Table of Contents
Cross-Platform Release Notes for Cisco IOS Release 12.2SR
Determining the Software Version
Upgrading to a New Software Release
Determining the Software Images (Feature Sets) That Support a Specific Feature
Determining the Features Supported in a Specific Software Image (Feature Set)
New Hardware Features in Cisco IOS Release 12.2(33)SRE2
New Software Features in CiscoIOS Release12.2(33)SRE2
IPv6 Services: DNS Lookups over an IPv6 Transport
ISG: Triple Key Authentication Support
New Hardware Features in Cisco IOS Release 12.2(33)SRE1
New Software Features in CiscoIOS Release12.2(33)SRE1
DWDM-SFP-xxxx 40x Wavelengths on RSP720
DWDM-SFP-xxxx on SUP32 and 67xx-SFP on Cisco 7600 (8x Additional Wavelengths)
Private Host on Pseudoport on CWAN Cards
WANPHY and OTN Support on ES+XC Combination Line Card
XFP-10G-MM-SR on 10GE Ports for Cisco 7600
New Hardware Features in Cisco IOS Release 12.2(33)SRE
New Software Features in CiscoIOS Release12.2(33)SRE
New Hardware Features in Cisco IOS Release 12.2(33)SRD4
New Software Features in CiscoIOS Release12.2(33)SRD4
New Hardware Features in Cisco IOS Release 12.2(33)SRD3
New Software Features in CiscoIOS Release12.2(33)SRD3
New Hardware Features in Cisco IOS Release 12.2(33)SRD2
New Software Features in CiscoIOS Release12.2(33)SRD2
New Hardware Features in Cisco IOS Release 12.2(33)SRD1
New Software Features in CiscoIOS Release12.2(33)SRD1
New Hardware Features in Cisco IOS Release 12.2(33)SRD
New Software Features in CiscoIOS Release12.2(33)SRD
New Hardware Features in Cisco IOS Release 12.2(33)SRC2
New Software Features in CiscoIOS Release12.2(33)SRC2
New Hardware Features in Cisco IOS Release 12.2(33)SRC1
New Software Features in Cisco IOS Release 12.2(33)SRC1
New Hardware Features in CiscoIOS Release12.2(33)SRC
New Software Features in CiscoIOS Release12.2(33)SRC
New Hardware Features in CiscoIOS Release12.2(33)SRB3
New Software Features in CiscoIOS Release12.2(33)SRB3
New Hardware Features in CiscoIOS Release12.2(33)SRB1
New Software Features in CiscoIOS Release12.2(33)SRB1
New Hardware Features in CiscoIOS Release12.2(33)SRB
New Software Features in CiscoIOS Release12.2(33)SRB
New Hardware Features in CiscoIOS Release12.2(33)SRA1
New Software Features in CiscoIOS Release12.2(33)SRA1
New Hardware Features in CiscoIOS Release12.2(33)SRA
New Software Features in CiscoIOS Release12.2(33)SRA
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRE
Enhanced Optical Services Modules Not Supported
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRC2
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRC
Cisco 7200VXR Limitations on Support for Voice Features
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRB
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRA
Cisco IOS Release 12.2(33)SRE8
Cisco IOS Release 12.2(33)SRE7
Cisco IOS Release 12.2(33)SRE6
Cisco IOS Release 12.2(33)SRE5
Cisco IOS Release 12.2(33)SRE4
Cisco IOS Release 12.2(33)SRE3
Cisco IOS Release 12.2(33)SRE2
Cisco IOS Release 12.2(33)SRE1
Cisco IOS Release 12.2(33)SRD4
Important Notes for Cisco IOS Release 12.2(33)SRE3
Validated Software Upgrade Matrix to Cisco IOS Release 12.2(33)SRE3
Important Notes for Cisco IOS Release 12.2(33)SRD3
Important Notes for Cisco IOS Release 12.2(33)SRD2a
Important Notes for Cisco IOS Release 12.2(33)SRD1
Important Notes for Cisco IOS Release 12.2(33)SRC1
ip nbar protocol-discovery Command
Important Notes for Cisco IOS Release 12.2(33)SRB
Important Notes for Cisco IOS Release 12.2(33)SRA2
Important Notes for Cisco IOS Release 12.2(33)SRA
Cross-Platform Release Notes for Cisco IOS Release 12.2SR
First Published: June 19, 2006
Last Updated: September 05, 2013
Release: Cisco IOS Release 12.2(33)SRE9
Part Number: OL-10394-05 Rev. S0
These release notes support Cisco IOS Release 12.2SR for the Cisco 7600 series routers up to and including Cisco IOS Release 12.2(33)SRE9. With the release of Cisco IOS Release 12.2(33)SRC, Cisco IOS Release 12.2SR also supports the Cisco 7200 series routers (Cisco 7200, Cisco 7200-NPE-G2, and Cisco 7201 routers) and the Cisco 7301 router. These release notes are updated as needed to describe new features, caveats, potential software deferrals, and related documents.
Cisco IOS Software Release 12.2SR is designed for Enterprise WAN and service provider edge networks that require world-class IP and Multiprotocol Label Switching (MPLS) services. The routers in Cisco IOS Release 12.2SR provide scalable, secure, converged network services in the most demanding Enterprise WAN and service provider edge environments.
For more information, see the “Introduction” section.
For a list of the software caveats that apply to Cisco IOS Release 12.2SR, see the following document:
These documents are updated for every maintenance release and are located on Cisco.com.
Use these release notes with the appropriate platform documentation. See the “Related Documentation” section.
We recommend that you view the field notices for this release to see if your software or hardware platforms are affected. If you have an account on Cisco.com, you can find field notices at http://www.cisco.com/warp/customer/tech_tips/index/fn.html . If you do not have a Cisco.com login account, you can find field notices at http://www.cisco.com/en/US/support/tsd_products_field_notice_summary.html .
Introduction
Cisco IOS Release 12.2SR is based on the following releases:
- Cisco IOS Release 12.2
- Cisco IOS Release 12.2S up to and including Release 12.2(18)S
- Cisco IOS Release 12.2SX up to and including Release 12.2(18)SXF
- Cisco IOS Release 12.2SB up to and including Release 12.2(31)SB2 (beginning with Cisco IOS Release 12.2(33)SRC).
In addition, many new features are introduced in Release 12.2SR. Many features and hardware that are supported in this software have been previously released to customers on other software releases.
For information on new features and Cisco IOS commands that are supported by Release 12.2SR, see the “New and Changed Information” section.
Early Deployment Releases
These release notes describe the networking devices for Cisco IOS Release 12.2SR, which is an early deployment (ED) release that is based on Release 12.2, Release 12.2S, Release 12.2SB, and Release 12.2SX. Early deployment releases contain fixes for software caveats and support for new Cisco hardware and software features.
Chronological List of ED Releases for Cisco IOS Release 12.2SR
Table 1 shows the Cisco IOS Release 12.2SR early deployment releases in chronological order.
System Requirements
This section describes the system requirements for Cisco IOS Release 12.2SR and includes the following sections:
- Supported Hardware
- Determining the Software Version
- Upgrading to a New Software Release
- Feature Support
- Memory Recommendations
Supported Hardware
Cisco IOS Release 12.2SR supports Cisco 7600 series routers, including the following models and supervisor engines:
- Cisco 7603-S, Cisco 7604, Cisco 7606, Cisco 7606-S, Cisco 7609, Cisco 7609-S, and Cisco 7613 routers
- Supervisor Engine 32, Supervisor Engine 720, Route Switch Processor 720
- RSP720-3CXL-10GE, RSP720-3C-10GE (The Cisco 7600 Series RSP 720-10GE is introduced on Cisco IOS 12.2(33)SRC on a limited orderability basis.)
Guide to Supported Hardware for Cisco 7600 Series Routers
For extensive information about all supported hardware for Cisco 7600 series routers, see the Guide to Supported Hardware for Cisco 7600 Series Routers with Release 12.2SR .
Note Cisco IOS Release 12.2SR supports Cisco 7600 series routers. Do not run this release on Cisco Catalyst 6500 series switches.
With the release of Cisco IOS Release 12.2(33)SRC, Cisco IOS Release 12.2SR also supports the following Cisco 7200 and Cisco 7300 series routers:
For information about the new hardware features, see the “New and Changed Information” section.
Determining the Software Version
To determine the version of Cisco IOS software that is running on your Cisco router, log in to the router and enter the show version EXEC command:
Upgrading to a New Software Release
For information about selecting a new Cisco IOS software release, see How to Choose a Cisco IOS Software Release at the following location:
http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1834/products_tech_note09186a00800fb9d9.shtml
For information about upgrading the Cisco 7600 series routers, see the document at the following location :
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080094c07.shtml
For Cisco IOS upgrade ordering instructions, see the document at the following location:
http://www.cisco.com/warp/public/cc/pd/iosw/prodlit/957_pp.htm
To choose a new Cisco IOS software release by comparing feature support or memory requirements, use Cisco Feature Navigator. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS and Catalyst OS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or by feature set (software image). Under the release section, you can compare Cisco IOS software releases side by side to display both the features that are unique to each software release and the features that the releases have in common.
Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:
To choose a new Cisco IOS software release based on information about defects that affect that software, use Bug Toolkit at the following URL:
http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl
Feature Support
Cisco IOS software is packaged in feature sets that consist of software images that support specific platforms. The feature sets available for a specific platform depend on which Cisco IOS software images are included in a release. Each feature set contains specific Cisco IOS features.
Caution Cisco IOS images with strong encryption (including, but not limited to 168-bit [3DES] data encryption feature sets) are subject to U.S. government export controls and have limited distribution. Strong encryption images to be installed outside the United States are likely to require an export license. Customer orders may be denied or subject to delay because of U.S. government regulations. When applicable, the purchaser/user must obtain local import and use authorizations for all encryption strengths. Please contact your sales representative or distributor for more information, or send an e-mail to export@cisco.com.
Feature-to-image mapping is available through Cisco Feature Navigator. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or by feature set (software image). You can compare Cisco IOS software releases side-by-side to display both the features unique to each software release and the features that the releases have in common.
Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:
For help with Cisco Feature Navigator, see the help information at the following URL:
http://www.cisco.com/web/applicat/CFNTOOLS/Help_Docs/help/cfn_support.html
Determining the Software Images (Feature Sets) That Support a Specific Feature
To determine which software images (feature sets) in a Cisco IOS release support a specific feature, go to the Cisco Feature Navigator home page and perform the following steps.
Step 1 From the Cisco Feature Navigator home page, click Research Features .
Step 2 Select your software type or leave the field as “All”.
Step 3 To find a feature, you can search by either Feature or Technology (select the appropriate button). If you select Search by Feature, you can further filter your search by using the Filter By text box.
Step 4 Choose a feature from the Available Features text box, and click the Add button to add the feature to the Selected Features text box.
Note To learn more about a feature in the list, click the View Desc button in the Available Features text box.
Repeat this step to add features. A maximum of 20 features can be chosen for a single search.
Step 5 Click Continue when you are finished choosing features.
Step 6 In the Release/Platform Tree area, select either your release (from the Train-Release list) or your platform (from the Platform list).
Step 7 The “Search Result” table will list all the software images (feature sets) that support the features that you chose.
Note You can download your results into an Excel spreadsheet by clicking on the Download Excel button.
Determining the Features Supported in a Specific Software Image (Feature Set)
To determine which features are supported in a specific software image (feature set), go to the Cisco Feature Navigator home page and perform the following steps.
Step 1 From the Cisco Feature Navigator home page, click Research Software .
Step 2 Select your software type from the drop-down list and chose the Release button in the “Search By” area.
Step 3 From the Major Release drop-down list, chose the appropriate major release.
Step 4 From the Release drop-down list, choose the appropriate maintenance release.
Step 5 From the Platform drop-down list, choose the appropriate hardware platform.
Step 6 From the Feature Set drop-down list, choose the appropriate feature set. The Image Details area will provide details on the specific image. The Available Features area will list all the features that are supported by the feature set (software image) that you chose.
Note To learn more about a feature in the list, click the View Desc button in the Available Features text box.
Memory Recommendations
To determine memory recommendations for software images (feature sets) in your Cisco IOS release, go to the Cisco Feature Navigator home page and perform the following steps.
Step 1 From the Cisco Feature Navigator home page, click Research Software .
Step 2 Select your software type from the drop-down list and choose the Release button in the “Search By” area.
Step 3 From the Major Release drop-down list, choose the appropriate major release.
Step 4 From the Release drop-down list, choose the appropriate maintenance release.
Step 5 From the Platform drop-down list, choose the appropriate hardware platform.
Step 6 From the Feature Set drop-down list, choose the appropriate feature set.
Step 7 The Image Details area will provide details on the specific image including the DRAM and flash memory recommendations for each image. The Available Features area will list all the features that are supported by the feature set (software image) that you chose.
New and Changed Information
This section lists the new hardware and software features supported by Cisco IOS Release 12.2SR and contains the following subsections:
- New Hardware Features in Cisco IOS Release 12.2(33)SRE2
- New Software Features in Cisco IOS Release 12.2(33)SRE2
- New Hardware Features in Cisco IOS Release 12.2(33)SRE1
- New Software Features in Cisco IOS Release 12.2(33)SRE1
- New Hardware Features in Cisco IOS Release 12.2(33)SRE
- New Software Features in Cisco IOS Release 12.2(33)SRE
- New Hardware Features in Cisco IOS Release 12.2(33)SRD4
- New Software Features in Cisco IOS Release 12.2(33)SRD4
- New Hardware Features in Cisco IOS Release 12.2(33)SRD3
- New Software Features in Cisco IOS Release 12.2(33)SRD3
- New Hardware Features in Cisco IOS Release 12.2(33)SRD2
- New Software Features in Cisco IOS Release 12.2(33)SRD2
- New Hardware Features in Cisco IOS Release 12.2(33)SRD1
- New Software Features in Cisco IOS Release 12.2(33)SRD1
- New Hardware Features in Cisco IOS Release 12.2(33)SRD
- New Software Features in Cisco IOS Release 12.2(33)SRD
- New Hardware Features in Cisco IOS Release 12.2(33)SRC2
- New Software Features in Cisco IOS Release 12.2(33)SRC2
- New Hardware Features in Cisco IOS Release 12.2(33)SRC1
- New Software Features in Cisco IOS Release 12.2(33)SRC1
- New Hardware Features in Cisco IOS Release 12.2(33)SRC
- New Software Features in Cisco IOS Release 12.2(33)SRC
- New Hardware Features in Cisco IOS Release 12.2(33)SRB3
- New Software Features in Cisco IOS Release 12.2(33)SRB3
- New Hardware Features in Cisco IOS Release 12.2(33)SRB1
- New Software Features in Cisco IOS Release 12.2(33)SRB1
- New Hardware Features in Cisco IOS Release 12.2(33)SRB
- New Software Features in Cisco IOS Release 12.2(33)SRB
- New Hardware Features in Cisco IOS Release 12.2(33)SRA1
- New Software Features in Cisco IOS Release 12.2(33)SRA1
- New Hardware Features in Cisco IOS Release 12.2(33)SRA
- New Software Features in Cisco IOS Release 12.2(33)SRA
Note These release notes are not cumulative and list only features that are new to Cisco IOS Release 12.2SR, which is based on Release 12.2, Release 12.2S, Release 12.2SB, and Release 12.2SX. For information about inherited features, go to Cisco.com or Cisco Feature Navigator. For Cisco.com, either go to Cisco.com and select the appropriate software release under Products and Service and IOS Software, or go to http://www.cisco.com/cisco/web/psa/default.html and select the appropriate software release under Cisco IOS Software and Release Notes. You can use the Cisco Feature Navigator tool at http://www.cisco.com/go/cfn.
Note For extensive information about all supported hardware in Cisco IOS Release 12.2SR, see the Guide to Supported Hardware for Cisco 7600 Series Routers with Release 12.2SR.
New Hardware Features in Cisco IOS Release 12.2(33)SRE2
There are no new hardware features in Cisco IOS Release 12.2(33)SRE2.
New Software Features in Cisco IOS Release 12.2(33)SRE2
This section describes new and changed features in Cisco IOS Release 12.2(33)SRE2. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRE2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
IPv6 Services: DNS Lookups over an IPv6 Transport
For additional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-addrg_bsc_con.html
ISG: Triple Key Authentication Support
For additional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/en_isg_ext_plcy_svrs.html
New Hardware Features in Cisco IOS Release 12.2(33)SRE1
This section describes new and changed features in Cisco IOS Release 12.2(33)SRE1. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRE1. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Addition of ES Transport Line Cards for Cisco 7600
For additional information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_hw_install_guide.html
ES Line Cards for Cisco 7600
This feature introduces the following line cards:
- 76-ES+T-20G
- 76-ES+T-2TG
- 76-ES+T-40G
- 76-ES+T-4TG
- 76-ES+XC-20G3C
- 76-ES+XC-20G3CXL
- 76-ES+XC-40G3C
- 76-ES+XC-40G3CXL
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_chap2.html
New Software Features in Cisco IOS Release 12.2(33)SRE1
This section describes new and changed features in Cisco IOS Release 12.2(33)SRE1. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRE1. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Call Home
The Call Home feature provides e-mail and web-based notification of critical system events. A versatile range of message formats are available for optimal compatibility with pager services, standard e-mail, or XML-based automated parsing applications. Common uses of this feature includes direct paging of a network support engineer, e-mail notification to a Network Operations Center, XML delivery to a support website, and direct case generation with the Cisco Systems Technical Assistance Center (TAC).
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7200/configuration/feature_guides/callhome_7200.html#wp1055783
CWDM-SFP-xxxx on RSP720 GE
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
DWDM-SFP-xxxx 40x Wavelengths on RSP720
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
DWDM-SFP-xxxx on SUP32 and 67xx-SFP on Cisco 7600 (8x Additional Wavelengths)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
IP SERVICES
IP Base (IP SERVICES) supports the standard IP version 6 (IPv6) features on the Cisco 7600 series routers with Cisco IOS Release 12.2(33)SRE1.
Private Host on Pseudoport on CWAN Cards
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/pacl.html
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/baldcfg.html
WANPHY and OTN Support on ES+XC Combination Line Card
The 10GE ports on the ES+ and ES+T line cards are hardware, which are capable of supporting the Optical Transport Network (OTN) and Wide Area Network (WAN)PHY. This feature provides the software functionality to support OTN and WAN PHY on ES+ and ES+T line cards on Cisco 7600 series routers. WANPHY leverages 10 Gig SONET infrastructure and accesses WAN facilities using:
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap10.html
XFP-10G-MM-SR on 10GE Ports for Cisco 7600
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
New Hardware Features in Cisco IOS Release 12.2(33)SRE
This section describes new and changed features in Cisco IOS Release 12.2(33)SRE. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRE. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Enable Support for DWDM-SFPs
This feature enables support for additional DWDM SFPs on ES+ and ES+Combo line cards and on ES20/SIP400/SIP600 (HW):
- DWDM-SFP-3346
- DWDM-SFP-3739
- DWDM-SFP-4134
- DWDM-SFP-4532
- DWDM-SFP-4931
- DWDM-SFP-5332
- DWDM-SFP-5736,
- DWDM-SFP-6141
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES20_Line_Card_Installation_Guide/baldintr_ps368_TSD_Products_Module_Installation_Guide_Chapter.html
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/dynarp.html
ES Line Cards for Cisco 7600
This feature introduces the following line cards:
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_chap2.html
FWSM with RSP720-10GE
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/security/fwsm/fwsm11/configuration/guide/fwsm112.html
Persistent Storage Device (PSD)
The Cisco Persistent Storage Device (PSD) provides persistent storage capabilities to Cisco clients, and allows the clients to store data on the PSD’s internal hard drive. Release 1.x provides content data records (CDR) backup capabilities for Cisco's Content Services Gateway (CSG). Release 2.0 adds CDR backup capabilities for the Cisco Gateway GPRS Serving Node (GGSN).
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/mw_psd/configuration/guide/mw_psd12233srd.html
PWR-4500-DC Power Supply
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Chassis_Installation/7600_Series_Router_Installation_Guide/cis_76xx.html
SFP-GE-T/S/L/Z Support on X6724/X6748
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1266117
STM1E-SFP Support
This feature supports ATM only. For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
USB Storage Filesystem Support
The USB Storage Filesystem Support feature extends the DOSFS component to support USB flash devices on Cisco 7200-NPE-G2 series routers.
X2-DWDM and X2-10GB-LRM/ZR Support on Cisco 7600 Cards (RSP720-10GE and WS-X6708-10GE)
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_hw_install_guide.html
New Software Features in Cisco IOS Release 12.2(33)SRE
This section describes new and changed features in Cisco IOS Release 12.2(33)SRE. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRE. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
7600 ISSU for IP Multicast
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/mcastv4.html
802.1ah
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
AAA Per VC QoS Policy Support
The AAA Per VC QoS Policy Support feature provides the ability to modify an existing quality of service (QoS) profile applied to a session while that session remains active using new Cisco attribute-value (AV) pairs that specify service policy output and service policy input.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_aaa_vc_qos_ps.html
AAA Support for Greater than 8 Login and EXEC Authentication List
The maximum size for the following AAA method lists has been enhanced from 8 to 250.
Before this the maximum size was 8, where one can configure 7 named lists + 1 default list.
After this the user can configure 250 (249 named lists + 1 default list).
AAA-SERVER-MIB Set Operation
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_aaa_serv_mib_op.html
Access Circuit Redundancy
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_and_configuration_guides_list.html
ATM In ARP Support for Different Subnet
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/atm/command/reference/atm_m1.html#wp1014484
ATM VP Average Traffic Rate
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/atm/configuration/guide/atm_vp_avg_tfc_rate.html
BFD IPv6 Encapsulation Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-bfd.html
BGP Best External
Beginning with Cisco IOS Release 12.2(33)SRE, this feature is supported by Cisco 7200 and Cisco 7600 routers. For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_best_external.html
BGP Event-Based VPN Import
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_event_vpn_import.html
BGP PIC Edge for IP/MPLS
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_bgp_mp_pic.html
BGP RT Changes Without PE-CE Neighbor Impact
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_event_vpn_import.html
BGP Support for 4-byte ASN
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_basic_net.html
BGP VPLS Auto Discovery Support on Route Reflector
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_int_features.html
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpls_auto_bgp.html
Bidirectional Forwarding Detection (BFD) MIB Version 2
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute_bfd/configuration/guide/irb_bfd_mib.html
Bridge Domain MIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/technical_references/7600_mib_guides/MIB_Guide_ver_6/7600mib3.html
Cisco 7600 ARP Scale
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_mon_main_arp.html
Commands for SNMP Diagnostics
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cfg_snmp_sup.html
Configurable Domain Name Prefix and Suffix Stripping
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/vpdn/configuration/guide/config_aaa_for_vpdn.html#wp1210170
Configuring _ITU-T Y.1731 Fault Management Functions
The ITU-Y.1731 Fault Management Functions feature provides new functions for fault and performance management to serve the needs of service providers in large networks. These new functions extend Ethernet Alarm Indication Signal (ETH-AIS) and Ethernet Remote Defect Indication (ETH-RDI) to include fault detection, fault verification, and fault isolation for large Ethernet Metropolitan-Area Networks (MANs) and Wide-Area Networks (WANs).
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_cfm-ieee_y1731.html
Custom Ethertype for EVC Port Channel
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
DHCP—DHCPv6 Relay SSO/ISSU
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html
DHCP—Server User Authentication
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html
DHCP Relay Server ID Override and Link Selection Option 82 Suboptions
Server Id Override and Link Selection Option 82 Sub-options are supported on the DHCP Relay. Server Id Override sub-option tells the DHCP Server which value to put in the Server-id option. Link Selection Sub-option tells the DHCP Server from which subnet to assign an IP address when the Giaddr field can not serve _this purpose. Combined together those two sub-options enable the deployment of architecture where it is desired to have the DHCP traffic flowing through the Relay in all cases.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcpservidlink_mcp.html
DHCP Snooping with Option 82 on EVC Port Channel
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
DHCPv6 Relay—Source Configuration
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html
DHCPv6 Repackaging
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html
Dynamic Layer-3 VPNs (RFC 2547) with Multipoint GRE (mGRE) Tunnel Support for SIP400 & ES40 on Cisco 7600 Platform
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_greL3vpn.html
Embedded Event Manager (EEM) 2.4
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_eem_overview.html
Embedded Event Manager (EEM) 3.0
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_eem_overview.html
Event MIB and Expression MIB Enhancements
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cfg_snmp_sup.html
Reverse L2GP
Beginning with Cisco IOS Release 12.2(33)SRE, this feature is supported by ES+ and ES20 line cards. For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
Flash MIB Enhancements
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/ol_14271.html
Flexible NetFlow—Ingress VRF Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/cust_fnflow_rec_mon.html
Flexible Netflow— IPv4 Multicast Statistics Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/cgf-mcast.html
Flexible NetFlow—IPv6 Unicast Flows
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/cust_fnflow_rec_mon.html
Flexible Netflow—Layer 2 Fields
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/cust_fnflow_rec_mon.html
Flexible NetFlow— NetFlow v9 Export Format
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/cfg_de_fnflow_exprts.html
Flexible Netflow—Netflow v5 Export Protocol
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/cfg_de_fnflow_exprts.html
Flexible Netflow—Top N Talkers Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/fnetflow/configuration/guide/cgf-topn.html
Flexible Service Mapping Based on CoS, Ethertype
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.html
Manual Load Balancing for EVC over Port-Channel/LACP
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/baldcfg.html
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
HC-ALARM-MIB
Enables support for HC-ALARM-MIB as specified in RFC 3434.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cfg_rmon_sup.html
H-VPLS with Port-Channel Core Interface
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/baldcfg.html
IEEE 802.1ag-2007 Compliant CFM - Bridge Domain Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_cfm-ieee.html
IGMP MIB Support Enhancements for SNMP
The Internet Group Management Protocol (IGMP) is used by IP hosts to report their multicast group memberships to neighboring multicast routers. The IGMP MIB describes objects that enable users to remotely monitor and configure IGMP using Simple Network Management Protocol (SNMP). It also allows users to remotely subscribe and unsubscribe from multicast groups. The IGMP MIB Support Enhancements for SNMP feature adds full support of RFC 2933 (Internet Group Management Protocol MIB) in Cisco IOS software. There are no new or modified Cisco IOS commands associated with this feature.
For detailed information about the IGMP MIB, see the IGMP-STD-MIB.my file available from the Cisco MIB Locator at
IGMP Static Group Range Support
This feature adds new commands to configure a range of IGMP static groups.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_igmp_static_rng.html
IGMPv3 Host Stack
IGMPv3 host stack support enables a router or switch to behave as a multicast network end point or host.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_customize_igmp.html
IP and PPPoE Session Coexistence with Multicast
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
IP Session Support on the Cisco 7600 ES+ Series Line Cards
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_sub_aware_enet.html
IP SLAs Metro-Ethernet 3.0 (CFM d8.1)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_metro_ethernet.html
IPv6 - Hop by Hop Rate Limiter on SIP200 and Enhanced FlexWAN
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.html#wp1492073
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/flexqos.html
IPv6 BSR - Configure RP Mapping
This featurette allows IPv6 BSR routers to directly announce scope-to-RP mappings instead of learning them from candidate-RP messages.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-multicast.html
IPv6 BSR Bidirectional Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-multicast.html
IPv6 Multicast: Bandwidth-Based Call Admission Control (CAC)
This feature implements a method to monitor bandwidth per interface and multicast group, avoiding oversubscription due to multicast services.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-multicast.html
IPv6 Neighbor Discovery Non-Stop Forwarding (NSF)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-addrg_bsc_con.html
IPv6 Source Specific Multicast (SSM) Mapping
SSM Mapping for IPv6 will support both static and dynamic DNS mapping for MLD v1 receivers. This feature allows deployment of IPv6 SSM with hosts that are (at least currently) incapable to provide MLD version 2 support in their TCP/IP host stack and their IP multicast receiving application.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-multicast.html
IPv6: Multicast Address Group Range Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-multicast.html
IPv6: NSF & Graceful Restart for MP-BGP IPv6 Address Family
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mptcl_bgp.html
IPv6: RIPng Non-Stop Forwarding
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-rip.html
ISG: Instrumentation: DHCP Lease Query Support
This feature supports a DHCP lease query mechanism to get information about a DHCP lease based on the client’s IP address as described in RFC 4388.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/partner/docs/ios-xml/ios/isg/configuration/12-2sr/isg-acess-ip-sess.html
ISG: Session: Multicast: Coexistence
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ios_xe/isg/configuration/guide/isg_acess_sub_sessns_xe.html
ISG: Session: Static Session Creation
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html
ISG:AAA Wireless Enhancements
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_radius_proxy.html
ISG: Authentication: Radius Proxy WiMax Enhancements
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_radius_proxy.html
ISG: Policy Control: Differentiated Initial Policy Control
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_cntrl_policies.html
IS-IS - MPLS LDP Autoconfiguration
The SYNC feature helps synchronize ISIS forwarding with MPLS forwarding to reduce MPLS traffic being IP forwarded during a link flap. There must be an alternate path for this feature to operate correctly. This feature helps prevent black-holing when using MPLS VPNs with fast convergence.
The AUTOCONFIG feature allows LDP to be turned ON automatically on ISIS-enabled interfaces.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_autoconfig.html
IS-IS - MPLS LDP Synchronization
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_igp_synch.html
ISSU - IPv4 Multicast
Extends NSF/SSO and ISSU support to v4 and v6 Multicast Protocols.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_high_availability.html
L2VPN Interworking: VLAN Enable/Disable Option for AToM
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_intrntwkg.html
L2VPN Pseudowire Control Word Configuration (enable/disable/autosense)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_intrntwkg.html
L2VPN Pseudowire Redundancy for L2TPv3
Provides pseudowire redundancy for Layer 2 Tunnel Protocol Version 3 (L2TPv3) xconnect configurations.
http://www.cisco.com/en/US/docs/ios/wan/configuration/guide/wan_l2vpn_pw_red.html
L2VPN Pseudowire Switching
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_pseudo_swit.html
L2VPN PW Preferential Forwarding (Active/Standby Status)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/l2vpn_pw_preferential_forwarding.html
L2VPN Support for ATM Cell Packing on Static PW
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_atom_pseud_prov.html
L3 Classification and Marking on EVC on ES20
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/bald_qos.html
L3/L4 Security ACL on Service Instance
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/bald_qos.html
Login Password Retry Lockout
The Login Password Retry Lockout feature allows system administrators to lock out a local authentication, authorization, and accounting (AAA) user account after a configured number of unsuccessful attempts by the user to log in.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_login_pw_retry_ps6350_TSD_Products_Configuration_Guide_Chapter.html
Label Switched Multicast Point-to-Multipoint Traffic Engineering
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_p2mp.html
MLD Group Limits
This feature enables global and per-interface MLD join limits.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-multicast.html
MPLS Support for Multi-Segment PWs—MPLS OAM/VCCV
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/multisegmentpseudowires.html
MPLS TE—Autoroute Destinations
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_interarea_tun.html
MPLS TE—Autotunnel/Automesh SSO Coexistence
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_autotun_mesh.html
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_autotunnel.html
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_rsvp_grace.html
MPLS TE—Enhanced Path Protection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_path_prot.html
MPLS Point-to-Multipoint Traffic Engineering
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_p2mp.html
MPLS VPN—L3VPN Over GRE on Cisco 7600 ES+ Series Line Cards
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_gre.html
MPLS VPN over mGRE
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_mplsvpnomgre.html
MSDP MD5 Password Authentication
This featurette adds support for MD5 signature protection for MSDP TCP connections in accordance with RFC2385.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_msdp_im_pim_sm.html
Multicast Address Group Range Support
The Multicast Address Group Range Support feature enhances multicast access control by introducing the capability to define a global range of multicast groups and channels to be permitted or denied using the IP multicast group-range command.
Multicast MIB VRF Support
The Multicast MIB VRF Support feature is an enhancement to help manage Cisco devices in a multicast VPN (MVPN) environment using SNMP. This feature enhances the Cisco suite of supported multicast MIBs by making the following multicast MIBs VRF aware:
Multicast VRF (MVRF) awareness enables the MIB objects associated with these multicast MIBs to be queried and set for the individual MVRFs configured. In addition, MVRF awareness provides the capability to detect conditions for a trap inside of an MVRF and lookup the correct information for that MVRF; the traps would then be sent to the SNMP manager that is configured for that MVRF.
For detailed information about these MIBs, and to locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at
Multi-Chassis Support for LACP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
NSF/SSO—IPv4 Multicast
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_high_availability.html
NSF/SSO—IPv6 Multicast
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-multicast.html
NSF/SSO and ISSU—MPLS VPN 6VPE and 6PE
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_6vpe_6pe_issu_sso.html
NSSA-Only
The NSSA-Only feature can be used to restrict the scope of routes imported into NSSA areas. The following commands were modified by this feature: redistribute (IP), summary-address , set level , area nssa and show ip opsf .
For more information about configuring this feature, see these commands in the Cisco IOS IP Routing: Protocol Independent Command Reference at http://www.cisco.com/en/US/docs/ios/iproute_pi/command/reference/iri_book.html .
OSPF Mechanism to Exclude Connected IP Prefixes from LSA Advertisements
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute_ospf/configuration/guide/iro_ex_lsa.html
OSPFv3 BFD
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-bfd.html
OSPFv3 Graceful Restart
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-ospf.html
Parser Concurrency and Locking Improvements
With new proposal of configuration locking mechanism, an exclusive access is granted to the requested process and prevents others from concurrently accessing the IOS configurations.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/cf_config-lock.html
PfR EIGRP mGRE DMVPN Hub-and-Spoke Support
Beginning with Cisco IOS Release 12.2(33)SRE, this feature is supported by Cisco 7200 and Cisco 7300 routers. Cisco 7600 routers are not supported. For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/oer/configuration/guide/pfr-eigrp.html
PIM Stub
Provide basic PIM connectivity support for IPbase images.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_stub_routing.html
PIM Triggered Joins
This feature enables better multicast route convergence after a high-availability switchover.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_pim_triggered_joins.html
Privilege Command Enhancements
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/csprienh.html
QoS—Per-VC QoS Classification for ATM VP Pseudowires
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/qos_atm_vp_support.html
QoS Support on Access Circuit Redundancy
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_and_configuration_guides_list.html
REP Integration with EVC and VPLS
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/ios/lanswitch/configuration/guide/lsw_cfg_rep.html
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/baldcfg.html
RMON MIB Enhancement to Support 64 bit Counters
This feature provides RMON MIB support for the ability to poll 64 bit counters.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cfg_rmon_sup.html
Server Load Balancing: BWG Sticky Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/12_2sr/iap_12_2sr_book.html
Server Load Balancing: GTPv2 Load Balancing
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/12_2sr/iap_12_2sr_book.html
Server Load Balancing: Sub-Interface support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/partner/docs/ios/ipapp/configuration/guide/ipapp_slb.html
Service Advertisement Framework (SAF)
Beginning with Cisco IOS Release 12.2(33)SRE, this feature is supported by Cisco 7200 and Cisco 7300 routers. It is not supported by Cisco 7600 routers. For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/saf/configuration/guide/saf_cg.html
http://www.cisco.com/en/US/docs/ios/saf/command/reference/saf_book.html
Service Groups
The Service Group feature allows network administrators to create service groups, add members (such as service instances) to those service groups, and apply service policies (also known an policy maps) to those newly created groups. The service policies (policy maps) contain the aggregate features (such as traffic policing and queueing) to be applied to the groups in compliance with the Service-Level Agreement (SLA) negotiated between the service provider and the subscribers.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/service_groups_ps6922_TSD_Products_Configuration_Guide_Chapter.html
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/bald_qos.html
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.html#wp1492120
Show Command for Interface Trap Status
Beginning with Cisco IOS Release 12.2(33)SRE, the Show Command for Interface Trap Status feature adds the show snmp mib ifmib traps command to display the status of linkUp and linkDown traps.
For more information about viewing linkUp and linkDown trap status, see the show snmp mib ifmib traps command in the Cisco IOS Network Management Command Reference at the following URL:
http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_book.html
For more information about enabling SNMP notification types, see the
Cisco IOS Network Management Configuration Guide at the following URL:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/15_0/nm_15_0_book.html
SNMP Trap Simulation
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cfg_snmp_sup.html
SSO BFD
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute_bfd/configuration/guide/irb_bfd.html
Static MAC Binding to EVCs and Pseudowires
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/baldcfg.html
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html
http://www.cisco.com/en/US/products/ps5845/products_installation_and_configuration_guides_list.html
Suppressing EXEC Accounting Record
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/EXECstub.html
Synchronous Ethernet Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_sw_config.html
System Accounting Record Generation for Server Addition/Deletion made VRF Aware
New for this 12.2(33)SRE release, system accounting records are generated whenever a RADIUS server is added or deleted in a VRF when using the server-private CLI command. For details about this new feature, see the accounting (server-group) command page.
http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_a2.html
Triple Nesting QoS Support on SIP400
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
VP & VC Mode Cell Packing Support on Cisco 7600/SIP400
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
VPDN Extended Fail-Over
The Virtual Private Dial-up Network (VPDN) failover has been extended to occur in instances where the receiving node sends an error message to the transmitting node. Before this feature, the failover mechanism would only occur when the transmitting node did not receive a response from the receiving node.
Beginning with Cisco IOS Release 12.2(33)SRE, this feature is supported by Cisco 7200 and Cisco 7300 routers. It is not supported by Cisco 7600 routers. For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/vpdn/configuration/guide/vpdn_tunnel_mgmt.html
WCCP: VRF Support
Beginning with Cisco IOS Release 12.2(33)SRE, this feature is supported by Cisco 7200 and Cisco 7300 routers. It is not supported by Cisco 7600 routers. For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_wccp.html
XML-PI
The eXtensible Markup Language Programmatic Interface (XML-PI) Release 1.0 leverages the Network Configuration Protocol (NETCONF) and offers new data models that collect show command output down to the keyword level and running configurations without the complexity and expense of screen-scraping technologies or external XML-to-CLI gateways. XML-PI allows you to quickly develop XML-based network management applications that remotely adapt and control the behavior of any number of network devices simultaneously. XML-PI uses an industry standard protocol that allows Cisco network devices to be managed in a more automatic and programmatic way and is command-line interface (CLI) accessible.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_xmlpi_v1.html
New Hardware Features in Cisco IOS Release 12.2(33)SRD4
This section describes new and changed features in Cisco IOS Release 12.2(33)SRD4. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRD4. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Addition of ES Transport Line Cards for Cisco 7600
For additional information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_hw_install_guide.html
ES Line Cards for Cisco 7600
This feature introduces the following line cards:
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_chap2.html
New Software Features in Cisco IOS Release 12.2(33)SRD4
There are no new software features in Cisco IOS Release 12.2(33)SRD4.
New Hardware Features in Cisco IOS Release 12.2(33)SRD3
This section describes new and changed features in Cisco IOS Release 12.2(33)SRD3. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRD3. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Flexible Service Mapping based on CoS, Ethertype
For additional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.html
New Software Features in Cisco IOS Release 12.2(33)SRD3
This section describes new and changed features in Cisco IOS Release 12.2(33)SRD3. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRD3. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Cisco 7600 ARP Scale
For additional information about this feature, see the following document:
https://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_mon_main_arp.html
IPv6—Hop by Hop Rate Limiter
For additional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
Supporting 2G Grooming with c7600 CEOP SPA AIS Processing
For additional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
New Hardware Features in Cisco IOS Release 12.2(33)SRD2
This section describes new and changed features in Cisco IOS Release 12.2(33)SRD2. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRD2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
512K ARP Entry Validation for ES40 with 2G Memory
For additional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/dynarp.html
Enable STM1E-SFP Support on OC3 SPA for Cisco 7600
For additional information about this feature, see the following documents:
– http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
– http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
Extended-Temp SFP (SFP-GE-T/S/L/Z) Support on WS-X6724/6748-SFP LAN Cards
Note • DOM is not supported on these line cards.
This support did not require any changes to Cisco IOS, and support has been confirmed back to Cisco IOS Release 12.2(33)SRB.
For additional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
MLPPP APS
For additional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
New Software Features in Cisco IOS Release 12.2(33)SRD2
This section describes new and changed features in Cisco IOS Release 12.2(33)SRD2. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRD2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Multi-Segment Pseudo Wire
For additional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_pseudo_swit.html
New Hardware Features in Cisco IOS Release 12.2(33)SRD1
This section describes new and changed features in Cisco IOS Release 12.2(33)SRD1. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRD1. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
1xOC-12/STM-4SONET/SDH SPA
1xOC-12/STM-4SONET/SDH SPA provides channelized SPA support at OC12 level. Channelization up to DS0 level is supported. Along with basic channelization, it supports MLP and LFI features at SPA level. For additional information, see the following documentation:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
76-ES+XT-2TG and 76-ES+XT-4TG
Cisco IOS Release 12.2(33)SRD1 introduces support for the following line cards:
For additional information, see the following documentation:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_hw_install_guide.html
New Software Features in Cisco IOS Release 12.2(33)SRD1
This section describes new and changed features in Cisco IOS Release 12.2(33)SRD1. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRD1. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
DHCP Option 82 Configurable Circuit ID and Remote ID
DHCP Option 82 provides customers a great deal of flexibility when it comes to identifying individual users for various reasons, for example location of attachment, or controlling how many IP addresses a device or user is allowed from the DHCP Server. This enhancement provides customers additional flexibility to determine what information is provided within the Option 82 Remote ID sub-option and Option 82 Circuit ID sub- option.
Remote ID: The customer now has the option to use a switches configured Hostname or specify an ascii text string both are subject to a max length of 63 bytes.
The default is to provide the MAC address of the switch.
Circuit ID: The customer now has the option to configure an ascii text string up to 63 bytes, and override the default Circuit ID which is vlan- module-port in binary format.
For additional detail about the feature, see the following documentation:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_op82_id.html
EVC MIB
The EVC MIB is a Cisco proprietary Simple Network Management Protocol (SNMP) MIB for managing an Ethernet infrastructure. SNMP versions 1 and 2c are supported. The EVC MIB consists of 18 tables and three notifications. The command-line interface (CLI) commands snmp-server enable traps ethernet evc and snmp-server host traps evc are implemented for enabling or disabling notifications. Notifications are disabled by default.
Support for service instances such as Layer 2 VLAN interfaces was added in Cisco IOS Release 12.2(33)SRD1. Service instances are represented as subinterfaces in the IF-MIB and associated with an ifIndex. Four commands support this feature: debug if-mgr trace efp-ext , debug if-mgr errors efp-ext , snmp ifindex , and snmp trap link-status . The snmp commands are supported under service instance configuration mode (config-if-srv). Changes to configurations and existing commands are not required.
To use the EVC MIB, the Ethernet Infrastructure module must be present in the Cisco IOS software image, and Metro Ethernet Infrastructure High Availability must be in place. SET operations are not supported on any object in Cisco IOS Releases 12.2(33)SRD and 12.2(33)SRD1.
For detailed information about EVC MIB-related commands, see the Cisco IOS Carrier Ethernet Command Reference at http://www.cisco.com/en/US/docs/ios/cether/command/reference/ce_book.html
For detailed information about SNMP commands, see both the Cisco IOS Network Management Command Reference at http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_book.html and the Cisco IOS Interface and Hardware Component Command Reference at http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_book.html .
For detailed information about the EVC MIB, and to locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at http://tools.cisco.com/ITDIT/MIBS/servlet/index
IPv6—Hop by Hop Rate Limiter
This feature adds support for IPv6 Hop-by-Hop rate limiter on ES+ and SIP400 platforms. For additional information, see the following documentation:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_sw_config.html
QoS on Port-Channel Member-Link
This feature provides support for configuring egress QoS on port-channel member link. For additional information, see the following documentation:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_sw_config.html
Syslog Support for Ethernet Connectivity Fault Manager
This feature provides syslog message support for Connectivity Fault Management (CFM) features. It enables network administrators to develop scripts for configuring and managing CFM functionality.
For additional details about this feature, see the following documentation:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_cfm-syslog.html
New Hardware Features in Cisco IOS Release 12.2(33)SRD
This section describes new and changed features in Cisco IOS Release 12.2(33)SRD. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRD. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
DWDM SFP Support
For detailed information about this feature, see the following document:
- http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
- http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES20_Line_Card_Installation_Guide/es20-install-guide.html
- http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_hw_install_guide.html
Network Analysis Module (NAM)
The Network Analysis Module (NAM), an integrated and powerful traffic monitoring solution for the high-performance routers, enables network managers to gain application level visibility into network traffic with the ultimate goal of improving performance, reducing failures, and maximizing returns on network investment. The NAMs come with an embedded, web based, Traffic Analyzer, which provides full scale remote monitoring and troubleshooting capabilities accessible through a web browser.
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
New Line Cards
Cisco IOS Release 12.2(33)SRD introduces support for the following line cards:
Note ES40 line cards are not currently available. They will begin shipping during the first quarter of 2009.
For detailed information about these line cards, see the following documents:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_hw_install_guide.html
Persistent Storage Device
The Cisco Persistent Storage Device (PSD) provides persistent storage capabilities to Cisco clients, and allows the clients to store data on the PSD internal hard drive. Release 1.x provides content data records (CDR) backup capabilities for Cisco's Content Services Gateway (CSG). Release 2.0 adds CDR backup capabilities for the Cisco Gateway GPRS Serving Node (GGSN).
http://www.cisco.com/en/US/docs/ios/12_2sr/mw_psd/configuration/guide/mw_psd12233srd.html
Service and Application Module for IP
The Cisco SAMI, is a high performance, Cisco IOS software application module that occupies one slot in the Cisco 7600 series router platform.
With an IXP2800 network processor flow-distributor running at 1.4 GHz, and six PowerPCs (PPCs) running at 1.25 GHz, each of which runs an instance of the same Cisco IOS image, the SAMI offers a parallel architecture for Cisco software applications such as the Cisco Content Services Gateway - 2nd Generation (CSG2), the Cisco Gateway GPRS Support Node (GGSN), and the Cisco Mobile Wireless Home Agent (HA).
The benefits of the SAMI architecture over the Cisco Multiprocessor WAN Application Module (MWAM) include:
- Increased processing power and session density
- Reduced inter-CPU data sharing
- Separation of the control and the data plane
- Improved management capabilities
- Easier to configure and troubleshoot
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/wireless/service_application_module/sami/user/guide/samiv1.html
SFP-GE-T on ES40 Line Card
Support for SFP-GE-T was added to the ES40 line card.
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_hw_install_guide.html
SPA-8X1FE-TX-V2 & SPA-4X1FE-TX-V2 Support on SIP-400
Provides support for FE SPA (SPA-8X1FE-TX-V2 & SPA-4X1FE-TX-V2) SIP-400 line card.
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html#wp102076
Support for BX Optics (GLC-BX-U=, GLC-BX-D=) with GE SPA (SIP line cards), ES20 & ES40 Line Cards
Adds support for GLC-BX-U=, GLC-BX-D= to the following line cards:
See the following publications:
- http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
- http://cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES20_Line_Card_Installation_Guide/es20-install-guide.html
- http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_hw_install_guide.html
XFP-10GZR-OC192LR= XFP Support
For detailed information about this feature, see the following document:
- http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
- http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES20_Line_Card_Installation_Guide/es20-install-guide.html
- http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES40_Line_Card_Installation_Guide/es40_hw_install_guide.html
New Software Features in Cisco IOS Release 12.2(33)SRD
This section describes new and changed features in Cisco IOS Release 12.2(33)SRD. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRD. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
32K EVC Scale
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_sw_config.html
802.3ah SNMP MIB
The 802.3ah SNMP MIB is a Cisco proprietary Operations, Administration, and Maintenance (OAM) MIB. It is an adaptation of the IETF draft OAM MIB and is compliant with Simple Network Management Protocol version 2 (SNMPv2). In conjunction with OAM protocols, the 802.3ah SNMP MIB provides the capability to monitor network health, identify link failures and fault conditions, and test and troubleshoot OAM-enabled links. The 802.3ah SNMP MIB consists of six tables and two notifications. SET operations and row creation are not supported in Cisco IOS Release 12.2(33)SRD.
The command-line interface (CLI) command snmp-server enable traps ether-oam is implemented to enable the MIB traps, and the ethernet oam mib log size entries command is implemented to set the maximum size of the event log table.
For detailed information about these commands, see the Cisco IOS Carrier Ethernet Command Reference at http://www.cisco.com/en/US/docs/ios/cether/command/reference/ce_book.html
For detailed information about the 802.3ah SNMP MIB, and to locate and download MIBs for selected platforms, Cisco IOS releases, and feature
sets, use Cisco MIB Locator found at http://tools.cisco.com/ITDIT/MIBS/servlet/index
Asymmetric Carrier Delay
Asymmetric carrier delay provides the ability to control the delay separately for interface up and interface down state notifications.
http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_and_configuration_guides_list.html
Bandwidth Remaining Ratio Support for ES20
This feature enables support for Bandwidth remaining ratio and thus enables support of utilizing unused bandwidth can be shared across logical interfaces.
http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_and_configuration_guides_list.html
Bridging using RFC1483 Routed Encapsulation (BRE)
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html#wp102076
Broadcast Storm Control on Switchports and Ports having EVCs
This feature implements mechanism to detect and control broadcast/multicast congestion/storm scenario via rate control mechanism in ES line cards. See the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/storm.html
CFM (802.1ag) IEEE MIB
The Cisco proprietary CFM (802.1ag) IEEE MIB is a mechanism for managing connectivity and detecting faults in a network. This MIB interacts with the IF MIB and interfaces with Simple Network
Management Protocol (SNMP) to exchange information. The CFM (802.1ag) IEEE MIB consists of 14 tables and one trap.
To use the CFM (802.1ag) IEEE MIB, the CFM 8.1ag module must be present in the Cisco IOS software image. SET operations and row creation are not supported in Cisco IOS Release 12.2(33)SRD.
The command-line interface (CLI) command snmp-server enable traps ethernet cfm alarm is implemented for enabling or disabling the connectivity fault management (CFM) alarm trap, which is disabled by default. For detailed information about the snmp-server enable traps ethernet cfm alarm command, see the Cisco IOS Carrier Ethernet Command Reference at
http://www.cisco.com/en/US/docs/ios/cether/command/reference/ce_book.html
For detailed information about the CFM (802.1ag) IEEE MIB, and to locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at
CFM Outward Facing MEP on Switchports
The Outward Facing MEP on Switchports feature is an enhancement to The Outward Facing MEP feature that supports the distribution and access environments by supporting outward facing MEPs on switch ports. See the following publication:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_cfm.html
CISCO-NETFLOW-MIB
The NetFlow MIB feature provides MIB objects to allow users to configure NetFlow and to monitor flow cache information, the current NetFlow configuration, and statistics.
http://www.cisco.com/en/US/docs/ios/netflow/configuration/guide/cfg_snmp_mib_mon_nf.html
Custom Ethertype for EVC interfaces
Provides the capability to configure a VLAN ethertype other than 0x8100 on EVC interfaces.
http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_and_configuration_guides_list.html
DBUS COS API on SIP-400
The SIP-400 currently treats packets with CoS values of 6 or 7 as high priority traffic. This was all that could be done in the past to help identify high priority traffic and to ensure that when higher rates of traffic than the SIP-400 can process are received, the lower priority traffic is what is dropped. This feature provides the configuration to allow a user to selectively choose any CoS value (or range of values) for the SIP-400 to classify as high priority packets.
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html#wp102076
DHCP Relay Option 82 Encapsulation
The DHCP Relay Option 82 Encapsulation feature allows a second relay agent to encapsulate the relay agent information option (option 82) from a prior relay agent, add its own option 82, and forward the packet to the DHCP server. This feature allows the DHCP server to use option 82 information from both relay agents.
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_rly_agt.html
DHCP Snooping with Option-82 on EVC
This feature allows for DHCP snooping option 82 to be aware of EVC VLAN.
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_sw_config.html
Dual Rate Three Color Ingress Policer on Service Instances on ES20 cards
This feature allows user to configure dual rates policing with three actions (conform, exceed and violate) that can be specified on the ingress of service instances.
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
E-OAM: CFM & PVST Co-Existence
See the following publication:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_sw_config.html
Ethernet-OAM 3.0: CFM over BD, Untagged
The Ethernet-OAM3.0: CFM Over BD, Untagged feature provides support for Ethernet CFM on Cisco IOS devices that support the bridge domain functionality. See the following publication:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_cfm.html
EVC MIB
The EVC MIB is a Cisco proprietary Simple Network Management Protocol (SNMP) MIB for managing an Ethernet infrastructure. SNMP versions 1 and 2c are supported. The EVC MIB consists of 18 tables
To use the EVC MIB, the Ethernet Infrastructure module must be present in the Cisco IOS software image, and Metro Ethernet Infrastructure High Availability must be in place. SET operations are not supported on any object in Cisco IOS Release 12.2(33)SRD.
The command-line interface (CLI) commands snmp-server enable traps ethernet evc and snmp-server host traps evc are implemented for enabling or disabling notifications. Notifications are disabled by default.
For detailed information about these commands, see the Cisco IOS Carrier Ethernet Command Reference at http://www.cisco.com/en/US/docs/ios/cether/command/reference/ce_book.html.
For detailed information about the EVC MIB, and to locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at http://tools.cisco.com/ITDIT/MIBS/servlet/index.
EVC on Port Channel
The EVC on Port Channel feature extends Ethernet port channels to EVC interfaces. QoS is configurable on EVC port channel, similar to EVCs on Ethernet interfaces.
For more detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_sw_config.html
IEEE 802.1s on Bridge Domains
For more detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_mst_evc_bd.html
IMA on SIP-400 for 24xT1/E1 CEOP and 1xOC3 CEOP SPAs
The IMA on SIP-400 for 24xT1/E1 CEOP and 1xOC3 CEOP SPAs feature adds support for Inverse Multiplexing over ATM (IMA).
For more detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html#wp102076
IP SLAs Metro-Ethernet 2.0 (EVC)
The IP SLAs Metro-Ethernet 2.0 (EVC) feature adds support for Ethernet Virtual Circuits (EVCs) to the existing IP SLAs for Metro-Ethernet feature. The IP SLAs for Metro-Ethernet feature provides the capability to gather Ethernet-layer network performance metrics.
For more detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_metro_ethernet.html
IP Source Guard for Service Instance
For more detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_sw_config.html
ISG: Authentication: DHCP Option 60 and Option 82 with VPN-ID Support for Transparent Automatic Logon
This feature enables service providers to provision triple-play services to households by supporting transparent automatic logon through DHCP option 60 and option 82, and wholesale IP sessions through VPN ID extension to option 82.
For more detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_auth_dhcp_op60_82.html
ISG Support for SAMI Blade
This feature combines the subscriber management features and functions of ISG with the processing power of the Cisco SAMI blade.
For more detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_sup_sami_blade.html
ISSU - 802.3ah OAM Support
The ISSU — 802.3ah OAM Support feature allows software to be upgraded or downgraded without disrupting packet flow.
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_oam.html
ISSU Support in CFM 802.1ag/1.0d
ISSU is automatically enabled in CFM and lowers the impact that planned maintenance activities have on network availability by allowing software changes while the system is in service.
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_cfm.html
ISSU Support in E-LMI
ISSU allows you to perform a Cisco IOS software upgrade or downgrade without disrupting packet flow. ISSU allows these software changes while the system is in service.
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_elmi-pe.html
L2 Access Control List on EVC
This is a security feature which customers can use to filter packets under an EVC based on MAC addresses.
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_l2acl-evc.html
L2 Classification on Default EVC
This features enables select QoS support (classification, marking, police, shaping) on EVCs (service instances) with encapsulation default.
http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_and_configuration_guides_list.html
L2TPv3 - Layer-2 Tunneling Protocol Version 3
This feature adds support for Layer-2 Tunneling Protocol Version 3 to ES40 line cards. See the following publications:
L2VPN Interworking: Ethernet VLAN to ATM AAL5
Layer 2 transport allows connectivity of sites over an IP/MPLS network. If different transport types are present at each end then creating a layer 2 connection is impossible without interworking. This feature allows interworking at layer 2 between, Ethernet VLANs and ATM VCs/FR/PPP. This feature supports routed mode encapsulation for interworking Layer 2 transport allows connectivity of sites over AToM Pseudowires.
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_intrntwkg.html
LACP support for EVC port channel
Adds support for Link Aggregate Control Protocol (LACP) to Ethernet virtual circuit (EVC) port channels. See the following publications:
MAC Address Limiting on Service Instance / Bridge Domain
See the following publication:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_mac-addlmt-bdsin.html
MAC Address Security for EVC Bridge-Domain
Provides the capability to control and filter the MAC address learning behavior at the granularity of a single EVC service instance.
Mini Protocol Analyzer
The mini protocol analyzer allows network administrators to select and then capture Layer 2 and Layer 3 protocol traffic for network diagnostics purposes. The packet capture utilizes SPAN functionality and is performed in band without service disruption.
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/mpa.html
MST on EVC Bridge-Domain
Enables multiple spanning tree (MST) on EVC interfaces. The forwarding behavior of EVCs on these interfaces is determined by the spanning tree state of their router VLAN.
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_sw_config.html
NSF/SSO - 802.3ah OAM Support
The NSF/SSO — 802.3ah OAM Support feature allows processes which support dual route processors in active/standby mode to continue forwarding packets following a switchover.
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_oam.html
NSF/SSO Support in CFM 802.1ag/1.0d
The redundancy configurations Stateful Switchover (SSO) and Non-Stop Forwarding (NSF) are both supported in Ethernet CFM and are automatically enabled. A switchover from an active to a standby RP occurs when the active RP fails, is removed from the networking device, or is manually taken down for maintenance. NSF interoperates with the SSO feature to minimize network downtime following a switchover. The primary function of Cisco NSF is to continue forwarding IP packets following an RP switchover.
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_cfm.html
NSF/SSO Support in E-LMI
The redundancy configurations SSO and NSF are supported in Ethernet LMI and are automatically enabled. The primary function of Cisco NSF is to continue forwarding IP packets following a route processor switchover. NSF also interoperates with the SSO feature to minimize network downtime following a switchover.
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_elmi-pe.html
Port Mode Cell Relay support on Cisco 7600/SIP
See the following publications:
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html#wp102076
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_any_transport.html
Private Host on Interface VLAN
This feature configures a server MAC address to the LAN port to allow isolated ports to be able to access to external server.
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html#wp102076
RSVP Support for IP Sessions
The RSVP Support for IP Sessions feature allows Resource Reservation Protocol (RSVP) and Intelligent Services Gateway (ISG) to coexist in a structured framework in which edge access devices can deliver flexible and scalable services that include voice on demand (VoD) call admission control (CAC) to subscribers.
Shaping on ES20 Main Interface
This feature enables the shaping support in class-default of a policy-map configured on ES20 main interface
http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_and_configuration_guides_list.html
SLB: Access Service Network (ASN) R6 Load
Load Balancing is supported across Access Service Network Gateways.
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_slb.html
Unidirectional Ethernet on 7600-ES20 Line Cards
UniDirectinal Ethernet (UDE) is a feature that allows it allows a Gigaport to unidirectionally transmit and receive traffic.
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
Uni-Directional Link Detection on ES20 Ports with EVCs
The feature supports handling of UDLD protocol PDUs when service instances are configured on an ES20 port.
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
Y.1731 Fault Management Functions
The Y.1731 Fault Management Functions feature defines new functionality for fault and performance management to serve the needs of service providers in large networks. These enhancements extends the functionality of Ethernet Alarm Indication Signal (ETH-AIS) and Ethernet Remote Defect Indication (ETH-RDI). The enhanced functionality includes, fault detection, fault verification and fault isolation for large Ethernet Metropolitan-Area Networks (MANs) and Wide-Area Networks (WANs).
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_cfm-ieee_y1731.html
New Hardware Features in Cisco IOS Release 12.2(33)SRC2
There are no new hardware features in Cisco IOS Release 12.2(33)SRC2.
New Software Features in Cisco IOS Release 12.2(33)SRC2
This section describes new and changed features in Cisco IOS Release 12.2(33)SRC2. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRC2. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
BGP VPLS AD Route Reflector Without L2VPN Support
Enables BGP VPLS AD route reflector without L2VPN support. L2VPN can be supported even when L2VPN is not present in the image.
Shaping on Cisco 7600-ES20 Main Interface
This featurette enables the shaping support in class-default of a policy- map configured on ES20 main interface.
UniDirectional Ethernet on Cisco 7600-ES20 Line Cards
UniDirectinal Ethernet (UDE) is a feature which allows it allows a Gigaport to unidirectionally transmit or receive traffic. So instead of using two strands of fiber for a full-duplex Gigaport Ethernet port, it only uses one strand of fiber which is to either transmit or receive the one-way traffic for the Gigaport, depending on which direction the Gigaport is configured.
New Hardware Features in Cisco IOS Release 12.2(33)SRC1
This section describes new and changed features in Cisco IOS Release 12.2(33)SRC1. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRC1. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
SPA-4XT-Serial (Cisco 4-Port Serial Shared Port Adapter) support on Cisco 7600/SIP200
This feature introduces the SPA-4XT-Serial support on 7600/SIP200, each supporting six different cable standards V35,X21, RS232, RS449, RS530, RS530A in two modes DTE, DCE. This is a clearchannel SPA integrated into the Cisco 7600 platform for SIP 200.
New Software Features in Cisco IOS Release 12.2(33)SRC1
This section describes new and changed features in Cisco IOS Release 12.2(33)SRC1. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRC1. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Access Service Network - Server Load Balancing (ASN-SLB)
Load Balancing is supported across Access Service Network Gateways.
LACP support for EVC Portchannel on ES-20
Through this feature Ethernet service instances earlier configurable only under physical ports can now be bundled as Ethernet ports to increase the capacity of a logical link and provide availability and redundancy. This feature supports service instances over bundled Ethernet links, so that ingress traffic for a single EVC can arrive on any member of the bundle while egress traffic for any ethernet flow point uses only a single assigned member link. EVC link bundling supports bridge-domain, xconnect and local switching.
New Hardware Features in Cisco IOS Release 12.2(33)SRC
This section describes new and changed features in Cisco IOS Release 12.2(33)SRC. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRC. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Cisco 7201 Router
The Cisco 7201 router is a Cisco 7200 router with a NPE-G2 engine in a 1RU fixed configuration form factor. This is the next generation Cisco 7301 that is equipped with four built-in Gigabit Ethernet (GE) ports and a port adapter (PA) slot.
CT3 CEoP on Cisco 7600-SIP-400
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
PA-MC-T3-EC and PA-MC-2T3-EC
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/pa-mc-t3-ec_install_config/mc-t3ec.htmlr09186a0080796f7f.html
Port Adapter Enhancements—2 New Clear Channel Port Adapters and Channelized PA Hardware Acceleration of MLPPP/MLFR/LFI/FRF12
For detailed information about these feature, see the following documents:
http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/pa-t3.e3-ec_install_config/te3e-ec.htmlok09186a008085de57.html
http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/pa-t3.e3-ec_install_config/te3e-ec.htmlok09186a0080796e92.html
RSP720-3C-10GE
The Cisco 7600 Series RSP 720-10GE is introduced on Cisco IOS 12.2(33)SRC on a limited orderability basis. For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Hardware_Guides/Supervisor_Engine_and_Route_Switch_Processor_Guide/76-sup-rsp.html
RSP720-3CXL-10GE
The Cisco 7600 Series RSP 720-10GE is introduced on Cisco IOS 12.2(33)SRC on a limited orderability basis. For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Hardware_Guides/Supervisor_Engine_and_Route_Switch_Processor_Guide/76-sup-rsp.html
Service and Application Module for IP
The Cisco Service and Application Module for IP (SAMI) is a new-generation high performance Cisco IOS software application module that occupies a single slot in the Cisco 7600 series router platform.
With an IXP2800 network processor flow-distributor running at 1.4GHz, and six PowerPCs (PPCs) running at 1.25GHz, each of which can run an instance of the same Cisco IOS image, the SAMI offers a parallel architecture for Cisco IOS mobile wireless applications.
The benefits of the SAMI architecture include the following:
- Increased processing power and session density
- Reduced inter-CPU data sharing
- Separation of the control plane and the data plane
- Improved management capabilities
- Less complex configuration
- Easier debugging
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/wireless/service_application_module/sami/user/guide/samiv1.html
SFP-GE-T Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
Shared Port Adapters
Cisco IOS Release 12.2(33)SRC introduces support for the following new shared port adapters (SPAs):
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
WiSM Support on Cisco 7600 Platform
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/wireless/technology/wism/installation/note/78_17121.html
WS-X6708-10G-3C, WS-X6708-10G-3CXL
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
New Software Features in Cisco IOS Release 12.2(33)SRC
This section describes new and changed features in Cisco IOS Release 12.2(33)SRC. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRC. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
32K EVC Scale
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html07e5826.html
7600 VRF-Aware Lawful Intercept
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html07e0acb.html
802.1P CoS—PPP & PPPoE Control Frames
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_cos_ppp_pppoe.html
ACFC and PFC Support on Multilink Interface on 7600/EnhancedFlexWAN/SIP200
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
AToM Tunnel Selection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_any_transport.html
Attribute Filtering Per-Domain and VRF Aware Framed-Routes
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_per_vrf_aaa.html
Attribute Screening for Access Requests
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_att_scrn_accreq.html
Authentication, Authorization, and Accounting (AAA) Features
Cisco IOS Release 12.2(33)SRC introduces support for the following AAA features.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_aaa_auth_cache.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_per_vrf_aaa.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_aaa_double_auth.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ha/configuration/guide/ha_aaa_pppox.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_accountg.html
The number of method lists that can be configured has been increased from 8 to 250.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_authentifcn.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_accountg.html
Cisco IOS software created a statically configurable number of processes to authenticate calls. Each process would handle a single call, but in some situations the limited number of processes could not keep up with the incoming call rate. This resulted in some calls timing out. The AAA-PPP-VPDN Non-Blocking feature changes the software architecture such that the number of processes do not limit the rate of call handling.
BFD—VRF Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
BFD—WAN Interface Support (STM, FR, POS, and Serial)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
BGP Per Neighbor Graceful Restart Configuration
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bgp_adv_features.html
Call Home
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/swcg.html
Calling Station ID Attribute 31
The radius-server attribute 31 command is a new command in Cisco IOS Release 12.2(31)SB2. This new command replaces the radius-server attribute 31 remote-id command, which was introduced in Release 12.2(28)SB. The new command adds two new keywords, mac and send , and includes the remote-id keyword from the original radius-server attribute 31 remote-id command.
Cisco Express Forwarding—SNMP CEF-MIB Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipswitch/configuration/guide/cef_snmp_mib.html
Cisco IOS Scripting with Tcl
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_script_tcl.html
CISCO-DATA-COLLECTION-MIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_mib_collect_trans.html
CISCO-IP-URPF-MIB Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_urpf_mib.html
CNS—Interactive CLI
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
CNS Config Retrieve Enhancement with Retry and Interval
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
Command Scheduler (Kron) Policy for System Startup
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_cns_services.html
Config Change Tracking Identifier
The Config Change Tracking Identifier feature assigns a version number to each saved version of the Cisco IOS running-config file and displays output about the versions. When the version number is updated, a notification of the change in version number is generated. The Config Logger can use this feature to determine if there have been any changes to the Cisco IOS running-config file. To enable the Config Change Tracking Identifier feature, enter the show config id command.
Configuration Enhancements for Broadband Scalability
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_preparing.html
Configuration Generation Performance Enhancement
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/config_cache.html
Connect-Info RADIUS Attribute 77
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_77_connect.html
Connection Accounting
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_accountg.html
CoPP Enhancements on SIP-400
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
DHCP—DHCP Server MIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_mib.html
DHCP—DHCPv6 Relay Agent Notification for Prefix Delegation
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html
DHCP—Server Multiple Subnet
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg.html
DHCP—Static Mapping
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg.html
DHCP—Statically Configured Routes Using a DHCP Gateway
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg.html
DHCP Authorized ARP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_acct_sec.html
DHCP ODAP Server Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_sod_apm.html
DHCP On Demand Address Pool (ODAP) Manager for Non-MPLS VPN Pools
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_sod_apm.html
DHCP Per Interface Lease Limit and Statistics
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_acct_sec.html
DHCP Relay—MPLS VPN Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_rly_agt.html
DHCP Relay Option 82—Per Interface Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_rly_agt.html
DHCP Release and Renew CLI in EXEC Mode
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_client.html
DHCP Secured IP Address Assignment
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_acct_sec.html#wp1094512
DHCP Server—On Demand Address Pool Manager
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_sod_apm.html
DHCP Server Import All Enhancement
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg.html
DHCPv6—Relay—Reload Persistent Interface ID Option
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html
DHCPv6 Ethernet Remote ID Option
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html
Digital Optical Monitoring
The Digital Optical Monitoring (DOM) feature allows you to display transceiver operating conditions, such as temperature and power levels, while the transceiver is in service. Use the show interfaces transceiver command to display operating conditions.
Dynamic Per VRF AAA
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_per_vrf_aaa.html
Embedded Syslog Manager (ESM)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_esm_syslog.html
Encrypted Vendor-Specific Attributes
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_encrypt_ven_attr.html
Enhanced Test Command
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_enhanced_tst_cmd.html
EtherChannel Load Distribution
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_lnkbndl.html
EVC on Port-Channel
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Module_and_Line_Card_Installation_Guides/ES20_Line_Card_Installation_Guide/es20-install-guide.html
Extended NAS-Port-Type and NAS-Port Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_extd_nas_port.html
FHRP—HSRP Group Shutdown
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_hsrp.html
Framed-Route in RADIUS Accounting
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_frame_rte.html
Hot Fabric Sync
The switch fabric module functionality is built into the Supervisor Engine 720 and the RSP720. When a supervisor engine switchover occurs, a fabric switchover also occurs. During this process, the line cards must resynchronize with the new active switch fabric. The Hot Fabric Sync feature, which is enabled by default, keeps both the active and standby fabric in sync at the same time, minimizing the switchover time and thereby minimizing any impact on switch fabric traffic. To verify the fabric sync status of active and standby supervisors, enter the show fabric status command.
This feature is supported on the following chassis: Cisco 7603-S, Cisco 7604, Cisco 7606-S, and Cisco 7609-S. All WAN modules with DFC, SIP-200, SIP-400, and WS-67xx with DFC or CFC are supported.
HTTP TACACS+ Accounting Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/nm_http_web.html
H-VPLS N-PE Redundancy for MPLS Access
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_hvpls_npe_red.html
H-VPLS N-PE Redundancy for QinQ Access
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_hvpls_npe_red.html
IEEE 802.1x with DHCP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/swcg.html
IMA on SIP-400 for 24xT1/E1 CEOP and 1xOC3 CEOP SPAs
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.htmls_book09186a00802109bf.html
IP SLAs for MPLS Pseudo Wire (PWE3) via VCCV
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/sla_lsp_mon_autodisc.html
IPv6—CNS Agents
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—Config Logger
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—HTTP(S)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—IP SLAs (UDP Jitter, UDP Echo, ICMP Echo, TCP Connect)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—Netconf
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—SOAP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
IPv6—Tcl
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
Intelligent Service Gateway Features
Cisco IOS Release 12.2(33)SRC introduces support for the following ISG features.
ISG: Accounting: Per Session, Service, and Flow
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/cfg_isg_acctng.html
ISG: Accounting: Postpaid
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/cfg_isg_acctng.html
ISG: Authentication: DHCP Option 82 Line ID—AAA Authorization Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_pol_auto_sub_log.html
ISG: Flow Control: Flow Redirect (L4, Captive Portal)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_l4_redirect.html
ISG: Instrumentation: Advanced Conditional Debugging
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_tshoot_sa_dcd.html
ISG: Instrumentation: Session and Flow Monitoring (Local and External)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_tshoot_sa_dcd.html
ISG: Network Interface: IP Routed, VRF-Aware MPLS
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html
ISG: Policy Control: DHCP Proxy
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_cntrl_policies.html
ISG: Policy Control: Multidimensional Identity per Session
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_cntrl_policies.html
ISG: Policy Control: Policy: Domain-Based (Auto-Domain, Proxy)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_cntrl_policies.html
ISG: Policy Control: Policy Server: CoA (QoS, L4 Redirect, User ACL, TimeOut)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/en_isg_ext_plcy_svrs.html
ISG: Policy Control: Policy Server: CoA ASCII Command Code Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/en_isg_ext_plcy_svrs.html
ISG: Policy Control: Policy Server: SSG-SESM Protocol
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_cntrl_policies.html
ISG: Policy Control: Policy: Triggers (Time, Volume, Duration)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_cntrl_policies.html
ISG: Policy Control: Service Profiles
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_cntrl_policies.html
ISG: Policy Control: User Profiles
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_cntrl_policies.html
ISG: Session: Auth: PBHK
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_port_bundle_hkey.html
ISG: Session: Auth: Single Sign On
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_overview.html
ISG: Session: Authentication (MAC, IP, EAP)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_pol_reg_net_accs.html
ISG: Session: Creation: Interface IP Session: L2
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html
ISG: Session: Creation: Interface IP Session: L3
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html
ISG: Session: Creation: IP Session: Protocol Event (DHCP,RADIUS)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html
ISG: Session: Creation: IP Session: Subnet and Source IP: L2
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html
ISG: Session: Creation: IP Session: Subnet and Source IP: L3
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html
ISG: Session: Creation: P2P Session (PPPoE, PPPoXoX)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_ppp_sessns.html
ISG: Session: LifeCycle: Idle Timeout
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_pol_sessn_maint.html
ISG: Session: LifeCycle: POD
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_pol_sessn_maint.html
ISG: Session: Protection and Resiliency: Keepalive—ARP, ICMP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_pol_sessn_maint.html
ISG: Session: VRF Transfer
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html
ISG: Subscriber Aware Ethernet
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_sub_aware_enet.html
In-Service Software Upgrade (ISSU)
Cisco IOS Release 12.2(33)SRC and later releases support the following ISSU features:
- ISSU—AToM ATM Attachment Circuit
- ISSU—AToM FR/MFR Attachment Circuit
- ISSU—AToM HDLC Attachment Circuit
For detailed information about these features, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_trnsprt_mlps_atom.html#wp1115583
- ISSU—DHCP ODAP Client/Server
- ISSU—DHCP Proxy Client
- ISSU—DHCP Relay on Unnumbered Interface
- ISSU—DHCP Server
For detailed information about these features, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp-sso_ha.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ha_svc_sw_up.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpls_atom.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ha/configuration/guide/ha-inserv_updg.html#wp1062261
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_vrrp.html
KEOPS Phase 2 Access Circuit Redundancy with Local Switching
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
LACP 1-1 Redundancy with Fast Switchover
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/swcg.html
LACP Fast Rate
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/cether/command/reference/ce_book.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_lnkbndl.html
Layer 2 Tunneling Protocol Version 3
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/wan/configuration/guide/wan_l2_tun_pro_v3.html
Local AAA Server
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_loc_aaa_srvr.html
Message Banners for AAA Authentication
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_authentifcn.html
MPLS EM—MPLS VPN MIB RFC4382 Upgrade
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_em_vpn_mib_4382.html
MPLS LDP—Local Label Allocation Filtering
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_alloc_filter.html
MPLS LDP—Lossless MD5 Session Authentication
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_ldp_lossless_md5.html
MPLS Pseudowire Status Signaling
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_pw_status.html
MPLS TE—BFD-Triggered Fast Reroute (FRR)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_bfd_frr.html
MPLS TE—Bundled Interface Support (EtherChannel and MLPPP)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_bundle_interface.html
MPLS TE—Tunnel-Based Admission Control (TBAC)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/qos_mpls_te_tbac.html
MPLS TE—Fast Reroute Path Protection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_path_prot.html
MPLS VPN—Inter-AS Option AB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_ias_optab.html
MPLS VPN Half Duplex VRF (HDVRF)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_half_dup_vrf.html
MPLS VPN PE-CE Link Protection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_pece_lnk_prot.html
MQC—Traffic Shaping Overhead Accounting for ATM
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/overhead_acctng.html
Multicast VPN Extranet Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_mc_vpn_extranet.html
NAS-Port Format E
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_extd_nas_port.html
NAS-Port ID Format C Enhancement
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/vpdn/configuration/guide/config_aaa_for_vpdn.html
Network Accounting (RADIUS/TACACS+)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_accountg.html
NSF/SSO—AToM ATM Attachment Circuit
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_trnsprt_mlps_atom.html#wp1115583
NSF/SSO—AToM FR/MFR Attachment Circuits
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_trnsprt_mlps_atom.html#wp1115583
NSF/SSO—AToM HDLC Attachment Circuit
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_trnsprt_mlps_atom.html#wp1115583
NSF/SSO—Virtual Private LAN Services
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpls_atom.html
Offload Server Accounting Enhancement
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_offload_enhance.html
OSPF Graceful Shutdown
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_ospf_ttl.html
OSPF TTL Security Check
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_ospf_ttl.html
OSPFv2 Local RIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_ospf_local_rib.html
O SPFv3 Fast Convergence—LSA and SPF Throttling
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-ospf.html
Per Session Queuing and Shaping for PPPoEoVLAN Using RADIUS
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppoe_ses_q_rad.html
Per Subinterface MTU for Ethernet over MPLS (EoMPLS)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_any_transport.html
Per VRF AAA
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_per_vrf_aaa.html
Per-Session QoS
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/per_session_qos.html
Per-User Access-List
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_lock_key_secrty.html
Per-User QoS via AAA Policy Name
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_qos_aaa_policy.html
PPP MLP MRRU Negotiation Configuration
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/dial/configuration/guide/dia_pppmlp_mrru_neg.html
PPP-Max-Payload and IWF PPPoE Tag Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppp_mx_payld.html
PPPoE—QinQ Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_pppoe_qinq.html
PPPoE—Session Limiting on Inner QinQ VLAN
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_qinq_vlan_limt.html
PPPoE Agent Remote ID and DSL Line Characteristics Enhancement
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_rmtid_dsl.html
PPPoE Circuit-ID Tag Processing
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_cir_id_tag_pr.html
PPPoE Connection Throttling
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_pppoe_baa.html
PPPoE on Ethernet
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppoe_enet.html
PPPoE over Gigabit Ethernet Interface
The PPPoE over Gigabit Ethernet feature enhances PPP over Ethernet (PPPoE) functionality by adding support for PPPoE and PPPoE over IEEE 802.1Q VLANs on Gigabit Ethernet interfaces.
PPPoE over VLANs Scaling and PPPoE over VLANs Forwarding over PVC
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ppoe_vlan_enh.html
PPPoE RADIUS Port Identification
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_radius_psl.html
PPPoE Service Selection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_svc_callstup.html
PPPoE Session Count MIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_mon_pppoe_snmp.html
PPPoE Session Limit
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_limit_legcfg.html
PPPoE Session Limit per NAS Port
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ses_lim_nas.html
PPPoE Session Recovery After Reload
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_pppoe_baa.html
PPPoE Tag Support with Agent Remote ID Field
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_rmtid_dsl.html
PPPoEoE on SIP-400
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
Programmable BERT Patterns Enhancement on Channelized SPAs
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
QoS: Tunnel Marking for GRE Tunnels
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/tnl_mrkg_gre_tnls.html
RADIUS Attribute 5 (NAS-Port) Format Specified on a Per-Server Group Level
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_5_pre_serv.html
RADIUS Attribute 52 and 53 Gigaword Support
The RADIUS Attribute 52 and Attribute 53 Gigaword Support feature introduces support for Attribute 52 (Acct-Input-Gigawords) and Attribute 53 (Acct-Output-Gigawords) in accordance with RFC 2869. Attribute 52 keeps track of the number of times the Acct-Input-Octets counter has rolled over the 32-bit integer throughout the course of the provided service; attribute 53 keeps track of the number of times the Acct-Output-Octets counter has rolled over the 32-bit integer throughout the delivery of service. Both attributes can be present only in Accounting-Request records where the Acct-Status-Type is set to “Stop” or “Interim-Update.” These attributes can be used to keep accurate track of and bill for usage.
RADIUS Attribute 77 for DSL
The RADIUS Attribute 77 for DSL feature introduces support for attribute 77 (Connect-Info) to carry the textual name of the virtual circuit class associated with the given permanent virtual circuit (PVC). (Although attribute 77 does not carry the unspecified bit rate (UBR), the UBR can be inferred from the classname used if one UBR is set up on each class.) Attribute 77 is sent from the network access server (NAS) to the RADIUS server via Accounting-Request and Accounting-Response packets.
RADIUS Attribute Value Screening
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_attr_scrng.html
RADIUS Centralized Filter Management
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_central_filt.html
RADIUS DNIS Screening, RADIUS Packet of Disconnect (POD), ISDN Guard Timer
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_cfg_radius.html
RADIUS Logical Line ID
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_logic_lne_id.html
RADIUS NAS-IP-Address Configurability
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_nas_ip_cfg.html
RADIUS Per-VRF Server Group
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_per_vrf_aaa.html
RADIUS Progress Codes
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_rad_progrs_codes.html
RADIUS Push for MOD CLI Policies
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_vsa_pmap.html
RADIUS Route Download
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_route_dwnld.html
RADIUS Server Load Balancing
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_rad_load_bal.html
RADIUS Server Reorder on Fail
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_reorder_fail.html
Resilient Ethernet Protocol
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/lanswitch/configuration/guide/lsw_cfg_rep.html
Retransmit Counter for Exponential Backoff Accounting
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_radius_for_acct.html
RFC 4293 IP-MIB (IPv6 Only) and RFC 4292 IP-FORWARD-MIB (IPv6 Only)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
RSVP Aggregation
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/qos_rsvp_agg.html
SIP-400 Accelerated Lawful Intercept
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/lawful_intercept/76licfg.html
SLB (Server Load Balancing)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_slb.html
SLB: KAL-AP Agent Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_slb.html
SLB: RADIUS Loadbalancing Accelerated Data Plane Forwarding
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_slb.html
Source IPv4 and Source MAC Address Binding
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
SPAN Destination Port Support on Etherchannels
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/swcg.html
SPAN Egress Session Increase
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/swcg.html
SSO—BFD (Admin Down)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
SSO—DHCP ODAP Client/Server
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp-sso_ha.html
SSO—DHCP Proxy Client
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp-sso_ha.html
SSO—PPPoE
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_ha_stfl_swovr.html
SSO—Virtual Template Manager
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ha/configuration/guide/ha-stfl_swovr.html
SSO—VRRP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/ipapp/configuration/guide/ipapp_vrrp.html
Static Routes for BFD
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_bfd.html
Sticky IP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_rad_8_accss_req.html
Subscriber Service Switch
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_cfg_sss_pol.html
Switch Port Analyzer (SPAN)—Input Packets with Don’t Learn Option
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/swcg.html
TDM Local Switching
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
Throttling of AAA (RADIUS) Records
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_throtl_aaa.html
VPLS MAC Address Withdrawal
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_hvpls_npe_red.html
VTP v3
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/swcg.html
New Hardware Features in Cisco IOS Release 12.2(33)SRB3
This section describes new and changed features in Cisco IOS Release 12.2(33)SRB3. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRB3. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
CWDM-SFP
CWDM-SFP provides optical pluggable support on Cisco 7600-ES20-GE3C and Cisco 7600-ES20-GE3CXL line cards.
DWDM-XFP
DWDM-XFP provides optical pluggable support on Cisco 7600-ES20-10G3C, Cisco 600-ES20-10G3CXL, and Cisco 7600-SIP-600/SPA-1X10GE-L-V2 line cards.
DWDM-XFP-30.33, DWDM-XFP-31.12, DWDM-XFP-31.90, DWDM-XFP-32.68,
DWDM-XFP-34.25, DWDM-XFP-35.04, DWDM-XFP-35.82, DWDM-XFP-36.61,
DWDM-XFP-38.19, DWDM-XFP-38.98, DWDM-XFP-39.77, DWDM-XFP-40.56,
DWDM-XFP-42.14, DWDM-XFP-42.94, DWDM-XFP-43.73, DWDM-XFP-44.53,
DWDM-XFP-46.12, DWDM-XFP-46.92, DWDM-XFP-47.72, DWDM-XFP-48.51,
DWDM-XFP-50.12, DWDM-XFP-50.92, DWDM-XFP-51.72, DWDM-XFP-52.52,
DWDM-XFP-54.13, DWDM-XFP-54.94, DWDM-XFP-55.75, DWDM-XFP-56.55,
DWDM-XFP-58.17, DWDM-XFP-58.98, DWDM-XFP-59.79, DWDM-XFP-60.61
New Software Features in Cisco IOS Release 12.2(33)SRB3
There are no new software features in Cisco IOS Release 12.2(33)SRB3.
New Hardware Features in Cisco IOS Release 12.2(33)SRB1
This section describes new and changed features in Cisco IOS Release 12.2(33)SRB1. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRB1. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Cisco 7603-S Router
For detailed information about the small-form factor Cisco 7603-S (CISCO7603-S), see the Cisco 7600 Series Router Installation Guide :
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Chassis_Installation/7600_Series_Router_Installation_Guide/cis_76xx.html
Cisco 7606-S Router
For detailed information about the small-form factor Cisco 7603-6 (CISCO7606-S), see the Cisco 7600 Series Router Installation Guide :
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Chassis_Installation/7600_Series_Router_Installation_Guide/cis_76xx.html
New Software Features in Cisco IOS Release 12.2(33)SRB1
This section describes new and changed features in Cisco IOS Release 12.2(33)SRB1. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRB1. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
1 Rate 2 Color per EVC Policer
For detailed information about this feature, see the “Configuring QoS on the Cisco 7600 Series Ethernet Services 20G Line Card” chapter in the Cisco 7600-ES20 Ethernet Line Card Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
AToM Support over GRE
For detailed information about this feature, see the “Configuring the Fast Ethernet and Gigabit Ethernet SPAs” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
ATM Pseudowire Redundancy
For detailed information about this feature, see the L2VPN Pseudowire Redundancy document:
http://www.cisco.com/en/US/docs/ios/wan/configuration/guide/wan_l2vpn_pw_red_external_docbase_0900e4b1805e9066_4container_external_docbase_0900e4b1806a218a.html
Backup Interface for Flexible UNI
For detailed information about this feature, see the following documents:
- The “Configuring the Cisco 7600 Series Ethernet Services 20G Line Card” chapter in the Cisco 7600-ES20 Ethernet Line Cards Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
- The “Configuring the Fast Ethernet and Gigabit Ethernet SPAs” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Enhanced Fast Software Upgrade (eFSU)
The Enhanced Fast Software Upgrade (eFSU) feature was introduced in Cisco 12.2(33)SRB. Cisco IOS Release 12.2(33)SRB1 adds support for the Route Switch Processor 720 (RSP720). For detailed information about this feature, see the “ISSU and eFSU on Cisco 7600 Series Router” chapter in the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR :
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/efsuovrw.html
In-Service Software Upgrade (ISSU)
Cisco IOS Release 12.2(33)SRB1 and later releases support the following ISSU features:
For detailed information about these features, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/iscli28.html
For detailed information about these features, see the “ISSU and eFSU on Cisco 7600 Series Router” chapter in the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR :
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/efsuovrw.html
For detailed information about these features, see Cisco IOS In Service Software Upgrade Process :
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/sbisefsu.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srmtrdoc.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/glbpissu.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/hsrpissu.html
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbisissu.html
IP SLAs Features
Cisco IOS IP SLAs features provide the capability to verify service guarantees, increase network reliability by validating network performance, proactively identify and alert users about network issues or deviations, and increase Return on Investment (ROI) by easing the deployment of new IP services. Cisco IOS IP SLAs use active probing techniques for end-to-end quantitative measurement of network performance, health, and connectivity for Voice over IP (VoIP), Multiprotocol Label Switching (MPLS), and TCP/IP networks. The IP SLAs features are also directly integrated with other Cisco IOS products such as Optimized Edge Routing (OER), Enhanced Object Tracker (EoT), and Embedded Event Manager (EEM).
Cisco IOS Release 12.2(33)SRB1 and later releases support the following IP SLAs features:
- IP SLAs - DHCP Operation
- IP SLAs - Distribution of Statistics
- IP SLAs - DNS Operation
- IP SLAs - FTP Operation
- IP SLAs - HTTP Operation
- IP SLAs - ICMP Echo Operation
- IP SLAs - ICMP Path Echo Operation
- IP SLAs - MPLS VPN Aware
- IP SLAs - Multi-Operation Scheduler
- IP SLAs - One-way Measurements
- IP SLAs - Path Jitter
- IP SLAs - Reaction Threshold
- IP SLAs - Scheduling
- IP SLAs - TCP Connect Operation
- IP SLAs - UDP Echo Operation
- IP SLAs - UDP Jitter Operation
- IP SLAs - UDP VoIP Operation
- IP SLAs - VoIP Threshold Traps
Cisco IOS IP SLAs configuration information is included in the Cisco IOS IP SLAs Configuration Guide, Release 12.4T :
http://www.cisco.com/en/US/products/ps6441/products_installation_and_configuration_guides_list.html
Cisco IOS IP SLAs command reference information is included in the Cisco IOS IP SLAs Command Reference, Release 12.2SR :
http://www.cisco.com/en/US/docs/ios/ipsla/configuration/guide/12_2sr/sla_12_2sr_book.html
MPLS VPN 6VPE Support over IP Tunnels
For detailed information about this feature, see the “Implementing IPv6 VPN over MPLS (6VPE)” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/
products_configuration_guide_chapter09186a00807d26c0.html#wp1049404MTU Support on MLP Interfaces
For detailed information about this feature, see the “Configuring the SIPs and SSC” chapter in the in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
Multi-VRF Selection using Policy Based Routing (PBR)
The Multi-VRF Selection using Policy Based Routing (PBR) feature allows a specified interface on a provider edge (PE) router to route packets to Virtual Private Networks (VPNs) based on match criteria defined in an Internet Protocol (IP) access list or based on packet length.
Out of Band Clocking
For detailed information about this feature, see the “Configuring the CEoP and Channelized ATM SPAs” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guid e:
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Session Border Controller
For detailed information about this feature, see the Cisco 7600 Series Routers Session Border Controller Configuration Guide :
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
New Hardware Features in Cisco IOS Release 12.2(33)SRB
This section describes new and changed features in Cisco IOS Release 12.2(33)SRB. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRB. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
New Chassis and Power Supply
Cisco IOS Release 12.2(33)SRB introduces support for the following chassis and power supply:
- Enhanced 9-Slot CISCO7609 Chassis: CISCO7609-S
For detailed information about this chassis, see the Cisco 7600 Series Router Installation Guide :http://www.cisco.com/en/US/docs/routers/7600/Hardware/Chassis_Installation/7600_Series_Router_Installation_Guide/cis_76xx.html
- PWR-6000-DC
For detailed information about this power supply, see the Cisco 7600 Series Router Installation Guide :http://www.cisco.com/en/US/docs/routers/7600/Hardware/Chassis_Installation/7600_Series_Router_Installation_Guide/cis_76xx.html
New Line Cards
Cisco IOS Release 12.2(33)SRB introduces support for the following line cards:
– Distributed Forwarding Card 3CXL (DFC3CXL) for use on CEF720 modules: WS-F6700-DFC3CXL
– Distributed Forwarding Card 3C (DFC3C) for use on CEF720 modules: WS-F6700-DFC3C
For detailed information about these line cards, see the Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR :
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/intro.html
– 2-port version Ethernet Services (7600 ES20) Line Card: 7600-ES20-10G
– 20-port Ethernet Services (7600 ES20) Line Card: 7600-ES20-GE
For detailed information about these line cards, see the Cisco 7600 Series Ethernet Services 20G Line Card Hardware Installation Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Note • DOM is not supported on WS-X6724/6748-SFP LAN Cards.
For addtional information about this feature, see the following document:
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
New Modules
Cisco IOS Release 12.2(33)SRB introduces support for the following module:
For detailed information about this module, see the Cisco Application Control Engine Module Installation Note :
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/installation/note/aceinote.html
New Route Switch Processors
Cisco IOS Release 12.2(33)SRB introduces support for the following Route Switch Processors (RSPs):
For detailed hardware information about these RSPs, see the “Route Switch Processors and Supervisor Engines” chapter in the Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide :
http://www.cisco.com/en/US/docs/routers/7600/Hardware/Hardware_Guides/Supervisor_Engine_and_Route_Switch_Processor_Guide/SupE02_ps368_TSD_Products_Installation_Guide_Chapter.html
For software configuration information and new feature descriptions, see the “Configuring a Route Switch Processor 720” chapter in the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR :
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
New SPAs
Cisco IOS Release 12.2(33)SRB introduces support for the following shared port adapters (SPAs):
– 1-port channelized OC-3 STM1 ATM CEoP SPA (SPA-1CHOC3-CE-ATM)
– 24-port channelized T1/E1/J1 ATM CEoP SPA (SPA-24CHT1-CE-ATM)
For detailed information about the CEoP SPA, see the “Overview of the CEoP and Channelized ATM SPAs” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
For detailed information about the SPA-2x1GE-V2, see the “Overview: Cisco 7600 Series Router Shared Port Adapters” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide :
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
Note The SPA-5x1GE-V2 was introduced in Cisco IOS Release 12.2(33)SRA for the SIP-600. Release 12.2(33)SRB adds support for the SPA-5x1GE-V2 on the SIP-400. For detailed information about the SPA-5x1GE-V2, see the “Overview: Cisco 7600 Series Router Shared Port Adapters” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
New Software Features in Cisco IOS Release 12.2(33)SRB
This section describes new and changed features in Cisco IOS Release 12.2(33)SRB. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRB. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
1024 MLP Bundles
The number of MLP bundles that are supported on a SIP-200 has been increased from 256 to 1024.
For detailed information about the SIP-200, see the “Overview of the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Alarm Filtering Support in the Cisco Entity Alarm MIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t4/nmhtalrm.html
Any Transport over MPLS Features
Cisco IOS Release 12.2(33)SRB introduces support for the following Any Transport over MPLS (AToM) features.
- Any Transport over MPLS (AToM): ATM Cell Relay over MPLS: Packed Cell Relay
- Any Transport over MPLS (AToM) Graceful Restart
- Any Transport over MPLS (AToM): Ethernet over MPLS (EoMPLS)
- Any Transport over MPLS (AToM): Frame Relay over MPLS (FRoMPLS)
- Any Transport over MPLS (AToM): Static Pseudowire Provisioning
- Any Transport over MPLS (AToM): Tunnel Selection
For detailed information about the above-mentioned AToM features with the exception of the Any Transport over MPLS (AToM) Graceful Restart feature and the Any Transport over MPLS (AToM): Tunnel Selection feature, see the Any Transport over MPLS document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsatom28.html
For detailed information about the Any Transport over MPLS (AToM) Graceful Restart feature, see the AToM Graceful Restart document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsgr29s.html
For detailed information about the Any Transport over MPLS (AToM): Tunnel Selection feature, see the Any Transport over MPLS (AToM): Tunnel Selection document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srtunsel.html
Bandwidth-Based Local Call Admission Control (CAC) Policy for IP Multicast
For detailed information about this feature, see the Per Interface Mroute State Limit with Bandwidth Based CAC for IP Multicast document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srmcac.html
Bidirectional Forwarding Detection Features
Cisco IOS Release 12.2(33)SRB introduces support for the following Bidirectional Forwarding Detection (BFD) features.
- BFD Echo Mode
- Bidirectional Forwarding Detection (BFD) Standard Implementation
- BFD Version 1 Support
For detailed information about these features, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fs_bfd.html
BGP Neighbor Policy
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbgpnp.html
BGP Per Neighbor SOO Configuration
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htbgpsoo.html
BGP Route-Map Continue Support for Outbound Policy
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbgprco.html
BGP Selective Address Tracking
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbgpsn.html
BGP Support for MTR
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbgpmtr.html
BGP Support for the L32VPN Address Family
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbgpl2v.html
BITS Clock Support - Receive and Distribute
For detailed information about this feature, see the “Configuring the CEoP and Channelized ATM SPAs” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
CNS Image Agent
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbcnsia.html
Compact Generic Attribute Registration Protocol (cGVRP)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbcgvrp.html
Configuration Partitioning
The Configuration Partitioning feature provides modularization (“partitioning”) of the running configuration state to provide granular access to the running configuration in Cisco IOS software. This feature is enabled by default in Cisco IOS software images that include this feature.
The Configuration Partitioning feature allows the system to group the configuration state of the device into parts (called “partitions”) so that only the configuration state the user wishes to review is retrieved when a user issues the show running-config partition part command. This feature improves performance for high-end systems with complex configurations because only a part of the running configuration state is processed when generating the running configuration command list, as opposed to the existing method of processing the entire system configuration state.
Default configuration partitions are provided by the introduction of this feature; other Cisco IOS software features may define their own command partitions in later releases.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/cnfprts.html
802.1ag and 802.3ah Interworking
For detailed information about this feature, see the Ethernet Connectivity Fault Management document:
http://www.cisco.com/en/US/docs/ios/12_2sx/12_2sxh/feature/guide/sxh_cfm.html
Configuring Ethernet Local Management Interface on a Provider Edge Device
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbpelmi.html
Ethernet Local Management Interface
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htethlmi.html
IEEE 802.3ad Link Bundling
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbcelacp.html
Outward Facing MEP
For detailed information about this feature, see the Ethernet Connectivity Fault Management document:
http://www.cisco.com/en/US/docs/ios/12_2sx/12_2sxh/feature/guide/sxh_cfm.html
Control Plane DSCP Support for RSVP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/dscprsvp.html
Disk File System Enhancements - ATA Enhancements and FAT32 Support
The Disk File System Enhancements - ATA Enhancements and FAT32 Support feature adds support in Cisco IOS software-based devices for flash cards that have been formatted with partitions on external devices. This feature also provides support for larger disk sizes through FAT32 support and support for disk partitions. In most scenarios, no user configuration is required to take advantage of this feature. Additional file system information is now available through existing command-line interface (CLI) commands. See the documentation of the format command for additional information about reformatting flash-based devices.
Additional file system enhancements that are introduced with this feature improve the performance and reliability of the system as a whole. The disk file system enhancements implemented as part of this feature include shared data structures, control structures, and other file system functions that apply to flash disks in various formats, such NVRAM, ATA flash disks, linear flash, USB flash, and the system RAM.
Dynamic Host Configuration Protocol Features
Cisco IOS Release 12.2(33)SRB introduces support for the following Dynamic Host Configuration Protocol (DHCP) features. For detailed information about these features, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbdhcpf.html
- DHCP Accounting: see the Configuring DHCP Services for Accounting and Security chapter.
- DHCP Address Allocation Using Option 82: see the Configuring the Cisco IOS DHCP Server chapter.
- DHCP Relay Subscriber Identifier Suboption of Option 82: see the Configuring the Cisco IOS DHCP Relay Agent chapter.
In addition, support for the following DHCP feature is introduced:
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbmultd.html
For the most recent information about the DHCP Server feature, see the Configuring the Cisco IOS DHCP Server document:
http://www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/htdhcpsv.html
For the most recent information about the DHCP Relay Agent, see the Configuring the Cisco IOS DHCP Relay Agent document:
http://www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/htdhcpre.html
Dual Priority Queue Support
For detailed information about this feature, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Enhanced Fast Software Upgrade
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/sbisefsu.html
- The “Enhanced Fast Software Upgrade on the Cisco 7600 Series Routers” chapter in the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR :
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/efsuovrw.html
EIGRP MIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gteigmib.html
EIGRP Support for MTR
For detailed information about this feature, see the Multi-Topology Routing document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srmtrdoc.html
Embedded Event Manager (EEM) 2.2
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/sr_eem22.html
Embedded Resource Manager (ERM)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/neverest_docs/stub_documents/nm_ermST.html
Embedded Resource Manager (ERM) - MIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/ermmib.html
Ethernet Local Management Interface (LMI) at Provider Edge (PE)
For detailed information about this feature, see the Configuring Ethernet Local Management Interface on a Provider Edge Device document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbpelmi.html
Ethernet OAM-Phase2/ELMI-PE
For detailed information about this feature, see the “Configuring the Fast Ethernet and Gigabit Ethernet SPAs” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
FHRP - HSRP Multiple Group Optimization
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbhsrmg.html
FHRP - Integration of Embedded Event Manager with Enhanced Object Tracking
For detailed information about this feature, which is also known as the FHRP - EOT integration with EEM feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbeotem.html
Flexible Mapping of QinQ (2-2, 2-1, 1-2, 1-1) and QinQ Service Awareness
For detailed information about this feature, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Flexible QinQ Mapping and Service Awareness
For detailed information about this feature, see the “Configuring the Cisco 7600 Series Ethernet Services 20G Line Card” chapter in the Cisco 7600-ES20 Ethernet Line Cards Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Hierarchical Quality of Service (HQoS) with Multipoint Bridging (MPB)
For detailed information about this feature, see the “Configuring QoS on the Cisco 7600 Series Ethernet Services 20G Line Card” chapter in the Cisco 7600-ES20 Ethernet Line Cards Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
HSRP for IPv6
For detailed information about these features, see the “Implementing IPv6 Addressing and Basic Connectivity” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
IGMP/PIM Snooping for VPLS Pseudowire
For detailed information about this feature for the Ethernet Services 20G line cards, see the “Configuring the Cisco 7600 Series Ethernet Services 20G Line Card” chapter in the Cisco 7600-ES20 Ethernet Line Cards Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
For detailed information about this feature for the SIP-400, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Interfaces MIB: SNMP Context-based Access
The interface MIB (IF-MIB) has been modified to support context-aware packet information in Virtual Route Forwarding (VRF) environments. VRF environments require that contexts apply to Virtual Private Networks (VPNs) so that clients can be given selective access to the information stored in the IF-MIB. Clients that belong to a particular VRF can access information about the interface from the IF-MIB that belongs to that VRF only. When a client tries to get information from an interface that is associated with a particular context, the client can see only the information that belongs to that context and cannot see IF-MIB information that is associated with interfaces that are connected to another VRF to which it is not entitled. No commands have been modified or added to support this feature.
The IF-MIB supports all tables that are defined in RFC 2863 and the CISCO-IFEXTENSION-MIB.
IP Multicast Load Splitting—Equal Cost Multipath (ECMP) Using S, G and Next Hop
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbmpath.html
IP SLAs for Metro-Ethernet
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/sr_meth.html
IP SLAs - LSP Health Monitor with LSP Discovery
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srpdisc.html
IP SLAs Random Scheduler
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/sr_slars.html
IPv6 ACL Extensions for Mobile IPv6
For detailed information about this feature, see the “Implementing Mobile IPv6” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/docs/ios-xml/ios/ipv6/configuration/12-2sr/ip6-mobile.html
IPv6 Routing - EIGRP Support
For detailed information about this feature, see the “Implementing IPv6 VPN over MPLS (6VPE)” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
IPv6 VPN over MPLS (6VPE)
For detailed information about this feature, see the “Implementing Mobile IPv6” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mobile_ps6441_TSD_Products_Configuration_Guide_Chapter.html
IS-IS MIB
For detailed information about these features, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2/12_2sg/feature/guide/ismibspt.html
IS-IS Support for an IS-IS Instance per VRF for IP
For detailed information about these features, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/vrf_isis.html
IS-IS Support for MTR
For detailed information about this feature, see the Multi-Topology Routing document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srmtrdoc.html
L2VPN Pseudowire Redundancy
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fspseudo.html
For information about limitations of the L2VPN Pseudowire Redundancy feature in Cisco IOS Release 12.2(33)SRB, see the “Limitations and Restrictions in Cisco IOS Release 12.2(33)SRB” section.
L2 VPN Pseudowire Switching
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsstitch.html
VPLS Autodiscovery: BGP-Based
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/fs_vpls.html
Lawful Intercept
For detailed information about this feature, see the following Cisco 7600 Lawful Intercept Configuration Guide :
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/lawful_intercept/76licfg.html
For information about the Lawful Intercept feature on the SIP-400, see the “Overview of the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Layer 2 Local Switching - Same-Port Switching for Frame Relay
For detailed information about this feature, see the following Layer 2 Local Switching document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fslocal.html
Logging to Local Non-Volatile Storage (ATA Disk)
For detailed information about this feature, see the SYSLOG Writing to Flash document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/cs_sysls.html
MPLS EM - MPLS LDP MIB - RFC 3815
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/ldpmbrfc.html
MPLS EM - MPLS LSR MIB - RFC 3813
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/lsrmbrfc.html
MPLS EM - MPLS Multipath (ECMP) LSP Tree Trace
For detailed information about this feature, see the MPLS EM—MPLS LSP Multipath Tree Trace document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sb_mmtr.html
MPLS LDP - Autoconfiguration
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsldpaut.html
MPLS LDP - IGP Synchronization
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsldpsyn.html
MPLS LDP - MD5 Global Configuration
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sb_md5.html
MPLS LSP Ping/Traceroute for LDP/TE, and LSP Ping for VCCV
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/ht_lspng.html
MPLS TE - DS-TE (RFC-3270)
For detailed information about this feature, see the MPLS Traffic Engineering—DiffServ Aware (DS-TE) document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/dsteietf.html
MPLS TE - Fast Reroute over ATM
For detailed information about this feature, see the MPLS TE: Link and Node Protection, with RSVP Hellos Support (with Fast Tunnel Interface Down Detection) document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fslnph30.html
MPLS TE - Fast Tunnel Interface Down Detection
For detailed information about this feature, see the MPLS TE: Link and Node Protection, with RSVP Hellos Support (with Fast Tunnel Interface Down Detection) document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fslnph30.html
MPLS TE - Node Protection Desired Bit
For detailed information about this feature, see the MPLS TE: Link and Node Protection, with RSVP Hellos Support (with Fast Tunnel Interface Down Detection) document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fslnph30.html
MPLS VPN - Show Running VRF
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sb_svrf.html
MPLS VPN - VRF CLI for IPv4 & IPv6 VPNs
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/sr_mpvrf.html
MPLS VPN VRF Selection Using Policy Based Routing
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fs_pbrsv.html
MultiPoint Bridging over Ethernet
For detailed information about this feature, see the “Configuring the Cisco 7600 Series Ethernet Services 20G Line Card” chapter in the Cisco 7600-ES20 Ethernet Line Cards Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Multiprotocol BGP (MP-BGP) Support for CLNS
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/brbclns.html
Multi-Topology Routing
For detailed information about this feature, see the Multi-Topology Routing document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srmtrdoc.html
NDE for VRF Interfaces
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/nfvrfsrb.html
Netconf Access for Configuration over BEEP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbnetbe.html
NetFlow v9 for IPv6
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/nfv6xsrb.html
Network Clock Support
For detailed information about this feature, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Optimized Edge Routing (OER)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/sr_oer.html
Area Command in Interface Mode for OSPFv2
For detailed information about this feature, see the following document:
http://www.cisco.com/cisco/web/psa/default.html /td/doc/product/software/ios120/120newft/120limit/120s/120s29/ospfarea.htm
OSPF Enhanced Traffic Statistics for OSPFv2 and OSPFv3
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htostats.html
OSPF SNMP ifIndex Value for Interface ID
For detailed information about this feature, see the OSPF: SNMP ifIndex Value for Interface ID in OSPFv2 and OSPFv3 Data Fields document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/ht_ifndx.html
OSPF Support for MTR
For detailed information about this feature, see the Multi-Topology Routing document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srmtrdoc.html
Outward Facing MEP
For detailed information about this feature, see the Ethernet Connectivity Fault Management document:
http://www.cisco.com/en/US/docs/ios/12_2sx/12_2sxh/feature/guide/sxh_cfm.html
PBR over TE Tunnel
In Cisco IOS Release 12.2(33)SRB, hardware switching support is introduced for policy-based routing (PBR) packets that are sent over a traffic engineering (TE) tunnel interface on a Cisco 7600 series router. When a TE tunnel interface is configured by using the set interface command in a policy, the packets are processed in hardware. In previous releases, PBR packets that were sent over TE tunnels were fast-switched by route-processor software.
Per Interface Mroute State Limit
For detailed information about this feature, see the Per Interface Mroute State Limit with Bandwidth Based CAC for IP Multicast document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srmcac.html
Per Interface NetFlow
For detailed information about this feature, see the “Configuring NetFlow and NDE” chapter in the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR :
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/nde.html
Note The configuration granularity for IPv4 NetFlow Data Export (NDE) has changed from global to per-interface configuration granularity. Global enabling of NDE collection for IPv4 L3 interfaces is not available in Cisco IOS Release 12.2(33)SRB. For a Cisco 7600 series that perform NDE, configurations must be reviewed and modified to conform to the per-interface configuration guidelines.
Per IP Subscriber DHCP Triggered RADIUS Accounting
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/ipradacc.html
Per Subscriber/Per Protocol CoPP Support
For detailed information about this feature, see the “Overview of the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Percent Priority/Percent Bandwidth Support
For detailed information about this feature, see the “Overview of the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Private Hosts
For detailed information about this feature, see the “Private Hosts (Using PACLs)” chapter in the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR :
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
Pseudowire Emulation Edge-to-Edge MIBs for Ethernet and Frame Relay Services
For detailed information about this feature, see the Pseudowire Emulation Edge-to-Edge MIBs for Ethernet, Frame Relay, and ATM Services document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbpweatm.html
QoS Enhancement for Dual Priority Queues
For detailed information about this feature, see the “Configuring QoS on the Cisco 7600 Series Ethernet Services 20G Line Card” chapter in the Cisco 7600-ES20 Ethernet Line Cards Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
QoS/MQC Support for MTR
For detailed information about this feature, see the Multi-Topology Routing document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srmtrdoc.html
Rate Limiting Support for DAI and DHCP Snooping
For detailed information about this feature, see the “Configuring Denial of Service Protection” chapter in the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR document:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/dos.html
In addition, see the mls rate-limit unicast ip command in the Cisco 7600 Series Internet Router IOS Commands Reference, 12.2 SX :
http://www.cisco.com/en/US/partner/products/hw/routers/ps368/products_command_reference_chapter09186a0080172751.html
Reliable Delivery and Filtering for Syslog
For detailed information about this feature, see the Reliable Delivery for Syslog over BEEP document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htnmsylg.html
Remote Port Shutdown
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbrpsdn.html
RFC 3020 Multilink Frame Relay MIB Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/mfr_mib.html
Role-Based Access Control CLI Commands
For detailed information about this feature, see the Role-Based CLI Access document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtclivws.html
RSVP Application ID Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/ht_appid.html
RSVP Fast Local Repair (RSVP FLR)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/rsvp_flr.html
RSVP Interface-Based Receiver Proxy
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sx/feature/guide/rsvpprox.html
RSVP Refresh Reduction and Reliable Messaging
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsrelmsg.html
RSVP Scalability Enhancements
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/rsvpscal.html
Scalable EoMPLS
For detailed information about this feature, see the “Configuring the Cisco 7600 Series Ethernet Services 20G Line Card” chapter in the Cisco 7600-ES20 Ethernet Line Cards Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Scale for IP Subscriber Awareness over Ethernet
For detailed information about this feature, see the “IP Subscriber Awareness over Ethernet” chapter in the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR :
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/ipsuboe.html
Security ACLs
For detailed information about this feature, see the “Overview of the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
SNMP over IPv6
For detailed information about these features, see the “Managing Cisco IOS Applications over IPv6” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
SNMP Support for MTR
For detailed information about this feature, see the Multi-Topology Routing document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srmtrdoc.html
SNMPv3 - 3DES and AES Encryption Support
For detailed information about this feature, see the following AES and 3-DES Encryption Support for SNMP Version 3 document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/snmpv3ae.html
SLB: GPRS Load Balancing Maps
For detailed information about this feature, see the IOS Server Load Balancing Feature in IOS Release 12.2(33)SRB document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/slbsrb1.html
SLB: RADIUS Load Balancing Maps
For detailed information about this feature, see the IOS Server Load Balancing Feature in IOS Release 12.2(33)SRB document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/slbsrb1.html
SSO - DHCP Relay on Unnumbered Interface
For detailed information about this feature, see the ISSU and SSO—DHCP High Availability Features document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbdhcpha.html
SSO - DHCP Server
For detailed information about this feature, see the ISSU and SSO—DHCP High Availability Features document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbdhcpha.html
SSO - GLBP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srbssogl.html
SSO - Multilink Frame Relay
For detailed information about this feature, see the Stateful Switchover document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fssso20s.html
SSO - PPP
For detailed information about this feature, see the Stateful Switchover document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fssso20s.html
Support for IP-TUNNEL-MIB as per RFC4087
For detailed information about this feature, see the IP Tunnel MIB document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/iptunmib.html
Syslog over IPV6
For detailed information about these features, see the “Implementing IPv6 Addressing and Basic Connectivity” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
System Logging - EAL4 Certification Enhancements
Note Official EAL4 certification is not claimed by Cisco. This feature is part of current and planned enhancements which may qualify Cisco IOS Software for future certification.
This feature includes the following enhancements:
- The system logging process will now generate “audit start” and “audit stop” messages.
- The system logging process will now generate messages that include the date and time of an event, the type of event, the subject identity, and the outcome (success or failure) of an event.
- Changes to logging parameters will be logged.
- Further enhancements to minimize lost audit records.
VPLS and SVI-Based EoMPLS - Routed Pseudowire Support
The VPLS and SVI-Based EoMPLS - Routed Pseudowire Support feature makes it possible to route (Layer 3) as well as switch (Layer 2) frames for pseudowire connections between provider edge (PE) devices. Both point-to-point PE connections, in the form of Ethernet over MPLS (EoMPLS), and multipoint PE connections, in the form or Virtual Private LAN Services (VPLS), are supported. The ability to route frames to and from these interfaces now makes it possible to terminate a pseudowire into a Layer 3 network (VPN or global) on the same router, or to tunnel Layer 3 frames over a Layer 2 tunnel (EoMPLS or VPLS). The feature supports faster network convergence in the event of a physical interface or device failure through the MPLS Traffic Engineering (MPLS-TE) and Fast Reroute (FRR) features of the network. In particular, the feature enables MPLS TE-FRR protection for Layer 3 multicast over a VPLS domain.
To configure routing support for the pseudowire, configure an IP address and other Layer 3 features for the Layer 3 domain (VPN or global) in the virtual LAN (VLAN) interface configuration. The following example assigns the IP address 10.10.10.1 to the VLAN 100 interface, and enables Multicast PIM. (Layer 2 forwarding is defined by the VFI VFI100.)
ip address 10.10.10.1 255.255.255.0
The following example assigns an IP address 20.20.20.1 of the VPN domain VFI200. (Layer 2 forwarding is defined by the VFI VFI200.)
New Hardware Features in Cisco IOS Release 12.2(33)SRA1
There are no new hardware features in Cisco IOS Release 12.2(33)SRA1.
New Software Features in Cisco IOS Release 12.2(33)SRA1
This section describes new and changed features in Cisco IOS Release 12.2(33)SRA1. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRA1. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Per VRF for TACACS+ Servers
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gt_pvt.html
New Hardware Features in Cisco IOS Release 12.2(33)SRA
This section describes new and changed features in Cisco IOS Release 12.2(33)SRA. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRA. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Shared Port Adapters
Cisco IOS Release 12.2(33)SRA introduces support for the following new shared port adapters (SPAs):
– 1-port CHOC-3/CHSTM-1 SPA (SPA-1xCHSTM1/OC3)
– 1-Port 10 Gigabit Ethernet SPA, LANPHY XFP Optics (SPA-1XTENGE-XFP-V2)
– 4-port 10/100 Ethernet SPA TX (SPA-4X1FE-TX-V2)
– 8-port 10/100 Ethernet SPA TX (SPA-8X1FE-TX-V2)
– 5-port Gigabit Ethernet SPA, SFP Optics (SPA-5X1GE-V2)
– 10-Port Gigabit Ethernet SPA, SFP Optics (SPA-10X1GE-V2)
– 1-Port OC-48 POS/RPR SPA with SFP Optics (SPA-1XOC48POS/RPR)
– 2-Port OC-48 POS/RPR SPA with SFP Optics (SPA-4XOC48POS/RPR)
– 4-Port OC-48 POS/RPR SPA with SFP Optics (SPA-4XOC48POS/RPR)
For a complete list of all supported SPAs in Cisco IOS Release 12.2SR, see the Guide to Supported Hardware for Cisco 7600 Series Routers with Release 12.2SR .
For further information about SPAs, see the Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide :
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
New Software Features in Cisco IOS Release 12.2(33)SRA
This section describes new and changed features in Cisco IOS Release 12.2(33)SRA. Some features may be new to Cisco IOS Release 12.2SR but were released in earlier Cisco IOS software releases. Some features may have been released in earlier Cisco IOS software releases and have been changed in Cisco IOS Release 12.2(33)SRA. To determine if a feature is new or changed, see the feature history table at the beginning of the feature module for that feature. Links to feature modules are included in this section. If a feature listed in this section does not have a link to a feature module, that feature is documented only in the release notes, and information about whether the feature is new or changed will be available in the feature description provided in this section.
Any Transport over MPLS (AToM) Graceful Restart
Any Transport over MPLS (AToM) Graceful Restart (GR) assists neighboring routers that have MPLS AToM stateful switchover/nonstop forwarding (SSO/NSF) support and Graceful Restart to recover gracefully from an interruption in service. In Cisco IOS Release 12.2(33)SRA, AToM GR functions strictly in helper mode, which means it can only help other routers that are enabled with AToM SSO/NSF and GR to recover. If the router with AToM GR fails, its peers cannot help it recover. AToM GR is based on MPLS Label Distribution Protocol (LDP) Graceful Restart.
Note The NSF/SSO: Any Transport over MPLS and Graceful Restart feature (which is also referred to as “AToM SSO/NSF”) is not supported in Release 12.2(33)SRA. The AToM GR feature that is supported in Release 12.2(33)SRA refers to AToM GR helper mode.
For detailed information about this feature, see the AToM Graceful Restart document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsgr29s.html
Any Transport over MPLS (AToM): Tunnel Selection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srtunsel.html
AToM—VP Mode Cell Relay
The AToM—VP Mode Cell Relay feature is supported on the following shared port adapters:
For more information about the AToM—VP Mode Cell Relay feature, which is also referred to as the AToM: ATM Cell Relay over MPLS: VP Mode feature, see the “Configuring ATM VP to VP Local Switching with AAL0 Encapsulation” section and the “Layer 2 Local Switching-ATM to ATM” section in the Configuring Multiprotocol Label Switching on FlexWAN and Enhanced FlexWAN Modules document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/flexmpls.html
Also, see the Configuring the ATM SPAs document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgatm.html
AutoRP Enhancement
For detailed information about this feature, which is also referred to as the PIM Dense Mode Fallback Prevention in a Network Following RP Information Loss feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srautorp.html
BCP Support on MLPPP
For detailed information about this feature, see the “Configuring the 2-Port and 4-Port Channelized T3 SPAs” and “Configuring the 8-Port Channelized T1/E1 SPA” chapters in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
For information about how to configure this feature on the Enhanced FlexWAN module, see the “Configuring BCP over MLPPP (Trunk Mode Only)” section in the Cisco 7600 FlexWAN and Enhanced FlexWAN Modules Configuration Guide :
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html
BGP MIB Support Enhancements
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gt_bmibe.html
BGP Multicast Inter-AS (IAS) VPN
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/cs_bmiav.html
BGP Reduction in Transient Memory Usage
Cisco IOS Release 12.2(33)SRA has implemented a reduction in transient memory usage by BGP when BGP updates are built.
BGP Support for BFD
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srbgpbfd.html
BGP Support for Dual AS Configuration for Network AS Migrations
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srbgpdas.html
BGP Support for Fast Peering Session Deactivation
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srbsfda.html
BGP Support for IP Prefix Import from Global Table into a VRF Table
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt_bgivt.html
BGP Support for Named Extended Community Lists
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srnextcl.html
BGP Support for Next-Hop Address Tracking
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srbhnt.html
BGP Support for Sequenced Entries in Extended Community Lists
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srextseq.html
BGP Support for TCP Path MTU Discovery per Session
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srbgpmtu.html
Per-VRF Assignment of BGP Router-ID
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srbgprid.html
Suppress BGP Advertisement for Inactive Routes
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/sr_sbair.html
Bidirectional Forwarding Detection (BFD) Standard Implementation
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fs_bfd.html
Call Admission Control for IKE
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gtcallik.html
Certificate - ISAKMP Profile Mapping
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gt_isakp.html
Certificate - Storage Location Specification
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srpkicsl.html
Cisco IOS Login Enhancements
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gt_login.html
CNS
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/sr_cns.html
CNS Configuration Agent
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/sr_cnsca.html
CNS Enhanced Results Message
The CNS - Enhanced Results Message feature is documented as the cns config partial command change in the Cisco IOS Network Management Command Reference, Release 12.2 SR document:
http://www.cisco.com/en/US/docs/ios/netmgmt/configuration/guide/12_2sr/nm_12_2sr_book.html
CNS Event Agent
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/sr_cnsea.html
CNS Security Enhancement
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/ht_cnsse.html
CLNS Support for GRE Tunneling of IPv4 and IPv6 Packets in CLNS Networks
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtclnsv6.html
Command Scheduler
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3/feature/guide/g_kron.html
Configuration Change Notification and Logging
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtconlog.html
Configuration Logger Persistency
The Configuration Logger Persistency feature implements a “quick save” functionality. The aim is to provide a “configuration save” mechanism in which the time to save changes from the startup configuration is proportional to the size of the incremental changes (with respect to the startup configuration) that must be saved. The persisted commands from the Cisco IOS Configuration logger are used as an extension to the startup configuration. The saved command, which is used as an extension to the startup configuration, provides a quick-save ability. Rather than saving the entire startup configuration, Cisco IOS software now saves just the commands that were entered since the last startup configuration was generated.
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srmgtint.html
Configuration Replace and Configuration Rollback
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtrollbk.html
Configuration Versioning
For detailed information about this feature, see the Configuration Replace and Rollback document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtrollbk.html
Contextual Configuration Diff Utility
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gt_diff.html
Easy VPN
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t4/feature/guide/ft_admss.html
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftezvpnr.html
Easy VPN Client RSA - Signature Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtevcrsa.html
EIGRP Support for Route Map Filtering
For detailed information about this feature, see the EIGRP Route Map Support document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/gteigrpr.html
Embedded Event Manager (EEM) 2.1
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/sr_eem.html
Encrypted Multicast over GRE
The Encrypted Multicast over GRE feature, also referred to as secure multicast over Generic Routing Encapsulation (GRE), is integrated in Cisco IOS Software Release 12.2(33)SRA. This feature provides a secure and scalable solution to protect multicast traffic in an enterprise or managed service-provider environment. Each head-end device that is configured with an IP Security (IPsec) Virtual Private Network (VPN) shared port adapter (SPA) can support IPsec encrypted multicast traffic for up to 500 remote tunnels. The practical applications include voice, video, and data broadcast.
Note that this feature requires specific hardware, including a Cisco Catalyst 6500 series switch or a Cisco 7600 series router with an IPsec VPN SPA and a Services SPA Carrier (SSC) module: either an SPA-IPsec-2G or an 7600-SSC-400.
For detailed information, see the IPsec VPN Shared Port Adapter documentation:
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Enhanced Crashinfo File Collection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t11/feature/guide/gt_cricm.html
Enhanced Tracking Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/sretrac.html
Ethernet Connectivity Fault Management
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srethcfm.html
Ethernet Operations, Administration, and Maintenance
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srethoam.html
Exclusive Configuration Change Access and Access Session Locking
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt_exclu.html
Extended ACL Support for IGMP to Support SSM in IPv4
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srmcxacl.html
FHRP—Enhanced Object Tracking of IP SLAs
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/sreotsla.html
Note FHRP—Enhanced Object Tracking of IP SLAs is not stateful switchover (SSO)-aware and cannot be used with Hot Standby Routing Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), or Gateway Load Balancing Protocol (GLBP) in SSO mode. (CSCtd31237)
FHRP—Object Tracking List
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srobtrls.html
Front Side VRF for the IPsec VPN SPA
The VRF-Aware IPsec feature provides IP Security (IPsec) tunnel mapping to Multiprotocol Label Switching (MPLS) Virtual Private Networks (VPNs). By using the VRF-Aware IPsec feature, you can map IPsec tunnels to Virtual Routing and Forwarding (VRF) instances by using a single public-facing address.
A VRF instance is a per-VPN routing information repository that defines the VPN membership of a customer site attached to the Provider Edge (PE) router. A VRF comprises an IP routing table, a derived Cisco Express Forwarding (CEF) table, a set of interfaces that use the forwarding table, and a set of rules and routing protocol parameters that control the information that is included in the routing table. A separate set of routing and CEF tables is maintained for each VPN customer.
Front Door VRF (FVRF) and Inside VRF (IVRF) are central to understanding the feature.
Each IPsec tunnel is associated with two VRF domains. The outer encapsulated packet belongs to one VRF domain, called the FVRF, while the inner protected IP packet belongs to another domain called the IVRF. Another way of stating the same thing is that the local endpoint of the IPsec tunnel belongs to the FVRF while the source and destination addresses of the inside packet belong to the IVRF.
One or more IPsec tunnels can terminate on a single interface. The FVRF of all these tunnels is the same and is set to the VRF that is configured on that interface. The IVRF of these tunnels can be different and depends on the VRF that is defined in the Internet Security Association and Key Management Protocol (ISAKMP) profile that is attached to a crypto map entry.
In previous releases of the IPsec VPN SPA, VRF-Aware IPsec was supported, but FVRF was not; as of Cisco IOS Release 12.2(33)SRA, FVRF is supported.
For more information about the VRF-Aware IPsec feature, including Front Door VRF, see the VRF-Aware IPSec document:
http://www.cisco.com/en/US/docs/ios/sec_secure_connectivity/configuration/guide/sec_vrf_aware_ipsec.html
For information about configuring Front Side VRF on the IPsec VPN SPA, see the documents at the following location:
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
GRE Tunnel IP Source and Destination VRF Membership
For detailed information about this feature, see the Generic Routing Encapsulation Tunnel IP Source and Destination VRF Membership document:
http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_impl_tun.html
HQoS Support for Ethernet Over MPLS (EoMPLS) VCs on the SIP-400
For detailed information about this feature, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
HSRP MD5 Authentication
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/sr_hsmd.html
HTTPS—HTTP Server and Client with SSL 3.0
The HTTPS—HTTP Server and Client with SSL 3.0 feature provides Secure Socket Layer (SSL) version 3.0 support for the HTTP 1.1 server and HTTP 1.1 client within Cisco IOS software. SSL provides server authentication, encryption, and message integrity to allow secure HTTP communications. SSL also provides HTTP client authentication. HTTP over SSL is abbreviated as HTTPS.
H-VPLS with MPLS Edge on the SIP-400
For detailed information about this feature, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Ingress/Egress CoS Classification with Ingress Policing per VLAN or EoMPLS VC (L2 and L3 QoS)
For detailed information about this feature, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Inter-AS Support for Multicast VPN
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/iasmcvpn.html
Interface Management Improvements - Scalability and Reliability
The Interface Management Improvements - Scalability and Reliability feature provides enhancements to the IF-MIB:
- The scalability and reliability of the interface management are improved.
- The extensibility of the interface management infrastructure is ensured.
For more information about the IF-MIB, see the Cisco 7600 Series Router MIB Specifications Guide :
http://www.cisco.com/en/US/docs/routers/7600/technical_references/7600_mib_guides/MIB_Guide_ver_6/mibgde6.html
IPsec Anti-Replay Window: Expanding and Disabling
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt_iarwe.html
IPsec Dead Peer Detection (DPD) Periodic Message Option
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtdpmo.html
IPsec Preferred Peer
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt_ipspp.html
IPsec VTI - Virtual Tunnel Interface
For detailed information about this feature, see the IPsec Virtual Tunnel Interface document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gtIPSctm.html
IPv6 Anycast Address
For detailed information about these features, see the “Implementing IPv6 Addressing and Basic Connectivity” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
IPv6 Default Router Preferences
For detailed information about these features, see the “Implementing IPv6 Addressing and Basic Connectivity” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
Internet Protocol version 6 Multicast Features
Cisco IOS Release 12.2(33)SRA supports the following Internet Protocol version 6 (IPv6) multicast features:
- IPv6 Multicast: Bootstrap Router (BSR)
- IPv6 Multicast: Explicit Tracking of Receivers
- IPv6 Multicast: MLD Access Group
- IPv6 Multicast: PIM Accept Register
- IPv6 Multicast: PIM Embedded RP Support
- IPv6 Multicast: Routable Address Hello Option
- IPv6 Multicast: RPF Flooding of Bootstrap Router (BSR) Packets
- IPv6 Multicast: Static Multicast Routing (mroute) for IPv6
For detailed information about these features, see the “Implementing IPv6 Multicast” chapter in the Cisco IOS IPv6 Configuration Library :
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/es20-config-guide.html
IPMROUTE-STD-MIB
The IPMROUTE-STD-MIB, as defined in RFC 2932, is a module for managing IP multicast routing, independent of the specific multicast routing protocol in use. Support for this MIB replaces the draft form of the IPMROUTE-MIB.
The IPMROUTE-STD-MIB supports all the MIB objects of the IPMROUTE-MIB and also supports the following four new MIB objects:
- ipMRouteEntryCount
- ipMRouteHCOctets
- ipMRouteInterfaceHCInMcastOctets
- ipMRouteInterfaceHCOutMcastOctets
Note The ipMRouteScopeNameTable MIB object is not supported because it is not relevant to multicast routers.
IP SLAs - LSP Health Monitor
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a0080528450.html
IS-IS Support for Priority-Driven IP Prefix RIB Installation
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fslocrib.html
Layer 2 Virtual Private Network Interworking Features
Cisco IOS Release 12.2(33)SRA introduces support for the following Layer 2 Virtual Private Network (L2VPN) Interworking features:
- L2VPN Interworking: Ethernet VLAN to ATM AAL5
- L2VPN Interworking: Ethernet VLAN to Frame Relay
- L2VPN Interworking: Ethernet VLAN to PPP
For detailed information about these features, see the L2VPN Interworking document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_l2vpn_intrntwkg.html
Memory Leak Detector
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtmleakd.html
Memory Pool - SNMP Notification Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtmemnot.html
MPLS Embedded Management - High Capacity Counter
For detailed information about this feature, see the “Restrictions for MPLS Enhancements to Interfaces MIB” section in the MPLS Enhancements to Interfaces MIB document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/ftifemib.html
MPLS Enhancements to Interfaces MIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/ftifemib.html
MPLS Label Distribution MIB: MPLS LDP Trap Enhancement
For detailed information about this feature, see the following documents:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/ldpmib13.html
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fs27ldp8.html
MPLS LDP - Graceful Restart
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsgr29s.html
MPLS LDP - Session Protection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fssespro.html
MPLS over RBE
The ATM SPAs and Enhanced FlexWAN module support MLPS over Routed Bridge Encapsulation (RBE) on a Cisco 7600 series SIP-200. RBE is similar in functionality to RFC 1483 ATM half-bridging, except that ATM half-bridging is configured on a point-to-multipoint PVC, while RBE is configured on a point-to-point PVC.
For detailed information about this feature, see the following documents:
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/flexmpls.html
MPLS Static Labels
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_static_labels.html
MPLS VRF Aware Static Labels
For detailed information about this feature, see the VRF Aware MPLS Static Labels document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_static_labels.html
MPLS Traffic Engineering (TE) - AutoTunnel Mesh Groups
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gsamg2.html
MPLS Traffic Engineering (TE) - AutoTunnel Primary and Backup
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gsautotn.html
MPLS Traffic Engineering (TE) - Class-Based Tunnel Selection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gscbts.html
Also, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
MPLS Traffic Engineering (TE) - Fast Reroute MIB
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/frr_mib.html
MPLS Traffic Engineering (TE) - Fast Reroute Link and Node Protection
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gslnh29.html
MPLS Traffic Engineering (TE) - Inter-AS TE
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gsintast.html
MPLS Traffic Engineering (TE) - LSP Attributes
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fslspatt.html
MPLS Traffic Engineering (TE) - RSVP Hello State Timer
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gsrsvpht.html
MPLS Traffic Engineering (TE) - Shared Risk Link Groups (SRLG)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fs29srlg.html
MPLS Traffic Engineering (TE) - Verbatim Path Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsvbmlsp.html
MPLS VPN - eBGP Multipath support for CSC and InterAS MPLS VPNs
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbmulti.html
MPLS VPN - Explicit Null Label Support with BGP IPv4 Label Session
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gsxnlbsp.html
MPLS VPN - Loadbalancing Support for Inter-AS and CSC VPNs
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srmplc.html
MPLS VPN-MIB Support - MPLS VPN Trap Enhancement
For detailed information about this feature, see the “Command Reference” section in the MPLS VPN—MIB Support document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsvnmb25.html
MPLS VPN - Multi-Path Support for Inter-AS VPNs
For detailed information about this feature, see the MPLS VPN—Interautonomous System Support document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsiaseb.html
MPLS VPN - Route Target Rewrite
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fsrtrw4.html
MPLS VPN - VPN Aware LDP MIB
For detailed information about this feature, see the MPLS Label Distribution Protocol MIB Version 8 Upgrade document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fs27ldp8.html
MSDP Compliance with IETF RFC 3618
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gt_msdp.html
Multicast VPN MIB Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/mcvpnmib.html
Multilink Frame Relay (FRF.16.1) - Variable Bandwidth Class
For detailed information about this feature, see the following Multilink Frame Relay (FRF.16.1) document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fs_mfr.html
Multipoint Bridging on the SIP-400
For detailed information about this feature, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Multi-VC to VLAN Scalability
For information about this feature, see the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
http://www.cisco.com/en/US/partner/products/hw/routers/ps368/module_installation_and_configuration_guides_book09186a00802109bf.html
MUX UNI Support on the SIP-400 (MPB on GE)
For detailed information about this feature, see the “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
MUX UNI Support on LAN Cards
For detailed information about this feature, which is also referred to as the 7600-MUX-UNI Support on LAN Cards feature, see the “Configuring PFC3BXL and PFC3B Mode Multiprotocol Label Switching” chapter in the Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SR :
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/pfc3mpls.html
NETCONF over SSHv2
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srnetcon.html
NetFlow Layer 2 and Security Monitoring Exports
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/sronfsc.html
NetFlow MPLS Label Export
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sx_pal.html
NSF/SSO—MPLS LDP and LDP Graceful Restart
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fsldpgr.html
NSF/SSO—MPLS LDP MIB
For detailed information about this feature, see the “MIBs” section in the NSF/SSO—MPLS LDP and LDP Graceful Restart document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fsldpgr.html
NSF/SSO—MPLS TE and RSVP Graceful Restart
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_te_rsvp_grace.html
NSF/SSO—MPLS VPN
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fsvpngr.html
NSF/SSO—MPLS VPN MIB
For detailed information about this feature, see the “MIBs” section in the NSF/SSO—MPLS VPN document:
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fsvpngr.html
SSO HSRP
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srssohsr.html
Optional OCSP Nonce
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srpkinon.html
OSPF Area Transit Capability
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/ospfatc.html
OSPF Per-Interface Link-Local Signaling
For detailed information about this feature, which is also referred to as the OSPF Link-local Signaling (LLS) Per Interface Basis feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/ospflls.html
OSPF RFC 3623 Graceful Restart
For detailed information about this feature, which is also referred to as the NSF - OSPF RFC 3623 Graceful Restart feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gr_ospf.html
OSPF Sham-Link MIB Support
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/ospfslms.html
Periodic MIB Data Collection and Transfer Mechanism
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/gdatacol.html
Persistent Self-Signed Certificates
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srpkissc.html
PIM RPF Vector
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/pimrpfvr.html
Pseudowire Emulation Edge-to-Edge MIBs for Ethernet, Frame Relay, and ATM Services
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sbpweatm.html
QoS Support on Bridging Features
For detailed information about this feature, see the following documents:
- The “Configuring the SIPs and SSC” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
- “Configuring QoS on Bridged Interfaces” section in the Configuring QoS on the FlexWAN and Enhanced FlexWAN Modules document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/flexqos.html
Reliable Static Routing Back-Up Using Object Tracking
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html
Reverse Route Injection (RRI)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t14/feature/guide/gt_rrie.html
RFC 1490 Spanning-Tree Interoperability Enhancements
For detailed information about this feature, see the “Enhancements to RFC 1483 and RFC 1490 Spanning Tree Interoperability” section in the Cisco 7600 FlexWAN and Enhanced FlexWAN Modules Configuration Guide :
http://www.cisco.com/en/US/docs/routers/7600/install_config/flexwan_config/features.html
RSVP Message Authentication
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsrsvpnk.html
Scalable EoMPLS (SIP-Based)
For detailed information about this feature, see the “Configuring Fast Ethernet and Gigabit Ethernet SPAs” chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide :
https://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/7600series/SIP-SSC-SPA-HW-Install.html
Secure SNMP Views
The USM, VACM and Community MIBs have information that can potentially be used to gain access to the router using SNMP. Therefore, the USM, VACM, and Community MIBs are excluded from the default SNMP access view so as not to allow remote access unless specifically configured. However, when an SNMP view is created with any parent object identifier (OID) of these MIBs included (for example “internet included”), these MIBs also get included in the view. To increase security, the Secure SNMP Views enhancement excludes these MIBs from SNMP access views even when parent OIDs are included in the view. Prior to this release, when configuring SNMP views with parent OIDs that include the USM, VACM, or Community OIDs, the user was required to explicitly exclude them. For example, the following configuration can be used for excluding security-sensitive MIBs from the SNMP view named “test”:
! - include all MIBs under the parent tree "internet" snmp-server view test internet included
! -- exclude snmpUsmMIB snmp-server view test 1.3.6.1.6.3.15 excluded
! -- exclude snmpVacmMIB snmp-server view test 1.3.6.1.6.3.16 excluded
! -- exclude snmpCommunityMIB snmp-server view test 1.3.6.1.6.3.18 excluded
Beginning in Cisco IOS Releases 12.0(26)S and 12.2(2)T, the USM, VACM, and Community MIBs are excluded from any parent OIDs in a configured view by default. If you wish to include these MIBs in a view, you must now explicitly include them.
SNMP Support for VPNs
For detailed information about this feature, see the SNMP Notification Support for VPNs document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/cs23vpn.html
TCP MSS Adjustment
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t4/feature/guide/ft_admss.html
Two-Rate Policer
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/ft2plc26.html
VPLS Multiple VCs per Spoke
For detailed information about this feature, see the “Virtual Private LAN Services on the Optical Services Modules” section in the Configuring Multiprotocol Label Switching on the Optical Services Modules document:
http://www.cisco.com/en/US/docs/routers/7600/install_config/12.2SR_OSM_config/mpls.html
VRF Aware Multicast Error Messages
The VRF Aware Multicast Error Messages feature improves the troubleshooting of MPLS VPN environments by allowing service providers to track the multicast error messages that are associated with a particular MVPN customer.
VRF Aware System Message Logging (Syslog)
For detailed information about this feature, see the following document:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srvrfslg.html
MIBs
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:
http://tools.cisco.com/ITDIT/MIBS/servlet/index
If Cisco MIB Locator does not support the MIB information that you need, you can also obtain a list of supported MIBs and download MIBs from the Cisco MIBs page at the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
To access Cisco MIB Locator, you must have an account on Cisco.com. If you have forgotten or lost your account information, send a blank e-mail to cco-locksmith@cisco.com. An automatic check will verify that your e-mail address is registered with Cisco.com. If the check is successful, account details with a new random password will be e-mailed to you. Qualified users can establish an account on Cisco.com by following the directions found at this URL:
Limitations and Restrictions
The following sections contain information about limitations and restrictions in Cisco IOS Release 12.2SR that can apply to the Cisco 7600 series routers. With the release of Cisco IOS Release 12.2(33)SRC, Cisco IOS Release 12.2SR supports the Cisco 7200 series routers (Cisco 7200, Cisco 7200-NPE-G2, and Cisco 7201 routers) and the Cisco 7301 router.
- Limitations and Restrictions in Cisco IOS Release 12.2(33)SRE
- Limitations and Restrictions in Cisco IOS Release 12.2(33)SRC2
- Limitations and Restrictions in Cisco IOS Release 12.2(33)SRC
- Limitations and Restrictions in Cisco IOS Release 12.2(33)SRB
- Limitations and Restrictions in Cisco IOS Release 12.2(33)SRA
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRE
This section describes limitations and restrictions in Cisco IOS Release 12.2(33)SRE and later releases.
Enhanced Optical Services Modules Not Supported
Beginning with Cisco IOS Release 12.2(33)SRE, Enhanced Optical Service Modules are not supported by Cisco 7600 routers. The following modules are now unsupported:
- OSM Guidelines and Restrictions
- Gigabit Ethernet WAN
- OC-48 Packet over SONET
- OC-48 DPT/Packet over SONET
- OC-12 Packet over SONET
- OC-3 Packet over SONET
- OC-12 Channelized
- CT3/T1 Channelized/Unchannelized
- OC-12 ATM
For more information, see the following document:
http://www.cisco.com/en/US/products/hw/routers/ps368/prod_eol_notice0900aecd8073fdf9.html
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRC2
This section describes limitations and restrictions in Cisco IOS Release 12.2(33)SRC2 and later releases.
Cisco 7600 With Redundant Supervisor Cards Running 12.2(33)SRC2
You might experience an error condition with a Cisco 7600 chassis that has redundant supervisor cards running the 12.2(33)SRC2 IOS image and a NAM service blade. The error occurs when you perform a sequential boot of the two supervisor cards because the secondary (standby) supervisor does not go into proper standby mode.
You can find more information about this issue in Field Notice #63179.
- When you boot the two supervisor cards in parallel
- When you boot the standby supervisor card after the primary supervisor is up
- When the Cisco 7600 router runs the 12.2SRC1 image
- When only one supervisor card is installed in the Cisco 7600 chassis
When the primary supervisor functions as a standalone with the secondary supervisor card in RPR mode, the Cisco 7600 chassis functions normally (as if it has a standalone supervisor card). A switchover causes the system to be unavailable for up to three minutes because the secondary supervisor card is not in proper standby mode.
Note When both supervisors are booted simultaneously, the system will go to Hot Standby status. The primary supervisor will reboot when you issue the redun force-switchover command which causes the redundant supervisor to boot up to be the primary and the primary to be the redundant.
This problem requires you to downgrade the IOS image from 12.2SRC2 to 12.2SRC1. Account teams will help you do this if needed.
This problem will be fixed in 12.2SRC3, targeted for mid-January, 2009. When IOS image 12.2SRC3 is available, upgrade the image from 12.2SRC1 to 12.2SRC3 at your earliest opportunity.
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRC
This section describes limitations and restrictions in Cisco IOS Release 12.2(33)SRC and later releases.
Cisco 7200VXR Limitations on Support for Voice Features
Voice-related port adaptors and features are not supported on Cisco 7200VXR platforms in Cisco IOS Release 12.2(33)SRC and later releases. The following port adaptors are not supported on the Cisco 7200VXR:
Cisco 7600 Platform Restrictions for Broadband Support with Cisco IOS Release 12.2SRC
Physical Interface Restrictions
- The Broadband/ISG sessions are only supported on Gigabit (GE) Ethernet interfaces. See the Hardware Restriction section in the documentation for the specific type of GE interfaces that are required.
- The Broadband/ISG sessions are not supported on ATM interfaces.
- The Broadband/ISG sessions are only supported on Cisco 7600 series routers with RSP720 as the supervisor.
- The Broadband/ISG sessions are only supported on Cisco 7600 series routers with 7600-SIP-400 as the subscriber facing line card.
- The Broadband/ISG sessions are only supported on Cisco 7600 series routers with SPA-5X1GE-V2 or SPA-1X10GE-L2 as the subscriber facing port adaptor.
The Broadband/ISG sessions are not supported with following access protocols:
The Broadband/ISG sessions are only supported with access subinterfaces, which were introduced in Cisco IOS Release 12.2(33)SRB. For more information on this restriction, see the following document:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/sipspasw.html
- Traffic classes are not supported on Cisco 7600 series routers.
- Prepaid accounting is not supported on Cisco 7600 series routers.
- Per flow accounting using Traffic Classes is not supported on Cisco 7600 series routers.
- ISG Rate limiting via (QU,QD) is not supported on Cisco 7600 series routers.
- Layer 4 Redirect and PBHK are performed on the Centralized Route processor (RP) on Cisco 7600 series routers.
HA Support for DHCP Initiated IP Sessions When ISG Is a DHCP Relay Content
When ISG is configured as a DHCP relay, high availability for DHCP initiated IP sessions is supported only on “unnumbered” interfaces. On numbered interfaces, where the IP address is configured directly on the interface, HA is not supported.
HA Support for ISG Features Includes Change of Authorization but not Per-feature Push
ISG features can be dynamically changed through Change of Authorization (COA). The COA commands are supported for SSO/ISSU. But if a feature is changed, dynamically via per-feature push, HA support is not provided.
VLAN Mobility Is Not Allowed for ISG Sessions
For IP sessions initiated through DHCP, ISG does not allow the users to roam from one VLAN to the other. ISG expects the VLAN to remain the same throughout the user session.
If the user moves from one VLAN to the other, the user needs to reboot the Customer Premise Equipment (laptop or the modem) to initiate a new session.
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRB
This section describes limitations and restrictions in Cisco IOS Release 12.2(33)SRB and later releases.
IP Routing Protocols
Symptom: In rare cases a PE router running BGP may stop announcing BGP updates to subsets of its configured address families.
Conditions: A cisco7600 router running 12.2(33)SRB2 IOS in a L3VPN + L2 VPN converged topology may stop sending BGP updates during initial BGP convergence after enduring a period of interface flaps and linecard OIR.
Workaround: Un-configuring and re-configuring the corresponding neighbor configuration statement will clear the problem.
Multicast VPN
Symptoms: In rare cases, multicast traffic within VRF may not recover after a multicast RP router reload.
Conditions: In a mVPN environment, and on a Cisco7600 PE router running 12.2(33)SRB3 with PIM-SM running in the VRF and mvpn-bidir in the core and with auto-rp, if this PE router encountered a forced SSO switchover while the Multicast RP router is being reloaded, L3VPN multicast traffic on this PE may not recover.
Workaround: Issuing a “clear ip mroute vrf red” command on the PE router will restore the traffic flow.
Symptoms: After a SSO switchover on the PE encap router, mVPN multicast traffic may drop in a VRF
Conditions: In a mVPN environment, and on a Cisco 7600 PE router running 12.2(33)SRB3, and with mvpn-bidir in the core, sparse mode in the VRFs, and with auto-rp, if the encap PE router is reloaded and then followed by a forced SSO switchover, multicast traffic within the VRF may stop forwarding.
Workaround: Unconfiguring and reconfiguring MDT via the following commands will restore the traffic:
Quality of Service
Symptoms: All traffic on an ES-20 line card may get classified as class-default mistakenly .
Conditions: On a Cisco7600 router that is running Cisco IOS Release 12.2(33)SRB3, and with an egress policy-map configured on an ES20 to match multiple class-maps, a policy-map may match all traffic as class-default due to unknown triggers.
L2VPN
Symptoms: Traffic may stop flowing across ONE VC after system reload.
Conditions: This problem is seen on Cisco 7600 router that is running Cisco IOS Release 12.2SRB3 image with ES20 having around 100 EVCs configured with encap dot1q and Xconnect. The problem may be triggered after a router reload or the reset of the ES20 module. To verify if the problem condition is resent, from the ES20 console issue the command sh hw-module subslot slot-no tcam entry vlan port vlan-id1 vlan-id2 etype and if the Ingress policy field is marked as “Deny” as opposed to “Permit” then the condition is present.
Workaround: Reload the ES20 module using command hw-module module module_no reset .
Miscellaneous
Symptoms: Mac-address tables on different DFCs may get out of sync and cause flooding.
Conditions: This problem may occur on a Cisco 7600 that is running Cisco IOS Release 12.2SRB code with distributed forwarding and multi-vc per spoke VPLS configuration on an ES20, SIP400 or SIP600 with mac-sync enabled.
Workaround: Use software based Mac-sync along with Mac-aging timer adjustments using the following guidelines:
– Mac-oob-timer—160 (default value = 160s)
– Mac-aging-timer—3 x Mac-oob-timer (default value = 300s)
– Arp-timer—Less than Mac-aging-timer (recommended 300s, default value = 6 hours)
Symptoms: The clock source is active immediately after the addition of 'network-clocks' command corresponding to the source, though it is still in OOR actually.
Conditions: On a Cisco 7600 router running 12.2(33)SRB with Dual CEoP Spas, receiving a ref-clock with revertive mode. Once the primary is in OOR, the reference clock switches over to the secondary. If the primary clock source is reconfigured too quickly (removing and adding 'network-clocks select' command), that primary source is reverted back to the reference immediately without waiting for the stabilization.
MPLS
Symptoms: Scalable Ethernet over MPLS configuration on a Cisco 7600 does not work in some configurations. This problem is only for the Scalable EoMPLS case, in which xconnect is configured on SIP400 sub-interfaces, a feature which is documented in the following URL:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgeth.html#wp1172434
Conditions: This symptom is observed on a Cisco 7600 series router with sup720 and IOS 12.2(33)SRA5 and a SIP400 card configured with Scalable EoMPLS.
Workaround: Issue the command 'clear ip route ' when the problem is seen.
The problem is also not seen in the following EoMPLS configurations so changing to the following configurations will avoid the problem:
– software-based EoMPLS where xconnect is configured on an SVI interface
– hardware-based EoMPLS where xconnect is configured on a non-SVI interface and non-SIP400 subinterface.
L2VPN Pseudowire Redundancy
The following restrictions affect the L2VPN Pseudowire Redundancy feature on the Cisco 7600 series in Cisco IOS Release 12.2(33)SRB:
- IP (routed) Ethernet to VLAN Interworking is not supported.
- Data traffic may switch from the primary pseudowire to the backup pseudowire when the primary attachment circuit at the tail-end goes down. However, when the MPLS switching path for the primary pseudowire goes down, data traffic is not switched from the primary pseudowire to the backup pseudowire.
Limitations and Restrictions in Cisco IOS Release 12.2(33)SRA
This section describes limitations and restrictions in Cisco IOS Release 12.2(33)SRA and later releases.
ADM and AGM Modules
In Cisco IOS Release 12.2(33)SRA and later releases, traffic Anomaly Detection Module (ADM) and Anomaly Guard Module (AGM) modules are supported on the Supervisor Engine 720 but not on the Supervisor Engine 32.
Advanced QinQ Service Mapping
In Cisco IOS Release 12.2(33)SRA and later releases, Advanced QinQ Service Mapping is not supported on the OSM-2+4GE-WAN+ Optical Services Module (OSM).
Cisco IOS CEF
In Cisco IOS Release 12.2(33)SRA and later releases, the Cisco IOS CEF ip load-sharing per-packet , ip cef accounting per-prefix , and ip cef accounting non-recursive commands are not supported on the Cisco 7600 series routers.
Content Switching Modules
In Cisco IOS Release 12.2(33)SRA and later releases, the Content Switching Module (CSM) and Content Switching Module with SSL (CSM-S) are not supported.
IP Services Bundle Image
In the IP services bundle image of Cisco IOS Release 12.2(33)SRA and later releases, you cannot configure both MPLS and IPv6.
IPSec Not Supported by Cisco 7200
Cisco IOS Release 12.2SR does not support IPSec on Cisco 7200 platforms.
L2VPN Interworking
The Cisco 7600 series does not support IP (routed) Ethernet to VLAN Interworking. This restriction affects the L2VPN Interworking feature in Cisco IOS Release 12.2(33)SRA.
Maximum Number of IPsec Tunnels with PKI
In Cisco IOS Release 12.2(33)SRA and later releases, when Public Key Infrastructure (PKI) is configured with the IPsec VPN SPA, a maximum number of 2000 IP security (IPsec) tunnels is supported.
MPLS Aware Netflow
MPLS aware netflow is not supported on Cisco 7600 series routers due to hardware limitation of EARL7 and EARL7.5.
OSM-1CHOC12/T1-SI and QoS Packet Counts
On an OSM-1CHOC12/T1-SI, when Class-Based Weighted Fair Queueing (CBWFQ) or Low Latency Queueing (LLQ) is configured in combination with any feature that requires MSFC or PFC processing, the counters in the output of the show policy-map interface command do not increment. This situation occurs because the MSFC and PFC do not support CBWFQ or LLQ and do not count packets for QoS purposes.
Examples of configurations for which the counters do not increment are the following:
- frame-relay ip tcp header-compression
- frame-relay ip rtp header-compression
- access-list access-list-number permit ip any any log
Note that the log keyword in the access-list command causes packets to be processed by the MSFC or PFC.
Symptoms: On a Cisco 7600 series that is configured with a Supervisor Engine 720 and an OSM-1CHOC12/T1-SI, the output of the show policy-map interface command may display a packet counter of 0 for a serial interface.
This symptom is observed on a Cisco 7600 series that has a Class-Based Weighted Fair Queueing (CBWFQ) or Low Latency Queueing (LLQ) configuration when packets are process-switched in software on the MSFC or PFC instead of being fast-switched, and then the router is reloaded with one of the following saved configurations:
– When you have entered and saved commands such as the following to configure an access control list (ACL):
access-list 199 permit ip any any log
– When you have entered and saved commands such as the following to configure IP header compression:
frame-relay ip tcp header-compression
Workaround for the ACL symptom: Remove the log keyword from the access-list command, and then reload the router.
Workaround for the header compression symptom: Enter the no frame-relay ip tcp header-compression command or the no frame-relay ip rtp header-compression command, and then reload the router.
SNMP Version 1 BGP4-MIB Limitations
You may notice incorrect BGP trap OID output when you use the SNMP version 1 BGP4-MIB that is available for download at ftp://ftp.cisco.com/pub/mibs/v1/BGP4-MIB-V1SMI.my . When a router sends BGP traps (notifications) about state changes on an SNMP version 1 monitored BGP peer, the enterprise OID is incorrectly displayed as .1.3.6.1.2.1.15 (bgp) instead of .1.3.6.1.2.1.15.7 (bgpTraps). The problem is not due to any error with Cisco IOS software. This problem occurs because the BGP4-MIB does not follow RFC 1908 rules regarding version 1 and version 2 trap compliance. This MIB is controlled by IANA under the guidance of the IETF, and work is currently in progress by the IETF to replace this MIB with a new version that represents the current state of the BGP protocol. In the meantime, we recommend that you use the SNMP version 2 BGP4-MIB or the CISCO-BGP4-MIB to avoid an incorrect trap OID.
Important Notes
The following sections contain important notes about Cisco IOS Release 12.2SR that can apply to the Cisco 7600 series routers.
Cisco IOS Behavior Changes
Behavior changes describe the minor modifications to the way a device works that are sometimes introduced in a new software release. These changes typically occur during the course of resolving a software defect and are therefore not significant enough to warrant the creation of a stand-alone document. When behavior changes are introduced, existing documentation is updated with the changes described in this section.
- Cisco IOS Release 12.2(33)SRE8
- Cisco IOS Release 12.2(33)SRE7
- Cisco IOS Release 12.2(33)SRE6
- Cisco IOS Release 12.2(33)SRE5
- Cisco IOS Release 12.2(33)SRE4
- Cisco IOS Release 12.2(33)SRE3
- Cisco IOS Release 12.2(33)SRE2
- Cisco IOS Release 12.2(33)SRE1
- Cisco IOS Release 12.2(33)SRD6
- Cisco IOS Release 12.2(33)SRD5
- Cisco IOS Release 12.2(33)SRD4
- Cisco IOS Release 12.2(33)SRD3
Cisco IOS Release 12.2(33)SRE8
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRE8.
Old Behavior: If logging persistent auto was configured and a boot image loaded, part of the startup configuration may be erased.
New Behavior: Logging persistent auto will be removed from the config archive configuration.
Additional Information: http://www.cisco.com/en/US/docs/ios-xml/ios/config-mgmt/configuration/15-1sy/
config-mgmt-15-1sy-book.htmlNew Behavior: Alarm reporting can be enabled for Wanphy alarms.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/
es40_chap10.html#wp1468974Old Behavior: GLC-SX-MMD and GLC-LH-SMD SFPs were not supported in Cisco IOS Release 12.2(33)SRE releases.
New Behavior: GLC-SX-MMD and GLC-LH-SMD SFPs will be supported on 1GE ES+ line cards in Cisco IOS Release 12.2(33)SRE 8 and later releases.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/Hardware/15_0s/7600_hwd.html
Cisco IOS Release 12.2(33)SRE7
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRE7.
- The maximum value for cleanup-delay time that is configured using the mpls traffic-eng reoptimize timers delay cleanup-delay time command to delay the removal of old LSPs after tunnel reoptimization, is changed to 300 seconds.
Old Behavior: The maximum value for cleanup-delay time that is configured using the mpls traffic-eng reoptimize timers delay cleanup-delay time command, is 60 seconds.
New Behavior: The maximum value for cleanup-delay time that is configured using the mpls traffic-eng reoptimize timers delay cleanup-delay time command, is 300 seconds.
Additional Information: http://www.cisco.com/en/US/docs/ios-xml/ios/mpls/command/mp-m4.html#GUID-B64630A1-3CD7-42DE-8E86-6CD47AC8981A
Old Behavior: You cannot configure the NetFlow and microflow policy on an interface together.
New Behavior: You can configure per-interface NetFlow and QoS micropolicing on an interface. However, do not configure different flow mask types on an interface. Only a single flow mask type should be configured for the per-interface NetFlow and microflow policy.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/ios/15S/configuration/guide/nde.html#wp1131072
Old Behavior: The mp-recovery-enable keyword is not available for the hw-module slot command.
New Behavior: The mp-recovery-enable keyword is available.
Additional Information: http://www.cisco.com/en/US/docs/ios-xml/ios/interface/command/ir-f1.html#GUID-642623C0-B2E7-4C48-8163-534377F38142
Old Behavior: Taps on the same stream with different port range was rejected.
New Behavior: Taps on the same stream with different port range is accepted.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/lawful_intercept/76LIch2.html
- The snmp-server enable traps atm snmp-walk-serial command, which is used to include missing ATM VC SNMP MIB objects of cAal5VccEntry type, is introduced.
Old Behavior: Some ATM VC SNMP MlB objects of cAal5VccEntry type are not displayed when you use the snmpwalk application.
New Behavior: The missing ATM VC SNMP MIB objects are displayed.
Additional Information: http://www.cisco.com/en/US/docs/ios-xml/ios/snmp/command/nm-snmp-cr-book.html
Old Behavior: The switchport commands could be configured on Layer 2 EtherChannel ports, which frequently caused mismatched attributes between the member ports and with LACP, the formation of a secondary aggregator.
New Behavior: The switchport commands cannot be configured on Layer 2 EtherChannel ports. The switchport commands can be configured only on the Layer 2 port-channel interface.
Additional Information: This message is displayed if you attempt to configure the switchport command on an EtherChannel member port:
Configuration is not allowed on Port members. Remove the interface from the Port Channel to modify its config.
Cisco IOS Release 12.2(33)SRE6
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRE6.
- Status of the snmp trap link-status command on the ATM subinterface changes when the device is reloaded.
Old Behavior: The snmp-server enable traps atm subif command enables Simple Network Management Protocol (SNMP) link trap generation on all the ATM subinterfaces. When the device is reloaded SNMP trap generation is enabled on all ATM subinterfaces.
New Behavior: To enable SNMP link trap generation on an ATM subinterface, first configure the snmp-server enable traps atm subif command in global configuration mode and then configure the snmp trap link-status command on the ATM subinterface on which SNMP link trap generation is to be enabled.
Additional Information: http://www.cisco.com/en/US/docs/ios-xml/ios/snmp/command/nm-snmp-cr-s4.html
- Optimization of ACL TCAM entry consumption on the 7600 platforms for Policy Based Routing under certain circumstances.
Old Behavior: When configuring multiple PBR sequences (or a single PBR sequence with multiple ACLs) in which more than one PBR ACL contains DENY entries, the result of the merge is sub-optimal in terms of number of TCAM entries and masks used.
New Behavior: Entering the new platform ipv4 pbr optimize tcam command allows for better optimization in the case described.
http://www.cisco.com/en/US/docs/routers/7600/ios/15S/configuration/guide/layer3.html#wp1027016
Cisco IOS Release 12.2(33)SRE5
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRE5.
Old Behavior: When the neighbor prefix-length-size command is configured in the L2VPN VPLS address family, if that neighbor has a peer policy or route map that is removed, the neighbor prefix-length-size command setting is also removed.
New Behavior: When the neighbor prefix-length-size command is configured in the L2VPN VPLS address family, the value of that command overrides the value set for the peer-group. If the command is locally configured for the peer, it will not be inherited from the peer-group.
Old Behavior: Prior to the Cisco IOS SRE4 release, the SPA-1xCHOC12/DS0 SPA boots up with the old controller status. If it is not admin down, it starts with no admin down and interfaces comes up as soon as the SPA boots up.
New Behavior: Effective from Cisco IOS Release 15.1(3)S and Cisco IOS Release 12.2(33)SRE05, the SPA-1xCHOC12/DS0 boots up with admin down status and the original SPA status is restored after one second of the SPA bootup. Wait for a second after the log message “SPA_OIR-6-ONLINECARD: SPA (SPA-1XCHOC12/DS0) online in subslot” is displayed, to configure the SPA.
Additional Information: http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76ovwser.html#wp1058053
Old Behavior: IPv6 IP addresses were blocked when configured under a subinterface.
New Behavior: IPv6 IP addresses are supported when configured under a subinterface using the xconnect command.
Additional Information: http://www.cisco.com/en/US/docs/ios/mpls/command/reference/mp_t1.html#wp1051476
Cisco IOS Release 12.2(33)SRE4
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRE4.
Old Behavior: By default, both IPv6 and IPv4 capability is exchanged with a BGP peer that has an IPv6 address. When an IPv6 peer is configured, that neighbor is automatically activated under the IPv4 unicast address family.
New Behavior: Starting with new peers being configured, an IPv6 neighbor is no longer automatically activated under the IPv4 address family. You can manually activate the IPv6 neighbor under the IPv4 address family if you want. If you do not want an existing IPv6 peer activated under the IPv4 address family, you can manually deactivate the peer with the no neighbor ipv6-address activate command. Until then, existing configurations that activate an IPv6 neighbor under the IPv4 unicast address family will continue to try to establish a session.
Additional Information: http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_basic_net_ps11280_TSD_Products_Configuration_Guide_Chapter.html#wp1137536
http://www.cisco.com/en/US/partner/docs/ios/ios_xe/iproute_bgp/configuration/guide/irg_basic_net_xe_ps11174_TSD_Products_Configuration_Guide_Chapter.html
Old Behavior: Destination-only traffic classes cannot be controlled when more than one protocol is operating at the border routers.
New Behavior: Destination-only traffic classes can be controlled when more than one protocol is operating at the border routers using dynamic PBR.
Additional Information: http://www.cisco.com/en/US/docs/ios-xml/ios/pfr/command/pfr-cr-book.html
Old Behavior: Only two members can be added to the port-channel access type subinterface.
New Behavior: Multiple members can be added to the port-channel access type subinterface if the ISG is not configured.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap4.html#wp1554373
Old Behavior: The behavior on the L2 interfaces is trust cos by default.
New Behavior: For switchport and SVI instances, the default port behavior is trust dscp. The CoS value is now derived from the dscp value.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.html#wp1346147
Cisco IOS Release 12.2(33)SRE3
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRE3.
- SNMP agent returns new error values if the NMS sending the query has a correct SNMP community but does not have a read or a write view.
Old Behavior: In the case of the NMS sending the query, the SNMP agent checks whether the community string is valid. If the community string is valid, then it ensures whether the community has access to a read or write view. This causes a very high CPU load.
New Behavior: In the case of the NMS sending the query having a correct SNMP community but that does not have a read or a write view, the SNMP agent returns the following error values:
– For a get or a getnext query, returns GEN_ERROR for SNMPv1 and AUTHORIZATION_ERROR for SNMPv2C.
– For a set query, returns NO_ACCESS_ERROR.
http://www.cisco.com/en/US/docs/ios/csa/command/reference/csa_03.html
http://www.cisco.com/en/US/docs/ios/ha/command/reference/ha_s3.html
http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_16.html
http://www.cisco.com/en/US/docs/ios/ipswitch/command/reference/isw_s3.html
http://www.cisco.com/en/US/docs/ios/mpls/command/reference/mp_s3.html
http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_20.html
- Source IP address sent in prune echo messages is now set to the source IP address of the prune echoer.
Old Behavior: The source IP address of prune echo messages is not set to the source IP address of the router that is echoing the prune message (prune echoer). This behavior is not in accordance with RFC 4601 and could potentially cause interoperability issues in certain IPTV deployment scenarios, for example, in VPLS deployments with a mix of Cisco and third-party routers.
New Behavior: The source IP address that is sent in prune echo messages is now set to the source IP address of the prune echoer.
Old Behavior: The following commands display flap-statistics, dampened-paths, and dampening parameters of VRFs under the VPNv4 or VPNv6 address family identifier:
– show ip bgp vpnv4 all dampening
– show ip bgp vpnv6 unicast all dampening
New Behavior: Because VRFs can have dampening enabled independently of other VRFs and the global VPNv4 and VPNv6 topologies, the following commands display flap-statistics, dampened-paths, and dampening parameters of individual VRFs under that VRF name:
– show ip bgp vpnv4 all dampening
– show ip bgp vpnv6 unicast all dampening
If dampening is not enabled for a VRF, that is stated under the VRF name.
For more information, see the Cisco IOS IP Routing: BGP Command Reference .
Old behavior: A crash occurs when removing an IPv6 access list that is still applied to a vty.
New behavior: The phrase "Identical restrictions should be set on all the virtual terminal lines because a user can connect to any of them" has been added so users can avoid this problem.
Additional Information: http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_05.html
Old Behavior: After a reload of a router, some or all of the BGP address families do not come up. This is because the router is receiving messages from a neighbor that the AFI or SAFI is not supported, and the router does not retry those AFIs. The output of show ip bgp all summary shows the address family in NoNeg or idle state, and it will never leave that state. Typical output looks like:
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
x.x.x.x 4 1 0 0 1 0 0 never (NoNeg)New Behavior: When the router receives a message that the AFI or SAFI is not supported, the router does not simply drop the rejected AFIs or SAFIs from subsequent OPEN messages. Instead, the router retries the AFI/SAFI within the existing OPEN message retry timing sequence, but with an exponential backoff (stopping at 10 minutes) applied to decisions about whether to include a particular AFI/SAFI in an OPEN message. The timing of OPEN messages is not changed. Successful negotiation of the AFI results in a reset of the backoff sequence for future attempts. Also, when a BGP connection collision occurs with a session in the ESTABLISHED state, BGP sends a CEASE notification on the newly opened connection, and a keepalive message on the old connection. The new connection is closed. If the old session was stale, the keepalive causes it to be closed. The neighbor will retry its OPEN message after receiving the CEASE message and waiting a few seconds.
Old Behavior: The output of the debug ip mfib mrib and the debug ipv6 mfib mrib commands would display EOF messages for a particular multicast group.
New Behavior: EOF messages are no longer displayed in the output of the debug ip mfib mrib and debug ipv6 mfib mrib commands. The detail keyword was added to the debug ip mfib mrib and debug ipv6 mfib mrib commands to display detailed debugging output (including EOF messages). The removal of EOF messages from the display of the debug ip mfib mrib and debug ipv6 mfib mrib commands eases troubleshooting of the MFIB communication with the MRIB.
Old Behavior: ISG reverses the inbound and outbound data values in the ssg-control-info attribute.
New Behavior: The subscriber accounting ssg command allows ISG to use the same format as SSG for the ssg-control-info attribute.
Additional Information: http://www.cisco.com/en/US/docs/ios/isg/command/reference/isg_m1.html
Old Behavior: The total number of active NetFlow flows in a module obtained from an SNMP query is always instantaneous value.
New Behavior: A new keyword, cache , is added to the mls netflow command. When the mls netflow cache command is executed, the command returns a cached value of the total active flow count. The cached value is updated every 30 seconds.
http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_02.html#wp1136217
Old Behavior: The MTU and TTL rate limiters were not enabled by default.
New Behavior: The MTU and TTL rate limiters are enabled by default. The default values are 970 and 97 respectively.
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/dos.html#wp1163490
Old Behavior: In scaled scenario, SIP200_MP-4-PAUSE messages takes on a lot of logging space and in the process other important logs might get missed.
New Behavior: SIP200_MP-4-PAUSE message to avoid console flooding. Rate limit SIP200_MP-4-PAUSE ensures that one pause message is logged per unique occurrence across the SIP200 reloads and the subsequent occurrences are only statistically accounted.
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76tblsip.html.
Old Behavior: A fix is required to reduce the NP reload time
New Behavior: Network Processor crashinfo is disabled for all Network Processor exceptions by default.
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76ovwsip.html
Cisco IOS Release 12.2(33)SRE2
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRE2.
Old Behavior: The error throttling command can be enabled only on T1 controllers.
New Behavior: The error throttling command can be enabled on E1 controllers of a channelized E3 port adapter also.
Additional Information: http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_d1.html#wp1015132
Old Behavior: DHCP server does not send infinite lease time to the clients for which manual bindings are configured.
New Behavior: DHCP server sends infinite lease time to the clients for which manual bindings are configured.
Additional Information: http://www.cisco.com/en/US/docs/ios/ipaddr/configuration/guide/iad_dhcp_svr_cfg_ps10592_TSD_Products_Configuration_Guide_Chapter.html#wp1155880
New Behavior: The optional force keyword was added to the vrf upgrade-cli command. Using this keyword disables the confirmation prompt when performing the upgrade process.
Old Behavior: When the neighbor as-override command is specified to configure that a PE router overrides the autonomous system number (ASN) of a site with the ASN of a provider, it is standard practice to also configure Site of Origin (SoO). SoO, configured on a PE along with neighbor as-override, helps to identify the site of origin for the prefix so that the prefix is not sent back to the source CE from a PE.
New Behavior: An alternative to the SoO feature is using the bgp update-group split as-override command. The bgp update-group split as-override command causes the peers configured with the neighbor as-override command under the same address-family IPv4 VRF, which were previously under one update group, to be removed from that update group and each placed in their own update group.
Additional Information: http://www.cisco.com/en/US/docs/ios/iproute_bgp/command/reference/irg_bgp1.htm
Old Behavior: BGP selects paths which are not the oldest paths for multipaths. This causes BGP to unnecessarily flap from multipaths to non-multipath as a result of route flaps
New Behavior: BGP uses the best-path selection algorithm to find a set of equally good routes. These routes are the potential multipaths. In Cisco IOS Release 12.2(33)SRD and later releases, when there are more equally good multipaths available than the maximum permitted number, then the oldest paths are selected as multipaths.
Additional Information: http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_external_sp.html
http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_overview.html
Old Behavior: When a connected route is automatically summarized by the auto-summary (BGP) command, the route is not deleted from the BGP routing table if the interface assigned that address is shut down.
New Behavior: When a connected route is automatically summarized by the auto-summary (BGP) command, the route is properly deleted from the BGP routing table if the interface assigned that address is shut down.
For more information, see the auto-summary (BGP) command: http://www.cisco.com/en/US/docs/ios/iproute_bgp/command/reference/irg_bgp1.html
Old Behavior: Command accounting and command authorization that include a 4-byte ASN number are sent in the same format that is used on the command line interface.
New Behavior: Command accounting and command authorization that include a 4-byte ASN number are sent in the asplain notation irrespective of the format that is used on the command line interface.
Additional information: http://www.cisco.com/en/US/docs/ios/iproute_bgp/command/reference/irg_bgp3.html
http://www.cisco.com/en/US/docs/ios/iproute_bgp/command/reference/irg_bgp4.html
http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_10.html
http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_11.html
Old Behavior: On routed interfaces, when mls qos is enabled, ES+ mark the packet as “trust dscp” even when ingress marking of CoS is configured (“set cos 0-7 ”) in the policy map. Because of this, CoS value always propagated from dscp/prec (by EARL).
New Behavior: With the new behavior, for routed interfaces, ES+ mark the packet as “trust cos” when ingress marking of COS is configured. As the result of this, cos value configured using “set cos” will be preserved in the outgoing packet and will not be rewritten by EARL.
Impact to customer: The ES+ line card marks a packet as trust cos when ingress marking for CoS is configured for a routed interface. Hence, the CoS value configured using the set cos value command is retained on the outgoing packet. This cos value is not overwritten by EARL or derived from dscp.
Additional information: http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.html#wp1346147
Old Behavior: MIB uses the same diag code as BFD internal. However, the MIB definition has values starting at offset 1, while BFD internal (and ietf spec) starts at offset 0. This means all diag codes for down are off by 1.
New Behavior: BFD MIB: bfdSessDiag value for session down traps corrected and updated in the document.
Additional Information: https://www.cisco.com/en/US/docs/ios/iproute_bfd/configuration/guide/irb_bfd_mib.html
Old Behavior: The maximum MTU size that can be configured on POS interfaces is 117994.
New Behavior: The maximum MTU size that can be configured on POS interfaces is 9216.
Additional Information: http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/pa-pos-1oc3_install_config/6514conf.html#wp1041110
http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/multichannel_serial/pa-pos-2oc3_install_config/3028conf.html#wp1028535
Old Behavior: No note was present in the guide saying that the system will not retain the configuration of the old interface.
New Behavior: Added a note in the SIP/SPA Configuration Guide saying “If you move the SPA (SPA-8XTE1/SPA-4xCT3/DS0/SPA-2xCT3/DS0/SPA-1xCHSTM1/OC3) from one LC to another type of LC in the same bay and same slot, the system will not retain the configuration of the old interface”.
Additional information: http://preview.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76tblsip.html#wp1105809
New Behavior: The shape rate cannot be configured greater than 131Mb at the leaf level on ES+ interfaces.
Information is updated in the Restrictions and Guidelines section, under the topic “Configuring Shaping”, in the Chapter Configuring QoS.
Additional information: http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.html#wp1352263
- VC QoS on VP-PW support extended to CEoP SPA from Cisco IOS Release 12.2(33)SRE2 and Cisco IOS Release 15.0(1)S onwards.
Old Behavior: VC QoS on VP-PW was supported on ATM SPA.
New Behavior: VC QoS on VP-PW support is extended to CEoP SPA.
Additional Information: http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgatm.html
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgsip.html#wp1162382>
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76ovwsip.html#wp1053930>
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76ovwcep.html
Cisco IOS Release 12.2(33)SRE1
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRE1.
- The syslog error message for multicast Call Admission Control (CAC) limits now shows information about both limits and interfaces.
Old Behavior: When the multicast CAC limit is configured at both the main and subinterface, the syslog error message shown when the multicast CAC limit was reached did not mention the exact interface limit that denied the OLE addition.
New Behavior: The syslog error message is updated with the information about the limit and the interface on which it was denied. See the following example:
*Feb 19 10:36:11.514 PST: %IPMCAST_LIB-4-IPMCAST_LIMIT: Adding Outgoing interface 'Ethernet0/0.2' denied for (*,FF03::1:1:6) due to limit (4) in Ethernet0/0
-Process= "PIM IPv6", ipl= 0, pid= 143.http://www.cisco.com/en/US/docs/ios/12_2sb/system/messages/sys_msg_book.html
Old Behavior: The dialer pool-member command was available on Cisco IOS Release 12.2(33)SRB and later releases.
New Behavior: The dialer pool-member command is not supported on Cisco IOS 12.2SR releases.
http://www.cisco.com/en/US/docs/ios/dial/command/reference/dia_d1.html#wp1033489
New Behavior: Use the BRE+APS feature to configure two VCs for the same VLAN, provided their parent interfaces too belong to the same Automatic Protection Switching (APS) group.
Old Behavior: BRE does not work on APS protected ATM interfaces. You should configure “bre-connect” on both ATM interfaces with the same vlan. Currently, software allows only one bre-connect per vlan. This restriction needs to be removed for making BRE work with APS.
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/vlans.html and http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/vlans.html
Updated section: Bridged routed Encapsulation with Automatic Protection Switching
Commands, keywords, and arguments that have been changed:
- Software configuration updates as part of the Private Host SVI feature for Cisco IOS Release 12.2(33) SRD3. This feature will be shared as part of a hidden doc for select customers.
Old Behavior: Unicast and broadcast traffic from Private host isolated ports were not sent over VPLS enabled interfaces.
New Behavior: Unicast and broadcast traffic from Private host isolated ports are sent over VPLS enabled interfaces.
Private Host feature can be enabled with VPLS enabled interfaces acting as Private host promiscuous ports.
New commands and key words included:
private-hosts mac-list mac-list-name mac address
private-hosts vlan-list vlan-id
private-hosts promiscuous mac-list-name [ vlan-list vlan-id ]
Old Behavior: 8 DWDM SFPs DWDM-SFP-3346, DWDM-SFP-3739, DWDM-SFP-4134, DWDM-SFP-4532, DWDM-SFP-4931, DWDM-SFP-5332, DWDM-SFP-5736, DWDM-SFP-6141 were not supported on ES20/SIP-400/SIP-600.
New Behavior: Support the additional 8 DWDM SFPs on ES20/SIP-400/SIP-600.
http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html
New Behavior: Current operational state of the peer port is not “error disabled”and is in “Advertisment” state.
Old Behavior: When you configure SPAN and UDLD combinations on a port where the interface is a SPAN destination port, the current operational state of the peer is disabled as the peer disables the port.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/ude_udlr.html#wp1041358
Updated section: UDE Configuration Guidelines
No commands, keywords, and arguments that have been changed.
Changes to default behavior if appropriate: Peer port is no longer in error disabled state but is in Advertisement state.
Old Behavior: There is no limit on the number of L4 redirects.
New Behavior: Maximum number of L4 redirects can be configured with redirect session-limit command.
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_l4_redirect.html and http://www.cisco.com/en/US/docs/ios/isg/command/reference/isg_m1.html
New Behavior: A new CLI enables or disables the trust state over the internal recirculate path. The CLI is described as: “[no] mls qos recirc untrust [slot ]”.
For complete syntax and usage information for the command mls qos recirc untrust , see the Cisco QoS command reference at this URL:
http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_book.html
Old Behavior: The bit “CR_UNTRUST” on DE_NOT_DE_MISC_CNTRL is currently enabled by default on the Earl, when it boots up in PFC3C mode and currently does not have any CLI to control or modify its state.
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/swcg.html and http://www.cisco.com/en/US/docs/routers/7600/Hardware/Hardware_Guides/Supervisor_Engine_and_Route_Switch_Processor_Guide/76-sup-rsp.html
Updated section: QoS on the RSP720-10GE
Commands, keywords, and arguments have been changed. A new command mls qos recirc untrust is introduced
Old Behavior: Policy map with cos based wred is rejected on main interface of ES+ line card.
New Behavior: Policy map with cos based wred is accepted on the main interface of ES+ line card.
All the dot1q traffic passing through this main interface is subjected to this wred based on their respective cos markings.
Impact to customer: For EVC, subinterfaces, and Layer 3 main interface the WRED support is now dscp-based, precedence-based, and cos-based.
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.html#wp1437667
Old Behavior: ISG replies to ARP requests for destinations on the same interface.
New Behavior: ISG does not reply to ARP requests for destinations on the same interface if the arp ignore local command is configured.
http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html and http://www.cisco.com/en/US/docs/ios/isg/command/reference/isg_a1.html
Old Behavior: The bfd-ctrl , bfd-echo , glbp , and vrrp keywords are not available with the mls qos protocol command.
New Behavior: These four keywords are now available with this command.
http://www.cisco.com/en/US/docs/ios/qos/command/reference/qos_m2.html
Old Behavior: Cisco IOS software releases process NTP mode 7 packets.
New Behavior: Cisco IOS software releases where CSCtd75033 is resolved do not process
NTP mode 7 packets, and instead, if debugs for NTP are enabled, display “NTP: Receive: dropping message: Received NTP private mode packet. 7”.
To have Cisco IOS Software process NTP mode 7 packets, enter the ntp allow mode private command (disabled by default).
Cisco IOS Release 12.2(33)SRD6
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRD6.
Old Behavior: In scaled scenario, SIP200_MP-4-PAUSE messages takes on a lot of logging space, and in the process other important logs might get missed.
New Behavior: SIP200_MP-4-PAUSE message is added to avoid console flooding.
Impact to customer: Rate limit SIP200_MP-4-PAUSE ensures that one pause message is logged per unique occurrence across the SIP200 reloads, and the subsequent occurrences are only statistically accounted.
Additional Information: http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/
7600series/76tblsip.htmlCisco IOS Release 12.2(33)SRD5
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRD5.
Old Behavior: The error throttling command can be enabled only on T1 controllers.
New Behavior: The error throttling command can be enabled on E1 controllers of a channelized E3 port adapter also.
Additional Information: http://www.cisco.com/en/US/docs/ios/interface/command/reference/ir_d1.html#wp1015132
- Source IP address sent in prune echo messages is now set to the source IP address of the prune echoer.
Old Behavior: The source IP address of prune echo messages is not set to the source IP address of the router that is echoing the prune message (prune echoer). This behavior is not in accordance with RFC 4601 and could potentially cause interoperability issues in certain IPTV deployment scenarios, for example, in VPLS deployments with a mix of Cisco and third-party routers.
New Behavior: The source IP address that is sent in prune echo messages is now set to the source IP address of the prune echoer.
Old Behavior: BGP selects paths which are not the oldest paths for multipaths. This causes BGP to unnecessarily flap from multipaths to non-multipath as a result of route flaps
New Behavior: BGP uses the best-path selection algorithm to find a set of equally good routes. These routes are the potential multipaths. In Cisco IOS Release 12.2(33)SRD and later releases, when there are more equally good multipaths available than the maximum permitted number, then the oldest paths are selected as multipaths.
Additional Information: http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_external_sp.html
http://www.cisco.com/en/US/docs/ios/iproute_bgp/configuration/guide/irg_overview.html
Old Behavior: On routed interfaces, when mls qos enabled, ES+ mark the packet as “trust dscp” even when ingress marking of COS is configured (set con 0-7 ) in the policy map. Because of this, CoS value always propagated from dscp/prec.
New Behavior: With the new behavior, for routed interfaces, ES+ mark the packet as “trust cos” when ingress marking of CoS is configured. As the result of this, CoS value configured using “set cos” will be preserved in the outgoing packet and will not be rewritten.
Impact to customer: The ES+ line card marks a packet as trust cos when ingress marking for CoS is configured for a routed interface. Hence, the CoS value configured using the set cos value command is retained on the outgoing packet. This CoS value is not overwritten or derived from DSCP.
Additional information: http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.
html#wp1346147
- Old Behavior: No note was present in the guide saying that the system will not retain the configuration of the old interface.
New Behavior: If you move the SPA (SPA-8XTE1/ SPA-4xCT3/DS0 / SPA-2xCT3/DS0/SPA-1xCHSTM1/OC3) from one LC to another type of LC in the same bay and same slot, the system will not retain the configuration of the old interface.
Additional information: http://preview.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/
configuration/7600series/76tblsip.html#wp1105809New Behavior: The shape rate cannot be configured greater than 131Mb at the leaf level on ES+ interfaces.
Additional information: http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/
es40_chap7.html#wp1352263Old Behavior: The maximum MTU size that can be configured on POS interfaces is 117994.
New Behavior: The maximum MTU size that can be configured on POS interfaces is 9216.
Additional Information: http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/
multichannel_serial/pa-pos-1oc3_install_config/6514conf.html#wp1041110http://www.cisco.com/en/US/docs/interfaces_modules/port_adapters/install_upgrade/
multichannel_serial/pa-pos-2oc3_install_config/3028conf.html#wp1028535Cisco IOS Release 12.2(33)SRD4
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRD4.
New Behavior: Added the domain command under - aaa dynamic author context which configures username domain options for the RADIUS application.
The latest command is available at:
http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_d2.html
Old Behavior: More specific routes are advertised and withdrawn later, even if aggregate-address summary-only is configured. The BGP table shows the specific prefixes as suppressed.
New Behavior: The bgp aggregate-timer command now accepts the value of 0 (zero), which disables the aggregate timer and suppresses the routes immediately.
Old Behavior: When the neighbor as-override command is specified to configure that a PE router overrides the autonomous system number (ASN) of a site with the ASN of a provider, it is standard practice to also configure Site of Origin (SoO). SoO, configured on a PE along with neighbor as-override, helps to identify the site of origin for the prefix so that the prefix is not sent back to the source CE from a PE.
New Behavior: An alternative to the SoO feature is using the bgp update-group split as- override command. The bgp update-group split as-override command causes the peers configured with the neighbor as-override command under the same address-family IPv4 VRF, which were previously under one update group, to be removed from that update group and each placed in their own update group.
Additional Information: http://www.cisco.com/en/US/docs/ios/iproute_bgp/command/reference/irg_bgp1.html
- Old Behavior: BRE does not work on APS protected ATM interfaces. You should configure “bre-connect” on both ATM interfaces with the same vlan. Currently, software allows only one bre-connect per vlan. This restriction needs to be removed for making BRE work with APS.
New Behavior: Use the BRE+APS feature to configure two VCs for the same VLAN, provided their parent interfaces too belong to the same Automatic Protection Switching (APS) group.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/vlans.html
- In the earlier design (up to SRD3) subinterfaces numbered 1-300, support high bandwidth (> OC3) operation with QoS configured. Even if only say single subinterface is configured but with subinterface number > 300, then there is a chance that packets may be dropped if traffic rate exceeds OC3 and QoS is configured under the subinterface, due to QoS lock failures. The probability of packet drops, due to QoS lock failures is higher if the pps rate for the subinterface is high (pps cutoff not available) This happens because only subinterface numbered 1-300 are allocated QoS statistics in SRAM, any other subinterface is allocated QoS statistics in DRAM which is considerably slower.
With this DDTS, there is no limitation w.r.t subinterface number used. But, there is still a limit on the total number of subinterfaces (300) per physical port which can have QoS statistics in SRAM. So, with this change, if only g2/0/0.700 to g2/0/0.999 subinterfaces are configured under g2/0/0, then all the subinterfaces will have QoS statistics in SRAM, and there is no bandwidth limitation for these subinterfaces.
Look for following in line card output for interfaces with QoS configuration, below output will indicate if subinterface QoS statistics are maintained in SRAM or DRAM:
SIP-400-2#sh platform np qos class tables all | include SRAM
SIP-400-2#sh platform np qos class tables all | include DRAM
Old Behavior: Limits are not enforced on the number of subscriber sessions.
New Behavior: Number of subscriber sessions is restricted per ES+ line card, SIP400 line card, and per chassis.
Additional Information: http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_acess_sub_sessns.html#wp1054501 and http://www.cisco.com/en/US/docs/ios/isg/command/reference/isg_m1.html .
- Old Behavior: When you configure SPAN and UDLD combinations on a port where the interface is a SPAN destination port, the current operational state of the peer is disabled as the peer disables the port.
New Behavior: Current operational state of the peer port is not “error disabled” and is in “Advertisement” state.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/ude_udlr.html#wp1041358
New Behavior: Maximum number of L4 redirects can be configured with redirect session-limit command.
Additional Information: http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_l4_redirect.html and http://www.cisco.com/en/US/docs/ios/isg/command/reference/isg_m1.html
New Behavior: Policy map with cos based wred is accepted on the main interface of ES+ line card.
All the dot1q traffic passing through this main interface is subjected to this wred based on their respective cos markings.
Impact to customer: For EVC, subinterfaces, and Layer 3 main interface the WRED support is now dscp-based, precedence-based, and cos-based.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/install_config/ES40_config_guide/es40_chap7.html#wp1437667
Cisco IOS Release 12.2(33)SRD3
The following behavior changes are introduced in Cisco IOS Release 12.2(33)SRD3.
Old Behavior: No cache was maintained for CISCO-FLASH-MIB
New Behavior: A new command snmp mib flash cache has been added to start a process that constructs and maintains a cache.
Additional Information: http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_17.html#wp1109596
- Change for networks using redistribution from BGP into OSPF in VRF tables, either in MPLS VPN or VRF-lite environments, where redistribution happens on more than one router and the metric of the redistributed route is being used to choose the preferred exit point.
Old Behavior: If BGP is redistributed into OSPF and no route-map or default redistribution metric is specified, the OSPF route is assigned either a metric of 1 if redistribution happens in the global routing table or the metric of the BGP route if redistribution happens in a VRF.
New Behavior: A redistributed OSPF route inherits the BGP metric only if the OSPF route was received via MPLS VPN and contains extended attributes propagating the OSPF metric. In all other cases, the OSPF route receives a metric of 1, including the case of MPLS-VPN routes not carrying an OSPF metric in extended attributes.
Additional Information: http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_cfg_layer3_vpn_ps6922_TSD_Products_Configuration_Guide_Chapter.html
Old Behavior: Packets dropped by the IP access control lists (ACLs), filters, ISG policing, and prepaid volume features were counted.
New Behavior: Starting with Cisco IOS Release 12.2(33)SRD3, ISG accounting does not count, and subscribers are not billed for, packets dropped by these features.
Additional information: http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/cfg_isg_acctng.html
Old Behavior: Call-home is not VPN Routing/Forwarding (VRF) aware for email messages.
New Behavior: A new CLI command is introduced to enable the VRF support for call-home. Call-home can use the configured interface to send an email message.
Call-home can use the VRF infrastructure to route email messages. If a VRF is not specified in call-home configuration, call-home will use the global routing table to send email messages. If a VRF is specified in call-home config, call-home will only try to use the specified vrf table to send email messages.
Note that call-home HTTPS messages can be sent over a specified source interface on the VRF only by ip http client source-interface command, not depending on this new VRF command under call-home config mode.
Additional Information: http://cisco.com/en/US/docs/ios/ha/command/reference/ha_a1.html#wp1035245
- Software configuration updates as part of the Private Host SVI feature for 12.2(33) SRD3. This feature will she shared as part of a hidden doc for select customers.
Old Behavior: Unicast and broadcast traffic from Private host isolated ports were not sent over VPLS enabled interfaces.
New Behavior: Unicast and broadcast traffic from Private host isolated ports are sent over VPLS enabled interfaces. Private Host feature can be enabled with VPLS enabled interfaces acting as Private host promiscuous ports.
Old Behavior: If SAMI card was running a singleip application, it was not possible to execute rcal commands on TP/TCOPs from SUP through execute-on command.
New Behavior: Executing execute rcal commands on TP/TCOPs is now enabled by providing the command:
execute-on (slot)(control_proc) execute-on (traffic_proc | all) LINE
Additional Information: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html
Old Behavior: In releases later than 12.2(18)SFX and rebuilds, the mls cef tunnel fragment command is not supported in PFC3A and PFC3B modes.
New Behavior: In releases where CSCsy69228 is resolved, the mls cef tunnel fragment command is supported in PFC3A and PFC3B modes.
Additional Information: http://www.cisco.com/en/US/docs/ios/ipswitch/command/reference/isw_i1.html#mls_cef_tunnel_fragment
Old Behavior: Currently when one BTS goes down, a Cisco 7600 generates an AIS for the whole VC-12 bringing all base stations sharing VS-12 down.
New Behavior: Support a IP RAN 2G aggregation case where multiple base stations share a single VS-12 on the CEOP SPAs.
Additional Information: http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgcep.html
Old Behavior: The handling of IPv6 packets with hop-by-hop extension header was such that EARL treated them as layer 2 packets and punted all of them to the Routing Processor.
L3 ACLs could not be applied to these packets. A large number of these packets may cause a DoS attack. The requirement is to rate-limit these packets on the SIP-200 line card.
New Behavior: Rate-limiting IPv6 packets with Hop-By-Hop extension headers is supported on SIP-200.
Additional Information: http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgsip.html
Old Behavior: keepalive command is supported for ES20.
New Behavior: keepalive command is not supported.
Additional Information: http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/baldcsm.html
Old Behavior: NAT pool size of more than 15 bits was allowed, but led to high CPU during configuration.
New Behavior: When NAT pool size of more than 15 bits is configured, the following error message is thrown:
Additional Information: http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfgsip.html
Old Behavior: When using PPTP with RADIUS Accounting, the Terminate-Cause default error message displays “nas-error”.
New Behavior: When using PPTP with RADIUS Accounting the Terminate-Cause default message displays “none”.
Additional Information: http://www.cisco.com/en/US/docs/ios/vpdn/command/reference/vpd_a1.html
- The L2TP network server (LNS) must reply with the same attribute-value pairs (AVPs) it receives from the L2TP access concentrator (LAC).
Old Behavior: The LNS replied with all AVPs irrespective of the AVP it received from the LAC.
New Behavior: The LNS must reply with the same AVPs it receives from the LAC.
Additional information: http://www.cisco.com/en/US/docs/ios/vpdn/configuration/guide/config_aaa_for_vpdn_ps6922_TSD_Products_Configuration_Guide_Chapter.html
Deferrals
Cisco IOS software images are subject to deferral. Cisco recommends that you view the deferral notices at the following location to determine if your software release is affected:
http://www.cisco.com/kobayashi/sw-center/sw-ios-advisories.shtml
Field Notices and Bulletins
For general information about the types of documents listed in this section, see the following document:
http://www.cisco.com/warp/customer/cc/general/bulletin/software/general/index.shtml
- Field Notices—We recommend that you view the field notices for this release to see if your software or hardware platforms are affected. If you have an account with Cisco.com, you can find field notices at http://www.cisco.com/en/US/customer/support/tsd_products_field_notice_summary.html . If you do not have a Cisco.com login account, you can find field notices at http://www.cisco.com/en/US/customer/support/tsd_products_field_notice_summary.html .
- Product Bulletins—If you have an account with Cisco.com, you can find product bulletins at http://www.cisco.com/warp/customer/cc/general/bulletin/index.shtml . If you do not have a Cisco.com login account, you can find product bulletins at http://www.cisco.com/warp/public/cc/general/bulletin/iosw/index.shtml
Important Notes for Cisco IOS Release 12.2(33)SRE3
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(33)SRE3 and later releases.
Validated Software Upgrade Matrix to Cisco IOS Release 12.2(33)SRE3
The Cisco 7600 software upgrade matrix shows the tested and recommended image upgrade paths to Cisco IOS Release 12.2(33)SRE3. The upgrade testing was conducted with these services running in the network:
The following table shows the Cisco 7600 images tested in the upgrade test to Cisco IOS Release 12.2(33)SRE3 image. Router image upgrade was tested using 3 different methods: Reload, RPR and ISSU CLI. The FPD FW upgrade and migration of 67xx to ES+ LC was also tested. The recommended upgrade procedure for 12.2(33)SRE3 is:
1. Reload method (recommended)
3. ISSU CLI method (not recommended because of known caveat)
See the following for upgrade procedures:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/redund.html#wp1089399
Table 1 shows the validated software upgrade matrix to Cisco IOS Release 12.2(33)SRE4.
Important Notes for Cisco IOS Release 12.2(33)SRD3
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(33)SRD3.
Parity With Previous Releases
Cisco IOS Release 12.2(33)SRD3 has bug-fix parity with Cisco IOS Release 12.2(33)SRB6 and 12.2(33)SRC4. Nearly all bug fixes committed to Cisco IOS Release 12.2(33)SRB6 and 12.2(33)SRC4 have also been committed to Cisco IOS Release 12.2(33)SRD3. The following exceptions are still open in Cisco IOS Release 12.2(33)SRD3:
Important Notes for Cisco IOS Release 12.2(33)SRD2a
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(33)SRD2a and later releases.
Cisco Coarse Wavelength Division Multiplexing (CWDM) SFP Modules
Cisco IOS Release 12.2(33)SRD2a is a special rebuild that resolves a critical defect affecting the use of Cisco Coarse Wavelength Division Multiplexing (CWDM) SFP modules. This release is preferred for new deployments and for existing deployments with CWDM-SFP pluggables.
Important Notes for Cisco IOS Release 12.2(33)SRD1
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(33)SRD1 and later releases.
Important Notes for Cisco IOS Release 12.2(33)SRC1
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(33)SRC1 and later releases.
ip nbar protocol-discovery Command
On WS-X6582-2PA, the ip nbar protocol-discovery command works only on the main interface, not the subinterface. (CSCtb92628)
Important Notes for Cisco IOS Release 12.2(33)SRB
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(33)SRB and later releases.
CEoP SPA and APS
When a pseudowire is configured on an interface of a Circuit Emulation over Packet (CEoP) SPA, Automatic Protection Switching (APS) for the interface is useful only in conjunction with pseudowire redundancy.
CEoP SPA and ATMoMPLS
When ATM over MPLS (ATMoMPLS) is configured on a Circuit Emulation over Packet (CEoP) SPA, you cannot connect an ATM network to an OC-3 link nor can you connect an OC-12 network to a T1 link. In order for AToM tunnels that are configured for AAL0 encapsulation or VP mode to function over non-symmetric links, shape the VC or VP to a rate that can be carried by interfaces at both ends by configuring CBR, UBR, or UBR+.
CEoP SPA and Clock Recovery Configuration Guidelines
When configuring clock recovery in Cisco IOS Release 12.2(33)SRB, consider the following guidelines:
– Only the 24-port channelized T1/E1 ATM CEoP SPA can be used as a clock source.
– Only a single clock can be sourced for a router if adaptive clock recovery mechanism is used.
– The clock must be the same as used by the router as the network-clock. Any pseudowire in this case can carry the clock.
– The minimum bundle size of CEM pseudowires on the network which delivers robust clock recovery is 4 DS0s.
– The minimum packet size of CEM pseudowires on the network which delivers robust clock recovery is 64 bytes.
– The maximum number of differential clocks sourced from a 24-port channelized T1/E1 ATM CEoP SPA is 24.
– The 24-port channelized T1/E1 ATM CEoP SPA can recover up to 24 T1/E1 clocks.
– There are several bundles sent from the same port, the bundle which is used for carrying clock of the port is the first created bundle of the port. Only pseudowires which include the first DS0 of a port can carry differential clock.
Important Notes for Cisco IOS Release 12.2(33)SRA2
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(33)SRA2 and later releases.
Important Notes for Cisco IOS Release 12.2(33)SRA
This section describes important issues that you should be aware of for Cisco IOS Release 12.2(33)SRA and later releases.
Detection Mechanism for the MPLS Traffic Engineering (TE)—Fast Reroute (FRR) Node Protection, with RSVP Hellos Support Feature
When the detection mechanism for the MPLS Traffic Engineering (TE)—Fast Reroute (FRR) Node Protection, with RSVP Hellos Support feature is configured with a refresh interval and missed refresh limit that are too short, a neighbor may be declared down while the neighbor is actually up, and a warning message may be generated. To prevent this situation, configure the refresh interval and missed refresh limit in the following ways:
- Ensure that the interval-value argument in the ip rsvp signalling hello refresh interval interval-value command is 200 milliseconds or longer.
- Ensure that the msg-countip argument in the rsvp signalling hello [ fast-reroute ] refresh misses msg-count command has a value of 4 or more.
The detection interval for the detection mechanism should be at least 800 milliseconds (that is, 200 milliseconds of the interval-value argument multiplied by the value 4 of the msg-countip argument) or longer.
ip routing protocol purge interface Command
As of Cisco IOS Release 12.2(33)SRA, you can use the ip routing protocol purge interface command in global configuration mode to enable routing protocols to purge their routes when an interface goes down in the global configuration mode. To disable this function, use the no form of this command.
For detailed information about this command, see the “IP Routing Protocol-Independent Commands” section of the Cisco IOS IP Routing Protocols Command Reference, Release 12.2 SR :
http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/12_2sr/irp_12_2sr_book.html
Caveats
To reduce the size of these release notes, caveats have been moved to the following locations:
- Caveats for Cisco IOS Release 12.2(33)SRE through 12.2(33)SRE9
- Caveats for Cisco IOS Release 12.2(33)SRD through 12.2(33)SRD8
- Caveats for Cisco IOS Release 12.2(33)SRC through 12.2(33)SRC6
- Caveats for Cisco IOS Release 12.2(33)SRB through 12.2(33)SRB6
- Caveats for Cisco IOS Release 12.2(33)SRA through 12.2(33)SRA7