Cisco DSL Router Configuration and Troubleshooting Guide - RFC1483 Routing Implementation Options

Available Languages

Download Options

  • PDF     (5.5 KB)
    View with Adobe Reader on a variety of devices
Updated:October 5, 2006
Document ID:71134

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document discusses the RFC1483 routing implementation options.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Implementation Options

Select one of these RFC1483 routing implementation options for your Asymmetric Digital Subscriber Line (ADSL) service.

Select the option that describes the type of RFC1483 routing service your ISP provides.

Related Information

Revision History

Revision Publish Date Comments
1.0
05-Oct-2006
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco