Table Of Contents
Configuring Cisco Unified Communications Manager for Phone Designer
How to Enable Personalization on Cisco Unified Communications Manager
Enabling Personalization for all Registered Phones
Enabling Personalization for all Phones in a Profile
Enabling Personalization for a Single Device
Verifying the Authentication URL
Configuring Cisco Unified Communications Manager for Phone Designer
August 14, 2008
•
How to Enable Personalization on Cisco Unified Communications Manager
•Verifying the Authentication URL
How to Enable Personalization on Cisco Unified Communications Manager
You can enable personalization for the Cisco Unified IP Phones on Cisco Unified Communications Manager at the following levels:
•At the enterprise level. You can enable personalization for all registered phones on the Cisco Unified Communications Manager. This is the global default setting. For the personalization setting to be enabled at the enterprise level, the profile level and the device level must be set to default.
•At the profile level. You can enable personalization for all phones within a common phone profile. If enabled, this setting overrides the enterprise level setting. For the personalization setting to be enabled at the profile level, the device level must be set to default.
•At the device level. You can enable personalization for a single phone. If enabled, this setting overrides the profile level setting.
•Enabling Personalization for all Registered Phones
•Enabling Personalization for all Phones in a Profile
•Enabling Personalization for a Single Device
Enabling Personalization for all Registered Phones
You can enable personalization at the enterprise level for all registered phones on the Cisco Unified Communications Manager server, unless this setting is overridden at the common phone profile or device level.
Procedure
Step 1 Select Cisco Unified CM Administration > System > Enterprise Parameters.
Step 2 Click 1 for the Phone Personalization parameter value.
Step 3 Click Save.
Step 4 Click Reset.
Related Topics
•Enabling Personalization for all Phones in a Profile
•Enabling Personalization for a Single Device
Enabling Personalization for all Phones in a Profile
You can enable personalization for all phones using the selected common phone profile, unless this setting is overridden at the device level.
Procedure
Step 1 Select Cisco Unified CM Administration > Device > Device Settings > Common Phone Profile.
Step 2 Click Find to display the common phone profiles.
Step 3 Click on the appropriate common phone profile.
Step 4 Click Enabled for the Phone Personalization parameter value.
Step 5 Click Save.
Step 6 Click Reset.
Related Topics
•Enabling Personalization for all Registered Phones
•Enabling Personalization for a Single Device
Enabling Personalization for a Single Device
Procedure
Step 1 Select Cisco Unified CM Administration > Device > Phone.
Step 2 Click Find to display the associated phones.
Step 3 Click on the appropriate phone.
Step 4 Click Enabled for the Phone Personalization parameter value.
Step 5 Click Save.
Step 6 Click Reset.
Related Topics
•Enabling Personalization for all Registered Phones
•Enabling Personalization for all Phones in a Profile
Verifying the Authentication URL
Before You Begin
Each Cisco Unified IP Phone must point its authentication URL to the default location of its Cisco Unified Communications Manager publisher server. The default authentication URL is http:\\cluster-publisher-address:8080\ccmcip\authenticate.jsp, where cluster-publisher-address is the IP address or FQDN (Fully Qualified Domain Name) of the Cisco Unified Communications Manager publisher.
The Authentication URL is set by default during Cisco Unified Communications Manager installation. If you have a Cisco Unified Communications Manager cluster, verify that the Authentication URL is pointing to the publisher server address.
Procedure
Step 1 Select Cisco Unified CM Administration > System > Enterprise Parameters > Phone URL Parameters > URL Authentication.
Step 2 Verify that the authentication URL points to the Cisco Unified Communications Manager publisher.
Tip You can verify the authentication URL on a Cisco Unified IP phone by pressing Settings > Device Configuration > HTTP Configuration > Authentication URL.
What To Do Next
Automatically Populating the Cisco Unified Communications Manager Server Address and Username, page 2-7
Feedback