Cisco Unified MeetingPlace

Document ID: 48234

Contents

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
Procedure
      Meeting Features
      Q&A Meetings
Cisco Support Community - Featured Conversations
Related Information

Introduction

This document shows you how to disable the Cisco MeetingPlace prompt that asks the user to record a name before the user joins a meeting.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on MeetingPlace, all releases.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Procedure

From the Schedule tab, make these setting adjustments.

Meeting Features

Complete these steps:

1. For the Entry Announcement setting, choose Silent.

2. For the Departure Announcement setting, choose Silent.

3. For Skip Pre-Meeting Options?, choose Yes.

4. For Disable Roll Call?, choose Yes.

Q&A Meetings

Complete these steps:

1. For the Q&A Introduction setting, choose Silent.

2. For the Q&A Departure setting, choose Silent.

Cisco Support Community - Featured Conversations

Related Information

• Voice Technology Support
• Voice and Unified Communications Product Support
• Recommended Reading: Troubleshooting Cisco IP Telephony
• Technical Support - Cisco Systems