-
Microsoft announced seven security bulletins that address 12 vulnerabilities as part of the monthly security bulletin release on January 8, 2013. A summary of these bulletins is on the Microsoft website at http://technet.microsoft.com/en-us/security/bulletin/ms13-jan. This document provides identification and mitigation techniques that administrators can deploy on Cisco network devices.
The vulnerabilities that require user interaction, or can be exploited locally on the vulnerable device, or can be exploited using web-based attacks (these include but are not limited to cross-site scripting, phishing, and web-based e-mail threats) or e-mail attachments are in the following list:
The vulnerability that has a network mitigation is MS13-004. Cisco devices provide several countermeasures for the vulnerability that has a network attack vector, which will be discussed in detail later in this document.
This document will not provide protection guidance for vulnerabilities MS13-001 and MS13-006.
Information about affected and unaffected products is available in the respective Microsoft advisories and the Cisco Alerts that are referenced in Cisco Event Response: Microsoft Security Bulletin Release for January 2013.
In addition, multiple Cisco products use Microsoft operating systems as their base operating system. Cisco products that may be affected by the vulnerabilities described in the referenced Microsoft advisories are detailed in the "Associated Products" table in the "Product Sets" section.
-
MS13-004, Vulnerability in .NET Framework Could Allow Elevation of Privilege (2769324): This vulnerabilities have been assigned Common Vulnerabilities and Exposures (CVE) identifiers CVE-2013-0001, CVE-2013-0002, CVE-2013-0003 and CVE-2013-0004. These vulnerabilities can be exploited remotely without authentication and require user interaction.
Successful exploitation of the vulnerability that is associated with CVE-2013-0001 may allow information disclosure, which enables an attacker to learn information about the affected device. Successful exploitation of the vulnerabilities that are associated with CVE-2013-0002 and CVE-2013-0003 may allow arbitrary code execution. Successful exploitation of the vulnerability that is associated with CVE-2013-0004 may allow elevation of privilege. The attack vector for exploitation of these vulnerabilities is through HTTP packets that typically use TCP port 80 but may also use TCP ports 3128, 8000, 8010, 8080, 8888, and 24326.
The Cisco ASA 5500 Series Adaptive Security Appliance, the Cisco Catalyst 6500 Series ASA Services Module (ASASM), the Cisco Firewall Services Module (FWSM) for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, and the Cisco ACE Application Control Engine Appliance and Module provide protection for potential attempts to exploit these vulnerabilities (a topic that is included in this document). Cross-site scripting and phishing could also be used to exploit these vulnerabilities.
-
Information about vulnerable, unaffected, and fixed software is available in the Microsoft Security Bulletin Summary for January 2013, which is available at the following link: http://technet.microsoft.com/en-us/security/bulletin/ms13-jan
-
The vulnerabilities that require user interaction, or can be exploited locally on the vulnerable device, or can be exploited using web-based attacks (these include but are not limited to cross-site scripting, phishing, and web-based e-mail threats) or e-mail attachments are in the following list:
These vulnerabilities are mitigated most successfully at the endpoint through software updates, user education, desktop administration best practices, and endpoint protection software such as Cisco Security Agent Host Intrusion Prevention System (HIPS) or antivirus products.
The vulnerability that has a network mitigation is MS13-004. Cisco devices provide several countermeasures this vulnerability. This section of the document provides an overview of these techniques.
This document will not provide protection guidance for vulnerabilities MS13-001 and MS13-006.
Effective exploit prevention can be provided by the Cisco ASA 5500 Series Adaptive Security Appliance, Cisco Catalyst 6500 Series ASA Services Module (ASASM), and the Firewall Services Module (FWSM) for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers using Application layer protocol inspection.
This protection mechanism filters and drops packets that are attempting to exploit the vulnerability that has a network attack vector.
Effective exploit prevention can also be provided by the Cisco ACE Application Control Engine Appliance and Module using application protocol inspection.
Cisco ASA, Cisco ASASM, Cisco FWSM firewalls, and Cisco ACE Application Control Engine Appliance and Module can provide visibility through syslog messages and counter values displayed in the output from show commands.
Effective use of Cisco Intrusion Prevention System (IPS) event actions provides visibility into and protection against attacks that attempt to exploit these vulnerabilities as discussed later in this document.The Cisco Security Manager can also provide visibility through incidents, queries, and event reporting.
-
Organizations are advised to follow their standard risk evaluation and mitigation processes to determine the potential impact of these vulnerabilities. Triage refers to sorting projects and prioritizing efforts that are most likely to be successful. Cisco has provided documents that can help organizations develop a risk-based triage capability for their information security teams. Risk Triage for Security Vulnerability Announcements and Risk Triage and Prototyping can help organizations develop repeatable security evaluation and response processes.
-
Device-Specific Mitigation and Identification
Caution: The effectiveness of any mitigation technique depends on specific customer situations such as product mix, network topology, traffic behavior, and organizational mission. As with any configuration change, evaluate the impact of this configuration prior to applying the change.
Specific information about mitigation and identification is available for these devices:
- Cisco ASA, Cisco ASASM, and Cisco FWSM Firewalls
- Cisco ACE
- Cisco Intrusion Prevention System
- Cisco Security Manager
Cisco ASA, Cisco ASASM, and Cisco FWSM Firewalls
Mitigation: Application Layer Protocol Inspection
Application layer protocol inspection is available beginning in software release 7.2(1) for the Cisco ASA 5500 Series Adaptive Security Appliance, software release 8.5 for the Cisco Catalyst 6500 Series ASA Services Module, and in software release 4.0(1) for the Cisco Firewall Services Module. This advanced security feature performs deep packet inspection of traffic that transits the firewall. Administrators may construct an inspection policy for applications that require special handling through the configuration of inspection class maps and inspection policy maps, which are applied by means of a global or interface service policy.
Additional information about application layer protocol inspection is in the Configuring Application Layer Protocol Inspection section of the Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2 and the Configuring Application Inspection section of the Cisco Catalyst 6500 Series ASA Services Module CLI Configuration Guide, 8.5.
Caution: Application layer protocol inspection will decrease firewall performance. Administrators are advised to test performance impact in a lab environment before this feature is deployed in production environments.
HTTP Application Inspection
For MS13-004, by using the HTTP inspection engine on the Cisco ASA 5500 Series Adaptive Security Appliances, Cisco 6500 Series ASA Services Modules, and the Cisco Firewall Services Module, administrators can configure regular expressions (regexes) for pattern matching and construct inspection class maps and inspection policy maps. These methods can help protect against specific vulnerabilities, such as the one described in this document, and other threats that may be associated with HTTP traffic. The following HTTP application inspection configuration uses the Cisco Modular Policy Framework (MPF) to create a policy for inspection of traffic on TCP ports 80, 3128, 8000, 8010, 8080, 8888, and 24326, which are the default ports for the Cisco IPS #WEBPORTS variable. The HTTP application inspection policy will drop connections where the HTTP response body contains any of the regexes that are configured to match the ActiveX control that is associated with these vulnerabilities.Caution: The configured regexes can match text strings at any location in the body of an HTML response. Care should be taken to ensure that legitimate business applications that use matching text strings without calling the ActiveX control are not affected. Additional information about regex syntax is in Creating a Regular Expression.
Additional information about ActiveX exploits and mitigations that leverage Cisco firewall technologies is available in the Preventing ActiveX Exploits with Cisco Firewall Application Layer Protocol Inspection Cisco Security white paper.
! !-- Configure regex for matching !-- XAML Browser files (xbap) or !-- XAML Browser application type application/xaml+xml ! regex MS13_004_1_regex "\.[Xx][Bb][Aa][Pp]" regex MS13_004_2_regex "application\x2f[Xx][Aa][Mm][Ll]\x2b [Xx][Mm][Ll]" ! !-- Configure regex classes to match on the regular !-- expressions that are configured above ! class-map type regex match-any MS13_004_regex_class match regex MS13_004_1_regex match regex MS13_004_2_regex ! !-- Configure an object group for the default ports that !-- are used by the Cisco IPS #WEBPORTS variable, which !-- are TCP ports 80 (www), 3128, 8000, 8010, 8080, 8888, !-- and 24326 ! object-group service WEBPORTS tcp port-object eq www port-object eq 3128 port-object eq 8000 port-object eq 8010 port-object eq 8080 port-object eq 8888 port-object eq 24326 ! !-- Configure an access list that uses the WEBPORTS object !-- group, which will be used to match TCP packets that !-- are destined to the #WEBPORTS variable that is used !-- by a Cisco IPS device ! access-list Webports_ACL extended permit tcp any any object-group WEBPORTS ! !-- Configure a class that uses the above-configured !-- access list to match TCP packets that are destined !-- to the ports that are used by the Cisco IPS #WEBPORTS !-- variable ! class-map Webports_Class match access-list Webports_ACL ! !-- Configure an HTTP application inspection policy that !-- identifies, drops, and logs connections that contain !-- the regexes that are configured above ! policy-map type inspect http MS_Jan_2013_policy parameters ! !-- "body-match-maximum" indicates the maximum number of !-- characters in the body of an HTTP message that !-- should be searched in a body match. The default value is !-- 200 bytes. A large number such as shown here may have an !-- impact on system performance. Administrators are advised !-- to test performance impact in a lab environment before !-- this command is deployed in production environments ! body-match-maximum 1380 match response body regex class MS13_004_regex_class drop-connection log ! !-- Add the above-configured "Webports_Class" that matches !-- TCP packets that are destined to the default ports !-- that are used by the Cisco IPS #WEBPORTS variable to !-- the default policy "global_policy" and use it to !-- inspect HTTP traffic that transits the firewall ! policy-map global_policy class Webports_Class inspect http MS_Jan_2013_policy ! !-- By default, the policy "global_policy" is applied !-- globally, which results in the inspection of !-- traffic that enters the firewall from all interfaces ! service-policy global_policy global
For additional information about the configuration and use of object groups, reference the Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2 for Configuring Object Groups and the Configuring Objects and Access Lists section of the Cisco Catalyst 6500 Series ASA Services Module CLI Configuration Guide, 8.5.
Additional information about HTTP application inspection and the MPF is in the HTTP Inspection Overview section of the Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2.
Identification: Application Layer Protocol Inspection
Firewall syslog message 415007 will be generated when an HTTP message body matches a user-defined regular expression. The syslog message will identify the corresponding HTTP class and HTTP policy and indicate the action applied to the HTTP connection. Additional information about this syslog message is in Cisco ASA 5500 Series System Log Message, 8.2 - 415007.
Information about configuring syslog for the Cisco ASA 5500 Series Adaptive Security Appliance is in Monitoring - Configuring Logging. Information about configuring syslog for the Cisco Catalyst 6500 Series ASA Services Module is in Configuring Logging. Information about configuring syslog on the FWSM for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers is in Monitoring the Firewall Services Module.
In the following example, the show logging | grep regex command extracts syslog messages from the logging buffer on the firewall. These messages provide additional information about denied packets that could indicate attempts to exploit these vulnerabilities. Administrators can use different regular expressions with the grep keyword to search for specific data in the logged messages.
Additional information about regular expression syntax is in Creating a Regular Expression.
HTTP Application Inspection
firewall#show logging | grep 415007
Jan 08 2013 14:35:54: %ASA-5-415007: HTTP - matched Class 22: match response body regex class MS13_004_regex_class in policy-map MS_Jan_2013_policy, Body matched - Dropping connection from inside:192.168.60.85/2130 to outside:192.0.2.63/80With HTTP application inspection enabled, the show service-policy inspect protocol command will identify the number of HTTP packets that are inspected and dropped by this feature. The following example shows output for show service-policy inspect http:
firewall# show service-policy inspect http Global policy: Service-policy: global_policy Class-map: inspection_default Class-map: Webports_Class Inspect: http MS_Jan_2013_policy, packet 5025, drop 13, reset-drop 0 protocol violations packet 0 match response body regex class MS13_004_regex_class drop-connection log, packet 13
In the preceding example, 5025 HTTP packets have been inspected and 13 HTTP packets have been dropped.
Cisco ACE
Mitigation: Application Protocol Inspection
Application protocol inspection is available for the Cisco ACE Application Control Engine Appliance and Module. This advanced security feature performs deep packet inspection of traffic that transits the Cisco ACE device. Administrators can construct an inspection policy for applications that require special handling through the configuration of inspection class maps and inspection policy maps, which are applied via a global or interface service policy.
Additional information about application protocol inspection is in the Configuring Application Protocol Inspection section of the Cisco ACE 4700 Series Appliance Security Configuration Guide.
HTTP Deep Packet Inspection
To conduct HTTP deep packet inspection for MS13-004, administrators can configure regular expressions (regexes) for pattern matching and construct inspection class maps and inspection policy maps. These methods can help protect against specific vulnerabilities, such as the one described in this document, and other threats that may be associated with HTTP traffic. The following HTTP application protocol inspection configuration inspects traffic on TCP ports 80, 3128, 8000, 8010, 8080, 8888, and 24326, which are the default ports for the Cisco IPS #WEBPORTS variable. The HTTP application protocol inspection policy will drop connections where the HTTP content contains any of the regexes that are configured to match the ActiveX control that is associated with these vulnerabilities.
Caution: The configured regexes can match text strings at any location in the content of an HTML packet. Care should be taken to ensure that legitimate business applications that use matching text strings without calling the ActiveX control are not affected.
Additional information about ActiveX exploits and mitigations that leverage the Cisco ACE Application Control Engine Appliance and Module is available in the Preventing ActiveX Exploits with Cisco Application Control Engine Application Layer Protocol Inspection Cisco Security white paper.
! !-- Configure an HTTP application inspection class that !-- looks for HTTP packets that contain !-- XAML Browser files (xbap) file extensions or !-- XAML Browser application type application/xaml+xml ! class-map type http inspect match-any MS13_004_class match content ".*"\.[Xx][Bb][Aa][Pp].*" match content ".*"\.application\x2f[Xx][Aa][Mm][Ll]\x2b [Xx][Mm][Ll].*" ! !-- Configure an HTTP application inspection policy that !-- identifies, resets, and logs connections that contain !-- the regexes that are configured above ! policy-map type inspect http all-match MS_Jan_2013 class MS13_004_class reset log ! !-- Configure an access list that matches TCP packets !-- that are destined to the #WEBPORTS variable that is !-- used by a Cisco IPS device ! access-list WEBPORTS line 8 extended permit tcp any any eq www access-list WEBPORTS line 16 extended permit tcp any any eq 3128 access-list WEBPORTS line 24 extended permit tcp any any eq 8000 access-list WEBPORTS line 32 extended permit tcp any any eq 8010 access-list WEBPORTS line 40 extended permit tcp any any eq 8080 access-list WEBPORTS line 48 extended permit tcp any any eq 8888 access-list WEBPORTS line 56 extended permit tcp any any eq 24326 ! !-- Configure a Layer 4 class that uses the above-configured !-- access list to match TCP packets that are destined !-- to the ports that are used by the Cisco IPS #WEBPORTS !-- variable ! class-map match-all L4_http_class match access-list WEBPORTS ! !-- Configure a Layer 4 policy that applies the HTTP application !-- inspection policy configured above to TCP packets that !-- are destined to the ports that are used by the Cisco IPS !-- #WEBPORTS variable ! policy-map multi-match L4_MS_Jan_2013 class L4_http_class inspect http policy MS_Jan_2013 ! !-- Apply the configuration globally across all interfaces, !-- which results in the inspection of all traffic that enters !-- the ACE ! service-policy input L4_MS_Jan_2013
Identification: Application Protocol Inspection
HTTP Deep Packet Inspection
Cisco ACE Application Control Engine syslog message 415007 will be generated when an HTTP message body matches a user-defined regular expression. The syslog message will identify the corresponding HTTP class and HTTP policy and indicate the action applied to the HTTP connection. Additional information about this syslog message is in Cisco ACE 4700 Series Appliance System Message Guide - System Message 415007.
ACE/Admin# show logging | include 415007
Jan 08 2013 15:26:43: %ACE-5-415007: HTTP - matched MS13_004_class in policy-map L4_MS_Jan_2013, Body matched - Resetting connection from vlan206:192.0.2.94/80 to vlan130:192.168.60.63/1776 Connection 0x3aWhen HTTP deep packet inspection is enabled, the show service-policy policyname detail command will identify the number of HTTP connections that are inspected and dropped by this feature. The following example shows output for show service-policy L4_MS_Jan_2013 detail:
ACE/Admin# show service-policy L4_MS_Jan_2013 detail Status : ACTIVE
Description: -----------------------------------------
Context Global Policy: service-policy: L4_MS_Jan_2013 class: L4_http_class inspect http: L7 inspect policy : MS_Jan_2013 Url Logging: DISABLED curr conns : 0 , hit count : 1 dropped conns : 0 client pkt count : 3 , client byte count: 589 server pkt count : 3 , server byte count: 547 conn-rate-limit : 0 , drop-count : 0 bandwidth-rate-limit : 0 , drop-count : 0 L4 policy stats: Total Req/Resp: 4 , Total Allowed: 2 Total Dropped : 2 , Total Logged : 0 L7 Inspect policy : MS_Jan_2013 class/match : MS13_004_class Inspect action : reset log Total Inspected : 2 , Total Matched: 1 Total Dropped OnError: 0In the preceding example, 4 HTTP connections have been inspected and 2 HTTP connections have been dropped.
Additional information about HTTP Deep Packet Inspection and Application Protocol Inspection is in the Configuring Application Protocol Inspection section of the Cisco ACE 4700 Series Appliance Security Configuration Guide.Cisco Intrusion Prevention System
Mitigation: Cisco IPS Signature Event Actions
Administrators can use the Cisco IPS appliances and services modules to provide threat detection and help prevent attempts to exploit several of the vulnerabilities described in this document. The following table provides an overview of CVE identifiers and the respective Cisco IPS signatures that will trigger events on potential attempts to exploit these vulnerabilities.
CVE ID Signature Release Signature ID Signature Name Enabled Severity Fidelity* CVE-2013-0010 S687 1790/0 Microsoft System Center Operations Manager Privilege Escalation Yes High 85 CVE-2013-0005 S687 1793/0 Microsoft .NET Framework OData Services Denial of Service Yes Medium 85 CVE-2013-0007 S687 1794/0 Microsoft XML Core Services Vulnerability Yes High 90 * Fidelity is also referred to as Signature Fidelity Rating (SFR) and is the relative measure of the accuracy of the signature (predefined). The value ranges from 0 through 100 and is set by Cisco Systems, Inc.
Administrators can configure Cisco IPS sensors to perform an event action when an attack is detected. The configured event action performs preventive or deterrent controls to help protect against an attack that is attempting to exploit the vulnerabilities listed in the preceding table.
Cisco IPS sensors are most effective when deployed in inline protection mode combined with the use of an event action. Automatic Threat Prevention for Cisco IPS 7.x and 6.x sensors that are deployed in inline protection mode provides threat prevention against an attack that is attempting to exploit the vulnerability that is described in this document. Threat prevention is achieved through a default override that performs an event action for triggered signatures with a riskRatingValue greater than 90.
For additional information about the risk rating and threat rating calculation, reference Risk Rating and Threat Rating: Simplify IPS Policy Management.
Cisco IPS Signature Event Data
The following data has been compiled through remote monitoring services provided by the Cisco Remote Management Services team from a sample group of Cisco IPS sensors running Cisco IPS Signature Update version S687 or greater. The purpose of this data is to provide visibility into attempts to exploit the vulnerabilities released as part of the Microsoft January Security Update released on January 8, 2013. This data was gathered from events triggered on January 22, 2013.
CVE ID Signature ID Percentage of Sensors Reporting the Signature Percentage of Sensors Reporting the Signature Among Top Ten Most-Seen Events CVE-2013-0010 1790/0 0 0 CVE-2013-0005 1793/0 0 0 CVE-2013-0007 1794/0 0 0
Cisco Security Manager
Identification: Cisco Security Manager
Cisco Security Manager, Event Viewer
Beginning in software version 4.0, Cisco Security Manager can collect syslogs from Cisco firewalls and Cisco IPS devices and provides the Event Viewer, which can query for events that are related to the vulnerabilities that are described in this document.
Using the IPS Alert Events predefined view in the Event Viewer, the user can enter the following search strings in the event filter to return all captured events related to Cisco IPS signature.
- 1790/0
- 1793/0
- 1794/0
An Event Type ID filter can be used with the Firewall Denied Events predefined view in the Event Viewer to filter the syslog ID ASA-4-415007 (HTTP inspection) to provide all captured Cisco firewall deny syslog messages that could indicate potential attempts to exploit the vulnerabilities that are described in this document:
For more information about Cisco Security Manager Events, refer to the Filtering and Querying Events section of the Cisco Security Manager User Guide.
Cisco Security Manager Report Manager
Beginning in software version 4.1, Cisco Security Manager supports the Report Manager, the Cisco IPS event reporting feature. This feature allows an administrator to define reports based on Cisco IPS events of interest. Reports can be scheduled or users can run ad hoc reports as required.
Using the Report Manager, the user can define an IPS Top Signatures report for Cisco IPS devices of interest based on time-range and signature characteristics. When the Signature ID is set to
- 1790/0
- 1793/0
- 1794/0
Also in the Report Manager, the Top Services report can be used with the following configuration to generate a report of events that indicate potential attempts to exploit the vulnerabilities that are described in this document:
- Use the Destination IP network filter to filter network objects that contain the IP address space that is used by the affected devices (for example, IPv4 address range 192.168.60.0/24 and IPv6 address range 2001:DB8:1:60::/64)
- Set an action of Deny on the Criteria settings page
For more information about Cisco Security Manager IPS Event Reporting refer to the Understanding IPS Top Reports section of the Cisco Security Manager User Guide.
Identification: Event Management System Partner Events
Cisco works with industry-leading Security Information and Event Management (SIEM) companies through the Cisco Developer Network. This partnership helps Cisco deliver validated and tested SIEM systems that address business concerns such as long-term log archiving and forensics, heterogeneous event correlation, and advanced compliance reporting. Security Information and Event Management partner products can be leveraged to collect events from Cisco devices and then query the collected events for the incidents created by a Cisco IPS signature or deny syslog messages from firewalls that could indicate potential attempts to exploit the vulnerabilities that are described in this document. The queries can be made by Sig ID and Syslog ID as shown in the following list:
- 1790/0 Microsoft System Center Operations Manager Privilege Escalation
- 1793/0 Microsoft .NET Framework OData Services Denial of Service
- 1794/0 Microsoft XML Core Services Vulnerability
- ASA-4-415007 (HTTP inspection)
For more information about SIEM partners, refer to the Security Management System website.
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
-
Version Description Section Date 4 IPS signature event data from Cisco Remote Management Services is available for IPS signatures from January 22, 2013. 2013-January-23 15:30 GMT 3 IPS signature event data from Cisco Remote Management Services is available for IPS signatures from January 15, 2013.
2013-January-16 16:01 GMT 2 IPS signature event data from Cisco Remote Management Services is available for IPS signatures from January 10, 2013.
2013-January-11 15:27 GMT 1 Cisco Applied Mitigation Bulletin initial public release. 2013-January-08 18:44 GMT
-
Complete information on reporting security vulnerabilities in Cisco products, obtaining assistance with security incidents, and registering to receive security information from Cisco, is available on Cisco's worldwide website at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html. This includes instructions for press inquiries regarding Cisco security notices. All Cisco security advisories are available at http://www.cisco.com/go/psirt.
-
The security vulnerability applies to the following combinations of products.
Primary Products Microsoft, Inc. .NET Framework 1.0 (SP3) | 1.1 (SP1) | 2.0 (SP2) | 3.0 (SP2) | 3.5 (Base, SP1) | 3.5.1 (Base) | 4.0 (Base) | 4.5 (Base) Microsoft XML Core Services 3.0 (Base) | 4.0 (Base, SP1, SP2) | 5.0 (Base, SP1) | 6.0 (Base) System Center Operations Manager 2007 (Base, SP1) | 2007 R2 (Base) Windows 7 for 32-bit systems (Base, SP1) | for x64-based systems (Base, SP1) Windows 8 for 32-bit systems (Base) | for x64-based systems (Base) Windows RT Original Release (Base) Windows Server 2008 Datacenter Edition (SP2) | Datacenter Edition, 64-bit (SP2) | Itanium-Based Systems Edition (SP2) | Enterprise Edition (SP2) | Enterprise Edition, 64-bit (SP2) | Essential Business Server Standard (SP2) | Essential Business Server Premium (SP2) | Essential Business Server Premium, 64-bit (SP2) | Standard Edition (SP2) | Standard Edition, 64-bit (SP2) | Web Server (SP2) | Web Server, 64-bit (SP2) Windows Server 2008 R2 x64-Based Systems Edition (Base, SP1) | Itanium-Based Systems Edition (Base, SP1) Windows Server 2012 Original Release (Base) Windows Vista Home Basic (SP2) | Home Premium (SP2) | Business (SP2) | Enterprise (SP2) | Ultimate (SP2) | Home Basic x64 Edition (SP2) | Home Premium x64 Edition (SP2) | Business x64 Edition (SP2) | Enterprise x64 Edition (SP2) | Ultimate x64 Edition (SP2)
Associated Products Cisco Cisco Broadband Troubleshooter Original Release (Base) | 3.1 (Base) | 3.2 (Base) Cisco Building Broadband Service Manager (BBSM) Original Release (Base) | 2.5 (.1) | 3.0 (Base) | 4.0 (Base, .1) | 4.2 (Base) | 4.3 (Base) | 4.4 (Base) | 4.5 (Base) | 5.0 (Base) | 5.1 (Base) | 5.2 (Base) Cisco CNS Network Registrar 2.5 (Base) | 3.0 (Base) | 3.5 (Base, .1) | 5.0 (Base) | 5.5 (Base, .13) | 6.0 (.5, .5.2, .5.3, .5.4) | 6.1 (Base, .1, .1.1, .1.2, .1.3, .1.4) Cisco Collaboration Server Dynamic Content Adapter (DCA) Original Release (Base) | 1.0 (Base) | 2.0 (Base, (1)_SR2) Cisco Computer Telephony Integration (CTI) Option 4.7 ((0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4) | 5.1 ((0)_SR1, (0)_SR2, (0)_SR3) | 6.0 ((0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4, (0)_SR5) | 7.0 ((0)_SR1, (0)_SR2) | 7.1 ((2), (3), (4), (5)) Cisco Conference Connection 1.1 ((3), (3)spA) | 1.2 (Base, (1), (2), (2)SR1, (2)SR2) Cisco E-mail Manager Original Release (Base) | 4.0 (Base, .5i, .6) | 5.0 (Base, (0)_SR1, (0)_SR3, (0)_SR4, (0)_SR5, (0)_SR6, (0)_SR7) Cisco Emergency Responder 1.1 (Base, (3), (4)) | 1.2 (Base, (1), (1)SR1, (2), (2)sr1, (3)a, (3)SR1, (3a)SR2) | 1.3 (Base, (1a), (2)) Cisco Intelligent Contact Manager (ICM) Original Release (Base) | 4.6 ((2)_SR1, (2)_SR2, (2)_SR3, (2)_SR4, (2)_SR5, (2)_SR6) | 5.0 ((0), (0)_SR2, (0)_SR3, (0)_SR4, (0)_SR5, (0)_SR7, (0)_SR8, (0)_SR9, (0)_SR10, (0)_SR11, (0)_SR12, (0)_SR13) | 6.0 ((0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4, (0)_SR5, (0)_SR6, (0)_SR7, (0)_SR8, (0)_SR9, (0)_SR10) | 7.0 ((0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4) | 7.1 ((2), (3), (4), (5)) Cisco Unified Contact Center Enterprise Edition (Base, 4.6.2, 5.0, 6.0, 7.0, 7.1, 7.1.1, 7.1.3) | Express Edition (Base, 2.0, 2.0.2, 2.1, 2.1.1a, 2.1.2, 2.1.3, 2.2, 2.2.1, 2.2.2, 2.2.3b, 2.2.3b_spE, 3.0, 3.0.2, 3.0.3a_spA, 3.0.3a_spB, 3.0.3a_spC, 3.0.3a_spD, 3.1, 3.1(1)_SR1, 3.1(1)_SR2, 3.1(2)_SR1, 3.1(2)_SR2, 3.1(2)_SR3, 3.1(2)_SR4, 3.1(3)_SR2, 3.1(3)_SR3, 3.1(3)_SR4, 3.1(3)_SR5, 3.5, 3.5.1, 3.5(1)_SR1, 3.5(2)_SR1, 3.5(3), 3.5(3)_SR1, 3.5(3)_SR2, 3.5(3)_SR3, 3.5(4)_SR1, 3.5(4)_SR2, 4.0, 4.0(1)_SR1, 4.0(4)_SR1, 4.0(5)_SR1, 4.1, 4.1(1)_SR1, 4.5, 4.5(2)_SR1, 4.5(2)_SR2, 5.0(1)_SR1) | Hosted Edition (Base, 4.6.2, 5.0, 6.0, 7.0, 7.1, 7.1.1, 7.1.3) Cisco Unified IP IVR 2.0 (.2) | 2.1 (.1a, .2, .3) | 2.2 ((5), .1, .2, .3b, .3b_spE, .5, .4) | 3.0 (.1_spB, .2, .3a_spA, .3a_spB, .3a_spC, .3a_spD) | 3.1 ((1)_SR2, (2)_SR1, (2)_SR2, (2)_SR3, (3)_SR1, (3)_SR2, (3)_SR3, (3)_SR4, (3)_SR5) | 3.5 ((1)_SR1, (1)_SR2, (1)_SR3, (2)_SR1, (3)_SR1, (3)_SR2, (3)_SR3, (4)_SR1, (4)_SR2, .1, .3) | 4.0 ((1)_SR1, (4)_SR1) | 4.1 ((1)_SR1) | 4.5 ((2)_SR1, (2)_SR2) | 5.0 ((1)_SR1) Cisco IP Interoperability and Collaboration System (IPICS) 1.0 ((1.1)) Cisco IP Queue Manager 2.2 (Base) Cisco IP/VC 3540 Application Server Module 3.2 (.0.1, .138) | 3.5 (.0.8) Cisco IP/VC 3540 Rate Matching Module 3.0 (.9) Cisco Media Blender Original Release (Base) | 3.0 (Base) | 4.0 (Base) | 5.0 (Base, (0)_SR1, (0)_SR2) Cisco Networking Services for Active Directory Original Release (Base) Cisco Outbound Option Original Release (Base) Cisco Personal Assistant 1.0 (Base, (1)) | 1.1 (Base) | 1.3 (Base, .1, .2, .3, .4) | 1.4 (Base, .2, .3, .4, .5, .6) Cisco Remote Monitoring Suite Option 1.0 (Base) | 2.0 (Base, (0)_SR1) Cisco Secure Access Control Server (ACS) for Windows 2.6 (Base) | 2.6.3.2 (Base) | 2.6.4 (Base) | 2.6.4.4 (Base) | 3.0 (Base) | 3.0.1 (Base) | 3.0.1.40 (Base) | 3.0.2 (Base) | 3.0.3 (Base) | 3.0.3.6 (Base) | 3.0.4 (Base) | 3.1.1 (Base) | 3.1.1.27 (Base) | 3.1.2 (Base) | 3.2 (Base) | 3.2.1 (Base) | 3.2.3 (Base) | 3.3.1 (Base) | 3.3.2.2 (Base) | 3.3.1.16 (Base) | 3.3.3.11 (Base) | 4.0 (Base) | 4.0.1 (Base) | 4.0.1.27 (Base) | 4.1.1.23 (Base) Cisco Secure Access Control Server Solution Engine (ACSE) 3.1 (Base, .1) | 3.2 (Base, .1.20, .2.5, .3) | 3.3 (Base, .1, .1.16, .2.2, .3, .4, .4.12) | 4.0 (Base, .1, .1.42, .1.44, .1.49) | 4.1 (Base, .1.23, .1.23.3, .3, .3.12) Cisco Secure User Registration Tool (URT) Original Release (Base) | 1.2 (Base, .1) | 2.0 (Base, .7, .8) | 2.5 (Base, .1, .2, .3, .4, .5) Cisco SN 5420 Storage Router 1.1 (Base, .3, .4, .5, .7, .8) | 2.1 (.1, .2) Cisco SN 5428-2 Storage Router 3.2 (.1, .2) | 3.3 (.1, .2) | 3.4 (.1) | 3.5 (Base, .1, .2, .3, .4) Cisco Trailhead Original Release (Base) | 4.0 (Base) Cisco Unified Communications Manager Original Release (Base) | 1.0 (Base) | 2.0 (Base) | 3.0 (Base) | 3.0.3(a) (Base) | 3.1 (Base, .1, .2, .3a) | 3.1(1) (Base) | 3.1(2) (Base) | 3.1(2)SR3 (Base) | 3.1(3) (Base) | 3.1(3)SR2 (Base) | 3.1(3)SR4 (Base) | 3.2 (Base) | 3.2(3)SR3 (Base) | 3.3 (Base) | 3.3(2)SPc (Base) | 3.3(3) (Base) | 3.3(3)ES61 (Base) | 3.3(3)SR3 (Base) | 3.3(3)SR4a (Base) | 3.3(3a) (Base) | 3.3(4) (Base) | 3.3(4)ES25 (Base) | 3.3(4)SR2 (Base) | 3.3(4c) (Base) | 3.3(5) (Base) | 3.3(5)ES24 (Base) | 3.3(5)SR1 (Base) | 3.3(5)SR1a (Base) | 3.3(5)SR2 (Base) | 3.3(5)SR2a (Base) | 3.3(5)SR3 (Base) | 3.3(59) (Base) | 3.3(61) (Base) | 3.3(63) (Base) | 3.3(64) (Base) | 3.3(65) (Base) | 3.3(66) (Base) | 3.3(67.5) (Base) | 3.3(68.1) (Base) | 3.3(71.0) (Base) | 3.3(74.0) (Base) | 3.3(78) (Base) | 3.3(76) (Base) | 4.0 (.1, .2) | 4.0(2a)ES40 (Base) | 4.0(2a)ES56 (Base) | 4.0(2a)SR2b (Base) | 4.0(2a)SR2c (Base) | 4.1 (Base) | 4.1(2) (Base) | 4.1(2)ES33 (Base) | 4.1(2)ES50 (Base) | 4.1(2)SR1 (Base) | 4.1(3) (Base) | 4.1(3)ES (Base) | 4.1(3)ES07 (Base) | 4.1(3)ES24 (Base) | 4.1(3)SR (Base) | 4.1(3)SR1 (Base) | 4.1(3)SR2 (Base) | 4.1(3)SR3 (Base) | 4.1(3)SR3b (Base) | 4.1(3)SR3c (Base) | 4.1(3)SR4 (Base) | 4.1(3)SR4b (Base) | 4.1(3)SR4d (Base) | 4.1(3)SR5 (Base) | 4.1(4) (Base) | 4.1(9) (Base) | 4.1(17) (Base) | 4.1(19) (Base) | 4.1(22) (Base) | 4.1(23) (Base) | 4.1(25) (Base) | 4.1(26) (Base) | 4.1(27.7) (Base) | 4.1(28.2) (Base) | 4.1(30.4) (Base) | 4.1(36) (Base) | 4.1(39) (Base) | 4.2(1) (Base) | 4.2(1)SR1b (Base) | 4.2(1.02) (Base) | 4.2(1.05.3) (Base) | 4.2(1.06) (Base) | 4.2(1.07) (Base) | 4.2(3) (Base) | 4.2(3)SR1 (Base) | 4.2(3)SR2 (Base) | 4.2(3.08) (Base) | 4.2(3.2.3) (Base) | 4.2(3.3) (Base) | 4.2(3.13) (Base) | 4.3(1) (Base) | 4.3(1)SR (Base) | 4.3(1.57) (Base) Cisco Unified Customer Voice Portal (CVP) 3.0 ((0), (0)SR1, (0)SR2) | 3.1 ((0), (0)SR1, (0)SR2) | 4.0 ((0), (1), (1)SR1, (2)) Cisco Unified MeetingPlace 4.3 (Base) | 5.3 (Base) | 5.2 (Base) | 5.4 (Base) | 6.0 (Base) Cisco Unified MeetingPlace Express 1.1 (Base) | 1.2 (Base) | 2.0 (Base) Cisco Unity Original Release (Base) | 2.0 (Base) | 2.1 (Base) | 2.2 (Base) | 2.3 (Base) | 2.4 (Base) | 2.46 (Base) | 3.0 (Base, .1) | 3.1 (Base, .2, .3, .5, .6) | 3.2 (Base) | 3.3 (Base) | 4.0 (Base, .1, .2, .3, .3b, .4, .5) | 4.1 (Base, .1) | 4.2 (Base, .1, .1 ES27) | 5.0 ((1)) | 7.0 ((2)) Cisco Unity Express 1.0.2 (Base) | 1.1.1 (Base) | 1.1.2 (Base) | 2.0.1 (Base) | 2.0.2 (Base) | 2.1.1 (Base) | 2.1.2 (Base) | 2.1.3 (Base) | 2.2.0 (Base) | 2.2.1 (Base) | 2.2.2 (Base) | 2.3.0 (Base) | 2.3.1 (Base) Cisco Wireless Control System (WCS) Software 1.0 (Base) | 2.0 (Base, 44.14, 44.24) | 2.2 (.0, .111.0) | 3.0 (Base, .101.0, .105.0) | 3.1 (Base, .20.0, .33.0, .35.0) | 3.2 (Base, .23.0, .25.0, .40.0, .51.0, .64.0) | 4.0 (Base, .1.0, .43.0, .66.0, .81.0, .87.0, .96.0, .97.0) | 4.1 (Base, .83.0) CiscoWorks IP Telephony Environment Monitor (ITEM) 1.3 (Base) | 1.4 (Base) | 2.0 (Base) CiscoWorks LAN Management Solution (LMS) 1.3 (Base) | 2.2 (Base) | 2.5 (Base) | 2.6 (Base) CiscoWorks QoS Policy Manager (QPM) 2.0 (Base, .1, .2, .3) | 2.1 (.2) | 3.0 (Base, .1) | 3.1 (Base) | 3.2 (Base, .1, .2, .3) CiscoWorks Routed WAN Management Solution (RWAN) 1.0 (Base) | 1.1 (Base) | 1.2 (Base) | 1.3 (Base, .1) CiscoWorks Small Network Management Solution (SNMS) 1.0 (Base) | 1.5 (Base) CiscoWorks VPN/Security Management Solution (VMS) 1.0 (Base) | 2.0 (Base) | 2.1 (Base) | 2.2 (Base) | 2.3 (Base) Cisco Collaboration Server 3.0 (Base) | 3.01 (Base) | 3.02 (Base) | 4.0 (Base) | 5.0 (Base) Cisco DOCSIS CPE Configurator 1.0 (Base) | 1.1 (Base) | 2.0 (Base) Cisco Unified IP Interactive Voice Response (IVR) 2.0 (Base) | 2.1 (Base) Cisco Service Control Engine (SCE) 3.0 (Base) | 3.1 (Base) Cisco Transport Manager Original Release (Base) | 2.0 (Base) | 2.1 (Base) | 2.2 (Base, .1) | 3.0 (Base, .1, .2) | 3.1 (Base) | 3.2 (Base) | 4.0 (Base) | 4.1 (Base, .4, .6, .6.6.1) | 4.6 (Base) | 4.7 (Base) | 5.0 (Base, .0.867.2, .1.873.2, .2, .2.92.1, .2.99.1, .2.105.1, .2.110.1) | 6.0 (Base, .0.405.1, .0.407.1, .0.412.1) | 7.0 (Base, .0.370.1, .0.372.1, .0.377.1, .0.389.1, .0.400.1, .395.1) | 7.2 (Base, .0.199.1) Microsoft, Inc. Groove Server 2007 (Base, .SP2, .SP3) Microsoft Expression Web (Base, 2) Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Original Release (Base, SP1, SP2, SP3) Office 2003 (Base, SP1, SP2, SP3) | 2007 (Base, SP1, SP2, SP3) Office SharePoint Server 2007 (Base, SP1, SP2, SP3) | 2007 x64 Edition (Base, SP1, SP2, SP3) Windows 7 for 32-bit systems | for x64-based systems Windows 8 for 32-bit systems | for x64-based systems Windows RT Original Release Windows Server 2003 Datacenter Edition (Base, SP1, SP2) | Datacenter Edition, 64-bit (Itanium) (Base, SP1, SP2) | Datacenter Edition x64 (AMD/EM64T) (Base, SP1, SP2) | Enterprise Edition (Base, SP1, SP2) | Enterprise Edition, 64-bit (Itanium) (Base, SP1, SP2) | Enterprise Edition x64 (AMD/EM64T) (Base, SP1, SP2) | Standard Edition (Base, SP1, SP2) | Standard Edition, 64-bit (Itanium) (Base, SP1, SP2) | Standard Edition x64 (AMD/EM64T) (Base, SP1, SP2) | Web Edition (Base, SP1, SP2) Windows Server 2008 Datacenter Edition (Base, SP1) | Datacenter Edition, 64-bit (Base, SP1) | Itanium-Based Systems Edition (Base, SP1) | Enterprise Edition (Base, SP1) | Enterprise Edition, 64-bit (Base, SP1) | Essential Business Server Standard (Base, SP1) | Essential Business Server Premium (Base, SP1) | Essential Business Server Premium, 64-bit (Base, SP1) | Standard Edition (Base, SP1) | Standard Edition, 64-bit (Base, SP1) | Web Server (Base, SP1) | Web Server, 64-bit (Base, SP1) Windows Server 2008 R2 x64-Based Systems Edition | Itanium-Based Systems Edition Windows Server 2012 Original Release Windows Vista Home Basic (Base, SP1) | Home Premium (Base, SP1) | Business (Base, SP1) | Enterprise (Base, SP1) | Ultimate (Base, SP1) | Home Basic x64 Edition (Base, SP1) | Home Premium x64 Edition (Base, SP1) | Business x64 Edition (Base, SP1) | Enterprise x64 Edition (Base, SP1) | Ultimate x64 Edition (Base, SP1) Word Viewer 2007 (Base)
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE ALERTS AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products