Document ID: 17698
Contents - Device Test Switch Settings
Note: Settings marked with an asterisk ( * ) may erase your Flash ROM.
Please do not use these settings without first contacting technical support.
12xx and 22xx series MicroRouters
2600i, 3500R, 4000S RISC Routers
IntraPort VPN Access Servers
IntraGuard Firewall, and VSR with
Operating System software v5.0 and later
| Switch Setting | Function |
| 0 | Normal Operation |
| 1 | Unused * |
| 2 | Unused * |
| 3 | Run Boot ROM Downloader |
| 4 | Unused * |
| 5 | Erase Flash ROM (OS and configuration) |
| 6 | Erase Flash ROM (configuration only) |
| 7 | Unused * |
| 8 | Bypass boot-up to create a console connection * |
| 9 | Allow letmein password for 5 minutes after powerup |
12xx and 22xx series MicroRouters
2600i, 2800i, 2900i, 3400R, 3500R, 3800R, 4000S RISC Routers
IntraPort VPN Access Servers
IntraGuard Firewall, and VSR with
Operating System software prior to v5.0
| Switch Setting | Function |
| 0 | Normal Operation |
| 1 | Unused * |
| 2 | Unused * |
| 3 | Run Boot ROM Downloader |
| 4 | Unused * |
| 5 | Erase Flash ROM (OS and configuration) |
| 6 | Erase Flash ROM (configuration only) |
| 7 | Unused * |
| 8 | Unused * |
| 9 | Allow letmein password for 5 minutes after powerup |
MicroRouter 900i and 1000R
| Switch Setting | Function |
| 0 | Normal Operation |
| 1 | RAM Test * |
| 2 | Ethernet Test * |
| 3 | Unused * |
| 4 | Unused * |
| 5 | Erase Flash ROM (OS and configuration) |
| 6 | Flash ROM Test * |
| 7 | Manufacturing Burn In * |
| 8 | Serial Test * |
| 9 | Allow letmein password for 5 minutes after powerup |
RISC Router 3000E
| Switch Setting | Function |
| 0 | Normal Operation |
| 1 | Force Serial Operation on Serial/LocalTalk A |
| 2 | Unused * |
| 3 | Run Boot ROM Downloader |
| 4 | Unused * |
| 5 | Erase Flash ROM (OS and configuration) |
| 6 | Unused * |
| 7 | Unused * |
| 8 | Unused * |
| 9 | Allow letmein password for 5 minutes after powerup |
Ether Route, Ether Route II, Ether Route TCP/II
| Switch Setting | Function |
| 0 | Normal Operation |
| 1 | Memory Test and Ethernet Loopback * |
| 2 | Ethernet Loopback * |
| 3 | ROM Boot |
| 4 | LocalTalk Loopback Test * |
| 5 | Flash Erase |
| 6 | Flash Test Only |
| 7 | Manufacturing Burn In * |
| 8 | Unused * |
| 9 | Allow letmein password for 5 minutes after powerup |
Ether Write, Ether Write/LPR
| Switch Setting | Function |
| 0 | Normal Operation |
| 1 | Force Phase 1 AppleTalk Operation * |
| 2 | Force Phase 2 AppleTalk Operation * |
| 3 | Unused * |
| 4 | Unused * |
| 5 | Erase Flash ROM (OS and configuration) |
| 6 | Unused * |
| 7 | Unused * |
| 8 | Unused * |
| 9 | Allow only one LocalTalk device |
All Other Compatible Systems Devices
| Switch Setting | Function |
| 0 | Normal Operation |
| 1 | Unused * |
| 2 | Unused * |
| 3 | Run Boot ROM Downloader |
| 4 | Unused * |
| 5 | Erase Flash ROM (OS and configuration) |
| 6 | Erase Flash ROM (configuration only) |
| 7 | Unused * |
| 8 | Unused * |
| 9 | Allow letmein password for 5 minutes after powerup |
| Updated: May 03, 2004 | Document ID: 17698 |