Cisco Catalyst 9130AX Series Access Points Data Sheet

Wi-Fi 6 (802.11ax)

The IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. Wi-Fi 6 is designed to use both the 2.4-GHz and 5-GHz bands, unlike the 802.11ac standard.

Cisco RF ASIC

The Cisco RF Application-Specific Integrated Circuit (ASIC) is a fully integrated Software-Defined Radio (SDR) that can perform advanced RF spectrum analysis and delivers features such as Cisco CleanAir, Wireless Intrusion Prevention System (WIPS), FastLocate, and Dynamic Frequency Selection (DFS) detection.

Uplink/downlink OFDMA

Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.

Uplink/downlink MU‑MIMO technology

Supporting eight spatial streams, Multiuser Multiple Input, Multiple Output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput.

BSS coloring

Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.

Target Wake Time

A new power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point. This offers significant energy savings for battery-operated devices, up to three to four times the savings achieved by 802.11n and 802.11ac.

Intelligent Capture

Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis. The software can track more than 240 anomalies and instantaneously review all packets on demand, emulating the onsite network administrator. Intelligent Capture allows for more informed decisions on your wireless networks.

Flexible Radio Assignment (FRA) with tri-radio mode

FRA allows the access points to intelligently determine the operating mode of serving radios based on the RF environment and traffic demands. The access points can operate in the following modes:

The access point’s default mode is dual radio with 8x8 5 GHz and 4x4 2.4 GHz. It has the ability to split the 8x8 radio into two separate 4x4 5-GHz radios through software, thereby enabling the benefits of FRA while allowing the 2.4-GHz radio to remain active.

Industry first 8x8 external antenna access point with smart antenna connector

The Cisco Catalyst 9130AX Series Access Points are the first in the industry to provide an 8x8 radio architecture with external antennas. Additionally, these antennas can be split into a dual 4x4 radio architecture. An intelligent physical antenna connector is included on the 9130AX Series with an external antenna. This connector provides advanced network design flexibility for high-density and large open-area environments such as auditoriums, convention centers, libraries, cafeterias, and arenas/stadiums.

Cisco Embedded Wireless Controller (EWC)

An Embedded Wireless Controller on the Catalyst 9130AX access points is designed for networks of all sizes, including small and medium-sized businesses and distributed enterprises. It provides industry-leading wireless LAN technology without the need for a physical wireless controller. For more details refer to the EWC data sheet.

Application Hosting on Catalyst 9100 Access

Application Hosting on Catalyst 9100 Access Points helps future-proof and simplify IoT deployments by eliminating the need to install and manage overlay networks. Utilizing the USB interface, containerized applications and hardware modules can be deployed to reduce cost and complexity. Adding Cisco DNA Center provides workflows and deployment-wide application lifecycle management.

Multigigabit Ethernet support

Multigigabit Ethernet provides uplink speeds of 5 Gbps and 2.5 Gbps, in addition to 100 Mbps and 1 Gbps. All speeds are supported on Category 5e cabling, as well as 10GBASE-T (IEEE 802.3bz) cabling.

Bluetooth 5

Integrated Bluetooth Low Energy (BLE) 5 radio enables location-based use cases such as asset tracking, wayfinding, and analytics.

Container support for applications

Container support enables edge computing capabilities for IoT applications on the host access point.

Apple features

Apple and Cisco have partnered to create an optimal mobile experience for iOS devices on corporate networks based on Cisco technologies. Using new features in Apple iOS, in combination with the latest software and hardware from Cisco, businesses can now more effectively use their network infrastructure to deliver an enhanced user experience across all business applications.

At the center of the collaboration is a unique handshake between the Cisco WLAN and Apple devices. This handshake enables the Cisco WLAN to provide an optimal Wi-Fi roaming experience to Apple devices. Additionally, the Cisco WLAN trusts Apple devices and gives priority treatment for business-critical applications specified by the Apple device. This feature is also known as Fast Lane.

Part numbers

Cisco Catalyst 9130AXI Access Point: Indoor environments, with internal antennas

Cisco Catalyst 9130AXE Access Point: Challenging indoor environments, with external antennas

Cisco Catalyst 9130AXE-STA Access Point: C9130 AP with C-ANT9104 Stadium antenna

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

Cisco Wireless LAN Services

Software

Catalyst 9130AXI

Catalyst 9130AXE

Cisco Catalyst 9130AXE Stadium Antenna Access Point, external antenna (C-ANT9104)

Supported wireless LAN controllers

802.11n version 2.0 (and related) capabilities

802.11ac

802.11ax

Integrated antenna

External antenna with smart antenna connector

Interfaces

Indicators

Dimensions (W x L x H)

◦      C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)

◦      C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)

◦      C9130AXE-STA: 18.2 X 23.5 X 5.8 in. (59.70 X 46.23 X 14.8 cm)

Weight

Cisco Catalyst 9130AXI

Cisco Catalyst 9130AXE

Cisco Catalyst 9130AXE-STA

Input power requirements

Catalyst 9130AXI

Power source

2.4-GHz radio

5-GHz radio

Link speed

USB

Max PoW Power Consumption

802.3at (PoE+)

4x4

8x8

5G

N

25.5W

802.3at (PoE+)

4x4

4x4

5G

Y [4.5W]

25.5W

802.3bt (Cisco UPOE)

4x4

8x8

5G

Y [4.5W]

30.5W

Cisco Catalyst 9130AXE

Power source

2.4-GHz radio

5-GHz radio

Link speed

USB

Max PoE Power Consumption

802.3at (PoE+)

4x4

8x8

5G

N

25.5W

802.3at (PoE+)

4x4

4x4

5G

Y [4.5W]

25.5W

802.3bt (Cisco UPOE)

4x4

8x8

5G

Y [4.5W]

30.5W

Cisco Catalyst 9130AXI and 9130AXE

Power source

2.4-GHz radio

5-GHz radio

Link speed

USB

Max PoE Power Consumption

802.3af

PoE

1x1

1x1

1G

N

13.4W

Note:    Actual power consumption may very depending on AP usage. It is recommended that you ensure that LLDP/CDP is enabled to allow proper power negotiation.

Environmental

Cisco Catalyst 9130AXI

Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 8x8 to 4x4 on the 5 GHz radio, uplink Ethernet will downgrade to 1 Gigabit Ethernet; however, the USB interface will remain enabled.

Cisco Catalyst 9130AXE

System memory

Warranty

Limited lifetime hardware warranty

Available transmit power settings

2.4 GHz

5 GHz

Regulatory domains

Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.

Compliance standards

◦      IEC 60950-1

◦      EN 60950-1

◦      UL 60950-1

◦      CAN/CSA-C22.2 No. 60950-1

◦      AS/NZS60950.1

◦      UL 2043

◦      Class III equipment

◦      CISPR 32 (rev. 2015)

◦      EN 55032 (rev. 2012/AC:2013)

◦      EN 55032 (rev. 2015)

◦      EN61000-3-2 (rev. 2014)

◦      EN61000-3-3 (rev. 2013)

◦      KN61000-3-2

◦      KN61000-3-3

◦      AS/NZS CISPR 32 Class B (rev. 2015)

◦      47 CFR FCC Part 15B

◦      ICES-003 (rev. 2016 Issue 6, Class B)

◦      VCCI-CISPR 32

◦      CNS (rev. 13438)

◦      KN-32

◦      QCVN 118:2018/BTTTT

◦      CISPR 24 (rev. 2010)

◦      EN 55024 + AMD 1(rev. 2010)

◦      EN 55035: 2017

◦      KN35

◦      EN 301 489-1 (v2.1.1 2017-02)

◦      EN 301 489-17 (v3.1.1 2017-02)

◦      QCVN (18:2014)

◦      QCVN 112:2017/BTTTT

◦      KN 489-1

◦      KN 489-17

◦      EN 60601-1-2:2015

◦      EN 61000-6-1: 2007

◦      EN 300 328 (v2.1.1)

◦      EN 301 893 (v2.1.1)

◦      AS/NZS 4268 (rev. 2017)

◦      47 CFR FCC Part 15C, 15.247, 15.407

◦      RSP-100

◦      RSS-GEN

◦      RSS-247

◦      China regulations SRRC

◦      LP0002 (rev 2018.1.10)

◦      Japan Std. 33a, Std. 66, and Std. 71

◦      EN 50385 (rev. Aug 2002)

◦      ARPANSA

◦      AS/NZS 2772 (rev. 2016)

◦      EN 62209-1 (rev. 2016)

◦      EN 62209-2 (rev. 2010)

◦      47 CFR Part 1.1310 and 2.1091

◦      RSS-102

◦      IEEE 802.3

◦      IEEE 802.3ab

◦      IEEE 802.3af/at

◦      IEEE 802.11a/b/g/n/ac/ax

◦      IEEE 802.11h, 802.11d

◦      802.11i, (WPA2, WPA3

◦      802.1X

◦      Advanced Encryption Standard (AES)

◦      EAP-Transport Layer Security (TLS)

◦      EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2

◦      Protected EAP (PEAP) v0 or EAP-MSCHAP v2

◦      EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

◦      PEAP v1 or EAP-Generic Token Card (GTC)

◦      EAP-Subscriber Identity Module (SIM)

Data rate, transmit power, receive sensitivity

For more detailed information about data rate, transmit power, and receive sensitivity, please refer to the Cisco RF details.

Transmit (Tx) power and receive (Rx) sensitivity

5-GHz primary radio

5-GHz secondary radio

2.4-GHz radio

Spatial streams

Number of active antennas

Total Tx power (dBm)

Rx sensitivity (dBm)

Total Tx power (dBm)

Rx sensitivity (dBm)

Total Tx power (dBm)

Rx sensitivity (dBm)

802.11/11b

1 Mbps

1

4

–

–

–

–

23

-104

11 Mbps

1

4

–

–

–

–

23

-96

802.11a/g

6 Mbps

1

4

23

-100

23

-99

23

-98

24 Mbps

1

4

22

-92

22

-92

22

-91

54 Mbps

1

4

21

-84

21

-83

20

-82

802.11n HT20

MCS0

1

4

23

-99

23

-99

23

-98

MCS31

4

4

20

-77

20

-77

20

-75

802.11n HT40

MCS0

1

4

23

-96

23

-96

–

–

MCS31

4

4

20

-75

20

-75

–

–

802.11ac VHT20

MCS0

1

4

23

-100

23

-99

–

–

MCS9

4

4

–

–

–

–

–

–

MCS0

1

8

26

-102

–

–

–

MCS8

8

8

23

-73

–

–

–

MCS9

8

8

–

–

–

–

–

802.11ac VHT40

MCS0

1

4

23

-96

23

-96

–

–

MCS9

4

4

19

-69

19

-69

–

–

MCS0

1

8

26

-99

–

–

–

MCS9

8

8

22

-69

–

–

–

802.11ac VHT80

MCS0

1

4

23

-93

23

-93

–

–

MCS9

4

4

19

-65

19

-64

–

–

MCS0

1

8

26

-95

–

–

–

MCS9

8

8

22

-65

–

–

–

802.11ac VHT160

MCS0

1

4

26

-89

–

–

–

MCS9

4

4

21

-61

–

–

–

802.11ax HE20

MCS0

1

4

23

-99

23

-99

23

-98

MCS11

4

4

18

-66

18

-66

17

-65

MCS0

1

8

26

-102

–

–

–

MCS11

8

8

21

-65

–

–

–

802.11ax HE40

MCS0

1

4

23

-96

23

-96

–

–

MCS11

4

4

18

-63

18

-62

–

–

MCS0

1

8

26

-99

–

–

–

MCS11

8

8

21

-63

–

–

–

802.11ax HE80

MCS0

1

4

23

-93

23

-93

–

–

MCS11

4

4

17

-59

17

-59

–

–

MCS0

1

8

26

-96

–

–

–

MCS11

8

8

20

-59

–

–

–

802.11ax HE160

MCS0

1

4

26

-88

–

–

–

MCS11

4

4

19

-56

–

–

–

Cisco DNA Spaces name change

Updated product name to Cisco Spaces

Oct 18, 2022