Document ID: 108998
Contents
Introduction
What are the meaning of LED lights on the SRW224P?
Related Information
Introduction
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).
Q. What are the meaning of LED lights on the SRW224P?
A.The LED lights of the switch are essential since you can physically check the status of the switch's condition as well as the other devices connected to it.
The Front Panel
The Switch's LEDs and ports are located on the front panel as seen below.
Meaning of the LED Lights
System
A green LED indicates that power is being supplied to the Switch. A solid, amber LED indicates that the Switch's power-on-self-test (POST) is in progress, but when this blinks amber that indicates that the POST has failed.
Link/Act
A green LED indicates a functional network link through the corresponding port (1 through 26) with an attached device. A blinking LED indicates that the Switch is actively sending or receiving data over that port.
PoE
A green LED indicates a powered device is connected to the corresponding port (1 through 24).
Speed
A green LED indicates a link to the corresponding port (Gigabit ports 25 and 26) is operating at 1000Mbps. No light indicates either no link or a link operating at a speed of 10/100Mbps.
Related Information
| Updated: Dec 12, 2008 | Document ID: 108998 |