The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL15067
Cisco announces the end-of-sale and end-of-life dates for the Cisco Jumpstart Appliance for Cisco Prime Network Registrar 10.0, 10.1. The last day to order the affected product(s) is July 30, 2023. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-life milestones and dates for the Cisco Jumpstart Appliance for Cisco Prime Network Registrar 10.0, 10.1
| Milestone |
Definition |
Date |
| End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
April 30, 2023 |
| End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
July 30, 2023 |
| Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
October 28, 2023 |
| End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
July 29, 2024 |
| End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
July 29, 2024 |
| End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
July 29, 2024 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
July 29, 2025 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
October 25, 2027 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
July 31, 2025 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
July 31, 2028 |
Table 2. Product part numbers affected by this announcement
| End-of-Sale Product Part Number |
Product Description |
Replacement Product Part Number |
Replacement Product Description |
Additional Information |
| PNR-10-DCSH-APL-K9 |
Network Registrar DNS caching Jumpstart Appliance |
PNR-APL-DCSH-K9 |
PNR Jumpstart Appliance for DNS Cache |
- |
| PNR-10-DD-1K |
Included Jumpstart component for preloaded DNS Cache SW |
There is currently no replacement product available for this product. |
- |
- |
| PNR-10-DD-APL-K9 |
Network Registrar DHCP/DNS Authoritative Jumpstart Appliance |
PNR-APL-DHCPDNS-K9 |
PNR Jumpstart Appliance for DHCP and Authoritative DNS |
- |
| PNR-10-DNSCSH |
Included Jumpstart component for preloaded DHCPDNS SW |
There is currently no replacement product available for this product. |
- |
- |
| PNR-CPU-I4210 |
Intel 4210 2.2 GHz/85W 10C/13.75MB DDR4 2400MHz |
There is currently no replacement product available for this product. |
- |
- |
| PNR-MR-X16G1RT-H |
16GB DDR4-2666-MHz RDIMM/PC4-21300/single rank/x4/1.2v |
There is currently no replacement product available for this product. |
- |
- |
| PNR-HD300G15K12N |
300GB 12G SAS 15K RPM SFF HDD |
There is currently no replacement product available for this product. |
- |
- |
| PNR-SD800GK3X-EP |
^800GB 2.5in Enterprise Performance 12G SAS SSD(3X endurance) |
There is currently no replacement product available for this product. |
- |
- |
| PNR-TPM2-002 |
Trusted Platform Module 2.0 for UCS servers |
There is currently no replacement product available for this product. |
- |
- |
| PNR-RAID-M5 |
Cisco 12G Modular RAID controller with 2GB cache |
There is currently no replacement product available for this product. |
- |
- |
| PNR-PSU1-770W |
Cisco UCS 770W AC Power Supply for Rack Server |
There is currently no replacement product available for this product. |
- |
- |
| PNR-MSD-32G |
32GB Micro SD Card for UCS M5 servers |
There is currently no replacement product available for this product. |
- |
- |
| CPNR-SW10-M5-K9 |
Cisco Prime Network Registrar Jumpstart top level |
There is currently no replacement product available for this product. |
- |
- |
| CPNR-SW11-M5-K9 |
PNR 11.x Jumpstart SW |
There is currently no replacement product available for this product. |
- |
- |
| APL-VMWARE-F6-LIC |
Cisco Prime Access/Network Registrar JS- VMWare License |
There is currently no replacement product available for this product. |
- |
- |
| PNRP100-DCSH-NM-K9 |
Cisco PNR DNS Caching Server - No Media |
There is currently no replacement product available for this product. |
- |
- |
| PNRP100-DD-NM-K9 |
Cisco PNR DHCP/DNS 10.0 Base - 1000 IP Nodes - No Media |
There is currently no replacement product available for this product. |
- |
- |
| PNRP100-DHCP-NM-K9 |
Cisco PNR DHCP 10.0 Base - 1000 IP Leases - No Media |
There is currently no replacement product available for this product. |
- |
- |
| PNRP100-DNS-NM-K9 |
Cisco PNR DNS 10.0 Base - 1000 RRs - No Media |
There is currently no replacement product available for this product. |
- |
- |
| CVG-HDD300GI2F105= |
300 GB HD (Spare) |
There is currently no replacement product available for this product. |
- |
- |
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/c/en/us/products/eos-eol-policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/c/en/us/products/warranty-listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://cway.cisco.com/mynotifications.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.