![](https://tools.cisco.com/security/center/images/blue-square.png)
AV:N/AC:L/Au:S/C:C/I:C/A:C/E:F/RL:U/RC:C
-
A vulnerability in the certificate generation process in the admin web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system with root-level privileges.
The vulnerability is due to the improper validation of parameters passed to the affected system scripts. An attacker could exploit this vulnerability by passing arbitrary commands as arguments to the affected fields of the web interface. An exploit could allow the attacker to run arbitrary commands on the underlying system with root-level privileges.
Cisco has released software updates that address this vulnerability. Workarounds that mitigate this vulnerability are not available. This advisory is available at the following link:
http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20151104-wsa
-
Vulnerable Products
This vulnerability affects Cisco AsyncOS for the WSA versions 8.0 and later, both virtual and hardware versions. To determine whether a vulnerable version of Cisco IronPort AsyncOS Software for Cisco Web Security is running on an appliance, administrators can issue the version command. The following example shows a device running Cisco IronPort AsyncOS Software version 7.5.1-079:
ciscowsa> version Current Version =============== Product: Cisco IronPort S670 Web Security Appliance Model: S670 Version: 7.5.1-079
Products Confirmed Not Vulnerable
The following products are not affected by this vulnerability:
- Cisco Email Security Appliance (ESA), both virtual and hardware versions
- Cisco Security Mail Appliance (SMA), both virtual and hardware versions
-
No workarounds are available.
-
When considering software upgrades, customers are advised to consult the Cisco Security Advisories and Responses archive at http://www.cisco.com/go/psirt and review subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to upgrade contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
In the following table, the left column lists major releases of Cisco AsyncOS for WSA Software. The center column indicates whether a major release is affected by the vulnerability described in this advisory and the first minor release that includes the fix for this vulnerability. The right column indicates whether a major release is affected by all the vulnerabilities described in this and the following companion advisories and which release includes fixes for those vulnerabilities:
- cisco-sa-20151104-aos
- cisco-sa-20151104-wsa
- cisco-sa-20151104-wsa1
- cisco-sa-20151104-wsa2
- cisco-sa-20150612-esa
- cisco-sa-20151104-esa2
Cisco AsyncOS for WSA Major Release First Fixed Release for This Vulnerability First Fixed Release for This Vulnerability and All Vulnerabilities Described in the Companion Advisories Prior to 7.7 Not affected 7.7.0-761 or later
7.7
Not affected
7.7.0-761
8.0 8.0.8-113 8.0.8-113 or later 8.1 Affected; migrate to 8.5.3-051 or later Affected; migrate to 8.5.3-051 or later 8.5 8.5.3-051 8.5.3-051 or later 8.6 Affected; migrate to 8.7.0-171-LD or later Affected; migrate to 8.7.0-171-LD or later 8.7 8.7.0-171-LD 8.7.0-171-LD or later 8.8 8.8.0-085 8.8.0-085 or later 9.0 Not affected Not affected
In most cases a WSA can be updated over the network by using the System Upgrade options in the System Administration GUI. To upgrade a device by using the System Administration GUI:
- Choose System Administration > System Upgrade.
- Click Upgrade Options.
- Choose the option to Download and Install or, for an ESA, Download the upgrade.
- Choose the release to upgrade to.
- In the Upgrade Preparation area, choose the appropriate options.
- Click Proceed to begin the upgrade. A progress bar displays the status of the upgrade.
After the upgrade is complete, the device reboots.
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
-
This vulnerability was found during an internal security test.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Version Description Section Status Date 1.1 Added steps for upgrading a device by using the GUI. Fixed Software Final 2015-November-20 1.0 Initial public release. — Final 2015-November-04
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.