The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The Cisco Nexus® 7700 F3-Series 48-Port Fiber 1 and 10 Gigabit Ethernet Module (referred to as the 7700 F3-Series module in this document) offers wire-rate performance on each port. As a result, enterprises can use it to deploy a high-density, low-latency, scalable architecture for powering a mission-critical data center.
Powering Cisco Unified Fabric Architecture
The Cisco Nexus 7000 Series Switches are the foundation of the Cisco® Unified Fabric solution. The switches deliver exceptional availability and scalability and run the proven and comprehensive Cisco NX-OS Software data center switching feature set. The Cisco Nexus 7700 platform is the latest extension to the 7000 Series modular switches. With more than 83 Terabits per second (Tbps) of overall switching capacity, the 7700 platform delivers the highest-capacity 10, 40, and 100 Gigabit Ethernet ports in the industry, with up to 768 native 10-Gbps ports, 384 40-Gbps ports, and 192 100-Gbps ports. This high system capacity is designed to meet the scalability requirements of the largest cloud environments.
The 7700 platform’s operation and features are consistent with the existing 7000 Series switches. Both platforms use the same system architecture, the same Application-Specific Integrated Circuit (ASIC) technology, and the same proven NX-OS releases.
The 7700 F3-Series module (Figure 1) is a low-latency, high-performance, high-density 1 and 10 Gigabit Ethernet module designed for the 7700 platform. It delivers up to 768 wire-rate 10 Gigabit Ethernet ports in a single Cisco Nexus 7700 18-Slot Switch chassis (Table 1).
Cisco Nexus 7700 F3-Series Module
Table 1. Cisco Nexus 7700 Platform Switches 10 Gigabit Ethernet Maximum Port Density
Cisco Nexus 7700 Chassis |
|
Cisco Nexus 7700 6-Slot Switch |
192 |
Cisco Nexus 7700 2-Slot Switch |
48 |
The 7700 F3-Series module is based on the Cisco Nexus F3-Series Switch-on-a-Chip (SoC) ASIC. This type of design increases performance while lowering the power and cooling requirements of the module. The F3-Series SoC is an innovative ASIC designed by Cisco and powered by a flexible packet engine that makes it particularly suitable for building the network infrastructure of public and private cloud environments. The F3-Series engine supports all the foundational networking protocols needed to build Layer 2 and Layer 3 networks, but it also can support highly virtualized environments. It can thus enable virtual overlay networking with hardware support for Cisco Virtual Extensible LAN (VXLAN) and Locator/ID Separation Protocol (LISP) technologies. The 7700 F3-Series hardware enables customers to transparently interconnect their data centers with protocols such as Overlay Transport Virtualization (OTV) and Multiprotocol Label Switching (MPLS) and Virtual Private LAN Service (VPLS).
The module delivers 720 million packets per second (mpps) of distributed Layer 2 and Layer 3 forwarding and up to 480 Gbps of data throughput. A 7700 18-Slot Switch fully populated with the 7700 F3-Series module can deliver up to 11.5 billion packets per second (bpps) and 15.4 terabits per second (Tbps) of switching performance.
The 7700 F3-Series module integrates a broad set of data center switching technologies, including industry standards and Cisco's own innovations. It combines the benefits of classic fabric interface line cards with the advanced routing features of edge interface modules. With this integration, the module provides exceptional investment protection for organizations consolidating their data center environments while migrating to dense, multiservice 10 Gigabit Ethernet networks.
● The 7700 F3-Series module is powered by the proven and comprehensive NX-OS feature set. This extremely comprehensive set of Layer 2 and Layer 3 functions makes this module excellent for data center networks, in which density, performance, and continuous system operation are critical.
● The 7700 F3-Series module is a critical enabler of Cisco FabricPath. With FabricPath, organizations can build resilient, flexible, and if needed, massively scalable Layer 2 networks. FabricPath protects enterprises' investments by allowing existing spanning-tree-based deployments to be connected to a FabricPath network.
● The 7700 F3-Series module can be used in conjunction with the Cisco Nexus 2000 Series Fabric Extenders (FEX). The 2000 Series is designed to simplify data center architecture and operations by dramatically reducing the number of points of management.
● The 7700 F3-Series module delivers integrated Fibre Channel over Ethernet (FCoE), greatly simplifying the network infrastructure and reducing costs by enabling the deployment of unified data center fabrics to consolidate data center traffic onto a single, general-purpose, high-performance, highly available network. With the 7700 F3-Series module, FCoE can be deployed in director-class modular platforms for the access layer and core of converged networks.
● The 7700 F3-Series module provides support for wire-rate VXLAN, offering the architectural flexibility needed to expand cloud deployments with repeatable pods in different Layer 2 domains. VXLAN can also enable migration of virtual machines between servers across Layer 3 networks.
● The support of advanced Data Center Interconnect (DCI) protocols such as Cisco OTV and VPLS makes the module excellent for helping customers simplify the extension of applications across geographically dispersed data center sites.
● The 7700 F3-Series module supports high-performance MPLS for 10 Gigabit Ethernet data center deployments.
● Support for Cisco LISP enables enterprises and service providers to simplify multihomed routing and facilitates scalable any-to-any WAN connectivity while supporting data center virtual machine mobility.
● The Virtual Device Context (VDC) feature helps enable the virtualization of a single physical device in one or more logical devices. Each provisioned logical device is configured and managed as if it were a separate physical device.
● The 7700 F3-Series module offers exceptional security with integrated hardware support for:
◦ Configurable Control-Plane Policing (CoPP), which protects the supervisor CPU from excessive traffic
◦ Access Control List (ACL) counters and logging capability to provide deeper packet visibility
◦ Layer 2 to Layer 4 ACL for both IPv4 and IPv6 traffic
◦ Cisco TrustSec® technology, including line-rate data confidentiality, data integrity, and ACL processing for Security Group Tags (SGTs); data confidentiality and integrity conforming to the IEEE MAC security standard (IEEE 802.1AE MACsec) is supported on a subset of ports: more specifically, ports 41 to 48 (the rightmost eight ports) on the module support the Advanced Encryption Standard (AES) cipher, using a 128-bit key
Note: TrustSec SGT on the F3 Series Modules: F3 Series I/O modules require a dot1q header to be present for proper processing and transport of SGT-tagged packets. For Layer 2 switch ports use trunked interfaces instead of an access VLAN. Layer 3 interfaces should be configured as an L3 subinterface to force the dot1q over the L3 interconnection.
Note: This document describes capabilities of the F3-Series module hardware. Please consult your Cisco representative to confirm the appropriate NX-OS release required to enable these features.
Table 2 lists product specifications for the 7700 F3-Series module. Tables 3 and 4 list specifications for Cisco transceivers installed in the module's Small Form-Factor Pluggable (1-Gbps SFP and 10-Gbps Enhanced SFP [SFP+]) ports to enable connectivity over multimode fiber (MMF), Single-Mode Fiber (SMF), or copper cabling. Refer to the release notes for up-to-date software version information to see which optics and copper assemblies are supported. Complete information about supported transceivers can be found at https://www.cisco.com/en/US/products/hw/modules/ps5455/prod_models_home.html.
Table 2. Product specifications
Table 3. 10 Gigabit Ethernet interface distances and options
10 Gigabit Ethernet SFP+ Part Number |
Model Bandwidth (MHz per km)1 |
Cable Distance2 |
|||
● SMF
|
● G.652
|
● -
|
● 300m
|
||
SFP-10G-LR |
● 1310
|
● SMF
|
● 10 km
|
||
FET-10G |
● 850
|
● MMF (OM2)
● MMF (OM3, OM4)
|
● 50
● 50
|
● 500
● 2000
|
● 25m
● 100m
|
SFP-10G-ER8 |
● 1550
|
● SMF
|
● G.652
|
● -
|
● 40 km
3
|
SFP-10G-ZR |
● 1550
|
● SMF
|
● G.652
|
● -
|
● 80 km
|
DWDM-SFP10G-xx.xx= |
● -
|
● -
|
|||
Table 4. Gigabit Ethernet interface distances and options
Gigabit Ethernet SFP Part Number |
|||||
Note: This data sheet describes the hardware capabilities of the Cisco Nexus 7700 F3-Series 48-Port module. Please refer to the Cisco NX-OS Software release notes (https://www.cisco.com/c/en/us/support/switches/nexus-7000-series-switches/products-release-notes-list.html) or consult your Cisco representative to confirm the current or future NX-OS release required for any of these features.
To place an order, visit the Cisco Ordering homepage. To download software, visit the Cisco Software Center. Table 5 provides ordering information.
Table 5. Ordering information
Description |
Part Number |
Nexus 7700 F3-Series 48-Port Fiber 1 and 10G Ethernet Module (req. SFP/SFP+ modules) |
N77-F348XP-23 N77-F348XP-23= |
Fibre Channel over Ethernet (FCoE) for Cisco Nexus 7700 F3 Series 48-port 10-Gigabit Ethernet SFP+ module (and spare) |
N77-FCOE-F348XP N77-FCOE-F348XP= |
Cisco offers a wide range of services to help accelerate your success in deploying and optimizing the Cisco Nexus 7700 platform in your data center. Our innovative services are delivered through a unique combination of people, processes, tools, and partners and are focused on helping you increase operating efficiency and improve your data center network. Cisco Advanced Services uses an architecture-led approach to help you align your data center infrastructure with your business goals and provide long-term value. Cisco Smart Net Total Care™ Service helps you resolve mission-critical problems with direct access at any time to Cisco network experts and award-winning resources. With this service, you can take advantage of the Cisco Smart Call Home service capability, which offers proactive diagnostics and real-time alerts on your 7700 platform switch. Spanning the entire network lifecycle, Cisco Services helps increase investment protection, optimize network operations, support migration, and strengthen your IT expertise. For more information about Cisco Data Center Services, visit https://www.cisco.com/go/dcservices.
Flexible payment solutions to help you achieve your objectives
Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and complementary third-party equipment in easy, predictable payments. Learn more.
For more information about the Cisco Nexus 7700 platform, visit the product homepage at https://www.cisco.com/go/nexus or contact your local account representative.