The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL14920
Cisco announces the end-of-sale and end-of-life dates for the Cisco DWDM-SFP-XXXX (1G DWDM Transceiver Modules). The last day to order the affected product(s) is June 16, 2023. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-life milestones and dates for the Cisco DWDM-SFP-XXXX (1G DWDM Transceiver Modules)
Milestone |
Definition |
Date |
End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
December 16, 2022 |
End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
June 16, 2023 |
Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
September 14, 2023 |
End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
June 15, 2024 |
End of Vulnerability/Security Support: |
The last date that Cisco Engineering may release a planned maintenance release or scheduled software remedy for a security vulnerability issue. |
June 30, 2028 |
End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
June 15, 2024 |
End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
June 15, 2024 |
End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
September 11, 2027 |
Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
June 30, 2028 |
Table 2. Product part numbers affected by this announcement
End-of-Sale Product Part Number |
Product Description |
DWDM-SFP-3033= |
DWDM SFP 1530.33 nm SFP (100 GHz ITU grid) |
DWDM-SFP-3112= |
DWDM SFP 1531.12 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-3190= |
DWDM SFP 1531.90 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-3268= |
DWDM SFP 1532.68 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-3346= |
DWDM SFP 1533.47 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-3425= |
DWDM SFP 1534.25 nm SFP (100 GHz ITU grid) |
DWDM-SFP-3504= |
DWDM SFP 1535.04 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-3582= |
DWDM SFP 1535.82 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-3661= |
DWDM SFP 1536.61 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-3739= |
DWDM SFP 1537.40nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-3819= |
DWDM SFP 1538.19 nm SFP (100 GHz ITU grid) |
DWDM-SFP-3898= |
DWDM SFP 1538.98 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-3977= |
DWDM SFP 1539.77 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4056= |
DWDM SFP 1540.56 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4134= |
DWDM SFP 1541.35nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4214= |
DWDM SFP 1542.14 nm SFP (100 GHz ITU grid) |
DWDM-SFP-4294= |
DWDM SFP 1542.94 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4373= |
DWDM SFP 1543.73 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4453= |
DWDM SFP 1544.53 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4532= |
DWDM SFP 1545.32nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4612= |
DWDM SFP 1546.12 nm SFP (100 GHz ITU grid) |
DWDM-SFP-4692= |
DWDM SFP 1546.92 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4772= |
DWDM SFP 1547.72 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4851= |
DWDM SFP 1548.51 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-4931= |
DWDM SFP 1549.32nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-5012= |
DWDM SFP 1550.12 nm SFP (100 GHz ITU grid) |
DWDM-SFP-5092= |
DWDM SFP 1550.92 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-5252= |
DWDM SFP 1552.52 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-5332= |
DWDM SFP 1553.33nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-5413= |
DWDM SFP 1554.13 nm SFP (100 GHz ITU grid) |
DWDM-SFP-5494= |
DWDM SFP 1554.94 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-5575= |
DWDM SFP 1555.75 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-5655= |
DWDM SFP 1556.55 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-5736= |
DWDM SFP 1557.36nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-5817= |
DWDM SFP 1558.17 nm SFP (100 GHz ITU grid) |
DWDM-SFP-5898= |
DWDM SFP 1558.98 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-5979= |
DWDM SFP 1559.79 nm SFP (BUILD-TO-ORDER) |
DWDM-SFP-6061= |
DWDM SFP 1560.61 nm SFP (100 GHz ITU grid) |
DWDM-SFP-6141= |
DWDM SFP 1561.42 nm SFP (100 GHz ITU grid) |
There is no replacement available for the Cisco DWDM-SFP-XXXX (1G DWDM Transceiver Modules) at this time.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at: https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco DWDM-SFP-XXXX (1G DWDM Transceiver Modules) through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: https://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/c/en/us/products/eos-eol-policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/c/en/us/products/warranty-listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://cway.cisco.com/mynotifications.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.