Cisco RP Series Basic Power Distribution Units Data Sheet
Available Languages
Product Overview
With data center devices denser than ever - often served by two, three, or even four power supplies - a single rack of equipment can produce dozens of power cords to manage. The demands of even one rack can easily exceed the available supply of wall outlets. Even if power drops are run from a nearby rack power module, a common scenario, the cabling into each rack can quickly become unwieldy to manage and difficult to trace and troubleshoot.
Cisco® RP Series Power Distribution Units (PDUs) are ideal choice for a flexible, reliable, easy-to-deploy power distribution with branch circuit protection. In addition, Cisco offers a complete line of computing, rack, and power products optimized and certified for Cisco Unified Computing System™ blade and rack servers.
Features and Benefits
Table 1 summarizes the features and benefits of the Cisco RP Series PDUs.
Table 1. Features and Benefits
| Feature |
Benefit |
| Provides a better way to distribute power |
● Cisco RP Series PDU models cost effectively and efficiently distribute power to up to 24 outlets.
● The ready-to-use architecture organizes power distribution, simplifies cable management, and enables you to move, add, and change rack equipment without an electrician.
|
| Streamlines cabling from the rack |
● With a Cisco RP Series PDU in the rack, you can replace up to two dozen input power cords with just one.
● The fixed input cord connects to the power source from overhead or under-floor distribution. Your IT equipment is then powered by PDU outlets in the rack using short, easy-to-manage power cords.
● With far fewer cables between the power source and the rack, these PDUs alleviate clutter, improve airflow, and simplify power distribution.
|
| Enables easy deployment of PDUs |
● Lightweight Cisco RP Series PDU models are easy to install and display.
● Zero-rack-unit (0RU) and 1RU designs preserve valuable rack space for IT equipment.
|
| Protects against overload conditions |
● Cisco RP Series PDU models provide two 20-ampere (A) circuit breakers for groups of receptacles. The effects of a tripped circuit are limited to a receptacle group. Simply press a button to reset that circuit.
|
| Certified to operate with Cisco equipment |
● Designed, tested, and approved for use with Cisco solutions, budget-friendly Cisco PDUs can extend the value of your existing power systems while improving system reliability and availability.
|
Product Specifications
Table 2 summarizes the specifications for the Cisco RP Series PDUs.
Table 2. Product Specifications
| Description |
0RU Strip PDU 20 C13 and 4 C19, Single-Phase, NA, 30A, Fixed 10ft L6-30P |
1RU PDU 2 C13 and 4 C19, Single-Phase, NA, 30A, Fixed 10ft L6-30P |
0RU Strip PDU 20 C13 and 4 C19, Single-Phase, 30A, Fixed 3M IEC309 32A 2P+E |
1RU PDU 2 C13 and 4 C19, Single-Phase, NA, 30A, Fixed 3M IEC309 32A 2P+E |
| Cisco option part number |
RP208-30-1P-U-2 |
RP208-30-1P-U-1 |
RP230-32-1P-U-2 |
RP230-32-1P-U-1 |
| Cisco field-replaceable unit (FRU) part number |
RP208-30-1P-U-2= |
RP208-30-1P-U-1= |
RP230-32-1P-U-2= |
RP230-32-1P-U-1= |
| RU size |
0 |
0/1 |
0 |
0/1 |
| Input voltage |
200 to 240 VAC ±10% |
200 to 240 VAC ±10% |
200 to 240 VAC ±10% |
200 to 240 VAC ±10% |
| Frequency |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
50 to 60 Hz |
| Amperage |
30A |
30A |
32A |
32A |
| UL rating |
24A |
24A |
32A |
32A |
| Input plug |
NEMA L6-30P |
NEMA L6-30P |
IEC309 32A 2P+E |
IEC309 32A 2P+E |
| Cord length |
10ft/3m |
|
||
| Output voltage |
200 to 240 VAC |
|
||
| Receptacles |
● 20 IEC 320 C13
● 4 IEC 320 C19
|
● 2 IEC 320 C13
● 4 IEC 320 C19
|
● 20 IEC 320 C13
● 4 IEC 320 C19
|
● 2 IEC 320 C13
● 4 IEC 320 C19
|
| Circuit breakers |
2 two-pole 20A (UL 489) |
|||
| Safety and Environmental |
||||
| Operating temperature |
50 to 122°F (10 to 50°C) |
|||
| Operating relative humidity |
5 to 90% (noncondensing) |
|||
| Operating elevation |
0 to 10,000 ft (0 to 3048m) |
|||
| Storage temperature |
-40 to 140°F (-40 to 60°C) |
|||
| Storage relative humidity |
5 to 95% (including condensing) |
|||
| Storage elevation |
0 to 50,000 ft (0 to 15,240m) |
|||
| Cooling |
No fan required to meet agency and performance requirements |
|||
| Safety |
||||
| Unit dimensions |
60.6 x 17.4 x 3.4 in. (1540 x 44 x 85 mm) |
17.6 x 13.8 x 18 (447 x 350 x 43.4 mm) |
1540 x 44 x 85 mm |
447 x 350 x 43.4 mm |
| Unit weight (kg) |
12.1 lb (5.5 kg) |
11.1 lb (5 kg) |
5.5 kg |
5 kg |
| Packaging size |
67.7 x 6.7 x 6.7 in. (1720 x 170 x 170 mm) |
19.5 x 22.3 x 7.1 in. (495 x 565 x 180 mm) |
1720 x 170 x 170 mm |
495 x 565 x 180 mm |
| Total weight with packaging |
15.5 lb (7 kg) |
18.3 lb (8.3 kg) |
7 kg |
8.3 kg |
Warranty Information
Find warranty information on Cisco.com at the Product Warranties page.
Ordering Information
To place an order, visit the Cisco Ordering homepage.
Cisco Services
Cisco Services make networks, applications, and the people who use them work better together.
Today, the network is a strategic platform in a world that demands better integration between people, information, and ideas. The network works better when services, together with products, create solutions aligned with business needs and opportunities.
The unique Cisco Lifecycle approach to services defines the requisite activities at each phase of the network lifecycle to help ensure service excellence. With a collaborative delivery methodology that joins the forces of Cisco, our skilled network of partners, and our customers, we achieve the best results.
Cisco Capital
Financing to Help You Achieve Your Objectives
Cisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. We can help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment. And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.
For More Information
Feedback