![](https://sec.cloudapps.cisco.com/security/center/images/blue-square.png)
CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:L/A:N/E:X/RL:X/RC:X
-
A vulnerability in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass an access control list (ACL) that is configured for an interface of an affected device.
The vulnerability is due to errors that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit this vulnerability by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to access resources that are behind the affected device and would typically be protected by the interface ACL.There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20181003-asa-acl-bypass
-
Vulnerable Products
This vulnerability affects Cisco products that are running a vulnerable release of Cisco Adaptive Security Appliance (ASA) Software or Cisco Firepower Threat Defense (FTD) Software and meet all the following conditions:
- At least one interface ACL has the per-user-override feature (per-user-override) enabled.
- At least one remote access VPN connection profile or site-to-site VPN connection profile (tunnel-group) is configured and associated with a group policy (group-policy) that specifies a filter ACL (vpn-filter).
- A VPN tunnel that is associated with an affected connection profile (tunnel-group) is currently up.
Note: In Cisco FTD Software, the per-user-override feature can be enabled via FlexConfig only.
For information about affected software releases, consult the Cisco bug ID(s) at the top of this advisory.
Determine the Cisco ASA Software Release
To determine which Cisco ASA Software release is running on a device, administrators can log in to the device, use the show version command in the CLI, and refer to the output of the command. The following example shows the output of the command for a device that is running Cisco ASA Software Release 9.4(4):
ciscoasa# show version | include Version Cisco Adaptive Security Appliance Software Version 9.4(4) Device Manager Version 7.4(1) . . .
If a device is managed by using Cisco Adaptive Security Device Manager (ASDM), administrators can also determine which release is running on a device by referring to the release information in the table that appears in the Cisco ASDM log in window or the Device Dashboard tab of the Cisco ASDM Home pane.
Determine the Cisco FTD Software Release
To determine which Cisco FTD Software release is running on a device, administrators can log in to the device, use the show version command in the CLI, and refer to the output of the command. The following example shows the output of the command for a device that is running Cisco FTD Software Release 6.2.0:
> show version ---------------------[ ftd ]--------------------- Model : Cisco ASA5525-X Threat Defense (75) Version 6.2.0 (Build 362) UUID : 2849ba3c-ecb8-11e6-98ca-b9fc2975893c Rules update version : 2017-03-15-001-vrt VDB version : 279 ----------------------------------------------------
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
-
There are no workarounds that address this vulnerability.
-
For information about fixed software releases, consult the Cisco bug ID(s) at the top of this advisory.
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
-
This vulnerability was found during the resolution of a Cisco TAC support case.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Version Description Section Status Date 1.0 Initial public release. — Final 2018-October-03
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.