Can I send content on the TANDBERG EX90 using HDMI 1 as input source?

Available Languages

Updated:April 23, 2015
Document ID:112493

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article relates to Cisco TelePresence System EX90.

Q. Can I send content on the TANDBERG EX90 using HDMI 1 as input source?

A. Yes, and to do that configure the system as follows:

  1. Tap the Adjustments icon in the bottom left corner on the inTouch main menu.

  2. Select Settings > Source and set the source to DVD. By selecting DVD as source on the inTouch interface, HDMI 1 is used as input source. Note that the Source selector icon will only be visible if both input sources are connected. If there is only one source, the TANDBERG EX90 will select this source automatically.

Related Information

Revision History

Revision Publish Date Comments
1.0
23-Apr-2015
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco