-
Microsoft announced 13 security bulletins that address 47 vulnerabilities as part of the monthly security bulletin release on September 10, 2013. A summary of these bulletins is on the Microsoft website at http://technet.microsoft.com/en-us/security/bulletin/ms13-sep. This document provides identification and mitigation techniques that administrators can deploy on Cisco network devices.
The vulnerabilities that have a client software attack vector, can be exploited locally on the vulnerable device, require user interaction, can be exploited using web-based attacks (these include but are not limited to cross-site scripting, phishing, and web-based e-mail threats) or email attachments, or files stored on network shares are in the following list:
The vulnerabilities that have a network mitigation are in the following list. Cisco devices provide several countermeasures for the vulnerabilities that have a network attack vector, which will be discussed in detail later in this document.
Information about affected and unaffected products is available in the respective Microsoft advisories and the Cisco Alerts that are referenced in Cisco Event Response: Microsoft Security Bulletin Release for September 2013.
In addition, multiple Cisco products use Microsoft operating systems as their base operating system. Cisco products that may be affected by the vulnerabilities described in the referenced Microsoft advisories are detailed in the "Associated Products" table in the "Product Sets" section.
-
MS13-067, Vulnerabilities in Microsoft SharePoint Server Could Allow Remote Code Execution (2834052): These vulnerabilities have been assigned Common Vulnerabilities and Exposures (CVE) identifiers:
- CVE-2013-0081
- CVE-2013-1315
- CVE-2013-1330
- CVE-2013-3179
- CVE-2013-3180
- CVE-2013-3847
- CVE-2013-3848
- CVE-2013-3849
- CVE-2013-3857
- CVE-2013-3858
These vulnerabilities can be exploited locally and remotely with and without authentication and with and without user interaction.
Successful exploitation of the vulnerabilities that are associated with CVE-2013-1315, CVE-2013-3847, CVE-2013-3848, CVE-2013-3849, CVE-2013-3857, and CVE-2013-3858 may allow remote code execution. The attack vector for exploitation of these vulnerabilities is through HTTP packets that typically use TCP port 80 but may also use TCP ports 3128, 8000, 8010, 8080, 8888, and 24326.
Successful exploitation of the vulnerabilities that are associated with CVE-2013-3179 and CVE-2013-3180 may allow elevation of privilege. Cross-site scripting and phishing could also be used to exploit this vulnerability. Due to the nature of cross-site scripting vulnerabilities, no additional information will be presented in this bulletin for this vulnerability. For additional information about cross-site scripting attacks and the methods used to exploit these vulnerabilities, refer to the Cisco Applied Mitigation Bulletin Understanding Cross-Site Scripting (XSS) Threat Vectors.
Successful exploitation of the vulnerability that is associated with CVE-2013-0081 may result in a denial of service (DoS) condition. Repeated attempts to exploit this vulnerability could result in a sustained DoS condition. The attack vector for exploitation of these vulnerabilities is through HTTP packets that typically use TCP port 80 but may also use TCP ports 3128, 8000, 8010, 8080, 8888, and 24326.
MS13-071, Vulnerability in Windows Theme File Could Allow Remote Code Execution (2864063): This vulnerability has been assigned CVE identifier CVE-2013-0810. This vulnerability can be exploited remotely without authentication and with user interaction. Successful exploitation of this vulnerability may allow remote code execution. The attack vector for exploitation of these vulnerabilities is through HTTP packets that typically use TCP port 80 but may also use TCP ports 3128, 8000, 8010, 8080, 8888, and 24326.
MS13-079, Vulnerability in Active Directory Could Lead to Denial of Service (2853587): This vulnerability has been assigned CVE identifier CVE-2013-3868. This vulnerability can be exploited remotely without authentication and without user interaction. Successful exploitation of this vulnerability may result in a DoS condition. Repeated attempts to exploit this vulnerability could result in a sustained DoS condition. The attack vector is through Lightweight Directory Access Protocol (LDAP) packets using TCP ports 389, 636, 3268, or 3269 or UDP port 389. An attacker could exploit this vulnerability using spoofed packets.
-
Information about vulnerable, unaffected, and fixed software is available in the Microsoft Security Bulletin Summary for September 2013, which is available at the following link: http://www.microsoft.com/technet/security/bulletin/ms13-sept.mspx
-
The vulnerabilities that have a client software attack vector, can be exploited locally on the vulnerable device, require user interaction, can be exploited using web-based attacks (these include but are not limited to cross-site scripting, phishing, and web-based e-mail threats) or email attachments, or files stored on network shares are in the following list:
These vulnerabilities are mitigated most successfully at the endpoint through software updates, user education, desktop administration best practices, and endpoint protection software such as Host Intrusion Prevention Systems (HIPS) or antivirus products.
The vulnerabilities that have a network mitigation are in the following list. Cisco devices provide several countermeasures for these vulnerabilities. This section of the document provides an overview of these techniques.
Cisco IOS Software can provide effective means of exploit prevention using the following methods:
- Transit access control lists (tACLs)
- Unicast Reverse Path Forwarding (uRPF)
- IP source guard (IPSG)
These protection mechanisms filter and drop, as well as verify the source IP address of, packets that are attempting to exploit the vulnerabilities that have a network attack vector.
The proper deployment and configuration of uRPF provides an effective means of protection against attacks that use packets with spoofed source IP addresses. Unicast RPF should be deployed as close to all traffic sources as possible.
The proper deployment and configuration of IPSG provides an effective means of protection against spoofed packets at the access layer.
Effective means of exploit prevention can also be provided by Cisco ASA 5500 Series Adaptive Security Appliance, Cisco Catalyst 6500 Series ASA Services Module (ASASM), and the Firewall Services Module (FWSM) for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers using the following methods:
- tACLs
- Application layer protocol inspection
- uRPF
These protection mechanisms filter and drop, as well as verify the source IP address of, packets that are attempting to exploit the vulnerabilities that have a network attack vector.
Effective exploit prevention can also be provided by the Cisco ACE Application Control Engine Appliance and Module using application protocol inspection.
Cisco IOS NetFlow records can provide visibility into network-based exploitation attempts.
Cisco IOS Software, Cisco ASA, Cisco ASASM, Cisco FWSM firewalls, and Cisco ACE Application Control Engine Appliance and Module can provide visibility through syslog messages and counter values displayed in the output from show commands.
Effective use of Cisco Intrusion Prevention System (IPS) event actions provides visibility into and protection against attacks that attempt to exploit these vulnerabilities as discussed later in this document.
The Cisco Security Manager can also provide visibility through incidents, queries, and event reporting.
-
Organizations are advised to follow their standard risk evaluation and mitigation processes to determine the potential impact of these vulnerabilities. Triage refers to sorting projects and prioritizing efforts that are most likely to be successful. Cisco has provided documents that can help organizations develop a risk-based triage capability for their information security teams. Risk Triage for Security Vulnerability Announcements and Risk Triage and Prototyping can help organizations develop repeatable security evaluation and response processes.
-
Device-Specific Mitigation and Identification
Caution: The effectiveness of any mitigation technique depends on specific customer situations such as product mix, network topology, traffic behavior, and organizational mission. As with any configuration change, evaluate the impact of this configuration prior to applying the change.
Specific information about mitigation and identification is available for these devices:
- Cisco IOS Routers and Switches
- Cisco IOS NetFlow
- Cisco ASA, Cisco ASASM, and Cisco FWSM Firewalls
- Cisco ACE
- Cisco Intrusion Prevention System
- Cisco Security Manager
Cisco IOS Routers and Switches
Mitigation: Transit Access Control Lists
For MS13-079 to protect the network from traffic that enters the network at ingress access points, which may include Internet connection points, partner and supplier connection points, or VPN connection points, administrators are advised to deploy transit access control lists (tACLs) to perform policy enforcement. Administrators can construct a tACL by explicitly permitting only authorized traffic to enter the network at ingress access points or permitting authorized traffic to transit the network in accordance with existing security policies and configurations. A tACL workaround cannot provide complete protection against these vulnerabilities when the attack originates from a trusted source address.
The tACL policy denies unauthorized LDAP IPv4 and IPv6 packets on TCP ports 389, 636, 3268, and 3269 and UDP port 389 that are sent to affected devices. In the following example, 192.168.60.0/24 and 2001:DB8:1:60::/64 represent the IP address space that is used by the affected devices, and the hosts at 192.168.100.1 and 2001:DB8::100:1 are considered trusted sources that require access to the affected devices. Care should be taken to allow required traffic for routing and administrative access prior to denying all unauthorized traffic.
Additional information about tACLs is available in Transit Access Control Lists: Filtering at Your Edge.
!-- Include explicit permit statements for trusted sources that !-- require access on the vulnerable TCP and UDP ports !-- for MS13-079 ! access-list 150 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 389 access-list 150 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 636 access-list 150 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 3268 access-list 150 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 3269 access-list 150 permit udp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 389
! !-- The following vulnerability-specific access control entries !-- (ACEs) can aid in identification of attacks against MS13-079 ! access-list 150 deny tcp any 192.168.60.0 0.0.0.255 eq 389 access-list 150 deny tcp any 192.168.60.0 0.0.0.255 eq 636 access-list 150 deny tcp any 192.168.60.0 0.0.0.255 eq 3268 access-list 150 deny tcp any 192.168.60.0 0.0.0.255 eq 3269 access-list 150 deny udp any 192.168.60.0 0.0.0.255 eq 389
! !-- Permit or deny all other Layer 3 and Layer 4 traffic in accordance !-- with existing security policies and configurations ! !-- Explicit deny for all other IP traffic ! access-list 150 deny ip any any ! !-- Create the corresponding IPv6 tACL ! ipv6 access-list IPv6-Transit-ACL-Policy ! !-- Include explicit permit statements for trusted sources that !-- require access on the vulnerable TCP and UDP ports !-- for MS13-079 ! ! permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 389 permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 636 permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 3268 permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 3269 permit udp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 389
! !-- The following vulnerability-specific ACEs can !-- aid in identification of attacks to global and !-- link-local addresses for MS13-079 ! deny tcp any 2001:DB8:1:60::/64 eq 389 deny tcp any 2001:DB8:1:60::/64 eq 636 deny tcp any 2001:DB8:1:60::/64 eq 3268 deny tcp any 2001:DB8:1:60::/64 eq 3269 deny udp any 2001:DB8:1:60::/64 eq 389
! !-- Permit or deny all other Layer 3 and Layer 4 traffic in !-- accordance with existing security policies and configurations !-- and allow IPv6 neighbor discovery packets, which !-- include neighbor solicitation packets and neighbor !-- advertisement packets ! permit icmp any any nd-ns permit icmp any any nd-na ! !-- Explicit deny for all other IPv6 traffic ! deny ipv6 any any ! ! !-- Apply tACLs to interfaces in the ingress direction ! interface GigabitEthernet0/0 ip access-group 150 in ipv6 traffic-filter IPv6-Transit-ACL-Policy in
Note that filtering with an interface access list will elicit the transmission of ICMP unreachable messages back to the source of the filtered traffic. Generating these messages could have the undesired effect of increasing CPU utilization on the device. In Cisco IOS Software, ICMP unreachable generation is limited to one packet every 500 milliseconds by default. ICMP unreachable message generation can be disabled using the interface configuration commands no ip unreachables and no ipv6 unreachables. ICMP unreachable rate limiting can be changed from the default using the global configuration commands ip icmp rate-limit unreachable interval-in-ms and ipv6 icmp error-interval interval-in-ms.
Identification: Transit Access Control Lists
After the administrator applies the tACL to an interface, show ip access-lists and show ipv6 access-list commands will identify the number of LDAP IPv4 and IPv6 packets on TCP ports 389, 636, 3268, and 3269 and UDP port 389 that have been filtered. Administrators are advised to investigate filtered packets to determine whether they are attempts to exploit these vulnerabilities. Example output for show ip access-lists 150 and show ipv6 access-list IPv6-Transit-ACL-Policy follows:
router#show ip access-lists 150 Extended IP access list 150 10 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 389 20 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 636 30 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 3268 40 permit tcp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 3269 50 permit udp host 192.168.100.1 192.168.60.0 0.0.0.255 eq 389 60 deny tcp any 192.168.60.0 0.0.0.255 eq 389 (13 matches) 70 deny tcp any 192.168.60.0 0.0.0.255 eq 636 (29 matches) 80 deny tcp any 192.168.60.0 0.0.0.255 eq 3268 (16 matches) 90 deny tcp any 192.168.60.0 0.0.0.255 eq 3269 (6 matches) 100 deny udp any 192.168.60.0 0.0.0.255 eq 389 (30 matches) 110 deny ip any any router#
In the preceding example, access list 150 has dropped the following packets received from an untrusted host or network:
- 13 LDAP packets on TCP port 389 for ACE line 60
- 29 LDAP packets on TCP port 636 for ACE line 70
- 16 LDAP packets on TCP port 3268 for ACE line 80
- 6 LDAP packets on TCP port 3269 for ACE line 90
- 30 LDAP packets on UDP port 389 for ACE line 100
router#show ipv6 access-list IPv6-Transit-ACL-Policy IPv6 access list IPv6-Transit-ACL-Policy permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 389 (38 matches) sequence 10 permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 636 (31 matches) sequence 20 permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 3268 (13 matches) sequence 30 permit tcp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 3269 (76 matches) sequence 40 permit udp host 2001:DB8::100:1 2001:DB8:1:60::/64 eq 389 (43 matches) sequence 50 deny tcp any 2001:DB8:1:60::/64 eq 389 (32 matches) sequence 60 deny tcp any 2001:DB8:1:60::/64 eq 636 (33 matches) sequence 70 deny tcp any 2001:DB8:1:60::/64 eq 3268 (34 matches) sequence 80 deny tcp any 2001:DB8:1:60::/64 eq 3269 (35 matches) sequence 90
deny udp any 2001:DB8:1:60::/64 eq 389 (43 matches) sequence 100 permit icmp any any nd-ns (41 matches) sequence 110 permit icmp any any nd-na (41 matches) sequence 120 deny ipv6 any any (21 matches) sequence 130
In the preceding example, access list IPv6-Transit-ACL-Policy has dropped the following packets received from an untrusted host or network:
- 32 TCP packets on LDAP port 389 for ACE line 60
- 33 TCP packets on LDAP port 636 for ACE line 70
- 34 TCP packets on LDAP port 3268 for ACE line 80
- 35 TCP packets on LDAP port 3269 for ACE line 90
- 43 UDP packets on LDAP port 389 for ACE line 100
For additional information about investigating incidents using ACE counters and syslog events, reference the Identifying Incidents Using Firewall and IOS Router Syslog Events Cisco Security Intelligence Operations white paper.
Administrators can use Embedded Event Manager to provide instrumentation when specific conditions are met, such as ACE counter hits. The Cisco Security Intelligence Operations white paper Embedded Event Manager in a Security Context provides additional details about how to use this feature.
Identification: Access List Logging
The log and log-input access control list (ACL) option will cause packets that match specific ACEs to be logged. The log-input option enables logging of the ingress interface in addition to the packet source and destination IP addresses and ports.
Caution: Access control list logging can be very CPU intensive and must be used with extreme caution. Factors that drive the CPU impact of ACL logging are log generation, log transmission, and process switching to forward packets that match log-enabled ACEs.
For Cisco IOS Software, the ip access-list logging interval interval-in-ms command can limit the effects of process switching induced by IPv4 ACL logging. The logging rate-limit rate-per-second [except loglevel] command limits the impact of log generation and transmission.
The CPU impact from ACL logging can be addressed in hardware on the Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers with Supervisor Engine 720 or Supervisor Engine 32 using optimized ACL logging.
For additional information about the configuration and use of ACL logging, reference the Understanding Access Control List Logging Cisco Security Intelligence Operations white paper.
Mitigation: Spoofing Protection
Unicast Reverse Path Forwarding
Some of the vulnerabilities described in this document that have a network attack vector can be exploited by spoofed IP packets. The proper deployment and configuration of Unicast Reverse Path Forwarding (uRPF) can provide protection mechanisms for spoofing related to the following vulnerabilities:
uRPF is configured at the interface level and can detect and drop packets that lack a verifiable source IP address. Administrators should not rely on uRPF to provide complete spoofing protection because spoofed packets may enter the network through a uRPF-enabled interface if an appropriate return route to the source IP address exists. Administrators are advised to take care to ensure that the appropriate uRPF mode (loose or strict) is configured during the deployment of this feature because it can drop legitimate traffic that is transiting the network. In an enterprise environment, uRPF may be enabled at the Internet edge and the internal access layer on the user-supporting Layer 3 interfaces.
For additional information about the configuration and use of uRPF, reference the Understanding Unicast Reverse Path Forwarding Cisco Security Intelligence Operations white paper.
IP Source Guard
IP source guard (IPSG) is a security feature that restricts IP traffic on nonrouted, Layer 2 interfaces by filtering packets based on the DHCP snooping binding database and manually configured IP source bindings. Administrators can use IPSG to prevent attacks from an attacker who attempts to spoof packets by forging the source IP address and/or the MAC address. The proper deployment and configuration of IPSG coupled with strict mode uRPF can provide the most effective means of spoofing protection to help mitigate the following vulnerabilities:
Additional information about the deployment and configuration of IPSG is available in Configuring DHCP Features and IP Source Guard.
Identification: Spoofing Protection Using Unicast Reverse Path Forwarding
With uRPF properly deployed and configured throughout the network infrastructure, administrators can use the show cef interface type slot/port internal, show ip interface, show cef drop, show ip cef switching statistics feature, and show ip traffic commands to identify the number of packets that uRPF has dropped.
Note: Beginning with Cisco IOS Software Release 12.4(20)T, the command show ip cef switching has been replaced by show ip cef switching statistics feature.
Note: The show command | begin regex and show command | include regex command modifiers are used in the following examples to minimize the amount of output that administrators will need to parse to view the desired information. Additional information about command modifiers is in the show command sections of the Cisco IOS Configuration Fundamentals Command Reference.
router#show cef interface GigabitEthernet 0/0 internal | include drop ip verify: via=rx (allow default), acl=0, drop=18, sdrop=0 IPv6 unicast RPF: via=rx acl=None, drop=10, sdrop=0 router#
Note: show cef interface type slot/port internal is a hidden command that must be fully entered at the command-line interface. Command completion is not available for it.
router#show cef drop CEF Drop Statistics Slot Encap_fail Unresolved Unsupported No_route No_adj ChkSum_Err RP 27 0 0 18 0 0 router# router#show ip interface GigabitEthernet 0/0 | begin verify IP verify source reachable-via RX, allow default, allow self-ping 18 verification drops 0 suppressed verification drops router# router#show ipv6 interface GigabitEthernet 0/0 | section IPv6 verify IPv6 verify source reachable-via rx 0 verification drop(s) (process), 10 (CEF) 0 suppressed verification drop(s) (process), 0 (CEF) -- CLI Output Truncated -- router# router#show ip cef switching statistics feature IPv4 CEF input features:
Path Feature Drop Consume Punt Punt2Host Gave route
RP PAS uRPF 18 0 0 0 0 Total 18 0 0 0 0 -- CLI Output Truncated -- router# router#show ipv6 cef switching statistics feature IPv6 CEF input features: Feature Drop Consume Punt Punt2Host Gave route RP LES Verify Unicast R 10 0 0 0 0 Total 10 0 0 0 0 -- CLI Output Truncated -- router# router#show ip traffic | include RPF 18 no route, 18 unicast RPF, 0 forced drop router# router#show ipv6 traffic | include RPF 10 RPF drops, 0 RPF suppressed, 0 forced drop router#
In the preceding show cef interface type slot/port internal, show cef drop, show ip interface type slot/port and show ipv6 interface type slot/port, show ip cef switching statistics feature and show ipv6 cef switching statistics feature, and show ip traffic and show ipv6 traffic examples, uRPF has dropped the following packets received globally on all interfaces with uRPF configured because of the inability to verify the source address of the IP packets within the forwarding information base of Cisco Express Forwarding.
- 18 IPv4 packets
- 10 IPv6 packets
Cisco IOS NetFlow and Cisco IOS Flexible NetFlow
Identification: IPv4 Traffic Flow Identification Using Cisco IOS NetFlow
For MS13-079, administrators can configure Cisco IOS NetFlow on Cisco IOS routers and switches to aid in the identification of IPv4 traffic flows that may be attempts to exploit the vulnerabilities described in this document that have a network attack vector. Administrators are advised to investigate flows to determine whether they are attempts to exploit the vulnerabilities or whether they are legitimate traffic flows.
router#show ip cache flow IP packet size distribution (90784136 total packets): 1-32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 .000 .698 .011 .001 .004 .005 .000 .004 .000 .000 .003 .000 .000 .000 .000 512 544 576 1024 1536 2048 2560 3072 3584 4096 4608 .000 .001 .256 .000 .010 .000 .000 .000 .000 .000 .000 IP Flow Switching Cache, 4456704 bytes 1885 active, 63651 inactive, 59960004 added 129803821 ager polls, 0 flow alloc failures Active flows timeout in 30 minutes Inactive flows timeout in 15 seconds IP Sub Flow Cache, 402056 bytes 0 active, 16384 inactive, 0 added, 0 added to flow 0 alloc failures, 0 force free 1 chunk, 1 chunk added last clearing of statistics never Protocol Total Flows Packets Bytes Packets Active(Sec) Idle(Sec) -------- Flows /Sec /Flow /Pkt /Sec /Flow /Flow TCP-Telnet 11393421 2.8 1 48 3.1 0.0 1.4 TCP-FTP 236 0.0 12 66 0.0 1.8 4.8 TCP-FTPD 21 0.0 13726 1294 0.0 18.4 4.1 TCP-WWW 22282 0.0 21 1020 0.1 4.1 7.3 TCP-X 719 0.0 1 40 0.0 0.0 1.3 TCP-BGP 1 0.0 1 40 0.0 0.0 15.0 TCP-Frag 70399 0.0 1 688 0.0 0.0 22.7 TCP-other 47861004 11.8 1 211 18.9 0.0 1.3 UDP-DNS 582 0.0 4 73 0.0 3.4 15.4 UDP-NTP 287252 0.0 1 76 0.0 0.0 15.5 UDP-other 310347 0.0 2 230 0.1 0.6 15.9 ICMP 11674 0.0 3 61 0.0 19.8 15.5 IPv6INIP 15 0.0 1 1132 0.0 0.0 15.4 GRE 4 0.0 1 48 0.0 0.0 15.3 Total: 59957957 14.8 1 196 22.5 0.0 1.5 SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts Gi0/0 192.168.10.211 Gi0/1 192.168.60.119 06 0984 0185 1 Gi0/0 192.168.60.154 Gi0/1 192.168.60.151 11 0911 0185 3 Gi0/1 192.168.150.60 Gi0/0 10.89.16.226 06 0016 12CA 1 Gi0/0 192.168.13.197 Gi0/1 192.168.60.218 06 0B3E 027C 5 Gi0/0 192.168.10.117 Gi0/1 192.168.60.127 06 0B89 0CC4 1 Gi0/0 10.88.226.1 Gi0/1 192.168.202.22 11 007B 007B 1
Gi0/0 192.168.12.134 Gi0/1 192.168.60.39 06 0BD7 01BD 1
Gi0/0 192.168.12.125 Gi0/1 192.168.60.133 06 0BD7 0CC5 1 Gi0/0 192.168.12.195 Gi0/1 192.168.60.121 06 0BD7 008B 1 Gi0/0 10.89.16.226 Gi0/1 192.168.150.60 06 12CA 0016 1
In the preceding example, there are multiple flows for LDAP on TCP ports 389 (hex value 0185), 636 (hex value 027C), 3268 (hex value 0CC4), 3269 (hex value 0CC5), and UDP port 389 (hex value 0185).
This traffic is sourced from and sent to addresses within the 192.168.60.0/24 address block, which is used for infrastructure devices. The packets in these flows may be spoofed and may indicate an attempt to exploit these vulnerabilities. Administrators are advised to compare these flows to baseline utilization for LDAP traffic sent on UDP port 389 and also investigate the flows to determine whether they are sourced from untrusted hosts or networks.
As shown in the following example, to view only the traffic flows for LDAP packets on TCP ports 389 (hex value 0185), 636 (hex value 027C), 3268 (hex value 0CC4), and 3269 (hex value 0CC5), use the show ip cache flow | include SrcIf|_PrHex_.*(0185|027C|0CC4|0CC5)_ command to display the related Cisco NetFlow records:
TCP Flows
router#show ip cache flow | include SrcIf|_06_.*(0185|027C|0CC4|0CC5)_ SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts Gi0/0 192.168.12.110 Gi0/1 192.168.60.163 06 092A 0185 6 Gi0/0 192.168.13.17 Gi0/1 192.168.60.110 06 0814 0CC4 11 Gi0/0 192.168.12.211 Gi0/1 192.168.60.169 06 013A 0185 9 Gi0/0 192.168.11.131 Gi0/1 192.168.60.245 06 0B66 027C 18 Gi0/0 192.168.41.86 Gi0/1 192.168.60.27 06 047B 0CC5 2 Gi0/0 192.168.13.7 Gi0/1 192.168.60.162 06 0914 0CC4 1
As shown in the following example, to view only the traffic flows for LDAP packets on UDP port 389 (hex value 0185), use the show ip cache flow | include SrcIf|_PrHex_.*0185 command to display the related Cisco NetFlow records:
UDP Flows
router#show ip cache flow | include SrcIf|_11_.*0185 SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts Gi0/0 192.168.60.110 Gi0/1 192.168.60.163 11 092A 0185 6 Gi0/0 192.168.60.230 Gi0/1 192.168.60.20 11 0C09 0185 1
Identification: IPv6 Traffic Flow Identification Using Cisco IOS NetFlow
For MS13-079, administrators can configure Cisco IOS NetFlow on Cisco IOS routers and switches to aid in the identification of IPv6 traffic flows that may be attempts to exploit the vulnerabilities that are described in this document. Administrators are advised to investigate flows to determine whether they are attempts to exploit these vulnerabilities or whether they are legitimate traffic flows.
The following output is from a Cisco IOS device running Cisco IOS Software 12.4 mainline train. The command syntax will vary for different Cisco IOS Software trains.
router#show ipv6 flow cache IP packet size distribution (50078919 total packets): 1-32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 .000 .990 .001 .008 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 512 544 576 1024 1536 2048 2560 3072 3584 4096 4608 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 IP Flow Switching Cache, 475168 bytes 8 active, 4088 inactive, 6160 added 1092984 ager polls, 0 flow alloc failures Active flows timeout in 30 minutes Inactive flows timeout in 15 seconds IP Sub Flow Cache, 33928 bytes 16 active, 1008 inactive, 12320 added, 6160 added to flow 0 alloc failures, 0 force free 1 chunk, 1 chunk added SrcAddress InpIf DstAddress OutIf Prot SrcPrt DstPrt Packets 2001:DB...06::201 Gi0/0 2001:DB...28::20 Local 0x11 0x16C4 0x0185 1464 2001:DB...06::201 Gi0/0 2001:DB...28::21 Local 0x06 0x1655 0x0185 1012
2001:DB...6A:5BA6 Gi0/0 2001:DB...28::21 Gi0/1 0x3A 0x0000 0x8000 1191 2001:DB...6A:5BA6 Gi0/0 2001:DB...134::3 Gi0/1 0x3A 0x0000 0x8000 1191 2001:DB...6A:5BA6 Gi0/0 2001:DB...128::4 Gi0/1 0x3A 0x0000 0x8000 1192 2001:DB...6A:5BA6 Gi0/0 2001:DB...128::2 Gi0/1 0x06 0x160A 0x027C 2597 2001:DB...06::201 Gi0/0 2001:DB...128::3 Gi0/1 0x06 0x1610 0x0CC4 1231 2001:DB...06::201 Gi0/0 2001:DB...128::5 Gi0/1 0x06 0x1634 0x0CC5 1009 2001:DB...06::201 Gi0/0 2001:DB...128::6 Gi0/1 0x06 0x1634 0x008B 1299 2001:DB...06::201 Gi0/0 2001:DB...128::7 Gi0/1 0x06 0x1634 0x01BD 1303 2001:DB...6A:5BA6 Gi0/0 2001:DB...128::3 Gi0/1 0x3A 0x0000 0x8000 1155 2001:DB...6A:5BA6 Gi0/0 2001:DB...146::3 Gi0/1 0x3A 0x0000 0x8000 1092 2001:DB...6A:5BA6 Gi0/0 2001:DB...144::4 Gi0/1 0x3A 0x0000 0x8000 1193
To permit display of the full 128-bit IPv6 address, use the terminal width 132 exec mode command.
In the preceding example, there are multiple IPv6 flows for LDAP on TCP ports 389 (hex value 0185), 636 (hex value 027C), 3268 (hex value 0CC4), 3269 (hex value 0CC5), and UDP port 389 (hex value 0185).
As shown in the following example, to view only the LDAP packets on TCP ports 389 (hex value 0185), 636 (hex value 027C), 3268 (hex value 0CC4), and 3269 (hex value 0CC5), use the show ipv6 flow cache | include SrcIf|_PrHex_.*(0185|027C|0CC4|0CC5)_ command to display the related Cisco NetFlow records:
TCP Flows
router#show ipv6 flow cache | include SrcIf|_06_.*(0185|027C|0CC4|0CC5)_ SrcAddress InpIf DstAddress OutIf Prot SrcPrt DstPrt Packets 2001:DB...6A:5BA6 Gi0/0 2001:DB...128::4 Gi0/1 0x06 0x149D 0x01BD 1093 2001:DB...6A:5BA6 Gi0/0 2001:DB...128::5 Gi0/1 0x06 0x134D 0x027C 1994
2001:DB...6A:5BA6 Gi0/0 2001:DB...128::6 Gi0/1 0x06 0x192B 0x0CC4 1893
2001:DB...6A:5BA6 Gi0/0 2001:DB...128::7 Gi0/1 0x06 0x151A 0x0CC5 1591 router#
As shown in the following example, to view only the LDAP packets on UDP port 389 (hex value 0185), use the show ipv6 flow cache | include SrcIf|_PrHex_.*0185 command to display the related Cisco NetFlow records:
UDP Flows
router#show ip cache flow | include SrcIf|_11_.*(0185)_ SrcAddress InpIf DstAddress OutIf Prot SrcPrt DstPrt Packets 2001:DB...06::201 Gi0/0 2001:DB...28::20 Local 0x11 0x1134 0x0185 1221 router#
Identification: IPv4 Traffic Flow Identification Using Cisco IOS Flexible NetFlow
Introduced in Cisco IOS Software Releases 12.2(31)SB2 and 12.4(9)T, Cisco IOS Flexible NetFlow improves original Cisco NetFlow by adding the capability to customize the traffic analysis parameters for the administrator's specific requirements. Original Cisco NetFlow uses a fixed seven tuples of IP information to identify a flow, whereas Cisco IOS Flexible NetFlow allows the flow to be user defined. It facilitates the creation of more complex configurations for traffic analysis and data export by using reusable configuration components.
For MS13-079, administrators can configure Cisco IOS Flexible NetFlow on Cisco IOS routers and switches to aid in the identification of IPv4 traffic flows that may be attempts to exploit the vulnerabilities described in this document that have a network attack vector. Administrators are advised to investigate flows to determine whether they are attempts to exploit the vulnerabilities or whether they are legitimate traffic flows.
The following example output is from a Cisco IOS device that is running a version of Cisco IOS Software in the 15.1T train. Although the syntax will be almost identical for the 12.4T and 15.0 trains, it may vary slightly depending on the actual Cisco IOS release being used. In the following configuration, Cisco IOS Flexible NetFlow will collect information on interface GigabitEthernet0/0 for incoming IPv4 flows based on source IPv4 address, as defined by the match ipv4 source address key field statement. Cisco IOS Flexible NetFlow will also include nonkey field information about source and destination IPv4 addresses, protocol, ports (if present), ingress and egress interfaces, and packets per flow.
! !-- Configure key and nonkey fields !-- in the user-defined flow record ! flow record FLOW-RECORD-ipv4 match ipv4 source address collect ipv4 protocol collect ipv4 destination address collect transport source-port collect transport destination-port collect interface input collect interface output collect counter packets ! !-- Configure the flow monitor to !-- reference the user-defined flow !-- record ! flow monitor FLOW-MONITOR-ipv4 record FLOW-RECORD-ipv4 ! !-- Apply the flow monitor to the interface !-- in the ingress direction ! interface GigabitEthernet0/0 ip flow monitor FLOW-MONITOR-ipv4 input
The Cisco IOS Flexible NetFlow flow output is as follows:
router#show flow monitor FLOW-MONITOR-ipv4 cache format table Cache type: Normal Cache size: 4096 Current entries: 6 High Watermark: 1 Flows added: 9181 Flows aged: 9175 - Active timeout ( 1800 secs) 9000 - Inactive timeout ( 15 secs) 175 - Event aged 0 - Watermark aged 0 - Emergency aged 0 IPV4 SRC ADDR ipv4 dst addr trns src port trns dst port intf input intf output pkts ip prot ============== ============== ============= ============= ========== =========== ==== ======= 192.168.10.201 192.168.60.102 1456 139 Gi0/0 Gi0/1 1128 6 192.168.11.54 192.168.60.158 1223 389 Gi0/0 Gi0/1 1319 6 10.88.226.9 192.168.202.25 1478 25 Gi0/0 Gi0/1 461 6 192.168.150.60 192.168.60.226 2567 445 Gi0/0 Gi0/1 13 6
192.168.13.97 192.168.60.28 3451 389 Gi0/0 Gi0/1 9 17 192.168.11.12 192.168.60.97 4231 636 Gi0/0 Gi0/1 346 6 192.168.18.10 192.168.60.21 3131 3268 Gi0/0 Gi0/1 296 6 192.168.10.8 192.168.60.95 1934 3269 Gi0/0 Gi0/1 516 6
10.88.226.1 192.168.202.22 2678 25 Gi0/0 Gi0/1 567 6 10.89.16.226 192.168.150.60 3562 135 Gi0/0 Gi0/1 312 6
To only view the LDAP packets on TCP ports 389, 636, 3268, and 3269 use the show flow monitor FLOW-MONITOR-ipv4 cache format table | include IPV4 DST ADDR |_(389|636|3268|3269)_.*_6_ command to display the related NetFlow records.
To view only the LDAP packets on UDP port 389, use the show flow monitor FLOW-MONITOR-ipv6 cache format table | include IPV6 DST ADDR |_(389)_.*_11_ command to display the related NetFlow records.
For more information about Cisco IOS Flexible NetFlow, refer to Flexible Netflow Configuration Guide, Cisco IOS Release 15M&T and Cisco IOS Flexible NetFlow Configuration Guide, Release 12.4T.
Identification: IPv6 Traffic Flow Identification Using Cisco IOS Flexible NetFlow
For MS13-079, administrators can configure Cisco IOS Flexible NetFlow on Cisco IOS routers and switches to aid in the identification of IPv6 traffic flows that may be attempts to exploit the vulnerabilities described in this document that have a network attack vector. Administrators are advised to investigate flows to determine whether they are attempts to exploit the vulnerabilities or whether they are legitimate traffic flows.
The following example output is from a Cisco IOS device that is running a version of Cisco IOS Software in the 15.1T train. Although the syntax will be almost identical for the 12.4T and 15.0 trains, it may vary slightly depending on the actual Cisco IOS release being used. In the following configuration, Cisco IOS Flexible NetFlow will collect information on interface GigabitEthernet0/0 for incoming IPv6 flows based on the source IPv6 address, as defined by the match ipv6 source address key field statement. Cisco IOS Flexible NetFlow will also include nonkey field information about source and destination IPv6 addresses, protocol, ports (if present), ingress and egress interfaces, and packets per flow.
! !-- Configure key and nonkey fields !-- in the user-defined flow record ! flow record FLOW-RECORD-ipv6 match ipv6 source address collect ipv6 protocol collect ipv6 destination address collect transport source-port collect transport destination-port collect interface input collect interface output collect counter packets ! !-- Configure the flow monitor to !-- reference the user-defined flow !-- record ! flow monitor FLOW-MONITOR-ipv6 record FLOW-RECORD-ipv6 ! !-- Apply the flow monitor to the interface !-- in the ingress direction ! interface GigabitEthernet0/0 ipv6 flow monitor FLOW-MONITOR-ipv6 input
The Cisco IOS Flexible NetFlow flow output is as follows:
router#show flow monitor FLOW-MONITOR-ipv6 cache format table Cache type: Normal Cache size: 4096 Current entries: 6 High Watermark: 2 Flows added: 539 Flows aged: 532 - Active timeout ( 1800 secs) 350 - Inactive timeout ( 15 secs) 182 - Event aged 0 - Watermark aged 0 - Emergency aged 0 IPV6 SRC ADDR ipv6 dst addr trns src port trns dst port intf input intf output pkts ip prot ================= ================= ============= ============= ========== =========== ==== ======= 2001:DB...06::201 2001:DB...28::20 123 123 Gi0/0 Gi0/0 17 17 2001:DB...06::201 2001:DB...28::20 1465 389 Gi0/0 Gi0/0 1237 17 2001:DB...06::201 2001:DB...28::20 1445 389 Gi0/0 Gi0/0 2346 6 2001:DB...06::201 2001:DB...28::20 1895 139 Gi0/0 Gi0/0 3009 6 2001:DB...06::201 2001:DB...28::20 2856 5060 Gi0/0 Gi0/0 486 17 2001:DB...06::201 2001:DB...28::20 3012 53 Gi0/0 Gi0/0 1016 17 2001:DB...06::201 2001:DB...28::20 2477 53 Gi0/0 Gi0/0 1563 17 2001:DB...06::201 2001:DB...28::20 1765 636 Gi0/0 Gi0/0 3234 6 2001:DB...06::201 2001:DB...28::20 1341 445 Gi0/0 Gi0/0 1546 6 2001:DB...06::201 2001:DB...28::20 1890 3268 Gi0/0 Gi0/0 2023 6 2001:DB...06::201 2001:DB...28::20 1491 3269 Gi0/0 Gi0/0 5011 6
To permit display of the full 128-bit IPv6 address, use the terminal width 132 exec mode command.
To view only the LDAP packets on TCP ports 389, 636, 3268, and 3269 use the show flow monitor FLOW-MONITOR-ipv6 cache format table | include IPV6 DST ADDR|_(389|636|3268|3269)_.*_6_ command to display the related Cisco IOS Flexible NetFlow records.
To view only the packets on UDP port 389, use the show flow monitor FLOW-MONITOR-ipv6 cache format table | include IPV6 DST ADDR |_(389)_.*_11_ command to display the related NetFlow records.Cisco ASA, Cisco ASASM, and Cisco FWSM Firewalls
Mitigation: Transit Access Control Lists
For MS13-079, to protect the network from traffic that enters the network at ingress access points, which may include Internet connection points, partner and supplier connection points, or VPN connection points, administrators are advised to deploy tACLs to perform policy enforcement. Administrators can construct a tACL by explicitly permitting only authorized traffic to enter the network at ingress access points or permitting authorized traffic to transit the network in accordance with existing security policies and configurations. A tACL workaround cannot provide complete protection against these vulnerabilities when the attack originates from a trusted source address.
The tACL policy denies unauthorized LDAP IPv4 and IPv6 packets on TCP ports 389, 636, 3268 and 3269 and UDP port 389 that are sent to affected devices. In the following example, 192.168.60.0/24 and 2001:DB8:1:60::/64 is the IP address space that is used by the affected devices, and the hosts at 192.168.100.1 and 2001:DB8::100:1 are considered trusted sources that require access to the affected devices. Care should be taken to allow required traffic for routing and administrative access prior to denying all unauthorized traffic.
Additional information about tACLs is in Transit Access Control Lists: Filtering at Your Edge.
! !-- Include explicit permit statements for trusted sources that
!-- require access on the vulnerable TCP and UDP ports !-- for MS13-079 ! access-list tACL-Policy extended permit tcp host 192.168.100.1 192.168.60.0 255.255.255.0 eq 389 access-list tACL-Policy extended permit tcp host 192.168.100.1 192.168.60.0 255.255.255.0 eq 636 access-list tACL-Policy extended permit tcp host 192.168.100.1 192.168.60.0 255.255.255.0 eq 3268 access-list tACL-Policy extended permit tcp host 192.168.100.1 192.168.60.0 255.255.255.0 eq 3269 access-list tACL-Policy extended permit udp host 192.168.100.1 192.168.60.0 255.255.255.0 eq 389
! !-- The following vulnerability-specific ACEs !-- can aid in identification of attacks against MS13-079 ! access-list tACL-Policy extended deny tcp any 192.168.60.0 255.255.255.0 eq 389 access-list tACL-Policy extended deny tcp any 192.168.60.0 255.255.255.0 eq 636 access-list tACL-Policy extended deny tcp any 192.168.60.0 255.255.255.0 eq 3268 access-list tACL-Policy extended deny tcp any 192.168.60.0 255.255.255.0 eq 3269 access-list tACL-Policy extended deny udp any 192.168.60.0 255.255.255.0 eq 389 ! !-- Permit or deny all other Layer 3 and Layer 4 traffic in accordance !-- with existing security policies and configurations ! !-- Explicit deny for all other IP traffic ! access-list tACL-Policy extended deny ip any any ! !-- Include explicit permit statements for trusted sources that !-- require access on the vulnerable TCP and UDP ports !-- for MS13-079 ! ipv6 access-list IPv6-tACL-Policy permit tcp host 2001:DB8::100:1 2001:db8:1:60::/64 eq 389 ipv6 access-list IPv6-tACL-Policy permit tcp host 2001:DB8::100:1 2001:db8:1:60::/64 eq 636 ipv6 access-list IPv6-tACL-Policy permit tcp host 2001:DB8::100:1 2001:db8:1:60::/64 eq 3268 ipv6 access-list IPv6-tACL-Policy permit tcp host 2001:DB8::100:1 2001:db8:1:60::/64 eq 3269 ipv6 access-list IPv6-tACL-Policy permit udp host 2001:DB8::100:1 2001:db8:1:60::/64 eq 389 ! !-- The following vulnerability-specific access control entries !-- (ACEs) can aid in identification of attacks for MS13-079 ! ipv6 access-list IPv6-tACL-Policy deny tcp any 2001:db8:1:60::/64 eq 389 ipv6 access-list IPv6-tACL-Policy deny tcp any 2001:db8:1:60::/64 eq 636 ipv6 access-list IPv6-tACL-Policy deny tcp any 2001:db8:1:60::/64 eq 3268 ipv6 access-list IPv6-tACL-Policy deny tcp any 2001:db8:1:60::/64 eq 3269 ipv6 access-list IPv6-tACL-Policy deny udp any 2001:db8:1:60::/64 eq 389 ! !-- Permit or deny all other Layer 3 and Layer 4 traffic in accordance !-- with existing security policies and configurations ! !-- Explicit deny for all other IP traffic ! ipv6 access-list IPv6-tACL-Policy deny ip any any ! !-- Apply tACLs to interfaces in the ingress direction ! access-group tACL-Policy in interface outside access-group IPv6-tACL-Policy in interface outsideIdentification: Transit Access Control Lists
After the tACL has been applied to an interface, administrators can use the show access-list command to identify the number of LDAP IPv4 and IPv6 packets on TCP ports 389, 636, 3268, and 3269 and UDP port 389 that have been filtered. Administrators are advised to investigate filtered packets to determine whether they are attempts to exploit these vulnerabilities. Example output for show access-list tACL-Policy and show access-list IPv6-tACL-Policy follows:
firewall#show access-list tACL-Policy access-list tACL-Policy; 11 elements; name hash: 0x3452703d access-list tACL-Policy line 1 extended permit tcp host 192.168.100.1 192.168.60.0 255.255.255.0 eq ldap (hitcnt=31) access-list tACL-Policy line 2 extended permit tcp host 192.168.100.1 192.168.60.0 255.255.255.0 eq ldaps (hitcnt=61) access-list tACL-Policy line 3 extended permit tcp host 192.168.100.1 192.168.60.0 255.255.255.0 eq 3268 (hitcnt=131) access-list tACL-Policy line 4 extended permit tcp host 192.168.100.1 192.168.60.0 255.255.255.0 eq 3269 (hitcnt=57) access-list tACL-Policy line 5 extended permit udp host 192.168.100.1 192.168.60.0 255.255.255.0 eq ldap (hitcnt=47) access-list tACL-Policy line 6 extended deny tcp any 192.168.60.0 255.255.255.0 eq ldap (hitcnt=8) access-list tACL-Policy line 7 extended deny tcp any 192.168.60.0 255.255.255.0 eq ldaps (hitcnt=14) access-list tACL-Policy line 8 extended deny tcp any 192.168.60.0 255.255.255.0 eq 3268 (hitcnt=30) access-list tACL-Policy line 9 extended deny tcp any 192.168.60.0 255.255.255.0 eq 3269 (hitcnt=13) access-list tACL-Policy line 10 extended deny udp any 192.168.60.0 255.255.255.0 eq ldap (hitcnt=15) access-list tACL-Policy line 11 extended deny ip any any (hitcnt=8)
In the preceding example, access list tACL-Policy has dropped the following packets received from an untrusted host or network:
- 8 LDAP packets on TCP port 389 for ACE line 6
- 14 LDAP packets on TCP port 636 for ACE line 7
- 30 LDAP packets on TCP port 3268 for ACE line 8
- 13 LDAP packets on TCP port 3269 for ACE line 9
- 15 LDAP packets on UDP port 389 for ACE line 10
firewall#show access-list IPv6-tACL-Policy ipv6 access-list IPv6-tACL-Policy; 11 elements; name hash: 0x566a4229 ipv6 access-list IPv6-tACL-Policy line 1 permit tcp host 2001:db8:1:100::1 2001:db8:1:60::/64 eq ldap (hitcnt=59) ipv6 access-list IPv6-tACL-Policy line 2 permit tcp host 2001:db8:1:100::1 2001:db8:1:60::/64 eq ldaps (hitcnt=28) ipv6 access-list IPv6-tACL-Policy line 3 permit tcp host 2001:db8:1:100::1 2001:db8:1:60::/64 eq 3268 (hitcnt=124) ipv6 access-list IPv6-tACL-Policy line 4 permit tcp host 2001:db8:1:100::1 2001:db8:1:60::/64 eq 3269 (hitcnt=81) ipv6 access-list IPv6-tACL-Policy line 5 permit udp host 2001:db8:1:100::1 2001:db8:1:60::/64 eq ldap (hitcnt=63) ipv6 access-list IPv6-tACL-Policy line 6 deny tcp any 2001:db8:1:60::/64 eq ldap (hitcnt=47) ipv6 access-list IPv6-tACL-Policy line 7 deny tcp any 2001:db8:1:60::/64 eq ldaps (hitcnt=33) ipv6 access-list IPv6-tACL-Policy line 8 deny tcp any 2001:db8:1:60::/64 eq 3268 (hitcnt=216) ipv6 access-list IPv6-tACL-Policy line 9 deny tcp any 2001:db8:1:60::/64 eq 3269 (hitcnt=139) ipv6 access-list IPv6-tACL-Policy line 10 deny udp any 2001:db8:1:60::/64 eq ldap (hitcnt=127) ipv6 access-list IPv6-tACL-Policy line 11 deny ip any any (hitcnt=27)
In the preceding example, access list IPv6-tACL-Policy has dropped the following packets received from an untrusted host or network:
- 47 LDAP packets on TCP port 389 for ACE line 6
- 33 LDAP packets on TCP port 636 for ACE line 7
- 216 LDAP packets on TCP port 3268 for ACE line 8
- 139 LDAP packets on TCP port 3269 for ACE line 9
- 127 LDAP packets on UDP port 389 for ACE line 10
In addition, syslog message 106023 can provide valuable information, which includes the source and destination IP address, the source and destination port numbers, and the IP protocol for the denied packet.Identification: Firewall Access List Syslog Messages
Firewall syslog message 106023 will be generated for packets denied by an access control entry (ACE) that does not have the log keyword present. Additional information about this syslog message is in Cisco ASA 5500 Series System Log Message, 8.2 - 106023.
Information about configuring syslog for the Cisco ASA 5500 Series Adaptive Security Appliance is in Monitoring - Configuring Logging. Information about configuring syslog on the Cisco Catalyst 6500 Series ASA Services Module is in Configuring Logging. Information about configuring syslog on the FWSM for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers is in Monitoring the Firewall Services Module.
In the following example, the show logging | grep regex command extracts syslog messages from the logging buffer on the firewall. These messages provide additional information about denied packets that could indicate potential attempts to exploit the vulnerabilities that are described in this document. It is possible to use different regular expressions with the grep keyword to search for specific data in the logged messages.
Additional information about regular expression syntax is in Creating a Regular Expression.
firewall#show logging | grep 106023 Sep 10 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.18/1914 dst inside:192.168.60.191/389 by access-group "tACL-Policy" Sep 10 2013 00:15:13: %ASA-4-106023: Deny udp src outside:192.0.2.200/3095 dst inside:192.168.60.33/389 by access-group "tACL-Policy" Sep 10 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.99/1234 dst inside:192.168.60.240/636 by access-group "tACL-Policy" Sep 10 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.100/2369 dst inside:192.168.60.115/3268 by access-group "tACL-Policy" Sep 10 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:192.0.2.88/2001 dst inside:192.168.60.38/3269 by access-group "tACL-Policy" Sep 10 2013 00:15:13: %ASA-4-106023: Deny tcp src outside:2001:db8:d::a85e:172/2121 dst inside:2001:db8:1:60::134/389 by access-group "IPv6-tACL-Policy" firewall#
In the preceding example, the messages logged for the tACL tACL-Policy and IPv6-tACL-Policy show potentially spoofed LDAP packets for TCP ports 389, 3268, and 3269 and UDP port 389 sent to the address block assigned to affected devices.
Additional information about syslog messages for Cisco ASA Series Adaptive Security Appliances is in Cisco ASA 5500 Series System Log Messages, 8.2. Additional information about syslog messages for Cisco Catalyst 6500 Series ASA Services Module is in the Analyzing Syslog Messages section of the Cisco ASASM CLI Configuration Guide. Additional information about syslog messages for the Cisco FWSM is in Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Logging System Log Messages.
For additional information about investigating incidents using syslog events, reference the Identifying Incidents Using Firewall and IOS Router Syslog Events Cisco Security Intelligence Operations white paper.Mitigation: Application Layer Protocol Inspection
Application layer protocol inspection is available beginning in software release 7.2(1) for the Cisco ASA 5500 Series Adaptive Security Appliance, software release 8.5 for the Cisco Catalyst 6500 Series ASA Services Module, and in software release 4.0(1) for the Cisco Firewall Services Module. This advanced security feature performs deep packet inspection of traffic that transits the firewall. Administrators may construct an inspection policy for applications that require special handling through the configuration of inspection class maps and inspection policy maps, which are applied by means of a global or interface service policy.
Additional information about application layer protocol inspection is in the Configuring Application Layer Protocol Inspection section of the Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2 and the Configuring Application Inspection section of the Cisco Catalyst 6500 Series ASA Services Module CLI Configuration Guide, 8.5.
Caution: Application layer protocol inspection will decrease firewall performance. Administrators are advised to test performance impact in a lab environment before this feature is deployed in production environments.
HTTP Application Inspection
For MS13-071, by using the HTTP inspection engine on the Cisco ASA 5500 Series Adaptive Security Appliances, Cisco 6500 Series ASA Services Modules, and the Cisco Firewall Services Module, administrators can configure regular expressions (regexes) for pattern matching and construct inspection class maps and inspection policy maps. These methods can help protect against specific vulnerabilities, such as the one described in this document, and other threats that may be associated with HTTP traffic. The following HTTP application inspection configuration uses the Cisco Modular Policy Framework (MPF) to create a policy for inspection of traffic on TCP ports 80, 3128, 8000, 8010, 8080, 8888, and 24326, which are the default ports for the Cisco IPS #WEBPORTS variable. The HTTP application inspection policy will drop connections where the HTTP response body contains any of the regexes that are configured to match the ActiveX control that is associated with these vulnerabilities.
Caution: The configured regexes can match text strings at any location in the body of an HTML response. Care should be taken to ensure that legitimate business applications that use matching text strings without calling the ActiveX control are not affected. Additional information about regex syntax is in Creating a Regular Expression.
Additional information about ActiveX exploits and mitigations that leverage Cisco firewall technologies is available in the Preventing ActiveX Exploits with Cisco Firewall Application Layer Protocol Inspection Cisco Security Intelligence Operations white paper.
! !-- Configure regexes that look for a combination of !-- the .theme file extension and the .scr file !-- extension that is typically used to exploit the !-- vulnerability associated with MS13-071 ! regex MS13-071_1 "\.[Tt][Hh][Ee][Mm][Ee]" regex MS13-071_2 "\.[Ss][Cc][Rr]"
! !-- Configure a regex class to match on the regular !-- expressions that are configured above ! class-map type regex match-any MS13-071_regex_class match regex MS13-071_1 match regex MS13-072_2 ! !-- Configure an object group for the default ports that !-- are used by the Cisco IPS #WEBPORTS variable, which !-- are TCP ports 80 (www), 3128, 8000, 8010, 8080, 8888, !-- and 24326 ! object-group service WEBPORTS tcp port-object eq www port-object eq 3128 port-object eq 8000 port-object eq 8010 port-object eq 8080 port-object eq 8888 port-object eq 24326 ! !-- Configure an access list that uses the WEBPORTS object !-- group, which will be used to match TCP packets that !-- are destined to the #WEBPORTS variable that is used !-- by a Cisco IPS device ! access-list Webports_ACL extended permit tcp any any object-group WEBPORTS ! !-- Configure a class that uses the above-configured !-- access list to match TCP packets that are destined !-- to the ports that are used by the Cisco IPS #WEBPORTS !-- variable ! class-map Webports_Class match access-list Webports_ACL ! !-- Configure an HTTP application inspection policy that !-- identifies, drops, and logs connections that contain !-- the regexes that are configured above ! policy-map type inspect http MS_Sep_2013_policy parameters! !-- "body-match-maximum" indicates the maximum number of !-- characters in the body of an HTTP message that !-- should be searched in a body match. The default value is !-- 200 bytes. A large number such as shown here may have an !-- impact on system performance. Administrators are advised !-- to test performance impact in a lab environment before !-- this command is deployed in production environments ! body-match-maximum 1380 match response body regex class MS13-071_regex_class drop-connection log
! !-- Add the above-configured "Webports_Class" that matches !-- TCP packets that are destined to the default ports !-- that are used by the Cisco IPS #WEBPORTS variable to !-- the default policy "global_policy" and use it to !-- inspect HTTP traffic that transits the firewall ! policy-map global_policy class Webports_Class inspect http MS_Sep_2013_policy ! !-- By default, the policy "global_policy" is applied !-- globally, which results in the inspection of !-- traffic that enters the firewall from all interfaces ! service-policy global_policy global
For additional information about the configuration and use of object groups, reference the Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2 for Configuring Object Groups and the Configuring Objects and Access Lists section of the Cisco Catalyst 6500 Series ASA Services Module CLI Configuration Guide, 8.5.
Additional information about HTTP application inspection and the MPF is in the HTTP Inspection Overview section of the Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2.Identification: Application Layer Protocol Inspection
Firewall syslog message 415006 will be generated when the URI matches a user-defined regular expression. The syslog message will identify the corresponding HTTP class and HTTP policy and indicate the action applied to the HTTP connection. Additional information about this syslog message is in Cisco ASA 5500 Series System Log Message, 8.2 - 415006.
Firewall syslog message 415007 will be generated when an HTTP message body matches a user-defined regular expression. The syslog message will identify the corresponding HTTP class and HTTP policy and indicate the action applied to the HTTP connection. Additional information about this syslog message is in Cisco ASA 5500 Series System Log Message, 8.2 - 415007.
Information about configuring syslog for the Cisco ASA 5500 Series Adaptive Security Appliance is in Monitoring - Configuring Logging. Information about configuring syslog for the Cisco Catalyst 6500 Series ASA Services Module is in Configuring Logging. Information about configuring syslog on the FWSM for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers is in Monitoring the Firewall Services Module.
In the following example, the show logging | grep regex command extracts syslog messages from the logging buffer on the firewall. These messages provide additional information about denied packets that could indicate attempts to exploit these vulnerabilities. Administrators can use different regular expressions with the grep keyword to search for specific data in the logged messages.
Additional information about regular expression syntax is in Creating a Regular Expression.
HTTP Application Inspection
firewall#show logging | grep 415006 Sep 10 2013 14:36:20: %ASA-5-415006: HTTP - matched Class 23: MS13-071_regex_class in policy-map MS_Sep_2013_policy, URI matched - Dropping connection from inside:192.168.60.88/1108 to outside:192.0.2.62/80 Sep 10 2013 14:37:02: %ASA-5-415006: HTTP - matched Class 26: MS13-071_regex_class in policy-map MS_Sep_2013_policy, URI matched - Dropping connection from inside:192.168.60.71/3158 to outside:192.0.2.62/80
With HTTP application inspection enabled, the show service-policy inspect protocol command will identify the number of HTTP packets that are inspected and dropped by this feature. The following example shows output for show service-policy inspect http:
firewall# show service-policy inspect http Global policy: Service-policy: global_policy Class-map: inspection_default Class-map: Webports_Class Inspect: http MS_Sep_2013_policy, packet 5025, drop 13, reset-drop 0 protocol violations packet 0 match response body regex class MS13-071_regex_class drop-connection log, packet 13
In the preceding example, 5025 HTTP packets have been inspected and 13 HTTP packets have been dropped.Cisco ACE
Mitigation: Application Protocol Inspection
Application protocol inspection is available for the Cisco ACE Application Control Engine Appliance and Module. This advanced security feature performs deep packet inspection of traffic that transits the Cisco ACE device. Administrators can construct an inspection policy for applications that require special handling through the configuration of inspection class maps and inspection policy maps, which are applied via a global or interface service policy.
Additional information about application protocol inspection is in the Configuring Application Protocol Inspection section of the Cisco ACE 4700 Series Appliance Security Configuration Guide.
HTTP Deep Packet Inspection
To conduct HTTP deep packet inspection for MS13-071, administrators can configure regular expressions (regexes) for pattern matching and construct inspection class maps and inspection policy maps. These methods can help protect against specific vulnerabilities, such as the one described in this document, and other threats that may be associated with HTTP traffic. The following HTTP application protocol inspection configuration inspects traffic on TCP ports 80, 3128, 8000, 8010, 8080, 8888, and 24326, which are the default ports for the Cisco IPS #WEBPORTS variable. The HTTP application protocol inspection policy will drop connections where the HTTP content contains any of the regexes that are configured to match the ActiveX control that is associated with these vulnerabilities.
Caution: The configured regexes can match text strings at any location in the content of an HTML packet. Care should be taken to ensure that legitimate business applications that use matching text strings without calling the ActiveX control are not affected.
Additional information about ActiveX exploits and mitigations that leverage the Cisco ACE Application Control Engine Appliance and Module is available in the Preventing ActiveX Exploits with Cisco Application Control Engine Application Layer Protocol Inspection Cisco Security Intelligence Operations white paper.
! !-- Configure an HTTP application inspection class that !-- looks for HTTP packets that contain the .theme file !-- extension and the .scr file extension that is typically !-- used to exploit the vulnerability associated with MS13-071 ! class-map type http inspect match-any MS13-071_class
1 match content ".*\.[Tt][Hh][Ee][Mm][Ee].*"
2 match content ".*\.[Ss][Cc][Rr].*"
! !-- Configure an HTTP application inspection policy that !-- identifies, resets, and logs connections that contain !-- the regexes that are configured above ! policy-map type inspect http all-match MS_Sep_2013 class MS13-071_class
reset log ! !-- Configure an access list that matches TCP packets !-- that are destined to the #WEBPORTS variable that is !-- used by a Cisco IPS device ! access-list WEBPORTS line 8 extended permit tcp any any eq www access-list WEBPORTS line 16 extended permit tcp any any eq 3128 access-list WEBPORTS line 24 extended permit tcp any any eq 8000 access-list WEBPORTS line 32 extended permit tcp any any eq 8010 access-list WEBPORTS line 40 extended permit tcp any any eq 8080 access-list WEBPORTS line 48 extended permit tcp any any eq 8888 access-list WEBPORTS line 56 extended permit tcp any any eq 24326 ! !-- Configure a Layer 4 class that uses the above-configured !-- access list to match TCP packets that are destined !-- to the ports that are used by the Cisco IPS #WEBPORTS !-- variable ! class-map match-all L4_http_class match access-list WEBPORTS ! !-- Configure a Layer 4 policy that applies the HTTP application !-- inspection policy configured above to TCP packets that !-- are destined to the ports that are used by the Cisco IPS !-- #WEBPORTS variable ! policy-map multi-match L4_MS_Sep_2013 class L4_http_class inspect http policy MS_Sep_2013 ! !-- Apply the configuration globally across all interfaces, !-- which results in the inspection of all traffic that enters !-- the ACE ! service-policy input L4_MS_Sep_2013Identification: Application Protocol Inspection
HTTP Deep Packet Inspection
Cisco ACE Application Control Engine syslog message 415006 will be generated when the URI matches a user-defined regular expression. The syslog message will identify the corresponding HTTP class and HTTP policy and indicate the action applied to the HTTP connection. Additional information about this syslog message is in Cisco ACE 4700 Series Appliance System Message Guide - System Message 415006.
ACE/Admin# show logging | include 415006
Sep 10 2013 15:26:43: %ACE-5-415006: HTTP - matched MS13-071_class in policy-map L4_MS_Sep_2013, URI matched - Resetting connection from vlan130:192.168.60.64/1777 to vlan206:192.0.2.71/80 Connection 0x33 Sep 10 2013 15:30:33: %ACE-5-415006: HTTP - matched MS13-071_class in policy-map L4_MS_Sep_2013, URI matched - Resetting connection from vlan130:192.168.60.64/1774 to vlan206:192.0.2.71/80 Connection 0x31
When HTTP deep packet inspection is enabled, the show service-policy policyname detail command will identify the number of HTTP connections that are inspected and dropped by this feature. The following example shows output for show service-policy L4_MS_Sep_2013 detail:
ACE/Admin# show service-policy L4_MS_Sep_2013 detail Status : ACTIVE Description: ----------------------------------------- Context Global Policy: service-policy: L4_MS_Sep_2013 class: L4_http_class inspect http: L7 inspect policy : MS_Sep_2013 Url Logging: DISABLED curr conns : 0 , hit count : 1 dropped conns : 0 client pkt count : 3 , client byte count: 589 server pkt count : 3 , server byte count: 547 conn-rate-limit : 0 , drop-count : 0 bandwidth-rate-limit : 0 , drop-count : 0 L4 policy stats: Total Req/Resp: 4 , Total Allowed: 2 Total Dropped : 2 , Total Logged : 0 L7 Inspect policy : MS_Sep_2013 class/match : MS13-071_class Inspect action : reset log Total Inspected : 2 , Total Matched: 1 Total Dropped OnError: 0
In the preceding example, 4 HTTP connections have been inspected and 2 HTTP connections have been dropped.
Additional information about HTTP Deep Packet Inspection and Application Protocol Inspection is in the Configuring Application Protocol Inspection section of the Cisco ACE 4700 Series Appliance Security Configuration Guide.Cisco Intrusion Prevention System
Mitigation: Cisco IPS Signature Event Actions
Administrators can use the Cisco IPS appliances and services modules to provide threat detection and help prevent attempts to exploit several of the vulnerabilities described in this document. The following table provides an overview of CVE identifiers and the respective Cisco IPS signatures that will trigger events on potential attempts to exploit these vulnerabilities.
CVE ID Signature Release Signature ID Signature Name Enabled Severity Fidelity* CVE-2013-0081 S741
2725/0 Microsoft SharePoint Denial Of Service Yes Medium 90 CVE-2013-1315 S741 2732/0 Microsoft Excel Remote Code Execution Yes High 85 CVE-2013-0810 S741 2736/0 Microsoft Windows Theme Remote Code Execution Yes High 85 CVE-2013-3202 S741 2744/0 Microsoft Windows Internet Explorer Memory Corruption Yes High 85 CVE-2013-3203 S741 2747/0 Microsoft Windows Internet Explorer Memory Corruption Yes High 85 CVE-2013-3137 S741 2765/0 Microsoft FrontPage Information Disclosure Yes Medium 80 CVE-2013-3868 S741 2769/0 Vulnerability in Active Directory Could Lead to Denial of Service Yes Medium 85 CVE-2013-3208 S741 2771/0 Microsoft Internet Explorer Memory Corruption Vulnerability Yes High 80 CVE-2013-3180 S741 2772/0 Microsoft Sharepoint XSS Elevation of Privilege
Yes Medium 85 CVE-2013-3204 S741 2773/0 Microsoft Internet Explorer Use After Free Yes High 85 CVE-2013-3205 S741 2774/0 Microsoft Internet Explorer Memory Corruption Vulnerability Yes High 85 CVE-2013-3207 S741 2775/0 Microsoft Windows Internet Explorer Memory Corruption Yes High 85 CVE-2013-3206 S741 2777/0 Microsoft Internet Explorer Use After Free Vulnerability Yes High 85 CVE-2013-3209 S741 4155/0 Microsoft Internet Explorer Remote Code Execution Yes High 85 CVE-2013-3845 S741 4156/0 Microsoft Internet Explorer Remote Code Execution Yes High 85
* Fidelity is also referred to as Signature Fidelity Rating (SFR) and is the relative measure of the accuracy of the signature (predefined). The value ranges from 0 through 100 and is set by Cisco Systems, Inc.
Administrators can configure Cisco IPS sensors to perform an event action when an attack is detected. The configured event action performs preventive or deterrent controls to help protect against an attack that is attempting to exploit the vulnerabilities listed in the preceding table.
Exploits that use spoofed IP addresses may cause a configured event action to inadvertently deny traffic from trusted sources.
Cisco IPS sensors are most effective when deployed in inline protection mode combined with the use of an event action. Automatic Threat Prevention for Cisco IPS 7.x and 6.x sensors that are deployed in inline protection mode provides threat prevention against an attack that is attempting to exploit the vulnerability that is described in this document. Threat prevention is achieved through a default override that performs an event action for triggered signatures with a riskRatingValue greater than 90.
For additional information about the risk rating and threat rating calculation, reference Risk Rating and Threat Rating: Simplify IPS Policy Management.Cisco IPS Signature Event Data
The following data has been compiled through remote monitoring services provided by the Cisco Remote Management Services team from a sample group of Cisco IPS sensors running Cisco IPS Signature Update version S741 or greater. The purpose of this data is to provide visibility into attempts to exploit the vulnerabilities released as part of the Microsoft September Security Update released on September 10, 2013. This data was gathered from events triggered on September 24, 2013.
CVE ID Signature ID Percentage of Sensors Reporting the Signature Percentage of Sensors Reporting the Signature Among Top Ten Most-Seen Events CVE-2013-0081 2725/0 0 0 CVE-2013-1315 2732/0 0 0 CVE-2013-0810 2736/0 0 0 CVE-2013-3202 2744/0 0 0 CVE-2013-3203 2747/0 0 0 CVE-2013-3137 2765/0 0 0 CVE-2013-3868 2769/0 3 3 CVE-2013-3208 2771/0 0 0 CVE-2013-3180 2772/0 0 0 CVE-2013-3204 2773/0 0 0 CVE-2013-3205 2774/0 0 0 CVE-2013-3207 2775/0 0 0 CVE-2013-3206 2777/0 0 0 CVE-2013-3209 4155/0 0 0 CVE-2013-3845 4156/0 0 0 Cisco Security Manager
Identification: Cisco Security Manager
Cisco Security Manager, Event Viewer
Beginning in software version 4.0, Cisco Security Manager can collect syslogs from Cisco firewalls and Cisco IPS devices and provides the Event Viewer, which can query for events that are related to the vulnerabilities that are described in this document.
Using the IPS Alert Events predefined view in the Event Viewer, the user can enter the search string 2725/0 in the event filter to return all captured events related to Cisco IPS signature 2725/0.
Using the following filters in the Firewall Denied Events predefined view in the Event Viewer provides all captured Cisco firewall access list deny syslog messages that could indicate potential attempts to exploit the vulnerabilities that are described in this document.
- Use the Destination event filter to filter network objects that contain the IP address space that is used by the affected devices (for example, IPv4 address range 192.168.60.0/24 and IPv6 address range 2001:DB8:1:60::/64)
- Use the Destination Service event filter to filter objects that contain:
- TCP port 389
- TCP port 636
- TCP port 3268
- TCP port 3269
- UDP port 389
An Event Type ID filter can be used with the Firewall Denied Events predefined view in the Event Viewer to filter the syslog IDs shown in the following list to provide all captured Cisco firewall deny syslog messages that could indicate potential attempts to exploit the vulnerabilities that are described in this document:
- ASA-4-106021 (uRPF spoofing)
- ASA-4-415006 (HTTP inspection)
- ASA-4-106023 (ACL deny)
For more information about Cisco Security Manager Events, refer to the Filtering and Querying Events section of the Cisco Security Manager User Guide.
Cisco Security Manager Report Manager
Beginning in software version 4.1, Cisco Security Manager supports the Report Manager, the Cisco IPS event reporting feature. This feature allows an administrator to define reports based on Cisco IPS events of interest. Reports can be scheduled or users can run ad hoc reports as required.
Using the Report Manager, the user can define an IPS Top Signatures report for Cisco IPS devices of interest based on time-range and signature characteristics. When the Signature ID is set to
- 2725/0
- 2732/0
- 2736/0
- 2744/0
- 2747/0
- 2765/0
- 2769/0
- 2771/0
- 2772/0
- 2773/0
- 2774/0
- 2775/0
- 2777/0
- 4155/0
- 4156/0
Cisco Security Manager will generate a comprehensive report that ranks the count of the alerts fired for the signature of interest compared to the total sum of all signature alerts shown in the report.
Also in the Report Manager, the Top Services report can be used with the following configuration to generate a report of events that indicate potential attempts to exploit the vulnerabilities that are described in this document:
- Use the Destination IP network filter to filter network objects that contain the IP address space that is used by the affected devices (for example, IPv4 address range 192.168.60.0/24 and IPv6 address range 2001:DB8:1:60::/64)
- Set an action of Deny on the Criteria settings page
Identification: Event Management System Partner Events
Cisco works with industry-leading Security Information and Event Management (SIEM) companies through the Cisco Developer Network. This partnership helps Cisco deliver validated and tested SIEM systems that address business concerns such as long-term log archiving and forensics, heterogeneous event correlation, and advanced compliance reporting. Security Information and Event Management partner products can be leveraged to collect events from Cisco devices and then query the collected events for the incidents created by a Cisco IPS signature or deny syslog messages from firewalls that could indicate potential attempts to exploit the vulnerabilities that are described in this document. The queries can be made by Sig ID and Syslog ID as shown in the following list:
- 2725/0 Microsoft SharePoint Denial Of Service
- 2732/0 Microsoft Excel Remote Code Execution
- 2736/0 Microsoft Windows Theme Remote Code Execution
- 2744/0 Microsoft Windows Internet Explorer Memory Corruption
- 2747/0 Microsoft Windows Internet Explorer Memory Corruption
- 2765/0 Microsoft FrontPage Information Disclosure
- 2769/0 Vulnerability in Active Directory Could Lead to Denial of Service
- 2771/0 Microsoft Internet Explorer Memory Corruption Vulnerability
- 2772/0 Microsoft Sharepoint XSS Elevation of Privilege
- 2773/0 Microsoft Internet Explorer Use After Free
- 2774/0 Microsoft Internet Explorer Memory Corruption Vulnerability
- 2775/0 Microsoft Windows Internet Explorer Memory Corruption
- 2777/0 Microsoft Internet Explorer Use After Free Vulnerability
- 4155/0 Microsoft Internet Explorer Remote Code Execution
- 4156/0 Microsoft Internet Explorer Remote Code Execution
- ASA-4-106021 (uRPF spoofing)
- ASA-4-106023 (ACL deny)
- ASA-4-415006 (HTTP inspection)
For more information about SIEM partners, refer to the Security Management System website.
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
-
Version Description Section Date 4 IPS signature event data from Cisco Remote Management Services is available for IPS signatures from September 24, 2013. 2013-September-25 17:25 GMT 3 IPS signature event data from Cisco Remote Management Services is available for IPS signatures from September 17, 2013.
2013-September-18 17:25 GMT
-
Complete information on reporting security vulnerabilities in Cisco products, obtaining assistance with security incidents, and registering to receive security information from Cisco, is available on Cisco's worldwide website at https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html. This includes instructions for press inquiries regarding Cisco security notices. All Cisco security advisories are available at http://www.cisco.com/go/psirt.
-
The security vulnerability applies to the following combinations of products.
Primary Products Microsoft, Inc. Access 2007 (Base) | 2010 (32-bit editions, 64-bit editions, 32-bit editions SP1, 64-bit editions SP1, 32-bit editions SP2, 64-bit editions SP2) | 2013 (32-bit editions, 64-bit editions) Excel 2003 (Base, SP1, SP2, SP3) | 2007 (Base, SP1, SP2, SP3) | 2010 (32-bit edition) (Base, SP1) | 2010 (64-bit edition) (Base, SP1) | 2013 (32-bit edition) (Base) | 2013 (64-bit edition) (Base) | 2013 RT (Base) Exchange Server 2007 (Base, SP1, SP2, SP3) | 2010 (Base, SP1, SP2, SP3) | 2013 (Base, CU1, CU2, CU3) FrontPage 2003 (Base) Internet Explorer 6.0 (Base) | 7.0 (Base) | 8.0 (Base) | 9.0 (Base) | 10.0 (Base) Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Original Release (Base, SP1, SP2, SP3) Microsoft Office Word Viewer 2003 (Base, SP1, SP2, SP3) Office 2003 (SP3) | 2007 (SP3) | 2010 (SP1) Office for Mac 2011 (Base) Office SharePoint Server 2007 (SP3) | 2007 x64 Edition (SP3) | 2010 (SP1, SP2) | 2013 (Base) Outlook 2007 (SP3) | 2010 (SP1, SP2) SharePoint Portal Server 2003 (SP3) Windows 7 for 32-bit systems (Base, SP1) | for x64-based systems (Base, SP1) Windows 8 for 32-bit systems (Base) | for x64-based systems (Base) Windows RT Original Release (Base) Windows Server 2003 Datacenter Edition (Base, SP1, SP2) | Datacenter Edition, 64-bit (Itanium) (Base, SP1, SP2) | Datacenter Edition x64 (AMD/EM64T) (Base, SP1, SP2) | Enterprise Edition (Base, SP1, SP2) | Enterprise Edition, 64-bit (Itanium) (Base, SP1, SP2) | Enterprise Edition x64 (AMD/EM64T) (Base, SP1, SP2) | Standard Edition (Base, SP1, SP2) | Standard Edition, 64-bit (Itanium) (Base, SP1, SP2) | Standard Edition x64 (AMD/EM64T) (Base, SP1, SP2) | Web Edition (Base, SP1, SP2) Windows Server 2008 Datacenter Edition (Base, SP1, SP2) | Datacenter Edition, 64-bit (Base, SP1, SP2) | Itanium-Based Systems Edition (Base, SP1, SP2) | Enterprise Edition (Base, SP1, SP2) | Enterprise Edition, 64-bit (Base, SP1, SP2) | Essential Business Server Standard (Base, SP1, SP2) | Essential Business Server Premium (Base, SP1, SP2) | Essential Business Server Premium, 64-bit (Base, SP1, SP2) | Standard Edition (Base, SP1, SP2) | Standard Edition, 64-bit (Base, SP1, SP2) | Web Server (Base, SP1, SP2) | Web Server, 64-bit (Base, SP1, SP2) Windows Server 2008 R2 x64-Based Systems Edition (Base, SP1) | Itanium-Based Systems Edition (Base, SP1) Windows Server 2012 Original Release (Base) Windows SharePoint Services 2.0 (Base, SP1, SP2, SP3) | 3.0 (SP3) Windows Vista Home Basic (Base, SP1, SP2) | Home Premium (Base, SP1, SP2) | Business (Base, SP1, SP2) | Enterprise (Base, SP1, SP2) | Ultimate (Base, SP1, SP2) | Home Basic x64 Edition (Base, SP1, SP2) | Home Premium x64 Edition (Base, SP1, SP2) | Business x64 Edition (Base, SP1, SP2) | Enterprise x64 Edition (Base, SP1, SP2) | Ultimate x64 Edition (Base, SP1, SP2) Word 2003 (SP3) | 2007 (SP3) | 2010 (32-bit Edition, 64-bit Edition, SP1, SP2) Word Viewer 2007 (Base) SharePoint Foundation 2010 (SP1, SP2) | 2013 (Base) Microsoft Pinyin IME 2010 (Base)
Associated Products Cisco Cisco Broadband Troubleshooter Original Release (Base) | 3.1 (Base) | 3.2 (Base) Cisco Building Broadband Service Manager (BBSM) Original Release (Base) | 2.5 (.1) | 3.0 (Base) | 4.0 (Base, .1) | 4.2 (Base) | 4.3 (Base) | 4.4 (Base) | 4.5 (Base) | 5.0 (Base) | 5.1 (Base) | 5.2 (Base) Cisco CNS Network Registrar 2.5 (Base) | 3.0 (Base) | 3.5 (Base, .1) | 5.0 (Base) | 5.5 (Base, .13) | 6.0 (.5, .5.2, .5.3, .5.4) | 6.1 (Base, .1, .1.1, .1.2, .1.3, .1.4) Cisco Collaboration Server Dynamic Content Adapter (DCA) Original Release (Base) | 1.0 (Base) | 2.0 (Base, (1)_SR2) Cisco Computer Telephony Integration (CTI) Option 4.7 ((0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4) | 5.1 ((0)_SR1, (0)_SR2, (0)_SR3) | 6.0 ((0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4, (0)_SR5) | 7.0 ((0)_SR1, (0)_SR2) | 7.1 ((2), (3), (4), (5)) Cisco Conference Connection 1.1 ((3), (3)spA) | 1.2 (Base, (1), (2), (2)SR1, (2)SR2) Cisco E-mail Manager Original Release (Base) | 4.0 (Base, .5i, .6) | 5.0 (Base, (0)_SR1, (0)_SR3, (0)_SR4, (0)_SR5, (0)_SR6, (0)_SR7) Cisco Emergency Responder 1.1 (Base, (3), (4)) | 1.2 (Base, (1), (1)SR1, (2), (2)sr1, (3)a, (3)SR1, (3a)SR2) | 1.3 (Base, (1a), (2)) Cisco Intelligent Contact Manager (ICM) Original Release (Base) | 4.6 ((2)_SR1, (2)_SR2, (2)_SR3, (2)_SR4, (2)_SR5, (2)_SR6) | 5.0 ((0), (0)_SR2, (0)_SR3, (0)_SR4, (0)_SR5, (0)_SR7, (0)_SR8, (0)_SR9, (0)_SR10, (0)_SR11, (0)_SR12, (0)_SR13) | 6.0 ((0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4, (0)_SR5, (0)_SR6, (0)_SR7, (0)_SR8, (0)_SR9, (0)_SR10) | 7.0 ((0)_SR1, (0)_SR2, (0)_SR3, (0)_SR4) | 7.1 ((2), (3), (4), (5)) Cisco Unified Contact Center Enterprise Edition (Base, 4.6.2, 5.0, 6.0, 7.0, 7.1, 7.1.1, 7.1.3) | Express Edition (Base, 2.0, 2.0.2, 2.1, 2.1.1a, 2.1.2, 2.1.3, 2.2, 2.2.1, 2.2.2, 2.2.3b, 2.2.3b_spE, 3.0, 3.0.2, 3.0.3a_spA, 3.0.3a_spB, 3.0.3a_spC, 3.0.3a_spD, 3.1, 3.1(1)_SR1, 3.1(1)_SR2, 3.1(2)_SR1, 3.1(2)_SR2, 3.1(2)_SR3, 3.1(2)_SR4, 3.1(3)_SR2, 3.1(3)_SR3, 3.1(3)_SR4, 3.1(3)_SR5, 3.5, 3.5.1, 3.5(1)_SR1, 3.5(2)_SR1, 3.5(3), 3.5(3)_SR1, 3.5(3)_SR2, 3.5(3)_SR3, 3.5(4)_SR1, 3.5(4)_SR2, 4.0, 4.0(1)_SR1, 4.0(4)_SR1, 4.0(5)_SR1, 4.1, 4.1(1)_SR1, 4.5, 4.5(2)_SR1, 4.5(2)_SR2, 5.0(1)_SR1) | Hosted Edition (Base, 4.6.2, 5.0, 6.0, 7.0, 7.1, 7.1.1, 7.1.3) Cisco Unified IP IVR 2.0 (.2) | 2.1 (.1a, .2, .3) | 2.2 ((5), .1, .2, .3b, .3b_spE, .5, .4) | 3.0 (.1_spB, .2, .3a_spA, .3a_spB, .3a_spC, .3a_spD) | 3.1 ((1)_SR2, (2)_SR1, (2)_SR2, (2)_SR3, (3)_SR1, (3)_SR2, (3)_SR3, (3)_SR4, (3)_SR5) | 3.5 ((1)_SR1, (1)_SR2, (1)_SR3, (2)_SR1, (3)_SR1, (3)_SR2, (3)_SR3, (4)_SR1, (4)_SR2, .1, .3) | 4.0 ((1)_SR1, (4)_SR1) | 4.1 ((1)_SR1) | 4.5 ((2)_SR1, (2)_SR2) | 5.0 ((1)_SR1) Cisco IP Interoperability and Collaboration System (IPICS) 1.0 ((1.1)) Cisco IP Queue Manager 2.2 (Base) Cisco IP/VC 3540 Application Server Module 3.2 (.0.1, .138) | 3.5 (.0.8) Cisco IP/VC 3540 Rate Matching Module 3.0 (.9) Cisco Media Blender Original Release (Base) | 3.0 (Base) | 4.0 (Base) | 5.0 (Base, (0)_SR1, (0)_SR2) Cisco Networking Services for Active Directory Original Release (Base) Cisco Outbound Option Original Release (Base) Cisco Personal Assistant 1.0 (Base, (1)) | 1.1 (Base) | 1.3 (Base, .1, .2, .3, .4) | 1.4 (Base, .2, .3, .4, .5, .6) Cisco Remote Monitoring Suite Option 1.0 (Base) | 2.0 (Base, (0)_SR1) Cisco Secure Access Control Server (ACS) for Windows 2.6 (Base) | 2.6.3.2 (Base) | 2.6.4 (Base) | 2.6.4.4 (Base) | 3.0 (Base) | 3.0.1 (Base) | 3.0.1.40 (Base) | 3.0.2 (Base) | 3.0.3 (Base) | 3.0.3.6 (Base) | 3.0.4 (Base) | 3.1.1 (Base) | 3.1.1.27 (Base) | 3.1.2 (Base) | 3.2 (Base) | 3.2.1 (Base) | 3.2.3 (Base) | 3.3.1 (Base) | 3.3.2.2 (Base) | 3.3.1.16 (Base) | 3.3.3.11 (Base) | 4.0 (Base) | 4.0.1 (Base) | 4.0.1.27 (Base) | 4.1.1.23 (Base) Cisco Secure Access Control Server Solution Engine (ACSE) 3.1 (Base, .1) | 3.2 (Base, .1.20, .2.5, .3) | 3.3 (Base, .1, .1.16, .2.2, .3, .4, .4.12) | 4.0 (Base, .1, .1.42, .1.44, .1.49) | 4.1 (Base, .1.23, .1.23.3, .3, .3.12) Cisco Secure User Registration Tool (URT) Original Release (Base) | 1.2 (Base, .1) | 2.0 (Base, .7, .8) | 2.5 (Base, .1, .2, .3, .4, .5) Cisco SN 5420 Storage Router 1.1 (Base, .3, .4, .5, .7, .8) | 2.1 (.1, .2) Cisco SN 5428-2 Storage Router 3.2 (.1, .2) | 3.3 (.1, .2) | 3.4 (.1) | 3.5 (Base, .1, .2, .3, .4) Cisco Trailhead Original Release (Base) | 4.0 (Base) Cisco Unified Communications Manager Original Release (Base) | 1.0 (Base) | 2.0 (Base) | 3.0 (Base) | 3.0.3(a) (Base) | 3.1 (Base, .1, .2, .3a) | 3.1(1) (Base) | 3.1(2) (Base) | 3.1(2)SR3 (Base) | 3.1(3) (Base) | 3.1(3)SR2 (Base) | 3.1(3)SR4 (Base) | 3.2 (Base) | 3.2(3)SR3 (Base) | 3.3 (Base) | 3.3(2)SPc (Base) | 3.3(3) (Base) | 3.3(3)ES61 (Base) | 3.3(3)SR3 (Base) | 3.3(3)SR4a (Base) | 3.3(3a) (Base) | 3.3(4) (Base) | 3.3(4)ES25 (Base) | 3.3(4)SR2 (Base) | 3.3(4c) (Base) | 3.3(5) (Base) | 3.3(5)ES24 (Base) | 3.3(5)SR1 (Base) | 3.3(5)SR1a (Base) | 3.3(5)SR2 (Base) | 3.3(5)SR2a (Base) | 3.3(5)SR3 (Base) | 3.3(59) (Base) | 3.3(61) (Base) | 3.3(63) (Base) | 3.3(64) (Base) | 3.3(65) (Base) | 3.3(66) (Base) | 3.3(67.5) (Base) | 3.3(68.1) (Base) | 3.3(71.0) (Base) | 3.3(74.0) (Base) | 3.3(78) (Base) | 3.3(76) (Base) | 4.0 (.1, .2) | 4.0(2a)ES40 (Base) | 4.0(2a)ES56 (Base) | 4.0(2a)SR2b (Base) | 4.0(2a)SR2c (Base) | 4.1 (Base) | 4.1(2) (Base) | 4.1(2)ES33 (Base) | 4.1(2)ES50 (Base) | 4.1(2)SR1 (Base) | 4.1(3) (Base) | 4.1(3)ES (Base) | 4.1(3)ES07 (Base) | 4.1(3)ES24 (Base) | 4.1(3)SR (Base) | 4.1(3)SR1 (Base) | 4.1(3)SR2 (Base) | 4.1(3)SR3 (Base) | 4.1(3)SR3b (Base) | 4.1(3)SR3c (Base) | 4.1(3)SR4 (Base) | 4.1(3)SR4b (Base) | 4.1(3)SR4d (Base) | 4.1(3)SR5 (Base) | 4.1(4) (Base) | 4.1(9) (Base) | 4.1(17) (Base) | 4.1(19) (Base) | 4.1(22) (Base) | 4.1(23) (Base) | 4.1(25) (Base) | 4.1(26) (Base) | 4.1(27.7) (Base) | 4.1(28.2) (Base) | 4.1(30.4) (Base) | 4.1(36) (Base) | 4.1(39) (Base) | 4.2(1) (Base) | 4.2(1)SR1b (Base) | 4.2(1.02) (Base) | 4.2(1.05.3) (Base) | 4.2(1.06) (Base) | 4.2(1.07) (Base) | 4.2(3) (Base) | 4.2(3)SR1 (Base) | 4.2(3)SR2 (Base) | 4.2(3.08) (Base) | 4.2(3.2.3) (Base) | 4.2(3.3) (Base) | 4.2(3.13) (Base) | 4.3(1) (Base) | 4.3(1)SR (Base) | 4.3(1.57) (Base) Cisco Unified Customer Voice Portal (CVP) 3.0 ((0), (0)SR1, (0)SR2) | 3.1 ((0), (0)SR1, (0)SR2) | 4.0 ((0), (1), (1)SR1, (2)) Cisco Unified MeetingPlace 4.3 (Base) | 5.3 (Base) | 5.2 (Base) | 5.4 (Base) | 6.0 (Base) Cisco Unified MeetingPlace Express 1.1 (Base) | 1.2 (Base) | 2.0 (Base) Cisco Unity Original Release (Base) | 2.0 (Base) | 2.1 (Base) | 2.2 (Base) | 2.3 (Base) | 2.4 (Base) | 2.46 (Base) | 3.0 (Base, .1) | 3.1 (Base, .2, .3, .5, .6) | 3.2 (Base) | 3.3 (Base) | 4.0 (Base, .1, .2, .3, .3b, .4, .5) | 4.1 (Base, .1) | 4.2 (Base, .1, .1 ES27) | 5.0 ((1)) | 7.0 ((2)) Cisco Unity Express 1.0.2 (Base) | 1.1.1 (Base) | 1.1.2 (Base) | 2.0.1 (Base) | 2.0.2 (Base) | 2.1.1 (Base) | 2.1.2 (Base) | 2.1.3 (Base) | 2.2.0 (Base) | 2.2.1 (Base) | 2.2.2 (Base) | 2.3.0 (Base) | 2.3.1 (Base) Cisco Wireless Control System (WCS) Software 1.0 (Base) | 2.0 (Base, 44.14, 44.24) | 2.2 (.0, .111.0) | 3.0 (Base, .101.0, .105.0) | 3.1 (Base, .20.0, .33.0, .35.0) | 3.2 (Base, .23.0, .25.0, .40.0, .51.0, .64.0) | 4.0 (Base, .1.0, .43.0, .66.0, .81.0, .87.0, .96.0, .97.0) | 4.1 (Base, .83.0) CiscoWorks IP Telephony Environment Monitor (ITEM) 1.3 (Base) | 1.4 (Base) | 2.0 (Base) CiscoWorks LAN Management Solution (LMS) 1.3 (Base) | 2.2 (Base) | 2.5 (Base) | 2.6 (Base) CiscoWorks QoS Policy Manager (QPM) 2.0 (Base, .1, .2, .3) | 2.1 (.2) | 3.0 (Base, .1) | 3.1 (Base) | 3.2 (Base, .1, .2, .3) CiscoWorks Routed WAN Management Solution (RWAN) 1.0 (Base) | 1.1 (Base) | 1.2 (Base) | 1.3 (Base, .1) CiscoWorks Small Network Management Solution (SNMS) 1.0 (Base) | 1.5 (Base) CiscoWorks VPN/Security Management Solution (VMS) 1.0 (Base) | 2.0 (Base) | 2.1 (Base) | 2.2 (Base) | 2.3 (Base) Cisco Collaboration Server 3.0 (Base) | 3.01 (Base) | 3.02 (Base) | 4.0 (Base) | 5.0 (Base) Cisco DOCSIS CPE Configurator 1.0 (Base) | 1.1 (Base) | 2.0 (Base) Cisco Unified IP Interactive Voice Response (IVR) 2.0 (Base) | 2.1 (Base) Cisco Service Control Engine (SCE) 3.0 (Base) | 3.1 (Base) Cisco Transport Manager Original Release (Base) | 2.0 (Base) | 2.1 (Base) | 2.2 (Base, .1) | 3.0 (Base, .1, .2) | 3.1 (Base) | 3.2 (Base) | 4.0 (Base) | 4.1 (Base, .4, .6, .6.6.1) | 4.6 (Base) | 4.7 (Base) | 5.0 (Base, .0.867.2, .1.873.2, .2, .2.92.1, .2.99.1, .2.105.1, .2.110.1) | 6.0 (Base, .0.405.1, .0.407.1, .0.412.1) | 7.0 (Base, .0.370.1, .0.372.1, .0.377.1, .0.389.1, .0.400.1, .395.1) | 7.2 (Base, .0.199.1) Microsoft, Inc. Office 2003 (Base, SP1, SP2) | 2007 (Base, SP1, SP2) | 2010 (Base, SP2) | 2013 (32-bit editions, 64-bit editions) Windows 7 for 32-bit systems | for x64-based systems Windows 8 for 32-bit systems | for x64-based systems Windows RT Original Release Windows Server 2003 Datacenter Edition | Datacenter Edition, 64-bit (Itanium) | Datacenter Edition x64 (AMD/EM64T) | Enterprise Edition | Enterprise Edition, 64-bit (Itanium) | Enterprise Edition x64 (AMD/EM64T) | Standard Edition | Standard Edition, 64-bit (Itanium) | Standard Edition x64 (AMD/EM64T) | Web Edition Windows Server 2008 Datacenter Edition | Datacenter Edition, 64-bit | Itanium-Based Systems Edition | Enterprise Edition | Enterprise Edition, 64-bit | Essential Business Server Standard | Essential Business Server Premium | Essential Business Server Premium, 64-bit | Standard Edition | Standard Edition, 64-bit | Web Server | Web Server, 64-bit Windows Server 2008 R2 x64-Based Systems Edition | Itanium-Based Systems Edition Windows Server 2012 Original Release Windows Vista Home Basic | Home Premium | Business | Enterprise | Ultimate | Home Basic x64 Edition | Home Premium x64 Edition | Business x64 Edition | Enterprise x64 Edition | Ultimate x64 Edition
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE ALERTS AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products