How do I restore the TANDBERG Codec to factory default settings?

Available Languages

Updated:April 23, 2015
Document ID:112447

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article relates to the Cisco TelePresence System Codec C90, Cisco TelePresence System Codec C60, Cisco TelePresence System Codec C40 and Cisco TelePresence System EX90 products.

Q. How do I restore the TANDBERG Codec to factory default settings?

A. This answer is valid for the following products:

TANDBERG Codec C20

TANDBERG Codec C40

TANDBERG Codec C60

TANDBERG Codec C90

TANDBERG EX90

A factory reset can be performed by executing a single API command.

Log into the system as admin using SSH (Secure Shell):

  1. Execute the API command: xCommand systemunit FactoryReset Confirm: Yes

  2. The system will now reboot

The procedure will reset or delete:

  • All passwords to factory default

  • All configurations to factory default, including SIP and H.323 settings

  • Local phonebook

  • All logs

  • DHCP-information

The procedure will not delete software release - and option keys.

Related Information

Revision History

Revision Publish Date Comments
1.0
23-Apr-2015
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco