Product Bulletin No. EOL5039
Cisco Systems® announces the end-of-sale and end-of-life dates for the Cisco® ONS 15454 MSPP Universal BackPlane Interface Adapter, Vertical Orientation, and its DS1 and DS3 Cables. The last day to order the affected product is September 30, 2007. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 in EoL product bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the Cisco ONS 15454 MSPP Universal BackPlane Interface Adapter, Vertical Orientation, and Its DS1 and DS3 Cables. Table 2 lists the product part numbers affected by this announcement.
The recommended replacement is the Universal BackPlane Interface Adapter, horizontal orientation. Horizontal orientation enables better cable management because the cables can be dressed directly out toward the side of the shelf and then up or down the rack. Customers who migrate or select the horizontal orientation can select from a greater range of cable length offerings, specifically 11 for DS1 and 13 for DS3. The cable lengths range from 25 to 655 feet for the DS1 and 25 to 450 feet for the DS3.
Table 1. End-of-Life Milestones and Dates for the Cisco ONS 15454 MSPP Universal BackPlane Interface Adapter, Vertical Orientation, and Its DS1 and DS3 Cables
Milestone |
Definition |
Date |
End-of-Life Announcement Date |
The date the document that announces the end of sale and end of life of a product is distributed to the general public. |
September 30, 2006 |
End-of-Sale Date |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
September 30, 2007 |
Last Ship Date: HW |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
December 30, 2007 |
End of Routine Failure Analysis Date: HW |
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect. |
September 29, 2008 |
End of New Service Attachment Date: HW |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
September 29, 2008 |
End of Service Contract Renewal Date: HW |
The last date to extend or renew a service contract for the product. |
December 29, 2011 |
Last Date of Support: HW |
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
September 28, 2012 |
HW = Hardware OS SW = Operating System Software App SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product PartNumber |
Product Description |
Replacement Product PartNumber |
Replacement Product Description |
15454-CADS1-V-ID= |
DS1Cable Assembly – 250 ft |
15454-CADS1-H-250= |
DS1 Cable Assembly, UBIC-H – 250 ft |
15454-CADS1-V-LD= |
DS1Cable Assembly – 655 ft |
15454-CADS1-H-655= |
DS1 Cable Assembly, UBIC-H – 655 ft |
15454-CADS1-V-SD= |
DS1Cable Assembly – 150 ft |
15454-CADS1-150= |
Cable assy, DS1 HD conn, UTP |
15454-CADS3-V-ID= |
DS3 Cable Assembly – 225 ft |
15454-CADS3-H-225= |
DS3 Cable Assembly, UBIC-H – 225 ft |
15454-CADS3-V-LD= |
DS3 Cable Assembly – 450 ft |
15454-CADS3-H-450= |
DS3 Cable Assembly, UBIC-H – 450 ft |
15454-CADS3-V-SD= |
DS3 Cable Assembly – 75 ft |
15454-CADS3-H-75= |
DS3 Cable Assembly, UBIC-H – 75 ft |
15454-EIA-UBICV-A |
Universal BackPlane Interface Adaptor – A side |
15454-EIA-UBICH-A |
Universal Backplane Interface w/ Horizontal Connector – A Side |
15454-EIA-UBICV-A= |
Universal BackPlane Interface Adaptor – A side |
15454-EIA-UBICH-A= |
Universal Backplane Interface w/ Horizontal Connector – A Side |
15454-EIA-UBICV-B |
Universal BackPlane Interface Adaptor – B side |
15454-EIA-UBICH-B |
Universal Backplane Interface w/ Horizontal Connector – B Side |
15454-EIA-UBICV-B= |
Universal BackPlane Interface Adaptor – B side |
15454-EIA-UBICH-B= |
Universal Backplane Interface w/ Horizontal Connector – B Side |
proDuct migration options
The recommended replacement for the Cisco ONS 15454 MSPP Universal BackPlane Interface Adapter, Vertical Orientation, and its DS1 and DS3 Cables is the Cisco ONS 15454 MSPP Universal BackPlane Interface Adapter, Horizontal Orientation, and Its DS1 and DS3 Cables.
Customers are encouraged to migrate to the adapter with horizontal orientation. Information about this product can be found at: http://www.cisco.com/en/US/products/hw/optical/ps2006/index.html. Horizontal orientation enables better cable management, and the replacement adapter gives customers a greater selection of cable lengths as well as reduced cable costs.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the end-of-sale product through the Cisco Authorized Refurbished Equipment program. Refurbished units of the end-of-sale product are available in limited supply for sale in certain countries on a first-come, first-served basis. For information about the refurbished equipment program, go to: http://www.cisco.com/web/ordering/ciscocapital/or6/or17/order_refurbished_equipment_high_level_listing.html.
For More Information
For more information about the Cisco ONS 15454 MSPP Universal BackPlane Interface Adapter, Vertical Orientation, and Its DS1 and DS3 Cables, visit http://www.cisco.com/en/US/products/hw/optical/ps2006/prod_eol_notices_list.html, contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/prod_end_of_life.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cgi-bin/Support/FieldNoticeTool/field-notice.