إنهاء جلسة PPPoA باستخدام المسارات الثابتة: xDSL إلى UAC Cisco 6400 باستخدام AAL5CiscoPp

[[ IP Routing = Section Start ]]
IP NAT = enabled
IP Port Address = 00, 172.22.10.254
IP Default Route for Unnumbered Links = 002, 01, 0
IP Static Route Table Entries for Unnumbered Links = 172.22.32.0, 001, 255.255.2
55.0, 1, 0;
[[ CBOS = Section Start ]]
NSOS Maximum Number of VCs = 2
NSOS Root Password = <
root password
>
NSOS Enable Password = <
enable password
>
[[ PPP Device Driver = Section Start ]]
PPP Port User Name = 00, <
username for wan0-0
>
PPP Port User Password = 00, <
password for wan0-0
>
PPP Port User Name = 01, <
username for wan0-1
>
PPP Port User Password = 01, <
password for wan0-1
>
PPP Port Option = 01, IPCP,IP Address,3,Auto,Negotiation Not Required,Negotiable
,IP,0.0.0.0
[[ DHCP = Section Start ]]
DHCP Server = enabled
DHCP Server Pool IP = 00, 172.22.10.0
DHCP Server Pool Gateway = 00, 172.22.10.254
[[ ATM WAN Device Driver = Section Start ]]
ATM WAN Virtual Connection Parms = 00, 1, 32, 0
ATM WAN Virtual Connection Parms = 01, 2, 63, 0

cbos#set nat enabled
NAT is now enabled
You must use "write" then reboot for changes to take effect.

cbos#set int wan0 maxvcs 2
You must use "write" and reboot for changes to take effect.

cbos#write
NVRAM written.

cbos#reboot
 Hello! Expanding CBOS image...
CBOS v2.3.5.012 - Release Software
User Access Verification
Password:<
root password
>

cbos>en
Password:<
enable password
>

cbos#set ppp wan0-0 login 
         
         
User name for wan0-0 has been set to router.

cbos#set ppp wan0-0 password 
         
         
Password for wan0-0 has been set to <password for wan0-0>

cbos#set ppp wan0-1 login 
         
         
Password for wan0-1 has been set to <username for wan0-1>

cbos#set ppp wan0-1 password 
         
         
Password for wan0-1 has been set to <password for wan0-1>

cbos#set ppp wan0-0 ipcp 0.0.0.0
PPP wan0-0 IPCP Address set to 0.0.0.0

cbos#set ppp wan0-1 ipcp 0.0.0.0
PPP wan0-1 IPCP Address set to 0.0.0.0

cbos#set int eth0 address 172.22.10.254
eth0 ip address changed from 10.0.0.1 to 172.22.10.254

cbos#set int eth0 netmask 255.255.255.0
eth0 netmask changed from 255.255.255.0 to 255.255.255.0
You must use "write" then reboot for changes to take effect

cbos#set dhcp server enable
DHCP Server enabled

cbos#set dhcp server pool 0 ip 172.22.10.0
Pool 0 IP parameter is now 172.22.10.0

cbos#set dhcp server pool 0 netmask 255.255.255.0
Pool 0 netmask parameter is now 255.255.255.0
Size of pool 0 is automatically changed to max size 252

cbos#set dhcp server pool 0 gateway 172.22.10.254
Pool 0 gateway parameter is now 172.22.10.254

cbos#set password exec 
         
         
Exec Password Change Successful! 

cbos#set password enable 
         
         
Enable Password Change Successful! 

cbos#set route default wan0-1
Default Route set

cbos#set route add ip 172.22.32.0 mask 255.255.255.0 gw wan0-0
Route added
cbos#set int wan0-0 close
Closing connection wan0-0

cbos#set int wan0-1 close
Closing connection wan0-1

cbos#set int wan0-0 vpi 1
Change completed.

cbos#set int wan0-0 vc1 32
Change completed.

cbos#set int wan0-1 vpi 2
Change completed.

cbos#set int wan0-1 vci 63
Change completed.

cbos#set int wan0-0 open
Opening connection wan0-0

cbos#set int wan0-1 open
Opening connection wan0-1

cbos#write
NVRAM written

cbos#reboot

interface ATM 1/1
 no ip address
 no ip directed-broadcast
 no atm ilmi-keepalive
 pvc 1 32 int atm 0/1 40 40
 pvc 2 63 int atm 0/1 50 51

interface ATM 8/0/1
 no ip address
 no ip directed-broadcast
 no atm ilmi-keepalive
 atm pvp 40 interface ATM 1/0/0 40
 atm pvp 50 interface ATM 2/0/0 50

aaa new-model
aaa authentication ppp default local
!
!
username <username for wan0-0> password <password for wan0-0>
!
!
interface ATM 0/0/0.200 multipoint
 no ip directed-broadcast
 pvc 40/40 
  encapsulation aal5ciscoppp Virtual-Template 2
!
!
interface FastEthernet 0/0/0
 ip address 172.22.32.1 255.255.255.0
 no ip directed-broadcast
!
!
interface Virtual-Template 2
 ip unnumbered FastEthernet 0/0/0
 no ip directed-broadcast
 peer default ip address pool <pool name A>
 ppp authentication pap
!
!
ip local pool <pool name A> 172.22.40.25 172.22.40.50

aaa new-model
aaa authentication ppp default local
!
!
username <username for wan0-1> password <password for wan0-1>
!
!
interface ATM 0/0/0.300 multipoint
 no ip directed-broadcast
 pvc 50/51 
  encapsulation aal5ciscoppp Virtual-Template 21
!
!
interface FastEthernet 0/0/0
 ip address 172.16.32.1 255.255.255.0
 no ip directed-broadcast
!
!
interface Virtual-Template 21
 ip unnumbered FastEthernet 0/0/0
 no ip directed-broadcast
 peer default ip address pool <pool name B>
 ppp authentication pap
!
!
ip local pool <pool name B> 172.16.100.10 172.16.100.25