Document ID: 51027
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
How to Hide the Join Web Conference Button
Related Information
Introduction
The procedure in this document shows how to remove the Join Web Conference button from the Current Meeting page in Cisco MeetingPlace Web. Without this button, users can not launch the Meeting Room.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on Cisco MeetingPlace Web 4.2.7 and later.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
How to Hide the Join Web Conference Button
Use this procedure to hide the Join Web Conference button:
Note: Before you begin, contact Cisco Technical Support to obtain a new 0-license Option Key string (see Step 6).
-
Launch the Cisco MeetingTime application.
-
Click the Configure tab.
-
In the System Configuration area, select System Options and click Query.
-
Click the Right Arrow button (>) until Data Conference Option appears.
-
In the Number of licenses field, enter 0.
-
Enter the correct Option Key associated with this 0-license value.
-
Restart the Cisco MeetingPlace Server.
-
Download the TN00174.zip file from Cisco Technical Support, onto the Cisco MeetingPlace Web Server.
-
Extract the HideJWCButton.reg file from that ZIP file.
-
Double-click the REG file and click Yes to install the new registry information.
-
Restart the MeetingPlace Web services.
Related Information
- Voice Technology Support
- Voice and Unified Communications Product Support
- Recommended Reading: Troubleshooting Cisco IP Telephony
- Technical Support - Cisco Systems
| Updated: Jan 31, 2006 | Document ID: 51027 |