the commit state and the value that is i
mmediately returned if successfull is committed. If not successful, then insuff
icient data is returned or general error is returned."
::= { optiMediaGatewayOAMPEntry 6 }
optiSubscrLineTermOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF OptiSubscrLineTermOAMPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Optimized Subscriber Line Termination Access of OAMP"
::= { callAgentOptimized 2 }
optiSubscrLineTermOAMPEntry OBJECT-TYPE
SYNTAX OptiSubscrLineTermOAMPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row description for Optimized Subscriber Line Termination Access Table"
INDEX { optiSubscrLineTermOAMPID }
::= { optiSubscrLineTermOAMPTable 1 }
OptiSubscrLineTermOAMPEntry ::= SEQUENCE {
optiSubscrLineTermOAMPID DisplayString,
optiSubscrLineTermOAMPAdminState ADMAdminState,
optiSubscrLineTermOAMPOperState OptiTerminationOperState,
optiSubscrLineTermOAMPTargetState ADMTargetState,
optiSubscrLineTermOAMPMode ADMMode,
optiSubscrLineTermOAMPControlState ControlState
}
optiSubscrLineTermOAMPID OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 1..30 ) )
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Subscriber Line Termination ID"
::= { optiSubscrLineTermOAMPEntry 1 }
optiSubscrLineTermOAMPAdminState OBJECT-TYPE
SYNTAX ADMAdminState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Subscriber Line Termination obsolete State"
::= { optiSubscrLineTermOAMPEntry 2 }
optiSubscrLineTermOAMPOperState OBJECT-TYPE
SYNTAX OptiTerminationOperState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Subscriber Line Termination Operational State"
::= { optiSubscrLineTermOAMPEntry 3 }
optiSubscrLineTermOAMPTargetState OBJECT-TYPE
SYNTAX ADMTargetState
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Subscriber Line Termination Target State. 'not-set' if state i
s not set."
DEFVAL { 1 }
::= { optiSubscrLineTermOAMPEntry 4 }
optiSubscrLineTermOAMPMode OBJECT-TYPE
SYNTAX ADMMode
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Subscriber Line Termination Mode of control. 'not-set' if stat
e is not set."
DEFVAL { 1 }
::= { optiSubscrLineTermOAMPEntry 5 }
optiSubscrLineTermOAMPControlState OBJECT-TYPE
SYNTAX ControlState
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"If the manager does a get, the 2 possible state will be return:
insufficient-data is returned if target state column and/or mode of control col
umn is not filled; ready-to-commit is return if both target-state and mode of c
ontrol columns are filled.
The manager can perform a set only with the commit state and the value that is i
mmediately returned if successfull is committed. If not successful, then insuff
icient data is returned or general error is returned."
::= { optiSubscrLineTermOAMPEntry 6 }
optiTrunkGroupOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF OptiTrunkGroupOAMPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Optimized Trunk Group Access for OAMP"
::= { callAgentOptimized 3 }
optiTrunkGroupOAMPEntry OBJECT-TYPE
SYNTAX OptiTrunkGroupOAMPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row description for Optimized Trunk Group Table Access"
INDEX { optiTrunkGroupOAMPID, optiTrunkGroupOAMPCallAgentID }
::= { optiTrunkGroupOAMPTable 1 }
OptiTrunkGroupOAMPEntry ::= SEQUENCE {
optiTrunkGroupOAMPID Integer32,
optiTrunkGroupOAMPCallAgentID DisplayString1To64,
optiTrunkGroupOAMPAdminState ADMAdminState,
optiTrunkGroupOAMPOperState OptiTrunkGrpOperState,
optiTrunkGroupOAMPTargetState ADMTargetState,
optiTrunkGroupOAMPMode ADMMode,
optiTrunkGroupOAMPControlState ControlState
}
optiTrunkGroupOAMPID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trunk Group Number"
::= { optiTrunkGroupOAMPEntry 1 }
optiTrunkGroupOAMPCallAgentID OBJECT-TYPE
SYNTAX DisplayString1To64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Call Agent ID"
::= { optiTrunkGroupOAMPEntry 2 }
optiTrunkGroupOAMPAdminState OBJECT-TYPE
SYNTAX ADMAdminState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trunk Group Admin State"
::= { optiTrunkGroupOAMPEntry 3 }
optiTrunkGroupOAMPOperState OBJECT-TYPE
SYNTAX OptiTrunkGrpOperState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trunk Operational State"
::= { optiTrunkGroupOAMPEntry 4 }
optiTrunkGroupOAMPTargetState OBJECT-TYPE
SYNTAX ADMTargetState
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Trunk Target State. 'not-set' if state is not set."
DEFVAL {1}
::= { optiTrunkGroupOAMPEntry 5 }
optiTrunkGroupOAMPMode OBJECT-TYPE
SYNTAX ADMMode
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Trunk Target Mode of control. 'not-set' if state is not set."
DEFVAL { 1 }
::= { optiTrunkGroupOAMPEntry 6 }
optiTrunkGroupOAMPControlState OBJECT-TYPE
SYNTAX ControlState
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"If the manager does a get, the 2 possible state will be return:
insufficient-data is returned if target state column and/or mode of control col
umn is not filled; ready-to-commit is return if both target-state and mode of c
ontrol columns are filled.
The manager can perform a set only with the commit state and the value that is i
mmediately returned if successfull is committed. If not successful, then insuff
icient data is returned or general error is returned."
::= { optiTrunkGroupOAMPEntry 7 }
optiTrunkTermOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF OptiTrunkTermOAMPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Optimized Trunk Termination Access for OAMP"
::= { callAgentOptimized 4 }
optiTrunkTermOAMPEntry OBJECT-TYPE
SYNTAX OptiTrunkTermOAMPEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Row description for Optimized Trunk Termination Access Table"
INDEX { optiTrunkTermOAMPTrunkGrpID, optiTrunkTermOAMPCIC }
::= { optiTrunkTermOAMPTable 1 }
OptiTrunkTermOAMPEntry ::= SEQUENCE {
optiTrunkTermOAMPTrunkGrpID Integer32,
optiTrunkTermOAMPCIC INTEGER,
optiTrunkTermOAMPAdminState ADMAdminState,
optiTrunkTermOAMPOperState OptiTerminationOperState,
optiTrunkTermOAMPTargetState ADMTargetState,
optiTrunkTermOAMPMode ADMMode,
optiTrunkTermOAMPControlState ControlState
}
optiTrunkTermOAMPTrunkGrpID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trunk Group ID"
::= { optiTrunkTermOAMPEntry 1 }
optiTrunkTermOAMPCIC OBJECT-TYPE
SYNTAX INTEGER ( 1..65535 )
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trunk CIC"
::= { optiTrunkTermOAMPEntry 2 }
optiTrunkTermOAMPAdminState OBJECT-TYPE
SYNTAX ADMAdminState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trunk Termination Admin State"
::= { optiTrunkTermOAMPEntry 3 }
optiTrunkTermOAMPOperState OBJECT-TYPE
SYNTAX OptiTerminationOperState
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trunk Termination Operational State"
::= { optiTrunkTermOAMPEntry 4 }
optiTrunkTermOAMPTargetState OBJECT-TYPE
SYNTAX ADMTargetState
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Trunk Termination Target State. 'not-set' if state is not set.
"
DEFVAL { 1 }
::= { optiTrunkTermOAMPEntry 5 }
optiTrunkTermOAMPMode OBJECT-TYPE
SYNTAX ADMMode
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Trunk Termination Mode of control. 'not-set' if state is not s
et."
DEFVAL { 1 }
::= { optiTrunkTermOAMPEntry 6 }
optiTrunkTermOAMPControlState OBJECT-TYPE
SYNTAX ControlState
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"If the manager does a get, the 2 possible state will be return:
insufficient-data is returned if target state column and/or mode of control col
umn is not filled; ready-to-commit is return if both target-state and mode of c
ontrol columns are filled.
The manager can perform a set only with the commit state and the value that is i
mmediately returned if successfull is committed. If not successful, then insuff
icient data is returned or general error is returned."
::= { optiTrunkTermOAMPEntry 7 }
elementManagerOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF ElementManagerOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Element Manager Access for Control/Status"
::= { emsStatusControl 1 }
elementManagerOAMPEntry OBJECT-TYPE
SYNTAX ElementManagerOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for Element Manager access table"
INDEX { elementManagerOAMPID }
::= { elementManagerOAMPTable 1 }
ElementManagerOAMPEntry ::= SEQUENCE {
elementManagerOAMPID DisplayString1To64,
elementManagerOAMPPrimaryState KAMState,
elementManagerOAMPSecondaryState KAMState
}
elementManagerOAMPID OBJECT-TYPE
SYNTAX DisplayString1To64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Call Agent ID"
::= { elementManagerOAMPEntry 1 }
elementManagerOAMPPrimaryState OBJECT-TYPE
SYNTAX KAMState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current State of Primary Call Agent"
::= { elementManagerOAMPEntry 2 }
elementManagerOAMPSecondaryState OBJECT-TYPE
SYNTAX KAMState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current State of Secondary Call Agent"
::= { elementManagerOAMPEntry 3 }
bdmsOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF BdmsOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Billing Database Management Server BDMS Access for Control/Status"
::= { emsStatusControl 2 }
bdmsOAMPEntry OBJECT-TYPE
SYNTAX BdmsOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for BDMS access table"
INDEX { bdmsOAMPID }
::= { bdmsOAMPTable 1 }
BdmsOAMPEntry ::= SEQUENCE {
bdmsOAMPID DisplayString1To64,
bdmsOAMPPrimaryState KAMState,
bdmsOAMPSecondaryState KAMState
}
bdmsOAMPID OBJECT-TYPE
SYNTAX DisplayString1To64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Call Agent ID"
::= { bdmsOAMPEntry 1 }
bdmsOAMPPrimaryState OBJECT-TYPE
SYNTAX KAMState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Current State of Primary Call Agent"
::= { bdmsOAMPEntry 2 }
bdmsOAMPSecondaryState OBJECT-TYPE
SYNTAX KAMState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current State of Secondary Call Agent"
::= { bdmsOAMPEntry 3 }
sgpOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SgpOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SGP Access for Status/Control"
::= { signalingAdapterStatusControl 1 }
sgpOAMPEntry OBJECT-TYPE
SYNTAX SgpOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for SGP Status/Control Access Table"
INDEX { sgpOAMPID, sgpOAMPPlatformID }
::= { sgpOAMPTable 1 }
SgpOAMPEntry ::= SEQUENCE {
sgpOAMPID DisplayString1To32,
sgpOAMPPlatformID DisplayString1To32,
sgpOAMPOperState SGPOperState
}
sgpOAMPID OBJECT-TYPE
SYNTAX DisplayString1To32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SGP ID"
::= { sgpOAMPEntry 1 }
sgpOAMPPlatformID OBJECT-TYPE
SYNTAX DisplayString1To32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SGP Platform ID"
::= { sgpOAMPEntry 2 }
sgpOAMPOperState OBJECT-TYPE
SYNTAX SGPOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SGP Operational State
1: SGP not in use.
2: SGP in service.
3: SGP out of service, SCTP association down.
4: SGP out of service, M3UA/SUA down.
5: unkown SGP status.
6: Operation not supported.
-1: ERROR,State not recognized."
::= { sgpOAMPEntry 3 }
dpcOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF DpcOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DPC Access for Status/Control"
::= { signalingAdapterStatusControl 2 }
dpcOAMPEntry OBJECT-TYPE
SYNTAX DpcOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for DPC Status/Control Access Table"
INDEX { dpcOAMPID, dpcOAMPPlatformID }
::= { dpcOAMPTable 1 }
DpcOAMPEntry ::= SEQUENCE {
dpcOAMPID DisplayString1To32,
dpcOAMPPlatformID DisplayString1To32,
dpcOAMPOperState DPCOperState
}
dpcOAMPID OBJECT-TYPE
SYNTAX DisplayString1To32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DPC ID"
::= { dpcOAMPEntry 1 }
dpcOAMPPlatformID OBJECT-TYPE
SYNTAX DisplayString1To32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DPC Platform ID"
::= { dpcOAMPEntry 2 }
dpcOAMPOperState OBJECT-TYPE
SYNTAX DPCOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DPC Operational State"
::= { dpcOAMPEntry 3 }
sctpAssOAMPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SctpAssOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SCTP Associated Access for Status/Control"
::= { signalingAdapterStatusControl 3 }
sctpAssOAMPEntry OBJECT-TYPE
SYNTAX SctpAssOAMPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Row description for SCTP Associated Status/Control Access Table"
INDEX { sctpAssOAMPID }
::= { sctpAssOAMPTable 1 }
SctpAssOAMPEntry ::= SEQUENCE {
sctpAssOAMPID DisplayString1To32,
sctpAssOAMPAdminState ADMAdminState,
sctpAssOAMPOperState SCTPAssOperState,
sctpAssOAMPTargetState SCTPAssTargetState,
sctpAssOAMPMode ADMMode,
sctpAssControlState ControlState
}
sctpAssOAMPID OBJECT-TYPE
SYNTAX DisplayString1To32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCTP Associated ID"
::= { sctpAssOAMPEntry 1 }
sctpAssOAMPAdminState OBJECT-TYPE
SYNTAX ADMAdminState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCTP Associated Current State"
::= { sctpAssOAMPEntry 2 }
sctpAssOAMPOperState OBJECT-TYPE
SYNTAX SCTPAssOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SCTP Associated Operational State"
::= { sctpAssOAMPEntry 3 }
sctpAssOAMPTargetState OBJECT-TYPE
SYNTAX SCTPAssTargetState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SCTP Associated Target State. 'not-set' if state is not set."
DEFVAL {1}
::= { sctpAssOAMPEntry 4 }
sctpAssOAMPMode OBJECT-TYPE
SYNTAX ADMMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SCTP Associated Mode of control. 'not-set' if state is not set"
DEFVAL { 1 }
::= { sctpAssOAMPEntry 5 }
sctpAssControlState OBJECT-TYPE
SYNTAX ControlState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If the manager does a get, the 2 possible state will be return: insufficient-data is returned if target state column and/or mode of control column is not filled; ready-to-commit is return if both target-state and mode of control columns are filled.
The manager can perform a set only with the commit state and the value that is immediately returned if successfull is committed. If not successful, then insufficient data is returned or general error is returned."
::= { sctpAssOAMPEntry 6 }
--
-- Start of Current Trap Definitions
--
startOrStopOfSS7CICAudit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Start or Stop of SS7-CIC audit.
SS7 CIC audit has started or stopped.
Report Type: audit, Report Num: 2,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
type of audit = value."
REFERENCE ""
::= { auditTraps 2 }
ss7CICAuditTerminatedBeforeSuccessfulCompletion NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SS7 CIC audit terminated before successful completion.
A higher priority SS7 CIC audit interrupted and terminated a lower priority SS7 CIC audit.
Report Type: audit, Report Num: 3,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
type of audit = value."
REFERENCE ""
::= { auditTraps 3 }
callExceedsALongDurationThreshold NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call exceeds a long-duration threshold.
Call exceeds current system long-duration threshold.
Report Type: audit, Report Num: 4,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk group number = value; Trunk member number = value;
Current long-duration threshold = value."
REFERENCE ""
::= { auditTraps 4 }
criticalInternalAuditFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Critical Internal Audit Failure.
See Data Field
Report Type: audit, Report Num: 5,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { auditTraps 5 }
majorInternalAuditFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Major Internal Audit Failure.
See Data Field
Report Type: audit, Report Num: 6,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { auditTraps 6 }
minorInternalAuditFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Minor Internal Audit Failure.
See Data Field
Report Type: audit, Report Num: 7,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { auditTraps 7 }
warningFromInternalAudit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Warning From Internal Audit.
See Data Field
Report Type: audit, Report Num: 8,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { auditTraps 8 }
callDataAuditComplete NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call Data Audit Complete.
A memory audit has completed
Report Type: audit, Report Num: 10,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Audit Information = value."
REFERENCE ""
::= { auditTraps 10 }
criticalNTPServiceFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Critical NTP Service Failure.
See Data Field.
Report Type: audit, Report Num: 11,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { auditTraps 11 }
majorNTPServiceFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Major NTP Service Failure.
See Data Field.
Report Type: audit, Report Num: 12,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { auditTraps 12 }
minorNTPServiceFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Minor NTP Service Failure.
See Data Field.
Report Type: audit, Report Num: 13,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { auditTraps 13 }
ntpServiceWarning NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "NTP Service Warning.
See Data Field.
Report Type: audit, Report Num: 14,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { auditTraps 14 }
criticalIDXSharedMemoryError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Critical IDX Shared Memory Error.
See Data Field.
Report Type: audit, Report Num: 15,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { auditTraps 15 }
processHeapMemoryUsageExceedsMinorThresholdLevel NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Process Heap memory usage exceeds minor threshold level.
Increase in heap usage due to high call traffic or maintenance operation.
Report Type: audit, Report Num: 16,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Heap size in KB = value;
Heap Limit in KB = value; Heap usage percentage = value;
Threshold level percentge = value."
REFERENCE ""
::= { auditTraps 16 }
processHeapMemoryUsageExceedsMajorThresholdLevel NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Process Heap memory usage exceeds major threshold level.
Increase in heap usage due to high call traffic or maintenance operation.
Report Type: audit, Report Num: 17,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Heap size in KB = value;
Heap Limit in KB = value; Heap usage percentage = value;
Threshold level percentge = value."
REFERENCE ""
::= { auditTraps 17 }
processHeapMemoryUsageExceedsCriticalThresholdLevel NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Process Heap memory usage exceeds critical threshold level.
Increase in heap usage due to high call traffic or maintenance operation.
Report Type: audit, Report Num: 18,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Heap size in KB = value;
Heap Limit in KB = value; Heap usage percentage = value;
Threshold level percentge = value."
REFERENCE ""
::= { auditTraps 18 }
recoveredMemoryOfStaleCall NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Recovered Memory of stale call.
Loss of communication with originating or terminating side.
Adjacent network device protocol error.
Internal Software Error.
Report Type: audit, Report Num: 19,
Severity: warning, Threshhold: 20, Throttle: 0;
The details contain syntax in the form:
Stale Memory Release Info = value."
REFERENCE ""
::= { auditTraps 19 }
auditFoundLostCallDataRecord NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Audit Found lost call data record.
Software error - however, the orphaned records are recovered on detection 2d.
Report Type: audit, Report Num: 20,
Severity: major, Threshhold: 20, Throttle: 0;
The details contain syntax in the form:
Error Text = value."
REFERENCE ""
::= { auditTraps 20 }
qosGateMemoryAuditComplete NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "QoS Gate Memory Audit Complete.
Report Type: audit, Report Num: 21,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { auditTraps 21 }
qosGateStatusAuditComplete NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "QoS Gate Status Audit Complete.
Report Type: audit, Report Num: 22,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { auditTraps 22 }
recoverMemoryOfDanglingGate NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Recover Memory of Dangling Gate.
Report Type: audit, Report Num: 23,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { auditTraps 23 }
noGateInCMTSForActiveConnection NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "No Gate in CMTS for Active Connection.
Report Type: audit, Report Num: 24,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { auditTraps 24 }
coreFilePresent NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Core File Present.
Report Type: audit, Report Num: 25,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { auditTraps 25 }
registrationMonitorRecovery NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Registration monitor recovery.
Report Type: audit, Report Num: 26,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { auditTraps 26 }
billingPartitionDiskUsageMinorThresholdExceeded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Billing Partition Disk Usage Minor Threshold Exceeded.
Call detail records are accumulating on the disk associated with the billing database in the EMS. This is because data is being written into the database faster than it is being read out of the database. The minor threshold (default value=70%) has been exceeded.
NOTE: Some fluctuation in disk usage is to be expected as call volume rises and falls during the day. Threshold crossings might step upward (from MINOR to MAJOR to CRITICAL) when there is a rapid increase in call volume, and then step downward (CRITICAL to MAJOR to MINOR) when call volume slows.
Report Type: billing, Report Num: 2,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Disk Usage Percentag = value."
REFERENCE ""
::= { billingTraps 2 }
billingPartitionDiskUsageMajorThresholdExceeded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Billing Partition Disk Usage Major Threshold Exceeded.
Call detail records are accumulating on the disk associated with the billing database in the EMS. This is because data is being written into the database faster than it is being read out of the database. The major threshold (default value=80%) has been exceeded.
NOTE: Some fluctuation in disk usage is to be expected as call volume rises and falls during the day. Threshold crossings might step upward (from MINOR to MAJOR to CRITICAL) when there is a rapid increase in call volume, and then step downward (CRITICAL to MAJOR to MINOR) when call volume slows.
Report Type: billing, Report Num: 3,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Disk Usage Percentag = value."
REFERENCE ""
::= { billingTraps 3 }
billingPartitionDiskUsageCriticalThresholdExceeded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Billing Partition Disk Usage Critical Threshold Exceeded.
Call detail records are accumulating on the disk associated with the billing database in the EMS. This is because data is being written into the database faster than it is being read out of the database. The major threshold (default value=90%) has been exceeded.
NOTE: Some fluctuation in disk usage is to be expected as call volume rises and falls during the day. Threshold crossings might step upward (from MINOR to MAJOR to CRITICAL) when there is a rapid increase in call volume, and then step downward (CRITICAL to MAJOR to MINOR) when call volume slows.
Report Type: billing, Report Num: 4,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Disk Usage Percentag = value."
REFERENCE ""
::= { billingTraps 4 }
billingPartitionDiskUsageWithinNormalRange NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Billing Partition Disk Usage Within Normal Range.
Report Type: billing, Report Num: 5,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Disk Usage Percentag = value."
REFERENCE ""
::= { billingTraps 5 }
failedToMakeFtpTransfer NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "FTP/SFTP transfer failed.
Unable to connect to remote host.
Unable to login to remote host.
File transfer error.
Report Type: billing, Report Num: 6,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
TransferType = value; FileName = value;
RemoteAddress = value; Error = value."
REFERENCE ""
::= { billingTraps 6 }
tcpConnectionError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "TCP Connection Error.
System call error.
Not connected to the right address.
Report Type: billing, Report Num: 7,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value."
REFERENCE ""
::= { billingTraps 7 }
tcpPacketReceiveFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "TCP Packet Receive Failure.
Peer went down; Socket closed.
Report Type: billing, Report Num: 8,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Host Name = value."
REFERENCE ""
::= { billingTraps 8 }
duplicateEventMessageReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Duplicate Event Message Received.
The Basic Call Model (BCM) supplied a duplicate message for the same call. The message is redundant.
Report Type: billing, Report Num: 9,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Event Message Type = value."
REFERENCE ""
::= { billingTraps 9 }
databaseLockError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Database Lock Error.
SQL server went down.
Connection has been corrupted.
Report Type: billing, Report Num: 10,
Severity: warning, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 10 }
databaseUnlockError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Database Unlock Error.
Database connection lost.
The tables are locked by another thread, and the current thread has timed out waiting for the lock to be released.
Report Type: billing, Report Num: 11,
Severity: warning, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 11 }
tablePointerReadError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Table Pointer Read Error.
Database connection lost.
The tables might be locked by another thread, and the current thread has timed out waiting for the lock to be released.
Report Type: billing, Report Num: 12,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Table Name = value."
REFERENCE ""
::= { billingTraps 12 }
databaseConnectionError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Database Connection Error.
SQL server is down.
Report Type: billing, Report Num: 13,
Severity: critical, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 13 }
fileOpenError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "File Open Error.
System error, may be out of file descriptors.
Report Type: billing, Report Num: 14,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Path Name = value."
REFERENCE ""
::= { billingTraps 14 }
fileWriteError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "File Write Error.
System error, may be out of file descriptors.
Report Type: billing, Report Num: 15,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Path Name = value."
REFERENCE ""
::= { billingTraps 15 }
timePointCalculationError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Time Point Calculation Error.
Either the time points are 0 or call disconnection is less than connect time.
Report Type: billing, Report Num: 16,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Start Time = value; End Time = value."
REFERENCE ""
::= { billingTraps 16 }
sharedMemoryAddFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Shared Memory Add Failure.
Out of allocated shared memory space.
Report Type: billing, Report Num: 17,
Severity: minor, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 17 }
errorCallingMKTIMEFunction NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Error Calling MKTIME Function.
System call error.
Report Type: billing, Report Num: 18,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Seconds = value; Minutes = value;
Hour = value; Day = value;
Month = value; Year = value."
REFERENCE ""
::= { billingTraps 18 }
callDetailBlockDatabaseWriteError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Call Detail Block Database Write Error.
SQL server is down.
Query is wrong; software error
Report Type: billing, Report Num: 19,
Severity: minor, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 19 }
callDetailBlockDatabaseReadError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Call Detail Block Database Read Error.
SQL server is down.
Query is wrong; software error.
Report Type: billing, Report Num: 20,
Severity: minor, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 20 }
unknownBillingEventMessageReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Unknown Billing Event Message Received.
Unrecognized message recalled from Basic Call Model (BCM).
Report Type: billing, Report Num: 21,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Message Type = value."
REFERENCE ""
::= { billingTraps 21 }
errorReleasingStagingAreaInSharedMemory NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Error releasing staging area in shared memory.
Trying to release nonexistent record; software error.
Report Type: billing, Report Num: 22,
Severity: info, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 22 }
errorReleasingBusyListEntryInSharedMemory NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Error releasing busy list entry in shared memory.
Trying to release nonexistent record; software error.
Report Type: billing, Report Num: 23,
Severity: info, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 23 }
updateTablePointerError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Update Table Pointer Error.
SQL server is down.
Wrong query supplied.
Report Type: billing, Report Num: 24,
Severity: warning, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 24 }
sharedMemoryUpdateFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Shared Memory update failed.
The Shared Memory is full (maybe because EMS is down).
Call Volume is very high. ( more than 200 calls per sec).
Report Type: billing, Report Num: 26,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Reason = value; EntryNumber = value."
REFERENCE ""
::= { billingTraps 26 }
sharedMemoryEntryRemoveFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Shared Memory entry remove failed.
Software Error, (maybe because the entry is not in shared memory).
Report Type: billing, Report Num: 27,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
EntryNumber = value."
REFERENCE ""
::= { billingTraps 27 }
wrongPortNumberSpecified NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Wrong port number specified.
Wrong Port Number specified in platform.cfg file
Report Type: billing, Report Num: 28,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
PortNumber = value."
REFERENCE ""
::= { billingTraps 28 }
cdbSendFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CDB Send failed.
TCP Send call failure
Both the EMSs down
Report Type: billing, Report Num: 29,
Severity: major, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 29 }
domainNameMappingFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Domain name mapping failed.
Wrong DNS Name mapping specified in the cfg files
Report Type: billing, Report Num: 30,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Address = value."
REFERENCE ""
::= { billingTraps 30 }
portNotSpecified NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Port not specified.
Port not specified in platform.cfg
Report Type: billing, Report Num: 31,
Severity: major, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 31 }
emsAddressNotSpecified NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS address not specified.
Either the primary or secondary EMS address has not been specified in the platform.cfg
Report Type: billing, Report Num: 32,
Severity: major, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 32 }
billingFTPParametersInvalid NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "FTP/SFTP parameters invalid.
The billing-acct-addr table is not fully provisioned with the information needed to perform file transfers.
Report Type: billing, Report Num: 33,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
TransferType = value; BillingServerDir = value;
BillingServerAddr = value; User name = value."
REFERENCE ""
::= { billingTraps 33 }
allBillingLinksAtCADown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "All Billing Links at CA down.
Cable has been pulled
ifconfig down has been performed on the interfaces
Report Type: billing, Report Num: 34,
Severity: critical, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 34 }
allBillingLinksAtBillingServerDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "All Billing Links at Billing Server down.
cable connection might have been pulled out.
'ifconfig down' might have been done on the interfaces
Report Type: billing, Report Num: 35,
Severity: critical, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 35 }
billingLinkRestored NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Billing Link Restored.
cable has been restored
Report Type: billing, Report Num: 36,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface Name = value."
REFERENCE ""
::= { billingTraps 36 }
billingLinkFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Billing link failure.
Cable may have been pulled
'ifconfig down' may have been performed on the interface
Report Type: billing, Report Num: 37,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface name = value."
REFERENCE ""
::= { billingTraps 37 }
emLogFileAccessError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EM log file access error.
System error-may be out of file descriptiors.
Disk may be faulty.
Report Type: billing, Report Num: 38,
Severity: major, Threshhold: 50, Throttle: 0;
The details contain syntax in the form:
Type of access error = value; Reason for error = value;
Sequence number of f = value; Index of event messa = value;
Location tag = value."
REFERENCE ""
::= { billingTraps 38 }
radiusAccountingReceiveFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "RADIUS Accounting receive failure.
System error.
Report Type: billing, Report Num: 39,
Severity: minor, Threshhold: 25, Throttle: 0;
The details contain syntax in the form:
Location tag = value."
REFERENCE ""
::= { billingTraps 39 }
emEncodeFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EM encode failure.
There is a problem with the format of the data to be sent to the RKS.
Report Type: billing, Report Num: 40,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Location tag = value."
REFERENCE ""
::= { billingTraps 40 }
messageContentError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Message content error.
There is a mismatch between what the sender populated in the message and what the receiver expects.
Report Type: billing, Report Num: 41,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Message type = value; Field name = value;
Field value (text) = value; Field value (numeric = value;
Location tag = value."
REFERENCE ""
::= { billingTraps 41 }
errorReadingProvisionedDataUsingDefault NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Error reading provisioned data-using default.
Application was unable to read provisioned data, and had to resort to using default values.
Report Type: billing, Report Num: 42,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Error code = value; Table name = value;
Field name = value; Default value (decim = value;
Default value (text) = value; Location tag = value."
REFERENCE ""
::= { billingTraps 42 }
invalidBillingConfigurationProgramExiting NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Invalid billing configuration-program exiting.
The Call Agent is provisioned to have both
CDB billing and EM billing enabled,
or is provisioned to have no billing enabled.
Report Type: billing, Report Num: 43,
Severity: major, Threshhold: 50, Throttle: 0;
The details contain syntax in the form:
Field name = value; Table name = value;
Location tag = value."
REFERENCE ""
::= { billingTraps 43 }
rksSwitchOccurred NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "RKS switch occurred.
Billing changed the destination RKS for transmitting Event Messages. The change could have been triggered by a communication problem with an RKS, or by an attempt to reestablish RKS communication.
Report Type: billing, Report Num: 44,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Type of RKS switch = value; Location tag = value."
REFERENCE ""
::= { billingTraps 44 }
eventMessageLogFileOpened NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Event Message log file opened.
A log file has been created for the storage of Event Messages that cannot be transmitted to an RKS.
Report Type: billing, Report Num: 45,
Severity: minor, Threshhold: 50, Throttle: 0;
The details contain syntax in the form:
Element type = value; File name = value;
Location tag = value."
REFERENCE ""
::= { billingTraps 45 }
eventMessageLogFileClosed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Event Message log file closed.
An open Event Message log file has been closed.
Report Type: billing, Report Num: 46,
Severity: minor, Threshhold: 50, Throttle: 0;
The details contain syntax in the form:
Element type = value; File name = value;
Location tag = value."
REFERENCE ""
::= { billingTraps 46 }
rkssUnreachableFor1Hour NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "RKSs unreachable for 1 hour.
Billing has not been able to communicate with any RKS for the past one hour.
Report Type: billing, Report Num: 47,
Severity: minor, Threshhold: 25, Throttle: 0;
The details contain syntax in the form:
Location tag = value."
REFERENCE ""
::= { billingTraps 47 }
rkssUnreachableFor3Hours NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "RKSs unreachable for 3 hours.
Billing has not been able to communicate with any RKS for the past three hours.
Report Type: billing, Report Num: 48,
Severity: major, Threshhold: 25, Throttle: 0;
The details contain syntax in the form:
Location tag = value."
REFERENCE ""
::= { billingTraps 48 }
rkssUnreachableFor5Hours NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "RKSs unreachable for 5 hours.
Billing has not been able to communicate with any RKS for the past five hours.
Report Type: billing, Report Num: 49,
Severity: critical, Threshhold: 25, Throttle: 0;
The details contain syntax in the form:
Location tag = value."
REFERENCE ""
::= { billingTraps 49 }
bdmsStoppedGeneratingNewBillingFile NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "BDMS stopped generating new billing file.
Call detail records are accumulating on the disk associated with the billing files in the EMS. This is because data is being written into the billing files faster than it is being forwarded to the Billing Mediation Server. FTP to the Billing Mediation Server may not be working. The maximum disk partition for billing has been exceeded or the maximum number of files has been exceeded.
Report Type: billing, Report Num: 52,
Severity: critical, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { billingTraps 52 }
eventMessageDiskSpace50PercentFull NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Event Message disk space 50 percent full.
Event Message storage has reached 50% of the maximum storage allowed.
Report Type: billing, Report Num: 53,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Number of megabytes used for Eve = value; Directory containing Event Messa = value;
Location tag = value."
REFERENCE ""
::= { billingTraps 53 }
eventMessageDiskSpace70PercentFull NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Event Message disk space 70 percent full.
Event Message storage has reached 70% of the maximum storage allowed.
Report Type: billing, Report Num: 54,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Number of megabytes used for Eve = value; Directory containing Event Messa = value;
Location tag = value."
REFERENCE ""
::= { billingTraps 54 }
eventMessageDiskSpace100PercentFull NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Event Message disk space 100 percent full.
Event Message storage has been completely filled. No additional Event Messages will be written to disk until more space is made available.
Report Type: billing, Report Num: 55,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Number of megabytes used for Eve = value; Directory containing Event Messa = value;
Location tag = value."
REFERENCE ""
::= { billingTraps 55 }
billingDataCorruptionDetected NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Billing data corruption detected.
Billing data stored on disk may have become corrupted due to a power outage, ungraceful shutdown, or disk failure.
Report Type: billing, Report Num: 56,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
File/table that may be corrupt = value; Low end of the range of records = value;
High end of the range of records = value; Error code = value;
Location tag = value."
REFERENCE ""
::= { billingTraps 56 }
prepaidSubscriberCallAttemptFailed0Balance NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Prepaid subscriber call attempt failed because 0 balance.
Subsriber has run out of the balance.
There may be a problem in billing info at prepaid server.
Report Type: billing, Report Num: 57,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
instance name = value; calling party = value;
called party = value; pop id= value."
REFERENCE ""
::= { billingTraps 57 }
signalingPrepaidServerInaccessible NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SIGNALING PREPAID SERVER INACCESSIBLE.
All the prepaid servers are down.
IP network between BTS POTS FS and the prepaid servers is down.
Report Type: billing, Report Num: 58,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
instance name = value; pop id = value;
radius profile id = value."
REFERENCE ""
::= { billingTraps 58 }
billingFileNameTypeChangeInCLIInconsistentWithWhatIsI NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION " Billing File Name Type Change in CLI inconsistent with what is i .
Report Type: billing, Report Num: 59,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { billingTraps 59 }
badFileDetected NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Bad file detected.
Bad billing file may be generated due to a CPU fatal, power outage, ungraceful shutdown, disk failure or improper operator intervention.
Report Type: billing, Report Num: 60,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
file-name of the bad file = value; diagnosis = value;
changed to file-name = value."
REFERENCE ""
::= { billingTraps 60 }
noRouteAvailableForCalledNumber NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "No Route Available for Called Number.
Call originates from a subscriber or trunk for a called party number that has no route available.
Parameter(s) in the subscriber and/or dial-plan table are missing or incorrect for this dialed number
Report Type: callp, Report Num: 8,
Severity: warning, Threshhold: 100, Throttle: 500;
The details contain syntax in the form:
Orig Type(Trunk or S = value; Orig Sub or TG id = value;
Calling Party Number = value; Called Party Number = value."
REFERENCE ""
::= { callpTraps 8 }
noRouteAvailableForCarrierDialed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "No Route Available for Carrier Dialed.
No route is available for the interexchange carrier (IXC) dialed.
Parameter(s) in the carrier and/or route-grp table are missing or incorrect for the carrier.
Report Type: callp, Report Num: 9,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Orig Type(Trunk or S = value; Orig Sub or TG id = value;
Calling Party Number = value; Called Party Number = value;
Carrier Code Dialed = value."
REFERENCE ""
::= { callpTraps 9 }
featureServerOneLinkDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Feature Server one link down.
Hardware Broken
Report Type: callp, Report Num: 11,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface Name = value; Interface IP Address = value."
REFERENCE ""
::= { callpTraps 11 }
featureServerBothLinksDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Feature Server Both links down.
Hardware Broken
Report Type: callp, Report Num: 12,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface Name = value; Interface IP Address = value;
Interface Name = value; Interface IP Address = value."
REFERENCE ""
::= { callpTraps 12 }
nasCRCXError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "NAS CRCX error.
Preauthentication failure
Report Type: callp, Report Num: 13,
Severity: info, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { callpTraps 13 }
nasAuthenticationFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "NAS Authentication Failure.
AAA Server denied the request
Report Type: callp, Report Num: 14,
Severity: info, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { callpTraps 14 }
cmtsERIDNotFoundInMGWTable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CMTS ER ID Not found in MGW table.
CMTS/ER Entry not found in Media gateway table
Report Type: callp, Report Num: 15,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
MGW-NAME = value."
REFERENCE ""
::= { callpTraps 15 }
routeIndexHasNoTrunkGroupAssigned NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Route Index has no Trunk Group Assigned.
A trunk group was not assigned to the given route.
Report Type: callp, Report Num: 16,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Route Index = value."
REFERENCE ""
::= { callpTraps 16 }
invalidRouteIndexUsed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid Route Index Used.
An invalid route index was used.
Report Type: callp, Report Num: 17,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Route Index = value."
REFERENCE ""
::= { callpTraps 17 }
unableToPlayAnnouncement NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unable to Play Announcement.
Announcement was not provisioned correctly.
Report Type: callp, Report Num: 18,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Announcement Index = value."
REFERENCE ""
::= { callpTraps 18 }
callRoutedToUnprovisionedSubscriber NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call Routed to Unprovisioned Subscriber.
Subscriber was not provisioned correctly.
Report Type: callp, Report Num: 19,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Subscriber Index = value; Directory Number Dia = value."
REFERENCE ""
::= { callpTraps 19 }
noRouteOrTrunkGroupAvailableToRouteCall NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "No Route or Trunk Group available to route call.
Trunk Group was not provisioned correctly in route.
Report Type: callp, Report Num: 20,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Calling Number = value; Called Number = value;
Route Index = value; Trunk Group ID = value."
REFERENCE ""
::= { callpTraps 20 }
callReleasedDueToMaximumHopCountsExceeded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call Released due to maximum hop counts exceeded.
Hops between destinations is excessive.
Report Type: callp, Report Num: 21,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Calling Number = value; Called Number = value;
Hop Count = value."
REFERENCE ""
::= { callpTraps 21 }
trunkGroupIndexReadFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Trunk Group Index Read Failure.
Trunk Group Index could not be retrieved from call_data.
Report Type: callp, Report Num: 22,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group Index = value; Call Index = value."
REFERENCE ""
::= { callpTraps 22 }
routingErrorTerminationIsNotASubscriber NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Routing Error: Termination is not a subscriber.
Destination Termination is not provisioned as a Subscriber.
Report Type: callp, Report Num: 23,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Termination Index = value; Termination Type = value."
REFERENCE ""
::= { callpTraps 23 }
invalidRouteForSubscriberIndex NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid Route for Subscriber Index.
Route is not provisioned correctly for specified subscriber.
Report Type: callp, Report Num: 24,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Route = value; Subscriber Index = value."
REFERENCE ""
::= { callpTraps 24 }
invalidRouteGroupForSubscriberRouting NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid Route Group for Subscriber Routing.
Route Group is not provisioned correctly for specified subscriber.
Report Type: callp, Report Num: 25,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Route = value; Subscriber Index = value."
REFERENCE ""
::= { callpTraps 25 }
invalidTrunkGroupForSubscriberRouting NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid Trunk Group for Subscriber Routing.
Trunk Group is not provisioned correctly for specified subscriber.
Report Type: callp, Report Num: 26,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group Index = value; Subscriber Index = value."
REFERENCE ""
::= { callpTraps 26 }
unableToRouteBlockedByDestinationSubscriberStatus NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unable to Route: Blocked by Destination Subscriber Status.
Subscriber is not in the correct state.
Report Type: callp, Report Num: 27,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Subscriber Index = value; Subscriber Status = value."
REFERENCE ""
::= { callpTraps 27 }
routeNameDoesNotExist NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Route Name does not exist.
Route is not correctly provisioned.
Report Type: callp, Report Num: 28,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Route Name = value."
REFERENCE ""
::= { callpTraps 28 }
routingSelectionFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Routing Selection Failure.
Route is not correctly provisioned.
Report Type: callp, Report Num: 29,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Route Index = value; Calling Number = value;
Called Number = value."
REFERENCE ""
::= { callpTraps 29 }
cotTestFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "COT Test Failed.
COT test has failed.
Report Type: callp, Report Num: 30,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Termination Index = value."
REFERENCE ""
::= { callpTraps 30 }
callAuthorizationFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call Authorization Failure.
Due to provisioning the call cannot be completed.
Report Type: callp, Report Num: 31,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Calling Number = value; Called Number = value."
REFERENCE ""
::= { callpTraps 31 }
countryCodeDialingPlanError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Country Code Dialing Plan Error.
The country code was not found in the Dial Plan
Report Type: callp, Report Num: 32,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Called Number = value; Dial Plan Index = value."
REFERENCE ""
::= { callpTraps 32 }
invalidCall NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid Call.
The Call could not be completed because the number entered was invalid
Report Type: callp, Report Num: 33,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Calling Number = value; Called Number = value."
REFERENCE ""
::= { callpTraps 33 }
dialPlanInformationNotFoundForDigitsReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Dial Plan Information not found for digits received.
The Call could not be completed because the number entered could not be located in the dial-plan.
Report Type: callp, Report Num: 34,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Calling Number = value; Called Number = value;
Dial Plan Index = value."
REFERENCE ""
::= { callpTraps 34 }
dialPlanInformationForTestCallNotFound NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Dial Plan Information for Test Call not found.
The Test Call could not be completed because the number entered could not be located in the dial-plan.
Report Type: callp, Report Num: 35,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Dial Plan Index = value."
REFERENCE ""
::= { callpTraps 35 }
invalidOrUnknownNOA NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid or Unknown NOA.
The NOA was incorrect in the dial-plan.
Report Type: callp, Report Num: 36,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
NOA Received = value; Calling Number = value;
Called Number = value."
REFERENCE ""
::= { callpTraps 36 }
callFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call Failure.
The Call failed for the listed indication.
Report Type: callp, Report Num: 37,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Type of Call = value; Calling Number = value;
Called Number = value; Failure Indication = value."
REFERENCE ""
::= { callpTraps 37 }
releaseCause25ExchangeRoutingErrorReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Release Cause 25 Exchange Routing Error Received.
Received REL w/cause
#25
Report Type: callp, Report Num: 38,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { callpTraps 38 }
testCallBlockedDueToCongestionOrIsolation NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Test call blocked due to congestion or isolation.
IAM for test call blocked due to congestion/isolation. GR-317 1999 R3-214
Report Type: callp, Report Num: 39,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
cic = value; tgn-id = value;
dpc = value; opc = value."
REFERENCE ""
::= { callpTraps 39 }
ivrRTPSessionFail NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IVR RTP Session Fail.
The IVR server is not ready, or the connection failed.
Report Type: callp, Report Num: 40,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Route Guide ID = value; Trunk Group Index = value."
REFERENCE ""
::= { callpTraps 40 }
inviteMsgFromUnauthorizedCA NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "INVITE Msg from unauthorized CA.
CALL-AGENT Table is not configured properly.
Potential intrusion if the network-ID mismatch from local-network.
Report Type: callp, Report Num: 41,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Unauthorized Call Agent DN = value; Platform Name = value."
REFERENCE ""
::= { callpTraps 41 }
callFailedAfterLNPQueryWithLrnOfThisSwitchAndTheDnI NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call Failed after LNP Query with LRN of this switch and the DN i.
Report Type: callp, Report Num: 42,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { callpTraps 42 }
callpSipTriggerProvisioningError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "callp sip trigger provisioning error.
Report Type: callp, Report Num: 43,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { callpTraps 43 }
callpNoSipTrigContextFound NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "callp no sip trig context found .
Report Type: callp, Report Num: 44,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { callpTraps 44 }
conextInCallFromAppServerNotFound NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Conext in call from App Server not found.
Report Type: callp, Report Num: 45,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { callpTraps 45 }
theLimitOfCallsAllowedForThePoolHasBeenReached NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The limit of calls allowed for the Pool has been reached.
Report Type: callp, Report Num: 46,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Pool ID = value."
REFERENCE ""
::= { callpTraps 46 }
theSystemLimitOfCallsAllowedForPoolsHasBeenReached NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The system limit of calls allowed for Pools has been reached.
Report Type: callp, Report Num: 47,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { callpTraps 47 }
scfSessionTimerExpired NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SCF session timer expired.
Report Type: callp, Report Num: 48,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Public ID = value; Private ID= value;
Called Party = value; Call Start Time = value."
REFERENCE ""
::= { callpTraps 48 }
sharedIFCSetNotFound NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Shared IFC Set not found.
Report Type: callp, Report Num: 49,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Shared IFC Set ID = value."
REFERENCE ""
::= { callpTraps 49 }
asCannotBeReached NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "AS cannot be reached.
Report Type: callp, Report Num: 50,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
AS URL = value; AS IP Address = value."
REFERENCE ""
::= { callpTraps 50 }
signalingMGAWronglyConfiguredDomainName NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Signaling MGA wrongly configured domain name.
Domain name is invalid.
(Atleast)half of the local machine address does not match MGCP domain name.
Report Type: config, Report Num: 2,
Severity: info, Threshhold: 1, Throttle: 1;
The details contain syntax in the form:
configured domain na = value; cause = value."
REFERENCE ""
::= { configTraps 2 }
kamMateConfigurationError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Mate configuration error.
Mate and local are configured to be of same side.
Mate is configured with wrong mate Red DNS name.
Mate Red. DNS entries are changed.
Report Type: config, Report Num: 3,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Reason = value."
REFERENCE ""
::= { configTraps 3 }
configurationError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Configuration Error.
wrong configuration in the platform.cfg
Report Type: config, Report Num: 4,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Reason = value."
REFERENCE ""
::= { configTraps 4 }
featureServerDBAndCommandLineHostMismatch NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "FEATURE-SERVER DB and Command Line Host Mismatch.
FEATURE-SERVER Table misconfigured.
Report Type: config, Report Num: 5,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Command Line DN = value; FEATURE-SERVER DN = value;
Platform Name = value."
REFERENCE ""
::= { configTraps 5 }
fimxmlParseError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "FIMXML Parse Error.
Report Type: config, Report Num: 6,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { configTraps 6 }
applicationServerProvisioningError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Application Server Provisioning Error.
Report Type: config, Report Num: 7,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { configTraps 7 }
btsProvisioningForExternalApplicationsIsNotComplete NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "BTS Provisioning for external applications is not complete.
Report Type: config, Report Num: 8,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { configTraps 8 }
dbmUpdateFailureMasterSlaveDatabaseOutOfSynch NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "DBM Update Failure: Master/Slave Database out of synch.
The master database under Oracle control in the EMS was successfully updated, but the subsequent update of the shared memory tables in the CA(s) and/or FS(s) were not properly updated.
Report Type: database, Report Num: 2,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Error Code = value; Error String = value;
Provisioning String = value."
REFERENCE ""
::= { databaseTraps 2 }
thereAreErrorsInEMSDatabaseDefErrorQueueContactDBA NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "There are errors in EMS database DefError queue; contact DBA.
Replication data conflicts.
Update/delete on non-existing data.
Unique constraint (Primary key) violated.
Report Type: database, Report Num: 3,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; DatabaseName = value;
ErrorCount = value; TimeStamp = value."
REFERENCE ""
::= { databaseTraps 3 }
emsDbHeartBeatReplicationPUSHJobBroken NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS db_heart_beat: replication PUSH job broken.
Remote database is not accessible.
Remote database is down.
Remote Oracle Listener process died.
Network connection is broken.
Report Type: database, Report Num: 4,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; LocalDatabase = value;
RemoteDatabase = value; Job = value;
TimeStamp = value."
REFERENCE ""
::= { databaseTraps 4 }
emsDbHeartBeatProcessDied NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS DBHeartBeat process died.
Terminated by SMG, or stopped by platform.
Report Type: database, Report Num: 5,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; DatabaseName = value;
TimeStamp = value."
REFERENCE ""
::= { databaseTraps 5 }
emsDatabaseReplicationDefTranDestQueueOverloaded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS database replication DefTranDest queue overloaded.
Replication PUSH job is broken.
Remote database is not accessible.
Database is overloaded.
Report Type: database, Report Num: 6,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; DatabaseName = value;
Threshold = value; TimeStamp = value."
REFERENCE ""
::= { databaseTraps 6 }
emsDatabaseDefTranQueueIsOverloaded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS database DefTran queue is overloaded.
Replication DefTranDest queue is overloaded.
Too many errors in DefError queue.
Replication PURGE job is broken or overloaded.
Report Type: database, Report Num: 7,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; DatabaseName = value;
Threshold = value; TimeStamp = value."
REFERENCE ""
::= { databaseTraps 7 }
emsDatabaseTablespaceIsOutOfFreeSpace NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS database tablespace is out of free space..
Increased data volume or transactions.
Report Type: database, Report Num: 8,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; DatabaseName = value;
TablespaceName = value; TotalFreeSpace = value;
TimeStamp = value."
REFERENCE ""
::= { databaseTraps 8 }
urgentEMSDatabaseArchiveLogDirectoryIsGettingFull NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "URGENT: EMS database archive log directory is getting full!.
Transaction volume increased.
Report Type: database, Report Num: 9,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; DatabaseName = value;
DirectoryName = value; FreeSpace = value;
TimeStamp = value."
REFERENCE ""
::= { databaseTraps 9 }
emsDatabaseBackupFails NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS database: Backup fails.
System or hardware unstable.
Report Type: database, Report Num: 10,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; DatabaseName = value;
Message1 = value; Message2 = value;
TimeStamp = value."
REFERENCE ""
::= { databaseTraps 10 }
emsDatabaseAlertlogAlerts NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS database alert.log alerts..
Unknown
Report Type: database, Report Num: 11,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; DatabaseName = value;
Message1 = value; Message2 = value;
TimeStamp = value."
REFERENCE ""
::= { databaseTraps 11 }
emsDatabaseProcessDied NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS database process died.
Possible Error Source: 1. Process Name, if local process is not running. 2. 'Cannot_connect_database' if local DB is unreachable. 3. 'Cannot_connect_' if remote DB is unreachable.
Report Type: database, Report Num: 12,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; DatabaseName = value;
ErrorSource = value; Message = value;
TimeStamp = value."
REFERENCE ""
::= { databaseTraps 12 }
emsDatabasePerformanceAlert NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS database performance alert..
See StatEvenName
Report Type: database, Report Num: 13,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HostName = value; DatabaseName = value;
StatEventName = value; Value1 = value;
Value2 = value; Message = value;
TimeStamp = value."
REFERENCE ""
::= { databaseTraps 13 }
tableSizeExceedsMinorThresholdLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Table Size Exceeds Minor Threshold Limit.
The pre-provisioned size for the stated table is nearing the licensed limit on the number of entries it can hold
Report Type: database, Report Num: 14,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
TableName = value; Size = value;
Used = value."
REFERENCE ""
::= { databaseTraps 14 }
tableSizeExceedsMajorThresholdLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Table Size Exceeds Major Threshold Limit.
Major threshold limit exceeded
Report Type: database, Report Num: 15,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
TableName = value; Size = value;
Used = value."
REFERENCE ""
::= { databaseTraps 15 }
tableSizeExceedsCriticalThresholdLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Table Size Exceeds Critical Threshold Limit.
Critical threshold limit exceeded
Report Type: database, Report Num: 16,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
TableName = value; Size = value;
Used = value."
REFERENCE ""
::= { databaseTraps 16 }
dataReplicationFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Data replication failed.
index out of range
record size mismatch
Report Type: database, Report Num: 17,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Replication-stage = value; Table Name = value;
Index = value; Table id = value."
REFERENCE ""
::= { databaseTraps 17 }
unexpectedRuntimeDataInteraction NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unexpected runtime data interaction.
Unexpected data interaction has been detected at runtime in the call agent or feature server.
Report Type: database, Report Num: 18,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Internal/External In = value; Table Name = value;
Table Entry = value; Table Field Name = value;
Descriptive Data1 = value; Descriptive Data2 = value;
Descriptive Data3 = value; Descriptive Data4 = value."
REFERENCE ""
::= { databaseTraps 18 }
dailyDatabaseBackupCompletedSuccessfully NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Daily database backup completed successfully.
Normal operaton
None
None
None
Report Type: database, Report Num: 19,
Severity: info, Threshhold: 0, Throttle: 0;
The details contain syntax in the form:
HOSTNAME = value; ORACLE_SID = value;
PROCESS = value; Message1 = value;
Message2 = value; Message3 = value."
REFERENCE ""
::= { databaseTraps 19 }
replicationDataFlushTimeoutDuringSwitchover NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Replication data flush timeout during switchover.
Replication Module software problem
Report Type: database, Report Num: 20,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Tables failed = value."
REFERENCE ""
::= { databaseTraps 20 }
dbStatisticsCollectionException NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "DB statistics collection exception.
Check the messages in the Exception field to identify the cause of the the error.
Report Type: database, Report Num: 21,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; DatabaseName = value;
SchemaName = value; ObjectName = value;
TaskName = value; Exception = value."
REFERENCE ""
::= { databaseTraps 21 }
unprovisionedLanguage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unprovisioned Language.
Report Type: database, Report Num: 22,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { databaseTraps 22 }
emsOracleDatabaseORAminorError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS Oracle database ORA-minor error.
Report Type: database, Report Num: 23,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { databaseTraps 23 }
emsOracleDatabaseORAmajorError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "EMS Oracle database ORA-major error.
Report Type: database, Report Num: 24,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { databaseTraps 24 }
sftpTransferFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SFTP transfer failed.
Unable to connect between active and standby CAs.
Report Type: database, Report Num: 25,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
File Name = value; Error = value."
REFERENCE ""
::= { databaseTraps 25 }
errorWriteFile NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "File write error.
System error, may be out of file descriptors.
Report Type: database, Report Num: 26,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Path Name = value."
REFERENCE ""
::= { databaseTraps 26 }
failureSettingIdxTableSoftLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Failure setting IDX table soft limit.
Report Type: database, Report Num: 27,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Reason = value; Table Name = value;
Soft Limit = value."
REFERENCE ""
::= { databaseTraps 27 }
reportThresholdExceeded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Report Threshold Exceeded.
Issu d when the threshold for a given report type and number is exceeded.
Report Type: maintenance, Report Num: 2,
Severity: info, Threshhold: 0, Throttle: 0;
The details contain syntax in the form:
Report Type = value; Report Number = value;
Threshold Level = value."
REFERENCE ""
::= { maintenanceTraps 2 }
kamLocalSideHasBecomeFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Local Side has become Faulty.
Can result from maintenance report 5, 6, 9, 10, 19, 20.
Manually shutting down the system using platform stop command.
Report Type: maintenance, Report Num: 3,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value;
Reason = value; Probable cause = value."
REFERENCE ""
::= { maintenanceTraps 3 }
kamMateSideHasBecomeFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Mate Side has become Faulty.
Local side has detected the mate side going to faulty state.
Report Type: maintenance, Report Num: 4,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value;
Reason = value; Probable cause = value;
Mate Ping = value."
REFERENCE ""
::= { maintenanceTraps 4 }
kamChangeoverFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Changeover Failure.
Issued when changing from an active processor to a standby and the changeover fails.
This alarm is usually caused by a software problem on the specific platform identified in the alarm report.
Report Type: maintenance, Report Num: 5,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value."
REFERENCE ""
::= { maintenanceTraps 5 }
kamChangeoverTimeout NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Changeover Timeout.
System failed to changeover within time period. Soon after this event is issued, one platform will go to faulty state.
This alarm is usually caused by a software problem on the specific platform identified in the alarm report.
Report Type: maintenance, Report Num: 6,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value."
REFERENCE ""
::= { maintenanceTraps 6 }
kamMateRejectedChangeover NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Mate Rejected Changeover.
Mate is not yet in stable state.
Mate detects itself faulty during changeover and then rejects changeover. Note: This attempted changeover could be caused by a forced (operator) switch, or could be caused by secondary instance rejecting changeover as primary is being brought up.
Report Type: maintenance, Report Num: 7,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value."
REFERENCE ""
::= { maintenanceTraps 7 }
kamMateChangeoverTimeout NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Mate Changeover Timeout.
Faulty mate.
Report Type: maintenance, Report Num: 8,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value."
REFERENCE ""
::= { maintenanceTraps 8 }
kamLocalInitializationFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Local Initialization Failure.
Local initialization has failed.
Report Type: maintenance, Report Num: 9,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value."
REFERENCE ""
::= { maintenanceTraps 9 }
kamLocalInitializationTimeout NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Local Initialization Timeout.
Local initialization has timed out.
When the event report is issued, the system has failed and the re-initialization process has failed.
Report Type: maintenance, Report Num: 10,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value."
REFERENCE ""
::= { maintenanceTraps 10 }
switchoverComplete NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Switchover Complete.
Acknowledges that the changeover successfully completed.
Report Type: maintenance, Report Num: 11,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value."
REFERENCE ""
::= { maintenanceTraps 11 }
kamInitializationSuccessful NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Initialization Successful.
Initiates a local initialization that is successful.
Report Type: maintenance, Report Num: 12,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value."
REFERENCE ""
::= { maintenanceTraps 12 }
adminStateChange NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Admin State Change.
The administrative state of a managed resource has changed
Report Type: maintenance, Report Num: 13,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Facility Type = value; Facility Id = value;
Initial Admin State = value; Target Admin State = value;
Current Admin State = value."
REFERENCE ""
::= { maintenanceTraps 13 }
callAgentAdminStateChange NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call Agent Admin State Change.
Informational:Indicates that call agent has changed operational state as a result of a manual switchover (control command in CLI).
Report Type: maintenance, Report Num: 14,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Call Agent Id = value; Current Local State = value;
Current Mate State = value."
REFERENCE ""
::= { maintenanceTraps 14 }
featureServerAdminStateChange NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Feature Server Admin State Change.
Informational: Indicates that call agent has changed operational state as a result of a manual switchover (control command in CLI).
Report Type: maintenance, Report Num: 15,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Feature Server Id = value; Feature Server Type = value;
Current Local State = value; Current Mate State = value."
REFERENCE ""
::= { maintenanceTraps 15 }
pmgStartingProcess NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Starting Process.
Informational:process is being started as system is being brought up.
Report Type: maintenance, Report Num: 16,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Restart Type = value;
Restart Mode = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 16 }
invalidEventReportReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid Event Report Received.
Indicates that a process has sent an Event Report that cannot be found in the database.
Report Type: maintenance, Report Num: 17,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Report Type = value; ReportNumber = value;
Validation Failure = value."
REFERENCE ""
::= { maintenanceTraps 17 }
pmgProcessHasDied NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Process has Died.
Software problem.
Report Type: maintenance, Report Num: 18,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 18 }
pmgProcessExceededRestartRate NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Process Exceeded Restart Rate.
This alarm is usually caused by a software problem on the specific platform identified in the alarm report. Soon after this event is issued, one platform will go to faulty state.
Report Type: maintenance, Report Num: 19,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Restart Rate = value;
Process Group = value."
REFERENCE ""
::= { maintenanceTraps 19 }
kamLostKAMConnectionToMate NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Lost KAM Connection to Mate.
Network interface hardware problem.
Router problem.
Soon after this event is issued, one platform may go to faulty state.
Report Type: maintenance, Report Num: 20,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Mate ping = value."
REFERENCE ""
::= { maintenanceTraps 20 }
kamNetworkInterfaceDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Network Interface Down.
Network interface hardware problem.
Soon after this event is issued, one platform may go to faulty state.
Report Type: maintenance, Report Num: 21,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
IP Address = value."
REFERENCE ""
::= { maintenanceTraps 21 }
kamMateIsAlive NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: Mate is Alive.
Report Type: maintenance, Report Num: 22,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local State = value; Mate State = value."
REFERENCE ""
::= { maintenanceTraps 22 }
pmgProcessFailedToCompleteInitialization NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Process Failed to Complete Initialization.
The specified process failed to complete initialization during the restoral process.
Report Type: maintenance, Report Num: 23,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 23 }
pmgRestartingProcess NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Restarting Process.
Software problem process has exited abnormally and had to be restarted.
Report Type: maintenance, Report Num: 24,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Restart Type = value;
Restart Mode = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 24 }
pmgChangingState NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Changing State.
Report Type: maintenance, Report Num: 25,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Platform State = value."
REFERENCE ""
::= { maintenanceTraps 25 }
pmgGoingFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Going Faulty.
System has been brought down/system has detected a fault.
Report Type: maintenance, Report Num: 26,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Reason = value."
REFERENCE ""
::= { maintenanceTraps 26 }
pmgChangingOverToActive NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Changing Over to Active.
Report Type: maintenance, Report Num: 27,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
null = value."
REFERENCE ""
::= { maintenanceTraps 27 }
pmgChangingOverToStandby NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Changing Over to Standby.
Report Type: maintenance, Report Num: 28,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
null = value."
REFERENCE ""
::= { maintenanceTraps 28 }
adminStateChangeFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Admin State Change Failure.
An attempt to change the Administrative state of a device has failed.
Report Type: maintenance, Report Num: 29,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Facility Type = value; Facility Instance = value;
Failure Reason = value; Initial Admin State = value;
Target Admin State = value; Current Admin State = value."
REFERENCE ""
::= { maintenanceTraps 29 }
elementManagerStateChange NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Element Manager State Change.
The specified EMS has changed to the indicated state either naturally or via user request.
Report Type: maintenance, Report Num: 30,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Element Manager ID = value; Current Local State = value;
Current Mate State = value."
REFERENCE ""
::= { maintenanceTraps 30 }
pmgSendingGoActiveToProcess NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Sending Go Active to Process.
Informational:process is being notified to switch to active state as the system is switching over from standby to active.
Report Type: maintenance, Report Num: 32,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 32 }
pmgSendingGoStandbyToProcess NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Sending Go Standby to Process.
Informational: process is being notified to exit gracefully as the system is switching over to standby state, or is shutting down. The switchover or shutdown could be due to either of the following: (1) operator is taking the action to switch or shut down the system (2)the system has detected a fault
Report Type: maintenance, Report Num: 33,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 33 }
pmgSendingEndProcessToProcess NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Sending End Process to Process.
Informational: process is being notified to exit gracefully as the system is switching over to standby state, or is shutting down. The switchover or shutdown could be due to either of the following: (1) operator is taking the action to switch or shut down the system (2)the system has detected a fault
Report Type: maintenance, Report Num: 34,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 34 }
pmgAllProcessesCompletedInitialization NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: All Processes Completed Initialization.
Informational:The system is being brought up, and all processes are ready to start executing.
Report Type: maintenance, Report Num: 35,
Severity: info, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { maintenanceTraps 35 }
pmgSendingAllProcessesInitCompleteToProcess NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Sending All Processes Init Complete to Process.
Informational: The system is being brought up, and all processes are being notified to start executing
Report Type: maintenance, Report Num: 36,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 36 }
pmgKillingProcess NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Killing Process.
Informational: One of the following software problems occurred while the system was being brought up or shut down:
a process did not come up when the system was brought up and had to be killed in order to restart it.
a process did not exit when asked to exit
Report Type: maintenance, Report Num: 37,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 37 }
pmgClearingTheDatabase NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Clearing the Database.
Informational:The system is preparing to copy data from the mate. (The system has been brought up and the mate side is running.)
Report Type: maintenance, Report Num: 38,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
null = value."
REFERENCE ""
::= { maintenanceTraps 38 }
pmgClearedTheDatabase NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Cleared the Database.
Informational: The system is prepared to copy data from the mate. (The system has been brought up and the mate side is running.)
Report Type: maintenance, Report Num: 39,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
null = value."
REFERENCE ""
::= { maintenanceTraps 39 }
pmgBinaryDoesNotExistForProcess NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Binary does not exist for Process.
Platform not installed correctly
Report Type: maintenance, Report Num: 40,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Program Name = value; Executable Name = value."
REFERENCE ""
::= { maintenanceTraps 40 }
adminStateChangeSuccessfulWithWarning NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Admin State Change Successful with Warning.
Device was in a flux state.
Report Type: maintenance, Report Num: 41,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Facility Type = value; Facility Instance = value;
Initial State = value; Target State = value;
Current State = value; Warning Reason = value."
REFERENCE ""
::= { maintenanceTraps 41 }
kamOfHBMessagesReceivedIsLessThan50PercentOfExpected NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "KAM: # of HB messages received is less than 50% of expected.
Network Problem.
Report Type: maintenance, Report Num: 42,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface name = value; IP Address = value;
Expected HB messages = value; HB messages received = value."
REFERENCE ""
::= { maintenanceTraps 42 }
pmgProcessFailedToComeUpInActiveMode NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Process failed to come up in active mode.
Software or configuration problem
Report Type: maintenance, Report Num: 43,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 43 }
pmgProcessFailedToComeUpInStandbyMode NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PMG: Process failed to come up in standby mode.
Software or configuration problem
Report Type: maintenance, Report Num: 44,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Process Group = value."
REFERENCE ""
::= { maintenanceTraps 44 }
applicationInstanceStateChangeFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Application Instance State Change Failure.
Switchover of Application Instace Failed because of a Platform fault
Report Type: maintenance, Report Num: 45,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Application Instance = value; Failure Reason = value."
REFERENCE ""
::= { maintenanceTraps 45 }
networkInterfaceRestored NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Network interface restored.
interface cable is put back/interface is put 'up' using ifconfig command
Report Type: maintenance, Report Num: 46,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface name = value; interface IP address = value."
REFERENCE ""
::= { maintenanceTraps 46 }
threadWatchdogCounterExpiredForAThread NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Thread watchdog counter expired for a thread.
Software Error
Report Type: maintenance, Report Num: 47,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value."
REFERENCE ""
::= { maintenanceTraps 47 }
idxTableUsageExceededMinorUsageThresholdLevel NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IDX Table Usage Exceeded Minor Usage Threshold Level.
Call traffic above design limits.
Software problem requiring manufacture analysis.
Report Type: maintenance, Report Num: 48,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Table Name = value; Size = value;
Used = value."
REFERENCE ""
::= { maintenanceTraps 48 }
idxTableUsageExceededMajorUsageThresholdLevel NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IDX Table Usage Exceeded Major Usage Threshold Level.
Call traffic above design limits.
Software problem requiring manufacture analysis.
Report Type: maintenance, Report Num: 49,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Table Name = value; Table Size = value;
Used = value."
REFERENCE ""
::= { maintenanceTraps 49 }
idxTableUsageExceededCriticalUsageThresholdLevel NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IDX Table Usage Exceeded Critical Usage Threshold Level.
Call traffic above design limits.
Software problem requiring manufacture analysis.
Report Type: maintenance, Report Num: 50,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Table Name = value; Table Size = value;
Used = value."
REFERENCE ""
::= { maintenanceTraps 50 }
aProcessExceeds70PercentOfCPUUsage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "A process exceeds 70% of CPU Usage.
A process has entered a state of irratic behavior.
Report Type: maintenance, Report Num: 51,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; PID = value;
Process Name = value; CPU Usage = value."
REFERENCE ""
::= { maintenanceTraps 51 }
cpuUsageIsNowBelowThe50PercentLevel NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CPU usage is now below the 50% level.
No probable cause is necessary.
Report Type: maintenance, Report Num: 52,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; PID = value;
Process name = value; CPU usage = value."
REFERENCE ""
::= { maintenanceTraps 52 }
theCPUUsageIsOver90PercentBusy NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The CPU usage is over 90% busy.
To numerous to determine.
Report Type: maintenance, Report Num: 53,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; CPU Usage = value."
REFERENCE ""
::= { maintenanceTraps 53 }
theCPUHasReturnedToNormalLevelsOfOperation NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The CPU has returned to normal levels of operation..
N/A
Report Type: maintenance, Report Num: 54,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; CPU Usage = value."
REFERENCE ""
::= { maintenanceTraps 54 }
the5MinuteLoadAverageIsAbnormallyHigh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The 5 minute load average is abnormally high.
Multiple processes are vying for processing time on the system, which is normal in a high traffic situation such as heavy call processing or bulk provisioning.
Report Type: maintenance, Report Num: 55,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; Load Average = value."
REFERENCE ""
::= { maintenanceTraps 55 }
theLoadAverageHasReturnedToNormalLevels NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The load average has returned to normal levels..
N/A
Report Type: maintenance, Report Num: 56,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; Load Average = value."
REFERENCE ""
::= { maintenanceTraps 56 }
memoryAndSwapAreConsumedAtCriticalLevels NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Memory and swap are consumed at critical levels.
A process or multiple processes have consumed a critical amount of memory on the system and the operating system is utilizing a critical amount of the swap space for process execution. This can be a result of high call rates or bulk provisioning activity.
Report Type: maintenance, Report Num: 57,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; Memory = value;
Swap = value."
REFERENCE ""
::= { maintenanceTraps 57 }
memoryAndSwapAreConsumedAtAbnormalLevels NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Memory and swap are consumed at abnormal levels.
A process or multiple processes have consumed an abnormal amount of memory on the system and the operating system is utilizing an abnormal amount of the swap space for process execution. This can be a result of high call rates or bulk provisioning activity.
Report Type: maintenance, Report Num: 58,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; Memory = value;
Swap = value."
REFERENCE ""
::= { maintenanceTraps 58 }
diskReportsGreaterThan70PercentUtilization NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Disk reports greater than 70% utilization.
N/A
Report Type: maintenance, Report Num: 59,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; Disk = value;
Usage = value."
REFERENCE ""
::= { maintenanceTraps 59 }
diskUtilizationHasReturnedToNormalLevels NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Disk utilization has returned to normal levels..
N/A
Report Type: maintenance, Report Num: 60,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; Disk = value;
Usage = value."
REFERENCE ""
::= { maintenanceTraps 60 }
noHBMessagesReceivedThroughTheInterface NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "No HB messages received through the interface.
local network interface down
mate network interface on the same sub-net is faulty
network congestion
Report Type: maintenance, Report Num: 61,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface Name = value; Interface IP address = value."
REFERENCE ""
::= { maintenanceTraps 61 }
linkMonitorInterfaceLostCommunication NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Link Monitor: Interface lost communication.
interface cable is pulled out/interface is set 'down' using ifconfig command
interface has no connectivity to any of the machines/routers
Report Type: maintenance, Report Num: 62,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface Name = value; Interface IP address = value."
REFERENCE ""
::= { maintenanceTraps 62 }
outgoingHBPeriodExceededLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Outgoing HB period exceeded limit.
This is caused by system performance degradation due to CPU overload or excessive I/O operations.
Report Type: maintenance, Report Num: 63,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Max. HB period(ms) = value; HB period(ms) = value."
REFERENCE ""
::= { maintenanceTraps 63 }
averageOutgoingHBPeriodExceedsMajAlarmLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Average outgoing HB period exceeds Maj Alarm limit.
This is caused by system performance degradation due to CPU overload or excessive I/O operations.
Report Type: maintenance, Report Num: 64,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Max. Avg HB period = value; Avg. HB period(ms) = value."
REFERENCE ""
::= { maintenanceTraps 64 }
diskPartitionCriticallyConsumed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Disk Partition Critically Consumed.
A process or processes is/are writing extraneous data to the named parition.
Report Type: maintenance, Report Num: 65,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Directory = value; Device = value;
Percentage Used = value."
REFERENCE ""
::= { maintenanceTraps 65 }
diskPartitionSignificantlyConsumed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Disk Partition Significantly Consumed.
A process or processes is/are writing extraneous data to the named parition.
Report Type: maintenance, Report Num: 66,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Directory = value; Device = value;
Percentage Used = value."
REFERENCE ""
::= { maintenanceTraps 66 }
theFreeIpcPoolBuffersBelowMinorThreshold NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The free ipc pool buffers below minor threshold.
IPC pool buffers are not being freed properly by the application or the application is not able to keep up with the incoming IPC messaging traffic.
Report Type: maintenance, Report Num: 67,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Free ipc pool buffer = value; Threshold = value."
REFERENCE ""
::= { maintenanceTraps 67 }
theFreeIpcPoolBuffersBelowMajorThreshold NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The free ipc pool buffers below major threshold.
IPC pool buffers are not being freed properly by the application or the application is not able to keep up with the incoming IPC messaging traffic.
Report Type: maintenance, Report Num: 68,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Free ipc poll buffer = value; Threshold = value."
REFERENCE ""
::= { maintenanceTraps 68 }
theFreeIpcPoolBuffersBelowCriticalThreshold NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The free ipc pool buffers below critical threshold.
IPC pool buffers are not being freed properly by the application or the application is not able to keep up with the incoming IPC messaging traffic.
Report Type: maintenance, Report Num: 69,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Free ipc poll buffer = value; Threshold = value."
REFERENCE ""
::= { maintenanceTraps 69 }
theFreeIpcPoolBufferCountBelowMinimumRequiredForSh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "The free ipc pool buffer count below minimum required for sh.
IPC pool buffers are not being freed properly by the application or the application is not able to keep up with the incoming IPC messaging traffic.
Report Type: maintenance, Report Num: 70,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Free ipc buffer coun = value; minimum count = value."
REFERENCE ""
::= { maintenanceTraps 70 }
localDNSServerResponseTooSlow NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Local DNS server response too slow.
Local DNS server too busy
Report Type: maintenance, Report Num: 71,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
DNS server IP = value."
REFERENCE ""
::= { maintenanceTraps 71 }
externalDNSServerResponseTooSlow NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "External DNS server response too slow.
The network traffic is busy, or the nameserver is very busy.
There is an daemon called monitorDNS.sh checking
DNS server every minute or so. It will issue
alarm if it cannot contact the DNS server or the
response is slow. But it will clear the alarm if
later it can contact the DNS server.
Report Type: maintenance, Report Num: 72,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
DNS server IP = value."
REFERENCE ""
::= { maintenanceTraps 72 }
externalDNSServerNotResponsive NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "External DNS server not responsive.
DNS servers or the network may be down.
There is an daemon called monitorDNS.sh checking
DNS server every minute or so. It will issue
alarm if it cannot contact the DNS server or the
response is slow. But it will clear the alarm if
later it can contact the DNS server.
Report Type: maintenance, Report Num: 73,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
DNS server IP = value."
REFERENCE ""
::= { maintenanceTraps 73 }
localDNSServiceNotResponsive NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Local DNS service not responsive.
Local DNS service may be down
Report Type: maintenance, Report Num: 74,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
DNS server IP = value."
REFERENCE ""
::= { maintenanceTraps 74 }
mismatchOfIPAddrPercentLocalServerAndDNS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Mismatch of IP addr % local server and DNS.
DNS updates are not getting to the BTS from the external server, or the discrepancy was detected before the local DNS lookup table was updated.
Report Type: maintenance, Report Num: 75,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
hostname = value; IP addr local server = value;
IP addr DNS server = value."
REFERENCE ""
::= { maintenanceTraps 75 }
mateTimeDiffersBeyondTolerance NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Mate time differs beyond tolerance.
Time synchronization not working.
Report Type: maintenance, Report Num: 77,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Max time difference(sec) = value; Actual time difference(sec) = value."
REFERENCE ""
::= { maintenanceTraps 77 }
bdmsAdminStateChange NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "BDMS Admin State Change.
The Bulk Data Management Server was switched over manually.
Report Type: maintenance, Report Num: 78,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Application Instance = value; Local State = value;
Mate State = value."
REFERENCE ""
::= { maintenanceTraps 78 }
resourceReset NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Resource Reset.
Trunk-Termination Subscriber_termination Media Gateways
Report Type: maintenance, Report Num: 79,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Resource Type = value; Resource Instance = value."
REFERENCE ""
::= { maintenanceTraps 79 }
resourceResetWarning NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Resource Reset Warning.
Trunk-Termination Subscriber-Termination Media Gateway
Report Type: maintenance, Report Num: 80,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Resource Type = value; Resource Instance = value;
Warning Reason = value."
REFERENCE ""
::= { maintenanceTraps 80 }
resourceResetFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Resource Reset Failure.
This the result of an internal messaging error.
Report Type: maintenance, Report Num: 81,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Resource Type = value; Resource Instance = value;
Failure Reason = value."
REFERENCE ""
::= { maintenanceTraps 81 }
averageOutgoingHBPeriodExceedsCriticalLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Average outgoing HB period exceeds Critical limit.
CPU Overload
Report Type: maintenance, Report Num: 82,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Critical threshold f = value; Current avg. HB peri = value."
REFERENCE ""
::= { maintenanceTraps 82 }
swapSpaceBelowMinorThreshold NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Swap space below minor threshold.
Too many processes
/tmp or /var/run are over-used
Report Type: maintenance, Report Num: 83,
Severity: minor, Threshhold: 5, Throttle: 0;
The details contain syntax in the form:
Minor threshold (MB) = value; Current value (MB) = value."
REFERENCE ""
::= { maintenanceTraps 83 }
swapSpaceBelowMajorThreshold NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Swap space below major threshold.
Too many processes
/tmp or /var/run over-used
Report Type: maintenance, Report Num: 84,
Severity: major, Threshhold: 5, Throttle: 0;
The details contain syntax in the form:
Major threshold (MB) = value; Current value (MB) = value."
REFERENCE ""
::= { maintenanceTraps 84 }
swapSpaceBelowCriticalThreshold NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Swap space below critical threshold.
Too many processes
/tmp or /var/run are over-used
Report Type: maintenance, Report Num: 85,
Severity: critical, Threshhold: 5, Throttle: 0;
The details contain syntax in the form:
Critical threshold(M = value; Current value (MB) = value."
REFERENCE ""
::= { maintenanceTraps 85 }
systemHealthReportCollectionError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "System Health Report Collection Error.
An error occur while collecting System Health Report.
Report Type: maintenance, Report Num: 86,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
ErrString = value."
REFERENCE ""
::= { maintenanceTraps 86 }
statusUpdateProcessRequestFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Status Update Process Request Failed.
'status' command not working properly
Report Type: maintenance, Report Num: 87,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
ErrString = value; ComponentType = value."
REFERENCE ""
::= { maintenanceTraps 87 }
statusUpdateProcessDBListRetrievalError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Status Update Process DB List Retrieval Error.
Oracle DB is not working properly
Report Type: maintenance, Report Num: 88,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
ErrString = value."
REFERENCE ""
::= { maintenanceTraps 88 }
statusUpdateProcessDBUpdateError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Status Update Process DB Update Error.
MySQL DB on EMS is not working properly
Report Type: maintenance, Report Num: 89,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
ErrString = value; SQLCommand = value."
REFERENCE ""
::= { maintenanceTraps 89 }
diskPartitionModeratelyConsumed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Disk Partition Moderately Consumed.
A process or processes is/are writing extraneous data to the named parition.
Report Type: maintenance, Report Num: 90,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Directory = value; Device = value;
Percentage Used = value."
REFERENCE ""
::= { maintenanceTraps 90 }
ipmConfigFileError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPM config file error.
IPM config file error
Report Type: maintenance, Report Num: 91,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
REASON = value."
REFERENCE ""
::= { maintenanceTraps 91 }
ipmInitializationError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPM initialization error.
IPM failed to initialize correctly
Report Type: maintenance, Report Num: 92,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
REASON = value."
REFERENCE ""
::= { maintenanceTraps 92 }
ipmInterfaceFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPM interface failure.
IPM failed to create logical interface
Report Type: maintenance, Report Num: 93,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
INTERFACE_NAME = value; REASON = value."
REFERENCE ""
::= { maintenanceTraps 93 }
ipmInterfaceStateChange NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPM interface state change.
IPM changed state on an interface (up/down)
Report Type: maintenance, Report Num: 94,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
INTERFACE_NAME = value; STATE = value."
REFERENCE ""
::= { maintenanceTraps 94 }
ipmInterfaceCreated NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPM interface created.
IPM created a new logical interface
Report Type: maintenance, Report Num: 95,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HOSTNAME = value; PHYSICAL_IF_NAME = value;
LOGICAL_IF_NAME = value; IP_ADDR = value;
NETMASK = value; BROADCAST_ADDR = value."
REFERENCE ""
::= { maintenanceTraps 95 }
ipmInterfaceRemoved NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPM interface removed.
IPM removed a logical interface
Report Type: maintenance, Report Num: 96,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
HOSTNAME = value; LOGICAL_IF_NAME = value;
IP_ADDR = value."
REFERENCE ""
::= { maintenanceTraps 96 }
ipcInputQueueEnteredThrottleState NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPC Input Queue Entered Throttle State.
The indicated thread is not able to process its IPC input messages fast enough, hence the input queue has grown too large and is using up too much of the IPC memory pool resource.
Report Type: maintenance, Report Num: 97,
Severity: critical, Threshhold: 500, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value; Hi Watermark = value;
Lo Watermark = value."
REFERENCE ""
::= { maintenanceTraps 97 }
ipcInputQueueDepthAt25pcOfItsHiWatermark NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPC Input Queue Depth At 25pc Of Its Hi-Watermark.
The indicated thread is not able to process its IPC input messages fast enough, hence the input queue has grown too large and is at 25% of the level at which it will enter the throttle state.
Report Type: maintenance, Report Num: 98,
Severity: minor, Threshhold: 500, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value; Hi Watermark = value;
Lo Watermark = value."
REFERENCE ""
::= { maintenanceTraps 98 }
ipcInputQueueDepthAt50pcOfItsHiWatermark NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPC Input Queue Depth At 50pc Of Its Hi-Watermark.
The indicated thread is not able to process its IPC input messages fast enough, hence the input queue has grown too large and is at 50% of the level at which it will enter the throttle state.
Report Type: maintenance, Report Num: 99,
Severity: major, Threshhold: 500, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value; Hi Watermark = value;
Lo Watermark = value."
REFERENCE ""
::= { maintenanceTraps 99 }
ipcInputQueueDepthAt75pcOfItsHiWatermark NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPC Input Queue Depth At 75pc Of Its Hi-Watermark.
he indicated thread is not able to process its IPC input messages fast enough, hence the input queue has grown too large and is at 75% of the level at which it will enter the throttle state.
Report Type: maintenance, Report Num: 100,
Severity: critical, Threshhold: 500, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value; Hi Watermark = value;
Lo Watermark = value."
REFERENCE ""
::= { maintenanceTraps 100 }
switchoverInProgress NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Switchover in Progress.
This alarm is issued when system switchover either due to manual switchover (via CLI command), failover or automatic switchover.
Report Type: maintenance, Report Num: 101,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local state = value; Mate state = value;
Reason = value."
REFERENCE ""
::= { maintenanceTraps 101 }
threadWatchdogCounterCloseToExpiryForAThread NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Thread watchdog counter close to expiry for a thread.
Software Error
Report Type: maintenance, Report Num: 102,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value."
REFERENCE ""
::= { maintenanceTraps 102 }
cpuIsOffline NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CPU Is Offline.
Operator action
Report Type: maintenance, Report Num: 103,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Hostname = value; CPU = value."
REFERENCE ""
::= { maintenanceTraps 103 }
aggregrationDeviceAddressSuccessfullyResolved NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Aggregration Device Address Successfully Resolved.
Informational.
Report Type: maintenance, Report Num: 104,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
MGW IP address = value; MGW ID = value;
AGGR ID = value; Network Address = value;
Subnet mask = value."
REFERENCE ""
::= { maintenanceTraps 104 }
unprovisionedAggregrationDeviceDetected NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Unprovisioned Aggregration Device Detected.
AGGR IP address is not provisioned in AGGR table.
Report Type: maintenance, Report Num: 105,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
AGGR IP address = value; MGW IP address = value;
MGW ID = value."
REFERENCE ""
::= { maintenanceTraps 105 }
aggregrationDeviceAddressResolutionFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Aggregration Device Address Resolution Failure.
Auto AGGR-ID resolution for MGW IP failed due to DNS lookup failure.
Report Type: maintenance, Report Num: 106,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Reason Code = value; MGW ID = value;
Reason = value."
REFERENCE ""
::= { maintenanceTraps 106 }
noHBMessagesReceivedThroughInterfaceFromRouter NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "No HB messages received through interface from router.
Router is down.
Connection to router down.
Network congestion.
Report Type: maintenance, Report Num: 107,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface Name = value; Critical Local IP Address = value;
Router IP Address = value."
REFERENCE ""
::= { maintenanceTraps 107 }
aLogFileCannotBeTransferred NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "a log file cannot be transferred.
problem in access to external archive system
the network to exteranl archive system is down
The source log file is not present
Report Type: maintenance, Report Num: 108,
Severity: warning, Threshhold: 5, Throttle: 0;
The details contain syntax in the form:
name of the file with full path = value; external archive system = value."
REFERENCE ""
::= { maintenanceTraps 108 }
fiveSuccessiveLogFilesCannotBeTransferred NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "5 successive log files cannot be transferred.
problem in access to external archive system
Network to external archive system is down
Report Type: maintenance, Report Num: 109,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
external archive systems = value."
REFERENCE ""
::= { maintenanceTraps 109 }
accessToLAFConfigurationFileFailedOrFileCorrutped NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "access to LAF configuration file failed or file corrutped.
file corrupted
The file is missing
Report Type: maintenance, Report Num: 110,
Severity: major, Threshhold: 10, Throttle: 0;
The details contain syntax in the form:
full path of LAF configuration f = value."
REFERENCE ""
::= { maintenanceTraps 110 }
cannotLoginToExternalArchiveServer NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Cannot login to external archive server.
No authorizaton accesss is set up in external archive server for that user from BTS
The external archive server is down
The network is down
Report Type: maintenance, Report Num: 111,
Severity: critical, Threshhold: 10, Throttle: 0;
The details contain syntax in the form:
external archive server = value; username = value."
REFERENCE ""
::= { maintenanceTraps 111 }
congestionStatus NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Congestion Status.
Report Type: maintenance, Report Num: 112,
Severity: major, Threshhold: 1000, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { maintenanceTraps 112 }
cpuLoadOfCriticalProcesses NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CPU Load of critical processes.
Report Type: maintenance, Report Num: 113,
Severity: info, Threshhold: 1000, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { maintenanceTraps 113 }
queueLengthOfCriticalProcesses NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Queue length of critical processes.
Report Type: maintenance, Report Num: 114,
Severity: info, Threshhold: 1000, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { maintenanceTraps 114 }
ipcBufferUsageLevel NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPC buffer usage level.
Report Type: maintenance, Report Num: 115,
Severity: info, Threshhold: 1000, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { maintenanceTraps 115 }
caReportsTheCongestionLevelOfFS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CA Reports the Congestion Level of FS.
Report Type: maintenance, Report Num: 116,
Severity: info, Threshhold: 1000, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { maintenanceTraps 116 }
sideAutomaticallyRestartingDueToFault NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Side automatically restarting due to fault.
Report Type: maintenance, Report Num: 117,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { maintenanceTraps 117 }
dnsZoneDatabaseNotMatchBetweenPrimaryDNSAndISADS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "DNS zone database not match between primary DNS and ISADS.
Report Type: maintenance, Report Num: 118,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { maintenanceTraps 118 }
periodicSharedMemoryDatabaseBackupFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Periodic Shared Memory Database Backup Failure.
High disk usage.
Report Type: maintenance, Report Num: 119,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Reason = value; Available Disk Space (MB) = value;
Required Disk Space (MB) = value."
REFERENCE ""
::= { maintenanceTraps 119 }
periodicSharedMemoryDatabaseBackupSuccess NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Periodic Shared Memory Database Backup Success.
Successful backup of the shared memory database
Report Type: maintenance, Report Num: 120,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Details = value."
REFERENCE ""
::= { maintenanceTraps 120 }
invalidSOAPRequest NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid SOAP Request.
Report Type: maintenance, Report Num: 121,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { maintenanceTraps 121 }
northboundProvisioningMessageIsRetransmitted NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Northbound provisioning message is retransmitted.
Report Type: maintenance, Report Num: 122,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Prov Time at Seconds = value; Prov Time at Milli Seconds = value;
Table Name = value; Update String = value."
REFERENCE ""
::= { maintenanceTraps 122 }
northboundProvisioningMessageDroppedDueToFullIDXTable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Northbound provisioning message dropped due to full IDX table.
Report Type: maintenance, Report Num: 123,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Prov Time at Seconds = value; Prov Time at Milli Seconds = value;
Table Name = value; Update String = value."
REFERENCE ""
::= { maintenanceTraps 123 }
periodicSharedMemorySyncStarted NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Periodic shared memory sync started.
Report Type: maintenance, Report Num: 124,
Severity: info, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { maintenanceTraps 124 }
periodicSharedMemorySyncCompleted NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Periodic shared memory sync completed.
Report Type: maintenance, Report Num: 125,
Severity: info, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { maintenanceTraps 125 }
periodicSharedMemorySyncFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Periodic shared memory sync failure.
Report Type: maintenance, Report Num: 126,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details= value."
REFERENCE ""
::= { maintenanceTraps 126 }
omssocketerrorDueToNetworkIssue NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Network issue causes the OMS socket errors.
Report Type: maintenance, Report Num: 127,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Failure Details= value."
REFERENCE ""
::= { maintenanceTraps 127 }
undefinedVariableInKnownSet NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Undefined variable in known set.
There was no definition of a data column that could be found in the database.
Report Type: oss, Report Num: 2,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Module Name = value; Field Name = value;
Field Value = value."
REFERENCE ""
::= { ossTraps 2 }
undefinedDataColumnId NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Undefined data column id.
The database does not contain the required data column that was requested via the SNMP interface.
Report Type: oss, Report Num: 3,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Noun = value; Data Column Id = value."
REFERENCE ""
::= { ossTraps 3 }
requestHandlerInstantiationError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Request Handler Instantiation Error.
Resource limitation has prevented the creation of this object. This may come from a lack of memory or Class Path problem.
Report Type: oss, Report Num: 4,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
User Name = value; Host = value;
Subsystem = value."
REFERENCE ""
::= { ossTraps 4 }
sqlErrorWhileGettingStatistics NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SQL Error While Getting Statistics.
An error occurred in accessing the SQL database for statistical information in the SNMP subsystem. This may result from schema error.
Report Type: oss, Report Num: 5,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Statistics Category = value."
REFERENCE ""
::= { ossTraps 5 }
sqlConnectionError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SQL Connection Error.
The connection to the database timed out or the database server is not running. This is generated in the SNMP subsystem.
Report Type: oss, Report Num: 6,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Error Exception = value."
REFERENCE ""
::= { ossTraps 6 }
snmpFileReadError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SNMP File Read Error.
The MIB file is missing or locked from access by the SNMP subsystem.
Report Type: oss, Report Num: 7,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Filename = value."
REFERENCE ""
::= { ossTraps 7 }
noReplyReceivedFromDestination NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "No Reply Received from Destination.
Received when there is no response to a CLI command from the Call Agent platform.
Report Type: oss, Report Num: 8,
Severity: minor, Threshhold: 100, Throttle: 5;
The details contain syntax in the form:
JMS Queue Name = value."
REFERENCE ""
::= { ossTraps 8 }
snmpAuthenticationError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SNMP Authentication error.
NMS issueing wrong community string
Report Type: oss, Report Num: 9,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
RemoteHost = value."
REFERENCE ""
::= { ossTraps 9 }
qamDBMIDXFailedWithError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "QAM DBM IDX Failed with Error.
QAM is receiving an error because of Data Mismatch between what is in DBM IDX and what is in EMS db (oracle).
DBM IDX is failing when attempting to perform SQL command.
Report Type: oss, Report Num: 10,
Severity: major, Threshhold: 50, Throttle: 0;
The details contain syntax in the form:
Transaction ID = value; Sequence Number = value;
Location Of Error = value; DBM Result = value."
REFERENCE ""
::= { ossTraps 10 }
qamDBMIDXMismatchDuringAddOrDelete NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "QAM DBM IDX mismatch during Add or Delete.
QAM is received a warning that either an entry already exists in DBM IDX during Add or an entry is nonexistent during a Delete operation.
Report Type: oss, Report Num: 11,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Transaction ID = value; Sequence Number = value;
Location Of Error = value; DBM Result = value."
REFERENCE ""
::= { ossTraps 11 }
userSessionCountIsApproachingThresholdLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "User session count is approaching threshold limit.
Report Type: oss, Report Num: 12,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Session Type = value; Session Maximum Limit = value;
Session Current Usage = value; Session Usage Percentagge = value."
REFERENCE ""
::= { ossTraps 12 }
futureUSERESERVEDForEMSSessionControl NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "FUTURE USE - RESERVED for EMS Session Control.
The user session usage has reached allowed limit
Report Type: oss, Report Num: 13,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Policy ID = value; Session Type = value;
User ID = value; User Domain = value;
Session Key = value."
REFERENCE ""
::= { ossTraps 13 }
userSessionCountExceedsMajorThresholdLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "User session count exceeds major threshold limit.
Report Type: oss, Report Num: 14,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Session Type = value; Session Maximum Limit = value;
Session Current Usage = value; Session Usage Percentage = value."
REFERENCE ""
::= { ossTraps 14 }
futureUSERESERVEDForEMSSessionControl2 NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "FUTURE USE - RESERVED for EMS Session Control.
The user session usage has reached critical allowed limit
Report Type: oss, Report Num: 15,
Severity: critical, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { ossTraps 15 }
sessionHasBeenRemovedBySessionControlPolicy NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Session has been removed by Session Control Policy.
Report Type: oss, Report Num: 16,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Policy ID = value; Session Type = value;
User ID = value; Session Key = value."
REFERENCE ""
::= { ossTraps 16 }
sessionHasBeenRemoved NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Session has been removed by.
Report Type: oss, Report Num: 17,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Session Type = value; User ID = value;
Session Key = value."
REFERENCE ""
::= { ossTraps 17 }
invalidSessionRequest NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid session request.
Report Type: oss, Report Num: 18,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
User ID = value; Session Key = value;
Request = value;"
REFERENCE ""
::= { ossTraps 18 }
interfaceIsActiveAndOperational NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Interface is active and operational.
Report Type: oss, Report Num: 19,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Session Type = value;"
REFERENCE ""
::= { ossTraps 19 }
interfaceIsNotStartedOrNotOperational NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Interface is not started or not operational.
Report Type: oss, Report Num: 20,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Session Type = value;"
REFERENCE ""
::= { ossTraps 20 }
resourceHasBeenReset NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Resource reset.
Report Type: oss, Report Num: 21,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Resource Type = value; Resource Instance = value."
REFERENCE ""
::= { ossTraps 21 }
onePeerInTheRealmIsOutOfContact NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "One peer in the realm is out of contact.
Report Type: oss, Report Num: 22,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Peer Name = value; Realm Name = value."
REFERENCE ""
::= { ossTraps 22 }
allPeersInTheRealmAreOutOfContact NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "All peers in the realm are out of contact.
Report Type: oss, Report Num: 23,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Realm Name = value."
REFERENCE ""
::= { ossTraps 23 }
userLoginSessionsHaveReachedUserSessionLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "User login sessions have reached User Session Limit.
Report Type: oss, Report Num: 24,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
User ID = value; Adapter Type = value;
Maximum Session Limit = value; Number of Denials = value."
REFERENCE ""
::= { ossTraps 24 }
eventKeepAliveChecked NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Event keep alive checked.
Report Type: oss, Report Num: 25,
Severity: info, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { ossTraps 25 }
invalidCredentialsPresentedByASIPPhone NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid credentials presented by a SIP phone.
Invalid credentials in SIP request
Report Type: security, Report Num: 2,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
authentication user name = value; From AOR = value;
SIP Request Type = value; Sender IP = value."
REFERENCE ""
::= { securityTraps 2 }
ipsecConnectionDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPSEC Connection Down.
Kms fails to establish the pf_key socket with the IPSec engine. Implies that the IPSec engine is not running and that it may not be installed
Report Type: security, Report Num: 3,
Severity: major, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { securityTraps 3 }
ipsecMTAKeyEstablishError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPSEC MTA Key Establish Error.
Failure to establish the IPSec keys to a given MTA using Kerberized key management protocol.
Report Type: security, Report Num: 4,
Severity: warning, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { securityTraps 4 }
ipsecOutgoingSANotFound NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPSEC Outgoing SA Not Found.
Kms receives SA-missing msgs from the IPSec engine and is unable to find a provisioned device to establish the needed SA.
Report Type: security, Report Num: 5,
Severity: warning, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { securityTraps 5 }
secureSIPEndpointValidationFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Secure SIP Endpoint Validation Failure.
Erroneous Provisioning in BTS.
Erroneous Provisioning in DNS.
Erroneous Provisioning in CPE.
Report Type: security, Report Num: 6,
Severity: warning, Threshhold: 100, Throttle: 0;
AOR = value; Secure Fqdn = value;
Source IP Address = value; Violation description = value."
REFERENCE ""
::= { securityTraps 6 }
authenticationBasedOnCredentialsFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Authentication Based On Credentials Failed.
Trunk group provided invalid credentials.
Report Type: security, Report Num: 7,
Severity: warning, Threshhold: 100, Throttle: 0;
Auth User = value; Auth Realm= value;
TGN-ID = value."
REFERENCE ""
::= { securityTraps 7 }
messageEncodingError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Message Encoding Error.
Issued when there is a message encoding error on sending an MGCP message.
Report Type: signaling, Report Num: 2,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Endpoint Name = value; Message Type = value;
Gateway Type = value."
REFERENCE ""
::= { signalingTraps 2 }
messageDecodingError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Message Decoding Error.
Issued when there is a message decoding error on receiving an MGCP message.
Report Type: signaling, Report Num: 3,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Endpoint Name = value; Gateway Type = value;
Message Type = value."
REFERENCE ""
::= { signalingTraps 3 }
invalidMessageReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid Message Received.
Issued when a signaling adapter has received an invalid message from the specified endpoint.
Report Type: signaling, Report Num: 4,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Endpoint Name = value; Message Type = value."
REFERENCE ""
::= { signalingTraps 4 }
databaseModuleFunctionCallFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Database Module Function Call Failure.
A signaling adapter has detected an error while accessing a database interface.
Report Type: signaling, Report Num: 6,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Endpoint Name = value; Return Code = value;
Function Name = value; Calling Function = value;
Index = value."
REFERENCE ""
::= { signalingTraps 6 }
socketFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Socket Failure.
Issued when there is a failure in creating/binding to the UDP socket.
Software logic problem.
Report Type: signaling, Report Num: 7,
Severity: major, Threshhold: 30, Throttle: 0;
The details contain syntax in the form:
Reason Text = value."
REFERENCE ""
::= { signalingTraps 7 }
sipMessageReceiveFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SIP Message Receive Failure.
Operating System level network errors or invalid network configuration.
Report Type: signaling, Report Num: 8,
Severity: major, Threshhold: 30, Throttle: 0;
The details contain syntax in the form:
Reason Text = value."
REFERENCE ""
::= { signalingTraps 8 }
timeoutOnIPAddress NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Timeout on IP Address.
Issued when OptiCall is unable to communicate with a gateway.
Report Type: signaling, Report Num: 9,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
MGW/Term Name = value; Gateway Type = value;
Possible Cause = value."
REFERENCE ""
::= { signalingTraps 9 }
failedToSendCompleteSIPMessage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Failed to send complete SIP message.
Notifies the user that the SIP stack failed to send an SIP message due to it exceeding the maximum length of a UDP packet.
Report Type: signaling, Report Num: 10,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Destination Address = value."
REFERENCE ""
::= { signalingTraps 10 }
failedToAllocateSIPControlBlock NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Failed to Allocate SIP Control Block.
Issued when there is not enough memory to allocate a SIP Call Control Block.
Report Type: signaling, Report Num: 11,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Size = value; Detail = value."
REFERENCE ""
::= { signalingTraps 11 }
featureServerIsNotUpOrIsNotRespondingToCallAgent NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Feature Server is not up or is not responding to Call Agent.
Feature server platform is down or is not operating properly
Report Type: signaling, Report Num: 12,
Severity: critical, Threshhold: 30, Throttle: 0;
The details contain syntax in the form:
Domain Name of FS = value; Feature Server ID = value."
REFERENCE ""
::= { signalingTraps 12 }
ss7SignalingLinkDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SS7 Signaling link down.
SS7 trunk group may be out-of-service (OOS).
The local Ulticom stack may be down
SS7 link may be disconnected or faulty
Remote SS7 signaling site may be down or incorrectly configured
Report Type: signaling, Report Num: 13,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
link_number = value; link_name = value."
REFERENCE ""
::= { signalingTraps 13 }
linkIsRemotelyInhibited NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Link is Remotely Inhibited.
Issued when the specified SS7 link is inhibited at the remote end.
Report Type: signaling, Report Num: 14,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Link = value; Link Name = value."
REFERENCE ""
::= { signalingTraps 14 }
linkIsLocallyInhibited NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Link is Locally Inhibited.
Issued when the specified SS7 link is inhibited at the local end.
Report Type: signaling, Report Num: 15,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Link No = value; Link Name = value."
REFERENCE ""
::= { signalingTraps 15 }
linkIsCongested NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Link is Congested.
Issued when the specified SS7 link is experiencing congestion.
Report Type: signaling, Report Num: 16,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Link No = value."
REFERENCE ""
::= { signalingTraps 16 }
linkLocalProcessorOutage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Link : Local Processor Outage.
Issued when the specified SS7 link has experienced a processor outage.
Report Type: signaling, Report Num: 17,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Link No = value; Link Name = value."
REFERENCE ""
::= { signalingTraps 17 }
linkRemoteProcessorOutage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Link : Remote Processor Outage.
Issued when the specified SS7 link has experienced a processor outage.
Report Type: signaling, Report Num: 18,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Link No = value; Link Name = value."
REFERENCE ""
::= { signalingTraps 18 }
linkSetInaccessible NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Link Set Inaccessible.
Issued when the specified SS7 link set is inaccessible.
Report Type: signaling, Report Num: 19,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Link Set No = value; Link Set Name = value."
REFERENCE ""
::= { signalingTraps 19 }
linkSetCongestion NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Link Set Congestion.
Issued when the specified SS7 link set is experiencing congestion.
Report Type: signaling, Report Num: 20,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Link Set No = value; Link Set Name = value;
Congestion Level = value."
REFERENCE ""
::= { signalingTraps 20 }
routeSetFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Route set Failure.
Issued when the specified route set has experienced a failure.
Report Type: signaling, Report Num: 21,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Route Set No = value; Route Set Name = value."
REFERENCE ""
::= { signalingTraps 21 }
routeSetCongested NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Route set congested.
Issued when the specified route set is experiencing congestion.
Report Type: signaling, Report Num: 22,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Route Set No = value; Route Set Name = value;
Congestion Level = value."
REFERENCE ""
::= { signalingTraps 22 }
dpcUnavailable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "DPC Unavailable.
Report Type: signaling, Report Num: 23,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
DPC = value."
REFERENCE ""
::= { signalingTraps 23 }
dpcCongested NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "DPC Congested.
Issued when the specified destination point code is congested.
Report Type: signaling, Report Num: 24,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
DPC = value; DPC Type = value;
Congestion Level = value."
REFERENCE ""
::= { signalingTraps 24 }
unansweredBLO NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered BLO.
Issued when a BLO message was not acknowledged before the T13 expired for the associated CIC.
Report Type: signaling, Report Num: 25,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 25 }
unansweredUBL NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered UBL.
Issued when a UBL message was not acknowledged before the T15 expired for the associated CIC.
Report Type: signaling, Report Num: 26,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 26 }
unansweredCGB NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered CGB.
Issued when a CGB message was not acknowledged before the T19 expired for the associated CIC.
Report Type: signaling, Report Num: 27,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 27 }
unansweredCGU NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered CGU.
Issued when a CGU message was not acknowledged before the T21 expired for the associated CIC.
Report Type: signaling, Report Num: 28,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 28 }
unansweredCQM NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered CQM.
Issued when a CQM message was not acknowledged before the T28 expired for the associated CIC.
Report Type: signaling, Report Num: 29,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 29 }
unansweredCVT NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered CVT.
Issued when a CVT message was not acknowledged before the Tcvt expired for the associated CIC.
Report Type: signaling, Report Num: 30,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 30 }
unansweredRSC NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered RSC.
Issued when a RSC message was not acknowledged before the T17 expired for the associated CIC.
Report Type: signaling, Report Num: 31,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 31 }
unansweredGRS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered GRS.
Issued when a GRS message was not acknowledged before the T23 expired for the associated CIC.
Report Type: signaling, Report Num: 32,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 32 }
unansweredREL NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered REL.
Issued when a REL message was not acknowledged before the T5 expired for the associated CIC.
Report Type: signaling, Report Num: 33,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 33 }
unansweredCCR NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered CCR.
Issued when an LPA message was not acknowledged before the Tccr expired for the associated CIC.
Report Type: signaling, Report Num: 34,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 34 }
trunkLocallyBlocked NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Trunk locally blocked.
Issued when a BLO or CGB message was sent on the specified CIC.
Report Type: signaling, Report Num: 36,
Severity: minor, Threshhold: 500, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value;
MGW-EP-NAME = value; MGW-TSAP-ADDR = value;
REASON = value."
REFERENCE ""
::= { signalingTraps 36 }
trunkRemotelyBlocked NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Trunk remotely blocked.
Issued when a BLO or CGB message was received on the specified CIC if it is SS7 trunk. Issued when SERVICE OOS message is received for ISDN trunks. Issued when Reverse Make Busy (rbz) signal received for CAS operator trunk.
Report Type: signaling, Report Num: 40,
Severity: major, Threshhold: 500, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value;
MGW-EP-NAME = value; MGW-TSAP-ADDR = value."
REFERENCE ""
::= { signalingTraps 40 }
cotMessageReceivedOnTheSpecifiedCIC NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "COT message received on the specified CIC.
Issued when a COT message was received on the specified CIC.
Report Type: signaling, Report Num: 42,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 42 }
rlcReceivedInResponseToRSCMessageOnTheSpecifiedCIC NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "RLC received in response to RSC message on the specified CIC.
Issued when a RLC message was received in response to a RSC message on the specified CIC.
Report Type: signaling, Report Num: 43,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 43 }
continuityRecheckIsPerformedOnSpecifiedCIC NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Continuity Recheck is performed on specified CIC.
Issued when a continuity recheck was performed on the specified CIC.
Report Type: signaling, Report Num: 44,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 44 }
circuitIsUNEQUIPPEDOnRemoteSide NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Circuit is UNEQUIPPED on Remote Side.
Issued when an unequipped circuit has been detected on the remote side.
Report Type: signaling, Report Num: 45,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 45 }
specifiedCICIsInvaildForTheOperation NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Specified CIC is Invaild for the operation.
Issued when an invalid operation was performed on the specified CIC.
Report Type: signaling, Report Num: 46,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 46 }
indicatedCircuitIsOutOfOrder NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Indicated Circuit is out of order.
Issued when the specified CIC is currently out of service.
Report Type: signaling, Report Num: 47,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value."
REFERENCE ""
::= { signalingTraps 47 }
indicatedCircuitIsBackInService NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Indicated Circuit is back in Service.
Issued when the specified CIC is restored to service.
Report Type: signaling, Report Num: 48,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value."
REFERENCE ""
::= { signalingTraps 48 }
aGeneralProcessingErrorEncountered NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "A general Processing Error encountered.
Issued when a general SS7 processing error occurred due to all resources being busy or an invalid event occurring.
Report Type: signaling, Report Num: 49,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 49 }
unexpectedMessageForTheCallStateIsReceivedClearCa NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unexpected Message for the Call State is received : Clear Ca.
Issued when an unexpected message was received for the current call state.
Report Type: signaling, Report Num: 50,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 50 }
setTrunkStateAsRemotlyUnequiped NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Set Trunk State as Remotly Unequiped.
Issued when the specified CIC is marked at remotely unequipped due to the CQM response indicating that it is unequipped at the far end.
Report Type: signaling, Report Num: 51,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 51 }
setTrunkStateAsNOTRemotlyBlocked NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Set Trunk State as NOT Remotly Blocked.
Issued when the specified CIC is marked as not remotely blocked due to the CQM response indicating that it is not remotely blocked at the far end.
Report Type: signaling, Report Num: 52,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 52 }
setTrunkStateAsRemotlyBlocked NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Set Trunk State as Remotly Blocked.
Issued when the specified CIC is marked as remotely blocked due to the CQM response indicating that it is remotely blocked at the far end.
Report Type: signaling, Report Num: 53,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 53 }
circuitValidationTestAborted NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Circuit Validation Test Aborted.
Issued when the circuit specified failed a validation test due to an internal failure.
Report Type: signaling, Report Num: 54,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 54 }
circuitValidationSuccessful NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Circuit Validation Successful.
Issued when the specified circuit was successfully validated.
Report Type: signaling, Report Num: 55,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 55 }
circuitValidationFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Circuit Validation Failure.
Issued when the specified circuit was unsuccessfully validated.
Report Type: signaling, Report Num: 56,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value."
REFERENCE ""
::= { signalingTraps 56 }
continuityRecheckFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Continuity Recheck Failed.
Issued when a continuity recheck of the specified CIC failed.
Report Type: signaling, Report Num: 57,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 57 }
continuityRecheckSuccessful NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Continuity Recheck Successful.
Issued when a continuity recheck of the specified CIC was successful.
Report Type: signaling, Report Num: 58,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 58 }
autoStateChangeForISDNTrunkGroupByMediaGateway NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Auto State Change for ISDN Trunk Group by Media Gateway.
Issued when the specified ISDN trunk groupÆs status was changed due to a media gateway operation.
Report Type: signaling, Report Num: 59,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group Id = value; Trunk Group Index = value;
Media Gateway Name = value; Media Gateway Index = value;
Service Status = value."
REFERENCE ""
::= { signalingTraps 59 }
isdnSTATUSMessageContainingErrorIndicationReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN STATUS Message containing error indication received.
Issued when an ISDN status message was received containing an error indication for the specified termination.
Report Type: signaling, Report Num: 60,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Termination Name = value; Termination Index = value;
Trunk Group Id = value; Trunk Group Index = value;
Cause Value = value; Call State = value."
REFERENCE ""
::= { signalingTraps 60 }
trunkOperationalStateChangedByServiceMessage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Trunk Operational State Changed by Service Message.
Issued when the specified trunk groupÆs operational status was changed via a service message from the specified gateway.
Report Type: signaling, Report Num: 61,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Termination Name = value; Termination Index = value;
Trunk Group Id = value; Trunk Group Index = value;
Service Status = value."
REFERENCE ""
::= { signalingTraps 61 }
receivedISDNRESTARTMessage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Received ISDN RESTART Message.
Issued when an ISDN restart message was received from the specified gateway.
Report Type: signaling, Report Num: 62,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Termination Name = value; Termination Index = value;
Trunk Group Id = value; Trunk Group Index = value;
Flag = value."
REFERENCE ""
::= { signalingTraps 62 }
mediaGatewayTerminationFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Media gateway/termination faulty.
Issued when a media gateway or termination has gone faulty due to the detection of an unknown endpoint, unknown package type, and unknown event, a hardware failure, or a general call agent error.
Report Type: signaling, Report Num: 63,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
fully qualified name = value; type of gateway(RGW, = value;
Reason for failure(u = value."
REFERENCE ""
::= { signalingTraps 63 }
mgaRunningOutOfSharedMemoryPools NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "MGA running out of shared memory pools.
Issued when the MGCP signaling adapter was unable to allocate data store for an IPC message due to a lack of resources.
Report Type: signaling, Report Num: 64,
Severity: critical, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { signalingTraps 64 }
mgaRunningOutOfHeapMemory NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "MGA running out of heap memory.
Issued when the MGCP signaling adapter was unable to allocate data store for an IPC message from the heap due to a lack of resources.
Report Type: signaling, Report Num: 65,
Severity: critical, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { signalingTraps 65 }
caInternalErrorBecauseOfWhichMGAHasToStartAutomat NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CA internal error (because of which MGA has to start automat.
Issued when a call agent internal error has occurred causing the restart of the MGCP signaling adapter.
Report Type: signaling, Report Num: 66,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Fully qualified name = value; reason = value;
detailed reason = value."
REFERENCE ""
::= { signalingTraps 66 }
gatewayTerminationReturningTransientErrorForTheMGCPM NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "gateway/termination returning transient error for the MGCP m.
Issued when a transient error is being returned from the specified media gateway.
Report Type: signaling, Report Num: 67,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
fully qualified name = value; transient error stri = value."
REFERENCE ""
::= { signalingTraps 67 }
mediaGatewayTerminationDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Trunking Gateway endpoints are out of service at GW.
This could have been caused by (1) The Trunking Gateway has been administratively taken OOS using command in GW (2) The Trunk Endpoint is alarmed/OOS state.
Report Type: signaling, Report Num: 68,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Fully qualified name = value; Type of mgw = value;
Failure Cause = value; Down Reason = value;
ICMP ping status = value."
REFERENCE ""
::= { signalingTraps 68 }
caAndFSCommunicationMessageTimeout NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CA and FS communication message timeout.
CA-FS communication failure due to wrong system configuration; -OR- CA or FS is down
Report Type: signaling, Report Num: 69,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Configured CA Name = value."
REFERENCE ""
::= { signalingTraps 69 }
isdnUnableToRestoreDChannelDueToFailedCommunication NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN Unable to restore D-channel due to failed communication.
The ISDN signaling adapter is unable to restore a D-channel due to incorrect backhaul provisioning at the media gateway or call agent.
Report Type: signaling, Report Num: 70,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
ISDN D-chan ID = value; ISDN D-chan Index = value."
REFERENCE ""
::= { signalingTraps 70 }
isdnUnableToEstablishDChannel NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN Unable to establish D-channel.
The ISDN signaling adapter is unable to establish a D-channel due to layer1 parameters not being provisioned correctly or improper provisioning of the network or user side.
Report Type: signaling, Report Num: 71,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group id = value; Trunk Group Index = value."
REFERENCE ""
::= { signalingTraps 71 }
isdnCallsLostDueToDChannelDownForPeriodOfTime NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN - Calls lost due to D-channel down for period of time.
The ISDN signaling adapter has lost calls due to a D-channel being down as a result of a media gateway power loss or a loss of connection between the PBX and media gateway.
Report Type: signaling, Report Num: 72,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group Id = value; Trunk Group Index = value."
REFERENCE ""
::= { signalingTraps 72 }
isdnUnableToSendRESTARTDueToRESTARTTimerExpired NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN - unable to send RESTART due to RESTART timer expired.
The ISDN signaling adapter was unable to send a RESTART message due to the expiration of the RESTART timer.
Report Type: signaling, Report Num: 73,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Termination Name = value; Termination Index = value;
Trunk Group ID = value; Trunk Group Index = value;
Restart Class = value."
REFERENCE ""
::= { signalingTraps 73 }
isdnUnableToSendTheSERVICEDueToTheSERVICETimerEx NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN: unable to send the SERVICE due to the SERVICE timer ex.
The ISDN signaling adapter was unable to send a SERVICE message due to the expiration of the SERVICE timer.
Report Type: signaling, Report Num: 74,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Termination Name = value; Termination Index = value;
Trunk Group ID = value; Trunk Group Index = value;
Service Status = value."
REFERENCE ""
::= { signalingTraps 74 }
ss7StackNotReady NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SS7 stack not ready.
SS7 stack not configured properly.
SS7 stack not ready.
Report Type: signaling, Report Num: 75,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
LogicalName = value."
REFERENCE ""
::= { signalingTraps 75 }
timeoutOnRemoteInstance NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Timeout on Remote Instance.
Communication between call agent and remote instance is faulty.
Report Type: signaling, Report Num: 76,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Port Number = value; Hostname = value."
REFERENCE ""
::= { signalingTraps 76 }
isdnDChannelSwitchoverForNFAS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN D-channel Switchover for NFAS.
Manually switched the D-channels using the CLI
Lost active D-channel
Report Type: signaling, Report Num: 77,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group Id = value; Trunk Group Index = value."
REFERENCE ""
::= { signalingTraps 77 }
isdnSingleDChannelDownForNFAS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN single D-channel down for NFAS.
One of the ISDN D-channels in PRI is down
Report Type: signaling, Report Num: 78,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group Id = value; Trunk Group Idx = value;
Is_Primary_D_Channel = value."
REFERENCE ""
::= { signalingTraps 78 }
generalMGCPSignalingErrorBetweenMGWAndCA NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Trunking Gateway Unreachable.
The Trunking Gateway is not responding to keep-alive AuditEndpoint messages.
Report Type: signaling, Report Num: 79,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Entity Name = value; General Context = value;
Specific Context = value; Failure Context = value."
REFERENCE ""
::= { signalingTraps 79 }
outOfBoundsMemorySocketError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Out of Bounds, Memory/Socket Error..
Out of Heap Memory
Out of IPC Pool Memory
Socket Error - Inappropriate/Already Bound Socket in Use.
Report Type: signaling, Report Num: 80,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Process Name = value; Description = value;
Extra Info = value."
REFERENCE ""
::= { signalingTraps 80 }
insufficientHeapMemory NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Insufficient heap memory.
Issued when H323 signaling adapter was unable to allocate memory from the system
Report Type: signaling, Report Num: 81,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value."
REFERENCE ""
::= { signalingTraps 81 }
insufficientSharedMemoryPools NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Insufficient shared memory pools.
Issued when H323 signaling adapter was unable to allocate storage
Report Type: signaling, Report Num: 82,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value."
REFERENCE ""
::= { signalingTraps 82 }
errorWhileBindingToSocket NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Error while binding to socket.
Report Type: signaling, Report Num: 83,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; socket_id = value;
local_tsap_address = value; reason_str = value."
REFERENCE ""
::= { signalingTraps 83 }
reachedMaximumSocketLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Reached maximum socket limit.
The configuration setting of an h3a parameter in platform.cfg is wrong.
Report Type: signaling, Report Num: 84,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; active_sockets = value."
REFERENCE ""
::= { signalingTraps 84 }
initializationFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Initialization failure.
Process initialization failure has occurred.
Report Type: signaling, Report Num: 85,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; reason_str = value."
REFERENCE ""
::= { signalingTraps 85 }
remoteH323GatewayIsNotReachable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Remote H323 gateway is not reachable.
Loss of communication with a remote gateway.
Report Type: signaling, Report Num: 86,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value."
REFERENCE ""
::= { signalingTraps 86 }
h323MessageParsingError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "H323 Message parsing error.
Unable to successfully parse an incoming H323 message.
Report Type: signaling, Report Num: 87,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value."
REFERENCE ""
::= { signalingTraps 87 }
h323MessageEncodingError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "H323 Message encoding error.
Unable to encode an H323 message for sending.
Report Type: signaling, Report Num: 88,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; reason_str = value."
REFERENCE ""
::= { signalingTraps 88 }
gatekeeperNotAvailableReachable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Gatekeeper not available/reachable.
Gatekeeper is not available or is unreachable.
Report Type: signaling, Report Num: 89,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; gatekeeper_id = value;
gk_tsap_addr = value."
REFERENCE ""
::= { signalingTraps 89 }
alternateGatekeeperIsNotResponding NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Alternate gatekeeper is not responding.
Alternate gatekeeper is not responding.
Report Type: signaling, Report Num: 90,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; gatekeeper_id = value;
gk_tsap_addr = value."
REFERENCE ""
::= { signalingTraps 90 }
endpointSecurityViolation NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Endpoint Security Violation.
An H323 security violation has occurred.
Report Type: signaling, Report Num: 91,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; gatekeeper_id = value;
gk_tsap_addr = value."
REFERENCE ""
::= { signalingTraps 91 }
invalidCallIdentifier NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid Call identifier.
The call id was invalid or changed mid-call.
Report Type: signaling, Report Num: 92,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value;
call_id = value."
REFERENCE ""
::= { signalingTraps 92 }
invalidCallReferenceValue NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid call reference value.
The call id was invalid or changed mid-call.
Report Type: signaling, Report Num: 93,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value;
call_id = value; call_ref_value = value."
REFERENCE ""
::= { signalingTraps 93 }
invalidConferenceIdentifier NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid conference identifier.
The call id was invalid or changed mid-call.
Report Type: signaling, Report Num: 94,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; reason_str = value;
remote_gw_port = value; call_id = value;
conference_id = value."
REFERENCE ""
::= { signalingTraps 94 }
invalidMessageFromTheNetwork NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid message from the network.
Unsupported or invalid message type received from network.
Report Type: signaling, Report Num: 95,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value;
call_id = value; conf_id = value;
call_ref_value = value."
REFERENCE ""
::= { signalingTraps 95 }
internalCallProcessingError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Internal call processing error.
A software error has occurred.
Report Type: signaling, Report Num: 96,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; call_id = value;
reason_str = value."
REFERENCE ""
::= { signalingTraps 96 }
insufficientInformationToCompleteCall NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Insufficient information to complete call.
Not enough initial call setup information was received to establish the call.
Report Type: signaling, Report Num: 97,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; call_id = value;
conf_id = value; call_ref_value = value."
REFERENCE ""
::= { signalingTraps 97 }
h323ProtocolInconsistencies NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "H323 protocol inconsistencies.
The H323 endpoint and BTS are running different protocol versions.
Report Type: signaling, Report Num: 98,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; call_id = value;
reason_str = value."
REFERENCE ""
::= { signalingTraps 98 }
abnormalCallClearing NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Abnormal call clearing.
Unsupported or invalid message type received from network.
Report Type: signaling, Report Num: 99,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; call_id = value;
reason_str = value."
REFERENCE ""
::= { signalingTraps 99 }
codecNegotiationFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Codec negotiation failed.
Codec negotiation failed.
Report Type: signaling, Report Num: 100,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; call_id = value;
reason_str = value."
REFERENCE ""
::= { signalingTraps 100 }
perCallSecurityViolation NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Per call security violation.
This is a future trap definition - it will not be issued in the 3.x release series.
Report Type: signaling, Report Num: 101,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; call_id = value;
gatekeeper_id = value."
REFERENCE ""
::= { signalingTraps 101 }
h323NetworkCongested NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "H323 network congested.
The H323 application processes has depleted it's resources . no more calls can be completed.
Report Type: signaling, Report Num: 102,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
gateway_id = value; gatekeeper_id = value."
REFERENCE ""
::= { signalingTraps 102 }
aggrConnectionDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "AGGR Connection Down.
TCP connection down.
Report Type: signaling, Report Num: 103,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
AGGR-ID = value."
REFERENCE ""
::= { signalingTraps 103 }
aggrUnableToEstablishConnection NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "AGGR Unable To Establish Connection.
TCP Connection Establish Failure
Report Type: signaling, Report Num: 104,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
AGGR-ID = value."
REFERENCE ""
::= { signalingTraps 104 }
aggrGateSetFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "AGGR Gate Set Failed.
Gate Set Ack Never came from CMTS
Report Type: signaling, Report Num: 105,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
AGGR-ID = value; ERROR-CODE = value;
SUB-ERROR-CODE = value;
SUBSCRIBER-IP-ADDR = value."
REFERENCE ""
::= { signalingTraps 105 }
esaBTSDFConnectionDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ESA BTS DF Connection Down.
DF Server Not responding
Report Type: signaling, Report Num: 106,
Severity: minor, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { signalingTraps 106 }
logicalIPAddressesNotMappedCorrectly NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Logical IP addresses not mapped correctly.
Contact name in the cfg file not configured in DNS.
Contact could not be resolved to an IP address on the host.
IP address manager not running.
Misconfiguration during installation or manual changes made after installation.
Report Type: signaling, Report Num: 107,
Severity: critical, Threshhold: 30, Throttle: 0;
The details contain syntax in the form:
Contact Domain Name = value; Number of IP Addresses resolved = value;
Number of virtual IP Addresses = value."
REFERENCE ""
::= { signalingTraps 107 }
simplexOnlyOperationalMode NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Simplex Only Operational Mode.
The -hostname parameter specified in platform.cfg (instead of -contact parameter)
Report Type: signaling, Report Num: 108,
Severity: major, Threshhold: 30, Throttle: 0;
The details contain syntax in the form:
Host Domain Name = value."
REFERENCE ""
::= { signalingTraps 108 }
sctpAssociationFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SCTP Association Failure.
Ethernet cables on SGP are unplugged or severed.
SGP is not operational.
Report Type: signaling, Report Num: 109,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
SCTP Association ID = value."
REFERENCE ""
::= { signalingTraps 109 }
signalingGatewayGroupIsOutOfService NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Signaling Gateway Group is out-of-service.
All SCTP Associations between CA and SGs are out-of-service.
The M3UA layer is down between the CA and SGs.
Report Type: signaling, Report Num: 110,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
SG Group ID = value."
REFERENCE ""
::= { signalingTraps 110 }
sctpAssociationDegradedOneOfTwoIPConnectionsDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SCTP Association Degraded (one of two IP connections down).
Single Ethernet connection on CA or SGP is unplugged or severed.
SCTP communication problem - protocol timeout.
Report Type: signaling, Report Num: 111,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
SCTP Association ID = value; Destination IP Address = value."
REFERENCE ""
::= { signalingTraps 111 }
sctpAssociationConfigurationError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SCTP Association Configuration Error.
Destination IP address is invalid
Local IP address is invalid
IP Routing Table is not configured properly.
Report Type: signaling, Report Num: 112,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
SCTP Association ID = value."
REFERENCE ""
::= { signalingTraps 112 }
signalingGatewayFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Signaling Gateway Failure.
All associated Signaling Gateway Processes are out-of-service.
Report Type: signaling, Report Num: 113,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Signaling Gateway ID = value."
REFERENCE ""
::= { signalingTraps 113 }
signalingGatewayProcessIsOutOfService NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Signaling Gateway Process is out-of-service.
All SCTP associations between the SGP and the CA are out-of-service.
The M3UA layer is down between the CA and SGP.
Report Type: signaling, Report Num: 114,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Signaling Gateway Pr = value."
REFERENCE ""
::= { signalingTraps 114 }
invalidRoutingContextReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid Routing Context Received.
routing context was configured improperly on CA or SG
Report Type: signaling, Report Num: 115,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
invalid routing cont = value; SG from which the in = value."
REFERENCE ""
::= { signalingTraps 115 }
dpcUserPartUnavailable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "DPC User Part Unavailable.
SGP sent a DUPU M3UA message to CA indicating that a User Part is unavailable on at a DPC.
Report Type: signaling, Report Num: 116,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
DPC ID = value."
REFERENCE ""
::= { signalingTraps 116 }
cvtMessageReceivedForAnUnequippedCIC NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CVT message received for an unequipped CIC.
cic not provisioned
Report Type: signaling, Report Num: 117,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
cic = value; tgn-id = value;
dpc = value."
REFERENCE ""
::= { signalingTraps 117 }
cvrReceivedWithFailedIndication NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "CVR received with failed indication.
cic mismatch
Report Type: signaling, Report Num: 118,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
cic = value; tgn-id = value;
dpc = value; OPC = value."
REFERENCE ""
::= { signalingTraps 118 }
s7aProcessFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "S7A process faulty.
OMNI or S7A exception
Report Type: signaling, Report Num: 119,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Reason = value."
REFERENCE ""
::= { signalingTraps 119 }
s7mS7aFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "S7M/S7A faulty.
OMNI failure
Report Type: signaling, Report Num: 120,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Reason = value."
REFERENCE ""
::= { signalingTraps 120 }
m3uaCannotGoStandby NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "M3UA Cannot Go Standby.
No INACTIVE ACK messages received from any Signaling Gateway - SG or SCTP Associations are probably down.
Report Type: signaling, Report Num: 121,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Platform ID = value."
REFERENCE ""
::= { signalingTraps 121 }
m3uaCannotGoActive NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "M3UA Cannot Go Active.
No ACTIVE ACK messages received from any Signaling Gateway - SG or SCTP Associations are probably down.
Report Type: signaling, Report Num: 122,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Platform ID = value."
REFERENCE ""
::= { signalingTraps 122 }
destinationPointCodeIsUnavailable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Destination Point Code is unavailable.
Link loss or DPC equipment out of service.
Report Type: signaling, Report Num: 123,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Destination Point Co = value."
REFERENCE ""
::= { signalingTraps 123 }
remoteSubsystemIsOutOfService NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Remote subsystem is out of service..
Link loss or the remote subsystem out of service.
Report Type: signaling, Report Num: 124,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Destination Point Co = value; Remote Subsystem Num = value."
REFERENCE ""
::= { signalingTraps 124 }
sccpRoutingError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SCCP routing error.
SCCP route invalid or not available.
Report Type: signaling, Report Num: 125,
Severity: major, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { signalingTraps 125 }
sccpBindingFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SCCP Binding Failure.
Trillium stack binding failure
Report Type: signaling, Report Num: 126,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local Point Code = value; Local Subsystem Numb = value."
REFERENCE ""
::= { signalingTraps 126 }
tcapBindingFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "TCAP Binding Failure.
Trillium stack binding failure
Report Type: signaling, Report Num: 127,
Severity: major, Threshhold: 100, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { signalingTraps 127 }
inapBindingFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "INAP Binding Failure.
Trillium stack binding failure
Report Type: signaling, Report Num: 128,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Local Point Code = value; Local Subsystem Numb = value."
REFERENCE ""
::= { signalingTraps 128 }
inapReachesTheProvisionedResourceLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "INAP reaches the provisioned resource limit..
INAP runs out of all the preconfigured dialogue ids or invoke ids.
Report Type: signaling, Report Num: 131,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Dialogue/Invoke ID = value."
REFERENCE ""
::= { signalingTraps 131 }
tcapReachesTheProvisionedResourceLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "TCAP reaches the provisioned resource limit..
TCAP runs out of all the preconfigured dialogue ids or invoke ids.
Report Type: signaling, Report Num: 132,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Dialogue/Invoke ID = value."
REFERENCE ""
::= { signalingTraps 132 }
unableToDecodeGTDMessage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unable to decode GTD message.
Issued when the GTD parser failed to decode a GTD message received from the specified endpoint.
null
Report Type: signaling, Report Num: 133,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Endpoint Name = value; GTD Content Type = value."
REFERENCE ""
::= { signalingTraps 133 }
ss7MessageEncodingFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SS7 Message Encoding Failure.
Error in ISUP stack or SAI message.
Report Type: signaling, Report Num: 134,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 134 }
ss7MessageDecodingFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SS7 Message Decoding Failure.
Error in ISUP stack or SAI message.
Report Type: signaling, Report Num: 135,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 135 }
ss7MessageInvalidReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SS7 Message Invalid Received.
Invalid message was recieved from line in ISUP stack.
Invalid message was recieved from line in ISUP stack.
Report Type: signaling, Report Num: 136,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 136 }
ss7ConfusionMessageReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SS7 Confusion Message Received.
An ISUP message or parameter received was not recognized or understood.
Report Type: signaling, Report Num: 137,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 137 }
numberOfOpenSIPConnectionsIsReachingEngineeredLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Number of open SIP connections is reaching engineered limit.
Call Failure/ Feature unavailability.
Report Type: signaling, Report Num: 138,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Number of SIP connections open = value; SIP connection alarm threshold = value;
Open SIP connection limit = value."
REFERENCE ""
::= { signalingTraps 138 }
ss7TrunkWasFoundToBeInErroneousState NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SS7 trunk was found to be in erroneous state.
Discrepency between local and remote trunk states.
Report Type: signaling, Report Num: 139,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC = value; TGN-ID = value;
DPC = value; OPC = value;
Near-End State = value; Far-End State = value;
Resolution Action = value."
REFERENCE ""
::= { signalingTraps 139 }
unansweredINFMessage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unanswered INF Message.
Far-end switch is not responding to INF message with an INR message.
Report Type: signaling, Report Num: 140,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
CIC = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { signalingTraps 140 }
addressNotResolvedByDNSServer NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Address not resolved by DNS server.
The tsap_address/hostname is not defined in DNS.
Report Type: signaling, Report Num: 141,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
tsap_address/hostname = value."
REFERENCE ""
::= { signalingTraps 141 }
sipTrunkOperationallyOutOfService NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SIP trunk operationally out of service.
Issued when BTS10200 is unable to communicate with a remote SIP party (Call-Agent or Proxy) over a SIP or SIP-T trunk
Remote SIP party is not operational
Report Type: signaling, Report Num: 142,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group Description = value; Trunk TSAP Address = value."
REFERENCE ""
::= { signalingTraps 142 }
ipInterfaceLinkToTheSS7SignalingGatewayIsDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IP interface link to the SS7 signaling gateway is down.
Hardware Problem
Report Type: signaling, Report Num: 143,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface Name = value; Interface IP Address = value."
REFERENCE ""
::= { signalingTraps 143 }
allIPInterfaceLinksToSS7SignalingGatewayAreDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "All IP Interface links to SS7 signaling gateway are down.
Hardware Problem.
Report Type: signaling, Report Num: 144,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface Name = value; Interface IP Address = value;
Interface Name = value; Interface IP Address = value."
REFERENCE ""
::= { signalingTraps 144 }
oneIPInterfaceToSS7SignalingGatewayIsDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "One IP interface to SS7 signaling gateway is down.
Hardware Problem.
Report Type: signaling, Report Num: 145,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Interface Name = value; Interface IP Address = value."
REFERENCE ""
::= { signalingTraps 145 }
allRetransmissionAttemptsOfSIPRequestOrResponseFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "All retransmission attempts of SIP request or response failed.
SIP Request: All retransmission attempts for a SIP Request failed for DNS or IP Address of Request URI. SIP Response: All retransmission attempts for a SIP response failed for received socket IP Address of Request and DNS(or IP address) of Via Header.
Report Type: signaling, Report Num: 146,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
SIP Request Type = value; Sender IP = value."
REFERENCE ""
::= { signalingTraps 146 }
dnsSRVAddressesExhausted NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "DNS SRV Addresses Exhausted.
DNS SRV hostname resolution to IP address exhausted.
Remote SIP party is not operational
Report Type: signaling, Report Num: 147,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
SRV Hostname = value."
REFERENCE ""
::= { signalingTraps 147 }
softswitchAuditReleasedStaleMemory NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Softswitch Audit Released Stale Memory.
Loss of communication with originating or terminating side.
Adjacent network device protocol error.
Internal Software Error.
Report Type: signaling, Report Num: 148,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Stale Memory Release Info = value."
REFERENCE ""
::= { signalingTraps 148 }
softswitchAuditDeterminedTableCorruptionInSharedMemory NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Softswitch Audit determines Table corruption in shared memory.
Softswitch shared memory data corruption.
Software Error.
Report Type: signaling, Report Num: 149,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Table Name = value."
REFERENCE ""
::= { signalingTraps 149 }
sctpAssociationCongested NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SCTP Association Congested.
Network is congested -or-
CPU is throttled.
Report Type: signaling, Report Num: 150,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
SCTP Association ID = value; Congestion Level = value."
REFERENCE ""
::= { signalingTraps 150 }
subscriberLineFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Subscriber Line faulty.
The Residential Gateway returned error code in response to command from MGW
Report Type: signaling, Report Num: 151,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
End Point /Termination = value; Media Gateway Type = value;
Error Details = value."
REFERENCE ""
::= { signalingTraps 151 }
terminationTransientErrorReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Termination Transient Error Received.
MGCP Signaling Interop Errors
Report Type: signaling, Report Num: 152,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Entity Name = value; General Context = value;
Specifc Context = value; Failure Context = value."
REFERENCE ""
::= { signalingTraps 152 }
emergencyTrunksBecomesLocallyBlocked NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Emergency trunks becomes locally blocked.
Report Type: signaling, Report Num: 153,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 153 }
emergencyTrunksBecomesRemotelyBlocked NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Emergency trunks becomes remotely blocked.
Report Type: signaling, Report Num: 154,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 154 }
pcmmUnsolicitedGateDelete NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "PCMM Unsolicited Gate Delete.
Report Type: signaling, Report Num: 155,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 155 }
isdnSignalingGatewayDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN Signaling Gateway Down.
Report Type: signaling, Report Num: 156,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 156 }
isdnSignalingGatewayInactive NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN Signaling Gateway Inactive.
Report Type: signaling, Report Num: 157,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 157 }
invalidIsdnInterfaceID NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Invalid ISDN Interface ID .
Report Type: signaling, Report Num: 158,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 158 }
iuaCanNotGoActive NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IUA can not go active .
Report Type: signaling, Report Num: 159,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 159 }
iuaCanNotGoStandby NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IUA can not go standby .
Report Type: signaling, Report Num: 160,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 160 }
sipUpdateNotAllowedForOspsCalls NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SIP UPDATE NOT ALLOWED FOR OSPS CALLS .
Report Type: signaling, Report Num: 161,
Severity: warning, Threshhold: 5, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 161 }
sipElementIsOperationallyOutOfService NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SIP Element is operationally out of service.
Report Type: signaling, Report Num: 162,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 162 }
routingKeyInactive NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Routing Key Inactive .
Report Type: signaling, Report Num: 163,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 163 }
signalingGatewayTrafficModeMismatch NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Signaling Gateway traffic mode mismatch .
Report Type: signaling, Report Num: 164,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 164 }
noSipPDcsBillingInfoHdrRcvd NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "No SIP P DCS Billing Info Hdr Rcvd .
Report Type: signaling, Report Num: 165,
Severity: warning, Threshhold: 10, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 165 }
noROUTINGKEYSAREACTIVE NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "NO ROUTING KEYS ARE ACTIVE.
Routing Keys NOT controlled into ACTIVE state
ITP provisioning INCORRECT
Report Type: signaling, Report Num: 166,
Severity: warning, Threshhold: 0, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { signalingTraps 166 }
noSIGNALINGGATEWAYSACTIVE NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "NO SIGNALING GATEWAYS ACTIVE.
Communication problem between ITP and the BTS10200
Report Type: signaling, Report Num: 167,
Severity: warning, Threshhold: 0, Throttle: 0;
There are no details associated."
REFERENCE ""
::= { signalingTraps 167 }
aSipServerGroupHasNoChildElementsProvisioned NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "A SIP Server Group has no child elements provisioned .
Report Type: signaling, Report Num: 168,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 168 }
sipElementProvisionedWithSrvEnabledIsInternallyDisabled NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "SIP Element provisioned with SRV enabled is internally disabled.
Report Type: signaling, Report Num: 169,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 169 }
residentialGatewayEndpointsAreOutOfServiceAtGW NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Residential Gateway endpoints are out of service at GW.
This could have been caused by the Residential Gateway has been administratively taken OOS using command in GW.
Report Type: signaling, Report Num: 170,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Fully qualified name = value; Type of mgw = value;
Failure Cause = value; Subscriber Info = value;
ICMP ping status = value."
REFERENCE ""
::= { signalingTraps 170 }
residentialGatewayUncreachable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Residential Gateway Unreachable.
MGCP signaling interop error with Residential Gateway.
Report Type: signaling, Report Num: 171,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Entity Name = value; General Context = value;
Specific Context = value; Failure Context = value."
REFERENCE ""
::= { signalingTraps 171 }
mtaEffectAggrIdBecomesUnavailableDueToIpAddressChange NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "MTA Effect-Aggr-Id becomes unavailable due to IP Address change.
Report Type: signaling, Report Num: 172,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
MTA IP Address = value."
REFERENCE ""
::= { signalingTraps 172 }
enumServerDomainCannotBeResolvedIntoAnyIpAddress NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ENUM server domain cannot be resolved into any IP address.
Report Type: signaling, Report Num: 173,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
ENUM server domain = value; ENUM profile ID = value."
REFERENCE ""
::= { signalingTraps 173 }
enumServerUnavailable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ENUM server unavailable.
Report Type: signaling, Report Num: 174,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
ENUM server IP address = value;
ENUM server farm name = value;
ENUM profile ID = value."
REFERENCE ""
::= { signalingTraps 174 }
enumServerFarmUnavailable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ENUM server farm unavailable.
Report Type: signaling, Report Num: 175,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
ENUM server farm name = value;
ENUM profile ID = value."
REFERENCE ""
::= { signalingTraps 175 }
noResourcesAvailableToLaunchEnumQuery NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "No resources available to launch ENUM query.
Report Type: signaling, Report Num: 176,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { signalingTraps 176 }
isdnUnableToBringDChannelIntoInServiceActiveState NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "ISDN unable to bring D-channel into In-Service active state.
Report Type: signaling, Report Num: 177,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
D-Chan ID = value; D-Chan Index = value;
D-Chan Type = value."
REFERENCE ""
::= { signalingTraps 177 }
possibleOverlapDialingMisconfiguration NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Possible Overlap Dialing misconfiguration.
Report Type: signaling, Report Num: 178,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
TGN ID = value; Dialed Digit = value."
REFERENCE ""
::= { signalingTraps 178 }
trunkGroupRegistrationExpired NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Trunk Group Registration Expired.
The trunk group did not register in time before the contact expiry.
Report Type: signaling, Report Num: 179,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
TGN-ID = value; SIP Reg Contact = value;
Reg Expiry = value."
REFERENCE ""
::= { signalingTraps 179 }
serverAssignmentRequestTimeout NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Server assignment request timeout.
Report Type: signaling, Report Num: 180,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Server Assignment Type = value; Public ID = value."
REFERENCE ""
::= { signalingTraps 180 }
networkDeregistrationOccurred NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Network deregistration occurred.
Report Type: signaling, Report Num: 181,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Type of Deregistration = value; Public ID= value;
Contact = value."
REFERENCE ""
::= { signalingTraps 181 }
callAgentMeasurementCollectionStarted NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call Agent Measurement Collection Started.
Report Type: statistics, Report Num: 2,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Start Time = value."
REFERENCE ""
::= { statisticsTraps 2 }
callAgentMeasurementCollectionFinished NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Call Agent Measurement Collection Finished.
Report Type: statistics, Report Num: 3,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
End Time = value."
REFERENCE ""
::= { statisticsTraps 3 }
potsCtxTdmFeatureServerMeasurementCollectionStarted NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "POTS/CTX/TDM Feature Server Measurement Collection Started.
Report Type: statistics, Report Num: 4,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Start Time = value."
REFERENCE ""
::= { statisticsTraps 4 }
potsCtxTdmFeatureServerMeasurementCollectionFinished NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "POTS/CTX/TDM Feature Server Measurement Collection Finished.
Report Type: statistics, Report Num: 5,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
End Time = value."
REFERENCE ""
::= { statisticsTraps 5 }
ainFeatureServerMeasurementCollectionStarted NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "AIN Feature Server Measurement Collection Started.
Report Type: statistics, Report Num: 6,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Start Time = value."
REFERENCE ""
::= { statisticsTraps 6 }
ainFeatureServerMeasurementCollectionFinished NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "AIN Feature Server Measurement Collection Finished.
Report Type: statistics, Report Num: 7,
Severity: info, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
End Time = value."
REFERENCE ""
::= { statisticsTraps 7 }
messageSendFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Message Send Failure.
Originating process (for CA, FS or EMS) is not in active state, or is shut down
HUB is down
Platform is currently shutting down a process
Report Type: statistics, Report Num: 8,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Originating Process = value; Traffic Mgr Msg Type = value;
Traffic Agent Msg Ty = value."
REFERENCE ""
::= { statisticsTraps 8 }
measurementTableSQLReadError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Measurement Table SQL Read Error.
There is no database connection, or the connection is faulty
Traffic measurement table(s) are corrupted
Two processors or more are attempting to access the table at the same time.
Report Type: statistics, Report Num: 9,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Measurement Table Na = value."
REFERENCE ""
::= { statisticsTraps 9 }
measurementTableSQLWriteError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Measurement Table SQL Write Error.
There is no database connection, or the connection is faulty
Traffic measurement table(s) are corrupted
Two processors or more are attempting to access the table at the same time.
Report Type: statistics, Report Num: 10,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Measurement Table Na = value."
REFERENCE ""
::= { statisticsTraps 10 }
measurementCollectionAPIFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Measurement Collection API Failure.
This report is issued when the traffic measurement subsystem on the call agent or feature server encounters difficulties when it tries to collect measurement values from one of the processes. This could be due to:
Originating process (for CA, FS or EMS) is not in active state, or is shut down
Platform is currently shutting down the originating process
Report Type: statistics, Report Num: 11,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Message Type = value; Platform Type = value."
REFERENCE ""
::= { statisticsTraps 11 }
measurementHandshakeErrorSchemaInconsistency NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Measurement Handshake Error - Schema Inconsistency.
Counters added/deleted from schema in Oracle but not in the Call Agent.
Load installed incorrectly.
Report Type: statistics, Report Num: 12,
Severity: major, Threshhold: 5, Throttle: 0;
The details contain syntax in the form:
Schemas Out of Syncronization = value."
REFERENCE ""
::= { statisticsTraps 12 }
tmmAPIFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "tmm API failure.
Unable to initialize shared memory
Unable to attach to shared memory
Shared memory table overflow
Shared memory exhaustion
Report Type: statistics, Report Num: 13,
Severity: major, Threshhold: 1, Throttle: 10;
The details contain syntax in the form:
TMM error = value."
REFERENCE ""
::= { statisticsTraps 13 }
mdiiTrunk NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "MDII Trunk.
Report Type: statistics, Report Num: 14,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group = value; CIC = value;
Reason = value."
REFERENCE ""
::= { statisticsTraps 14 }
threshodCrossingAlert NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Threshod Crossing Alert.
Report Type: statistics, Report Num: 15,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
"
REFERENCE ""
::= { statisticsTraps 15 }
trunkGroupHasReachedMDIIAlarmThreshold NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Trunk group has reached MDII alarm threshold
Report Type: statistics, Report Num: 16,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Trunk Group = value."
REFERENCE ""
::= { statisticsTraps 16 }
ipcQueueReadFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPC queue read failure.
There is a problem with IPC communication.
Report Type: system, Report Num: 2,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Queue name = value; Location tag = value."
REFERENCE ""
::= { systemTraps 2 }
ipcMessageAllocateFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPC message allocate failure.
There is a system error, or there is not enough free memory left to allocate a message buffer.
Report Type: system, Report Num: 3,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Requested size = value; Error code = value;
Location tag = value."
REFERENCE ""
::= { systemTraps 3 }
ipcMessageSendFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IPC message send failure.
The process for which the message is intended is not running.
Internal error.
Report Type: system, Report Num: 4,
Severity: minor, Threshhold: 50, Throttle: 0;
The details contain syntax in the form:
Error code = value; Destination process = value;
Message number = value; Location tag = value."
REFERENCE ""
::= { systemTraps 4 }
unexpectedIPCMessageReceived NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Unexpected IPC message received.
The process reporting the event is receiving messages it is not expecting.
Report Type: system, Report Num: 5,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Source process type = value; Source thread type = value;
Message number = value; Location tag = value."
REFERENCE ""
::= { systemTraps 5 }
idxListInsertError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IDX list insert error.
Internal error.
Report Type: system, Report Num: 6,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
List name = value; Index of entry being = value;
Location tag = value."
REFERENCE ""
::= { systemTraps 6 }
idxListRemoveError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IDX list remove error.
Internal error.
Report Type: system, Report Num: 7,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
List name = value; Index of entry being = value;
Location tag = value."
REFERENCE ""
::= { systemTraps 7 }
threadCreationFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Thread creation failure.
Internal error-a process was unable to create one of its threads.
Report Type: system, Report Num: 8,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Error code = value; Thread name = value;
Location tag = value."
REFERENCE ""
::= { systemTraps 8 }
timerStartFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Timer start failure.
Process was unable to start a platform timer.
Report Type: system, Report Num: 9,
Severity: warning, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Timer type = value; Location tag = value."
REFERENCE ""
::= { systemTraps 9 }
idxUpdateRegistrationError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IDX update registration error.
Application unsuccessfully requested to be notified of table changes.
Report Type: system, Report Num: 10,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Error code = value; Table name = value;
Location tag = value."
REFERENCE ""
::= { systemTraps 10 }
idxTableAddEntryError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "IDX table add-entry error.
Internal error.
Report Type: system, Report Num: 11,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Table name = value; Index of entry being = value;
Error code = value; Location tag = value."
REFERENCE ""
::= { systemTraps 11 }
softwareError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "Software Error.
Logic path is not handled by algorithm in code
Report Type: system, Report Num: 12,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Context Description = value; FileName = value;
Line Number of code = value; Error specific Information = value."
REFERENCE ""
::= { systemTraps 12 }
mrmwMaxQDepthReached NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "MRMW Max Q depth reached.
Message flooding from misbehaved network element.
Resource congestion / Slow processing of messages from queue.
Report Type: system, Report Num: 13,
Severity: critical, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
High Mark for Queue Depth = value; Low Mark for Queue Depth = value."
REFERENCE ""
::= { systemTraps 13 }
mrmwQueueReachedLowQueueDepth NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "MRMW Queue reached low queue depth.
High Rate of messages from network.
System or processing thread congestion.
Report Type: system, Report Num: 14,
Severity: minor, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Lower Queue depth limit = value; Higher Queue depth limit = value."
REFERENCE ""
::= { systemTraps 14 }
mrmwThrottleQDepthReached NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS current
DESCRIPTION "MRMW Throttle Q depth reached.
Inbound network messages arriving at a rate much higher than processing capacity.
Resource congestion resulting in a slow down in processing messages from queue
Report Type: system, Report Num: 15,
Severity: major, Threshhold: 100, Throttle: 0;
The details contain syntax in the form:
Throttle Mark for Queue Depth = value; Throttle Clear Mark for Queue De = value."
REFERENCE ""
::= { systemTraps 15 }
--
-- End of Current Trap Definitions
--
--
-- Start of Obsoleted Trap Definitions
--
alarmEvent NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Notification of general undefined alarms that are
raised. This shows which subsystem the alarm occurred,
what serverity level, the alarm ID number, the
component ID, the component Type, and the details in
the dataword field. The dataword field contains syntax
in the form of:
key1 = value1; key2 = value2; ...; key8 = value8."
REFERENCE ""
::= { generalTraps 4 }
billingPartDiskUsageMinor NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Billing Partition Disk Usage Minor Threshhold Exceeded.
Call detail records are accumulating on the disk
associated with the billing database in the EMS. This
is because data is being written into the database
faster than it is being read out of the database. The
minor threshold (default value=70%) has been exceeded.
Threshhold: 100, Throttle: 0; Report Index: 2,
Category: billing, Level: minor;
The details contains syntax in the form of:
Disk Usage Percentage = value."
REFERENCE ""
::= { emsTraps 1 }
billingPartDiskUsageMajor NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Billing Partition Disk Usage Major Threshhold Exceeded.
Call detail records are accumulating on the disk
associated with the billing database in the EMS. This
is because data is being written into the database
faster than it is being read out of the database. The
major threshold (default value=80%) has been exceeded.
Threshhold: 100, Throttle: 0; Report Index: 3,
Category: billing, Level: major;
The details contains syntax in the form of:
Disk Usage Percentage = value."
REFERENCE ""
::= { emsTraps 2 }
billingPartDiskUsageCritical NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Billing Partition Disk Usage Critical Threshhold
Exceeded.
Call detail records are accumulating on the disk
associated with the billing database in the EMS. This
is because data is being written into the database
faster than it is being read out of the database. The
critical threshold (default value=90%) has been
exceeded.
Threshhold: 100, Throttle: 0; Report Index: 4,
Category: billing, Level: critical;
The details contains syntax in the form of:
Disk Usage Percentage = value."
REFERENCE ""
::= { emsTraps 3 }
failedToMakeFTPTransfer NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Billing Failed to make ftp transfer.
If the FTP information has not been initialized, -or-
If the FTP information in the OptiCall database is
does not match the remote billing server -or- Login
user-name (for billing server) is missing or incorrect
in the Softswitch database, or user-name does not have
privilege to write to specified directory -or-
Password password (for billing server) is missing or
incorrect in the Softswitch database. Connection
billing-server-addr (IP address/domain name of billing
server) is missing or incorrect in the Softswitch
database, or connection to the billing server is
unavailable. Repository billing-server-directory
identifier is missing or incorrect in the OptiCall
database, or directory is not available on billing
server.
Threshhold: 100, Throttle: 0; Report Index: 6,
Category: billing, Level: major;
The details contains syntax in the form of:
FileName = value; FTPAddress = value;
Error = value."
REFERENCE ""
::= { emsTraps 4 }
localSideGoingToFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Local Side Going to Faulty State.
Can result from maintenance report 5, 6, 9, 10, 19, 20.
(or)
Manually shutting down the system using platform stop
command.
Threshhold: 100, Throttle: 0; Report Index: 3,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Local State = value; Mate State = value;
Reason = value; Probable Cause = value."
REFERENCE ""
::= { emsTraps 6 }
mateSideGoingToFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Mate Side Going to Faulty State.
Local side has detected the mate side going to faulty
state.
Threshhold: 100, Throttle: 0; Report Index: 4,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Local State = value; Mate State = value;
Reason = value; Probable Cause = value;
Mate Ping = value."
REFERENCE ""
::= { emsTraps 7 }
changeOverFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Changeover Failure.
Issued when changing from active to standby or
standby to active and the changeover fails.
(or)
This alarm is usually caused by a software problem on
the specific platform identified in the alarm report.
Threshhold: 100, Throttle: 0; Report Index: 5,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Local State = value; Mate State = value."
REFERENCE ""
::= { emsTraps 8 }
changeOverTimeout NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Changeover Timeout.
System failed to changeover within time period. Soon
after this event is issued, one platform will go to
faulty state.
(or)
This alarm is usually caused by a software problem on
the specific platform identified in the alarm report.
Threshhold: 100, Throttle: 0; Report Index: 6,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Local State = value; Mate State = value."
REFERENCE ""
::= { emsTraps 9 }
mateRejectedChangeOver NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Mate Rejected Changeover.
Mate is not yet in stable state.
(or)
Mate detects itself faulty during changeover and then
rejects changeover.
Threshhold: 100, Throttle: 0; Report Index: 7,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Local State = value; Mate State = value."
REFERENCE ""
::= { emsTraps 10 }
mateChangeOverTimeout NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Mate Changeover Timeout.
Faulty mate.
Threshhold: 100, Throttle: 0; Report Index: 8,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Local State = value; Mate State = value."
REFERENCE ""
::= { emsTraps 11 }
localInitFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Local Init Failure.
Bring up failed due to processes failing to
come up - see additional maintenance alarms that were
issued indicating detailed cause
Threshhold: 100, Throttle: 0; Report Index: 9,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Local State = value; Mate State = value."
REFERENCE ""
::= { emsTraps 12 }
localInitTimeout NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Local Init Timeout.
Local initialization has timed out.
(or)
When the event report is issued, the system has
failed and the re-initialization process has failed.
Threshhold: 100, Throttle: 0; Report Index: 10,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Local State = value; Mate State = value."
REFERENCE ""
::= { emsTraps 13 }
initSuccessful NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Init Successful.
Initiates a local initialization that is successful.
Threshhold: 100, Throttle: 0; Report Index: 12,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Local State = value; Mate State = value."
REFERENCE ""
::= { emsTraps 15 }
adminStateChangeOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Admin State Change.
The administrative state of a managed resource has
changed.
Threshhold: 100, Throttle: 0; Report Index: 13,
Category: maintenance, Level: minor;
The details contains syntax in the form of:
Facility Type = value; Facility Id = value;
Initial Admin State = value; Target Admin State = value;
Current Admin State = value."
REFERENCE ""
::= { emsTraps 16 }
undefinedVariableInKnowSet NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Undefined Variable in Known Set.
There was no definition of a data column that could be
found in the database.
Threshhold: 100, Throttle: 0; Report Index: 2,
Category: oss, Level: major;
The details contains syntax in the form of:
Module Name = value; Field Name = value;
Field Value = value."
REFERENCE ""
::= { emsTraps 17 }
undefinedDataColumnID NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Undefined Data Column ID.
The database does not contain the required data
column that was requested via the SNMP interface.
Threshhold: 100, Throttle: 0; Report Index: 3,
Category: oss, Level: major;
The details contains syntax in the form of:
Noun = value; Column ID = value."
REFERENCE ""
::= { emsTraps 18 }
requestHandlerInstantiationErrorOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Request Handler Instantiation Error.
Resource limitation has prevented the creation of this
object. This may come from a lack of memory or Class
Path problem.
Threshhold: 100, Throttle: 0; Report Index: 4,
Category: oss, Level: major;
The details contains syntax in the form of:
User name = value; Host = value;
Subsystem = value."
REFERENCE ""
::= { emsTraps 19 }
sqlErrorGettingStatistics NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SQL error while getting statistics.
An error occurred in accessing the SQL database for
statistical information in the SNMP subsystem. This
may result from schema error.
Threshhold: 100, Throttle: 0; Report Index: 5,
Category: oss, Level: minor;
The details contains syntax in the form of:
Statistics Category = value."
REFERENCE ""
::= { emsTraps 20 }
sqlErrorConnectionError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SQL connection error.
The connection to the database timed out or the
database server is not running. This is generated in
the SNMP subsystem.
Threshhold: 100, Throttle: 0; Report Index: 6,
Category: oss, Level: major;
The details contains syntax in the form of:
Error Exception = value."
REFERENCE ""
::= { emsTraps 21 }
alarmProcessHasDied NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Alarm Process has Died.
Software problem. If it happens often, may be followed
by MAINTNANCE #19.
Threshhold: 100, Throttle: 0; Report Index: 18,
Category: maintenance, Level: minor;
The details contains syntax in the form of:
Process Name = value; Process Group = value"
REFERENCE ""
::= { emsTraps 47 }
processExceededRestartRate NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Process Exceeded Restart Rate.
This alarm is usually caused by a software problem on
the specific side identified in the alarm report. Soon
after this event is issued, one side will go to faulty
state.
Threshhold: 100, Throttle: 0; Report Index: 19,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Process Name = value; Restart Rate = value;
Process Group = value"
REFERENCE ""
::= { emsTraps 48 }
noReplyRcvFromDestination NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "No Reply Received From Destination.
Received when there is no response to a CLI command
from the Call Agent platform.
Threshhold: 100, Throttle: 5; Report Index: 8,
Category: oss, Level: minor;
The details contains syntax in the form of:
Queue Name = value"
REFERENCE ""
::= { emsTraps 49 }
billingTCPConnectionFail NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Failed to make a tcp connection.
System call error.
(or)
Not connected to the right address.
Threshhold: 100, Throttle: 0; Report Index: 7,
Category: billing, Level: critical;
The details contains syntax in the form of:
Hostname = value."
REFERENCE ""
::= { emsTraps 61 }
billingTCPPacketRecvFail NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Failed to recv tcp packets.
Peer went down; Socket closed.
Threshhold: 100, Throttle: 0; Report Index: 8,
Category: billing, Level: major;
The details contains syntax in the form of:
Hostname = value."
REFERENCE ""
::= { emsTraps 62 }
billingFileWriteError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Error in writing to file.
System error, may be out of file descriptors.
Threshhold: 100, Throttle: 0; Report Index: 15,
Category: billing, Level: major;
The details contains syntax in the form of:
Pathname = value."
REFERENCE ""
::= { emsTraps 63 }
billingSharedMemoryAddFail
NOTIFICATION-TYPE OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Error in adding to shared memory.
Out of allocated shared memory space.
Threshhold: 100, Throttle: 0; Report Index: 17,
Category: billing, Level: minor;
The details contains no parameters."
REFERENCE ""
::= { emsTraps 64 }
billingCDBWriteError
NOTIFICATION-TYPE OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Error in writing cdbs to disk.
SQL server is down.
(or)
Query is wrong; software error.
Threshhold: 100, Throttle: 0; Report Index: 19,
Category: billing, Level: minor;
The details contain no parameters."
REFERENCE ""
::= { emsTraps 65 }
billingCDBReadError
NOTIFICATION-TYPE OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Error in reading cdbs from disk.
SQL server is down.
(or)
Query is wrong; software error.
Threshhold: 100, Throttle: 0; Report Index: 20,
Category: billing, Level: minor;
The details contain no parameters."
REFERENCE ""
::= { emsTraps 66 }
lostKAMConToMate NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Lost KAM connection to mate.
Network interface hardware problem.
(or)
Router problem.
(or)
Soon after this event is issued, one side may go to
faulty state.
Threshhold: 100, Throttle: 0; Report Index: 20,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Mate Ping = value; "
REFERENCE ""
::= { emsTraps 67 }
netIFDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "KAM: Network interface down.
Network interface hardware problem.
(or)
If these alarms are issued on multiple interfaces, the
side may go to a faulty state.
(or)
Ethernet link failure.
Threshhold: 100, Throttle: 0; Report Index: 21,
Category: maintenance, Level: major;
The details contains syntax in the form of:
IP Address = value;"
REFERENCE ""
::= { emsTraps 68 }
procFailedCompleteInit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Process Failed to Complete Initialization.
The specified process failed to complete
initialization during bring up.
Threshhold: 100, Throttle: 0; Report Index: 23,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Process Name = value; Process Group = value"
REFERENCE ""
::= { emsTraps 71 }
restartingProc NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Restarting Process.
The specified process is being restarted after having
experienced a failure.
Threshhold: 100, Throttle: 0; Report Index: 24,
Category: maintenance, Level: minor;
The details contains syntax in the form of:
Process Name = value; Restart Type = value;
Restart Mode = value; Process Group = value"
REFERENCE ""
::= { emsTraps 72 }
pmgGoingFaultyOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "PMG: Going Faulty.
A side is changing state to faulty due to the failure
of one or more component processes.
Threshhold: 100, Throttle: 0; Report Index: 26,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Reason = value;"
REFERENCE ""
::= { emsTraps 73 }
billingSharedMemUpdateFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Shared Memory Update failed for billing.
EMS could possibly be down causing full shared memory.
(or)
High Call Volume of more than 200 calls per second.
Threshhold: 100, Throttle: 0; Report Index: 26,
Category: billing, Level: major;
The details contains syntax in the form of:
Reason = value; EntryNumber = value"
REFERENCE ""
::= { emsTraps 74 }
billingSharedMemEntryRmFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Shared Memory Entry Removed Failed for billing.
Software error. Entry may not be in shared memory.
Threshhold: 100, Throttle: 0; Report Index: 27,
Category: billing, Level: major;
The details contains syntax in the form of:
EntryNumber = value;"
REFERENCE ""
::= { emsTraps 75 }
billingWrongPortNum NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Wrong Port Number Specified in Billing.
Wrong port number specified in platform .cfg file.
Threshhold: 100, Throttle: 0; Report Index: 28,
Category: billing, Level: major;
The details contains syntax in the form of:
PortNumber = value;"
REFERENCE ""
::= { emsTraps 76 }
billingCdbSendFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "CDB Send Failed for Billing.
TCP Send call failure.
(or)
Both EMSs down.
Threshhold: 100, Throttle: 0; Report Index: 29,
Category: billing, Level: major;
No details."
REFERENCE ""
::= { emsTraps 77 }
billingDomainNameMappingFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Domain Name Mapping Failed for Billing.
Wrong DNS name mapping specified in cfg files.
Threshhold: 100, Throttle: 0; Report Index: 30,
Category: billing, Level: major;
The details contains syntax in the form of:
Address = value;"
REFERENCE ""
::= { emsTraps 78 }
billingPortNotSpecified NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Port Not Specified in Billing.
Port not specified in platform.cfg.
Threshhold: 100, Throttle: 0; Report Index: 31,
Category: billing, Level: major;
No details."
REFERENCE ""
::= { emsTraps 79 }
billingEMSAddrNotSpecified NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EMS Address Not Specified for Billing.
Either the primary or secondary EMS address has not
been specified in the platform.cfg.
Threshhold: 100, Throttle: 0; Report Index: 32,
Category: billing, Level: major;
No details."
REFERENCE ""
::= { emsTraps 80 }
configKAMMateConfigError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "KAM: Mate configuration error.
Mate and local are configured to be same side.
(or)
One or both sides configured with wrong mate
Redundancy DNS name.
(or)
IP addresses associated with Mate Redundancy DNS names
have been changed.
Threshhold: 100, Throttle: 0; Report Index: 3,
Category: config, Level: major;
The details contains syntax in the form of:
Reason = value"
REFERENCE ""
::= { emsTraps 81 }
dbErrorsInEMSDb NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "There are errors in EMS database DefError queue;
contact support.
Replication data conflicts.
(or)
Update/delete on nonexisting data.
(or)
Unique constraint (Primary key) violated.
Threshhold: 100, Throttle: 0; Report Index: 3,
Category: database, Level: critical;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
ErrorCount = value; TimeStamp = value"
REFERENCE ""
::= { emsTraps 82 }
dbReplicationPUSHJobBroken NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EMS db_heart_beat: replication PUSH job broken.
Remote database is not accessible.
(or)
Remote database is down.
(or)
Remote Oracle Listener process died.
(or)
Network connection is broken.
Threshhold: 100, Throttle: 0; Report Index: 4,
Category: database, Level: critical;
The details contains syntax in the form of:
HostName = value; LocalDatabase = value;
RemoteDatabase = value; Job = value; TimeStamp = value"
REFERENCE ""
::= { emsTraps 83 }
dbHeartBeatProcessDied NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EMS db_heart_beat process died.
Threshhold: 100, Throttle: 0; Report Index: 5,
Category: database, Level: critical;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
TimeStamp =value"
REFERENCE ""
::= { emsTraps 84 }
dbReplicationDefTranDestQueueOverloaded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EMS database replication DefTranDest queue overloaded.
Replication PUSH job is broken.
(or)
Remote database is not accessible.
(or)
Database is overloaded.
Threshhold: 100, Throttle: 0; Report Index: 6,
Category: database, Level: major;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
Threshold = value; TimeStamp = value"
REFERENCE ""
::= { emsTraps 85 }
dbDefTranQueueOverloaded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EMS database DefTran Queue is overloaded.
EMS database DefTranDest queue is overloaded.
(or)
Too many errors in DefError queue.
(or)
Replication PURGE job is broken or overloaded.
Threshhold: 100, Throttle: 0; Report Index: 7,
Category: database, Level: minor;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
Threshhold = value; TimeStamp = value"
REFERENCE ""
::= { emsTraps 86 }
dbTablespaceOutOfSpace NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EMS database tablespace is out of free space.
Increased data volume or transactions
Threshhold: 100, Throttle: 0; Report Index: 8,
Category: database, Level: major;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
TablespaceName = value; TotalFreeSpace = value;
TimeStamp = value"
REFERENCE ""
::= { emsTraps 87 }
dbArchiveLogDirGettingFull NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "URGENT: EMS database archive log directory is getting
full.
Transaction volume increased.
Threshhold: 100, Throttle: 0; Report Index: 9,
Category: database, Level: critical;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
DirectoryName = value; FreeSpace = value;
TimeStamp = value"
REFERENCE ""
::= { emsTraps 88 }
dbBackupFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EMS database: Backup failed.
System or hardware unstable.
Threshhold: 100, Throttle: 0; Report Index: 10,
Category: database, Level: major;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
Message1 = value; Message2 = value;
TimeStamp = value"
REFERENCE ""
::= { emsTraps 89 }
dbLogAlerts NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EMS database alert. Log alerts.
Threshhold: 100, Throttle: 0; Report Index: 11,
Category: database, Level: major;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
Message1 = value; Message2 = value;
TimeStamp = value"
REFERENCE ""
::= { emsTraps 90 }
dbProcessDied NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Possible Error Source:
1. Process Name, if local process is not running.
2. 'Cannot_connect_database' if local DB is unreachable.
3. 'Cannot_connect_' if remote DB is unreachable.
Threshhold: 100, Throttle: 0; Report Index: 12,
Category: database, Level: critical;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
ErrorSource = value; Message = value;
TimeStamp = value"
REFERENCE ""
::= { emsTraps 91 }
dbPerformanceAlert NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EMS database performance alert.
See StatEvenName.
Threshhold: 100, Throttle: 0; Report Index: 13,
Category: database, Level: major;
The details contains syntax in the form of:
HostName = value; DatabaseName = value;
StatEventName = value; Value1 = value;
Value2 = value; Message = value;
TimeStamp = value"
REFERENCE ""
::= { emsTraps 92 }
maintBinaryDoesNotExist NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "PGM: Binary does not exist for Process.
Platform not installed correctly.
Threshhold: 100, Throttle: 0; Report Index: 40,
Category: maintenance, Level: critical;
The details contains syntax in the form of:
ProgramName = value; ExecutableName = value"
REFERENCE ""
::= { emsTraps 93 }
maintNumHBMsgsRcvdIncorrect NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "KAM: No. of HB Messages received is less than 50% of
expected.
Network problem.
Threshhold: 100, Throttle: 0; Report Index: 42,
Category: maintenance, Level: minor;
The details contains syntax in the form of:
InterfaceName = value; Address = value;
ExpectedHBMessages = value; HBMessagesReceived = value"
REFERENCE ""
::= { emsTraps 94 }
maintProcessFailedUpInActiveMode NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "PMG: Process failed to come up in active mode.
Software or configuration problem.
Threshhold: 100, Throttle: 0; Report Index: 43,
Category: maintenance, Level: critical;
The details contains syntax in the form of:
ProcessName = value; ProcessGroup = value"
REFERENCE ""
::= { emsTraps 95 }
maintProcessFailedUpInStandbyMode NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "PMG: Process failed to come up in standby mode.
Software or configuration problem.
Threshhold: 100, Throttle: 0; Report Index: 44,
Category: maintenance, Level: critical;
The details contains syntax in the form of:
ProcessName = value; ProcessGroup = value"
REFERENCE ""
::= { emsTraps 96 }
maintAppInstStateChangeFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Application Instance State Change Failure.
Switchover of application instance failed because of
a platform fault.
Threshhold: 100, Throttle: 0; Report Index: 45,
Category: maintenance, Level: major;
The details contains syntax in the form of:
ApplicationInstance = value; FailureReason = value"
REFERENCE ""
::= { emsTraps 97 }
billingFTPParamInvalid NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Billing FTP Parameters Invalid.
One or more parameters were null.
Threshhold: 100, Throttle: 0; Report Index: 33,
Category: billing, Level: major;
The details contains syntax in the form of:
Billing Server Direct = value; Billing Servie Addre = value;
FTP user name=value"
REFERENCE ""
::= { emsTraps 98 }
dbTableSizeExceedsMinorThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Table Size Exceeds Minor Threshold Limit.
The pre-provisioned size for the stated table is nearing the
licensed limit on the number of entries it can hold.
Threshhold: 100, Throttle: 0; Report Index: 14,
Category: database, Level: minor;
The details contains syntax in the form of:
TableName = value"
REFERENCE ""
::= { emsTraps 99 }
dbTableSizeExceedsMajorThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Table Size Exceeds Major Threshold Limit.
Major threshold limit exceeded.
Threshhold: 100, Throttle: 0; Report Index: 15,
Category: database, Level: major;
The details contains syntax in the form of:
TableName = value"
REFERENCE ""
::= { emsTraps 100 }
dbTableSizeExceedsCriticalThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Table Size Exceeds Critical Threshold Limit.
Critical threshold limit exceeded.
Threshhold: 100, Throttle: 0; Report Index: 16,
Category: database, Level: critical;
The details contains syntax in the form of:
TableName = value"
REFERENCE ""
::= { emsTraps 101 }
allBillingLinksAtCADownOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "All Billing Links at Call Agent Down.
Cable has been pulled.
(or)
(ifconfig down) has been performed on the interfaces.
Threshhold: 100, Throttle: 0; Report Index: 34,
Category: billing, Level: critical;
There are no details associated"
REFERENCE ""
::= { emsTraps 102 }
allBillingLinksAtBillingServerDownOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "All Billing Links at Billing Server Down.
Cable may have been pulled.
(or)
(ifconfig down) may have been performed on the
interfaces.
Threshhold: 100, Throttle: 0; Report Index: 35,
Category: billing, Level: critical;
There are no details associated"
REFERENCE ""
::= { emsTraps 103 }
threadWatchdogCounterExpired NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Thread watchdog counter expired for a thread.
Software error.
Threshhold: 100, Throttle: 0; Report Index: 47,
Category: maintenance, Level: critical;
The details contains syntax in the form of:
Process Name = value; Thread Type = value;
Thread Instance = value"
REFERENCE ""
::= { emsTraps 104 }
idxTableUsageExceedMinorThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IDX Table Usage Exceeded Minor Usage Threshhold Level.
Table not large enough.
(or)
Table not matched well with EMS.
(or)
System is over provisioned.
Threshhold: 100, Throttle: 0; Report Index: 48,
Category: maintenance, Level: minor;
The details contains syntax in the form of:
Table Name = value; Size = value;
Used = value"
REFERENCE ""
::= { emsTraps 105 }
idxTableUsageExceedMajorThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IDX Table Usage Exceeded Major Usage Threshhold Level.
Table not large enough.
(or)
Table not matched well with EMS.
(or)
System is over provisioned.
Threshhold: 100, Throttle: 0; Report Index: 49,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Table Name = value; Table Size = value;
Used = value"
REFERENCE ""
::= { emsTraps 106 }
idxTableUsageExceedCriticalThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IDX Table Usage Exceeded Critical Usage Threshhold
Level.
Table not large enough.
(or)
Table not matched well with EMS.
(or)
System is over provisioned.
Threshhold: 100, Throttle: 0; Report Index: 50,
Category: maintenance, Level: critical;
The details contains syntax in the form of:
Table Name = value; Table Size = value;
Used = value"
REFERENCE ""
::= { emsTraps 107 }
aProcXceeds70PercUsage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "A Process Exceeds 70 Percent CPU Utilization.
A process has entered a state of erratic behavior.
Threshhold: 100, Throttle: 0; Report Index: 51,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Hostname = value; PID = value ;
Process Name = value; CPU Usage = value"
REFERENCE ""
::= { emsTraps 108 }
cpuUsageOver90Percent NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "The CPU usage is over 90 Percent busy.
Threshhold: 100, Throttle: 0; Report Index: 53,
Category: maintenance, Level: critical;
The details contains syntax in the form of:
Hostname = value; CPU Usage = value"
REFERENCE ""
::= { emsTraps 109 }
loadAverageXceeds3For5Min NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "The load average exceeds 3 for at least 5 minutes.
Multiple processes are vying for processing time on the
system, which is normal in a high traffic situation such as
heavy call processing or bulk provisioning.
Threshhold: 100, Throttle: 0; Report Index: 55,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Hostname = value; Load Average = value"
REFERENCE ""
::= { emsTraps 110 }
mem95PercentExhaustAndSwapIs50Percent NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Memory is 95 Percent exhausted and the swap is 50
Percent consumed.
A process or multiple processes have consumed more than 95% of
the memory on the system and the operating system is utilizing more
than 50% of the swap space for process execution. This can be a
result of high call rates or bulk provisioning activity.
Threshhold: 100, Throttle: 0; Report Index: 57,
Category: maintenance, Level: critical;
The details contains syntax in the form of:
Hostname = value; Memory = value;
Swap = value"
REFERENCE ""
::= { emsTraps 111 }
diskReportsXceeds70Percent NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Disk reports greater than 70 percent utilization.
Threshhold: 100, Throttle: 0; Report Index: 59,
Category: maintenance, Level: major;
The details contains syntax in the form of:
Hostname = value; Disk = value;
Usage = value"
REFERENCE ""
::= { emsTraps 112 }
snmpAuthenticationErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SNMP Authentication Error.
NMS issuing wrong community string.
Threshhold: 100, Throttle: 0; Report Index: 9,
Category: oss, Level: minor;
The details contains syntax in the form of:
RemoteHost = value"
REFERENCE ""
::= { emsTraps 113 }
noHBMsgsRcvdThroughIntf NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "No HB messages received through the interface.
Local network interface is down.
(or)
Mate network interface on the same subnet.
(or)
Network congestion.
Threshold=100, Throttle=0, ReportIndex:61,
Category: maintenance, Level:critical;
The details contain syntax in the form:
Interface Name = value; Interface IP Address = value."
REFERENCE ""
::= { emsTraps 114 }
linkMonIntfLostComm NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Link Monitor: Interface lost communication.
Interface cable is pulled out; interface is set down
using ifconfig command.
Threshold=0, Throttle=100, ReportIndex:62,
Category: maintenance, Level:major;
The details contain syntax in the form:
Interface Name = value; Interface IP Address = value."
REFERENCE ""
::= { emsTraps 115 }
outgoingHBPeriodExceeded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Outgoing HB period exceeded limit.
This is caused by system performance degradation due to CPU
overload or excessive I/O operations.
Threshold=100, Throttle=0, ReportIndex:63,
Category: maintenance, Level:major;
The details contain syntax in the form:
Max HB period 'ms' = value; HB period 'ms' = value."
REFERENCE ""
::= { emsTraps 116 }
avgOutgoingHBPeriodExceeded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Outgoing HB period exceeds Maj Alarm limit
This is caused by system performance degradation due to CPU
overload or excessive I/O operations.
Threshold=100, Throttle=0, ReportIndex:64,
Category: maintenance, Level:major;
The details contain syntax in the form:
Max Avg HB period = value; Avg HB period = value."
REFERENCE ""
::= { emsTraps 117 }
diskPartition90PercentConsumed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Disk Partition Critically Consumed.
A process or processes is/are writing extraneous data
to the named parition.
Threshold=100, Throttle=0, ReportIndex:65,
Category: maintenance, Level:critical;
The details contain syntax in the form:
Directory = value; Device = value;
Percentage Used = value."
REFERENCE ""
::= { emsTraps 118 }
freeIPCPoolBuffBelowMinorThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "The free IPC pool buffers below minor threshold.
IPC pool buffers are not being freed properly by the application
or the application is not able to keep up with the incoming IPC
messaging traffic.
Threshold=100, Throttle=0, ReportIndex:67,
Category: maintenance, Level:minor;
The details contain syntax in the form:
Free ipc pool buffer = value; Threshold = value."
REFERENCE ""
::= { emsTraps 119 }
freeIPCPoolBuffBelowMajorThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "The free IPC pool buffers below major threshold.
IPC pool buffers are not being freed properly by the application
or the application is not able to keep up with the incoming IPC
messaging traffic.
Threshold=100, Throttle=0, ReportIndex:68,
Category: maintenance, Level:major;
The details contain syntax in the form:
Free ipc pool buffer = value; Threshold = value."
REFERENCE ""
::= { emsTraps 120 }
freeIPCPoolBuffBelowCriticalThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "The free IPC pool buffers below critical threshold.
IPC pool buffers are not being freed properly by the application
or the application is not able to keep up with the incoming IPC
messaging traffic.
Threshold=100, Throttle=0, ReportIndex:69,
Category: maintenance, Level:critical;
The details contain syntax in the form:
Free ipc pool buffer = value; Threshold = value."
REFERENCE ""
::= { emsTraps 121 }
freeIPCPoolBuffCountBelowMinRequired NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "The free IPC pool buffer count below minimum
required for sh.
IPC pool buffers are not being freed properly by the application
or the application is not able to keep up with the incoming IPC
messaging traffic.
Threshold=100, Throttle=0, ReportIndex:70,
Category: maintenance, Level:critical;
The details contain syntax in the form:
Free ipc buffer count = value; minimum count = value."
REFERENCE ""
::= { emsTraps 122 }
billingLinkFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Billing Link Failure.
Threshold=100, Throttle=0, ReportIndex:37,
Category: billing, Level:major;
The details contain syntax in the form:
Interface name = value"
REFERENCE ""
::= { emsTraps 123 }
platformConfigError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Configuration Error in Platform file.
Wrong configuration in the platform.cfg.
Threshold=100, Throttle=0, ReportIndex:4,
Category: config, Level:critical;
The details contain syntax in the form:
Reason = value."
REFERENCE ""
::= { emsTraps 124 }
dbReplicationCopyFailed NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Replication of data failed during DB Copy.
Threshold=100, Throttle=0, ReportIndex:17,
Category: database, Level:major;
The details contain syntax in the form:
Table Name = value; Index = value;
Table ID = value."
REFERENCE ""
::= { emsTraps 125 }
oneExternalDNSNoResponse NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "DNS service response is slow.
DNS servers or the netwrok may be down.
Threshold=100, Throttle=0, ReportIndex:72,
Category: maintenance, Level:major;
There are no details associated."
REFERENCE ""
::= { emsTraps 126 }
allExternalDNSNoResponse NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "All external DNS server(s) are not responsive.
DNS servers or the netwrok may be down.
Threshold=100, Throttle=0, ReportIndex:73,
Category: maintenance, Level:critical;
There are no details associated."
REFERENCE ""
::= { emsTraps 127 }
localServerNotResponsive NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Local server not responsive.
This is a future trap that is not yet implemented. The BTS will
not issue this trap in the 3.x release series.
Threshold=100, Throttle=0, ReportIndex:74,
Category: maintenance, Level:critical;
The details contain syntax in the form:
the name of the loca = value."
REFERENCE ""
::= { emsTraps 128 }
ipAddrDNSMismatch NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Mismatch of IP addr % local server and DNS.
DNS updates are not getting to the BTS from the external server, or
the discrepancy was detected before the local DNS lookup table was
updated.
Threshold=100, Throttle=0, ReportIndex:75,
Category: maintenance, Level:major;
The details contain syntax in the form:
hostname = value; IP Addr local server = value;
IP Addr remote server = value."
REFERENCE ""
::= { emsTraps 129 }
mateTimeDiffersBeyondToleranceOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Mate time differs beyond tolerance.
Time synchronization not working.
Threshold=100, Throttle=0, ReportIndex:77,
Category: maintenance, Level:major;
The details contain syntax in the form:
Max time difference = value; Actual time differen = value."
REFERENCE ""
::= { emsTraps 130 }
avgOutHBPeriodExceedsLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Average outgoing HB period exceeds Critical limit
Threshold=1, Throttle=0, ReportIndex:82,
Category: maintenance, Level:critical;
The details contain syntax in the form:
Critical Threshold = value; Current Avg. HB period = value."
REFERENCE ""
::= { emsTraps 131 }
emLogFileAccessErrorOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EM Log file access error
Threshold=50, Throttle=0, ReportIndex:38,
Category: billing, Level:major;
The details contain syntax in the form:
Type Of access error = value; Reason for err = value;
Sequence number off = value; Idx of evt message = value;
Location tag = value."
REFERENCE ""
::= { emsTraps 132 }
radiusAcctingRcvFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "RADIUS Accounting receive failure
Threshold=25, Throttle=0, ReportIndex:39,
Category: billing, Level:minor;
The details contain syntax in the form:
Location Tag = value."
REFERENCE ""
::= { emsTraps 133 }
emEncodeFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "EM encode failure.
There is a problem with the format of the data to be
sent to the RKS.
Threshold=100, Throttle=0, ReportIndex:40,
Category: billing, Level:minor;
The details contain syntax in the form:
Location tage = value."
REFERENCE ""
::= { emsTraps 134 }
messageContentErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Message content error
Threshold=100, Throttle=0, ReportIndex:41,
Category: billing, Level:minor;
The details contain syntax in the form:
Message type = value; Field name = value;
Field value(text) = value; Field value (numeric) = value;
Location tag = value."
REFERENCE ""
::= { emsTraps 135 }
ipcQueueReadFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IPC queue read failure
Threshold=100, Throttle=0, ReportIndex:2,
Category: system, Level:minor;
The details contain syntax in the form:
Queue name = value; Location tage = value."
REFERENCE ""
::= { emsTraps 136 }
ipcMsgAllocateFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IPC message allocate failure
Threshold=100, Throttle=0, ReportIndex:3,
Category: system, Level:minor;
The details contain syntax in the form:
Requested size = value; Error code = value;
Location tag = value."
REFERENCE ""
::= { emsTraps 137 }
ipcMsgSendFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IPC message send failure
Threshold=50, Throttle=0, ReportIndex:4,
Category: system, Level:minor;
The details contain syntax in the form:
Error code = value; Destination process = value;
Message number = value; Location tag = value."
REFERENCE ""
::= { emsTraps 138 }
idxListInsertErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IDX list insert error
Threshold=100, Throttle=0, ReportIndex:6,
Category: system, Level:minor;
The details contain syntax in the form:
List name = value; Index of entry being = value;
Location tag = value."
REFERENCE ""
::= { emsTraps 139 }
idxListRemoveErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IDX list remove error
Threshold=100, Throttle=0, ReportIndex:7,
Category: system, Level:minor;
The details contain syntax in the form:
List name = value; Index of entry being = value;
Location tag = value."
REFERENCE ""
::= { emsTraps 140 }
threadCreationFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Thread creation failure
Threshold=100, Throttle=0, ReportIndex:8,
Category: system, Level:major;
The details contain syntax in the form:
Error code = value; Thread name = value;
Location tag = value."
REFERENCE ""
::= { emsTraps 141 }
swapSpaceBelowMinorThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Swap Space below minor threshold.
Threshold=100, Throttle=0, ReportIndex:83,
Category: Maintenance, Level:minor;
The details contain syntax in the form:
Minor threshold(MB) = value; Current value(MB) = value."
REFERENCE ""
::= { emsTraps 142 }
swapSpaceBelowMajorThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Swap space below major threashold.
Threshold=100, Throttle=0, ReportIndex:84,
Category: Maintenance, Level:major;
The details contain syntax in the form:
Major threshold(MB) = value; Current value(MB) = value."
REFERENCE ""
::= { emsTraps 143 }
swapSpaceBelowCriticalThresh NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Swap space below critical threshold.
Threshold=100, Throttle=0, ReportIndex:85,
Category: Maintenance, Level:critical;
The details contain syntax in the form:
Critical threshold(MB) = value; Current value(MB) = value."
REFERENCE ""
::= { emsTraps 144 }
invalidBillingConfig NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Invalid billing configuration - program exiting.
The Call Agent is provisioned to have both CDB billing
and EM billing enabled, or is provisioned to have no
billing enabled.
Threshold=50, Throttle=0, ReportIndex:43,
Category: Billing, Level:major;
The details contain syntax in the form:
Table name = value; Table name = value;
Location tag = value."
REFERENCE ""
::= { emsTraps 145 }
idxUpdateRegistrationErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IDX update registration error.
Application unsuccessfully requested to be notified of
table changes.
Threshold=100, Throttle=0, ReportIndex:10,
Category: System, Level:minor;
The details contain syntax in the form:
Error code = value; Table name = value;
Location tag = value."
REFERENCE ""
::= { emsTraps 146 }
idxTableAddEntryErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IDX table add - entry error.
Internal error.
Threshold=100, Throttle=0, ReportIndex:11,
Category: System, Level:minor;
The details contain syntax in the form:
Table name = value; Index of entry being = value;
Error code = value; Location tag = value."
REFERENCE ""
::= { emsTraps 147 }
rksUnreachableFor1Hour NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "RKSs unreachable for 1 hour.
Billing has not been able to communicate with any
RKS for the past one hour.
Threshold=25, Throttle=0, ReportIndex:47,
Category: billing, Level:minor,
The details contain syntax in the form:
Location tag = value."
REFERENCE ""
::= { emsTraps 148 }
rksUnreachableFor3Hour NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "RKSs unreachable for 3 hours.
Billing has not been able to communicate with any
RKS for the past three hours.
Threshold=25, Throttle=0, ReportIndex:48,
Category: billing, Level:major,
The details contain syntax in the form:
Location tag = value."
REFERENCE ""
::= { emsTraps 149 }
rksUnreachableFor5Hour NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "RKSs unreachable for 5 hours.
Billing has not been able to communicate with any
RKS for the past five hours.
Threshold=25, Throttle=0, ReportIndex:49,
Category: billing, Level:critical,
The details contain syntax in the form:
Location tag = value."
REFERENCE ""
::= { emsTraps 150 }
ipcInputQEnteredThrottleState NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IPC Input Queue Entered Throttle State.
The indicated thread is not able to process its IPC input
messages fast enough, hence the input queue has grown too
large and is using up too much of the IPC memory pool
resource.
Threshold=500, Throttle=0, ReportIndex:97,
Category: Maintenance, Level: critical;
The details contain syntax in the form:
Process Name = value; Thread Type =;
Thread Instance = value; Hi Watermark = value;
Lo Watermark = value."
REFERENCE ""
::= { emsTraps 151 }
ipcInputQAt25PctHiWatermark NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IPC Input Queue Depth at 25 Percent of its Hi Watermark.
The indicated thread is not able to process its IPC input
messages fast enough, hence the input queue has grown too
large and is at 25% of the level at which it will enter
the throttle state.
Threshold=500, Throttle=0, ReportIndex:98,
Category: Maintenance, Level: minor;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value; Hi Watermark = value;
Lo Watermark = value."
REFERENCE ""
::= { emsTraps 152 }
ipcInputQAt50PctHiWatermark NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IPC Input Queue Depth at 50 Percent of its Hi Watermark.
The indicated thread is not able to process its IPC input
messages fast enough, hence the input queue has grown too
large and is at 50% of the level at which it will enter
the throttle state.
Threshold=500, Throttle=0, ReportIndex:99,
Category: Maintenance, Level: major;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value; Hi Watermark = value;
Lo Watermark = value."
REFERENCE ""
::= { emsTraps 153 }
ipcInputQAt75PctHiWatermark NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "IPC Input Queue Depth at 75 Percent of its Hi Watermark.
The indicated thread is not able to process its IPC input
messages fast enough, hence the input queue has grown too
large and is at 75% of the level at which it will enter
the throttle state.
Threshold=500, Throttle=0, ReportIndex:100,
Category: Maintenance, Level: critical;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value; Hi Watermark = value;
Lo Watermark = value."
REFERENCE ""
::= { emsTraps 154 }
adpReportedAuditFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Critical Internal Audit Failure
Threshold=100, Throttle=0, ReportIndex:5,
Category: Audit, Level: critical;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { emsTraps 155 }
eventMsgDiskSpace50PctFull NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Event Message disk space 50 percent full.
Event Message storage has reached 50% of the maximum storage allowed.
Threshold=100, Throttle=0, ReportIndex:53,
Category: Billing, Level: minor;
The details contain syntax in the form:
Number of megabytes used for Eve = value;
Directory containing Event Messa = value; Location tag = value."
REFERENCE ""
::= { emsTraps 156 }
eventMsgDiskSpace70PctFull NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Event Message disk space 70 percent full.
Event Message storage has reached 70% of the maximum storage allowed.
Threshold=100, Throttle=0, ReportIndex:54,
Category: Billing, Level: major;
The details contain syntax in the form:
Number of megabytes used for Eve = value;
Directory containing Event Messa = value; Location tag = value."
REFERENCE ""
::= { emsTraps 157 }
eventMsgDiskSpace100PctFull NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Event Message disk space 100 percent full.
Event Message storage has been completely filled. No additional
Event Messages will be written to disk until more space is made
available.
Threshold=100, Throttle=0, ReportIndex:55,
Category: Billing, Level: critical;
The details contain syntax in the form:
Number of megabytes used for Eve = value;
Directory containing Event Messa = value; Location tag = value."
REFERENCE ""
::= { emsTraps 158 }
diskPartitionSignificantlyConsumedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Disk Partition Significantly Consumed.
A process or processes is/are writing extraneous data
to the named parition.
Threshold=100, Throttle=0, ReportIndex:66,
Category: maintenance, Level:major;
The details contain syntax in the form:
Directory = value; Device = value;
Percentage Used = value."
REFERENCE ""
::= { emsTraps 159 }
measuremntHandshakeErrSchemaInconsist NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Measurement Handshake Error: Schema Inconsistency.
Counters added/deleted from schema in Oracle but not
in the Call Agent.
Threshold=5, Throttle=0, ReportIndex:12,
Category: statistics Level:major,
The details contain syntax in the form:
Schemas Out of Syncronization = value."
REFERENCE ""
::= { emsTraps 160 }
tmmAPIFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "tmm API failure.
Unable to initialize shared memory.
Threshold=1, Throttle=10, ReportIndex:13,
Category: statistics, Level:major,
The details contain syntax in the form:
TMM error = value."
REFERENCE ""
::= { emsTraps 161 }
systemHealthReportCollectionErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "System Health Report Collection Error.
An error occur while collecting System Health Report.
Threshold=100, Throttle=0, ReportIndex:86,
Category: maintenance, Level:minor,
The details contain syntax in the form:
ErrString = value."
REFERENCE ""
::= { emsTraps 162 }
statusUpdateProcessRequestFailedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Status Update Process Request Failed.
'status' command not working properly.
Threshold=100, Throttle=0, ReportIndex:87,
Category: maintenance, Level:major,
The details contain syntax in the form:
ErrString = value; ComponentType = value."
REFERENCE ""
::= { emsTraps 163 }
statusUpdateProcessDBListRetrvErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Status Update Process DB List Retrieval Error.
Oracle DB is not working properly.
Threshold=100, Throttle=0, ReportIndex:88,
Category: maintenance, Level:major,
The details contain syntax in the form:
ErrString = value."
REFERENCE ""
::= { emsTraps 164 }
statusUpdateProcessDBUpdateErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Status Update Process DB Update Error.
MySQL DB on EMS is not working properly.
Threshold=100, Throttle=0, ReportIndex:89,
Category: maintenance, Level:major,
The details contain syntax in the form:
ErrString = value; SQLCommand = value."
REFERENCE ""
::= { emsTraps 165 }
diskPartitionModeratelyConsumedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Disk Partition Moderately Consumed.
A process or processes is/are writing extraneous data
to the named parition.
Threshold=100, Throttle=0, ReportIndex:90,
Category: maintenance, Level:minor;
The details contain syntax in the form:
Directory = value; Device = value;
Percentage Used = value."
REFERENCE ""
::= { emsTraps 166 }
switchoverInProgressOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Switchover in Progress.
This alarm is issued when system switchover either
due to manual switchover (via CLI command), failover
or automatic switchover.
Threshold=100, Throttle=0, ReportIndex:101,
Category: maintenance, Level:critical;
The details contain syntax in the form:
Local state = value; Mate state = value;
Reason = value."
REFERENCE ""
::= { emsTraps 167 }
billingDataCorruptionDetectedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Billing data corruption detected.
Billing data stored on disk may have become corrupted
due to a power outage, ungraceful shutdown, or disk
failure.
Threshold=100, Throttle=0, ReportIndex:56,
Category: Billing, Level: critical;
The details contain syntax in the form:
File/table corrupted = value; Low end of records = value;
High end of records = value; Error code = value;
Location tag = value."
REFERENCE ""
::= { emsTraps 168 }
qamDbmIdxFailedWithErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "QAM DBM IDX Failed with Error.
QAM is receiving an error because of Data Mismatch
between what is in DBM IDX and what is in EMS
db (oracle).
(or)
DBM IDX is failing when attempting to perform
SQL command.
Threshold=50, Throttle=0, ReportIndex:10,
Category: OSS, Level: major;
The details contain syntax in the form:
Transaction ID = value; Sequence Number = value;
Location Of Error = value; DBM Result = value."
REFERENCE ""
::= { emsTraps 169 }
replicationDataFlushTimeoutDuringSwitchoverOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Replication data flush timeout during switchover.
Replication Module software problem.
Threshold=100, Throttle=0, ReportIndex:20,
Category: Database, Level: major;
The details contain syntax in the form:
Tables failed = value."
REFERENCE ""
::= { emsTraps 170 }
adpReportedMajorAuditFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Major Internal Audit Failure.
Threshold=100, Throttle=0, ReportIndex:6,
Category: Audit, Level: major;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { emsTraps 171 }
adpReportedMinorAuditFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Minor Internal Audit Failure.
Threshold=100, Throttle=0, ReportIndex:7,
Category: Audit, Level: minor;
The details contain syntax in the form:
Failure Details = value; Probable Causes = value;
Corrective Actions = value."
REFERENCE ""
::= { emsTraps 172 }
threadWatchdogCntrCloseToExpiry NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Thread watchdog counter close to expiry for a thread.
There has been a Software Error.
Threshold=100, Throttle=0, ReportIndex:102,
Category: maintenance, Level:critical;
The details contain syntax in the form:
Process Name = value; Thread Type = value;
Thread Instance = value."
REFERENCE ""
::= { emsTraps 173 }
systemSoftwareError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "System contains Software Error.
Logic path is not handled by algorithm in code.
Threshold=100, Throttle=0, ReportIndex:12,
Category: system, Level:major;
The details contain syntax in the form:
Context Description = value; FileName = value;
Line Number of code = value; Error specific Information = value."
REFERENCE ""
::= { emsTraps 174 }
socketFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Socket Failure.
Issued when there is a failure in creating the UDP
port used by the MGCP stacks.
(or)
Some other application may already be active on the
same UDP port and IP address to which the Call Agent
MGCP stack is assigned.
Threshold=100, Throttle=0, ReportIndex:7,
Category: signaling, Level:major;
The details contain syntax in the form:
Reason = value; Hostname = value."
REFERENCE ""
::= { callAgentTraps 1 }
failureInRecvingSIPMesg NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Failed to recv the sip messages.
Issued when SIP messages cannot be received. This
could be due to port conflict (two processes attempting
to use the same UDP port).
Threshold=100, Throttle=0, ReportIndex:8,
Category: signaling, Level:major;
The details contain syntax in the form:
Reason = value; Hostname = value."
REFERENCE ""
::= { callAgentTraps 2 }
failedToSendCompleteSIPMesg NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Failed to send the sip messages.
Notifies the user that the SIP stack failed to send an
SIP message due to it exceeding the maximum length of
a UDP packet.
Threshold=100, Throttle=0, ReportIndex:10,
Category: signaling, Level:minor;
The details contain syntax in the form:
DestinationAddr = value."
REFERENCE ""
::= { callAgentTraps 3 }
failedToAllocateSIPCtrlBlock NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION " Failed to allocate the sip ctrl block.
Issued when there is not enough memory to allocate a
SIP Call Control Block.
Threshold=100, Throttle=0, ReportIndex:11,
Category: signaling, Level:major;
The details contain syntax in the form:
Size = value; Detail = value."
REFERENCE ""
::= { callAgentTraps 4 }
featureServerNotResponding NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "FS not up or not responding.
Feature server platform is down or is not operating
properly.
Threshold=30, Throttle=0, ReportIndex:12,
Category: signaling, Level:critical;
The details contain syntax in the form:
FSDomainName = value; Feature Server ID = value."
REFERENCE ""
::= { callAgentTraps 5 }
ss7LinkDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SS7 Link Down.
SS7 trunk group may be out-of-service (OOS).
(or)
The local Ulticom stack may be down.
(or)
SS7 link may be disconnected or faulty.
(or)
Remote SS7 signaling site may be down or incorrectly
configured.
Threshold=100, Throttle=0, ReportIndex:13,
Category: signaling, Level:major;
The details contain syntax in the form:
LinkNumber = value; LinkName = value."
REFERENCE ""
::= { callAgentTraps 6 }
linkRemotelyInhibited NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Link is remotely inhibited.
Issued when the specified SS7 link is inhibited at
the remote end.
Threshold=100, Throttle=0, ReportIndex:14,
Category: signaling, Level:minor;
The details contain syntax in the form:
LinkNumber = value; LinkName = value."
REFERENCE ""
::= { callAgentTraps 7 }
linkLocallyInhibited NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Link is locally inhibited.
Issued when the specified SS7 link is inhibited at the
local end.
Threshold=100, Throttle=0, ReportIndex:15,
Category: signaling, Level:minor;
The details contain syntax in the form:
LinkNumber = value; LinkName = value."
REFERENCE ""
::= { callAgentTraps 8 }
linkCongested NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Link is congested.
Issued when the specified SS7 link is experiencing
congestion.
Threshold=100, Throttle=0, ReportIndex:16,
Category: signaling, Level:minor;
The details contain syntax in the form:
LinkNumber = value."
REFERENCE ""
::= { callAgentTraps 9 }
linkLocalProcOutage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Local processor outage in link.
Issued when the specified SS7 link has experienced a
processor outage.
Threshold=100, Throttle=0, ReportIndex:17,
Category: signaling, Level:minor;
The details contain syntax in the form:
LinkNumber = value; LinkName = value."
REFERENCE ""
::= { callAgentTraps 10 }
linkRemoteProcOutage NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Remote processor outage in link.
Issued when the specified SS7 link has experienced a
processor outage.
Threshold=100, Throttle=0, ReportIndex:18,
Category: signaling, Level:minor;
The details contain syntax in the form:
LinkNumber = value; LinkName = value."
REFERENCE ""
::= { callAgentTraps 11 }
linkSetInaccessibleOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Linkset inaccessible.
Issued when the specified SS7 link set is inaccessible.
Threshold=100, Throttle=0, ReportIndex:19,
Category: signaling, Level:minor;
The details contain syntax in the form:
LinkSetNumber = value; LinkSetName = value."
REFERENCE ""
::= { callAgentTraps 12 }
linkSetCongestionOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Linkset congestion.
Issued when the specified SS7 link set is experiencing
congestion.
Threshold=100, Throttle=0, ReportIndex:20,
Category: signaling, Level:minor;
The details contain syntax in the form:
LinkSetNumber = value; LinkSetName = value;
CongestionLevel = value."
REFERENCE ""
::= { callAgentTraps 13 }
routeSetFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Routeset failure.
Issued when the specified route set has experienced a
failure.
Threshold=100, Throttle=0, ReportIndex:21,
Category: signaling, Level:major;
The details contain syntax in the form:
RouteSetNumber = value; RouteSetName = value."
REFERENCE ""
::= { callAgentTraps 14 }
routeSetCongestedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Routeset Congested.
Issued when the specified route set is experiencing
congestion.
Threshold=100, Throttle=0, ReportIndex:22,
Category: signaling, Level:minor;
The details contain syntax in the form:
RouteSetNumber = value; RouteSetName = value;
CongestionLevel = value."
REFERENCE ""
::= { callAgentTraps 15 }
dpcNotAvailable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "DPC Not available.
Issued when the specified DPC is not available. This
is usually caused by one of the following conditions:
A failure in the affected DPC.
An unavailable route between Cisco BTS 10200
Softswitch and the affected DPC.
Threshold=100, Throttle=0, ReportIndex:23,
Category: signaling, Level:major;
The details contain syntax in the form:
DPC = value."
REFERENCE ""
::= { callAgentTraps 16 }
dpcCongestedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "DPC Congested.
Issued when the specified destination point code is
congested.
Threshold=100, Throttle=0, ReportIndex:24,
Category: signaling, Level:minor;
The details contain syntax in the form:
DPC = value; DPCType=value;
Congestionlevel = value."
REFERENCE ""
::= { callAgentTraps 17 }
autoStateChangeISDNTG NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "AutoState change.
Issued when the specified ISDN trunk group's status
was changed due to a media gateway operation.
Threshhold: 100, Throttle: 0;
Report Index: 59, Category: signaling, Level: major;
The details contains syntax in the form of:
TrunkGrpName=value; TrunkGrpIndex=value;
MediaGwName=value; MediaGwIndex=value;
ServiceStatus=value."
REFERENCE ""
::= { callAgentTraps 36 }
mediaGwTerminationFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "MG termination faulty.
Issued when a media gateway or termination has gone
faulty due to the detection of an unknown endpoint,
unknown package type, and unknown event, a hardware
failure, or a general call agent error.
Threshhold: 100, Throttle: 0;
Report Index: 63, Category: signaling, Level: major;
The details contains syntax in the form of:
FullyQualifiedName=value; GatewayType=value;
ReasonForFailure=value."
REFERENCE ""
::= { callAgentTraps 38 }
mgaRunningOutOfSharedMemoryPoolsOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "MGA running out of shm pools.
Issued when the MGCP signaling adapter was unable to
allocate data store for an IPC message due to a lack
of resources.
Threshhold: 100, Throttle: 0;
Report Index: 64, Category: signaling, Level: critical"
REFERENCE ""
::= { callAgentTraps 39 }
mgaRunningOutOfHeapMemoryOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "MGA running out of heap memory.
Issued when the MGCP signaling adapter was unable to
allocate data store for an IPC message from the heap
due to a lack of resources.
Threshhold: 100, Throttle: 0;
Report Index: 65, Category: signaling, Level: critical"
REFERENCE ""
::= { callAgentTraps 40 }
caInternalError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "CA Internal error.
Issued when a call agent internal error has occurred
causing the restart of the MGCP signaling adapter.
Threshhold: 100, Throttle: 0;
Report Index: 66, Category: signaling, Level: major;
The details contains syntax in the form of:
FullyQualifiedDomainName=value;
reason = value;
detailedreason = value."
REFERENCE ""
::= { callAgentTraps 41 }
gatewayReturningTransientError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Gateway / termination returning transient error.
Issued when a transient error is being returned from
the specified media gateway.
Threshhold: 100, Throttle: 0;
Report Index: 67, Category: signaling, Level: major;
The details contains syntax in the form of:
FullyQualifiedDomainName=value;
TransientErrorString = value."
REFERENCE ""
::= { callAgentTraps 42 }
mgDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Gateway / termination down.
Issued when the specified media gateway notifies the
CA it is going out-of-service. This could be due to
the gateway sending RSIP message or due to being
powered down, the MGCP application going faulty, or a
hardware failure.
Threshhold: 100, Throttle: 0;
Report Index: 68, Category: signaling, Level: major;
The details contains syntax in the form of:
FullyQualifiedDomainName=value; MG Type = value;
Failure Cause = value; Subscriber Info = value;
ICMP ping status = value."
REFERENCE ""
::= { callAgentTraps 43 }
invalCADomNameConfigured NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Invalid CA Domain Name Configured.
SIP request from FS to CA timed out. Could result from
a link or CA failure.
Threshhold: 100, Throttle: 0;
Report Index: 69, Category: signaling, Level: critical;
The details contains syntax in the form of:
ConfiguredCAName = value."
REFERENCE ""
::= { callAgentTraps 44 }
signalingSS7StackNotReady NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SS7 Stack not ready.
SS7 stack not configured properly.
(or)
SS7 stack not ready.
Threshhold: 100, Throttle: 0; Report Index: 75,
Category: signaling, Level: critical;
The details contains syntax in the form of:
LogicalName=value"
REFERENCE ""
::= { callAgentTraps 45 }
timeoutOnIPAddressOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Timeout on IP Address.
Issued when BTS 10200 Softswitch is unable to
communicate with a gateway.
Threshold: 100, Throttle: 0; Report Index: 9,
Category: signaling, Level: major;
The details contains syntax in the form of:
MGWTermName=value; GatewayType=value;
PossibleCause=value."
REFERENCE ""
::= { callAgentTraps 46 }
isdnSingleDChanDownNFAS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "ISDN single D-channel down for NFAS.
One of the ISDN d-channels in PRI is down.
Threshold=100, Throttle=0, ReportIndex:78,
Category: signaling, Level:minor;
The details contain syntax in the form:
Trunk Group Id = value; Trunk Group Idx = value;
Is_Primary_D_Channel = value."
REFERENCE ""
::= { callAgentTraps 47 }
genMGCPSignalingErrMGWandCA NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "General MGCP Signaling Error between MGW and CA.
MGCP signaling interop error.
Threshold=100, Throttle=0, ReportIndex:79,
Category: signaling, Level:major;
The details contain syntax in the form:
Entity Name = value; General Context = value;
Specific Context = value."
REFERENCE ""
::= { callAgentTraps 48 }
outOfBoundsMemSockErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Out of Bounds, Memory/Socket Error.
Out of heap memory.
(or)
Out of IPC pool memory.
(or)
Socket error; inappropriate/already bound socket in use.
Threshold=100, Throttle=0, ReportIndex:80,
Category: signaling, Level:critical;
The details contain syntax in the form:
Process Name = value; Description = value."
REFERENCE ""
::= { callAgentTraps 49 }
insufficientHeapMem NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Insufficient heap memory.
Issued when H323 signaling adaptor was unable to
allocated memory from the system.
Threshold=100, Throttle=0, ReportIndex:81,
Category: signaling, Level:critical;
The details contain syntax in the form:
gateway_id = value."
REFERENCE ""
::= { callAgentTraps 50 }
insufficientSharedMem NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Insufficient shared memory pools.
Issued when H323 signaling adapter was unable to
allocate storage.
Threshold=100, Throttle=0, ReportIndex:82,
Category: signaling, Level:critical;
The details contain syntax in the form:
gateway_id = value."
REFERENCE ""
::= { callAgentTraps 51 }
errWhileBindingSock NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Error while binding to socket.
Threshold=100, Throttle=0, ReportIndex:83,
Category: signaling, Level:critical;
The details contain syntax in the form:
gateway_id = value; socket_id = value;
local_tsap_address = value; reason_str = value."
REFERENCE ""
::= { callAgentTraps 52 }
reachedMaxSockLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Reached maximum socket limit.
The configuration setting of an h3a parameter in platform.cfg is wrong.
Threshold=100, Throttle=0, ReportIndex:84,
Category: signaling, Level:critical;
The details contain syntax in the form:
gateway_id = value; active_sockets = value."
REFERENCE ""
::= { callAgentTraps 53 }
initializationFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Initialization Failure.
Process initialization failure has occurred.
Threshold=100, Throttle=0, ReportIndex:85,
Category: signaling, Level:critical;
The details contain syntax in the form:
gateway_id = value; reason_str = value."
REFERENCE ""
::= { callAgentTraps 54 }
remoteH323GWNotReachable NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Remote H323 gateway is not reachable.
Loss of communication with a remote gateway.
Threshold=100, Throttle=0, ReportIndex:86,
Category: signaling, Level:major;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value."
REFERENCE ""
::= { callAgentTraps 55 }
h323MsgParsingErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "H323 Message parsing error.
Unable to successfully parse an incoming H323 message.
Threshold=100, Throttle=0, ReportIndex:87,
Category: signaling, Level:major;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value."
REFERENCE ""
::= { callAgentTraps 56 }
h323MsgEncodingErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "H323 Message Encoding error.
Unable to encode an H323 message for sending.
Threshold=100, Throttle=0, ReportIndex:88,
Category: signaling, Level:major;
The details contain syntax in the form:
gateway_id = value; reason_str = value."
REFERENCE ""
::= { callAgentTraps 57 }
gatekeeperNotAvail NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Gatekeeper not available/reachable.
Threshold=100, Throttle=0, ReportIndex:89,
Category: signaling, Level:major;
The details contain syntax in the form:
gateway_id = value; gatekeeper_id = value;
gk_tsap_addr = value."
REFERENCE ""
::= { callAgentTraps 58 }
alternateGatekeeperNotResponding NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Alternate Gatekeeper is not responding.
Threshold=100, Throttle=0, ReportIndex:90,
Category: signaling, Level:major;
The details contain syntax in the form:
gateway_id = value; gatekeeper_id = value;
gk_tsap_addr = value."
REFERENCE ""
::= { callAgentTraps 59 }
endpointSecurityViolationOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Endpoint Security Violation.
An H323 security violation has occurred.
Threshold=100, Throttle=0, ReportIndex:91,
Category: signaling, Level:major;
The details contain syntax in the form:
gateway_id = value; gatekeeper_id = value;
gk_tsap_addr = value."
REFERENCE ""
::= { callAgentTraps 60 }
invalidCallId NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "invalid Call Identifier.
The call id was invalid or changed mid-call.
Threshold=100, Throttle=0, ReportIndex:92,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value;
call_id = value."
REFERENCE ""
::= { callAgentTraps 61 }
invalidCallRefValue NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Invalid Call Reference Value.
The call id was invalid or changed mid-call.
Threshold=100, Throttle=0, ReportIndex:93,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value;
call_id = value; call_ref_value = value."
REFERENCE ""
::= { callAgentTraps 62 }
invalidConferenceId NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Invalid conference identifier.
The call id was invalid or changed mid-call.
Threshold=100, Throttle=0, ReportIndex:94,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; reason_str = value;
remote_gw_port = value; call_id = value;
conference_id = value."
REFERENCE ""
::= { callAgentTraps 63 }
invalidMsgFromNetwork NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Invalid Message from the network.
Unsupported or invalid message type received from network.
Threshold=100, Throttle=0, ReportIndex:95,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; remote_gw_tsap_addr = value;
call_id = value; conf_id = value;
call_ref_value = value."
REFERENCE ""
::= { callAgentTraps 64 }
internalCallProcErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Internal call processing error.
A software error has occurred.
Threshold=100, Throttle=0, ReportIndex:96,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; call_id = value;
reason_str = value."
REFERENCE ""
::= { callAgentTraps 65 }
insufficientInfoToCompleteCall NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Insufficient Information to complete call.
Not enough initial call setup information was received to establish
the call.
Threshold=100, Throttle=0, ReportIndex:97,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; call_id = value;
conf_id = value; call_ref_value = value."
REFERENCE ""
::= { callAgentTraps 66 }
h323ProtocolInconsistenciesOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "H323 Protocol inconsistensies.
The H323 endpoint and BTS are running different protocol versions.
Threshold=100, Throttle=0, ReportIndex:98,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; call_id = value;
reason_str = value."
REFERENCE ""
::= { callAgentTraps 67 }
abnormalCallClearingOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Abnormal call clearing.
Unsupported or invalid message type received from network.
Threshold=100, Throttle=0, ReportIndex:99,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; call_id = value;
reason_str = value."
REFERENCE ""
::= { callAgentTraps 68 }
codecNegotiationFailedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Codec negotiation failed.
Threshold=100, Throttle=0, ReportIndex:100,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; call_id = value;
reason_str = value."
REFERENCE ""
::= { callAgentTraps 69 }
perCallSecurityViolationOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Per call security violation.
This is a future trap definition - it will not be issued in the 3.x
release series.
Threshold=100, Throttle=0, ReportIndex:101,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; call_id = value;
gatekeeper_id = value."
REFERENCE ""
::= { callAgentTraps 70 }
h323NetworkCongestedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "H323 network congested.
The H323 application processes has depleted it's resources - no
more calls can be completed.
Threshold=100, Throttle=0, ReportIndex:102,
Category: signaling, Level:minor;
The details contain syntax in the form:
gateway_id = value; gatekeeper_id = value."
REFERENCE ""
::= { callAgentTraps 71 }
featureSvrOneLinkDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Feature Server one link down.
Broken hardware.
Threshold=100, Throttle=0, ReportIndex:11,
Category: call processing, Level:minor;
The details contain syntax in the form:
Interface Name = value; Interface IP Address = value."
REFERENCE ""
::= { callAgentTraps 72 }
featureSvrBothLinksDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Feature Server both links down.
Broken hardware.
Threshold=100, Throttle=0, ReportIndex:12,
Category: call processing, Level:critical;
The details contain syntax in the form:
Interface Name = value; Interface IP Address = value;
Interface Name = value; Interface IP Address = value."
REFERENCE ""
::= { callAgentTraps 73 }
sigAggrConnectionDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SIGNALING_AGGR_CONNECTION_DOWN.
TCP connection down.
Threshold=100, Throttle=0, ReportIndex:103,
Category: signaling, Level:major;
The details contain syntax in the form:
AGGR ID = value."
REFERENCE ""
::= { callAgentTraps 74 }
sigEsaBtsDfConnectionDown NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SIGNALLING_ESA_BTS_DF_CONNECTION_DOWN.
DF server not responding.
Threshold=100, Throttle=0, ReportIndex:106,
Category: signaling, Level:minor;
There are no details associated."
REFERENCE ""
::= { callAgentTraps 75 }
siaIncorrectLogicalIPMapped NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SIA logical IP addresses not mapped correctly.
Domain name for host and/or contact is invalid.
(or)
Wrong DNS name specified for host and/or contact in
the CFG files.
(or)
IP address manager not running.
Threshold=100, Throttle=0, ReportIndex:107,
Category: signaling, Level:critical;
The details contain syntax in the form:
SIA Host Domain Name = value; SIA Contact Domain Name = value;
Number of Logical IP = value; Number of mapped log = value."
REFERENCE ""
::= { callAgentTraps 76 }
siaConfigValidOnlySimplex NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Current SIA configuration only valid for simplex
systems.
SIA host and contact parameters are the same in
platform.cfg file.
(or)
SIA is configured for use on a simplex system.
Threshold=100, Throttle=0, ReportIndex:108,
Category: signaling, Level:major;
The details contain syntax in the form:
SIA Host Domain Name = value; SIA Contact Domain Name = value."
REFERENCE ""
::= { callAgentTraps 77 }
sctpAssocFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SCTP Association Failure.
Threshold=100, Throttle=0, ReportIndex:109,
Category: signaling, Level:major;
The details contain syntax in the form:
SCTP Association ID = value."
REFERENCE ""
::= { callAgentTraps 78 }
sctpAssocDegraded NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SCTP Association Degraded (one of two IP connections
down).
Threshold=100, Throttle=0, ReportIndex:111,
Category: signaling, Level:minor;
The details contain syntax in the form:
SG Group ID = value."
REFERENCE ""
::= { callAgentTraps 79 }
sctpAssocConfigError NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SCTP Association Configuration Error.
Threshold=100, Throttle=0, ReportIndex:112,
Category: signaling, Level:minor;
The details contain syntax in the form:
SCTP Association ID = value; Destination IP Address = value."
REFERENCE ""
::= { callAgentTraps 80 }
signalingGWFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Signaling Gateway Failure.
Threshold=100, Throttle=0, ReportIndex:113,
Category: signaling, Level:major;
The details contain syntax in the form:
Signaling Gateway ID = value."
REFERENCE ""
::= { callAgentTraps 81 }
signalingGWOOS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Signaling Gateway Process is out-of-service.
Threshold=100, Throttle=0, ReportIndex:114,
Category: signaling, Level:major;
The details contain syntax in the form:
Signaling Gateway Process = value."
REFERENCE ""
::= { callAgentTraps 82 }
dpcUserPartUnavail NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "DPC User Part Unavailable.
Threshold=100, Throttle=0, ReportIndex:116,
Category: signaling, Level:major;
The details contain syntax in the form:
DPC ID = value."
REFERENCE ""
::= { callAgentTraps 83 }
cvtMsgRcvdUeqpCIC NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "CVT message received for an unequipped CIC.
Threshold=100, Throttle=0, ReportIndex:117,
Category: signaling, Level:minor;
The details contain syntax in the form:
cic = value; tgn id = value;
dpc = value."
REFERENCE ""
::= { callAgentTraps 84 }
cvrRcvdWIthFailure NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "CVR received with failed indication.
Threshold=100, Throttle=0, ReportIndex:118,
Category: signaling, Level:minor;
The details contain syntax in the form:
cic = value; tgn id = value;
dpc = value; opc = value."
REFERENCE ""
::= { callAgentTraps 85 }
s7AProcessFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "S7A process faulty.
Threshold=100, Throttle=0, ReportIndex:119,
Category: signaling, Level:critical;
The details contain syntax in the form:
Reason = value."
REFERENCE ""
::= { callAgentTraps 86 }
s7Ms7AFaulty NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "S7M/S7A faulty.
Threshold=100, Throttle=0, ReportIndex:120,
Category: signaling, Level:critical;
The details contain syntax in the form:
Reason = value."
REFERENCE ""
::= { callAgentTraps 87 }
m3uaCannotGoStandbyOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "M3UA Cannot Go Standby.
Threshold=100, Throttle=0, ReportIndex:121,
Category: signaling, Level:major;
There are no details associated."
REFERENCE ""
::= { callAgentTraps 88 }
m3uaCannotGoActiveOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "M3UA Cannot Go Active.
Threshold=100, Throttle=0, ReportIndex:122,
Category: signaling, Level:major;
There are no details associated."
REFERENCE ""
::= { callAgentTraps 89 }
trunkLocallyBlockedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Trunk locally blocked.
Issued when a BLO or CGB message was sent on the
specified CIC and TG.
Threshold=500, Throttle=0, ReportIndex:36,
Category: signaling, Level:minor;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { callAgentTraps 90 }
trunkRemotelyBlockedOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Trunk remotely blocked.
Issued when a BLO or CGB message was received on the
specified CIC and TG.
Threshold=500, Throttle=0, ReportIndex:40,
Category: signaling, Level:minor;
The details contain syntax in the form:
CIC Number = value; TGN-ID = value;
DPC = value; OPC = value."
REFERENCE ""
::= { callAgentTraps 91 }
destinationPointCodeUnavail NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Destination Point Code is unavailable.
Link loss or DPC equipment out of service.
Threshold=100, Throttle=0, ReportIndex:123,
Category: signaling, Level:minor,
The details contain syntax in the form:
Destination Point Code = value."
REFERENCE ""
::= { callAgentTraps 92 }
remoteSubsystemOOS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Remote subsystem is out of service.
Link loss or the remote subsystem out of service.
Threshold=100, Throttle=0, ReportIndex:124,
Category: signaling, Level:minor,
The details contain syntax in the form:
Destination Point Code = value;
Remote Subsystem Num = value."
REFERENCE ""
::= { callAgentTraps 93 }
sccpRountingErr NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SCCP routing error.
SCCP route invalid or not available.
Threshold=100, Throttle=0, ReportIndex:125,
Category: signaling, Level:major,
The details contain syntax in the form:
NONE."
REFERENCE ""
::= { callAgentTraps 94 }
sccpBindingFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SCCP Binding Failure.
Trillium stack binding failure.
Threshold=100, Throttle=0, ReportIndex:126,
Category: signaling, Level:major,
The details contain syntax in the form:
Local Point Code = value; Local Subsystem Numb = value."
REFERENCE ""
::= { callAgentTraps 95 }
tcapBindingFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "TCAP Binding Failure.
Trillium stack binding failure.
Threshold=100, Throttle=0, ReportIndex:127,
Category: signaling, Level:major,
The details contain syntax in the form:
NONE."
REFERENCE ""
::= { callAgentTraps 96 }
inapBindingFailureOld NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "INAP Binding Failure.
Trillium stack binding failure.
Threshold=100, Throttle=0, ReportIndex:128,
Category: signaling, Level:major,
The details contain syntax in the form:
Local Point Code = value; Local Subsystem Numb = value."
REFERENCE ""
::= { callAgentTraps 97 }
numOpenSIPConnReachingEngrLimit NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Number of open SIP connections is reaching
engineered limit.
System configuration and traffic load have caused
the number of open connections to approach the
engineered limit. This limit will need to be
increased to allow for more connections.
Threshold=100, Throttle=0, ReportIndex:138,
Category: signaling, Level:minor,
The details contain syntax in the form:
Number of SIP connections open = value;
SIP connection alarm threshold = value;
Open SIP connection limit = value."
REFERENCE ""
::= { callAgentTraps 98 }
releaseCause25ExchangeRoutingErrRcvd NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "Release Cause 25 Exchange Routing Error Received.
Received REL w/cause #25.
Threshold=100, Throttle=0, ReportIndex:38,
Category: call processing, Level:minor,
There are no details associated."
REFERENCE ""
::= { callAgentTraps 99 }
sipTrunkOperationallyOOS NOTIFICATION-TYPE
OBJECTS {
alarmSubsystem,
alarmServerity,
alarmID,
alarmComponentID,
alarmComponentType,
alarmDetails,
alarmTime,
alarmSetCleared
}
STATUS obsolete
DESCRIPTION "SIP trunk operationally out of service.
Issued when BTS10200 is unable to communicate with a
remote SIP party (Call-Agent or Proxy) over a SIP or
SIP-T trunk.
(or)
Remote SIP party is not operational.
Threshold=100, Throttle=0, ReportIndex:142,
Category: signaling, Level:critical,
The details contain syntax in the form:
Trunk Group ID = value; Trunk TSAP Address = value"
REFERENCE ""
::= { callAgentTraps 100 }
--
-- End of Obsoleted Trap Definitions
--
-- Conformance Information
opticallMIBConformance OBJECT IDENTIFIER ::= { opticall 7 }
opticallMIBGroups OBJECT IDENTIFIER ::= { opticallMIBConformance 1 }
opticallMIBCompliances OBJECT IDENTIFIER ::= { opticallMIBConformance 2 }
-- compliance statements
opticallMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that implement the
Opticall Call Agent MIB."
MODULE -- this module
MANDATORY-GROUPS {
callAgentStatCtrlGroup,
elementManagerStatCtrlGroup,
fsStatCtrlGroup
}
OBJECT callAgentOAMPPrimaryState
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT elementManagerOAMPPrimaryState
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
OBJECT featureServerOAMPPrimaryState
MIN-ACCESS read-only
DESCRIPTION
"It is conformant to implement this object as read-only."
GROUP mgwStatCtrlGroup
DESCRIPTION
"This group is optional."
GROUP trkGrpStatCtrlGroup
DESCRIPTION
"This group is optional."
GROUP subTermStatCtrlGroup
DESCRIPTION
"This group is optional."
GROUP trkTermStatCtrlGroup
DESCRIPTION
"This group is optional."
::= { opticallMIBCompliances 1 }
-- Units of Conformance
callAgentStatCtrlGroup OBJECT-GROUP
OBJECTS {
callAgentOAMPID,
callAgentOAMPPrimaryState,
callAgentOAMPSecondaryState
}
STATUS current
DESCRIPTION
"A collection of objects providing information the
Call Agent."
::= { opticallMIBGroups 1 }
elementManagerStatCtrlGroup OBJECT-GROUP
OBJECTS {
elementManagerOAMPID,
elementManagerOAMPPrimaryState,
elementManagerOAMPSecondaryState
}
STATUS current
DESCRIPTION
"A collection of objects providing information the
Element Manager."
::= { opticallMIBGroups 2 }
fsStatCtrlGroup OBJECT-GROUP
OBJECTS {
featureServerOAMPID,
featureServerOAMPPrimaryState,
featureServerOAMPSecondaryState
}
STATUS current
DESCRIPTION
"A collection of objects providing information the
Feature Servers."
::= { opticallMIBGroups 3 }
mgwStatCtrlGroup OBJECT-GROUP
OBJECTS {
mediaGatewayOAMPID,
mediaGatewayOAMPAdminState,
mediaGatewayOAMPOperState
}
STATUS current
DESCRIPTION
"A collection of objects providing information the
Media Gateways."
::= { opticallMIBGroups 4 }
trkGrpStatCtrlGroup OBJECT-GROUP
OBJECTS {
trunkGroupOAMPID,
trunkGroupOAMPCallAgentID,
trunkGroupOAMPAdminState,
trunkGroupOAMPOperState
}
STATUS current
DESCRIPTION
"A collection of objects providing information the
Trunk Groups."
::= { opticallMIBGroups 5 }
subTermStatCtrlGroup OBJECT-GROUP
OBJECTS {
subscrLineTermOAMPID,
subscrLineTermOAMPAdminState,
subscrLineTermOAMPOperState
}
STATUS current
DESCRIPTION
"A collection of objects providing information the
Subscriber Terminations."
::= { opticallMIBGroups 6 }
trkTermStatCtrlGroup OBJECT-GROUP
OBJECTS {
trunkTermOAMPTrunkGrpID,
trunkTermOAMPCIC,
trunkTermOAMPAdminState,
trunkTermOAMPOperState,
trunkTermOAMPStaticState,
trunkTermOAMPDynamicState
}
STATUS current
DESCRIPTION
"A collection of objects providing information the
Trunk Terminations."
::= { opticallMIBGroups 7 }
END