PDF(225.0 KB) View with Adobe Reader on a variety of devices
Updated:January 7, 2014
Document ID:1457308947253823
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Product Overview
Cisco
® integrated services routers offer a wide variety of WAN connectivity modules to accommodate the range of application needs in customer networks. The Cisco 1-Port BRI U High-Speed WAN Interface Card (HWIC, Figure 1) offers BRI-U-based WAN connectivity for modular routers deployed in small to medium-sized businesses (SMBs) and enterprise branch offices.
Figure 1. Cisco 1-Port BRI U interface High-Speed WAN Interface Card
Features
• One ISDN BRI port with U interface (built-in NT1)
• Utilizes an RJ-49C connector
Benefits
Integration
The Cisco 1-Port HWIC-1B-U offers a single ISDN BRI port with U interface. The ISDN HWIC is supported on the Cisco 1841, 1941, 2800, 2900, 3800 and 3900 Series Routers. It provides a cost-effective ISDN routing solution with the following benefits of integration:
• Fewer devices and cables to deploy and manage
• Remote and local configuration, monitoring, and troubleshooting with the Cisco IOS® Software command-line interface (CLI) and Simple Network Management Protocol (SNMP)
• Single-vendor support
• Enhanced reliability
• Physical space savings
Flexibility and Investment Protection
The Cisco 1-Port ISDN U interface HWIC upholds Cisco's commitment to providing customers with maximum flexibility and investment protection through modular HWICs that are supported on award-winning router platforms. When WAN bandwidth requirements or service provider pricing changes, users can easily change WAN services either by changing the software configuration or replacing the HWIC. Because the same card can be used on Cisco 1841, 2800, and 3800 Series router platforms, the number of stocking units can be reduced, and the HWIC can be redeployed from one platform to another.
Enhanced Reliability
An integrated solution has fewer components and hence, fewer points of failure (for example, one less power supply and fewer cables). This leads to enhanced reliability.
Converged Platform for SMB and Enterprise Branch Applications
The Cisco 1841, 1941, 2800, 3800, and 3900 Series Integrated Services Routers with the Cisco 1-Port ISDN U interface HWIC provide customers with a choice of converged platforms that offer best-of-class data, security, WAN access, and voice services in a single system. The Cisco 2800 and 3800 Series routers and the Cisco 2900 and 3900 Series Routers embed voice functions directly inside the router, enabling customers to deploy voice services by installing digital signal processors (DSPs) and advanced integration modules (AIMs) for IP telephony conferencing, voice gateways, and Cisco Unity® Express voicemail and automated attendant. For call processing, customers can enable the Cisco Communications Manager Express solution as part of Cisco IOS Software and reconfigure the same software to support Cisco Survivable Remote Site Telephony (SRST) for centralized call processing with Cisco Communications Manager. Such an integrated solution enables rapid service deployment, increases efficiency of network operations, and provides opportunities to protect, grow, and optimize your business.
Shared Features with Cisco 1-Port ISDN WIC
The Cisco 1-Port ISDN U interface HWIC offers all of the features of the Cisco 1-Port ISDN U interface WIC (WIC-1B-U-V2) and can be smoothly deployed without any additional training.
Table 1. Comparison Between WIC and HWIC
Cisco 1-Port ISDN WIC
Cisco 1-Port ISDN HWIC
One ISDN BRI port (U interface, integrated NT1)
One ISDN BRI port (U interface, integrated NT1)
Supported on Cisco 1841, 2800, and 3800 Series
Supported on Cisco 1841, 2800, 3800, 1941, 2900, and 3900 Series
Supported in NM-1FE2W-V2, NM-1FE1R2W, NM-2FE2W-V2, and NM-2W
Supported in NM-1FE2W-V2, NM-1FE1R2W, NM-2FE2W-V2, and NM-2W
Product Specifications
Platform Support
Table 2 lists the routing platforms that support the Cisco 1-Port ISDN HWIC and WIC.
When installed in a Cisco 1841, 2800, or 3800 Series Integrated Services Router, the Cisco 1-Port ISDN HWIC does not change the standards (safety, EMC, telecom, network homologation, power, environmental requirements, and regulatory approvals) of the router itself. Refer to the following data sheets for additional information about mechanical, environmental, and agency certifications.
Services from Cisco and our certified partners can help you transform the branch experience and accelerate business innovation and growth in the Borderless Network. We have the depth and breadth of expertise to create a clear, replicable, optimized branch footprint across technologies. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help improve operational efficiency, save money, and mitigate risk. Optimization services are designed to continuously improve performance and help your team succeed with new technologies. For more information, visit
http://www.cisco.com/go/services.
For More Information
For more information about the Cisco 1-Port BRI U interface High-Speed WAN Interface Card, visit
http://www.cisco.com or contact your local account representative.
For more information about Cisco products, contact: