Summary

• A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software, formerly Firepower Management Center Software, could allow an authenticated, remote attacker with Administrator-level privileges to execute arbitrary commands on the underlying operating system.

  This vulnerability is due to insufficient input validation of certain HTTP request parameters that are sent to the web-based management interface. An attacker could exploit this vulnerability by authenticating to the Cisco FMC web-based management interface and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to execute commands as the root user on the affected device. To exploit this vulnerability, an attacker would need Administrator-level credentials.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fmc-cmd-inj-2HBkA97G

  This advisory is part of the October 2024 release of the Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2024 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

Affected Products

• Vulnerable Products

  At the time of publication, this vulnerability affected Cisco products if they were running a vulnerable release of Cisco FMC Software, regardless of device configuration.

  For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

  Cisco has confirmed that this vulnerability does not affect the following Cisco products:

  • Adaptive Security Appliance (ASA) Software
  • Firepower Threat Defense (FTD) Software
  • Next-Generation Intrusion Prevention System (NGIPS)

Details

• For Cisco products that are affected by this vulnerability, Administrator accounts have access to the underlying operating system through expert mode by default. On a system with the default configuration, an attacker would not gain any benefits from exploiting this vulnerability because all of the command execution capabilities would be available to them through legitimate means. However, for deployments that prevent administrators from accessing expert mode (for example, multi-instance deployments or systems that are configured with the system lockdown-sensor command), an attacker could exploit this vulnerability to regain access to the expert mode command prompt.

Workarounds

• There are no workarounds that address this vulnerability.

Fixed Software

• When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Cisco ASA, FMC, and FTD Software

  To help customers determine their exposure to vulnerabilities in Cisco ASA, FMC, and FTD Software, Cisco provides the Cisco Software Checker. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities that are described in all the advisories that the Software Checker identifies (“Combined First Fixed”).

  To use the tool, go to the Cisco Software Checker page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:

  1. Choose which advisories the tool will search—all advisories, only advisories with a Critical or High Security Impact Rating (SIR), or only this advisory.
  2. Choose the appropriate software.
  3. Choose the appropriate platform.
  4. Enter a release number—for example, 9.16.2.11 for Cisco ASA Software or 6.6.7 for Cisco FTD Software.
  5. Click Check.

  Only this advisory All Critical and High advisories All advisories Cisco ASA Software Cisco FMC Software Cisco FTD Software Any Platform 3000 Series Industrial Security Appliances (ISA) ASA 5500-X Series Firewalls ASA Service Module Adaptive Security Virtual Appliance (ASAv) Firepower 1000 Series Firepower 2100 Series Firepower 4100 Series Firepower 9000 Series Secure Firewall 3100 Series

   

   

  Additional Resources

  For help determining the best Cisco ASA, FMC, or FTD Software release, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.

  Cisco ASA Compatibility
  Cisco Secure Firewall ASA Upgrade Guide
  Cisco Secure Firewall Threat Defense Compatibility Guide

Exploitation and Public Announcements

• The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• Cisco would like to thank Kentaro Kawane of GMO Cybersecurity by Ierae for reporting this vulnerability.

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fmc-cmd-inj-2HBkA97G

Revision History

• Version	Description	Section	Status	Date
  1.0	Initial public release.	—	Final	2024-OCT-23

  Show Less

---