CISCO REDUNDANT POWER SUPPLIES SERIES Hardware View

The world-leading Cisco PIX Security Appliance Series provides robust, enterprise-class, integrated network security services including stateful inspection firewalling, protocol and application inspection, virtual private networking (VPN), in-line intrusion protection, and rich multimedia and voice security-in cost-effective, easy-to-deploy solutions. These integrated technologies create a strong multi-layered defense for todays ever changing network environments. Ranging from compact, "plug-and-play" desktop firewalls for small and home offices to modular, carrier-class gigabit firewalls for the most demanding enterprise and service-provider environments, Cisco PIX Security Appliances provide robust security, performance, and reliability for network environments of all sizes.

CISCO RPS 300 REDUNDANT POWER SYSTEM - End Of Sale




RPS-300
Product Description Features
PWR300-AC-RPS-N1 Cisco Redundant Power System 300 (RPS 300) with 1 connector cable.
  • Less than 60 µs failover capability prevents switch reboot after an internal switch power failure.
  • Supports traditional Ethernet switches (12V output) and new inline powered Ethernet switches (-48V output) for voice-over-IP (VoIP) telephones.
  • The Cisco RPS 300, in combination with a UPS, delivers maximum network uptime by providing backup for the primary internal power supply as well as battery backup to maintain availability during power outages.
  • The Cisco RPS 300 incorporates a quick failover feature, ensuring customers that the connected device will not reboot in the event of an internal power supply failure. For example, if an internal power supply fails on one of the six connected devices, the Cisco RPS 300 automatically senses the failure and delivers uninterrupted power to that device. When a failure is detected, the Cisco RPS 300 sends status information showing that the other connected devices will not be supported until the failed device is restored or replaced.
CAB-RPS-1414= The Cisco RPS 300 is sold with one cable. Other cables must be ordered separately. 1.2 meter cable for Cisco RPS 300 to external device connection

Platform Support

  • Catalyst 4224 Access Gateway Switch
  • Catalyst 3550 Series Switches (Catalyst 3550-24 PWR is only compatible with the Cisco RPS 675)
  • Catalyst 3524-PWR XL Switch
  • Catalyst 2980G-A Switch
  • Catalyst 2950 Series Switches
  • Catalyst 2900 LRE XL Switches

Return to Top

CISCO RPS 600 REDUNDANT POWER SYSTEM - End Of Sale



RPS-600
Product Description Features
PWR600-AC-RPS-CAB 600-Watt Redundant AC Power System with DC Power Cables. Includes four CAB-RPS-2218 cables.
  • Support of up to four of any combination of 150-watt external devices (hubs, switches, routers, and access servers).
  • Dual AC inputs and power cords. Two fully redundant AC input power modules.
  • Four DC output power modules.
  • In quasi-redundant mode, the RPS can support four load units.
  • In fully redundant mode, the RPS can support two external devices with a special cable offering extremely high uptime.
  • In "redundant with reboot" mode, the RPS supports 4 switches or hubs. In this mode, AC power is connected directly to the hub or switch in addition to the power from the RPS. The RPS works in standby mode, so if the power supply in the hub or switch fails, the hub or switch will reboot and come up again powered by the RPS. (This configuration is not generally recommended due to the 30-second reboot and down time.)
PWR600-AC-RPS-NCAB T600-Watt Redundant AC Power System without DC Power Cables.

Platform Support

  • Cisco 1516M hub (HP 10Base-T Hub-16M)
  • FastHub 400 Series 10/100 hubs
  • Catalyst 1900 Series Ethernet switches
  • Catalyst 2820 Series Ethernet switches
  • Catalyst 2900 Series XL switches
  • Catalyst 3500 Series XL switches
  • Cisco 2500 Series routers
  • Cisco 2500 Series access servers
  • Cisco 2600 Series routers
  • Cisco 2600XM Series routers
  • Cisco 3620/3640 Series routers
  • Cisco 3725 Series routers
  • Cisco MC3810 Multiservice access concentrator
  • Cisco 4000 Series routers

Return to Top

CISCO RPS 675 REDUNDANT POWER SYSTEM




RPS-675
Product Description Features
PWR675-AC-RPS-N1= Cisco Redundant Power System 675 (RPS 675) with 1 connector cable
  • Less than 60 µs failover capability prevents switch reboot after an internal switch power failure.
  • Supports traditional Ethernet switches (12V output) and new inline powered Ethernet switches (-48V output) for voice-over-IP (VoIP) telephones.
  • The Cisco RPS 675, in combination with an uninterruptible power system (UPS), delivers maximum network uptime by providing backup for the primary internal power supply as well as battery backup to maintain availability during power outages.
  • The Cisco RPS 675 incorporates a quick failover feature, ensuring customers that the connected device will not reboot in the event of an internal power supply failure. For example, if an internal power supply fails on one of the six connected devices, the Cisco RPS 675 automatically senses the failure and delivers uninterrupted power to that device. When a failure is detected, the Cisco RPS 675 sends status information showing that the other connected devices will not be supported until the failed device is restored or replaced.
CAB-RPS-1614= The Cisco RPS 675 is sold with one cable. Other cables must be ordered separately. 1.2 meter cable for Cisco RPS 675 to external device connection.

Platform Support

  • Catalyst 3550 Series Switches
  • Catalyst 2980G-A Switch
  • Catalyst 2950 Series Switches
  • Catalyst 2950 Series LRE Switches
  • Catalyst 2900 LRE XL Switches

 

Return to Top