Konfigurieren der TACACS+-Authentifizierung für VPDNs

Einleitung

Ein Virtual Private Dial-Up Network (VPDN) ermöglicht die Einwahl in ein privates Netzwerk über Remote-Zugriffsserver (definiert als L2TP Access Concentrator [LAC]). Wenn sich ein Point-to-Point Protocol (PPP)-Client in eine LAC einwählt, bestimmt die LAC, dass diese PPP-Sitzung an einen L2TP-Netzwerkserver (LNS) für diesen Client weitergeleitet werden soll, der dann den Benutzer authentifiziert und die PPP-Aushandlung startet. Nach Abschluss der PPP-Einrichtung werden alle Frames über die LAC an den Client und das LNS gesendet.

In dieser Beispielkonfiguration können Sie die TACACS+-Authentifizierung mit Virtual Private Dial-Up Networks (VPDNs) verwenden. Die LAC fragt den TACACS+-Server ab, bestimmt, welches LNS den Benutzer weiterleiten soll, und richtet den entsprechenden Tunnel ein.

Weitere Informationen zu VPDNs finden Sie unter Understanding VPDN.

Voraussetzungen

Anforderungen

Es gibt keine spezifischen Anforderungen für dieses Dokument.

Verwendete Komponenten

Die Informationen in diesem Dokument basierend auf folgenden Software- und Hardware-Versionen:

• Cisco Secure ACS für UNIX Version 2.x.x oder höher oder TACACS+-Freeware

• Cisco IOS^® Softwareversion 11.2 und höher

Die Informationen in diesem Dokument beziehen sich auf Geräte in einer speziell eingerichteten Testumgebung. Alle Geräte, die in diesem Dokument benutzt wurden, begannen mit einer gelöschten (Nichterfüllungs) Konfiguration. Wenn Ihr Netz Live ist, überprüfen Sie, ob Sie die mögliche Auswirkung jedes möglichen Befehls verstehen.

Konventionen

Weitere Informationen zu Dokumentkonventionen finden Sie unter Cisco Technical Tips Conventions (Technische Tipps von Cisco zu Konventionen).

Konfigurieren

In diesem Abschnitt werden die erforderlichen Informationen zum Konfigurieren der in diesem Dokument beschriebenen Funktionen beschrieben.

In diesem Beispiel lautet der Benutzer "jsmith@hp.com" mit dem Kennwort "test". Wenn sich "jsmith@hp.com" in den ISP-Router einwählt, sendet der ISP-Router die Benutzer-ID "hp.com" an den TACACS+-Server des ISP. Der ISP-Server findet die Benutzer-ID "hp.com" und sendet seine Tunnel-ID ("isp"), die IP-Adresse des Home-Gateway-Routers (HGW) (10.31.1.50), das Network Access Server (NAS)-Kennwort ("hello") und das Gateway-Kennwort ("there") zurück an den ISP-Router.

Der ISP-Router initiiert einen Tunnel und stellt eine Verbindung zum HGW-Router her, der die Kennwörter für die Benutzer-ID "hp-gw" ("there") und dann die Benutzer-ID "isp" ("hello") an den HGW-TACACS+-Server weiterleitet. Sobald die Tunnel eingerichtet sind, leitet der ISP-Router die Benutzer-ID ("jsmith@hp.com") und das Kennwort ("test") des Benutzers, der sich einwählt, an den HGW-Router weiter. Dieser Benutzer wird auf dem HGW-Server authentifiziert. In den Beispielkonfigurationen in diesem Dokument lautet der Hostname des ISP-Routers "koala" und der Hostname des HGW-Routers "thing_one".

Hinweis: Verwenden Sie das Tool für die Suche nach Befehlen (nur für registrierte Kunden), um weitere Informationen zu den in diesem Abschnitt verwendeten Befehlen zu erhalten.

Netzwerkdiagramm

In diesem Dokument wird die in dieser Abbildung gezeigte Netzwerkeinrichtung verwendet.

TACACS+-Serverkonfigurationen

In diesem Dokument werden die hier gezeigten Serverkonfigurationen verwendet.

• TACACS+-Freeware

• Cisco Secure ACS für UNIX 2.x.x

TACACS+-Freeware

!--- This user is on the ISP TACACS+ server. !--- The profile includes the Tunnel ID ("isp"), the IP address !--- of the Peer (10.31.1.50), !--- and the passwords used to authenticate the tunnel. !--- The ISP uses these attibutes to establish the tunnel.

user = hp.com {
service = ppp protocol = vpdn {
tunnel-id = isp
ip-addresses = "10.31.1.50"
nas-password = "hello"
gw-password = "there"
}
}


!--- The next three users are on the HGW server.

user = isp {
chap = cleartext "hello"
service = ppp protocol = ip {
default attribute = permit
}
}

user = hp-gw {
chap = cleartext "there"
service = ppp protocol = ip {
default attribute = permit
}
}

user = jsmith@hp.com {
chap = cleartext "test"
service = ppp protocol = ip {
default attribute = permit
}
}

Cisco Secure ACS für UNIX 2.x.x

!--- This user is on the ISP server.

# ./ViewProfile -p 9900 -u hp.com
User Profile Information
user = hp.com{
profile_id = 83 
profile_cycle = 1 
service=ppp {
protocol=vpdn {
set tunnel-id=isp
set ip-addresses="10.31.1.50"
set nas-password="hello"
set gw-password="there"
} 
protocol=lcp {
} 
} 

}


!--- The next three users are on the HGW server. !--- The next two usernames are used to authenticate the LAC !--- during tunnel initialization.

# ./ViewProfile -p 9900 -u isp
User Profile Information
user = isp{
profile_id = 84 
profile_cycle = 1 
password = chap "********" 
service=ppp {
protocol=ip {
default attribute=permit
} 
protocol=lcp {
} 
} 

}

# ./ViewProfile -p 9900 -u hp-gw
User Profile Information
user = hp-gw{
profile_id = 82 
profile_cycle = 1 
password = chap "********" 
service=ppp {
protocol=ip {
default attribute=permit
} 
protocol=lcp {
} 
} 

}

!--- This username is used to authenticate the end user !--- after the tunnel is established.

# ./ViewProfile -p 9900 -u jsmith@hp.com
User Profile Information
user = jsmith@hp.com{
profile_id = 85 
profile_cycle = 1 
password = chap "********" 
service=ppp {
protocol=ip {
default attribute=permit
} 
protocol=lcp {
} 
} 

}

Router-Konfigurationen

In diesem Dokument werden die hier gezeigten Konfigurationen verwendet.

• ISP-Router

• HGW-Router

koala#show running config
Building configuration...

Current configuration:
!
version 11.2
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname koala
!
aaa new-model
aaa authentication ppp default tacacs+ none
aaa authorization network tacacs+ none
aaa accounting network start-stop tacacs+

enable password ww
!

!--- VPDN is enabled.

vpdn enable
!
interface Ethernet0
ip address 10.31.1.5 255.255.255.0
!
interface Serial0
shutdown
!
interface Serial1
shutdown
!
interface Async1
ip unnumbered Ethernet0
encapsulation ppp
async mode dedicated
no cdp enable
ppp authentication chap
!
ip default-gateway 10.31.1.1
no ip classless
ip route 0.0.0.0 0.0.0.0 10.31.1.1
!

!--- Specify the TACACS server information on the NAS.

tacacs-server host 171.68.120.194
tacacs-server key cisco
no tacacs-server directed-request
snmp-server community public RW
snmp-server enable traps config
!
line con 0
password ww
line 1 16
password ww
autoselect ppp
modem InOut
transport input all
stopbits 1
rxspeed 115200
txspeed 115200
flowcontrol hardware
line aux 0
line vty 0 4
exec-timeout 0 0
password ww
!
end

thing_one#show running config
Building configuration...

Current configuration:
!
version 11.2
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname thing_one
!
aaa new-model
aaa authentication ppp default tacacs+ none
aaa authorization network tacacs+ none
enable password ww
!

!--- Enable VPDN.

vpdn enable

!--- Specify the remote host ("isp" on the network access server) !--- and the local name ("hp-gw" on the home gateway) to use to authenticate. !--- Also specify the virtual template to use. !--- The local name and the remote host name must match !--- the ones in the TACACS server.

vpdn incoming isp hp-gw virtual-template 1
!
interface Loopback0
shutdown
!
interface Ethernet0
ip address 10.31.1.50 255.255.255.0
!
interface Virtual-Template1

!--- Create a virtual template interface.

ip unnumbered Ethernet0

!--- Un-number the Virtual interface to an available LAN interface.

peer default ip address pool async

!--- Use the pool "async" to assign the IP address for incoming connections.

ppp authentication chap

!--- Use CHAP authentication for the incoming connection.

!
interface Serial0
shutdown
!
interface Serial1
shutdown
!
ip local pool async 15.15.15.15
no ip classless
ip route 0.0.0.0 0.0.0.0 10.31.1.1
!
tacacs-server host 171.68.118.101
no tacacs-server directed-request
tacacs-server key cisco

!--- Specify the TACACS+ server information on the NAS.

!
line con 0
exec-timeout 0 0
line 1 8
line aux 0
line vty 0 4
!
end

Überprüfung

Für diese Konfiguration ist derzeit kein Überprüfungsverfahren verfügbar.

Fehlerbehebung

In diesem Abschnitt finden Sie Informationen zur Behebung von Fehlern in Ihrer Konfiguration.

Befehle für die Fehlerbehebung

Hinweis: Bevor Sie Debug-Befehle ausgeben, lesen Sie bitte Wichtige Informationen zu Debug-Befehlen.

• debug aaa authentication: Zeigt Informationen zur Authentifizierung, Autorisierung und Abrechnung (AAA)/TACACS+-Authentifizierung an.

• debug aaa Authorization (AAA/TACACS+-Autorisierung): Zeigt Informationen zur AAA-/TACACS+-Autorisierung an.

• debug ppp negotiation - Zeigt PPP-Pakete an, die während des PPP-Starts übertragen wurden, wobei PPP-Optionen ausgehandelt werden.

• debug tacacs+: Zeigt detaillierte Debuginformationen zu TACACS+ an.

• debug vpdn errors: Zeigt Fehler an, die verhindern, dass ein PPP-Tunnel erstellt wird, oder Fehler, die dazu führen, dass ein erstellter Tunnel geschlossen wird.

• debug vpdn events: Zeigt Meldungen zu Ereignissen an, die Teil des normalen Aufbaus oder Herunterfahrens des PPP-Tunnels sind.

• debug vpdn l2f-errors: Zeigt Layer-2-Protokollfehler an, die die Layer-2-Einrichtung oder den normalen Betrieb verhindern.

• debug vpdn l2f-events: Zeigt Meldungen zu Ereignissen an, die Teil des normalen Aufbaus oder Herunterfahrens des PPP-Tunnels für Layer 2 sind.

• debug vpdn l2f-packages: Zeigt Meldungen zu Layer 2 Forwarding-Protokoll-Headern und zum Status an.

• debug vpdn packages: Zeigt L2TP-Fehler (Layer 2 Tunnel Protocol) und Ereignisse an, die Teil des normalen Tunnelaufbaus bzw. -abbaus für VPDNs sind.

• debug vtemplate: Zeigt Kloninformationen für eine virtuelle Zugriffsschnittstelle an, die von dem Zeitpunkt an, zu dem sie von einer virtuellen Vorlage geklont wird, bis zu dem Zeitpunkt angezeigt werden, zu dem die virtuelle Zugriffsschnittstelle nach Beendigung des Anrufs ausfällt.

Beispielausgabe einer Fehlersuche

Diese Debugs werden als Referenz bereitgestellt.

• Fehlerbehebung mit ISP-Router

• HGW-Router - Fehlerbehebung

• Fehlerbehebungen für fehlgeschlagene Verbindungen auf dem ISP-Router

• Fehlerbehebungen für fehlgeschlagene Verbindungen auf dem HGW-Router

Fehlerbehebung mit ISP-Router

koala#show debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
AAA Accounting debugging is on
VPN:
VPN events debugging is on
VPN errors debugging is on
koala#
%LINK-3-UPDOWN: Interface Async1, changed state to up
15:04:47: VPDN: Looking for tunnel -- hp.com --
15:04:47: AAA/AUTHEN: create_user (0x15FA80) user='hp.com' ruser='' 
   port='Async1' rem_addr='' authen_type=NONE service=LOGIN priv=0
15:04:47: AAA/AUTHOR/VPDN: : (2445181346): user='hp.com'
15:04:47: AAA/AUTHOR/VPDN: : (2445181346): send AV service=ppp
15:04:47: AAA/AUTHOR/VPDN: : (2445181346): send AV protocol=vpdn
15:04:47: AAA/AUTHOR/VPDN: : (2445181346): Method=TACACS+
15:04:47: AAA/AUTHOR/TAC+: (2445181346): user=hp.com
15:04:47: AAA/AUTHOR/TAC+: (2445181346): send AV service=ppp
15:04:47: AAA/AUTHOR/TAC+: (2445181346): send AV protocol=vpdn
15:04:47: TAC+: (2445181346): received author response status = PASS_ADD

15:04:47: AAA/AUTHOR (2445181346): Post authorization status = PASS_ADD
15:04:47: AAA/AUTHOR/VPDN: Processing AV service=ppp
15:04:47: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
15:04:47: AAA/AUTHOR/VPDN: Processing AV tunnel-id=isp
15:04:47: AAA/AUTHOR/VPDN: Processing AV ip-addresses=10.31.1.50
15:04:47: AAA/AUTHOR/VPDN: Processing AV nas-password=hello
15:04:47: AAA/AUTHOR/VPDN: Processing AV gw-password=there
15:04:47: VPDN: Get tunnel info with NAS isp GW hp.com, IP 10.31.1.50

!--- The TACACS+ server returns the attributes the !--- NAS should use for the tunnel. !--- The tunnel-id is "ISP" and the IP address of HGW is 10.31.1.50.

15:04:47: AAA/AUTHEN: free_user (0x15FA80) user='hp.com' ruser='' 
   port='Async1' rem_addr='' authen_type=NONE service=LOGIN priv=0
15:04:47: VPDN: Forward to address 10.31.1.50
15:04:47: As1 VPDN: Forwarding...
15:04:47: AAA/AUTHEN: create_user (0x118008) user='jsmith@hp.com' ruser=''
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1
15:04:47: As1 VPDN: Bind interface direction=1
15:04:47: As1 VPDN: jsmith@hp.com is forwarded
%LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, changed state to up
15:04:49: AAA/ACCT: NET acct start. User jsmith@hp.com, Port Async1: Async1

!--- User finishes and disconnects.

%LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, 
   changed state to down
%LINK-5-CHANGED: Interface Async1, changed state to reset
15:05:27: As1 VPDN: Cleanup
15:05:27: As1 VPDN: Reset
15:05:27: As1 VPDN: Reset
15:05:27: As1 VPDN: Unbind interface
15:05:27: AAA/ACCT: Network acct stop. User jsmith@hp.com, Port Async1:
task_id=2 timezone=UTC service=vpdn bytes_in=1399 bytes_out=150 paks_in=27
   paks_out=9 elapsed_time=38 
%LINK-3-UPDOWN: Interface Async1, changed state to down
15:05:30: AAA/AUTHEN: free_user (0x118008) user='jsmith@hp.com' ruser=''
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1
koala#

HGW-Router - Fehlerbehebung

thing_one#show debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
AAA Accounting debugging is on
VPN:
VPN events debugging is on
VPN errors debugging is on
VTEMPLATE:
Virtual Template debugging is on
thing_one#

15:04:46: AAA/AUTHEN: create_user (0x15E6E0) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: TAC+: ver=192 id=969200103 received AUTHEN status = PASS
15:04:46: AAA/AUTHEN: free_user (0x15E6E0) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: AAA/AUTHEN (3252085483): status = PASS
15:04:46: AAA/AUTHEN: free_user (0x15CBEC) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: AAA/AUTHEN: create_user (0x15F1B8) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: AAA/AUTHEN/START (3897539709): port='' list='default' 
   action=LOGIN service=PPP
15:04:46: AAA/AUTHEN/START (3897539709): found list default
15:04:46: AAA/AUTHEN/START (3897539709): Method=TACACS+
15:04:46: TAC+: send AUTHEN/START packet ver=193 id=3897539709
15:04:46: TAC+: ver=192 id=3897539709 received AUTHEN status = GETPASS
15:04:46: AAA/AUTHEN: create_user (0x15E6F0) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: TAC+: ver=192 id=2306139011 received AUTHEN status = PASS
15:04:46: AAA/AUTHEN: free_user (0x15E6F0) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: AAA/AUTHEN (3897539709): status = PASS
15:04:46: VPDN: Chap authentication succeeded for isp

!--- The LAC ("ISP") is succesfully authenticated.

15:04:46: AAA/AUTHEN: free_user (0x15F1B8) user='isp' ruser='' port='' 
rem_addr='' authen_type=CHAP service=PPP priv=1
15:04:46: Vi1 VTEMPLATE: Reuse Vi1, recycle queue size 0
15:04:46: Vi1 VTEMPLATE: Set default settings with no ip address
15:04:47: Vi1 VTEMPLATE: Hardware address 00e0.1e68.942c
15:04:47: Vi1 VPDN: Virtual interface created for jsmith@hp.com
15:04:47: Vi1 VPDN: Set to Async interface
15:04:47: Vi1 VPDN: Clone from Vtemplate 1 filterPPP=0 blocking
15:04:47: Vi1 VTEMPLATE: Has a new cloneblk vtemplate, now it has vtemplate
15:04:47: Vi1 VTEMPLATE: Undo default settings
15:04:47: Vi1 VTEMPLATE: ************* CLONE VACCESS1 *****************
15:04:47: Vi1 VTEMPLATE: Clone from vtemplate1
interface Virtual-Access1
no ip address
encap ppp
ip unnum eth 0
peer default ip address pool async 
ppp authen chap
end

%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
15:04:48: Vi1 VPDN: Bind interface direction=2
15:04:48: Vi1 VPDN: PPP LCP accepted sent & rcv CONFACK
15:04:48: Vi1 VPDN: Virtual interface iteration
15:04:48: AAA/AUTHEN: create_user (0x161688) user='jsmith@hp.com' ruser=''
   port='Virtual-Access1' rem_addr='async' authen_type=CHAP service=PPP priv=1
15:04:48: AAA/AUTHEN/START (580760432): port='Virtual-Access1' list='' 
   action=LOGIN service=PPP
15:04:48: AAA/AUTHEN/START (580760432): using "default" list
15:04:48: AAA/AUTHEN/START (580760432): Method=TACACS+
15:04:48: TAC+: send AUTHEN/START packet ver=193 id=580760432
15:04:48: Vi1 VPDN: Virtual interface iteration
15:04:49: TAC+: ver=192 id=580760432 received AUTHEN status = GETPASS

!--- Authenticate user jsmith@hp.com with the TACACS+ server.

15:04:49: AAA/AUTHEN: create_user (0x1667C0) user='jsmith@hp.com' ruser=''
 port='Virtual-Access1' rem_addr='async' authen_type=CHAP service=PPP priv=1
15:04:49: TAC+: ver=192 id=2894253624 received AUTHEN status = PASS
15:04:49: AAA/AUTHEN: free_user (0x1667C0) user='jsmith@hp.com' ruser=''
 port='Virtual-Access1' rem_addr='async' authen_type=CHAP service=PPP priv=1
15:04:49: AAA/AUTHEN (580760432): status = PASS
15:04:49: AAA/AUTHOR/LCP Vi1: Authorize LCP
15:04:49: AAA/AUTHOR/LCP: Virtual-Access1: (687698354): user='jsmith@hp.com'
15:04:49: AAA/AUTHOR/LCP: Virtual-Access1: (687698354): send AV service=ppp
15:04:49: AAA/AUTHOR/LCP: Virtual-Access1: (687698354): send AV protocol=lcp
15:04:49: AAA/AUTHOR/LCP: Virtual-Access1: (687698354): Method=TACACS+
15:04:49: AAA/AUTHOR/TAC+: (687698354): user=jsmith@hp.com
15:04:49: AAA/AUTHOR/TAC+: (687698354): send AV service=ppp
15:04:49: AAA/AUTHOR/TAC+: (687698354): send AV protocol=lcp
15:04:49: TAC+: (687698354): received author response status = PASS_ADD
15:04:49: AAA/AUTHOR (687698354): Post authorization status = PASS_ADD
15:04:49: AAA/ACCT: NET acct start. User jsmith@hp.com, Port Virtual-Access1:
 Virtual-Access1
15:04:49: AAA/AUTHOR/FSM Vi1: (0): Can we start IPCP?
15:04:49: AAA/AUTHOR/FSM: Virtual-Access1: (3562892028): user='jsmith@hp.com'
15:04:49: AAA/AUTHOR/FSM: Virtual-Access1: (3562892028): send AV service=ppp
15:04:49: AAA/AUTHOR/FSM: Virtual-Access1: (3562892028): send AV protocol=ip
15:04:49: AAA/AUTHOR/FSM: Virtual-Access1: (3562892028): Method=TACACS+
15:04:49: AAA/AUTHOR/TAC+: (3562892028): user=jsmith@hp.com
15:04:49: AAA/AUTHOR/TAC+: (3562892028): send AV service=ppp
15:04:49: AAA/AUTHOR/TAC+: (3562892028): send AV protocol=ip
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, 
   changed state to up
15:04:49: TAC+: (3562892028): received author response status = PASS_ADD
15:04:49: AAA/AUTHOR (3562892028): Post authorization status = PASS_ADD

!--- IPCP negotiation begins.

15:04:49: AAA/AUTHOR/FSM Vi1: We can start IPCP
15:04:50: AAA/AUTHOR/IPCP Vi1: Start. Her address 0.0.0.0, we want 0.0.0.0
15:04:50: AAA/AUTHOR/IPCP Vi1: Processing AV service=ppp
15:04:50: AAA/AUTHOR/IPCP Vi1: Processing AV protocol=ip
15:04:50: AAA/AUTHOR/IPCP Vi1: Authorization succeeded
15:04:50: AAA/AUTHOR/IPCP Vi1: Done. Her address 0.0.0.0, we want 0.0.0.0
15:04:51: AAA/AUTHOR/IPCP Vi1: Start. Her address 0.0.0.0, 
   we want 15.15.15.15
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV service=ppp
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV protocol=ip
15:04:51: AAA/AUTHOR/IPCP Vi1: Authorization succeeded
15:04:51: AAA/AUTHOR/IPCP Vi1: Done. Her address 0.0.0.0, 
   we want 15.15.15.15
15:04:51: AAA/AUTHOR/IPCP Vi1: Start. Her address 15.15.15.15, 
   we want 15.15.15.15
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   user='jsmith@hp.com'
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   send AV service=ppp
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   send AV protocol=ip
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   send AV addr*15.15.15.15
15:04:51: AAA/AUTHOR/IPCP: Virtual-Access1: (3193852847): 
   Method=TACACS+
15:04:51: AAA/AUTHOR/TAC+: (3193852847): user=jsmith@hp.com
15:04:51: AAA/AUTHOR/TAC+: (3193852847): send AV service=ppp
15:04:51: AAA/AUTHOR/TAC+: (3193852847): send AV protocol=ip
15:04:51: AAA/AUTHOR/TAC+: (3193852847): send AV addr*15.15.15.15
15:04:51: TAC+: (3193852847): received author response status = PASS_ADD
15:04:51: AAA/AUTHOR (3193852847): Post authorization status = PASS_ADD
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV service=ppp
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV protocol=ip
15:04:51: AAA/AUTHOR/IPCP Vi1: Processing AV addr*15.15.15.15
15:04:51: AAA/AUTHOR/IPCP Vi1: Authorization succeeded
15:04:51: AAA/AUTHOR/IPCP Vi1: Done. Her address 15.15.15.15, 
   we want 15.15.15.15

!--- User finishes and disconnects.

15:05:24: Vi1 VPDN: Reset
15:05:24: Vi1 VPDN: Reset
%LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
15:05:24: Vi1 VPDN: Cleanup
15:05:24: Vi1 VPDN: Reset
15:05:24: Vi1 VPDN: Reset
15:05:24: Vi1 VPDN: Unbind interface
15:05:24: Vi1 VTEMPLATE: Free vaccess
15:05:24: Vi1 VPDN: Reset
15:05:24: Vi1 VPDN: Reset
15:05:24: AAA/ACCT: Network acct stop. User jsmith@hp.com, 
   Port Virtual-Access1:
task_id=2 timezone=UTC service=ppp protocol=ip addr=15.15.15.15 
   bytes_in=564 
bytes_out=142 paks_in=15 paks_out=8 elapsed_time=35 
15:05:24: AAA/AUTHEN: free_user (0x161688) user='jsmith@hp.com' ruser=''
   port='Virtual-Access1' rem_addr='async' 
   authen_type=CHAP service=PPP priv=1
%LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
 changed state to down
15:05:25: VTEMPLATE: Clean up dirty vaccess queue, size 1
15:05:25: Vi1 VTEMPLATE: Found a dirty vaccess clone with vtemplate
15:05:25: Vi1 VTEMPLATE: ************ UNCLONE VACCESS1 **************
15:05:25: Vi1 VTEMPLATE: Unclone to-be-freed command#5
interface Virtual-Access1
default ppp authen chap
default peer default ip address pool async 
default ip unnum eth 0
default encap ppp
default ip address
end

15:05:26: Vi1 VTEMPLATE: Set default settings with no ip address
15:05:26: Vi1 VTEMPLATE: Remove cloneblk vtemplate with vtemplate
15:05:26: Vi1 VTEMPLATE: Add vaccess to recycle queue, queue size=1
thing_one#

Fehlerbehebungen für fehlgeschlagene Verbindungen auf ISP-Routern

koala#show debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
AAA Accounting debugging is on
VPN:
VPN events debugging is on
VPN errors debugging is on
koala#

!--- Problem 1: !--- The ISP TACACS+ server is down. !--- There is no output on the HGW router !--- because the call has not gone that far.

AAA/AUTHOR (3015476150): Post authorization status = ERROR
AAA/AUTHOR/VPDN: : (3015476150): Method=NOT_SET
AAA/AUTHOR/VPDN: : (3015476150): no methods left to try
AAA/AUTHOR (3015476150): Post authorization status = ERROR
VPDN: (hp.com) Authorization failed, could not talk to AAA server or
 local tunnel problem

!--- Problem 2: !--- Userid hp.com is not in the ISP server. !--- There is no output on the Gateway router !--- because the call has not gone that far.

TAC+: (894828802): received author response status = PASS_ADD
AAA/AUTHOR (894828802): Post authorization status = PASS_ADD
VPDN: (hp.com) Authorization failed, had talked to AAA server;
   but both Tunnel ID and IP address are missing
AAA/AUTHEN: free_user (0x16A6E4) user='hp.com' ruser='' 
   port='Async1' rem_addr='' authen_type=NONE service=LOGIN priv=0
AAA/AUTHEN: create_user (0x16CA8C) user='jsmith@hp.com' ruser='' 
   port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1
AAA/AUTHEN/START (1904487288): port='Async1' list='' 
   action=LOGIN service=PPP
AAA/AUTHEN/START (1904487288): using "default" list
AAA/AUTHEN (1904487288): status = UNKNOWN
AAA/AUTHEN/START (1904487288): Method=TACACS+
TAC+: send AUTHEN/START packet ver=193 id=1904487288
TAC+: ver=193 id=1904487288 received AUTHEN status = FAIL
AAA/AUTHEN (1904487288): status = FAIL

Fehlerbehebungen für fehlgeschlagene Verbindungen auf dem HGW-Router

thing_one#show debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
AAA Accounting debugging is on
VPN:
VPN events debugging is on
VPN errors debugging is on
VTEMPLATE:
Virtual Template debugging is on
thing_one#

!--- Problem 1: !--- The problem is in the tunnel definition on HGW router. !--- In the HGW configuration, vpdn incoming hp-gw isp virtual-template 1 !--- is inserted instead of vpdn incoming isp hp-gw virtual-template 1 !--- The debug vpdn l2f-errors command displays.

L2F: Couldn't find tunnel named isp
L2F: Couldn't find tunnel named isp

!--- Problem 2: !--- This message appears when User hp-gw is not in the HGW server.

TAC+: ver=192 id=1920941753 received AUTHEN status = FAIL
AAA/AUTHEN: free_user (0x138C34) user='hp-gw' ruser='' 
   port='' rem_addr='' authen_type=CHAP service=PPP priv=1
AAA/AUTHEN (3006335673): status = FAIL
VPDN: authentication failed, couldn't find user information for hp-gw

!--- Problem 3: !--- This appears when user isp is not in the HGW server.

TAC+: ver=192 id=1917558147 received AUTHEN status = FAIL
AAA/AUTHEN: free_user (0x15F20C) user='isp' ruser='' 
   port='' rem_addr='' authen_type=CHAP service=PPP priv=1
AAA/AUTHEN (1949507921): status = FAIL
VPDN: authentication failed, couldn't find user information for isp

!--- Problem 4: !--- This message appears when User jsmith@hp.com is !--- not in the HGW server:

TAC+: ver=192 id=755036341 received AUTHEN status = FAIL
AAA/AUTHEN: free_user (0x15F89C) user='jsmith@hp.com' ruser=''
   port='Virtual-Access1' rem_addr='async' authen_type=CHAP service=PPP priv=1
AAA/AUTHEN (2606986667): status = FAIL

Zugehörige Informationen

• Cisco Secure ACS für UNIX - Support-Seite
• TACACS+-Support-Seite
• Technischer Support und Dokumentation für Cisco Systeme