The Cisco® 7600 Series Ethernet Services Plus Extended Transport (ES Plus XT) Line Cards allow service prioritization for voice, video, data, and wireless mobility services and can connect to LAN, WAN, and Optical Transport Network Physical Layer (OTN PHY) interfaces. Service providers and enterprises benefit from the efficiency gains in power consumption, improved economics from higher density, as well as advanced Carrier Ethernet features, which can be transported using G.709 and Forward Error Correction (FEC) across dense wavelength-division multiplexing (DWDM) networks, enabling optical links to span greater distances.
The ES Plus XT cards use an architecture first developed for the Cisco 7600 Series ES Plus card family, with programmable interface processors that protect network investments and reduce total cost of ownership. The extensible design maximizes connectivity options and offers superior service intelligence through programmable interface processors operating at line rate. This data sheet contains the specifications for the Cisco 7600 ES+ Series Line Cards as shown in Figure 1.
Figure 1. Cisco 7600 Series ES Plus XT Line Cards: 4-Port 10 GE and 2-Port 10 GE
Product Overview
Designed for interface flexibility and IP-over-DWDM integration in Carrier Ethernet, IP/Multiprotocol Label Switching (MPLS) provider edge, and WAN/MAN applications, the Cisco 7600 Series ES Plus XT Line Cards support up to 40 Gbps of bandwidth with four ports of 10 Gigabit Ethernet interfaces, or 20 Gbps with two ports of 10 Gigabit Ethernet. The cards feature hierarchical quality of service (QoS), locally significant VLANs, and up to 16,000 VLAN IDs per line card for rich services at scale. The cards provide the unique ability to combine both Layer 2 and Layer 3 services on the same line card. The combination of native Ethernet Layer 2 switching, bridging, Virtual Private LAN Services (VPLS), Ethernet over MPLS (EoMPLS), and Layer 3 IP/MPLS routing distinguishes this line card among other products on the market, particularly in Carrier Ethernet applications.
Additionally, the line cards have integrated G.709 Generic Forward Error Correction (available with the purchase of the 76-ES+OTN/G.709 license) to span regional distances with integration directly into OTN devices such as the Cisco ONS 15454 Multiservice Transport Platform (MSTP) or core routers such as the Cisco CRS-1 Carrier Routing System. The ability to span even greater distances between Cisco 7600 Series Routers is supported with Enhanced Forward Error Correction (EFEC) in the ES Plus XT cards (back-to-back ES Plus XT connections). Operations, administration, and maintenance (OA&M) capabilities are supported in both OTN and WAN PHY interface controller modes, providing insight into link quality and data transmission health.
The innovative architecture of these industry-leading, premium Ethernet services line cards is designed to deliver cost-effective high-touch features, combining both application-specific integrated circuit (ASIC) and network processor technology for optimal performance and flexibility. The Cisco 7600 Series ES Plus XT Line Cards provide distributed forwarding with proven ASIC technology in the forwarding path (routing, switching, NetFlow, access control lists [ACLs]), and queuing and shaping functions to optimize the performance of these foundational features. Additionally, four (for the ES Plus XT 40G line cards) or two (for the ES Plus XT 20G line cards) programmable network processors are included in the forwarding plane to facilitate flexibility and feature growth. This ideal technology combination provides customers with the necessary flexibility for future service deployments and allows them to scale the system capacity as required.
Key Features and Benefits
Table 1. Key Features and Benefits of the Cisco 7600 Series ES Plus XT Line Cards
Provides line-rate forwarding performance on GE and 10 GE interfaces with services enabled
Packet memory
512 MB
Up to 200 ms combined bidirectional buffering
Switch fabric connectivity
Two 20-Gbps fabric channels
Utilizes the Cisco 7600 Series 720-Gbps switch fabric for data forwarding; 2 fabric channels are utilized that are not present in slots 1 through 8 on the Cisco 7613 chassis
Online insertion and removal (OIR)
Supports OIR of the line cards
Provides hitless OIR to minimize impact of add/change/remove operations
Product Specifications
Table 2. Product Specifications
Description
Specification
Chassis compatibility
All Cisco 7600 Series Router chassis, except the Cisco 7603, which is end of sale/end of life. The Cisco 7603-S is fully supported.
ES Plus line cards require dual-channel switch fabric connectivity; therefore, the cards are not supported with the Supervisor Engine 32 or in slots 1 through 8 of the Cisco 7613 chassis.
Distributed forwarding card (DFC)
Choice of Cisco Distributed Forwarding Card 3C (DFC-3C) or DFC-3CXL
Line-rate distributed forwarding with services enabled, up to ~48 Mpps per line card
DFC-3C
• Designed for Carrier Ethernet-based infrastructures
• Up to 256,000 hardware-based forwarding entries with DFC-3C
• Up to 128,000 NetFlow entries with DFC-3C
DFC-3CXL
• Optimized for IP/MPLS provider edge offering multiple IP services such as Layer 3 VPNs, IPv6, and triple- or quad-play services
• Up to 1 million hardware-based forwarding entries with DFC-3CXL
• Up to 256,000 NetFlow entries with DFC-3CXL
Minimum software
Cisco IOS® Software Release 12.2SRD1 or later
Packet memory
512 MB for 200 ms of combined input and output buffering at 10 Gbps
Link encapsulations
Ethernet II and IEEE 802.1q encapsulations
Hardware queues
ES Plus XT 40G line cards
• 128,000 ingress queues
• 256,000 egress queues
ES Plus XT 20G line cards
• 64,000 ingress queues
• 128,000 egress queues
Hierarchical QoS (H-QoS)
MAC addresses
Up to 80,000 MAC addresses per ES Plus XT line card
16,000 VLAN IDs per line card (within Flexible QinQ configuration guidelines)
Hardware-based MAC learning at wire rate
Environmental conditions
Operating temperature: 32 to 104°F (0 to 40°C)
Storage temperature: -40 to 167°F (-40 to 75°C)
Relative humidity: 10 to 90 percent, noncondensing
Operating altitude: -60 to 2000m
MIBs
Cisco Optical Transport Network MIB (CISCO-OTN-MIB)
Cisco Entity MIB (CISCO-ENTITY-MIB)
Cisco Entity Asset MIB
Cisco Entity Field-Replaceable Unit (FRU) Control MIB
Cisco Entity Alarm MIB
Interface IF MIB (RFC 2233)
Definitions of Managed Objects for Bridges (RFC 1493)
Evolution of Interfaces Group of MIB-II (RFC 1573)
Simple Network Management Protocol (SNMP) MIB II (RFC 1213)
Table 8. ES Plus Line Card XFP and SFP Modules Supported
Part Number for ES Plus Line Cards 10-Gbps Small Form-Factor Pluggable (XFP)
Wavelength
Mode
Distance
XFP-10GZR-OC192LR, LAN-PHY
1550 nm
Single mode (SM)
49.7 miles (80 km)
XFP-10GER-OC192IR+, LAN-PHY
1550 nm
SM
24.8 miles (40 km)
XFP-10GLR-OC192SR, LAN-PHY
1310 nm
SM
6.2 miles (10 km)
Table 9. Ordering Information for Cisco ES Plus Line Cards 10 GE Dense Wavelength-Division Multiplexing (DWDM) XFP Modules Note: The following DWDM XFP products are orderable as spares only.
Product Number
Description
ITU Channel
DWDM-XFP-60.61=
10GBASE-DWDM 1560.61 nm XFP (100-GHz ITU grid)
21
DWDM-XFP-59.79=
10GBASE-DWDM 1559.79 nm XFP (100-GHz ITU grid)
22
DWDM-XFP-58.98=
10GBASE-DWDM 1558.98 nm XFP (100-GHz ITU grid)
23
DWDM-XFP-58.17=
10GBASE-DWDM 1558.17 nm XFP (100-GHz ITU grid)
24
DWDM-XFP-56.55=
10GBASE-DWDM 1556.55 nm XFP (100-GHz ITU grid)
26
DWDM-XFP-55.75=
10GBASE-DWDM 1555.75 nm XFP (100-GHz ITU grid)
27
DWDM-XFP-54.94=
10GBASE-DWDM 1554.94 nm XFP (100-GHz ITU grid)
28
DWDM-XFP-54.13=
10GBASE-DWDM 1554.13 nm XFP (100-GHz ITU grid)
29
DWDM-XFP-52.52=
10GBASE-DWDM 1552.52 nm XFP (100-GHz ITU grid)
31
DWDM-XFP-51.72=
10GBASE-DWDM 1551.72 nm XFP (100-GHz ITU grid)
32
DWDM-XFP-50.92=
10GBASE-DWDM 1550.92 nm XFP (100-GHz ITU grid)
33
DWDM-XFP-50.12=
10GBASE-DWDM 1550.12 nm XFP (100-GHz ITU grid)
34
DWDM-XFP-48.51=
10GBASE-DWDM 1548.51 nm XFP (100-GHz ITU grid)
36
DWDM-XFP-47.72=
10GBASE-DWDM 1547.72 nm XFP (100-GHz ITU grid)
37
DWDM-XFP-46.92=
10GBASE-DWDM 1546.92 nm XFP (100-GHz ITU grid)
38
DWDM-XFP-46.12=
10GBASE-DWDM 1546.12 nm XFP (100-GHz ITU grid)
39
DWDM-XFP-44.53=
10GBASE-DWDM 1544.53 nm XFP (100-GHz ITU grid)
41
DWDM-XFP-43.73=
10GBASE-DWDM 1543.73 nm XFP (100-GHz ITU grid)
42
DWDM-XFP-42.94=
10GBASE-DWDM 1542.94 nm XFP (100-GHz ITU grid)
43
DWDM-XFP-42.14=
10GBASE-DWDM 1542.14 nm XFP (100-GHz ITU grid)
44
DWDM-XFP-40.56=
10GBASE-DWDM 1540.56 nm XFP (100-GHz ITU grid)
46
DWDM-XFP-39.77=
10GBASE-DWDM 1539.77 nm XFP (100-GHz ITU grid)
47
DWDM-XFP-38.98=
10GBASE-DWDM 1538.98 nm XFP (100-GHz ITU grid)
48
DWDM-XFP-38.19=
10GBASE-DWDM 1538.19 nm XFP (100-GHz ITU grid)
49
DWDM-XFP-36.61=
10GBASE-DWDM 1536.61 nm XFP (100-GHz ITU grid)
51
DWDM-XFP-35.82=
10GBASE-DWDM 1535.82 nm XFP (100-GHz ITU grid)
52
DWDM-XFP-35.04=
10GBASE-DWDM 1535.04 nm XFP (100-GHz ITU grid)
53
DWDM-XFP-34.25=
10GBASE-DWDM 1534.25 nm XFP (100-GHz ITU grid)
54
DWDM-XFP-32.68=
10GBASE-DWDM 1532.68 nm XFP (100-GHz ITU grid)
56
DWDM-XFP-31.90=
10GBASE-DWDM 1531.90 nm XFP (100-GHz ITU grid)
57
DWDM-XFP-31.12=
10GBASE-DWDM 1531.12 nm XFP (100-GHz ITU grid)
58
DWDM-XFP-30.33=
10GBASE-DWDM 1530.33 nm XFP (100-GHz ITU grid)
59
Licensing Information
Cisco 7600 Series ES Plus Basic IP License
The ES Plus line cards have two feature license options, with the following part numbers: 76-ES+BASIC-LIC (Basic license, including IPv6) and 76-ES+ADVIP-LIC (Advanced IP license).
The Basic license entitles you to use the Cisco IOS Software Release 12.2SR functions on the Cisco 7600 ES Plus line cards with the following exceptions:
• Multicast VPN (MVPN)
• Layer 3 IP/MPLS VPN/6VPE
• Cisco Intelligent Services Gateway (ISG)
Cisco 7600 Series ES Plus Advanced IP License
The Advanced IP license entitles you to use Cisco IOS Software Release 12.2SR on the Cisco 7600 Series ES Plus Line Cards with the following functions in addition to the Basic license:
• 6VPE
• Layer 3 IP/MPLS VPN
• MVPN
• One Advanced IP license is needed for each of the ES Plus line cards in the system where these features are enabled.
The Advanced IP license does not entitle you to use features contained in the Optical Transport Network, Intelligent Services Gateway, or Video Services Licenses on the Cisco 7600 Series ES Plus Line Cards.
Cisco 7600 Series ES Plus Optical Transport Network License
The Optical Transport Network license (part number 76-ES+OTN-LIC) is available for purchase when the OTN capability (G.709/FEC/EFEC) is to be used, and is required on each line card where OTN will be enabled.
Cisco 7600 Series ES Plus Intelligent Services Gateway License
The Intelligent Services Gateway license (part number 76-ES+ISG-LIC) entitles use of Cisco IOS Software Release 12.2SR on the Cisco 7600 Series ES Plus Line Cards with the following functions:
• The 76-ES+ISG-LIC is purchased per chassis in increments of 8000 subscribers with 8 MPLS VPNs per license.
Ordering Information
Table 10. Ordering Information
Product Description
Part Number
Cisco 7600 Series ES Plus XT, LAN/WAN PHY, OTN/G.709, 2x10GE, XFP, DFC3C
76-ES+XT-2TG3C
Cisco 7600 Series ES Plus XT, LAN/WAN PHY, OTN/G.709, 2x10GE, XFP, DFC3CXL
76-ES+XT-2TG3CXL
Cisco 7600 Series ES Plus XT, LAN/WAN PHY, OTN/G.709, 4x10GE, XFP, DFC3C
76-ES+XT-4TG3C
Cisco 7600 Series ES Plus XT, LAN/WAN PHY, OTN/G.709, 4x10GE, XFP, DFC3CXL
76-ES+XT-4TG3CXL
Cisco 7600 Series Ethernet Services Plus Basic License
76-ES+BASIC-LIC
Cisco 7600 Series Ethernet Services Plus Advanced License
76-ES+ADVIP-LIC
Cisco 7600 Series ES Plus OTN PHY (G.709/FEC/EFEC) License
76-ES+OTN-LIC
Cisco 7600 Series Ethernet Services Plus Intelligent Services Gateway License
76-ES+ISG-LIC
To Download the Software
Visit the Cisco Software Center to download Cisco IOS Software Release 12.2(33)SRD1 for use with the Cisco 7600 Series Supervisor Engine 720 or Route Switch Processor 720.
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your business. For more information about Cisco Services, see Cisco Technical Support Services or Cisco Advanced Services.
For More Information
For more information about the Cisco 7600 Series ES Plus XT 20G and 40G Line Cards, visit http://www.cisco.com/ or contact your local account representative.