Tidal Enterprise Scheduler: OS/400 Job Completes with "Output not available/not found" Error

Available Languages

Download Options

PDF (5.8 KB)
View with Adobe Reader on a variety of devices

Updated:June 6, 2012

Document ID:113413

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

Prerequisites

Requirements

Components Used

Conventions

Problem

Solution

Related Information

Introduction

This document describes a problem with Cisco Tidal Enterprise Scheduler (TES) OS/400 Adapter that does not capture the job output.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

Cisco Tidal Enterprise Scheduler
OS/400 Adapter

Components Used

The information in this document is based on the Cisco Tidal Enterprise Scheduler versions 5.3.1 or later.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.