Before you can successfully configure your Cisco DSL Router with Asymmetric Digital Subscriber Line (ADSL) service, you need specific information from your Internet Service Provider (ISP). If your ISP is unsure, unable, or unwilling to provide answers to the questions outlined below, you may not be able to correctly configure your Cisco DSL Router.
Forms are provided to help you obtain and record the information you need to build your own configuration. Choose one of two formats for each form. Note that each format has different requirements for saving text that you enter.
Important: If you need assistance with building or troubleshooting your configuration, you must have the information in these forms accessible before you contact the Cisco Technical Assistance Center (TAC).
The following form includes questions about the name of the reseller where you purchased your Cisco DSL Router and about the name of your ISP. The remaining questions you must ask your ISP. Fill in answers to all questions.
Record the following information about your private network. This information is not related to the ISP.
When you have all the information you need from your ISP and about your private network, select one of the following based on whether you have a new installation or are troubleshooting an existing one.
Main Page |
Revision | Publish Date | Comments |
---|---|---|
1.0 |
26-Sep-2006 |
Initial Release |