Configuring SSIDs

Available Languages

Download Options

  • PDF     (169.6 KB)
    View with Adobe Reader on a variety of devices
Updated:June 29, 2007

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring SSIDs

Table Of Contents

Configuring SSIDs

Understanding SSIDs

Configuring the SSID

Default SSID Configuration

Creating an SSID


Configuring SSIDs

This chapter describes how to configure a service set identifier (SSID) on the access point/bridge. This chapter contains these sections:

•Understanding SSIDs

•Configuring the SSID

Understanding SSIDs

The SSID is a unique identifier that wireless networking devices use to establish and maintain wireless connectivity. Multiple access point/bridges on a network or sub-network can use the same SSID. SSIDs are case sensitive and can contain up to 32 alphanumeric characters. Do not include spaces in your SSID. The 1300 series access point/bridge supports multiple SSIDs.

When you configure an SSID you assign these configuration settings to the SSID:

•VLAN

•RADIUS accounting for traffic using the SSID

•Access Point/Bridge authentication method

Note For detailed information on client authentication types, see Chapter 10 "Configuring Authentication Types."

If you want the access point/bridge to allow associations from access point/bridges that do not specify an SSID in their configurations, you can include the SSID in the access point/bridge's beacon. The access point/bridge's default SSID, autoinstall, is included in the beacon. However, to keep your network secure, you should remove the SSID from the beacon.

You can assign an authentication username and password to the SSID to allow the access point/bridge to authenticate to your network using LEAP authentication.

If your network uses VLANs, you should assign the access point/bridge SSID to your network's native VLAN.

Configuring the SSID

These sections contain configuration information for the SSID:

•Default SSID Configuration

•Creating an SSID

Default SSID Configuration

Table 7-1 shows the default SSID configuration:

Table 7-1 Default SSID Configuration

Feature
Default Setting

SSID

autoinstall

Guest Mode SSID

autoinstall (The access point/bridge broadcasts this SSID in its beacon and allows access point/bridges with no SSID to associate.)


Creating an SSID

Beginning in privileged EXEC mode, follow these steps to create an SSID:

 
Command
Purpose

Step 1 

configure terminal

Enter global configuration mode.

Step 2 

interface dot11radio 0

Enter interface configuration mode for the radio interface.

Step 3 

ssid ssid-string

Create an SSID and enter SSID configuration mode for the new SSID. The SSID can consist of up to 32 alphanumeric characters. SSIDs are case sensitive.

Note You can include spaces in an SSID, but be careful not to add spaces to an SSID accidentally, especially at the end of an SSID.

Step 4 

authentication client
username username
password password

(Optional) Set an authentication username and password that the access point/bridge uses to authenticate to the network.

Step 5 

accounting list-name

(Optional) Enable RADIUS accounting for this SSID. For list-name, specify the accounting method list. Click this link for more information on method lists: http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/scfacct.html

Step 6 

vlan vlan-id

(Optional) Assign the SSID to a VLAN on your network. On your access point/bridge, you should assign the SSID to the native VLAN.

Step 7 

infrastructure-ssid

Designate the SSID as the infrastructure SSID. It is used to instruct a non-root access point/bridge or workgroup bridge radio to associate with this SSID.

Step 8 

end

Return to privileged EXEC mode.

Step 9 

copy running-config startup-config

(Optional) Save your entries in the configuration file.

Note You use the ssid command's authentication options to configure an authentication type for the SSID. See Chapter 10 "Configuring Authentication Types,"for instructions on configuring authentication types.

Use the no form of the command to disable the SSID or to disable SSID features.

This example shows how to:

•Name an SSID

•Configure the SSID for RADIUS accounting

•Assign the SSID to the native VLAN

•Designate the SSID as the infrastructure SSID 

bridge# configure terminal

bridge(config)# interface dot11radio 0

bridge(config-if)# ssid bridgeman

bridge(config-ssid)# accounting accounting-method-list

bridge(config-ssid)# vlan 1

bridge(config-ssid)# infrastructure-ssid

bridge(config-ssid)# end

 
   
 
    
  
 
  
  
 


    
    


















     

     
    
    








	




    


    

        





































    

    

        

    

    
    
     
			
            

























    
    
    
    









            

                

















  
  

  
    
    
    
    
  






            

        
            
            




















  
Was this Document Helpful?

  
    
    
  
  
    
      
      FeedbackFeedback
    
  







            

                

















  
    
  



            


            

                
















    
Contact Cisco