The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL12141 - Amended
Cisco announces the end-of-sale and end-of-life dates for the Cisco 1941 and 1921 Integrated Services Routers. The last day to order the affected product(s) is September 29, 2018. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-Life Milestones and Dates for the Cisco 1941 and 1921 Integrated Services Routers
| Milestone |
Definition |
Date |
| End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
March 31, 2018 |
| End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
September 29, 2018 |
| Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
December 28, 2018 |
| End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
September 29, 2019 |
| End of Vulnerability/Security Support: |
The last date that Cisco Engineering may release a planned maintenance release or scheduled software remedy for a security vulnerability issue. |
September 28, 2021 |
| End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
September 29, 2019 |
| End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
September 29, 2019 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
December 25, 2022 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
September 30, 2023 |
Note: All Refurbished Product Part Numbers associated with the below table are affected by this announcement
Table 2. Product Part Numbers Affected by This Announcement
| End-of-Sale Product Part Number |
Product Description |
Replacement Product Part Number |
Replacement Product Description |
Additional Information |
| C1-CISCO1921/K9 |
Cisco ONE - ISR 1921 |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| C1-CISCO1921/K9 |
Cisco ONE - ISR 1921 |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| C1-CISCO1941/K9 |
Cisco ONE - ISR 1941 |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| C1-CISCO1941/K9 |
Cisco ONE - ISR 1941 |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| C1921-4SHDSL-EA/K9 |
Cisco 1921 4pair Double Wide EHWIC-4SHDSL-EA bundle, IP Base |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| C1921-4SHDSL-EA/K9 |
Cisco 1921 4pair Double Wide EHWIC-4SHDSL-EA bundle, IP Base |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| C1921-AX/K9 |
Cisco 1921 AX Bundle w/ APP,SEC lic |
ISR4221-AX/K9 |
Cisco ISR 4221 AX Bundle w/APP, SEC lic |
- |
| C1921-AX/K9 |
Cisco 1921 AX Bundle w/ APP,SEC lic |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| C1921-HW/K9 |
Cisco 1921 Hardware Only Bundle |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| C1921-HW/K9 |
Cisco 1921 Hardware Only Bundle |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| C1921-VA/K9 |
Cisco 1921 ISR with EHWIC-VA-DSL-A bundle |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| C1921VAM/K9 |
Cisco 1921 ISR with Multimode EHWIC for VDSL/ADSL2+ Annex M |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| C1941-AX/K9 |
Cisco 1941 AX Bundle w/ APP,SEC lic |
ISR4221-AX/K9 |
Cisco ISR 4221 AX Bundle w/APP, SEC lic |
- |
| C1941-AX/K9 |
Cisco 1941 AX Bundle w/ APP,SEC lic |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| C1941-AXI/K9 |
Cisco 1941 AX India Bundle w/APP, SEC license |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| C1941-HW/K9 |
Cisco 1941 Hardware Only Bundle |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| C1941-HW/K9 |
Cisco 1941 Hardware Only Bundle |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| CISCO1921-IB/K9 |
Cisco1921/K9 w/ IP Business,2 GE,512MB DRAM |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1921-MS/K9 |
Cisco 1921 T1 bundle, incl HWIC-1DSU-T1, 256F/512D, IP Base |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1921-SEC/K9 |
Cisco1921/K9 with 2GE, SEC License PAK, 512MB DRAM, 256MB Fl |
ISR4221-SEC/K9 |
Cisco ISR 4221 SEC Bundle with SEC lic |
- |
| CISCO1921-SEC/K9 |
Cisco1921/K9 with 2GE, SEC License PAK, 512MB DRAM, 256MB Fl |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| CISCO1921-SEC/K9++ |
Cisco1921/K9 with 2GE, SEC License PAK, 512MB DRAM, 256MB Fl |
ISR4221-SEC/K9 |
Cisco ISR 4221 SEC Bundle with SEC lic |
- |
| CISCO1921-SEC/K9++ |
Cisco1921/K9 with 2GE, SEC License PAK, 512MB DRAM, 256MB Fl |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| CISCO1921-T1SEC/K9 |
Cisco 1921 T1 Bundle incl. HWIC-1DSU-T1,256F/512D, SEC Lic |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1921/K9 |
C1921 Modular Router, 2 GE, 2 EHWIC slots, 512DRAM, IP Base |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1921/K9 |
C1921 Modular Router, 2 GE, 2 EHWIC slots, 512DRAM, IP Base |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| CISCO1921DC/K9 |
C1921 Modular Router DC Power,2GE,2EHWICslots,512MB, IP Base |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1941-2.5G/K9 |
Cisco 1941 with 2.5G DRAM, 256MB Flash |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1941-2.5G/K9 |
Cisco 1941 with 2.5G DRAM, 256MB Flash |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| CISCO1941-HSEC+/K9 |
VPN ISM module HSEC bundles for 1941 ISR platform |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1941-HSEC+/K9 |
VPN ISM module HSEC bundles for 1941 ISR platform |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| CISCO1941-HSEC/K9 |
HSEC bundle (no ISM VPN module) for 1941 ISR platform |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1941-HSEC/K9 |
HSEC bundle (no ISM VPN module) for 1941 ISR platform |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| CISCO1941-IB/K9 |
Cisco 1941 w/ IP Business,2 GE,2 EHWIC slots,512MB DRAM |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1941-SEC/K9 |
Cisco 1941 Security Bundle w/SEC license PAK |
ISR4221-SEC/K9 |
Cisco ISR 4221 SEC Bundle with SEC lic |
- |
| CISCO1941-SEC/K9 |
Cisco 1941 Security Bundle w/SEC license PAK |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| CISCO1941/K9 |
Cisco 1941 w/2 GE,2 EHWIC slots,256MB CF,512MB DRAM,IP Base |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1941/K9 |
Cisco 1941 w/2 GE,2 EHWIC slots,256MB CF,512MB DRAM,IP Base |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
| CISCO1941/K9++ |
Cisco 1941 w/2 GE,2 EHWIC slots,256MB CF,512MB DRAM,IP Base |
ISR4221/K9 |
Cisco ISR 4221 (2GE,2NIM,8G FLASH,4G DRAM,IPB) |
- |
| CISCO1941/K9++ |
Cisco 1941 w/2 GE,2 EHWIC slots,256MB CF,512MB DRAM,IP Base |
C1111-8P |
ISR 1100 8 Ports Dual GE WAN Ethernet Router |
- |
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at: https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco 1941 and 1921 Integrated Services Routers through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: https://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://www.cisco.com/cisco/support/notifications.html.
Subscribe for RSS notifications for end-of-life and end-of-sale notices
To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: https://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.