Tidal Enterprise Scheduler: Find the Master, Client, and Agent Versions in the Client

Available Languages

Download Options

  • PDF     (60.6 KB)
    View with Adobe Reader on a variety of devices
Updated:July 22, 2011
Document ID:113109

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document provides instructions on how to find the Master, Client, and Agent versions in the Tidal Enterprise Scheduler (TES) Client.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on the Tidal Enterprise Scheduler.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Find the Master, Client, and Agent Versions in the TES Client

TES 5.x

In version 5.x of TES, the Master and Agent versions for either Windows or Unix can be determined with this procedure. Complete these steps:

  1. Open the Client.

  2. Then open the Administration menu item and choose Connections. The Master and Agent versions are in the Version column header on the appropriate line.

    tes-find-versions-client-01.gif

  3. The Client version can be found in similar fashion. Choose Operations > Master Status. The version for each connected Client is under the Client Version column header.

    tes-find-versions-client-02.gif

TES 6.x

In version 6.x of TES, the Master and Agent versions can be determined with this procedure. Complete these steps.

  1. Login to the Web interface.

  2. Choose Connections in the Administration menu item. The Master and Agent versions are in the Version column header on the appropriate line.

    tes-find-versions-client-03.gif

  3. Choose Operations > Master Status menu item in order to determine the Client through the web interface.

    tes-find-versions-client-04.gif

Related Information

Was this Document Helpful?

FeedbackFeedback

Contact Cisco