Document ID: 17634
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Contents - Cable Diagrams
Compatible Systems DCE Mini Din-8 to RS232 DB-25 Male Cable
Compatible Systems DTE Mini Din-8 to RS232 DB-25 Female Cable
Compatible Systems Multiconnector Cable Diagram and Pinout Table
Pinout Table
Compatible Systems V.35 Male to Male Cable (straight through)
Compatible Systems V.11 DB-26 Male to DB-15 Male Cable
Related Information
Introduction
This document provides links which provide diagrams and pin assignments for the custom data communications cables that are used with Compatible Systems Corporation internetworking devices.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Contents - Cable Diagrams
Compatible Systems DCE Cable (Grey)
Cable used to connect a Compatible Systems MicroRouter 900i or 1000R to a line device.
Compatible Systems DTE Cable (Black)
Cable used to connect a terminal to the AUX/Console port (not used on all routers).
Compatible Systems Multiconnector Cable
Cable used to connect six line devices to the serial port of a RISC Router 2900i or 3800R.
Compatible Systems V.35 male to V.35 male Cable (straight through)
Cable used to connect a Compatible Systems router equipped with a V.35 port to another line device.
Compatible Systems V.11 DB-26 male to DB-15 male Cable
Cable used to connect a RISC Router 2600i or 3500R to another line device.
Compatible Systems DCE Mini Din-8 to RS232 DB-25 Male Cable
This Data Communications Equipment cable is used to connect a line device, such as a modem, to the serial port of our routers.
Compatible Systems DTE Mini Din-8 to RS232 DB-25 Female Cable
This Data Terminal Equipment cable is used to connect from the serial port of a computer or terminal to the console/AUX port of our routers. A straight through DB25 to DB9 connector with the proper genders can be used to connect the router to a computer with a DB9 serial port.
Compatible Systems Multiconnector Cable Diagram and Pinout Table
This Data Communications Equipment cable is used to connect six RS-232 line devices, such as modems, to the 78-pin serial port of the RISC Router 2900i and RISC Router 3800R.
Pinout Table
|
FROM |
TO |
SIGNAL NAME |
|---|---|---|
|
P1-1 |
W0(6)-4 |
RTS0(6) |
|
P1-2 |
W0(6)-5 |
CTS0(6) |
|
P1-3 |
W0(6)-3 |
RD0(6) |
|
P1-21 |
W0(6)-17 |
RC0(6) |
|
P1-22 |
W0(6)-7 |
GND0(6) |
|
P1-23 |
W0(6)-15 |
TC0(6) |
|
P1-40 |
W0(6)-20 |
DTR0(6) |
|
P1-41 |
W0(6)-24 |
TCE0(6) |
|
P1-42 |
W0(6)-2 |
TD0(6) |
|
P1-60 |
W0(6)-6 |
DSR0(6) |
|
P1-61 |
W0(6)-8 |
DCD0(6) |
|
P1-4 |
W1(7)-4 |
RTS1(7) |
|
P1-5 |
W1(7)-5 |
CTS1(7) |
|
P1-6 |
W1(7)-3 |
RD1(7) |
|
P1-24 |
W1(7)-17 |
RC1(7) |
|
P1-25 |
W1(7)-7 |
GND1(7) |
|
P1-26 |
W1(7)-15 |
TC1(7) |
|
P1-43 |
W1(7)-20 |
DTR1(7) |
|
P1-44 |
W1(7)-24 |
TCE1(7) |
|
P1-45 |
W1(7)-2 |
TD1(7) |
|
P1-63 |
W1(7)-6 |
DSR1(7) |
|
P1-64 |
W1(7)-8 |
DCD1(7) |
|
P1-7 |
W2(8)-4 |
RTS2(8) |
|
P1-8 |
W2(8)-5 |
CTS2(8) |
|
P1-9 |
W2(8)-3 |
RD2(8) |
|
P1-27 |
W2(8)-17 |
RC2(8) |
|
P1-28 |
W2(8)-7 |
GND2(8) |
|
P1-29 |
W2(8)-15 |
TC2(8) |
|
P1-46 |
W2(8)-20 |
DTR2(8) |
|
P1-47 |
W2(8)-24 |
TCE2(8) |
|
P1-48 |
W2(8)-2 |
TD2(8) |
|
P1-66 |
W2(8)-6 |
DSR2(8) |
|
P1-67 |
W2(8)-8 |
DCD2(8) |
|
P1-10 |
W3(9)-4 |
RTS3(9) |
|
P1-12 |
W3(9)-5 |
CTS3(9) |
|
P1-12 |
W3(9)-3 |
RD3(9) |
|
P1-30 |
W3(9)-17 |
RC3(9) |
|
P1-31 |
W3(9)-7 |
GND3(9) |
|
P1-32 |
W3(9)-15 |
TC3(9) |
|
P1-49 |
W3(9)-20 |
DTR3(9) |
|
P1-50 |
W3(9)-24 |
TCE3(9) |
|
P1-51 |
W3(9)-2 |
TD3(9) |
|
P1-69 |
W3(9)-6 |
DSR3(9) |
|
P1-70 |
W3(9)-8 |
DCD3(9) |
|
P1-13 |
W4(10)-4 |
RTS4(10) |
|
P1-14 |
W4(10)-5 |
CTS4(10) |
|
P1-15 |
W4(10)-3 |
RD4(10) |
|
P1-33 |
W4(10)-17 |
RC4(10) |
|
P1-34 |
W4(10)-7 |
GND4(10) |
|
P1-35 |
W4(10)-15 |
TC4(10) |
|
P1-52 |
W4(10)-20 |
DTR4(10) |
|
P1-53 |
W4(10)-24 |
TCE4(10) |
|
P1-54 |
W4(10)-2 |
TD4(10) |
|
P1-72 |
W4(10)-6 |
DSR4(10) |
|
P1-73 |
W4(10)-8 |
DCD4(10) |
|
P1-16 |
W5(11)-4 |
RTS5(11) |
|
P1-17 |
W5(11)-5 |
CTS5(11) |
|
P1-18 |
W5(11)-3 |
RD5(11) |
|
P1-36 |
W5(11)-17 |
RC5(11) |
|
P1-37 |
W5(11)-7 |
GND5(11) |
|
P1-38 |
W5(11)-15 |
TC5(11) |
|
P1-55 |
W5(11)-20 |
DTR5(11) |
|
P1-56 |
W5(11)-24 |
TCE5(11) |
|
P1-57 |
W5(11)-2 |
TD5(11) |
|
P1-75 |
W5(11)-6 |
DSR5(11) |
|
P1-76 |
W5(11)-8 |
DCD5(11) |
Compatible Systems V.35 Male to Male Cable (straight through)
Cable used to connect a Compatible Systems router equipped with a V.35 port to another line device.
Compatible Systems V.11 DB-26 Male to DB-15 Male Cable
Cable used to connect a RISC Router 2600i or 3500R to another line device.
Related Information
| Updated: May 03, 2004 | Document ID: 17634 |