Summary

• A vulnerability in the IPv6 traffic processing of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an unexpected restart of the netstack process on an affected device.

  The vulnerability is due to improper validation of IPv6 traffic sent through an affected device. An attacker could exploit this vulnerability by sending a malformed IPv6 packet through an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition while the netstack process restarts. A sustained attack could lead to a reboot of the device.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190828-nxos-ipv6-dos

  This advisory is part of the August 2019 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication, which includes five Cisco Security Advisories that describe five vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: August 2019 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication.
  

Affected Products

• Vulnerable Products

  This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco NX-OS Software:

  • Nexus 7000 Series Switches
  • Nexus 7700 Series Switches

  For information about which Cisco NX-OS Software releases are vulnerable, see the Fixed Software section of this advisory.

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

  Cisco has confirmed that this vulnerability does not affect the following Cisco products:

  • Firepower 2100 Series
  • Firepower 4100 Series
  • Firepower 9300 Security Appliances
  • MDS 9000 Series Multilayer Switches
  • Nexus 1000 Virtual Edge for VMware vSphere
  • Nexus 1000V Switch for Microsoft Hyper-V
  • Nexus 1000V Switch for VMware vSphere
  • Nexus 3000 Series Switches
  • Nexus 3500 Platform Switches
  • Nexus 3600 Platform Switches
  • Nexus 5500 Platform Switches
  • Nexus 5600 Platform Switches
  • Nexus 6000 Series Switches
  • Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode
  • Nexus 9000 Series Switches in standalone NX-OS mode
  • Nexus 9500 R-Series Switching Platform
  • UCS 6200 Series Fabric Interconnects
  • UCS 6300 Series Fabric Interconnects
  • UCS 6400 Series Fabric Interconnects

Indicators of Compromise

• Exploitation of this vulnerability could cause an affected device to generate a core file of the /isan/bin/routing-sw/netstack process. To view device core files, administrators can use the show core command in the NX-OS CLI. To determine whether the device has been compromised by exploitation of this vulnerability, administrators are advised to contact the Cisco Technical Assistance Center (TAC) to review the core files.

Workarounds

• There are no workarounds that address this vulnerability.

Fixed Software

• Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
  https://www.cisco.com/c/en/us/products/end-user-license-agreement.html

  Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.

  When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Customers Without Service Contracts

  Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:
  https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

  Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.

  Fixed Releases

  Customers are advised to upgrade to an appropriate release as indicated in the applicable table in this section. To help ensure a complete upgrade solution, customers should consider that this advisory is part of a bundled publication. The following page provides a complete list of bundle advisories: Cisco Event Response: August 2019 Cisco FXOS and NX-OS Software Security Advisory Bundled Publication.

  In the following table(s), the left column lists releases of Cisco FXOS Software or Cisco NX-OS Software. The center column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability. The right column indicates whether a release is affected by all the vulnerabilities described in this bundle and which release includes fixes for those vulnerabilities.

  Nexus 7000 and 7700 Series Switches: CSCvn46719

  Cisco NX-OS Software Release	First Fixed Release for This Vulnerability	First Fixed Release for All Vulnerabilities Described in the Bundle of Advisories
  Earlier than 8.1	Not vulnerable	Not vulnerable
  8.1	8.2(3)	8.2(3)
  8.2	8.2(3)	8.2(3)
  8.3	Maintenance Upgrade n7000-s2-dk9.8.3.2.CSCvn46719.bin	8.4(1)
  8.4	Not vulnerable	Not vulnerable

  Additional Resources

  For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, administrators can refer to the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.

  Cisco MDS Series Switches
  Cisco Nexus 1000V for VMware Switch
  Cisco Nexus 3000 Series and 3500 Series Switches
  Cisco Nexus 5000 Series Switches
  Cisco Nexus 5500 Platform Switches
  Cisco Nexus 6000 Series Switches
  Cisco Nexus 7000 Series Switches
  Cisco Nexus 9000 Series Switches
  Cisco Nexus 9000 Series ACI-Mode Switches

  For help determining the best Cisco NX-OS Software release for Cisco UCS, refer to the Recommended Releases documents in the release notes for the device.

Exploitation and Public Announcements

• The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• This vulnerability was found during internal security testing.

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190828-nxos-ipv6-dos

Revision History

• Version	Description	Section	Status	Date
  1.0	Initial public release.	—	Final	2019-August-28

  Show Less

---