![](https://tools.cisco.com/security/center/images/blue-square.png)
AV:N/AC:L/Au:N/C:P/I:P/A:P/E:F/RL:OF/RC:C
-
A vulnerability in the web interface of Cisco Network Analysis Modules could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of the affected device with the privileges of the web server.
The vulnerability is due to a failure to properly sanitize user input prior to executing an external command derived from the input. An attacker could exploit the vulnerability by submitting a crafted HTTP request to the affected device. A successful exploit could allow the attacker to execute arbitrary commands or code on the underlying operating system with the reduced privileges of the web server.
Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available.
This advisory is available at the following link: http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20160601-prime
-
Vulnerable Products
- Cisco Prime Network Analysis Module (NAM) running any 6.2 software release prior to Release 6.2(1)
- Cisco Prime Network Analysis Module (NAM) running software releases 6.1(1) and prior if the final security patch for platforms running NAM 6.1(1) software (nam-security-patch.6.1-2-final) has not been applied
- Cisco Prime Virtual Network Analysis Module (vNAM) running any 6.2 software release prior to Release 6.2(1)
- Cisco Prime Virtual Network Analysis Module (vNAM) running software releases 6.1(1) and prior if the final security patch for platforms running NAM (nam-security-patch.6.1-2-final) has not been applied
Products Confirmed Not Vulnerable
No other Cisco products are currently known to be affected by this vulnerability.
-
There are no workarounds that address this vulnerability.
-
Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
http://www.cisco.com/en/US/docs/general/warranty/English/EU1KEN_.html
Additionally, customers may only download software for which they have a valid license, procured from Cisco directly or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.
When considering software upgrades, customers are advised to consult the Cisco Security Advisories and Responses archive at http://www.cisco.com/go/psirt and review subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to upgrade contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Customers Without Service Contracts
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco Technical Assistance Center (TAC):
http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html
Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
Fixed Releases
Customers should upgrade to an appropriate release as indicated in this section. To help ensure a complete upgrade solution, consider that this advisory is part of a collection that includes the following advisories:
cisco-sa-20160525-prime: Cisco Prime Network Analysis Module Unauthenticated Remote Code Execution Vulnerability
cisco-sa-20160525-prime3: Cisco Prime Network Analysis Module IPv6 Denial of Service Vulnerability
Version 6.1 of Cisco Prime NAM software is addressed via a patch named: nam-security-patch.6.1-2-final.i386.rpm
Version 6.2 of Cisco Prime NAM software is resolved with software release 6.2(1) and later.
The fixed software can be found via the Cisco Software Center in the following location:
Products > Cloud and Systems Management > Network Analysis Module (NAM) Products
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
-
This vulnerability was reported to Cisco by Daniel Jensen from Security-Assessment.com.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Version Description Section Status Date 1.0 Initial public release. — Final 2016-June-01
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.